GitHub/mt8127/android_kernel_alcatel_ttab.git
17 years agos3c2410fb: byte ordering fixes
Krzysztof Helt [Tue, 16 Oct 2007 08:29:02 +0000 (01:29 -0700)]
s3c2410fb: byte ordering fixes

This patch sets correct bits related to the byte ordering of the
framebuffer.  This was tested on little endian kernel only.  The big endian
kernel may require different settings.

The patch also adds 32 bpp mode which is called 24 bpp by Samsung.  One
pixel takes 32 bits but only 24 bits are used in this mode.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: fix missing registers offset
Krzysztof Helt [Tue, 16 Oct 2007 08:29:01 +0000 (01:29 -0700)]
s3c2410fb: fix missing registers offset

This patch adds missing virtual register offsets where
appropriate. This fixes crashes in the driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: remove lcdcon2 and lcdcon3 register fields
Krzysztof Helt [Tue, 16 Oct 2007 08:29:01 +0000 (01:29 -0700)]
s3c2410fb: remove lcdcon2 and lcdcon3 register fields

This patch removes unused lcdcon2 and lcdcon3 register value
from the s3c2410fb_display structure.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: add pulse length fields to s3c2410fb_display
Krzysztof Helt [Tue, 16 Oct 2007 08:29:00 +0000 (01:29 -0700)]
s3c2410fb: add pulse length fields to s3c2410fb_display

This patch adds synchronization pulse lenght fields to
the s3c2410fb_display structure and makes use of them
in the driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: use vertical margins values
Krzysztof Helt [Tue, 16 Oct 2007 08:28:59 +0000 (01:28 -0700)]
s3c2410fb: use vertical margins values

This patch makes use of vertical margins fields in
the s3c2410fb_display structure.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: add vertical margins fields to s3c2410fb_display
Krzysztof Helt [Tue, 16 Oct 2007 08:28:59 +0000 (01:28 -0700)]
s3c2410fb: add vertical margins fields to s3c2410fb_display

This patch adds vertical margins values to all
s3c24xx platform.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: remove lcdcon3 register from s3c2410fb_display
Krzysztof Helt [Tue, 16 Oct 2007 08:28:58 +0000 (01:28 -0700)]
s3c2410fb: remove lcdcon3 register from s3c2410fb_display

This patch removes unused lcdcon3 register from the
s3c2410fb_display structure.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: use new margin fields
Krzysztof Helt [Tue, 16 Oct 2007 08:28:57 +0000 (01:28 -0700)]
s3c2410fb: use new margin fields

This patch makes use of margins fields in the s3c2410fb_display
structure.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: add margin fields to s3c2410fb_display
Krzysztof Helt [Tue, 16 Oct 2007 08:28:57 +0000 (01:28 -0700)]
s3c2410fb: add margin fields to s3c2410fb_display

This patch adds margins fields to the s3c2410fb_display
structure. It also sets display type and horizontal
margins in all platform files that use the s3c2410fb
driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: multi-display support
Krzysztof Helt [Tue, 16 Oct 2007 08:28:56 +0000 (01:28 -0700)]
s3c2410fb: multi-display support

This patch adds a new structure to describe and handle
more than one panel (display mode) for the s3c2410 framebuffer.
This structure is added after the pxafb driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: remove fb_info pointer from s3c2410fb_info
Krzysztof Helt [Tue, 16 Oct 2007 08:28:55 +0000 (01:28 -0700)]
s3c2410fb: remove fb_info pointer from s3c2410fb_info

This patch removes redundant fb field from
the s3c2410fb_info structure. This breaks circular
reference fb_info -> s3c2410fb_info -> fb_info again.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agos3c2410fb: code cleanup
Krzysztof Helt [Tue, 16 Oct 2007 08:28:54 +0000 (01:28 -0700)]
s3c2410fb: code cleanup

This patch cleans up the driver a bit. It contains
coding style fixes (pointed by Lindent and checkpatch),
white space clean ups and few minor code improvements.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm3fb: hardware cursor support
Krzysztof Helt [Tue, 16 Oct 2007 08:28:54 +0000 (01:28 -0700)]
pm3fb: hardware cursor support

This patch adds hardware cursor support to the pm3fb driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm2fb: Permedia 2V hardware cursor support
Krzysztof Helt [Tue, 16 Oct 2007 08:28:53 +0000 (01:28 -0700)]
pm2fb: Permedia 2V hardware cursor support

This patch adds hardware cursor support for Permedia 2V chips.
The hardware cursor is disabled by default. It does not blink - the
same issue is mentioned in the x11 driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agofbdev: fb_create_modedb() non-static `int first = 1;'
Geert Uytterhoeven [Tue, 16 Oct 2007 08:28:52 +0000 (01:28 -0700)]
fbdev: fb_create_modedb() non-static `int first = 1;'

Looking at the code flow, `int first' in fb_create_modedb() should be static.

[adaplas]
Better for 'int first' to be moved outside the loop.

[akpm@linux-foundation.org: kill stray semicolon]
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agodrivers/video/geode/lxfb_core.c: fix lxfb_setup warning
Eugene Teo [Tue, 16 Oct 2007 08:28:51 +0000 (01:28 -0700)]
drivers/video/geode/lxfb_core.c: fix lxfb_setup warning

drivers/video/geode/lxfb_core.c: In function 'lxfb_setup':
drivers/video/geode/lxfb_core.c:564: warning: unused variable 'opt'

Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm3fb: checkpatch fixes
Krzysztof Helt [Tue, 16 Oct 2007 08:28:51 +0000 (01:28 -0700)]
pm3fb: checkpatch fixes

This patch fixes all errors detected by checkpatch.pl script in the pm3fb.c
file.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm2fb: checkpatch fixes
Krzysztof Helt [Tue, 16 Oct 2007 08:28:50 +0000 (01:28 -0700)]
pm2fb: checkpatch fixes

This patch fixes all errors detected by checkpatch.pl script in the pm2fb.c
file.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agotdfxfb: mtrr support
Krzysztof Helt [Tue, 16 Oct 2007 08:28:49 +0000 (01:28 -0700)]
tdfxfb: mtrr support

This patch adds mtrr support to the tdfxfb driver.  It also kills one
redundant include and initialization value.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agotdfxfb: hardware cursor
Krzysztof Helt [Tue, 16 Oct 2007 08:28:48 +0000 (01:28 -0700)]
tdfxfb: hardware cursor

This patch adds hardware cursor support to the tdfxfb driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agotdfxfb: code improvements
Krzysztof Helt [Tue, 16 Oct 2007 08:28:48 +0000 (01:28 -0700)]
tdfxfb: code improvements

This patch improves source code mainly by killing redundant variable loads,
reducing number of variables, simplifying conditional branches, etc.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agofbdev: Fix incorrect timings in some modedb entries
Antonino A. Daplas [Tue, 16 Oct 2007 08:28:47 +0000 (01:28 -0700)]
fbdev: Fix incorrect timings in some modedb entries

Reported by: John Lumby <johnlumby@hotmail.com>

Some of the entries in the mode database does not match the comments and/or
the refresh field.  Adjust the timings so they match with both the comments
and the refresh rate.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agounexport fb_prepare_logo
Adrian Bunk [Tue, 16 Oct 2007 08:28:47 +0000 (01:28 -0700)]
unexport fb_prepare_logo

The logo code is not and should not be used by modules.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoradeon_driver_vblank_do_wait() static
Adrian Bunk [Tue, 16 Oct 2007 08:28:46 +0000 (01:28 -0700)]
radeon_driver_vblank_do_wait() static

radeon_driver_vblank_do_wait() can become static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agotdfxfb: palette fixes
Krzysztof Helt [Tue, 16 Oct 2007 08:28:46 +0000 (01:28 -0700)]
tdfxfb: palette fixes

This patch fixes:
- palette setting in 8-bit mode (aka 'funky penguin')
- grayscale handling
- adds proper barriers in xxx_inb/outb functions

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agotdfxfb: 3 fixes
Krzysztof Helt [Tue, 16 Oct 2007 08:28:45 +0000 (01:28 -0700)]
tdfxfb: 3 fixes

This patch fixes 3 issues:
- transparency handling in tdfxfb
- panning with more than 4096 virtual height and acceleration (acceleration
with x & y > 4096)
- exit paths on errors in tdfxfb_probe()

Additionally it sets a FBINFO_READS_FAST flag to use smart blitter scrolling
(speed up on tdfxfb).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agotdfxfb: coding style improvement
Krzysztof Helt [Tue, 16 Oct 2007 08:28:43 +0000 (01:28 -0700)]
tdfxfb: coding style improvement

This patch contains coding style improvements to the tdfxfb driver (white
spaces, indentations, long lines).

It also moves fb_ops structure to the end of file, so forward declarations of
ops functions are redundant.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agotridentfb: coding style improvement
Krzysztof Helt [Tue, 16 Oct 2007 08:28:42 +0000 (01:28 -0700)]
tridentfb: coding style improvement

This patch contains coding style improvements to the tridentfb driver (white
spaces, indentations, long lines).

It also moves fb_ops structure after fb api functions are defined.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopxafb: Add support for other palette formats
Hans J. Koch [Tue, 16 Oct 2007 08:28:41 +0000 (01:28 -0700)]
pxafb: Add support for other palette formats

This patch adds support for the other three palette formats possible with
the PXA LCD controller. This is required on boards where an LCD is connected
with all its 18 bits. With this patch, it's possible to use an 8-bit mode
with 18-bit palette entries. This used to be possible in 2.4 kernels but
disappeared in 2.6. With current kernels, you can only get wrong colours
out of an LCD connected this way.

Users can choose the palette format by doing something like this
in their board definition:

static struct pxafb_mach_info my_fb_info = {
        [...]
        .lccr3          = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_PDFOR_3,
        .lccr4          = LCCR4_PAL_FOR_2,
        [...]
};

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agombxfb: Improvements and new features
Raphael Assenat [Tue, 16 Oct 2007 08:28:40 +0000 (01:28 -0700)]
mbxfb: Improvements and new features

This contains the following changes:

* Overlay surface alpha is configured separately from the overlay. This
prevents display glitches (configure and fill the overlay first, set
alpha to a visible value next)

* Added an ioctl for configuring transparency of the Overlay and graphics
planes. Blend mode, colorkey mode and global alpha mode are supported.

* Added an ioctl for setting the plane order. The overlay plance can be placed
over or
under the graphics plane.

* Added an ioctl for setting and reading chip registers, with mask.

* Updated copyright for 2007

[adaplas]
* Coding style changes

Signed-off-by: Raphael Assenat <raph@8d.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agosm501fb: Ensure panel interface is not tristated when setup
Ben Dooks [Tue, 16 Oct 2007 08:28:39 +0000 (01:28 -0700)]
sm501fb: Ensure panel interface is not tristated when setup

When we setup the panel interface whilst configuring the
framebuffer, we should ensure the panel interface is not
in tristate, in case the bootloader or previous setup has
not enabled it.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agosm501fb: Call fb suspend function during suspend and resume
Ben Dooks [Tue, 16 Oct 2007 08:28:38 +0000 (01:28 -0700)]
sm501fb: Call fb suspend function during suspend and resume

Call the fb_set_suspend() over suspend and resume.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agosm501fb: update suspend and resume code
Ben Dooks [Tue, 16 Oct 2007 08:28:37 +0000 (01:28 -0700)]
sm501fb: update suspend and resume code

The suspend and resume code is failing to restore the CRT control
register, thus causing the CRT data-path to get changed if the
SM501 experiences a reset over suspend.

Also move some of the debug messages to dev_dbg() level and ensure
that the suspend code does not try and restore anything it did not
manage to save.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm2fb: accelerated 24-bit fillrect
Krzysztof Helt [Tue, 16 Oct 2007 08:28:36 +0000 (01:28 -0700)]
pm2fb: accelerated 24-bit fillrect

This patch adds accelerated fillrect for 24-bit depth.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm2fb: Permedia 2V initialization fixes
Krzysztof Helt [Tue, 16 Oct 2007 08:28:36 +0000 (01:28 -0700)]
pm2fb: Permedia 2V initialization fixes

This patch:
- initializes correctly the Permedia2V chip if it is not initialized by BIOS
- puts back clock frequency for the ELSA WINNER board to 100kHz
- fixes returned error values from setcolreg() function
- uses more general classes for PCI ids

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm2fb: source code improvements
Krzysztof Helt [Tue, 16 Oct 2007 08:28:34 +0000 (01:28 -0700)]
pm2fb: source code improvements

This patch concentrates on source compacting, simplification and more
conformance to kernel coding standards.
The major changes:
- RD32() and WR() functions are merged into pm2_RD() and pm2_WR()
- conditional (with switch()) RDAC functions are separated in two
unconditional ones
- the conditional pm2fb_block_op() function is merged into pm2fb_fillrect()
and pm2fb_copyarea()
- WAIT_FIFO() values are corrected

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm2fb: accelerated imageblit
Krzysztof Helt [Tue, 16 Oct 2007 08:28:34 +0000 (01:28 -0700)]
pm2fb: accelerated imageblit

This patch adds accelerated imageblit function.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm3fb: mtrr support and noaccel option
Krzysztof Helt [Tue, 16 Oct 2007 08:28:33 +0000 (01:28 -0700)]
pm3fb: mtrr support and noaccel option

This patch adds usage of MTRR registers and two new options: noaccel and
nomtrr.

[bunk@kernel.org: make pm3fb_init() static again]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm3fb: improvements and cleanups
Krzysztof Helt [Tue, 16 Oct 2007 08:28:32 +0000 (01:28 -0700)]
pm3fb: improvements and cleanups

This patch contains improvements:
- it adds ROP_XOR in pm3fb_fillrect()
- it conforms closer to coding style
- it removes redundant parentheses and setting bits with 0 value
- it checks if hardware acceleration is disabled in pm3fb_imageblit
- it adds module description

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm3fb: 3 small fixes
Krzysztof Helt [Tue, 16 Oct 2007 08:28:32 +0000 (01:28 -0700)]
pm3fb: 3 small fixes

This patch contains 3 small improvements:
- it corrects scan line width calculation in pm3fb_imageblit()
- it corrects mmio mapping for big endian machines
- it enables panning acceleration constants

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm3fb: imageblit improved
Krzysztof Helt [Tue, 16 Oct 2007 08:28:31 +0000 (01:28 -0700)]
pm3fb: imageblit improved

This patch removes the pm3_imageblit() restriction to blit only images with
width divisable by 32.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm3fb: header file reduction
Krzysztof Helt [Tue, 16 Oct 2007 08:28:31 +0000 (01:28 -0700)]
pm3fb: header file reduction

This patch removes constants named AAA_DISABLE with value 0. They are redudant
and misleading ( a |= AAA_DISABLE does nothing and usually should be
a &= ~AAA_ENABLE).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoskeletonfb: wrong field name fix
Krzysztof Helt [Tue, 16 Oct 2007 08:28:30 +0000 (01:28 -0700)]
skeletonfb: wrong field name fix

This patch corrects name of the field.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agopm3fb: copyarea and partial imageblit suppor
Krzysztof Helt [Tue, 16 Oct 2007 08:28:29 +0000 (01:28 -0700)]
pm3fb: copyarea and partial imageblit suppor

This patch adds accelerated copyarea and partially accelerated imageblit
functions. There is also fixed one register address in the pm3fb.h file.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agouvesafb: documentation
Michal Januszewski [Tue, 16 Oct 2007 08:28:28 +0000 (01:28 -0700)]
uvesafb: documentation

Documentation for the uvesafb driver.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agouvesafb: the driver core
Michal Januszewski [Tue, 16 Oct 2007 08:28:26 +0000 (01:28 -0700)]
uvesafb: the driver core

uvesafb is an enhanced version of vesafb.  It uses a userspace helper (v86d)
to execute calls to the x86 Video BIOS functions.  The driver is not limited
to any specific arch and whether it works on a given arch or not depends on
that arch being supported by the userspace daemon.  It has been tested on
x86_32 and x86_64.

A single BIOS call is represented by an instance of the uvesafb_ktask
structure.  This structure contains a buffer, a completion struct and a
uvesafb_task substructure, containing the values of the x86 registers, a flags
field and a field indicating the length of the buffer.  Whenever a BIOS call
is made in the driver, uvesafb_exec() builds a message using the uvesafb_task
substructure and the contents of the buffer.  This message is then assigned a
random ack number and sent to the userspace daemon using the connector
interface.

The message's sequence number is used as an index for the uvfb_tasks array,
which provides a mapping from the messages coming from userspace to the
in-kernel uvesafb_ktask structs.

The userspace daemon performs the requested operation and sends a reply in the
form of a uvesafb_task struct and, optionally, a buffer.  The seq and ack
numbers in the reply should be exactly the same as those in the request.

Each message from userspace is processed by uvesafb_cn_callback() and after
passing a few sanity checks leads to the completion of a BIOS call request.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agouvesafb: add connector entries
Michal Januszewski [Tue, 16 Oct 2007 08:28:25 +0000 (01:28 -0700)]
uvesafb: add connector entries

Add connector idx and val constants for v86d and uvesafb.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoconnector: change connector's max message size
Michal Januszewski [Tue, 16 Oct 2007 08:28:24 +0000 (01:28 -0700)]
connector: change connector's max message size

Change the maximum message size to 16k to allow transfers of VBE
data blocks from userspace.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agofbdev: export fb_destroy_modelist
Michal Januszewski [Tue, 16 Oct 2007 08:28:23 +0000 (01:28 -0700)]
fbdev: export fb_destroy_modelist

Make fb_destroy_modelist an exported symbol for use in the uvesafb driver.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc: allow validated RTC_PIE_ON for non-root
Bryan Kadzban [Tue, 16 Oct 2007 08:28:23 +0000 (01:28 -0700)]
rtc: allow validated RTC_PIE_ON for non-root

drivers/char/rtc.c allowed RTC_PIE_ON ioctls for non-root users, as long as
the current interval (set via RTC_IRQP_SET) is <= max_user_freq.  Allow
RTC_PIE_ON under the same conditions when /dev/rtc* is handled by the rtc
subsystem.

Signed-off-by: Bryan Kadzban <bryan@kdzbn.homelinux.net>
Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc: add max_user_freq to sysfs
Bryan Kadzban [Tue, 16 Oct 2007 08:28:22 +0000 (01:28 -0700)]
rtc: add max_user_freq to sysfs

drivers/char/rtc.c exposed a sysctl to change the maximum frequency at
which a non-root user could ask the RTC to generate interrupts (via the
RTC_IRQP_SET ioctl).  This value is no longer available under the new RTC
subsystem, so add it to sysfs for each RTC device.

Works for me on x86_64 (both reads and writes), using rtc-cmos.

Signed-off-by: Bryan Kadzban <bryan@kdzbn.homelinux.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc-cmos probe() cleanup
David Brownell [Tue, 16 Oct 2007 08:28:21 +0000 (01:28 -0700)]
rtc-cmos probe() cleanup

Some cleanups for the rtc-cmos probe logic:

 - Claim i/o ports with request_region() not request_resource(),
   for better coexistence betwen platform and pnp bus glues.

 - Claim those ports earlier, to help work around procfs bugs
   (it allows duplicate names, like /proc/driver/rtc).

 - Fix some glitches in cleanup code, notably a cut'n'paste-o
   where the i/o port region might not get released during
   cleanup after a probe fault.

And some comment clarifications, including noting that this code
must work with PNPBIOS not just PNPACPI..

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc: fix readback from /sys/class/rtc/rtc?/wakealarm
Mark Lord [Tue, 16 Oct 2007 08:28:21 +0000 (01:28 -0700)]
rtc: fix readback from /sys/class/rtc/rtc?/wakealarm

Fix readback of RTC alarms on platforms which return -1 in
non-hardware-supported RTC alarm fields.

To fill in the missing (-1) values, we grab an RTC timestamp along with the
RTC alarm value, and use the timestamp fields to populate the missing alarm
fields.

To counter field-wrap races (since the timestamp and alarm are not read
together atomically), we read the RTC timestamp both before and after
reading the RTC alarm value, and then check for wrapped fields --> if any
have wrapped, we know we have a possible inconsistency, so we loop and
reread the timestamp and alarm again.

Wrapped fields in the RTC timestamps are an issue because rtc-cmos.c, for
example, also gets/uses an RTC timestamp internally while fetching the RTC
alarm.  If our timestamp here wasn't the same (minutes and higher) as what
was used internally there, then we might end up populating the -1 fields
with inconsistent values.

This fixes readbacks from /sys/class/rtc/rtc?/wakealarm, as well as other
code paths which call rtc_read_alarm().

Signed-off-by: Mark Lord <mlord@pobox.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc: RTC class driver for the ds1374
Scott Wood [Tue, 16 Oct 2007 08:28:19 +0000 (01:28 -0700)]
rtc: RTC class driver for the ds1374

This patch adds an RTC class driver for the Maxim/Dallas 1374 RTC chip,
based on drivers/i2c/chips/ds1374.c.  It supports alarm functionality.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc-pcf8583: Check for i2c adapter functionality
Jean Delvare [Tue, 16 Oct 2007 08:28:18 +0000 (01:28 -0700)]
rtc-pcf8583: Check for i2c adapter functionality

Not all i2c adapters support I2C-level messaging.  Check that the adapter
does before probing for a PCF8583 chip, as the driver makes use of
i2c_transfer and i2c_master_send.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc: make rtc-ds1742 driver hotplug-aware
Atsushi Nemoto [Tue, 16 Oct 2007 08:28:18 +0000 (01:28 -0700)]
rtc: make rtc-ds1742 driver hotplug-aware

The rtc-ds1742 platform driver name doesn't match its module name,
which might prevents it from properly hotplugging.  There is only two
in-tree user of its driver, which are fixed by this patch too.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc: make rtc-ds1553 driver hotplug-aware
Atsushi Nemoto [Tue, 16 Oct 2007 08:28:17 +0000 (01:28 -0700)]
rtc: make rtc-ds1553 driver hotplug-aware

The rtc-ds1553 platform driver name doesn't match its module name, which
might prevent it from properly hotplugging.  This driver has no in-tree
users.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc-dev: no need to convert file->private_data to rtc device
Mark Zhan [Tue, 16 Oct 2007 08:28:17 +0000 (01:28 -0700)]
rtc-dev: no need to convert file->private_data to rtc device

In rtc-dev.c, when a rtc device is opened, file->private_data is already
attached with the rtc device pointer, so there is no need to call
to_rtc_device() to convert file->private_data to a rtc device pointer.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agortc_irq_set_freq() requires power-of-two and associated kerneldoc
David Brownell [Tue, 16 Oct 2007 08:28:16 +0000 (01:28 -0700)]
rtc_irq_set_freq() requires power-of-two and associated kerneldoc

RTC periodic IRQs are only defined to work for 2^N Hz values.  This patch
moves that validity check into the infrastructure, so drivers don't need to
check it; and adds kerneldoc for the two interface functions related to
periodic IRQs.  (One of which was quite mysterious until its first use was
recently checked in!)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoRTC: periodic irq fix
Alessandro Zummo [Tue, 16 Oct 2007 08:28:15 +0000 (01:28 -0700)]
RTC: periodic irq fix

Add kernel/kernel and kernel/user locking for the periodic irq feature of
the rtc class.

PIE ioctls are also supported.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoecryptfs: clean up page flag handling
Michael Halcrow [Tue, 16 Oct 2007 08:28:14 +0000 (01:28 -0700)]
ecryptfs: clean up page flag handling

The functions that eventually call down to ecryptfs_read_lower(),
ecryptfs_decrypt_page(), and ecryptfs_copy_up_encrypted_with_header()
should have the responsibility of managing the page Uptodate
status. This patch gets rid of some of the ugliness that resulted from
trying to push some of the page flag setting too far down the stack.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: replace magic numbers
Michael Halcrow [Tue, 16 Oct 2007 08:28:14 +0000 (01:28 -0700)]
eCryptfs: replace magic numbers

Replace some magic numbers with sizeof() equivalents.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: remove unused functions and kmem_cache
Michael Halcrow [Tue, 16 Oct 2007 08:28:13 +0000 (01:28 -0700)]
eCryptfs: remove unused functions and kmem_cache

The switch to read_write.c routines and the persistent file make a number of
functions unnecessary.  This patch removes them.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: initialize persistent lower file on inode create
Michael Halcrow [Tue, 16 Oct 2007 08:28:12 +0000 (01:28 -0700)]
eCryptfs: initialize persistent lower file on inode create

Initialize persistent lower file on inode create.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: fix data types
Michael Halcrow [Tue, 16 Oct 2007 08:28:12 +0000 (01:28 -0700)]
eCryptfs: fix data types

Update data types and add casts in order to avoid potential overflow
issues.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: convert mmap functions to use persistent file
Michael Halcrow [Tue, 16 Oct 2007 08:28:11 +0000 (01:28 -0700)]
eCryptfs: convert mmap functions to use persistent file

Convert readpage, prepare_write, and commit_write to use read_write.c
routines.  Remove sync_page; I cannot think of a good reason for implementing
that in eCryptfs.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: make open, truncate, and setattr use persistent file
Michael Halcrow [Tue, 16 Oct 2007 08:28:10 +0000 (01:28 -0700)]
eCryptfs: make open, truncate, and setattr use persistent file

Rather than open a new lower file for every eCryptfs file that is opened,
truncated, or setattr'd, instead use the existing lower persistent file for
the eCryptfs inode.  Change truncate to use read_write.c functions.  Change
ecryptfs_getxattr() to use the common ecryptfs_getxattr_lower() function.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: update metadata read/write functions
Michael Halcrow [Tue, 16 Oct 2007 08:28:10 +0000 (01:28 -0700)]
eCryptfs: update metadata read/write functions

Update the metadata read/write functions and grow_file() to use the
read_write.c routines.  Do not open another lower file; use the persistent
lower file instead.  Provide a separate function for
crypto.c::ecryptfs_read_xattr_region() to get to the lower xattr without
having to go through the eCryptfs getxattr.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: set up and destroy persistent lower file
Michael Halcrow [Tue, 16 Oct 2007 08:28:09 +0000 (01:28 -0700)]
eCryptfs: set up and destroy persistent lower file

This patch sets up and destroys the persistent lower file for each eCryptfs
inode.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: replace encrypt, decrypt, and inode size write
Michael Halcrow [Tue, 16 Oct 2007 08:28:08 +0000 (01:28 -0700)]
eCryptfs: replace encrypt, decrypt, and inode size write

Replace page encryption and decryption routines and inode size write routine
with versions that utilize the read_write.c functions.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: read_write.c routines
Michael Halcrow [Tue, 16 Oct 2007 08:28:07 +0000 (01:28 -0700)]
eCryptfs: read_write.c routines

Add a set of functions through which all I/O to lower files is consolidated.
This patch adds a new inode_info reference to a persistent lower file for each
eCryptfs inode; another patch later in this series will set that up.  This
persistent lower file is what the read_write.c functions use to call
vfs_read() and vfs_write() on the lower filesystem, so even when reads and
writes come in through aops->readpage and aops->writepage, we can satisfy them
without resorting to direct access to the lower inode's address space.
Several function declarations are going to be changing with this patchset.
For now, in order to keep from breaking the build, I am putting dummy
parameters in for those functions.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoecryptfs: fix error handling
Michael Halcrow [Tue, 16 Oct 2007 08:28:07 +0000 (01:28 -0700)]
ecryptfs: fix error handling

The error paths and the module exit code need work. sysfs
unregistration is not the right place to tear down the crypto
subsystem, and the code to undo subsystem initializations on various
error paths is unnecessarily duplicated. This patch addresses those
issues.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: remove assignments in if-statements
Michael Halcrow [Tue, 16 Oct 2007 08:28:06 +0000 (01:28 -0700)]
eCryptfs: remove assignments in if-statements

Remove assignments in if-statements.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: remove header_extent_size
Michael Halcrow [Tue, 16 Oct 2007 08:28:05 +0000 (01:28 -0700)]
eCryptfs: remove header_extent_size

There is no point to keeping a separate header_extent_size and an extent_size.
 The total size of the header can always be represented as some multiple of
the regular data extent size.

[randy.dunlap@oracle.com: ecryptfs: fix printk format warning]
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: Use generic_file_splice_read()
Michael Halcrow [Tue, 16 Oct 2007 08:28:04 +0000 (01:28 -0700)]
eCryptfs: Use generic_file_splice_read()

eCryptfs is currently just passing through splice reads to the lower
filesystem.  This is obviously incorrect behavior; the decrypted data is
what needs to be read, not the lower encrypted data.  I cannot think of any
good reason for eCryptfs to implement splice_read, so this patch points the
eCryptfs fops splice_read to use generic_file_splice_read.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Reviewed-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: make needlessly global symbols static
Michael Halcrow [Tue, 16 Oct 2007 08:28:04 +0000 (01:28 -0700)]
eCryptfs: make needlessly global symbols static

Andrew Morton wrote:
> Please check that all the newly-added global symbols do indeed need
> to be global.

Change symbols in keystore.c and crypto.o to static if they do not
need to be global.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: remove unnecessary variable initializations
Michael Halcrow [Tue, 16 Oct 2007 08:28:03 +0000 (01:28 -0700)]
eCryptfs: remove unnecessary variable initializations

Andrew Morton wrote:
> >       struct mutex *tfm_mutex = NULL;
>
> This initialisation looks like it's here to kill bogus gcc warning
> (if it is, it should have been commented).  Please investigate
> uninitialized_var() and __maybe_unused sometime.

Remove some unnecessary variable initializations. There may be a few
more such intializations remaining in the code base; a future patch
will take care of those.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: kerneldoc fixes for crypto.c and keystore.c
Michael Halcrow [Tue, 16 Oct 2007 08:28:02 +0000 (01:28 -0700)]
eCryptfs: kerneldoc fixes for crypto.c and keystore.c

Andrew Morton wrote:
From: mhalcrow@us.ibm.com <mhalcrow@halcrow.austin.ibm.com>
> > +/**
> > + * decrypt_passphrase_encrypted_session_key - Decrypt the session key
> > + * with the given auth_tok.
> >   *
> >   * Returns Zero on success; non-zero error otherwise.
> >   */
>
> That comment purports to be a kerneldoc-style comment.  But
>
> - kerneldoc doesn't support multiple lines on the introductory line
>   which identifies the name of the function (alas).  So you'll need to
>   overflow 80 cols here.
>
> - the function args weren't documented
>
> But the return value is!  People regularly forget to do that.  And
> they frequently forget to document the locking prerequisites and the
> permissible calling contexts (process/might_sleep/hardirq, etc)
>
> (please check all ecryptfs kerneldoc for this stuff sometime)

This patch cleans up some of the existing comments and makes a couple
of line break tweaks. There is more work to do to bring eCryptfs into
full kerneldoc-compliance.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: comments for some structs
Michael Halcrow [Tue, 16 Oct 2007 08:28:01 +0000 (01:28 -0700)]
eCryptfs: comments for some structs

Andrew Morton wrote:
> > +struct ecryptfs_global_auth_tok {
> > +#define ECRYPTFS_AUTH_TOK_INVALID 0x00000001
> > +     u32 flags;
> > +     struct list_head mount_crypt_stat_list;
> > +     struct key *global_auth_tok_key;
> > +     struct ecryptfs_auth_tok *global_auth_tok;
> > +     unsigned char sig[ECRYPTFS_SIG_SIZE_HEX + 1];
> > +};
> > +
> > +struct ecryptfs_key_tfm {
> > +     struct crypto_blkcipher *key_tfm;
> > +     size_t key_size;
> > +     struct mutex key_tfm_mutex;
> > +     struct list_head key_tfm_list;
> > +     unsigned char cipher_name[ECRYPTFS_MAX_CIPHER_NAME_SIZE + 1];
> > +};
>
> Please consider commenting your struct fields carefully: it's a
> great way to help other to understand your code.

Add some comments to the ecryptfs_global_auth_tok and ecryptfs_key_tfm
structs to make their functions more easily ascertained.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: grammatical fix (destruct to destroy)
Michael Halcrow [Tue, 16 Oct 2007 08:28:01 +0000 (01:28 -0700)]
eCryptfs: grammatical fix (destruct to destroy)

Andrew Morton wrote:
> > +int ecryptfs_destruct_crypto(void)
>
> ecryptfs_destroy_crypto would be more grammatically correct ;)

Grammatical fix for some function names.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: collapse flag set into one statement
Michael Halcrow [Tue, 16 Oct 2007 08:28:00 +0000 (01:28 -0700)]
eCryptfs: collapse flag set into one statement

Andrew Morton wrote:
> > +     crypt_stat->flags |= ECRYPTFS_ENCRYPTED;
> > +     crypt_stat->flags |= ECRYPTFS_KEY_VALID;
>
> Maybe the compiler can optimise those two statements, but we'd
> normally provide it with some manual help.

This patch provides the compiler with some manual help for
optimizing the setting of some flags.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: remove unnecessary BUG_ON
Michael Halcrow [Tue, 16 Oct 2007 08:28:00 +0000 (01:28 -0700)]
eCryptfs: remove unnecessary BUG_ON

Andrew Morton wrote:
> > +     mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
> > +     BUG_ON(mount_crypt_stat->num_global_auth_toks == 0);
> > +     mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
>
> That's odd-looking.  If it was a bug for num_global_auth_toks to be
> zero, and if that mutex protects num_global_auth_toks then as soon
> as the lock gets dropped, another thread can make
> num_global_auth_toks zero, hence the bug is present.  Perhaps?

That was serving as an internal sanity check that should not have made
it into the final patch set in the first place. This patch removes it.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoecryptfs: printk warning fixes
Andrew Morton [Tue, 16 Oct 2007 08:27:59 +0000 (01:27 -0700)]
ecryptfs: printk warning fixes

fs/ecryptfs/keystore.c: In function 'parse_tag_1_packet':
fs/ecryptfs/keystore.c:557: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'parse_tag_3_packet':
fs/ecryptfs/keystore.c:690: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'parse_tag_11_packet':
fs/ecryptfs/keystore.c:836: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'write_tag_1_packet':
fs/ecryptfs/keystore.c:1413: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c:1413: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
fs/ecryptfs/keystore.c: In function 'write_tag_11_packet':
fs/ecryptfs/keystore.c:1472: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'write_tag_3_packet':
fs/ecryptfs/keystore.c:1663: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c:1663: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
fs/ecryptfs/keystore.c: In function 'ecryptfs_generate_key_packet_set':
fs/ecryptfs/keystore.c:1778: warning: passing argument 2 of 'write_tag_11_packet' from incompatible pointer type
fs/ecryptfs/main.c: In function 'ecryptfs_parse_options':
fs/ecryptfs/main.c:363: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'

Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: update comment and debug statement
Michael Halcrow [Tue, 16 Oct 2007 08:27:58 +0000 (01:27 -0700)]
eCryptfs: update comment and debug statement

Trivial updates to comment and debug statement.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: fix Tag 11 writing code
Michael Halcrow [Tue, 16 Oct 2007 08:27:58 +0000 (01:27 -0700)]
eCryptfs: fix Tag 11 writing code

Fix up the Tag 11 writing code to handle size limits and boundaries more
explicitly.  It looks like the packet length was 1 shorter than it should have
been, chopping off the last byte of the key identifier.  This is largely
inconsequential, since it is not much more likely that a key identifier
collision will occur with 7 bytes rather than 8.  This patch fixes the packet
to use the full number of bytes that were originally intended to be used for
the key identifier.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: fix Tag 11 parsing code
Michael Halcrow [Tue, 16 Oct 2007 08:27:57 +0000 (01:27 -0700)]
eCryptfs: fix Tag 11 parsing code

Fix up the Tag 11 parsing code to handle size limits and boundaries more
explicitly.  Pay attention to *8* bytes for the key identifier (literal data),
no more, no less.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: fix Tag 3 parsing code
Michael Halcrow [Tue, 16 Oct 2007 08:27:56 +0000 (01:27 -0700)]
eCryptfs: fix Tag 3 parsing code

Fix up the Tag 3 parsing code to handle size limits and boundaries more
explicitly.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: fix Tag 1 parsing code
Michael Halcrow [Tue, 16 Oct 2007 08:27:56 +0000 (01:27 -0700)]
eCryptfs: fix Tag 1 parsing code

Fix up the Tag 1 parsing code to handle size limits and boundaries more
explicitly.  Initialize the new auth_tok's flags.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: kmem_cache objects for multiple keys; init/exit functions
Michael Halcrow [Tue, 16 Oct 2007 08:27:55 +0000 (01:27 -0700)]
eCryptfs: kmem_cache objects for multiple keys; init/exit functions

Introduce kmem_cache objects for handling multiple keys per inode.  Add calls
in the module init and exit code to call the key list
initialization/destruction functions.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: use list_for_each_entry_safe() when wiping auth toks
Michael Halcrow [Tue, 16 Oct 2007 08:27:55 +0000 (01:27 -0700)]
eCryptfs: use list_for_each_entry_safe() when wiping auth toks

Use list_for_each_entry_safe() when wiping the authentication token list.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoeCryptfs: add key list structure; search keyring
Michael Halcrow [Tue, 16 Oct 2007 08:27:53 +0000 (01:27 -0700)]
eCryptfs: add key list structure; search keyring

Add support structures for handling multiple keys.  The list in crypt_stat
contains the key identifiers for all of the keys that should be used for
encrypting each file's File Encryption Key (FEK).  For now, each inode
inherits this list from the mount-wide crypt_stat struct, via the
ecryptfs_copy_mount_wide_sigs_to_inode_sigs() function.

This patch also removes the global key tfm from the mount-wide crypt_stat
struct, instead keeping a list of tfm's meant for dealing with the various
inode FEK's.  eCryptfs will now search the user's keyring for FEK's parsed
from the existing file metadata, so the user can make keys available at any
time before or after mounting.

Now that multiple FEK packets can be written to the file metadata, we need to
be more meticulous about size limits.  The updates to the code for writing out
packets to the file metadata makes sizes and limits more explicit, uniformly
expressed, and (hopefully) easier to follow.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agofs/nfsd/export.c: make 3 functions static
Adrian Bunk [Tue, 16 Oct 2007 08:27:52 +0000 (01:27 -0700)]
fs/nfsd/export.c: make 3 functions static

This patch makes the following needlessly global functions static:
- exp_get_by_name()
- exp_parent()
- exp_find()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoisdn: guard against a potential NULL pointer dereference in old_capi_manufacturer()
Jesper Juhl [Tue, 16 Oct 2007 08:27:52 +0000 (01:27 -0700)]
isdn: guard against a potential NULL pointer dereference in old_capi_manufacturer()

In drivers/isdn/capi/kcapi.c::old_capi_manufacturer(), if the call to
get_capi_ctr_by_nr(ldef.contr); in line 823 returns NULL, then we'll be
dereferencing a NULL pointer in the very next line.

(Found by Coverity checker as bug #402)

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agofix possible NULL deref on low memory condition in capidrv.c::send_message()
Jesper Juhl [Tue, 16 Oct 2007 08:27:51 +0000 (01:27 -0700)]
fix possible NULL deref on low memory condition in capidrv.c::send_message()

If we fail to allocate an skb in
drivers/isdn/capi/capidrv.c::send_message(), then we'll end up
dereferencing a NULL pointer.
Since out of memory conditions are not unheard of, I believe it
is better to print a error message and just return rather than
bring down the whole kernel.
Sure, doing this may upset some application, but that's still
better than crashing the whole system.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agouse mutex instead of semaphore in isdn subsystem common functions
Matthias Kaehlcke [Tue, 16 Oct 2007 08:27:50 +0000 (01:27 -0700)]
use mutex instead of semaphore in isdn subsystem common functions

The ISDN subsystem common functions use a semaphore as mutex. Use the
mutex API instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agogigaset: remove pointless locking
Tilman Schmidt [Tue, 16 Oct 2007 08:27:50 +0000 (01:27 -0700)]
gigaset: remove pointless locking

Remove pointless taking of spinlock around reading a single pointer-sized
or smaller variable.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agokprobes: support kretprobe blacklist
Masami Hiramatsu [Tue, 16 Oct 2007 08:27:49 +0000 (01:27 -0700)]
kprobes: support kretprobe blacklist

Introduce architecture dependent kretprobe blacklists to prohibit users
from inserting return probes on the function in which kprobes can be
inserted but kretprobes can not.

This patch also removes "__kprobes" mark from "__switch_to" on x86_64 and
registers "__switch_to" to the blacklist on x86-64, because that mark is to
prohibit user from inserting only kretprobe.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agospi doesn't need class_device
Tony Jones [Tue, 16 Oct 2007 08:27:48 +0000 (01:27 -0700)]
spi doesn't need class_device

Make the SPI framework and drivers stop using class_device.  Update docs
accordingly ...  highlighting just which sysfs paths should be
"safe"/stable.

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agoDocumentation/spi/spidev_test.c: constify some variables
WANG Cong [Tue, 16 Oct 2007 08:27:47 +0000 (01:27 -0700)]
Documentation/spi/spidev_test.c: constify some variables

Constify two char pointers and a struct in Documentation/spi/spidev_test.c.

Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
17 years agospi_mpc83xx handles other processors with QUICC engine
Anton Vorontsov [Tue, 16 Oct 2007 08:27:47 +0000 (01:27 -0700)]
spi_mpc83xx handles other processors with QUICC engine

Currently, all QE SPI controllers are almost the same comparing to
MPC83xx's, thus let's use that driver for them.

Tested to work on MPC85xx in loopback mode.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>