GitHub/LineageOS/android_kernel_motorola_exynos9610.git
13 years agoInput: wacom - fix touch parsing on newer Bamboos
Chris Bagwell [Fri, 9 Sep 2011 20:38:10 +0000 (13:38 -0700)]
Input: wacom - fix touch parsing on newer Bamboos

Bamboos with Product ID's > 0xD4 return values unrelated to pressure
in touch 1 pressure field.  They also report 2nd touch X/Y values
shifted down 1 byte (where pressure was).  This results in jumpy
1 finger touch and totally invalid 2nd finger data.

For touch detection, switch to a Touch Present single bit that
all versions of Bamboo support.

For touch 2 offset, calculate offset based on a bit that is set
different between the two packet layouts.

Since touch pressure reports were removed from driver, there was
no need to be reading pressure any more.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: bcm5974 - add MacBookAir4,1 trackpad support
Pieter-Augustijn Van Malleghem [Fri, 9 Sep 2011 20:29:45 +0000 (13:29 -0700)]
Input: bcm5974 - add MacBookAir4,1 trackpad support

This patch adds trackpad support for the MacBookAir4,1, released in July 2011.
It is very similar to the MacBookAir4,2 patch submitted by Joshua Dillon and
Chase Douglas.

Signed-off-by: Pieter-Augustijn Van Malleghem <p-a@scarlet.be>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - add POINTER and DIRECT device properties
Jason Gerecke [Thu, 8 Sep 2011 16:38:14 +0000 (09:38 -0700)]
Input: wacom - add POINTER and DIRECT device properties

Adds INPUT_PROP_POINTER or INPUT_PROP_DIRECT as necessary to the
hardware supported by the Wacom driver. The DIRECT property is
assigned to devices with an embedded screen (i.e. touchscreens
and display tablets). The POINTER property is assigned to those
without embedded screens.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: adp5588-keys - remove incorrect modalias
Axel Lin [Sat, 27 Aug 2011 06:37:33 +0000 (23:37 -0700)]
Input: adp5588-keys - remove incorrect modalias

For i2c drivers, we should use "i2c:" prefix for modalias.

MODULE_DEVICE_TABLE will setup the modulalias for us, thus adding
a MODULE_ALIAS is redundant (in addition to being incorrect).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: cm109 - fix checking return value of usb_control_msg
axel lin [Thu, 25 Aug 2011 16:42:09 +0000 (09:42 -0700)]
Input: cm109 - fix checking return value of usb_control_msg

If successful, usb_control_msg returns the number of bytes transferred,
otherwise a negative error number.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner
Jason Gerecke [Sat, 27 Aug 2011 06:18:22 +0000 (23:18 -0700)]
Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner

The Wacom PenPartner should advertise its stylus tip and button
in addition to the eraser tool. These are both physically
present on the hardware, and emitted from 'wacom_penpartner_irq'.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - remove pressure for touch devices
Ping Cheng [Sat, 27 Aug 2011 06:10:02 +0000 (23:10 -0700)]
Input: wacom - remove pressure for touch devices

Touch devices do not report valid pressure or capacitance.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: ad714x - read the interrupt status registers in a row
Michael Hennerich [Mon, 22 Aug 2011 16:45:42 +0000 (09:45 -0700)]
Input: ad714x - read the interrupt status registers in a row

The interrupt status registers should be read in row to avoid invalid data.

Alter "read" method for both bus options to allow reading several registers
in a row and make sure we read interrupt status registers properly.

Read sequence saves 50% of bus transactions compared to single register
reads. So use it also for the result registers, which are also located
in a row.

Also update copyright notice.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: ad714x - use DMA-safe buffers for spi_write()
Dmitry Torokhov [Mon, 22 Aug 2011 16:45:39 +0000 (09:45 -0700)]
Input: ad714x - use DMA-safe buffers for spi_write()

spi_write() requires use of DMA-safe (cacheline aligned) buffers.
Also use the same buffers when reading data since to avoid extra
locking and potential memory allocation in spi_write_then_read().

Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: ad714x - fix endianness issues
Michael Hennerich [Mon, 22 Aug 2011 04:04:12 +0000 (21:04 -0700)]
Input: ad714x - fix endianness issues

Allow driver to be used on Big Endian boxes.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: ad714xx-spi - force SPI bus into the default 8-bit mode
Michael Hennerich [Mon, 22 Aug 2011 04:04:12 +0000 (21:04 -0700)]
Input: ad714xx-spi - force SPI bus into the default 8-bit mode

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: ep93xx_keypad - add missing include of linux/module.h
Axel Lin [Sun, 21 Aug 2011 19:48:08 +0000 (12:48 -0700)]
Input: ep93xx_keypad - add missing include of linux/module.h

ep93xx_keypad.c uses interfaces from linux/module.h,
so it should include that file.  This patch fixes build errors.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: tnetv107x-ts - add missing include of linux/module.h
Axel Lin [Sun, 21 Aug 2011 19:48:04 +0000 (12:48 -0700)]
Input: tnetv107x-ts - add missing include of linux/module.h

tnetv107x-ts.c uses interfaces from linux/module.h,
so it should include that file.  This patch fixes build errors.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: max11801_ts - correct license statement
Jiejing Zhang [Sat, 20 Aug 2011 21:38:01 +0000 (14:38 -0700)]
Input: max11801_ts - correct license statement

The original license statement was confusing since it was unclear if
the license was pure GPLv2 or GPLv2+ and did not match the license
of the driver max11801_ts was derived from. The license is GPLv2+.

Signed-off-by: Jiejing Zhang <jiejing.zhang@freescale.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: atmel_mxt_ts - report pressure information from the driver
Yufeng Shen [Tue, 16 Aug 2011 07:40:54 +0000 (00:40 -0700)]
Input: atmel_mxt_ts - report pressure information from the driver

Atmel mxt1386 touch controller has the touch pressure information so
let's report it to the user space.

[dtor@mail.ru: added ABS_RESSURE reporting for ST emulation.]

Signed-off-by: Yufeng Shen <miletus@chromium.org>
Acked-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: bcm5974 - Add support for newer MacBookPro8,2
Andrew Drake [Tue, 16 Aug 2011 18:07:39 +0000 (11:07 -0700)]
Input: bcm5974 - Add support for newer MacBookPro8,2

New MacBook Pro devices reporting product name MacBookPro8,2 come with
newer/higher resolution touchpads than others with the same product
name with USB ID 05ac:0252. This patch adds support for these devices.

Signed-off-by: Andrew Drake <adrake@adrake.org>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - report id 3 returns 4 bytes of data
Ping Cheng [Tue, 16 Aug 2011 07:17:57 +0000 (00:17 -0700)]
Input: wacom - report id 3 returns 4 bytes of data

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - add WAC_MSG_RETRIES define
Ping Cheng [Tue, 16 Aug 2011 07:17:56 +0000 (00:17 -0700)]
Input: wacom - add WAC_MSG_RETRIES define

Use WAC_MSG_RETRIES define instead of a numeric constant.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)
Gerard Braad [Tue, 16 Aug 2011 07:17:56 +0000 (00:17 -0700)]
Input: wacom - add support for the Wacom Bamboo Pen (CTL-660/K)

Signed-off-by: Gerard Braad <me@gbraad.nl>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: tegra-kbc - correct call to input_free_device
Axel Lin [Thu, 11 Aug 2011 16:22:45 +0000 (09:22 -0700)]
Input: tegra-kbc - correct call to input_free_device

If kzalloc for kbc fails, then we have NULL pointer dereference while
calling input_free_device(kbc->idev) in the error handling.
So it is safer to always use the original name, input_dev.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: mpu3050 - correct call to input_free_device
Axel Lin [Thu, 11 Aug 2011 16:19:29 +0000 (09:19 -0700)]
Input: mpu3050 - correct call to input_free_device

input_free_device() should be used if input_register_device() was not called
yet or if it failed.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: bcm5974 - add support for touchpads found in MacBookAir4,2
Joshua V. Dillon [Tue, 9 Aug 2011 06:45:14 +0000 (23:45 -0700)]
Input: bcm5974 - add support for touchpads found in MacBookAir4,2

Added USB device IDs for MacBookAir4,2 trackpad. Device constants were
copied from the MacBookAir3,2 constants. The 4,2 device specification is
reportedly unchanged from the 3,2 predecessor and seems to work well.

Signed-off-by: Joshua V Dillon <jvdillon@gmail.com>
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: mma8450 - fix module device table type
Axel Lin [Tue, 9 Aug 2011 06:39:59 +0000 (23:39 -0700)]
Input: mma8450 - fix module device table type

The module device table for of_device_id should use "of" type.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: remove CLOCK_TICK_RATE from analog joystick driver
Deepak Saxena [Fri, 5 Aug 2011 06:39:58 +0000 (23:39 -0700)]
Input: remove CLOCK_TICK_RATE from analog joystick driver

The analog joystick driver is written for x86 systems. This
patch updates it to use the PIT_TICK_RATE value instead of
CLOCK_TICK_RATE as they are equivalent on x86 and we want to
deprecate the latter.

Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: ad7879 - fix deficient device disable
Michael Hennerich [Tue, 2 Aug 2011 22:41:37 +0000 (15:41 -0700)]
Input: ad7879 - fix deficient device disable

Input close or device disable should not interact with the exported
gpiolib functionality. However that's the case. __ad7879_disable()
clears the entire AD7879_REG_CTRL2, while it should just power down
the ADC and its reference.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: gpio_keys - fix two typos in devicetree documentation
Tobias Klauser [Tue, 2 Aug 2011 22:40:22 +0000 (15:40 -0700)]
Input: gpio_keys - fix two typos in devicetree documentation

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: mma8450 - add device tree probe support
Shawn Guo [Mon, 1 Aug 2011 02:56:10 +0000 (19:56 -0700)]
Input: mma8450 - add device tree probe support

It adds device tree probe support for mma8450 driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Eric Miao <eric.miao@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: gpio_keys - return proper error code if memory allocation fails
Tobias Klauser [Sat, 30 Jul 2011 19:08:10 +0000 (12:08 -0700)]
Input: gpio_keys - return proper error code if memory allocation fails

Return -ENOMEM if kzalloc fails in gpio_keys_get_devtree_pdata().

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: lm8323 - add missing device_remove_file for dev_attr_time
Axel Lin [Sat, 30 Jul 2011 19:05:13 +0000 (12:05 -0700)]
Input: lm8323 - add missing device_remove_file for dev_attr_time

Add missing device_remove_file() for dev_attr_time in lm8323_remove().
Also calling device_remove_file() in lm8323_probe() error path to
remove sysfs attribute file.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: tegra-kbc - fix computation of polling time
Rakesh Iyer [Sat, 30 Jul 2011 19:01:48 +0000 (12:01 -0700)]
Input: tegra-kbc - fix computation of polling time

Fix a constant definition and computation of polling time.

[dtor@mail.ru: switched to using DIV_ROUND_UP as was suggested by
 Thierry Reding <thierry.reding@avionic-design.de>]

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: kxtj9 - explicitly include module.h
Stephen Rothwell [Sat, 30 Jul 2011 18:55:38 +0000 (11:55 -0700)]
Input: kxtj9 - explicitly include module.h

We need to explicitly include module.h since some of its facilities
are used.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: psmouse - hgpk.c needs module.h
Randy Dunlap [Sat, 30 Jul 2011 18:53:47 +0000 (11:53 -0700)]
Input: psmouse - hgpk.c needs module.h

hgpk.c uses interfaces from linux/module.h, so it should include that file.
This fixes build errors.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoMerge branch 'next' into for-linus
Dmitry Torokhov [Wed, 27 Jul 2011 07:54:47 +0000 (00:54 -0700)]
Merge branch 'next' into for-linus

13 years agoInput: synaptics - fix reporting of min coordinates
Dmitry Torokhov [Mon, 25 Jul 2011 08:36:46 +0000 (01:36 -0700)]
Input: synaptics - fix reporting of min coordinates

We were testing wrong bit in the extended capability query.

Reported-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: tegra-kbc - enable key autorepeat
Rakesh Iyer [Mon, 25 Jul 2011 07:49:55 +0000 (00:49 -0700)]
Input: tegra-kbc - enable key autorepeat

To support key repeats, keyboard needs to be setup as an autorepeating
device.

Signed-off-by: Rakesh Iyer <riyer@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: kxtj9 - fix locking typo in kxtj9_set_poll()
Dan Carpenter [Wed, 20 Jul 2011 06:16:29 +0000 (23:16 -0700)]
Input: kxtj9 - fix locking typo in kxtj9_set_poll()

According to the comments we want to call mutex_lock() here instead
of mutex_unlock().  That makes more sense.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: kxtj9 - fix bug in probe()
Dan Carpenter [Wed, 20 Jul 2011 06:12:21 +0000 (23:12 -0700)]
Input: kxtj9 - fix bug in probe()

We are testing the wrong variable here.  I believe tj9->input_dev
is always NULL at this point, so probe() will fail.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: intel-mid-touch - remove pointless checking for variable 'found'
Axel Lin [Tue, 19 Jul 2011 00:09:05 +0000 (17:09 -0700)]
Input: intel-mid-touch - remove pointless checking for variable 'found'

The implementation does break from the for loop after we assign 'i' to
variable 'found'.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: hp_sdc - staticize hp_sdc_kicker()
Axel Lin [Tue, 19 Jul 2011 00:09:46 +0000 (17:09 -0700)]
Input: hp_sdc - staticize hp_sdc_kicker()

It's not referenced outside this file so there's no need for it to be in
the global name space.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: pmic8xxx-keypad - fix a leak of the IRQ during init failure
Axel Lin [Tue, 19 Jul 2011 00:09:22 +0000 (17:09 -0700)]
Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure

Make sure we are passing the same cookie in all calls to
request_any_context_irq() and free_irq().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: cy8ctmg110_ts - set reset_pin and irq_pin from platform data
Axel Lin [Tue, 19 Jul 2011 00:09:37 +0000 (17:09 -0700)]
Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data

The implementation in cy8ctmg110_probe() does not properly set reset_pin
and irq_pin from platform data. Let's fix it.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: cy8ctmg110_ts - constify i2c_device_id table
Axel Lin [Wed, 13 Jul 2011 07:04:36 +0000 (00:04 -0700)]
Input: cy8ctmg110_ts - constify i2c_device_id table

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: cy8ctmg110_ts - fix checking return value of i2c_master_send
Axel Lin [Wed, 13 Jul 2011 07:03:36 +0000 (00:03 -0700)]
Input: cy8ctmg110_ts - fix checking return value of i2c_master_send

i2c_master_send returns negative errno, or else the number of bytes written.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: lifebook - make dmi callback functions return 1
Axel Lin [Wed, 13 Jul 2011 07:02:21 +0000 (00:02 -0700)]
Input: lifebook - make dmi callback functions return 1

We only care about if there is a successful match from the table (or
no match at all), so let's make dmi_check_system return immediately
instead of iterating thorough the whole table.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: atkbd - make dmi callback functions return 1
Axel Lin [Wed, 13 Jul 2011 06:59:41 +0000 (23:59 -0700)]
Input: atkbd - make dmi callback functions return 1

We only care about if there is a successful match from the table (or
no match at all), so let's make dmi_check_system return immediately
instead of iterating thorough the whole table.

Make the dmi callback function return 1 then dmi_check_system
will return immediately if we have a successful match.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: gpio_keys - switch to using SIMPLE_DEV_PM_OPS
Dmitry Torokhov [Sat, 9 Jul 2011 19:41:46 +0000 (12:41 -0700)]
Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS

This reduces amount #ifdeds in the code.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: gpio_keys - add support for device-tree platform data
David Jander [Sat, 9 Jul 2011 19:41:46 +0000 (12:41 -0700)]
Input: gpio_keys - add support for device-tree platform data

This patch enables fetching configuration data, which is normally provided
via platform_data, from the device-tree instead.

If the device is configured from device-tree data, the platform_data struct
is not used, and button data needs to be allocated dynamically. Big part of
this patch deals with confining pdata usage to the probe function, to make
this possible.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: aiptek - remove double define
Edwin van Vliet [Sun, 10 Jul 2011 23:07:28 +0000 (16:07 -0700)]
Input: aiptek - remove double define

Constant AIPTEK_TOOL_BUTTON_PEN_MODE was defined twice.

Signed-off-by: Edwin van Vliet <edwin@cheatah.nl>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: synaptics - set minimum coordinates as reported by firmware
Dmitry Torokhov [Sat, 9 Jul 2011 19:32:56 +0000 (12:32 -0700)]
Input: synaptics - set minimum coordinates as reported by firmware

Newer Synaptics firmware allows to query minimum coordinates reported by
the device, let's use this data.

Acked-by: Chase Douglas <chase.douglas@canonical.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: synaptics - process button bits in AGM packets
Daniel Kurtz [Thu, 7 Jul 2011 05:57:39 +0000 (22:57 -0700)]
Input: synaptics - process button bits in AGM packets

AGM packets contain valid button bits, too.
This patch refactors packet processing to parse button bits in AGM packets.
However, they aren't actually used or reported.

The point is to more completely process AGM packets,
and prepare for future patches that may actually use AGM packet button bits.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: synaptics - rename set_slot to be more descriptive
Daniel Kurtz [Thu, 7 Jul 2011 05:42:52 +0000 (22:42 -0700)]
Input: synaptics - rename set_slot to be more descriptive

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: synaptics - fuzz position for touchpad with reduced filtering
Daniel Kurtz [Thu, 7 Jul 2011 05:39:14 +0000 (22:39 -0700)]
Input: synaptics - fuzz position for touchpad with reduced filtering

Synaptics touchpads indicate via a capability bit when they perform reduced
filtering on position data. In such a case, use a non-zero fuzz value.
Fuzz = 8 was chosen empirically by observing the raw position data
reported by a clickpad indicating it had reduced filtering.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: synaptics - set resolution for MT_POSITION_X/Y axes
Daniel Kurtz [Thu, 7 Jul 2011 05:27:47 +0000 (22:27 -0700)]
Input: synaptics - set resolution for MT_POSITION_X/Y axes

Set resolution for MT_POSITION_X and MT_POSITION_Y to match ABS_X and
ABS_Y, respectively.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - cleanup a return value for the old Bamboo
Ping Cheng [Thu, 7 Jul 2011 01:05:43 +0000 (18:05 -0700)]
Input: wacom - cleanup a return value for the old Bamboo

The old code may call input_sync() without sending any other events.
While it will be suppressed by the input core not calling it at all
is still cheaper.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - update Graphire4 and old Bamboo tablet buttons
Ping Cheng [Thu, 7 Jul 2011 01:05:42 +0000 (18:05 -0700)]
Input: wacom - update Graphire4 and old Bamboo tablet buttons

Bamboo touch sets BTN_BACK, BTN_FORWARD, BTN_LEFT, and BTN_RIGHT
as the default button events for tablet buttons. Change Graphire4
and old Bamboo to the same settings.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - add serial number for Graphire4 and old Bamboo
Ping Cheng [Thu, 7 Jul 2011 01:05:41 +0000 (18:05 -0700)]
Input: wacom - add serial number for Graphire4 and old Bamboo

With the removal of BTN_TOOL_FINGER for tablet buttons and
expresskeys, serial number is needed to distingush if the
events were from a regular tool (stylus, eraser, or mouse)
or the attribures (buttons, strips, or wheels) on the tablet
since there are overlapped events between the tools and the
tablet attributes.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - remove BTN_TOOL_FINGER for pad
Ping Cheng [Thu, 7 Jul 2011 01:05:41 +0000 (18:05 -0700)]
Input: wacom - remove BTN_TOOL_FINGER for pad

BTN_TOOL_FINGER was designed to indicate a single finger touch.
Remove the lines that borrowed this type for expresskeys and
tablet buttons.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: add support for Kionix KXTJ9 accelerometer
Chris Hudson [Thu, 7 Jul 2011 01:36:51 +0000 (18:36 -0700)]
Input: add support for Kionix KXTJ9 accelerometer

Signed-off-by: Chris Hudson <chudson@kionix.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: add guarding parentheses to macros
Simon Budig [Tue, 5 Jul 2011 02:56:01 +0000 (19:56 -0700)]
Input: add guarding parentheses to macros

Put parentheses around macro argument uses. This avoids pitfalls
for the programmer, where the argument expansion does not give the
expected result, for example:

ioctl (fd, EVIOCGABS (have_mt ? ABS_MT_POSITION_X : ABS_X), &abs);

Signed-off-by: Simon Budig <simon.budig@kernelconcepts.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wm97xx - mark channels which need pen_down
Wolfram Sang [Tue, 5 Jul 2011 02:22:01 +0000 (19:22 -0700)]
Input: wm97xx - mark channels which need pen_down

Currently, battery drivers also use poll_sample() provided by the
wm97xx-core but this code always checks if the pen is down. Mark the
channels which really need this (i.e. for the touchscreen) with the
PEN_DOWN bit, and skip the checks otherwise. Now, the battery channels
can always be read.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wm97xx - refactor channel selection in poll_sample()
Wolfram Sang [Tue, 5 Jul 2011 02:22:00 +0000 (19:22 -0700)]
Input: wm97xx - refactor channel selection in poll_sample()

The current implementation of poll_sample() has the problem that one of
its arguments, the channel to be selected, differs from wm9713 to other
variants. This parameter gets passed to the (currently unused)
mach-specific functions pre_sample() and post_sample() which thus have
to deal with codec-specific differences. Refactor the routine so that
the argument to poll_sample() is generic for all codecs and do necessary
conversions only in the codec-specific driver. The outcome even uses
less code and removes the non-standard use of the PEN_DOWN bit to mark
the AUX-channels.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wm97xx - remove redundant define
Wolfram Sang [Tue, 5 Jul 2011 02:22:00 +0000 (19:22 -0700)]
Input: wm97xx - remove redundant define

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: xen-kbdfront - enable driver for HVM guests
Stefano Stabellini [Tue, 5 Jul 2011 02:22:00 +0000 (19:22 -0700)]
Input: xen-kbdfront - enable driver for HVM guests

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: xpad - enable rumble support for XBox360 Wireless Controllers
Chris Moeller [Tue, 5 Jul 2011 02:21:59 +0000 (19:21 -0700)]
Input: xpad - enable rumble support for XBox360 Wireless Controllers

This patch implements rumble support for XBox360 Wireless Controllers.

Signed-off-by: Chris Moeller <kode54@gmail.c>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: sh_keysc - fix compile warning
Dmitry Torokhov [Mon, 4 Jul 2011 13:34:48 +0000 (06:34 -0700)]
Input: sh_keysc - fix compile warning

The "#if" above should really be an "#ifdef" to avoid this warning:

  CC      drivers/input/keyboard/sh_keysc.o
drivers/input/keyboard/sh_keysc.c:294:5: warning: "CONFIG_PM_SLEEP" is
not defined

Reported-by: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: atmel_mxt_ts - handle objects with multiple instances correctly
Iiro Valkonen [Mon, 4 Jul 2011 10:16:25 +0000 (03:16 -0700)]
Input: atmel_mxt_ts - handle objects with multiple instances correctly

Handle the objects with multiple instances correctly when the configuration
data is loaded.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: atmel_mxt_ts - update object list
Iiro Valkonen [Mon, 4 Jul 2011 10:08:25 +0000 (03:08 -0700)]
Input: atmel_mxt_ts - update object list

Update the object list to include new objects, and add unique identifiers
so we can distinguish between old & new generation of the same object.

Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: mpr121 - improve sensibility of touch key
Jiejing Zhang [Wed, 29 Jun 2011 08:28:21 +0000 (01:28 -0700)]
Input: mpr121 - improve sensibility of touch key

The Quick Charge bit in Electrode conf register should be set in init
function. This bit was missed in chip's document, which may cause touch
controller charge too slow to generate an interrupt.

Also, adjust the default vlaue of touch and release threshold
to make touch key more sensitive, this fix touch may not sensitive
after setup with plastic case.

Signed-off-by: Jiejing Zhang <jiejing.zhang@freescale.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: add a driver to support InvenSense mpu3050 gyroscope chip
Joseph Lai [Mon, 27 Jun 2011 20:26:53 +0000 (13:26 -0700)]
Input: add a driver to support InvenSense mpu3050 gyroscope chip

This driver is registered as an input device. An IRQ is required in this
basic driver configuration.

Signed-off-by: Joseph Lai <joseph_lai@wistron.com>
[Cleaned up PM_RUNTIME defines]
Signed-off-by: Alan Cox <alan@linux.intel.com>
[dtor@mail.ru: consolidated PM methods, some code rearrangement]
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: update author email for gpio_mouse, at32psif, and atmel-wm97xx
Hans-Christian Egtvedt [Wed, 29 Jun 2011 07:13:26 +0000 (00:13 -0700)]
Input: update author email for gpio_mouse, at32psif, and atmel-wm97xx

This patch updates the email address of the gpio_mouse, at32psif, and
atmel-wm97xx drivers supported by me to an email account I will use on a more
regular basis in the future.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: gpio_keys - fix a memory leak
Axel Lin [Tue, 28 Jun 2011 21:23:30 +0000 (14:23 -0700)]
Input: gpio_keys - fix a memory leak

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: ads7846 - cleanup GPIO initialization
Igor Grinberg [Mon, 27 Jun 2011 20:06:27 +0000 (13:06 -0700)]
Input: ads7846 - cleanup GPIO initialization

Use gpio_request_one() instead of multiple gpiolib calls.
This also simplifies error handling a bit.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - add 3 new models - 6A, 6B, and 97
Ping Cheng [Mon, 27 Jun 2011 19:57:58 +0000 (12:57 -0700)]
Input: wacom - add 3 new models - 6A, 6B, and 97

Tested-by: Alex Tervoort <alex.tervoort@gmail.com> for 6A
Signed-off-by: David Foley <favux.is@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - Wacom Bamboo Pen D4 has 1024 pressure levels
Ping Cheng [Mon, 27 Jun 2011 19:57:58 +0000 (12:57 -0700)]
Input: wacom - Wacom Bamboo Pen D4 has 1024 pressure levels

D4 has 1024, not 512, pressure levels.

Reported-by: David Foley <favux.is@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: gpio_keys - move to late_initcall
David Jander [Thu, 23 Jun 2011 08:30:09 +0000 (01:30 -0700)]
Input: gpio_keys - move to late_initcall

Initialize gpio_keys driver at late_initcall level, to give it a chance to
work with GPIO expanders that might not be ready yet if we initialize the
driver at module_init time.

This is strictly a band-aid until there is a better way to specify
inter-device dependencies.

Signed-off-by: David Jander <david@protonic.nl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: tnetv107x-ts - fix MODULE_ALIAS
Axel Lin [Mon, 27 Jun 2011 19:42:12 +0000 (12:42 -0700)]
Input: tnetv107x-ts - fix MODULE_ALIAS

Remove the space between "platform:" prefix and the driver name.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: tnetv107x-keypad - fix MODULE_ALIAS
Axel Lin [Mon, 27 Jun 2011 19:38:43 +0000 (12:38 -0700)]
Input: tnetv107x-keypad - fix MODULE_ALIAS

Remove the space between "platform:" prefix and the driver name.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: remove unneeded version.h includes
Jesper Juhl [Mon, 27 Jun 2011 18:59:43 +0000 (11:59 -0700)]
Input: remove unneeded version.h includes

It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/input/.
This patch removes them.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: add support for mma8450 accelerometer
Eric Miao [Wed, 22 Jun 2011 08:02:50 +0000 (01:02 -0700)]
Input: add support for mma8450 accelerometer

Signed-off-by: Sammy He <r62914@freescale.com>
Signed-off-by: Eric Miao <eric.miao@linaro.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - use only one interface with DTU-2231
Aristeu Rozanski [Wed, 22 Jun 2011 08:17:17 +0000 (01:17 -0700)]
Input: wacom - use only one interface with DTU-2231

The Wacom DTU-2231 tablet has two interfaces on its default configuration
and both have HID class, leading to the creation of two input devices
instead of one. Only the first one is used, so filter out the second.

Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: wacom - Cintiq 21UX2 does not have menu strips
Ping Cheng [Wed, 22 Jun 2011 08:02:51 +0000 (01:02 -0700)]
Input: wacom - Cintiq 21UX2 does not have menu strips

So don't set ABS_RX/ABS_RY for them.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: xpad - add support for two more dance pads and a guitar
Magnus Hörlin [Tue, 21 Jun 2011 21:40:30 +0000 (14:40 -0700)]
Input: xpad - add support for two more dance pads and a guitar

Signed-off-by: Magnus Hörlin <magnus@alefors.se>
Reviewed-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: gpio_keys - switch to using threaded IRQs
David Jander [Tue, 21 Jun 2011 21:26:18 +0000 (14:26 -0700)]
Input: gpio_keys - switch to using threaded IRQs

Use a threaded interrupt handler in order to permit the handler to use
a GPIO driver that causes things like I2C transactions being done inside
the handler context.

Signed-off-by: David Jander <david@protonic.nl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: lm8323 - use oneshot level triggered interrupts
Leigh Brown [Tue, 21 Jun 2011 11:25:21 +0000 (04:25 -0700)]
Input: lm8323 - use oneshot level triggered interrupts

According to the data sheet the interrupt should be level rather than
edge triggered.  This fixes the issue of the Nokia N810 keypad stopping
responding if multiple key events occur in quick succession.

Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: lm8323 - convert to threaded IRQ
Felipe Balbi [Tue, 21 Jun 2011 11:20:57 +0000 (04:20 -0700)]
Input: lm8323 - convert to threaded IRQ

There's no need for that workqueue anymore. Get rid of it and move to
threaded IRQs instead.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: qt1070 - remove obsolete cleanup for clientdata
Wolfram Sang [Tue, 21 Jun 2011 11:20:57 +0000 (04:20 -0700)]
Input: qt1070 - remove obsolete cleanup for clientdata

A few new i2c-drivers came into the kernel which clear the clientdata
pointer on exit or error. This is not required anymore since the core
will do it for us.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoLinux 3.0-rc4
Linus Torvalds [Tue, 21 Jun 2011 03:25:46 +0000 (20:25 -0700)]
Linux 3.0-rc4

13 years agovfs: i_state needs to be 'unsigned long' for now
Linus Torvalds [Tue, 21 Jun 2011 03:13:49 +0000 (20:13 -0700)]
vfs: i_state needs to be 'unsigned long' for now

Commit 13e12d14e2dc ("vfs: reorganize 'struct inode' layout a bit")
moved things around a bit changed i_state to be unsigned int instead of
unsigned long.  That was to help structure layout for the 64-bit case,
and shrink 'struct inode' a bit (admittedly that only happened when
spinlock debugging was on and i_flags didn't pack with i_lock).

However, Meelis Roos reports that this results in unaligned exceptions
on sprc, and it turns out that the bit-locking primitives that we use
for the I_NEW bit want to use the bitops.  Which want 'unsigned long',
not 'unsigned int'.

We really should fix the bit locking code to not have that kind of
requirement, but that's a much bigger change.  So for now, revert that
field back to 'unsigned long' (but keep the other re-ordering changes
from the commit that caused this).

Andi points out that we have played games with this in 'struct page', so
it's solvable with other hacks too, but since right now the struct inode
size advantage only happens with some rare config options, it's not
worth fighting.

It _would_ be worth fixing the bitlocking code, though.  Especially
since there is no type safety in the bitlocking code (this never caused
any warnings, and worked fine on x86-64, because the bitlocks take a
'void *' and x86-64 doesn't care that deeply about alignment).  So it's
currently a very easy problem to trigger by mistake and never notice.

Reported-by: Meelis Roos <mroos@linux.ee>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Tue, 21 Jun 2011 03:12:48 +0000 (20:12 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms/r6xx+: voltage fixes
  drm/nouveau: drop leftover debugging
  drm/radeon: avoid warnings from r600/eg irq handlers on powered off card.
  drm/radeon/kms: add missing param for dce3.2 DP transmitter setup
  drm/radeon/kms/atom: fix duallink on some early DCE3.2 cards
  drm/nouveau: fix assumption that semaphore dmaobj is valid in x-chan sync
  drm/nv50/disp: fix gamma with page flipping overlay turned on
  drm/nouveau/pm: Prevent overflow in nouveau_perf_init()
  drm/nouveau: fix big-endian switch

13 years agoMerge branch 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm
Linus Torvalds [Tue, 21 Jun 2011 03:11:34 +0000 (20:11 -0700)]
Merge branch 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm

* 'msm-fix' of git://codeaurora.org/quic/kernel/davidb/linux-msm:
  msm: timer: Fix DGT rate on 8960 and 8660
  msm: timer: compensate for timer shift in msm_read_timer_count
  msm: timer: Fix SMP build error

13 years agoMerge branch 'for-2.6.40' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Tue, 21 Jun 2011 03:10:52 +0000 (20:10 -0700)]
Merge branch 'for-2.6.40' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux:
  nfsd4: fix break_lease flags on nfsd open
  nfsd: link returns nfserr_delay when breaking lease
  nfsd: v4 support requires CRYPTO
  nfsd: fix dependency of nfsd on auth_rpcgss

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 21 Jun 2011 03:10:18 +0000 (20:10 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  pxa168_eth: fix race in transmit path.
  ipv4, ping: Remove duplicate icmp.h include
  netxen: fix race in skb->len access
  sgi-xp: fix a use after free
  hp100: fix an skb->len race
  netpoll: copy dev name of slaves to struct netpoll
  ipv4: fix multicast losses
  r8169: fix static initializers.
  inet_diag: fix inet_diag_bc_audit()
  gigaset: call module_put before restart of if_open()
  farsync: add module_put to error path in fst_open()
  net: rfs: enable RFS before first data packet is received
  fs_enet: fix freescale FCC ethernet dp buffer alignment
  netdev: bfin_mac: fix memory leak when freeing dma descriptors
  vlan: don't call ndo_vlan_rx_register on hardware that doesn't have vlan support
  caif: Bugfix - XOFF removed channel from caif-mux
  tun: teach the tun/tap driver to support netpoll
  dp83640: drop PHY status frames in the driver.
  dp83640: fix phy status frame event parsing
  phylib: Allow BCM63XX PHY to be selected only on BCM63XX.
  ...

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Tue, 21 Jun 2011 03:09:15 +0000 (20:09 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  devcgroup_inode_permission: take "is it a device node" checks to inlined wrapper
  fix comment in generic_permission()
  kill obsolete comment for follow_down()
  proc_sys_permission() is OK in RCU mode
  reiserfs_permission() doesn't need to bail out in RCU mode
  proc_fd_permission() is doesn't need to bail out in RCU mode
  nilfs2_permission() doesn't need to bail out in RCU mode
  logfs doesn't need ->permission() at all
  coda_ioctl_permission() is safe in RCU mode
  cifs_permission() doesn't need to bail out in RCU mode
  bad_inode_permission() is safe from RCU mode
  ubifs: dereferencing an ERR_PTR in ubifs_mount()

13 years agodrm/radeon/kms/r6xx+: voltage fixes
Alex Deucher [Mon, 20 Jun 2011 17:00:31 +0000 (13:00 -0400)]
drm/radeon/kms/r6xx+: voltage fixes

0xff01 is not an actual voltage value, but a flag
for the driver.  If the power state as that value,
skip setting the voltage.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agomsm: timer: Fix DGT rate on 8960 and 8660
Stephen Boyd [Thu, 21 Apr 2011 23:09:11 +0000 (23:09 +0000)]
msm: timer: Fix DGT rate on 8960 and 8660

The DGT runs at 27 MHz divided by 4 on 8660 and 8960.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
13 years agopxa168_eth: fix race in transmit path.
Richard Cochran [Sun, 19 Jun 2011 21:48:06 +0000 (21:48 +0000)]
pxa168_eth: fix race in transmit path.

Because the socket buffer is freed in the completion interrupt, it is not
safe to access it after submitting it to the hardware.

Cc: stable@kernel.org
Cc: Sachin Sanap <ssanap@marvell.com>
Cc: Zhangfei Gao <zgao6@marvell.com>
Cc: Philip Rakity <prakity@marvell.com>
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv4, ping: Remove duplicate icmp.h include
Jesper Juhl [Sun, 19 Jun 2011 22:31:20 +0000 (22:31 +0000)]
ipv4, ping: Remove duplicate icmp.h include

Remove the duplicate inclusion of net/icmp.h from net/ipv4/ping.c

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetxen: fix race in skb->len access
Eric Dumazet [Sun, 19 Jun 2011 20:26:15 +0000 (20:26 +0000)]
netxen: fix race in skb->len access

As soon as skb is given to hardware, TX completion can free skb under
us.
Therefore, we should update dev stats before kicking the device.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 20 Jun 2011 16:01:33 +0000 (09:01 -0700)]
Merge branch 'stable/bug.fixes' of git://git./linux/kernel/git/konrad/xen

* 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/setup: Fix for incorrect xen_extra_mem_start.
  xen: When calling power_off, don't call the halt function.
  xen: Fix compile warning when CONFIG_SMP is not defined.
  xen: support CONFIG_MAXSMP
  xen: partially revert "xen: set max_pfn_mapped to the last pfn mapped"

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 20 Jun 2011 15:59:46 +0000 (08:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sh_keysc - 8x8 MODE_6 fix
  Input: omap-keypad - add missing input_sync()
  Input: evdev - try to wake up readers only if we have full packet
  Input: properly assign return value of clamp() macro.