git.stricted.de - GitHub/LineageOS/android_kernel_motorola

Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
"26 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
  userfaultfd: remove wrong comment from userfaultfd_ctx_get()
  fat: fix using uninitialized fields of fat_inode/fsinfo_inode
  sh: cayman: IDE support fix
  kasan: fix races in quarantine_remove_cache()
  kasan: resched in quarantine_remove_cache()
  mm: do not call mem_cgroup_free() from within mem_cgroup_alloc()
  thp: fix another corner case of munlock() vs. THPs
  rmap: fix NULL-pointer dereference on THP munlocking
  mm/memblock.c: fix memblock_next_valid_pfn()
  userfaultfd: selftest: vm: allow to build in vm/ directory
  userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED
  userfaultfd: non-cooperative: fix fork fctx->new memleak
  mm/cgroup: avoid panic when init with low memory
  drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h
  mm/vmstats: add thp_split_pud event for clarity
  include/linux/fs.h: fix unsigned enum warning with gcc-4.2
  userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete
  userfaultfd: non-cooperative: robustness check
  userfaultfd: non-cooperative: rollback userfaultfd_exit
  x86, mm: unify exit paths in gup_pte_range()
  ...

Merge tag 'xfs-4.11-fixes-1' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"Here are some bug fixes for -rc2 to clean up the copy on write
  handling and to remove a cause of hangs.

   - Fix various iomap bugs

   - Fix overly aggressive CoW preallocation garbage collection

   - Fixes to CoW endio error handling

   - Fix some incorrect geometry calculations

   - Remove a potential system hang in bulkstat

   - Try to allocate blocks more aggressively to reduce ENOSPC errors"

* tag 'xfs-4.11-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: try any AG when allocating the first btree block when reflinking
  xfs: use iomap new flag for newly allocated delalloc blocks
  xfs: remove kmem_zalloc_greedy
  xfs: Use xfs_icluster_size_fsb() to calculate inode alignment mask
  xfs: fix and streamline error handling in xfs_end_io
  xfs: only reclaim unwritten COW extents periodically
  iomap: invalidate page caches should be after iomap_dio_complete() in direct write

Merge tag 'gcc-plugins-v4.11-rc2' of git://git./linux/kernel/git/kees/linux

Pull gcc-plugins fix from Kees Cook:
"Fixes a typo in sancov plugin, exposed in earlier compiler versions"

* tag 'gcc-plugins-v4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: fix sancov_plugin for gcc-5

userfaultfd: remove wrong comment from userfaultfd_ctx_get()

It's a void function, so there is no return value;

Link: http://lkml.kernel.org/r/20170309150817.7510-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fat: fix using uninitialized fields of fat_inode/fsinfo_inode

Recently fallocate patch was merged and it uses
MSDOS_I(inode)->mmu_private at fat_evict_inode(). However,
fat_inode/fsinfo_inode that was introduced in past didn't initialize
MSDOS_I(inode) properly.

With those combinations, it became the cause of accessing random entry
in FAT area.

Link: http://lkml.kernel.org/r/87pohrj4i8.fsf@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: Moreno Bartalucci <moreno.bartalucci@tecnorama.it>
Tested-by: Moreno Bartalucci <moreno.bartalucci@tecnorama.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sh: cayman: IDE support fix

Remove incorrect CONFIG_IDE ifdef (CONFIG_IDE config option is for
internal drivers/ide/ use) and make IDE hardware interface always
initialized (not only when IDE subsystem is built-in).

This patch allows Cayman board to work with modular IDE subsystem
support and removes the requirement of having the whole core IDE
subsystem built-in when using libata PATA support.

Link: http://lkml.kernel.org/r/1990884.yFoE6lSB9G@amdc3058
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: fix races in quarantine_remove_cache()

quarantine_remove_cache() frees all pending objects that belong to the
cache, before we destroy the cache itself.  However there are currently
two possibilities how it can fail to do so.

First, another thread can hold some of the objects from the cache in
temp list in quarantine_put().  quarantine_put() has a windows of
enabled interrupts, and on_each_cpu() in quarantine_remove_cache() can
finish right in that window.  These objects will be later freed into the
destroyed cache.

Then, quarantine_reduce() has the same problem.  It grabs a batch of
objects from the global quarantine, then unlocks quarantine_lock and
then frees the batch.  quarantine_remove_cache() can finish while some
objects from the cache are still in the local to_free list in
quarantine_reduce().

Fix the race with quarantine_put() by disabling interrupts for the whole
duration of quarantine_put().  In combination with on_each_cpu() in
quarantine_remove_cache() it ensures that quarantine_remove_cache()
either sees the objects in the per-cpu list or in the global list.

Fix the race with quarantine_reduce() by protecting quarantine_reduce()
with srcu critical section and then doing synchronize_srcu() at the end
of quarantine_remove_cache().

I've done some assessment of how good synchronize_srcu() works in this
case.  And on a 4 CPU VM I see that it blocks waiting for pending read
critical sections in about 2-3% of cases.  Which looks good to me.

I suspect that these races are the root cause of some GPFs that I
episodically hit.  Previously I did not have any explanation for them.

  BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8
  IP: qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155
  PGD 6aeea067
  PUD 60ed7067
  PMD 0
  Oops: 0000 [#1] SMP KASAN
  Dumping ftrace buffer:
     (ftrace buffer empty)
  Modules linked in:
  CPU: 0 PID: 13667 Comm: syz-executor2 Not tainted 4.10.0+ #60
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  task: ffff88005f948040 task.stack: ffff880069818000
  RIP: 0010:qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155
  RSP: 0018:ffff88006981f298 EFLAGS: 00010246
  RAX: ffffea0000ffff00 RBX: 0000000000000000 RCX: ffffea0000ffff1f
  RDX: 0000000000000000 RSI: ffff88003fffc3e0 RDI: 0000000000000000
  RBP: ffff88006981f2c0 R08: ffff88002fed7bd8 R09: 00000001001f000d
  R10: 00000000001f000d R11: ffff88006981f000 R12: ffff88003fffc3e0
  R13: ffff88006981f2d0 R14: ffffffff81877fae R15: 0000000080000000
  FS:  00007fb911a2d700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000000000c8 CR3: 0000000060ed6000 CR4: 00000000000006f0
  Call Trace:
   quarantine_reduce+0x10e/0x120 mm/kasan/quarantine.c:239
   kasan_kmalloc+0xca/0xe0 mm/kasan/kasan.c:590
   kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544
   slab_post_alloc_hook mm/slab.h:456 [inline]
   slab_alloc_node mm/slub.c:2718 [inline]
   kmem_cache_alloc_node+0x1d3/0x280 mm/slub.c:2754
   __alloc_skb+0x10f/0x770 net/core/skbuff.c:219
   alloc_skb include/linux/skbuff.h:932 [inline]
   _sctp_make_chunk+0x3b/0x260 net/sctp/sm_make_chunk.c:1388
   sctp_make_data net/sctp/sm_make_chunk.c:1420 [inline]
   sctp_make_datafrag_empty+0x208/0x360 net/sctp/sm_make_chunk.c:746
   sctp_datamsg_from_user+0x7e8/0x11d0 net/sctp/chunk.c:266
   sctp_sendmsg+0x2611/0x3970 net/sctp/socket.c:1962
   inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761
   sock_sendmsg_nosec net/socket.c:633 [inline]
   sock_sendmsg+0xca/0x110 net/socket.c:643
   SYSC_sendto+0x660/0x810 net/socket.c:1685
   SyS_sendto+0x40/0x50 net/socket.c:1653

I am not sure about backporting.  The bug is quite hard to trigger, I've
seen it few times during our massive continuous testing (however, it
could be cause of some other episodic stray crashes as it leads to
memory corruption...).  If it is triggered, the consequences are very
bad -- almost definite bad memory corruption.  The fix is non trivial
and has chances of introducing new bugs.  I am also not sure how
actively people use KASAN on older releases.

[dvyukov@google.com: - sorted includes[
Link: http://lkml.kernel.org/r/20170309094028.51088-1-dvyukov@google.com
Link: http://lkml.kernel.org/r/20170308151532.5070-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: resched in quarantine_remove_cache()

We see reported stalls/lockups in quarantine_remove_cache() on machines
with large amounts of RAM.  quarantine_remove_cache() needs to scan
whole quarantine in order to take out all objects belonging to the
cache.  Quarantine is currently 1/32-th of RAM, e.g.  on a machine with
256GB of memory that will be 8GB.  Moreover quarantine scanning is a
walk over uncached linked list, which is slow.

Add cond_resched() after scanning of each non-empty batch of objects.
Batches are specifically kept of reasonable size for quarantine_put().
On a machine with 256GB of RAM we should have ~512 non-empty batches,
each with 16MB of objects.

Link: http://lkml.kernel.org/r/20170308154239.25440-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: do not call mem_cgroup_free() from within mem_cgroup_alloc()

mem_cgroup_free() indirectly calls wb_domain_exit() which is not
prepared to deal with a struct wb_domain object that hasn't executed
wb_domain_init().  For instance, the following warning message is
printed by lockdep if alloc_percpu() fails in mem_cgroup_alloc():

  INFO: trying to register non-static key.
  the code is fine but needs lockdep annotation.
  turning off the locking correctness validator.
  CPU: 1 PID: 1950 Comm: mkdir Not tainted 4.10.0+ #151
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
   dump_stack+0x67/0x99
   register_lock_class+0x36d/0x540
   __lock_acquire+0x7f/0x1a30
   lock_acquire+0xcc/0x200
   del_timer_sync+0x3c/0xc0
   wb_domain_exit+0x14/0x20
   mem_cgroup_free+0x14/0x40
   mem_cgroup_css_alloc+0x3f9/0x620
   cgroup_apply_control_enable+0x190/0x390
   cgroup_mkdir+0x290/0x3d0
   kernfs_iop_mkdir+0x58/0x80
   vfs_mkdir+0x10e/0x1a0
   SyS_mkdirat+0xa8/0xd0
   SyS_mkdir+0x14/0x20
   entry_SYSCALL_64_fastpath+0x18/0xad

Add __mem_cgroup_free() which skips wb_domain_exit().  This is used by
both mem_cgroup_free() and mem_cgroup_alloc() clean up.

Fixes: 0b8f73e104285 ("mm: memcontrol: clean up alloc, online, offline, free functions")
Link: http://lkml.kernel.org/r/20170306192122.24262-1-tahsin@google.com
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: fix another corner case of munlock() vs. THPs

The following test case triggers BUG() in munlock_vma_pages_range():

int main(int argc, char *argv[])
{
int fd;

system("mount -t tmpfs -o huge=always none /mnt");
fd = open("/mnt/test", O_CREAT | O_RDWR);
ftruncate(fd, 4UL << 20);
mmap(NULL, 4UL << 20, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_FIXED | MAP_LOCKED, fd, 0);
mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_LOCKED, fd, 0);
munlockall();
return 0;
}

The second mmap() create PTE-mapping of the first huge page in file.  It
makes kernel munlock the page as we never keep PTE-mapped page mlocked.

On munlockall() when we handle vma created by the first mmap(),
munlock_vma_page() returns page_mask == 0, as the page is not mlocked
anymore.  On next iteration follow_page_mask() return tail page, but
page_mask is HPAGE_NR_PAGES - 1.  It makes us skip to the first tail
page of the next huge page and step on
VM_BUG_ON_PAGE(PageMlocked(page)).

The fix is not use the page_mask from follow_page_mask() at all.  It has
no use for us.

Link: http://lkml.kernel.org/r/20170302150252.34120-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rmap: fix NULL-pointer dereference on THP munlocking

The following test case triggers NULL-pointer derefernce in
try_to_unmap_one():

#include <fcntl.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>

int main(int argc, char *argv[])
{
int fd;

system("mount -t tmpfs -o huge=always none /mnt");
fd = open("/mnt/test", O_CREAT | O_RDWR);
ftruncate(fd, 2UL << 20);
mmap(NULL, 2UL << 20, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_FIXED | MAP_LOCKED, fd, 0);
mmap(NULL, 2UL << 20, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_LOCKED, fd, 0);
munlockall();
return 0;
}

Apparently, there's a case when we call try_to_unmap() on huge PMDs:
it's TTU_MUNLOCK.

Let's handle this case correctly.

Fixes: c7ab0d2fdc84 ("mm: convert try_to_unmap_one() to use page_vma_mapped_walk()")
Link: http://lkml.kernel.org/r/20170302151159.30592-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memblock.c: fix memblock_next_valid_pfn()

Obviously, we should not access memblock.memory.regions[right] if
'right' is outside of [0..memblock.memory.cnt>.

Fixes: b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible")
Link: http://lkml.kernel.org/r/20170303023745.9104-1-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: selftest: vm: allow to build in vm/ directory

linux/tools/testing/selftests/vm $ make

  gcc -Wall -I ../../../../usr/include     compaction_test.c -lrt -o /compaction_test
  /usr/lib/gcc/x86_64-pc-linux-gnu/4.9.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot open output file /compaction_test: Permission denied
  collect2: error: ld returned 1 exit status
  make: *** [../lib.mk:54: /compaction_test] Error 1

Since commit a8ba798bc8ec ("selftests: enable O and KBUILD_OUTPUT")
selftests/vm build fails if run from the "selftests/vm" directory, but
it works in the selftests/ directory.  It's quicker to be able to do a
local vm-only build after a tree wipe and this patch allows for it
again.

Link: http://lkml.kernel.org/r/20170302173738.18994-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED

userfaultfd_remove() has to be execute before zapping the pagetables or
UFFDIO_COPY could keep filling pages after zap_page_range returned,
which would result in non zero data after a MADV_DONTNEED.

However userfaultfd_remove() may have to release the mmap_sem. This was
handled correctly in MADV_REMOVE, but MADV_DONTNEED accessed a
potentially stale vma (the very vma passed to zap_page_range(vma, ...)).

The fix consists in revalidating the vma in case userfaultfd_remove()
had to release the mmap_sem.

This also optimizes away an unnecessary down_read/up_read in the
MADV_REMOVE case if UFFD_EVENT_FORK had to be delivered.

It all remains zero runtime cost in case CONFIG_USERFAULTFD=n as
userfaultfd_remove() will be defined as "true" at build time.

Link: http://lkml.kernel.org/r/20170302173738.18994-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: non-cooperative: fix fork fctx->new memleak

We have a memleak in the ->new ctx if the uffd of the parent is closed
before the fork event is read, nothing frees the new context.

Link: http://lkml.kernel.org/r/20170302173738.18994-2-aarcange@redhat.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/cgroup: avoid panic when init with low memory

The system may panic when initialisation is done when almost all the
memory is assigned to the huge pages using the kernel command line
parameter hugepage=xxxx.  Panic may occur like this:

  Unable to handle kernel paging request for data at address 0x00000000
  Faulting instruction address: 0xc000000000302b88
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048 [    0.082424] NUMA
  pSeries
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-15-generic #16-Ubuntu
  task: c00000021ed01600 task.stack: c00000010d108000
  NIP: c000000000302b88 LR: c000000000270e04 CTR: c00000000016cfd0
  REGS: c00000010d10b2c0 TRAP: 0300   Not tainted (4.9.0-15-generic)
  MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>[ 0.082770]   CR: 28424422  XER: 00000000
  CFAR: c0000000003d28b8 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1
  GPR00: c000000000270e04 c00000010d10b540 c00000000141a300 c00000010fff6300
  GPR04: 0000000000000000 00000000026012c0 c00000010d10b630 0000000487ab0000
  GPR08: 000000010ee90000 c000000001454fd8 0000000000000000 0000000000000000
  GPR12: 0000000000004400 c00000000fb80000 00000000026012c0 00000000026012c0
  GPR16: 00000000026012c0 0000000000000000 0000000000000000 0000000000000002
  GPR20: 000000000000000c 0000000000000000 0000000000000000 00000000024200c0
  GPR24: c0000000016eef48 0000000000000000 c00000010fff7d00 00000000026012c0
  GPR28: 0000000000000000 c00000010fff7d00 c00000010fff6300 c00000010d10b6d0
  NIP mem_cgroup_soft_limit_reclaim+0xf8/0x4f0
  LR do_try_to_free_pages+0x1b4/0x450
  Call Trace:
    do_try_to_free_pages+0x1b4/0x450
    try_to_free_pages+0xf8/0x270
    __alloc_pages_nodemask+0x7a8/0xff0
    new_slab+0x104/0x8e0
    ___slab_alloc+0x620/0x700
    __slab_alloc+0x34/0x60
    kmem_cache_alloc_node_trace+0xdc/0x310
    mem_cgroup_init+0x158/0x1c8
    do_one_initcall+0x68/0x1d0
    kernel_init_freeable+0x278/0x360
    kernel_init+0x24/0x170
    ret_from_kernel_thread+0x5c/0x74
  Instruction dump:
  eb81ffe0 eba1ffe8 ebc1fff0 ebe1fff8 4e800020 3d230001 e9499a42 3d220004
  3929acd8 794a1f24 7d295214 eac90100 <e9360000> 2fa90000 419eff74 3b200000
  ---[ end trace 342f5208b00d01b6 ]---

This is a chicken and egg issue where the kernel try to get free memory
when allocating per node data in mem_cgroup_init(), but in that path
mem_cgroup_soft_limit_reclaim() is called which assumes that these data
are allocated.

As mem_cgroup_soft_limit_reclaim() is best effort, it should return when
these data are not yet allocated.

This patch also fixes potential null pointer access in
mem_cgroup_remove_from_trees() and mem_cgroup_update_tree().

Link: http://lkml.kernel.org/r/1487856999-16581-2-git-send-email-ldufour@linux.vnet.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h

Link: http://lkml.kernel.org/r/20170226060230.11555-1-standby24x7@gmail.com
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Coly Li <colyli@suse.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmstats: add thp_split_pud event for clarity

We added support for PUD-sized transparent hugepages, however we count
the event "thp split pud" into thp_split_pmd event.

To separate the event count of thp split pud from pmd, add a new event
named thp_split_pud.

Link: http://lkml.kernel.org/r/1488282380-5076-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/fs.h: fix unsigned enum warning with gcc-4.2

With arm-linux-gcc-4.2, almost every file we build in the kernel ends up
with this warning:

include/linux/fs.h:2648: warning: comparison of unsigned expression < 0 is always false

Later versions don't have this problem, but it's easy enough to work
around.

Link: http://lkml.kernel.org/r/20161216105634.235457-12-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete

Don't stop running dup_fctx() even if userfaultfd_event_wait_completion
fails as it has to run userfaultfd_ctx_put on all ctx to pair against
the userfaultfd_ctx_get that was run on all fctx->orig in
dup_userfaultfd.

Link: http://lkml.kernel.org/r/20170224181957.19736-4-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: non-cooperative: robustness check

Similar to the handle_userfault() case, also make sure to never attempt
to send any event past the PF_EXITING point of no return.

This is purely a robustness check.

Link: http://lkml.kernel.org/r/20170224181957.19736-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: non-cooperative: rollback userfaultfd_exit

Patch series "userfaultfd non-cooperative further update for 4.11 merge
window".

Unfortunately I noticed one relevant bug in userfaultfd_exit while doing
more testing.  I've been doing testing before and this was also tested
by kbuild bot and exercised by the selftest, but this bug never
reproduced before.

I dropped userfaultfd_exit as result.  I dropped it because of
implementation difficulty in receiving signals in __mmput and because I
think -ENOSPC as result from the background UFFDIO_COPY should be enough
already.

Before I decided to remove userfaultfd_exit, I noticed userfaultfd_exit
wasn't exercised by the selftest and when I tried to exercise it, after
moving it to a more correct place in __mmput where it would make more
sense and where the vma list is stable, it resulted in the
event_wait_completion in D state.  So then I added the second patch to
be sure even if we call userfaultfd_event_wait_completion too late
during task exit(), we won't risk to generate tasks in D state.  The
same check exists in handle_userfault() for the same reason, except it
makes a difference there, while here is just a robustness check and it's
run under WARN_ON_ONCE.

While looking at the userfaultfd_event_wait_completion() function I
looked back at its callers too while at it and I think it's not ok to
stop executing dup_fctx on the fcs list because we relay on
userfaultfd_event_wait_completion to execute
userfaultfd_ctx_put(fctx->orig) which is paired against
userfaultfd_ctx_get(fctx->orig) in dup_userfault just before
list_add(fcs).  This change only takes care of fctx->orig but this area
also needs further review looking for similar problems in fctx->new.

The only patch that is urgent is the first because it's an use after
free during a SMP race condition that affects all processes if
CONFIG_USERFAULTFD=y.  Very hard to reproduce though and probably
impossible without SLUB poisoning enabled.

This patch (of 3):

I once reproduced this oops with the userfaultfd selftest, it's not
easily reproducible and it requires SLUB poisoning to reproduce.

    general protection fault: 0000 [#1] SMP
    Modules linked in:
    CPU: 2 PID: 18421 Comm: userfaultfd Tainted: G               ------------ T 3.10.0+ #15
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
    task: ffff8801f83b9440 ti: ffff8801f833c000 task.ti: ffff8801f833c000
    RIP: 0010:[<ffffffff81451299>]  [<ffffffff81451299>] userfaultfd_exit+0x29/0xa0
    RSP: 0018:ffff8801f833fe80  EFLAGS: 00010202
    RAX: ffff8801f833ffd8 RBX: 6b6b6b6b6b6b6b6b RCX: ffff8801f83b9440
    RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800baf18600
    RBP: ffff8801f833fee8 R08: 0000000000000000 R09: 0000000000000001
    R10: 0000000000000000 R11: ffffffff8127ceb3 R12: 0000000000000000
    R13: ffff8800baf186b0 R14: ffff8801f83b99f8 R15: 00007faed746c700
    FS:  0000000000000000(0000) GS:ffff88023fc80000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 00007faf0966f028 CR3: 0000000001bc6000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Call Trace:
      do_exit+0x297/0xd10
      SyS_exit+0x17/0x20
      tracesys+0xdd/0xe2
    Code: 00 00 66 66 66 66 90 55 48 89 e5 41 54 53 48 83 ec 58 48 8b 1f 48 85 db 75 11 eb 73 66 0f 1f 44 00 00 48 8b 5b 10 48 85 db 74 64 <4c> 8b a3 b8 00 00 00 4d 85 e4 74 eb 41 f6 84 24 2c 01 00 00 80
    RIP  [<ffffffff81451299>] userfaultfd_exit+0x29/0xa0
     RSP <ffff8801f833fe80>
    ---[ end trace 9fecd6dcb442846a ]---

In the debugger I located the "mm" pointer in the stack and walking
mm->mmap->vm_next through the end shows the vma->vm_next list is fully
consistent and it is null terminated list as expected.  So this has to
be an SMP race condition where userfaultfd_exit was running while the
vma list was being modified by another CPU.

When userfaultfd_exit() run one of the ->vm_next pointers pointed to
SLAB_POISON (RBX is the vma pointer and is 0x6b6b..).

The reason is that it's not running in __mmput but while there are still
other threads running and it's not holding the mmap_sem (it can't as it
has to wait the even to be received by the manager).  So this is an use
after free that was happening for all processes.

One more implementation problem aside from the race condition:
userfaultfd_exit has really to check a flag in mm->flags before walking
the vma or it's going to slowdown the exit() path for regular tasks.

One more implementation problem: at that point signals can't be
delivered so it would also create a task in D state if the manager
doesn't read the event.

The major design issue: it overall looks superfluous as the manager can
check for -ENOSPC in the background transfer:

if (mmget_not_zero(ctx->mm)) {
[..]
} else {
return -ENOSPC;
}

It's safer to roll it back and re-introduce it later if at all.

[rppt@linux.vnet.ibm.com: documentation fixup after removal of UFFD_EVENT_EXIT]
Link: http://lkml.kernel.org/r/1488345437-4364-1-git-send-email-rppt@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/20170224181957.19736-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86, mm: unify exit paths in gup_pte_range()

All exit paths from gup_pte_range() require pte_unmap() of the original
pte page before returning. Refactor the code to have a single exit
point to do the unmap.

This mirrors the flow of the generic gup_pte_range() in mm/gup.c.

Link: http://lkml.kernel.org/r/148804251828.36605.14910389618497006945.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86, mm: fix gup_pte_range() vs DAX mappings

gup_pte_range() fails to check pte_allows_gup() before translating a DAX
pte entry, pte_devmap(), to a page. This allows writes to read-only
mappings, and bypasses the DAX cacheline dirty tracking due to missed
'mkwrite' faults. The gup_huge_pmd() path and the gup_huge_pud() path
correctly check pte_allows_gup() before checking for _devmap() entries.

Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings")
Link: http://lkml.kernel.org/r/148804251312.36605.12665024794196605053.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Xiong Zhou <xzhou@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

power/mm: update pte_write and pte_wrprotect to handle savedwrite

We use pte_write() to check whethwer the pte entry is writable.  This is
mostly used to later mark the pte read only if it is writable.  The other
use of pte_write() is to check whether the pte_entry is writable so that
hardware page table entry can be marked accordingly.  This is used in kvm
where we look at qemu page table entry and update hardware hash page table
for the guest with correct write enable bit.

With the above, for the first usage we should also check the savedwrite
bit so that we can correctly clear the savedwite bit.  For the later, we
add a new variant __pte_write().

With this we can revert write_protect_page part of 595cd8f256d2 ("mm/ksm:
handle protnone saved writes when making page write protect").  But I left
it as it is as an example code for savedwrite check.

Fixes: c137a2757b886 ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write")
Link: http://lkml.kernel.org/r/1488203787-17849-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc/mm: handle protnone ptes on fork

We need to mark pages of parent process read only on fork.  Numa fault
pte needs a protnone ptes variant with saved write flag set.  On fork we
need to make sure we remove the saved write bit.  Instead of adding the
protnone check in the caller update ptep_set_wrprotect variants to clear
savedwrite bit.

Without this we see random segfaults in application on fork.

Fixes: c137a2757b886 ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write")
Link: http://lkml.kernel.org/r/1488203787-17849-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/spelling.txt: add "overide" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

overide||override

While we are here, fix the doubled "address" in the touched line
Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt.

Also, fix the comment block style in the touched hunks in
drivers/media/dvb-frontends/drx39xyj/drx_driver.h.

Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/spelling.txt: add "disble(d)" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

  disble||disable
  disbled||disabled

I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched.  The macro is not referenced at all, but this commit is
touching only comment blocks just in case.

Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGE

__do_fault assumes vmf->page has been initialized and is valid if
VM_FAULT_NOPAGE is not returned by vma->vm_ops->fault(vma, vmf).

handle_userfault() in turn should return VM_FAULT_NOPAGE if it doesn't
return VM_FAULT_SIGBUS or VM_FAULT_RETRY (the other two possibilities).

This VM_FAULT_NOPAGE case is only invoked when signal are pending and it
didn't matter for anonymous memory before. It only started to matter
since shmem was introduced. hugetlbfs also takes a different path and
doesn't exercise __do_fault.

Link: http://lkml.kernel.org/r/20170228154201.GH5816@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'pm-4.11-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix several issues in the intel_pstate driver and one issue in
  the schedutil cpufreq governor, clean up that governor a bit and hook
  up existing code for disabling cpufreq to a new kernel command line
  option.

  Specifics:

   - Three fixes for intel_pstate problems related to the passive mode
     (in which it acts as a regular cpufreq scaling driver), two for the
     handling of global P-state limits and one for the handling of the
     cpu_frequency tracepoint in that mode (Rafael Wysocki).

   - Three fixes for the handling of P-state limits in intel_pstate in
     the active mode (Rafael Wysocki).

   - Introduction of a new cpufreq.off=1 kernel command line argument
     that will disable cpufreq entirely if passed to the kernel and is
     simply hooked up to the existing code used by Xen (Len Brown).

   - Fix for the schedutil cpufreq governor to prevent it from using
     stale raw frequency values in configurations with mutiple CPUs
     sharing one policy object and a cleanup for it reducing its
     overhead slightly (Viresh Kumar)"

* tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy
  cpufreq: intel_pstate: Fix intel_pstate_verify_policy()
  cpufreq: intel_pstate: Fix global settings in active mode
  cpufreq: Add the "cpufreq.off=1" cmdline option
  cpufreq: schedutil: Pass sg_policy to get_next_freq()
  cpufreq: schedutil: move cached_raw_freq to struct sugov_policy
  cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily
  cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy()
  cpufreq: intel_pstate: Do not use performance_limits in passive mode

Merge tag 'pci-v4.11-fixes-2' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
"PCI fixes:

   - fix NULL pointer dereference in Exynos driver

   - fix NULL pointer dereference in ASPM with pre-1.1 PCIe devices

   - blacklist QLogic ISP2722 to prevent panics while reading VPD"

* tag 'pci-v4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/ASPM: Always set link->downstream to avoid NULL dereference on remove
  PCI: Prevent VPD access for QLogic ISP2722
  PCI: exynos: Initialize elbi_base even when using PHY framework

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Sending this a bit sooner than I otherwise would have, as a fix in the
  merge window had some unfortunate issues and side effects for some
  folks.

  This contains:

   - Fixes from Jan for the bdi registration/unregistration. These have
     been tested by the various parties reporting issues, and should be
     solid at this point.

   - Also from Jan, fix for axonram gendisk registration.

   - A stable fix for zram from Johannes.

   - A small series from Ming, fixing up some long standing issues with
     blk-mq hardware queue kobject initialization and registration.

   - A fix for sed opal from Jon, fixing a nonsensical range check and
     some set-but-not-used variables.

   - A fix from Neil for a long standing deadlock issue for stacking
     device drivers. With this in place, dm/md don't have to work around
     the issue anymore, and can be properly fixed up"

* 'for-linus' of git://git.kernel.dk/linux-block:
  axonram: Fix gendisk handling
  blk: improve order of bio handling in generic_make_request()
  Revert "scsi, block: fix duplicate bdi name registration crashes"
  block: Make del_gendisk() safer for disks without queues
  bdi: Fix use-after-free in wb_congested_put()
  block: Allow bdi re-registration
  block/sed: Fix opal user range check and unused variables
  zram: set physical queue limits to avoid array out of bounds accesses
  blk-mq: free hctx->cpumask in release handler of hctx's kobject
  blk-mq: make lifetime consistent between hctx and its kobject
  blk-mq: make lifetime consitent between q/ctx and its kobject
  blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()

Merge tag 'media/v4.11-2' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
"Media regression fixes:

   - serial_ir: fix a Kernel crash during boot on Kernel 4.11-rc1, due
     to an IRQ code called too early

   - other IR regression fixes at lirc and at the raw IR decoding

   - a deadlock fix at the RC nuvoton driver

   - fix another issue with DMA on stack at dw2102 driver

  There's an extra patch there that change a driver interface for the
  SoC VSP1 driver, with is shared between the DRM and V4L2 driver. The
  patch itself is trivial, and was acked by David Arlie"

* tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure
  [media] dw2102: don't do DMA on stack
  [media] rc: protocol is not set on register for raw IR devices
  [media] rc: raw decoder for keymap protocol is not loaded on register
  [media] rc: nuvoton: fix deadlock in nvt_write_wakeup_codes
  [media] lirc: fix dead lock between open and wakeup_filter
  [media] serial_ir: ensure we're ready to receive interrupts

Merge tag 'for-linus-4.11-rc1-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fix and cleanup from Juergen Gross:
"This contains one fix for MSIX handling under Xen and a trivial
  cleanup patch"

* tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xenbus: Remove duplicate inclusion of linux/init.h
  xen: do not re-use pirq number cached in pci device msi msg data

Merge branch 'pm-cpufreq-sched'

* pm-cpufreq-sched:
cpufreq: schedutil: Pass sg_policy to get_next_freq()
cpufreq: schedutil: move cached_raw_freq to struct sugov_policy

Merge branch 'pm-cpufreq'

* pm-cpufreq:
  cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy
  cpufreq: intel_pstate: Fix intel_pstate_verify_policy()
  cpufreq: intel_pstate: Fix global settings in active mode
  cpufreq: Add the "cpufreq.off=1" cmdline option
  cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily
  cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy()
  cpufreq: intel_pstate: Do not use performance_limits in passive mode

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull sched.h split-up fixes for MIPS from Ingo Molnar:
"These are the fixes for MIPS build failures due to the sched.h
split-up, from Arnd Bergmann"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MIPS: Add missing include files

mm, page_alloc: Add missing check for memory holes

Commit 13ad59df67f1 ("mm, page_alloc: avoid page_to_pfn() when merging
buddies") moved the check for memory holes out of page_is_buddy() and
had the callers do the check.

But this wasn't done correctly in one place which caused ia64 to crash
very early in boot.

Update to fix that and make ia64 boot again.

[ v2: Vlastimil pointed out we don't need to call page_to_pfn()
since we already have the result of that in "buddy_pfn" ]

Fixes: 13ad59df67f1 ("avoid page_to_pfn() when merging buddies")
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'ktest-v4.11-rc1' of git://git./linux/kernel/git/rostedt/linux-ktest

Pull ktest fixes from Steven Rostedt:
"Greg Kroah-Hartman reported to me that the ktest of v4.11-rc1 locked
  up in an infinite loop while doing the make mrproper.

  Looking into the cause I noticed that a recent update to the function
  run_command (used for running all shell commands, including "make
  mrproper") changed the internal loop to use the function
  wait_for_input.

  The wait_for_input function uses select to look at two file
  descriptors. One is the file descriptor of the command it is running,
  the other is STDIN. The STDIN check was not checking the return status
  of the sysread call, and was also just writing a lot of data into
  syswrite without regard to the size of the data read.

  Changing the code to check the return status of sysread, and also to
  still process the passed in descriptor data without looping back to
  the select fixed Greg's problem.

  While looking at this code I also realized that the loop did not honor
  the timeout if STDIN always had input (or for some reason return
  error). this could prevent wait_for_input to timeout on the file
  descriptor it is suppose to be waiting for. That is fixed too"

* tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Make sure wait_for_input does honor the timeout
  ktest: Fix while loop in wait_for_input

overlayfs: remove now unnecessary header file include

This removes the extra include header file that was added in commit
e58bc927835a "Pull overlayfs updates from Miklos Szeredi" now that it
is no longer needed.

There are probably other such includes that got added during the
scheduler header splitup series, but this is the one that annoyed me
personally and I know about.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xfs: try any AG when allocating the first btree block when reflinking

When a reflink operation causes the bmap code to allocate a btree block
we're currently doing single-AG allocations due to having ->firstblock
set and then try any higher AG due a little reflink quirk we've put in
when adding the reflink code. But given that we do not have a minleft
reservation of any kind in this AG we can still not have any space in
the same or higher AG even if the file system has enough free space.
To fix this use a XFS_ALLOCTYPE_FIRST_AG allocation in this fall back
path instead.

[And yes, we need to redo this properly instead of piling hacks over
hacks. I'm working on that, but it's not going to be a small series.
In the meantime this fixes the customer reported issue]

Also add a warning for failing allocations to make it easier to debug.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

sched/headers: fix up header file dependency on <linux/sched/signal.h>

The scheduler header file split and cleanups ended up exposing a few
nasty header file dependencies, and in particular it showed how we in
<linux/wait.h> ended up depending on "signal_pending()", which now comes
from <linux/sched/signal.h>.

That's a very subtle and annoying dependency, which already caused a
semantic merge conflict (see commit e58bc927835a "Pull overlayfs updates
from Miklos Szeredi", which added that fixup in the merge commit).

It turns out that we can avoid this dependency _and_ improve code
generation by moving the guts of the fairly nasty helper #define
__wait_event_interruptible_locked() to out-of-line code. The code that
includes the signal_pending() check is all in the slow-path where we
actually go to sleep waiting for the event anyway, so using a helper
function is the right thing to do.

Using a helper function is also what we already did for the non-locked
versions, see the "__wait_event*()" macros and the "prepare_to_wait*()"
set of helper functions.

We might want to try to unify all these macro games, we have a _lot_ of
subtly different wait-event loops. But this is the minimal patch to fix
the annoying header dependency.

Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xfs: use iomap new flag for newly allocated delalloc blocks

Commit fa7f138 ("xfs: clear delalloc and cache on buffered write
failure") fixed one regression in the iomap error handling code and
exposed another. The fundamental problem is that if a buffered write
is a rewrite of preexisting delalloc blocks and the write fails, the
failure handling code can punch out preexisting blocks with valid
file data.

This was reproduced directly by sub-block writes in the LTP
kernel/syscalls/write/write03 test. A first 100 byte write allocates
a single block in a file. A subsequent 100 byte write fails and
punches out the block, including the data successfully written by
the previous write.

To address this problem, update the ->iomap_begin() handler to
distinguish newly allocated delalloc blocks from preexisting
delalloc blocks via the IOMAP_F_NEW flag. Use this flag in the
->iomap_end() handler to decide when a failed or short write should
punch out delalloc blocks.

This introduces the subtle requirement that ->iomap_begin() should
never combine newly allocated delalloc blocks with existing blocks
in the resulting iomap descriptor. This can occur when a new
delalloc reservation merges with a neighboring extent that is part
of the current write, for example. Therefore, drop the
post-allocation extent lookup from xfs_bmapi_reserve_delalloc() and
just return the record inserted into the fork. This ensures only new
blocks are returned and thus that preexisting delalloc blocks are
always handled as "found" blocks and not punched out on a failed
rewrite.

Reported-by: Xiong Zhou <xzhou@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

axonram: Fix gendisk handling

It is invalid to call del_gendisk() when disk->queue is NULL. Fix error
handling in axon_ram_probe() to avoid doing that.

Also del_gendisk() does not drop a reference to gendisk allocated by
alloc_disk(). That has to be done by put_disk(). Add that call where
needed.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk: improve order of bio handling in generic_make_request()

To avoid recursion on the kernel stack when stacked block devices
are in use, generic_make_request() will, when called recursively,
queue new requests for later handling.  They will be handled when the
make_request_fn for the current bio completes.

If any bios are submitted by a make_request_fn, these will ultimately
be handled seqeuntially.  If the handling of one of those generates
further requests, they will be added to the end of the queue.

This strict first-in-first-out behaviour can lead to deadlocks in
various ways, normally because a request might need to wait for a
previous request to the same device to complete.  This can happen when
they share a mempool, and can happen due to interdependencies
particular to the device.  Both md and dm have examples where this happens.

These deadlocks can be erradicated by more selective ordering of bios.
Specifically by handling them in depth-first order.  That is: when the
handling of one bio generates one or more further bios, they are
handled immediately after the parent, before any siblings of the
parent.  That way, when generic_make_request() calls make_request_fn
for some particular device, we can be certain that all previously
submited requests for that device have been completely handled and are
not waiting for anything in the queue of requests maintained in
generic_make_request().

An easy way to achieve this would be to use a last-in-first-out stack
instead of a queue.  However this will change the order of consecutive
bios submitted by a make_request_fn, which could have unexpected consequences.
Instead we take a slightly more complex approach.
A fresh queue is created for each call to a make_request_fn.  After it completes,
any bios for a different device are placed on the front of the main queue, followed
by any bios for the same device, followed by all bios that were already on
the queue before the make_request_fn was called.
This provides the depth-first approach without reordering bios on the same level.

This, by itself, it not enough to remove all deadlocks.  It just makes
it possible for drivers to take the extra step required themselves.

To avoid deadlocks, drivers must never risk waiting for a request
after submitting one to generic_make_request.  This includes never
allocing from a mempool twice in the one call to a make_request_fn.

A common pattern in drivers is to call bio_split() in a loop, handling
the first part and then looping around to possibly split the next part.
Instead, a driver that finds it needs to split a bio should queue
(with generic_make_request) the second part, handle the first part,
and then return.  The new code in generic_make_request will ensure the
requests to underlying bios are processed first, then the second bio
that was split off.  If it splits again, the same process happens.  In
each case one bio will be completely handled before the next one is attempted.

With this is place, it should be possible to disable the
punt_bios_to_recover() recovery thread for many block devices, and
eventually it may be possible to remove it completely.

Ref: http://www.spinics.net/lists/raid/msg54680.html
Tested-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Inspired-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Revert "scsi, block: fix duplicate bdi name registration crashes"

This reverts commit 0dba1314d4f81115dce711292ec7981d17231064. It causes
leaking of device numbers for SCSI when SCSI registers multiple gendisks
for one request_queue in succession. It can be easily reproduced using
Omar's script [1] on kernel with CONFIG_DEBUG_TEST_DRIVER_REMOVE.
Furthermore the protection provided by this commit is not needed anymore
as the problem it was fixing got also fixed by commit 165a5e22fafb
"block: Move bdi_unregister() to del_gendisk()".

[1]: http://marc.info/?l=linux-block&m=148554717109098&w=2

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

block: Make del_gendisk() safer for disks without queues

Commit 165a5e22fafb "block: Move bdi_unregister() to del_gendisk()"
added disk->queue dereference to del_gendisk(). Although del_gendisk()
is not supposed to be called without disk->queue valid and
blk_unregister_queue() warns in that case, this change will make it oops
instead. Return to the old more robust behavior of just warning when
del_gendisk() gets called for gendisk with disk->queue being NULL.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

bdi: Fix use-after-free in wb_congested_put()

bdi_writeback_congested structures get created for each blkcg and bdi
regardless whether bdi is registered or not. When they are created in
unregistered bdi and the request queue (and thus bdi) is then destroyed
while blkg still holds reference to bdi_writeback_congested structure,
this structure will be referencing freed bdi and last wb_congested_put()
will try to remove the structure from already freed bdi.

With commit 165a5e22fafb "block: Move bdi_unregister() to
del_gendisk()", SCSI started to destroy bdis without calling
bdi_unregister() first (previously it was calling bdi_unregister() even
for unregistered bdis) and thus the code detaching
bdi_writeback_congested in cgwb_bdi_destroy() was not triggered and we
started hitting this use-after-free bug. It is enough to boot a KVM
instance with virtio-scsi device to trigger this behavior.

Fix the problem by detaching bdi_writeback_congested structures in
bdi_exit() instead of bdi_unregister(). This is also more logical as
they can get attached to bdi regardless whether it ever got registered
or not.

Fixes: 165a5e22fafb127ecb5914e12e8c32a1f0d3f820
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

block: Allow bdi re-registration

SCSI can call device_add_disk() several times for one request queue when
a device in unbound and bound, creating new gendisk each time. This will
lead to bdi being repeatedly registered and unregistered. This was not a
big problem until commit 165a5e22fafb "block: Move bdi_unregister() to
del_gendisk()" since bdi was only registered repeatedly (bdi_register()
handles repeated calls fine, only we ended up leaking reference to
gendisk due to overwriting bdi->owner) but unregistered only in
blk_cleanup_queue() which didn't get called repeatedly. After
165a5e22fafb we were doing correct bdi_register() - bdi_unregister()
cycles however bdi_unregister() is not prepared for it. So make sure
bdi_unregister() cleans up bdi in such a way that it is prepared for
a possible following bdi_register() call.

An easy way to provoke this behavior is to enable
CONFIG_DEBUG_TEST_DRIVER_REMOVE and use scsi_debug driver to create a
scsi disk which immediately hangs without this fix.

Fixes: 165a5e22fafb127ecb5914e12e8c32a1f0d3f820
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

block/sed: Fix opal user range check and unused variables

Fixes check that the opal user is within the range, and cleans up unused
method variables.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

zram: set physical queue limits to avoid array out of bounds accesses

zram can handle at most SECTORS_PER_PAGE sectors in a bio's bvec. When using
the NVMe over Fabrics loopback target which potentially sends a huge bulk of
pages attached to the bio's bvec this results in a kernel panic because of
array out of bounds accesses in zram_decompress_page().

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq: free hctx->cpumask in release handler of hctx's kobject

It is obviously that hctx->cpumask is per hctx, and both
share same lifetime, so this patch moves freeing of hctx->cpumask
into release handler of hctx's kobject.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq: make lifetime consistent between hctx and its kobject

This patch removes kobject_put() over hctx in __blk_mq_unregister_dev(),
and trys to keep lifetime consistent between hctx and hctx's kobject.

Now blk_mq_sysfs_register() and blk_mq_sysfs_unregister() become
totally symmetrical, and kobject's refcounter drops to zero just
when the hctx is freed.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq: make lifetime consitent between q/ctx and its kobject

Currently from kobject view, both q->mq_kobj and ctx->kobj can
be released during one cycle of blk_mq_register_dev() and
blk_mq_unregister_dev(). Actually, sw queue's lifetime is
same with its request queue's, which is covered by request_queue->kobj.

So we don't need to call kobject_put() for the two kinds of
kobject in __blk_mq_unregister_dev(), instead we do that
in release handler of request queue.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()

Both q->mq_kobj and sw queues' kobjects should have been initialized
once, instead of doing that each add_disk context.

Also this patch removes clearing of ctx in blk_mq_init_cpu_queues()
because percpu allocator fills zero to allocated variable.

This patch fixes one issue[1] reported from Omar.

[1] kernel wearning when doing unbind/bind on one scsi-mq device

[   19.347924] kobject (ffff8800791ea0b8): tried to init an initialized object, something is seriously wrong.
[   19.349781] CPU: 1 PID: 84 Comm: kworker/u8:1 Not tainted 4.10.0-rc7-00210-g53f39eeaa263 #34
[   19.350686] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-20161122_114906-anatol 04/01/2014
[   19.350920] Workqueue: events_unbound async_run_entry_fn
[   19.350920] Call Trace:
[   19.350920]  dump_stack+0x63/0x83
[   19.350920]  kobject_init+0x77/0x90
[   19.350920]  blk_mq_register_dev+0x40/0x130
[   19.350920]  blk_register_queue+0xb6/0x190
[   19.350920]  device_add_disk+0x1ec/0x4b0
[   19.350920]  sd_probe_async+0x10d/0x1c0 [sd_mod]
[   19.350920]  async_run_entry_fn+0x48/0x150
[   19.350920]  process_one_work+0x1d0/0x480
[   19.350920]  worker_thread+0x48/0x4e0
[   19.350920]  kthread+0x101/0x140
[   19.350920]  ? process_one_work+0x480/0x480
[   19.350920]  ? kthread_create_on_node+0x60/0x60
[   19.350920]  ret_from_fork+0x2c/0x40

Cc: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

ktest: Make sure wait_for_input does honor the timeout

The function wait_for_input takes in a timeout, and even has a default
timeout. But if for some reason the STDIN descriptor keeps sending in data,
the function will never time out. The timout is to wait for the data from
the passed in file descriptor, not for STDIN. Adding a test in the case
where there's no data from the passed in file descriptor that checks to see
if the timeout passed, will ensure that it will timeout properly even if
there's input in STDIN.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

ktest: Fix while loop in wait_for_input

The run_command function was changed to use the wait_for_input function to
allow having a timeout if the command to run takes too much time. There was
a bug in the wait_for_input where it could end up going into an infinite
loop. There's two issues here. One is that the return value of the sysread
wasn't used for the write (to write a proper size), and that it should
continue processing the passed in file descriptor too even if there was
input. There was no check for error, if for some reason STDIN returned an
error, the function would go into an infinite loop and never exit.

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 6e98d1b4415f ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

MIPS: Add missing include files

After the split of linux/sched.h, several platforms in arch/mips stopped building.

Add the respective additional #include statements to fix the problem I first
tried adding these into asm/processor.h, but ran into circular header
dependencies with that which I could not figure out.

The commit I listed as causing the problem is the branch merge, as there is
likely a combination of multiple patches in that branch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
Fixes: 1827adb11ad2 ("Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip")
Link: http://lkml.kernel.org/r/20170308072931.3836696-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

xfs: remove kmem_zalloc_greedy

The sole remaining caller of kmem_zalloc_greedy is bulkstat, which uses
it to grab 1-4 pages for staging of inobt records. The infinite loop in
the greedy allocation function is causing hangs[1] in generic/269, so
just get rid of the greedy allocator in favor of kmem_zalloc_large.
This makes bulkstat somewhat more likely to ENOMEM if there's really no
pages to spare, but eliminates a source of hangs.

[1] http://lkml.kernel.org/r/20170301044634.rgidgdqqiiwsmfpj%40XZHOUW.usersys.redhat.com

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
v2: remove single-page fallback

xfs: Use xfs_icluster_size_fsb() to calculate inode alignment mask

When block size is larger than inode cluster size, the call to
XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size) returns 0. Also, mkfs.xfs
would have set xfs_sb->sb_inoalignmt to 0. Hence in
xfs_set_inoalignment(), xfs_mount->m_inoalign_mask gets initialized to
-1 instead of 0. However, xfs_mount->m_sinoalign would get correctly
intialized to 0 because for every positive value of xfs_mount->m_dalign,
the condition "!(mp->m_dalign & mp->m_inoalign_mask)" would evaluate to
false.

Also, xfs_imap() worked fine even with xfs_mount->m_inoalign_mask having
-1 as the value because blks_per_cluster variable would have the value 1
and hence we would never have a need to use xfs_mount->m_inoalign_mask
to compute the inode chunk's agbno and offset within the chunk.

Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: fix and streamline error handling in xfs_end_io

There are two different cases of buffered I/O errors:

- first we can have an already shutdown fs.  In that case we should skip
   any on-disk operations and just clean up the appen transaction if
   present and destroy the ioend
- a real I/O error.  In that case we should cleanup any lingering COW
   blocks.  This gets skipped in the current code and is fixed by this
   patch.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

xfs: only reclaim unwritten COW extents periodically

We only want to reclaim preallocations from our periodic work item.
Currently this is archived by looking for a dirty inode, but that check
is rather fragile. Instead add a flag to xfs_reflink_cancel_cow_* so
that the caller can ask for just cancelling unwritten extents in the COW
fork.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix typos in commit message]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Misc fixes and minor updates all over the place:

   - an SGI/UV fix
   - a defconfig update
   - a build warning fix
   - move the boot_params file to the arch location in debugfs
   - a pkeys fix
   - selftests fix
   - boot message fixes
   - sparse fixes
   - a resume warning fix
   - ioapic hotplug fixes
   - reboot quirks

  ... plus various minor cleanups"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build/x86_64_defconfig: Enable CONFIG_R8169
  x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirk
  x86/hpet: Prevent might sleep splat on resume
  x86/boot: Correct setup_header.start_sys name
  x86/purgatory: Fix sparse warning, symbol not declared
  x86/purgatory: Make functions and variables static
  x86/events: Remove last remnants of old filenames
  x86/pkeys: Check against max pkey to avoid overflows
  x86/ioapic: Split IOAPIC hot-removal into two steps
  x86/PCI: Implement pcibios_release_device to release IRQ from IOAPIC
  x86/intel_rdt: Remove duplicate inclusion of linux/cpu.h
  x86/vmware: Remove duplicate inclusion of asm/timer.h
  x86/hyperv: Hide unused label
  x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk
  x86/platform/uv/BAU: Fix HUB errors by remove initial write to sw-ack register
  x86/selftests: Add clobbers for int80 on x86_64
  x86/apic: Simplify enable_IR_x2apic(), remove try_to_enable_IR()
  x86/apic: Fix a warning message in logical CPU IDs allocation
  x86/kdebugfs: Move boot params hierarchy under (debugfs)/x86/

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Ingo Molnar:
"This includes a fix for lockups caused by incorrect nsecs related
  cleanup, and a capabilities check fix for timerfd"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  jiffies: Revert bogus conversion of NSEC_PER_SEC to TICK_NSEC
  timerfd: Only check CAP_WAKE_ALARM when it is needed

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
"A fix for KVM's scheduler clock which (erroneously) was always marked
  unstable, a fix for RT/DL load balancing, plus latency fixes"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface
  sched/core: Fix pick_next_task() for RT,DL
  sched/fair: Make select_idle_cpu() more aggressive

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"This includes a fix for a crash if certain special addresses are
  kprobed, plus does a rename of two Kconfig variables that were a minor
  misnomer"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS
  kprobes/x86: Fix kernel panic when certain exception-handling addresses are probed

Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Ingo Molnar:

- Change the new refcount_t warnings from WARN() to WARN_ONCE()

- two ww_mutex fixes

- plus a new lockdep self-consistency check for a bug that triggered in
   practice

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/ww_mutex: Adjust the lock number for stress test
  locking/lockdep: Add nest_lock integrity test
  locking/ww_mutex: Replace cpu_relax() with cond_resched() for tests
  locking/refcounts: Change WARN() to WARN_ONCE()

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull IRQ fix from Ingo Molnar:
"Fix an ARM TI DRA7XX SoC irqchip driver local variables type
bug/warning"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/crossbar: Fix incorrect type of local variables

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
"A boot crash fix, and a secure boot related boot messages fix"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm: Fix boot crash with CONFIG_CPUMASK_OFFSTACK=y
efi/libstub: Treat missing SecureBoot variable as Secure Boot disabled

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull core fixes from Ingo Molnar:
"A couple of sched.h splitup related build fixes, plus an objtool fix"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix another GCC jump table detection issue
  drivers/char/nwbutton: Fix build breakage caused by include file reshuffling
  h8300: Fix build breakage caused by header file changes
  avr32: Fix build error caused by include file reshuffling

PCI/ASPM: Always set link->downstream to avoid NULL dereference on remove

We call pcie_aspm_exit_link_state() when we remove a device.  If the device
is the last PCIe function to be removed below a bridge and the bridge has
an ASPM link_state struct, we disable ASPM on the link.  Disabling ASPM
requires link->downstream (used in pcie_config_aspm_link()).

We previously set link->downstream in pcie_aspm_cap_init(), but only if the
device was not blacklisted.  Removing the blacklisted device caused a NULL
pointer dereference in the pcie_aspm_exit_link_state() ->
pcie_config_aspm_link() path:

  # echo 1 > /sys/bus/pci/devices/0000\:0b\:00.0/remove
  ...
   BUG: unable to handle kernel NULL pointer dereference at 0000000000000080
   IP: pcie_config_aspm_link+0x5d/0x2b0
   Call Trace:
    pcie_aspm_exit_link_state+0x75/0x130
    pci_stop_bus_device+0xa4/0xb0
    pci_stop_and_remove_bus_device_locked+0x1a/0x30
    remove_store+0x50/0x70
    dev_attr_store+0x18/0x30
    sysfs_kf_write+0x44/0x60
    kernfs_fop_write+0x10e/0x190
    __vfs_write+0x28/0x110
    ? rcu_read_lock_sched_held+0x5d/0x80
    ? rcu_sync_lockdep_assert+0x2c/0x60
    ? __sb_start_write+0x173/0x1a0
    ? vfs_write+0xb3/0x180
    vfs_write+0xc4/0x180
    SyS_write+0x49/0xa0
    do_syscall_64+0xa6/0x1c0
    entry_SYSCALL64_slow_path+0x25/0x25
   ---[ end trace bd187ee0267df5d9 ]---

To avoid this, set link->downstream in alloc_pcie_link_state(), so every
pcie_link_state structure has a valid link->downstream pointer.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rajat Jain <rajatja@google.com>
CC: stable@vger.kernel.org

PCI: Prevent VPD access for QLogic ISP2722

QLogic ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter has the VPD
access issue too, while read the common pci-sysfs access interface shown as

/sys/devices/pci0000:00/0000:00:03.2/0000:0b:00.0/vpd

with simple 'cat' could cause system hang and panic:

  Kernel panic - not syncing: An NMI occurred. Depending on your system the reason for the NMI is logged in any one of the following resources:
  1. Integrated Management Log (IML)
  2. OA Syslog
  3. OA Forward Progress Log
  4. iLO Event Log
  CPU: 0 PID: 15070 Comm: udevadm Not tainted 4.1.12
  Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 12/27/2015
   0000000000000086 000000007f0cdf51 ffff880c4fa05d58 ffffffff817193de
   ffffffffa00b42d8 0000000000000075 ffff880c4fa05dd8 ffffffff81714072
   0000000000000008 ffff880c4fa05de8 ffff880c4fa05d88 000000007f0cdf51
  Call Trace:
   <NMI>  [<ffffffff817193de>] dump_stack+0x63/0x81
   [<ffffffff81714072>] panic+0xd0/0x20e
   [<ffffffffa00b390d>] hpwdt_pretimeout+0xdd/0xe0 [hpwdt]
   [<ffffffff81021fc9>] ? sched_clock+0x9/0x10
   [<ffffffff8101c101>] nmi_handle+0x91/0x170
   [<ffffffff8101c10c>] ? nmi_handle+0x9c/0x170
   [<ffffffff8101c5fe>] io_check_error+0x1e/0xa0
   [<ffffffff8101c719>] default_do_nmi+0x99/0x140
   [<ffffffff8101c8b4>] do_nmi+0xf4/0x170
   [<ffffffff817232c5>] end_repeat_nmi+0x1a/0x1e
   [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
   [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
   [<ffffffff815d724b>] ? pci_conf1_read+0xeb/0x120
   <<EOE>>  [<ffffffff815db4b3>] raw_pci_read+0x23/0x40
   [<ffffffff815db4fc>] pci_read+0x2c/0x30
   [<ffffffff8136f612>] pci_user_read_config_word+0x72/0x110
   [<ffffffff8136f746>] pci_vpd_pci22_wait+0x96/0x130
   [<ffffffff8136ff9b>] pci_vpd_pci22_read+0xdb/0x1a0
   [<ffffffff8136ea30>] pci_read_vpd+0x20/0x30
   [<ffffffff8137d590>] read_vpd_attr+0x30/0x40
   [<ffffffff8128e037>] sysfs_kf_bin_read+0x47/0x70
   [<ffffffff8128d24e>] kernfs_fop_read+0xae/0x180
   [<ffffffff8120dd97>] __vfs_read+0x37/0x100
   [<ffffffff812ba7e4>] ? security_file_permission+0x84/0xa0
   [<ffffffff8120e366>] ? rw_verify_area+0x56/0xe0
   [<ffffffff8120e476>] vfs_read+0x86/0x140
   [<ffffffff8120f3f5>] SyS_read+0x55/0xd0
   [<ffffffff81720f2e>] system_call_fastpath+0x12/0x71
  Shutting down cpus with NMI
  Kernel Offset: disabled
  drm_kms_helper: panic occurred, switching back to text console

So blacklist the access to its VPD.

Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v4.6+

Merge branch 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax

Pull idr fix (and new tests) from Matthew Wilcox:
"One urgent patch in here; freeing the correct IDA bitmap.

  Everything else is changes to the test suite"

* 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax:
  radix tree test suite: Specify -m32 in LDFLAGS too
  ida: Free correct IDA bitmap
  radix tree test suite: Depend on Makefile and quieten grep
  radix tree test suite: Fix build with --as-needed
  radix tree test suite: Build 32 bit binaries
  radix tree test suite: Add performance test for radix_tree_join()
  radix tree test suite: Add performance test for radix_tree_split()
  radix tree test suite: Add performance benchmarks
  radix tree test suite: Add test for radix_tree_clear_tags()
  radix tree test suite: Add tests for ida_simple_get() and ida_simple_remove()
  radix tree test suite: Add test for idr_get_next()

PCI: exynos: Initialize elbi_base even when using PHY framework

Even when using the PHY framework, we need the elbi_base. Before this
patch, we didn't initialize elbi_base, which caused NULL pointer
dereferences later.

Fixes: e7cd7ef58e1f ("PCI: exynos: Support the PHY generic framework")
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Merge tag 'powerpc-4.11-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Five fairly small fixes for things that went in this cycle.

  A fairly large patch to rework the CAS logic on Power9, necessitated
  by a late change to the firmware API, and we can't boot without it.

  Three fixes going to stable, allowing more instructions to be emulated
  on LE, fixing a boot crash on 32-bit Freescale BookE machines, and the
  OPAL XICS workaround.

  And a patch from me to sort the selects under CONFIG PPC. Annoying
  churn, but worth it in the long run, and best for it to go in now to
  avoid conflicts.

  Thanks to:
    Alexey Kardashevskiy, Anton Blanchard, Balbir Singh, Gautham R.
    Shenoy, Laurentiu Tudor, Nicholas Piggin, Paul Mackerras, Ravi
    Bangoria, Sachin Sant, Shile Zhang, Suraj Jitindar Singh"

* tag 'powerpc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Sort the selects under CONFIG_PPC
  powerpc/64: Fix L1D cache shape vector reporting L1I values
  powerpc/64: Avoid panic during boot due to divide by zero in init_cache_info()
  powerpc: Update to new option-vector-5 format for CAS
  powerpc: Parse the command line before calling CAS
  powerpc/xics: Work around limitations of OPAL XICS priority handling
  powerpc/64: Fix checksum folding in csum_add()
  powerpc/powernv: Fix opal tracepoints with JUMP_LABEL=n
  powerpc/booke: Fix boot crash due to null hugepd
  powerpc: Fix compiling a BE kernel with a powerpc64le toolchain
  selftest/powerpc: Fix false failures for skipped tests
  powerpc/powernv: Fix bug due to labeling ambiguity in power_enter_stop
  powerpc/64: Invalidate process table caching after setting process table
  powerpc: emulate_step() tests for load/store instructions
  powerpc: Emulation support for load/store instructions on LE

Merge branch 'stable/for-linus-4.11' of git://git./linux/kernel/git/konrad/swiotlb

Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Two tiny implementations of the DMA API for callback in ARM (for Xen)"

* 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb-xen: implement xen_swiotlb_get_sgtable callback
swiotlb-xen: implement xen_swiotlb_dma_mmap callback

radix tree test suite: Specify -m32 in LDFLAGS too

Michael's patch to use the default make rule for linking and the patch
from Rehas to use -m32 if building a 32-bit test-suite on a 64-bit
platform don't work well together.

Reported-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

ida: Free correct IDA bitmap

There's a relatively rare race where we look at the per-cpu preallocated
IDA bitmap, see it's NULL, allocate a new one, and atomically update it.
If the kmalloc() happened to sleep and we were rescheduled to a different
CPU, or an interrupt came in at the exact right time, another task
might have successfully allocated a bitmap and already deposited it.
I forgot what the semantics of cmpxchg() were and ended up freeing the
wrong bitmap leading to KASAN reporting a use-after-free.

Dmitry found the bug with syzkaller & wrote the patch. I wrote the test
case that will reproduce the bug without his patch being applied.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

radix tree test suite: Depend on Makefile and quieten grep

Changing the CFLAGS in the Makefile didn't always lead to a
recompilation because the OFILES didn't depend on the Makefile.
Also, after doing make clean, grep would still complain about
a missing map-shift.h; we need -s as well as -q.

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

radix tree test suite: Fix build with --as-needed

Currently the radix tree test suite doesn't build with toolchains that
use --as-needed by default, for example Ubuntu's:

  cc -I. -I../../include -g -O2 -Wall -D_LGPL_SOURCE -fsanitize=address -lpthread -lurcu main.o ... -o main
  /usr/bin/ld: regression1.o: undefined reference to symbol 'pthread_join@@GLIBC_2.17'
  /lib/powerpc64le-linux-gnu/libpthread.so.0: error adding symbols: DSO missing from command line
  collect2: error: ld returned 1 exit status

This is caused by the custom makefile rules placing LDFLAGS before the
.o files that need the libraries.

We could fix it by using --no-as-needed, or rewriting the custom rules.
But we can also just drop the custom rules and move the libraries to
LDLIBS, and then the default rules work correctly - with the one caveat
that we need to add -fsanitize=address to LDFLAGS because that must be
passed to the linker as well as the compiler.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

radix tree test suite: Build 32 bit binaries

Add option 'make BUILD=32' for building 32-bit binaries.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

radix tree test suite: Add performance test for radix_tree_join()

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

radix tree test suite: Add performance test for radix_tree_split()

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

radix tree test suite: Add performance benchmarks

Add performance benchmarks for radix tree insertion, tagging and deletion.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

radix tree test suite: Add test for radix_tree_clear_tags()

Assert that radix_tree_clear_tags() clears the tags on the passed node and
slot. Assert that the case where the radix tree has only one entry at index
zero and the node is NULL, is also handled.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

radix tree test suite: Add tests for ida_simple_get() and ida_simple_remove()

Assert that ida_simple_get() allocates an id in the passed range or returns
error on failure, and ida_simple_remove() releases an allocated id.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

radix tree test suite: Add test for idr_get_next()

Assert that idr_get_next() returns the next populated entry in the tree with
an ID greater than or equal to the value pointed to by @nextid argument.

Signed-off-by: Rehas Sachdeva <aquannie@gmail.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>

Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull namespace fix from Eric Biederman:
"This fixes a race between put_ucounts and get_ucounts that can cause a
  use after free. The fix works by simplifying the code and so there is
  not even a temptation to be clever and play spinlock vs atomic
  reference games"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucount: Remove the atomicity from ucount->count

Merge tag 'trace-v4.11-rc1' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"There was some breakage with the changes for jump labels in the 4.11
  merge window:

   - powerpc broke as jump labels uses the two LSB bits as flags in
     initialization.

     A check was added to make sure that all jump label entries were 4
     bytes aligned, but powerpc didn't work that way for modules. Adding
     an alignment in the module linker script appeared to be the best
     solution.

   - Jump labels also added an anonymous union to access those LSB bits
     as a normal long. But because this structure had static
     initialization, it broke older compilers that could not statically
     initialize anonymous unions without brackets.

   - The command line parameter for setting function graph filter broke
     the "EMPTY_HASH" descriptor by modifying it instead of creating a
     new hash to hold the entries.

   - The command line parameter ftrace_graph_max_depth was added to
     allow its setting at boot time. It uses existing code and only the
     command line hook was added.

     This is not really a fix, but as it uses existing code without
     affecting anything else, I added it to this release. It was ready
     before the merge window closed, but I wanted to let it sit in
     linux-next for a couple of days first"

* tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/graph: Add ftrace_graph_max_depth kernel parameter
  tracing: Add #undef to fix compile error
  jump_label: Add comment about initialization order for anonymous unions
  jump_label: Fix anonymous union initialization
  module: set __jump_table alignment to 8
  ftrace/graph: Do not modify the EMPTY_HASH for the function_graph filter
  tracing: Fix code comment for ftrace_ops_get_func()

[media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure

The interface to configure the LIF in the VSP1 requires adapting the
function prototype for any changes. This makes extending the interface
difficult.

Change the function prototype to pass a structure which can be easily
extended.

This changes the means of disabling the pipeline, by now passing a NULL
configuration rather than passing either a 0 width or height.

[Fixed kerneldoc, made vsp1_du_setup_lif() cfg argument const]

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

jiffies: Revert bogus conversion of NSEC_PER_SEC to TICK_NSEC

commit 93825f2ec736 converted NSEC_PER_SEC to TICK_NSEC because the author
confused NSEC_PER_JIFFY with NSEC_PER_SEC.

As a result, the calculation of refined jiffies got broken, triggering
lockups.

Fixes: 93825f2ec736 ("jiffies: Reuse TICK_NSEC instead of NSEC_PER_JIFFY")
Reported-and-tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1488880534-3777-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

objtool: Fix another GCC jump table detection issue

Arnd Bergmann reported a (false positive) objtool warning:

  drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0xfe: sibling call from callable instruction with changed frame pointer

The issue is in find_switch_table().  It tries to find a switch
statement's jump table by walking backwards from an indirect jump
instruction, looking for a relocation to the .rodata section.  In this
case it stopped walking prematurely: the first .rodata relocation it
encountered was for a variable (resp_state_name) instead of a jump
table, so it just assumed there wasn't a jump table.

The fix is to ignore any .rodata relocation which refers to an ELF
object symbol.  This works because the jump tables are anonymous and
have no symbols associated with them.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection")
Link: http://lkml.kernel.org/r/20170302225723.3ndbsnl4hkqbne7a@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>

drivers/char/nwbutton: Fix build breakage caused by include file reshuffling

Fix:

drivers/char/nwbutton.c: In function 'button_sequence_finished':
drivers/char/nwbutton.c:134:3: error: implicit declaration of function 'kill_cad_pid'

The declaration has been moved from one include file to another.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c3edc4010e9d102 ("sched/headers: Move task_struct::signal and ...")
Link: http://lkml.kernel.org/r/1488762811-9022-1-git-send-email-linux@roeck-us.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>

h8300: Fix build breakage caused by header file changes

Fix the following h8300 build failures:

arch/h8300/kernel/ptrace_h.c: In function ‘trace_trap’:
arch/h8300/kernel/ptrace_h.c:253:3: error: implicit declaration of function ‘force_sig’

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: uclinux-h8-devel@lists.sourceforge.jp
Fixes: c3edc4010e9d ("sched/headers: Move task_struct::signal and ...")
Link: http://lkml.kernel.org/r/1488738434-3504-1-git-send-email-linux@roeck-us.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>

avr32: Fix build error caused by include file reshuffling

Various avr32 builds fail:

arch/avr32/oprofile/backtrace.c:58: error: dereferencing pointer to incomplete type
arch/avr32/oprofile/backtrace.c:60: error: implicit declaration of function 'user_mode'

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: oprofile-list@lists.sf.net
Fixes: f780d89a0e82 ("sched/headers: Remove <asm/ptrace.h> from ...")
Link: http://lkml.kernel.org/r/1488762357-4500-1-git-send-email-linux@roeck-us.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>

ucount: Remove the atomicity from ucount->count

Always increment/decrement ucount->count under the ucounts_lock.  The
increments are there already and moving the decrements there means the
locking logic of the code is simpler.  This simplification in the
locking logic fixes a race between put_ucounts and get_ucounts that
could result in a use-after-free because the count could go zero then
be found by get_ucounts and then be freed by put_ucounts.

A bug presumably this one was found by a combination of syzkaller and
KASAN.  JongWhan Kim reported the syzkaller failure and Dmitry Vyukov
spotted the race in the code.

Cc: stable@vger.kernel.org
Fixes: f6b2db1a3e8d ("userns: Make the count of user namespaces per user")
Reported-by: JongHwan Kim <zzoru007@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

iomap: invalidate page caches should be after iomap_dio_complete() in direct write

After XFS switching to iomap based DIO (commit acdda3aae146 ("xfs:
use iomap_dio_rw")), I started to notice dio29/dio30 tests failures
from LTP run on ppc64 hosts, and they can be reproduced on x86_64
hosts with 512B/1k block size XFS too.

dio29 diotest3 -b 65536 -n 100 -i 1000 -o 1024000
dio30 diotest6 -b 65536 -n 100 -i 1000 -o 1024000

The failure message is like:
bufcmp: offset 0: Expected: 0x62, got 0x0
diotest03    1  TPASS  :  Read with Direct IO, Write without
diotest03    2  TFAIL  :  diotest3.c:142: comparsion failed; child=98 offset=1425408
diotest03    3  TFAIL  :  diotest3.c:194: Write Direct-child 98 failed

Direct write wrote 0x62 but buffer read got zero. This is because,
when doing direct write to a hole or preallocated file, we
invalidate the page caches before converting the extent from
unwritten state to normal state, which is done by
iomap_dio_complete(), thus leave a window for other buffer reader to
cache the unwritten state extent.

Consider this case, with sub-page blocksize XFS, two processes are
direct writing to different blocksize-aligned regions (say 512B) of
the same preallocated file, and reading the region back via buffered
I/O to compare contents.

process A, region [0,512] process B, region [512,1024]
xfs_file_write_iter
xfs_file_aio_dio_write
  iomap_dio_rw
   iomap_apply
   invalidate_inode_pages2_range
    xfs_file_write_iter
xfs_file_aio_dio_write
  iomap_dio_rw
   iomap_apply
   invalidate_inode_pages2_range
   iomap_dio_complete
xfs_file_read_iter
xfs_file_buffered_aio_read
  generic_file_read_iter
   do_generic_file_read
    <readahead fills pagecache with 0>
   iomap_dio_complete
xfs_file_read_iter
<read gets 0 from pagecache>

Process A first invalidates page caches, at this point the
underlying extent is still in unwritten state (iomap_dio_complete
not called yet), and process B finishs direct write and populates
page caches via readahead, which caches zeros in page for region A,
then process A reads zeros from page cache, instead of the actual
data.

Fix it by invalidating page caches after converting unwritten extent
to make sure we read content from disk after extent state changed,
as what we did before switching to iomap based dio.

Also introduce a new 'start' variable to save the original write
offset (iomap_dio_complete() updates iocb->ki_pos), and a 'err'
variable for invalidating caches result, cause we can't reuse 'ret'
anymore.

Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

[media] dw2102: don't do DMA on stack

On Kernel 4.9, WARNINGs about doing DMA on stack are hit at
the dw2102 driver: one in su3000_power_ctrl() and the other in tt_s2_4600_frontend_attach().

Both were due to the use of buffers on the stack as parameters to
dvb_usb_generic_rw() and the resulting attempt to do DMA with them.

The device was non-functional as a result.

So, switch this driver over to use a buffer within the device state
structure, as has been done with other DVB-USB drivers.

Tested with TechnoTrend TT-connect S2-4600.

[mchehab@osg.samsung.com: fixed a warning at su3000_i2c_transfer() that
state var were dereferenced before check 'd']
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

powerpc: Sort the selects under CONFIG_PPC

We have a big list of selects under CONFIG_PPC, and currently they're
completely unsorted. This means people tend to add new selects at the
bottom of the list, and so two commits which both add a new select will
often conflict.

Instead sort it alphabetically. This is nicer in and of itself, but also
means two commits that add a new select will have a greater chance of
not conflicting.

Add a note at the top and bottom asking people to keep it sorted.

And while we're here pad out the 'if' expressions to make them stand
out.

Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/64: Fix L1D cache shape vector reporting L1I values

It seems we didn't pay quite enough attention when testing the new cache
shape vectors, which means we didn't notice the bug where the vector for
the L1D was using the L1I values. Fix it, resulting in eg:

  L1I  cache size:     0x8000      32768B         32K
  L1I  line size:        0x80       8-way associative
  L1D  cache size:    0x10000      65536B         64K
  L1D  line size:        0x80       8-way associative

Fixes: 98a5f361b862 ("powerpc: Add new cache geometry aux vectors")
Cut-and-paste-bug-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Badly-reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>