staging: ozwpan: High resolution timers

Current implementation assumes HZ = 1000 for calculating
all internal timer intervals, which creates problem on
platforms where HZ != 1000.

As well we need resolution of less than 10 mSec for heartbeat
calculation, this creates problem on some platforms where HZ is
configured as HZ = 100, or around, which restricts us to timer interval
of 10 mSec. This is particularly found on embedded devices.

This patch moves on to use high resolution timers to calculate
all timer intervals as it allows us to have very small resolution
of timer interval, removing dependency on HZ.

Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt9812: Resolve different base types warnings.

Resolves warnings from the "sparse" checker of the form "warning: incorrect
type in assignment (different base types)".

Signed-off-by: Shaun Laing <shaun@xresource.ca>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: allow ISA and PC/104 drivers on non-ISA systems

Embedded systems with a PC/104 bus might have a configuration that
does not have ISA enabled. This creates a problem in Comedi where
the PC/104 drivers cannot be enabled.

Remove the 'depends on ISA' for the "Comedi ISA and PC/104 drivers"
menu to allow the user to select these drivers on non-ISA systems.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: absorb usbduxsigma_attach_common() into caller

This function is only called by usbduxsigma_auto_attach(). Absorb it
and refactor the code a bit to match the usbdux driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_free_usb_buffers()

For aesthetics, pass the comedi_device pointer to this function
instead of the private data pointer.

The usb_kill_urb() calls are not needed. All the urbs were unlinked
before this function was called.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_detach()

Make sure the usb intfdata is always cleared when the device is
detached.

Refactor the code to remove an indent level.

Always unlink the urbs when the device is detached.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: always clear the usb intfdata in (*detach)

Make sure the usb intfdata is always cleared when the device is
detached.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: move urb unlink into usbduxsigma_detach()

For aesthetics, move the final force unlink of the urbs from
usbduxsigma_free_usb_buffers() to usbduxsigma_detach().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: init 'pwm_buf_sz' in usbduxsigma_auto_attach()

Initialize this variable with then_ai_urbs and n_ao_urbs in the
attach. Then usbduxsigma_alloc_usb_buffers() can just check the
variable to determine if the urb needs to be allocated.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: 'dac_commands' does not need to be kzalloc()'d

The 'dac_commands' buffer is used to pass the ao channel list from
usbduxsigma_ao_cmd() to the urb callback, usbduxsigma_ao_urb_complete().
This buffer does not need to be allocated.

Change it into a simple array of the correct size. Rename the variable
to 'ao_chanlist' to clarify what it actually is.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_alloc_usb_buffers()

Tidy up the error path by doing all the basic allocations then checking
for failures.

We have the comedi device now so fill in the urb->context.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: return void from usbduxsigma_pwm_pattern()

This function never fails and currently returns '1' so that the
usbduxsigma_pwm_write() function returns to proper value (insn->n).

It's also called by usbduxsigma_pwm_config() which also returns the
'1' value. The proper return code for this function should be '0' to
indicate success.

Change the return type of the function to void and just have the
callers return the proper values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: return void from usbdux_pwm_pattern()

This function never fails and currently returns '1' so that the
usbdux_pwm_write() function returns to proper value (insn->n).

It's also called by usbdux_pwm_config() which also returns the '1'
value. The proper return code for this function should be '0' to
indicate success.

Change the return type of the function to void and just have the
callers return the proper values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_pwm_config()

Rename the local variable used for the private data pointer to 'devpriv'.

Tidy up the function a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove usbdux_pwm_read()

The pwm subdevice is not readable so this callback function is not
needed. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_pwm_write()

Remove the sanity check of the private data. This function can only be
called if the private data was successfully allocated in the attach.

Tidy up the function a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_pwm_pattern()

Rename the local variable used for the private data pointer to 'devpriv'.

Remove the sanity check of the private data. This function can only be
called if the private data was successfully allocated in the attach.

Tidy up the function to make it more concise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: tidy up usbdux_pwm_period()

Rename the local variable used for the private data pointer to 'devpriv'.

Fix the fx2delay calculation so it does not use floating point values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: remove the usb endpoint defines

The endpoint defines are each only used in one place and don't help
clarify the code. Remove the defines and just open code the values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: generalize the ai/ao usb_kill_urb()

Generalize a helper function to replace for() loops in usbduxsigma_{ai,ao}_stop()
that call usb_kill_urb() to unlink all the urbs.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: generalize the usb_submit_urb functions

Generalize a helper function to replace usbduxsub_submit_{in,out}urbs().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: device.h unused variables

wACKDuration
wRTSTransmitLen
byRTSServiceField
byRTSSignalField

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dead code wCTSDuration.

Always set to zero, so remove.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Fixed sparse errors

Changes:

* xillybus.h: __iomem added to struct xilly_endpoint -> registers to suppress
  "different address spaces" errors.

* xillybus_core.c: __user added as required for the same reason.

* The two member names of struct xilly_endpoint_hardware of the form
  sync_single_for_{cpu,device} were changed to something that won't look
  like the well-known functions.

* All *.c files: Variables and functions made static as required.

Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: Removed dependency on OF_DEVICE in Kconfig

This variable was removed from the kernel a while ago.

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: tidy up multi-line comments

Tidy up the multi-line comments to follow the CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove some unnecessary parentheses

These parentheses are not necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: tidy up user ai/ao range initialization

The allocation of the user range tables could fail. Make sure to check
for it.

Change the kmalloc()'s to kzalloc()'s to make sure the allocated range
tables are initialized to a known state.

Change the local variables so they can be used for both the ai and ao
range initialization and use shorter names to keep the lines < 80 chars.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove an unnecessary check in the attach

If the user does not specify the analog output range the private data
'user_ao_range_table' will not be allocated. The comedi core will detect
the NULL s->range_table and automatically set it to &range_unknown.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: fix das16_detach()

The function das16_reset() needs a valid dev->iobase. Since the iobase
is requested after the devpriv has been allocated in the attach, move
the das16_reset() call into the if (devpriv) and add a if (dev->iobase).

Also, move the release of the extra iobase into the if (devpriv) to
prevent an invalid memory access.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: change MODULE_DESCRIPTION

Change the MODULE_DESCRIPTION to something useful instead of the
generic "Comedi low-level driver".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: tidy up private data definition

Remove the comments and add some whitespace to help readability.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: cleanup comedi_error() messages

Some of these messages are missing the terminating '\n' and most of them
have the quoted string split across lines.

Change all of them to dev_err() messages and fix the issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: fix a > 80 char line issue

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: absorb das1600_mode_detect() into caller

This function is only called during the board attach to determine the
pacer clock speed for the boards capable of bursting.

Absorb it into the caller and remove the attach noise.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: cleanup printk message in board attach

Convert this printk message into a dev_err().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: fail attach if board id is incorrect

This driver probes the board id during the attach to ensure that the
user is attempting to attach to the correct board type. Currently an
error message is output if the ids are not consistent but the attach
continues anyway.

Make the attach fail if the id bits do not match. Also, cleanup the
printk messages and use a dev_err() only if the probe fails.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: tidy up the register map defines

Add the suffix _REG to all the register defines to better indicate
what they are.

Add a prefix to all the register bit defines to avoid namespace clashes
and to better indicate what they are.

Tidy up the whitesapce.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: tidy up 8255 digital i/o subdevice

The 8255 digital i/o subdevice is only available on some of the boards
supported by this driver. Currently the 'i8255_offset' member of the
boardinfo is used to indicate that it is available.

To clarify this support, add a 'has_8255' bit-field flag to the boardinfo.
We can then use this flag to conditionally allocate the space for the
subdevice only when it is needed.

Also, make sure to check that subdev_8255_init() is successful and propagate
any errors.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove 'i8254_offset' from boardinfo

All the boards supported by this driver have an 8254 timer at offset
0x0c. Remove this unused information from the boardinfo.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: move boardinfo declaration

Now that the boardinfo does not require any forward declarations,
move it near the definition of the struct.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove unnecessary test in das16_interrupt()

The timer is only started by the ai subdevice in das16_cmd_exec()
and this function can only be called if the device is attached.

Remove the unnecessary sanity check.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: move some functions to improve readability

For aesthetics, move some of the functions to make the code easier
to follow.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: tidy up das16_ai_insn_read()

Factor out the loop that waits for the ai conversion to complete.

Tidy up the function a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: introduce das16_ai_{en, dis}able() helpers

Introduce a couple helper functions to enable and disable the
analog input interrupt/dma conversions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove the register map comments

This is just extra cruft. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove unused static const variable

This variable is not used in the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove unused DAS16_SIZE

This define is not used in the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: add a 'can_burst' flag to the private data

If the boardinfo 'size' is > 0x400 it indicates that the board has
additional registers that allow bursting of analog input data.

To better indicate this add a flag to the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove 'volatile' on private data variables

As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...". The variables in the private data that are marked
volatile don't need to be. Remove the volatile.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove DEBUG_PRINT macro

This macro outputs some printk() debug info that is just added noise.
Remove it as well as the DEBUG stuff.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove reg_dump()

This function just prints some development debug information. There is
no reason to leave this in the final driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove 'ai_unipolar' and 'ai_singleended'

These members in the private data are only used during the board attach.

Move the reading of the status register to the board attach and just
check the value where needed when initializing the analog input subdevice.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove unused struct definition

This struct is not used by the driver. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: tidy up the comedi_lrange tables

Cleanup the whitespace in the tables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: cleanup analog output subdevice

All the boards supported by this driver that have analog outputs use
the same function to handle the (*insn_write) for the subdevice. They
all also have 12-bit resolution (maxdata = 0x0fff).

Remove the 'ao' and 'ao_nbits' members from the boardinfo and replace
them with a simple bit-field flag 'has_ao'.

Tidy up the subdevice init a bit as well as the (*insn_write) function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: all supported board have digital outputs

All the boards supported by this driver have digital outputs and all
of then use the same function to handle the (*insn_bits) for the
subdevice.

Remove the 'do_' member from the boardinfo and always initialize the
digital output subdevice during the board attach.

Tidy up the subdevice init a bit as well as the (*insn_bits) function.
Remove SDF_READABLE from the subdev_flags. This is a pure digital output
subdevice and the outputs are not readable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: all supported board have digital inputs

All the boards supported by this driver have digital inputs and all
of then use the same function to handle the (*insn_bits) for the
subdevice.

Remove the 'di' member from the boardinfo and always initialize the
digital input subdevice during the board attach.

Tidy up the subdevice init a bit as well as the (*insn_bits) function.
The (*insn_bits) function does not need to clear data[0].

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: change boardinfo 'ai_nbits' to 'ai_maxdata'

The subdevice functions that used this boardinfo can use the subdevice
's->maxdata' value instead. Tidy up those functions.

Change the boardinfo so that the calculation is not needed during the
attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: all supported board have analog inputs

All the boards supported by this driver have analog inputs and all
of then use the same function to handle the (*insn_read) for the
subdevice.

Remove the 'ai' member from the boardinfo and always initalize the
analog input subdevice during the board attach.

Tidy up the subdevice init a bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: fix DMA init during board attach

DMA support is optional in this driver. To enable it, the user
passes the desired DMA channel during the board attach. A timer
is then used by the driver to periodically get the analog input
data from the DMA.

Since the DMA support is optional, modify the init code so that
it only fails if the DMA channel is unavailable or the DMA buffers
can not be allocated. Don't fail just because the user passed an
invalid DMA channel (only DMA channels 1 and 3 are valid).

Remove the printk() noise about the DMA. Change the printk() when
the request_dma() fails into a dev_err().

Move the timer initialization so it's only setup if DMA is available.
It's not needed otherwise. Also, only hook up the subdevice command
support functions if DMA is available. This allows removing a couple
sanity checks in the command support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: remove DMA irq support

As noted in the driver, a timer is always used by this driver to handle
the DMA because samples could be dropped while waiting for the DMA done
interrupt.

Remove the irq setup code as well as the interrupt handler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: "timer_mode" is always used for DMA

As noted in the driver, a timer is always used by this driver to handle the
DMA due to buggy DMA controllers and the lack of a hardware fifo in some of
the supported boards.

Remove all the non-timer mode specific code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: olpc_dcon: provide detailed FB_OLPC_DCON help section

The FB_OLPC_DCON help section is to short according to checkpatch.pl.
We want more information about the controller type, its task, its video
pipeline position and so on.

There are no style issues, remove checkpatch.pl TODO entry.

Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u/ieee80211: add missing single_release()

The debug file is opened with single_open(), but there's no
single_release().

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: add missing single_release()

The debug file is opened with single_open(), but there's no
single_release().

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: depend on CONFIG_TTY

The driver uses the tty layer, so explicitly say that, to prevent
randomconfig build errors.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: reformat documentation

Reformat the high-level documentation to human readable plain text by
removing HTML and other tags.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: delete CVS keyword markers

Delete CVS keyword markers.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: convert @return

Convert "@return" to "Returns: ".

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: convert @param

Convert "@param name" inside comments to "@name:".

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: delete duplicated documentation from .h file

Delete duplicated function call documentation from the .h file. These
functions are just internal anyway, and the .h file will be completely
removed in the future when the driver will be made a single self-contained
.c file.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: delete @INTERNAL

Delete "@INTERNAL" from comments.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: reformat long comments

Reformat long comments according to multi-line comment style.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: fix whitespace issues

Fix most of the whitespace issues reported by checkpatch:
- use tabs for indentation
- brace placement vs. newlines
- (foo_t*) -> (foo_t *)
- i=0 -> i = 0

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: delete __cvmx_usb_complete_to_string()

Delete a redundant function.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: replace cvmx_le16_to_cpu with le16_to_cpu

Replace cvmx_le16_to_cpu() with le16_to_cpu().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: replace cvmx_wait_usec with udelay

Just use udelay().

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: replace long udelays with mdelays

Replace long udelays with mdelays.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: eliminate cvmx_likely/unlikely

Just use likely/unlikely.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: utilize Linux error codes

Use generic Linux error codes to replace cvmx_usb_status_t.

The conversion table:

Before After
cvmx_usb_status_t int
CVMX_USB_SUCCESS 0
CVMX_USB_INVALID_PARAM -EINVAL
CVMX_USB_NO_MEMORY -ENOMEM
CVMX_USB_BUSY -EBUSY
CVMX_USB_TIMEOUT -ETIMEDOUT
CVMX_USB_INCORRECT_MODE Deleted (was never used)

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: delete __cplusplus

Delete __cplusplus.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: delete redundant example code

Delete redundant example code found in comments. It's already there in
the driver proper.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: delete redundant debug flags

Delete redudant debug flags and dead code behind them.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: cvmx-usb: delete driver-specific tracing code

Delete call, parameter, and return value tracing.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: use correct board type for EdgeRouter Lite

Use CVMX_BOARD_TYPE_UBNT_E100 for EdgeRouter Lite.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: depend on CAVIUM_OCTEON_SOC

The USB driver should depend on SOC instead of CPU.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: LeakyBucket: Fixed a pointer asterisk placement issue

Fixed a pointer asterisk placement issue

Signed-off-by: Lilis Iskandar <veeableful@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: LeakyBucket: Fixed code indent issues

Fixed code indent issues

Signed-off-by: Lilis Iskandar <veeableful@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: LeakyBucket: Fixed C99 comments

Fixed C99 comments

Signed-off-by: Lilis Iskandar <veeableful@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: LeakyBucket: Fixed brace issues

Fixed brace issues

Signed-off-by: Lilis Iskandar <veeableful@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: LeakyBucket: Fixed spacing/tabing issues

This one fixes spacing/tabbing issues.

Signed-off-by: Lilis Iskandar <veeableful@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: re-enable the clock on resume

On resume the slave controller is reinitialized. The tegra i2c master
controller disables the clock at the end of the initialiation, propably
to save some power, and enables it again on each transfer. We don't
do this yet and also forgot to enable the clock on resume. Fix this
copy-paste error by not disabling the clock after initialization.

This didn't striked us yet because suspend/resume hasn't landed in mainline
yet, but will soon.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: Modified function name conflict set_endian

Conflict resolution for function name set_endian when building for powerpc
The name changed to gdm_set_endian

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Won Kang <wonkang@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt9812: remove duplicated include from dt9812.c

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: remove duplicated include from gdm_lte.c

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xillybus: remove duplicated include from xillybus_core.c

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix sparse warnings about use of obsolete initializer

This patch fixes a lot of sparse warnings about use of obsolete
struct and array initializer.

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix non-ANSI sparse warnings

This patch fixes a lot of non-ANSI sparse warnings by adding void to
parameterless functions.

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 3.11-rc3 into staging-next

We want these fixes here.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>