staging: sm7xxfb: sm7xx becomes sm7xxfb

Rename sm7xx driver to sm7xxfb. Fix Kconfig and Makefile to fit the new
change.

Changes are coherent with the rest of stable framebuffer drivers. TODO
updated.

Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm7xx: update comments and clarify supported chips

This patch updates/adds comments in order to clarify devices and Lynx
families supported for this driver.

Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm7xx: code improvement

This patch simplifies code. It erases redundant code under little endian
compilations.

Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8187se, rtl8192e: fix '&' vs '|' bugs

The original code is equivalent to:

wrqu->retry.flags = 0x1000 & 0x0002;

so it just sets .flags to zero.  We should be ORing the values together
like r8192_wx_get_retry() does in drivers/staging/rtl8192u/r8192U_wx.c.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: Fix typo in rts5139

Correct spelling typo in rts5139/rts51x_chip.h, rts51x_scsi.h

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Fix typo in winbond

Correct spelling typo in winbond/mto.c and mds_s.h

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: Fix spinlock recursion on gdm_usb_send_complete

This patch fixes a spinlock recursion bug on several call sites of
gdm_usb_send_complete by not calling spin_lock_irqsave on
urb->context->tx_cxt->lock when the lock has already been acquired.

Signed-off-by: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Return -ENOMEM instead of -1 when memory not acquired in nmv.c

This patch changes the return statement on two
conditions where memory could not be acquired.
It returns -ENOMEM instead of -1.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Use udelay instead of msleep for delays in nvm.c

This patch uses udelay instead of msleep for delays
because msleep can sleep up to 20ms for any value
less than 20.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Fix ERROR: return is not a function, parentheses are not required.

This patch fixes the following error reported
by checkpatch.pl in nvm.c: "ERROR: return is
not a function, parentheses are not required".

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Correctly format all comments in nvm.c

This patch correctly formats all comments as reported
by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Properly format braces in nvm.c

This patch cuddles braces as reported
by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Fix all whitespace issues in nvm.c

This patch resolves all whitespace issues as reported
by checkpatch.pl.

Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlags49_h2: remove direct declarations of KERN_<LEVEL> prefixes

Use the standard KERN_<LEVEL> #defines instead of "<.>"

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/wlan-ng: prsim2fw.c coding style cleanup

this patch fixes the coding style problems found by using checkpatch.pl

drivers/staging/wlan-ng/prism2fw.c:175: ERROR: "foo * bar" should be "foo *bar"
drivers/staging/wlan-ng/prism2fw.c:210: WARNING: line over 80 characters
drivers/staging/wlan-ng/prism2fw.c:596: WARNING: line over 80 characters
drivers/staging/wlan-ng/prism2fw.c:658: ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/wlan-ng: cfg80211.c coding style cleanup

there are warnings that are reported by checkpatch.pl
fixed the following problems

drivers/staging/wlan-ng/cfg80211.c:130: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:366: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:543: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:665: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:692: WARNING: line over 80 characters
drivers/staging/wlan-ng/cfg80211.c:735: WARNING: line over 80 characters

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: "sbe-2t3e3" Fix typos in sbe-2t3e3

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/gdm72xx: Remove version.h includes

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rts5139: sd_cprm: fix coding style and deprecation issues

This commit fixes coding style and deprecation issues which
includes long lines, braces with single statments in if condition
and deprecated min() function.

Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: gdm72xx: gdm_usb: fix deprecated function kernel_thread

This commit fixes deprecated function kernel_thread by replacing
it with kthread_run.

Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ramster: r2net: fix coding style issues

This commit fixes coding style issues related to string splite
across multiple lines.

Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sep: fix coding style issues

This commit fixes coding style issues related to string split
across the lines and space before tab at start of line.

Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: cptm1217: clearpad_tm1217: fix coding style issues

This commit fixes coding style issues including quoted string
across multiple lines.

Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: Updated comment describing VHCI_NPORTS

Updated out-of-date comment describing VHCI_NPORT

Signed-off-by: Bart Westgeest <bart@elbrys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: disable pci device on pci remove function.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: disable pci device if there's an error after enabling it.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: reorder the code a bit to be more module friendly

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: xgifb: Remove #ifdef MODULE

Check for MODULE is not needed. In a static compilation the parameters
definition is valid and module_exit() does nothing.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: Replace NULLFUNC

The source code defines a macro NULLFUNC

  #define NULLFUNC 0

and uses it as a generic null function pointer constant.  This is
superfluous.  Just use NULL instead.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: Replace NULLFUNC

The source code defines a macro NULLFUNC

  #define NULLFUNC 0

and uses it as a generic null function pointer constant.  This is
superfluous.  Just use NULL instead.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: add a missing unlock

This side of the if else statement returned with the lock held and IRQs
disabled.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: serial2002: quiet NULL pointer sparse noise

Quiet a number of sparse warnings in this file:

warning: Using plain integer as NULL pointer

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: if test should use logical OR not bitwise OR

This quiets a couple sparse warnings about:

warning: dubious: !x | !y
warning: dubious: x | !y

Also, remove the unnecessary parentheses abound the variables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: if test should use logical AND not bitwise AND

This quiets a couple sparse warnings about:

warning: dubious: !x & y

Also, remove the unnecessary parentheses around the variables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: refactor comedi_fops to remove most of the forward declarations

Move the comedi_unlocked_ioctl function in order to remove most of
the forward declarations in this file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/me4000.c: adjust suspicious bit operation

TRIG_ROUND_NEAREST is 0, so a bit-and with it is always false.  The
value TRIG_ROUND_MASK covers the bits of the TRIG_ROUND constants, so
first pick those bits and then make the test using ==.

The same is done for TRIG_ROUND_UP for symmetry, even though bit-and would
be sufficient in this case.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: unlock spinlock on command error

When starting the acquisition the labpc_ai_cmd function was
exiting without unlocking the spinlock. This results in a
sparse warning:

warning: context imbalance in 'labpc_ai_cmd' - different lock contexts for basic block

Add the missing spin_unlock_irqrestore calls.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cleanup sysfs functions

Make the comedi sysfs functions a bit more concise by shortening
some of the verbose variable names and reusing some of the
variables that were used for intermediate calculations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: describe comedi_recognize()

Add a comment to comedi_recognize() to describe what it does as it's a
bit confusing.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: Reduce conditional compilation

This code is used by some combination of the CONFIG_COMEDI_DAS08_CS,
CONFIG_COMEDI_DAS08_ISA, and CONFIG_COMEDI_DAS08_PCI and contains a lot
of conditional compilation.

Remove most of the conditional compilation, relying on the compiler to
optimize out unused static functions and data.  Use the '__maybe_unused'
tag for those functions that cause compiler warnings as a result of
this.

Also change the DO_COMEDI_DRIVER_REGISTER macro from a conditionally
defined macro to a manifest constant macro to allow it to be tested
outside the preprocessor (although this is not currently needed).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Delete if_strip.h

Commit f80a3f62383bf673c310926d55142d51f118926d ("Staging: strip: delete
the driver") left if_strip.h unused: nothing in the tree includes it
anymore. It is still exported, but since nothing in the kernel uses
struct MetricomAddress, that seems pointless. Delete this header too.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: userspace: include headers in release tarballs

The header files should be included in generated tarballs for archives.

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: conventions, __aligned() attribute

Using the __aligned() attribute in favor of __attribute__((aligned(size)))

Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: conventions pr_warning -> pr_warn()

Porting zram to use the pr_warn() function instead of the deprecated
pr_warning().

Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc documentation

Documentation of various struct page fields
used by zsmalloc.

Changes for v2:
- Regroup descriptions as suggested by Konrad

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: remove special handle of uncompressed page

xvmalloc can't handle PAGE_SIZE page so that zram have to
handle it specially but zsmalloc can do it so let's remove
unnecessary special handling code.

Quote from Nitin
"I think page vs handle distinction was added since xvmalloc could not
handle full page allocation. Now that zsmalloc allows full page
allocation, we can just use it for both cases. This would also allow
removing the ZRAM_UNCOMPRESSED flag. The only downside will be slightly
slower code path for full page allocation but this event is anyways
supposed to be rare, so should be fine."

1. This patch reduces code very much.

 drivers/staging/zram/zram_drv.c   |  104 +++++--------------------------------
 drivers/staging/zram/zram_drv.h   |   17 +-----
 drivers/staging/zram/zram_sysfs.c |    6 +--
 3 files changed, 15 insertions(+), 112 deletions(-)

2. change pages_expand with bad_compress so it can count
   bad compression(above 75%) ratio.

3. remove zobj_header which is for back-reference for defragmentation
   because firstly, it's not used at the moment and zsmalloc can't handle
   bigger size than PAGE_SIZE so zram can't do it any more without redesign.

Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zram: fix random data read

fd1a30de makes a bug that it uses (struct page *) as zsmalloc's handle
although it's a uncompressed page so that it can access random page,
return random data or even crashed by get_first_page in zs_map_object.

Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: zsmalloc: zsmalloc: use unsigned long instead of void *

We should use unsigned long as handle instead of void * to avoid any
confusion. Without this, users may just treat zs_malloc return value as
a pointer and try to deference it.

This patch passed compile test(zram, zcache and ramster) and zram is
tested on qemu.

changelog
  * from v2
- remove hval pointed out by Nitin
- based on next-20120607
  * from v1
- change zcache's zv_create return value
- baesd on next-20120604

Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: et131x: fix | vs & typos

These two places seem like they should be using bitwise OR instead of
bitwise AND.  The first one is a noop which is equivalent to:

imr |= (0x0100 & 0x0004 & 0x0001);

The second is sets lcr2 to zero instead of just clearing the high bits.

lcr2 &= (0x00F0 & 0x000F);

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: et131x: fix coding style issues

This commit fixes coding style issues including braces
position and line wrapping.

Signed-off-by: Adnan Ali <adnan.ali@codethink.co.uk>
Reviewed-by: Jannis Pohlmann <jannis.pohlmann@codethink.co.uk>
Acked-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: omapdrm: Fix error paths during dmm init

Failures during the dmm probe can cause the kernel to crash.  Moved
the spinlock to a global and moved list initializations immediately
after the allocation of the dmm private structure.

Signed-off-by: Andy Gross <andy.gross@ti.com>
Reviewed-by: Rob Clark <rob.clark@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: change device table definition and export it.

Use DEFINE_PCI_DEVICE_TABLE() to create the device table and add
MODULE_DEVICE_TABLE() to export it.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: remove unused enum uart_parity_e.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: remove error_flag field from ipoctal struct.

Remove the error_flag field from the ipoctal structure, as the error code
is handled through the tty abstraction. Remove the values definition as well.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: remove ipoctal_config structure.

The configuration of the communication channel is handled by the tty
abstraction, so the ipoctal_config structure has become useless and it's
only used to store values that are never accesed. Remove it.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove gotos in tpci200_install()

Remove the gotos when handling error conditions, as the code gets clearer
and the gotos are not really avoiding code replication.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove "out" label in tpci200_request_irq()

Remove the "out" label from tpci200_request_irq(), as it can directly return
the error code instead of jumping.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove useless break in tpci200_slot_map_space()

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove "out" label in tpci200_slot_map_space()

Remove the "out" label from tpci200_slot_map_space(), as it can directly return
the error code instead of jumping.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove gotos in tpci200_free_irq().

Handle error conditions with simple returns instead of usig gotos.

Signed-off-by: Miguel Gómez <magomez@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:magnetometer:ak8975: remove 'mode' attribute

The raw data reading process (ak8975_read_axis) sets the
single measurement mode to take a sample and once the
conversion is completed the device enters into power-down
mode automatically, therefore there is no need to enable
a flag for this to happen.

Signed-off-by: Leed Aguilar <leed.aguilar@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:magnetometer:ak8975: use gpio_request_one api

Use gpio_request_one api, it looks cleaner.

Signed-off-by: Leed Aguilar <leed.aguilar@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:magnetometer:ak8975: set power-down mode after reading fuse ROM data

Fuse ROM data access mode is the only mode which does not
transition to power-down mode automatically.

As per the AK8975 data sheet, it is recomended to set the
power-down mode first before attempting to change into
another mode.

Signed-off-by: Leed Aguilar <leed.aguilar@ti.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: iio_enum_available_read: Prevent possible buffer overflow

Use scnprint instead of snprintf, because snprintf returns the number of bytes
that would have been written to the buffer if there was enough space, and as a
result writing to buf[len-1] might cause a access beyond the buffers limits.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adf4350: fix compiler warning [-Wuninitialized]

drivers/iio/frequency/adf4350.c:316:32: warning: ‘val’ may be used uninitialized in this function
[-Wuninitialized]

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: change pr_* usage for dev_* functions

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: change pr_* usage for dev_* functions

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: fix kernel oops when uninstalling a device

When uninstalling a device, the call to the ipack_bus_ops remove() frees
resources in the ipack device driver but without unregistering the device.

It generates a kernel oops when somebody wants to unregister the device.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: avoid dereference of a freed tpci200->info

tpci200->info is used later when uninstalling the module. As there is another
kfree in the proper place, this patch removes the wrong one.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/devices/ipoctal: avoid kernel oops when uninstalling

When uninstalling a device, there is a loop of calls that produces, at the end,
two calls to __ipoctal_remove() function with the same ipack_device argument.

The first time works fine, but the second will fail in tty_unregister_driver()

To avoid this situation, the call to __ipoctal_remove() it is done only from the
ipack bus driver and not from the ipack device driver.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: delete the call to remove() in ipack_driver_register

When a bus driver calls ipack_driver_register(), it should manages the returning
NULL value to undo all the operations it did before this call, and print the
corresponding trace.

It is not a task for the ipack driver to call the remove() function here.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: use idr interface for numbering buses

Use idr interface to give the bus number. That way, we remove the
limitation of 64 buses.

The mutex is removed because the ida interface uses spinlocks inside, so it is
not needed an extra lock.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: removed check of tpci200->slots[dev->slot].dev

When ipack_device_register() is called, the variable
tpci200->slots[dev->slot].dev has not assigned a value and it gives an error
when the mezzanine driver is reading a register from the board for the match()
function, as all the I/O functions call check_slot().

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: remove name field from slot_irq

This field is not needed at all, as the IRQ is registered for the carrier not
for the mezzanine.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: fix indention.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: check if the remove function is available

To avoid a dereference of a NULL pointer, the availability of the function is
checked before its use.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: tpci200_slot_map_space() should return 0 if succeed.

tpci200_slot_map_space() should return 0 if the operation was properly
done. If not, the caller will think that something wrong happened.

This patch establish the returned value to 0. It is overwritten in case of
error.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: tpci200_slot_unmap_space() should return 0 if succeed.

tpci200_slot_unmap_space() should return 0 if the operation was properly done. If
not, the caller will think that something wrong happened.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: return proper value in match() function

It should return the same value given by the match function of the ipack_driver
that has been called.

Returning 0 here, means that the match has failed and it could be succeed.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack/bridges/tpci200: delete sysfs files

To perform the installation of a mezzanine it was needed to write on these
files, now it is not needed at all as the device model is properly implemented.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ipack: Remove version.h header file inclusion

version.h header file is no longer required.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: ak8975: Make it behave better as modules

The memory regions of the probe and remove are move
to __devinit and __devexit respectively.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: hmc5843: Make it behave better as modules

The memory regions of the probe and remove are move
to __devinit and __devexit respectively.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio: Move DAC drivers out of staging

The IIO DAC drivers are in a reasonably good shape. They all make use of channel
spec and non of them provides non-documented sysfs attributes. Code style should
be OK as well, both checkpatch and coccicheck only report trivial issues.

So lets move the whole folder out of staging.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5791: Move private structs and defines from header to C file

The header for this driver contains some private structs and defines, which do
not have to be shared between multiple source files, as well as the platform
data struct for this driver, which has to be shared with other source files.
Since there is no need to expose those private structs and defines move them to
the source file.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5504: Move private structs and defines from header to C file

The header for this driver contains some private structs and defines, which do
not have to be shared between multiple source files, as well as the platform
data struct for this driver, which has to be shared with other source files.
Since there is no need to expose those private structs and defines move them to
the source file.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5504: Check if IRQ was requested before freeing it

IRQ support is optional, so we have to check whether it was actually requested
before we attempt to free it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5791: Use strtobool for boolean values

Use strtobool for parsing the powerdown value instead of strict_strtol, since
the powerdown attribute is a boolean value.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5624r: Use strtobool for boolean values

Use strtobool for parsing the powerdown value instead of strict_strtol, since
the powerdown attribute is a boolean value.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5504: Use strtobool for boolean values

Use strtobool for parsing the powerdown value instead of strict_strtol, since
the powerdown attribute is a boolean value.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac: Remove dac.h

Now that all drivers have been converted to channel spec, we can finally remove
the dac.h file since it is no longer used.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:max517: Convert to channel spec

Convert the max517 driver to channel spec. As part of the conversion the
"out_voltage_1&2_raw" property, which updates both channel 1 and 2
simultaneously with the same value, is lost, since this is not really covered by
the IIO spec and has only a limited use case in practice.

Also the channel index for the sysfs files is now zero based instead of one
based, which means all channel numbers will be lower by one. E.g.
"out_voltage_1_scale" instead of "out_voltage_2_scale"

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac: Remove unused dac.h includes

None of these drivers use anything from dac.h, so remove the include.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5791: Convert to extended channel attributes

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5686: Convert to extended channel attributes

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5624r: Convert to extended channel attributes

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5504: Convert to extended channel attributes

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5380: Convert to extended channel attributes

Use extended channel attributes instead of raw sysfs files for the additional
channel attributes. This allows us to remove some boilerplate code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5446: Use iio_enum for powerdown modes

This allows us to remove some boilerplate code for comparing and formatting the
enum strings.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:iio:dac:ad5064: Use iio_enum for powerdown modes

This allows us to remove some boilerplate code for comparing and formatting the
enum strings.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>