GitHub/exynos8895/android_kernel_samsung_universal8895.git
10 years agovxlan: keep original skb ownership
Eric Dumazet [Mon, 6 Jan 2014 17:54:31 +0000 (09:54 -0800)]
vxlan: keep original skb ownership

Sathya Perla posted a patch trying to address following problem :

<quote>
 The vxlan driver sets itself as the socket owner for all the TX flows
 it encapsulates (using vxlan_set_owner()) and assigns it's own skb
 destructor. This causes all tunneled traffic to land up on only one TXQ
 as all encapsulated skbs refer to the vxlan socket and not the original
 socket.  Also, the vxlan skb destructor breaks some functionality for
 tunneled traffic like wmem accounting and as TCP small queues and
 FQ/pacing packet scheduler.
</quote>

I reworked Sathya patch and added some explanations.

vxlan_xmit() can avoid one skb_clone()/dev_kfree_skb() pair
and gain better drop monitor accuracy, by calling kfree_skb() when
appropriate.

The UDP socket used by vxlan to perform encapsulation of xmit packets
do not need to be alive while packets leave vxlan code. Its better
to keep original socket ownership to get proper feedback from qdisc and
NIC layers.

We use skb->sk to

A) control amount of bytes/packets queued on behalf of a socket, but
prior vxlan code did the skb->sk transfert without any limit/control
on vxlan socket sk_sndbuf.

B) security purposes (as selinux) or netfilter uses, and I do not think
anything is prepared to handle vxlan stacked case in this area.

By not changing ownership, vxlan tunnels behave like other tunnels.
As Stephen mentioned, we might do the same change in L2TP.

Reported-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agotcp: out_of_order_queue do not use its lock
Eric Dumazet [Mon, 6 Jan 2014 17:36:12 +0000 (09:36 -0800)]
tcp: out_of_order_queue do not use its lock

TCP out_of_order_queue lock is not used, as queue manipulation
happens with socket lock held and we therefore use the lockless
skb queue routines (as __skb_queue_head())

We can use __skb_queue_head_init() instead of skb_queue_head_init()
to make this more consistent.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: fix kstrtou8() return value verification in num_peer_notif
Veaceslav Falico [Mon, 6 Jan 2014 10:54:40 +0000 (11:54 +0100)]
bonding: fix kstrtou8() return value verification in num_peer_notif

It returns 0 in case of success, !0 error otherwise. Fix the improper error
verification.

Fixes: 2c9839c143bbc ("bonding: add num_grat_arp attribute netlink support")
CC: sfeldma@cumulusnetworks.com
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agor8152: replace the return value of rtl_ops_init
hayeswang [Mon, 6 Jan 2014 09:08:43 +0000 (17:08 +0800)]
r8152: replace the return value of rtl_ops_init

Replace the boolean value with the error code for the return value
of the rtl_ops_init().

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agor8152: move the actions of saving the information of the device
hayeswang [Mon, 6 Jan 2014 09:08:42 +0000 (17:08 +0800)]
r8152: move the actions of saving the information of the device

Some information of the device may be used in other functions. Move
the relative code to make sure it would be initialzed correctly
before using it.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agor8152: replace some tabs with spaces
hayeswang [Mon, 6 Jan 2014 09:08:41 +0000 (17:08 +0800)]
r8152: replace some tabs with spaces

Replace the tabs of the variables declaration with the spaces.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: pkt_sched: PIE AQM scheme
Vijay Subramanian [Sun, 5 Jan 2014 01:33:55 +0000 (17:33 -0800)]
net: pkt_sched: PIE AQM scheme

Proportional Integral controller Enhanced (PIE) is a scheduler to address the
bufferbloat problem.

>From the IETF draft below:
" Bufferbloat is a phenomenon where excess buffers in the network cause high
latency and jitter. As more and more interactive applications (e.g. voice over
IP, real time video streaming and financial transactions) run in the Internet,
high latency and jitter degrade application performance. There is a pressing
need to design intelligent queue management schemes that can control latency and
jitter; and hence provide desirable quality of service to users.

We present here a lightweight design, PIE(Proportional Integral controller
Enhanced) that can effectively control the average queueing latency to a target
value. Simulation results, theoretical analysis and Linux testbed results have
shown that PIE can ensure low latency and achieve high link utilization under
various congestion situations. The design does not require per-packet
timestamp, so it incurs very small overhead and is simple enough to implement
in both hardware and software.  "

Many thanks to Dave Taht for extensive feedback, reviews, testing and
suggestions. Thanks also to Stephen Hemminger and Eric Dumazet for reviews and
suggestions.  Naeem Khademi and Dave Taht independently contributed to ECN
support.

For more information, please see technical paper about PIE in the IEEE
Conference on High Performance Switching and Routing 2013. A copy of the paper
can be found at ftp://ftpeng.cisco.com/pie/.

Please also refer to the IETF draft submission at
http://tools.ietf.org/html/draft-pan-tsvwg-pie-00

All relevant code, documents and test scripts and results can be found at
ftp://ftpeng.cisco.com/pie/.

For problems with the iproute2/tc or Linux kernel code, please contact Vijay
Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu
(mysuryan@cisco.com)

Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Mythili Prabhu <mysuryan@cisco.com>
CC: Dave Taht <dave.taht@bufferbloat.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonetfilter: Fix build failure in nfnetlink_queue_core.c.
David S. Miller [Mon, 6 Jan 2014 18:36:06 +0000 (13:36 -0500)]
netfilter: Fix build failure in nfnetlink_queue_core.c.

net/netfilter/nfnetlink_queue_core.c: In function 'nfqnl_put_sk_uidgid':
net/netfilter/nfnetlink_queue_core.c:304:35: error: 'TCP_TIME_WAIT' undeclared (first use in this function)
net/netfilter/nfnetlink_queue_core.c:304:35: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [net/netfilter/nfnetlink_queue_core.o] Error 1

Just a missing include of net/tcp_states.h

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nftables
David S. Miller [Mon, 6 Jan 2014 18:29:30 +0000 (13:29 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/pablo/nftables

Pablo Neira Ayuso says: <pablo@netfilter.org>

====================
nftables updates for net-next

The following patchset contains nftables updates for your net-next tree,
they are:

* Add set operation to the meta expression by means of the select_ops()
  infrastructure, this allows us to set the packet mark among other things.
  From Arturo Borrero Gonzalez.

* Fix wrong format in sscanf in nf_tables_set_alloc_name(), from Daniel
  Borkmann.

* Add new queue expression to nf_tables. These comes with two previous patches
  to prepare this new feature, one to add mask in nf_tables_core to
  evaluate the queue verdict appropriately and another to refactor common
  code with xt_NFQUEUE, from Eric Leblond.

* Do not hide nftables from Kconfig if nfnetlink is not enabled, also from
  Eric Leblond.

* Add the reject expression to nf_tables, this adds the missing TCP RST
  support. It comes with an initial patch to refactor common code with
  xt_NFQUEUE, again from Eric Leblond.

* Remove an unused variable assignment in nf_tables_dump_set(), from Michal
  Nazarewicz.

* Remove the nft_meta_target code, now that Arturo added the set operation
  to the meta expression, from me.

* Add help information for nf_tables to Kconfig, also from me.

* Allow to dump all sets by specifying NFPROTO_UNSPEC, similar feature is
  available to other nf_tables objects, requested by Arturo, from me.

* Expose the table usage counter, so we can know how many chains are using
  this table without dumping the list of chains, from Tomasz Bursztyka.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Mon, 6 Jan 2014 18:25:58 +0000 (13:25 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e only.

Majority of this series contains patches from Greg and Mitch to fix
up or add functionality to the PF/VF driver interactions.  Notably,
a fix for SR-IOV VF port VLAN which resolved the problem of port VLAN
configurations not being persistent across VF driver loads and unloads
and enable/disable of the feature.  Also do not enable the default port
on the VEB, which is designed only to bridge the PF to an Open vSwitch
or bridge.  Another fix to resolve a possible memory corruption
condition where ARQ messages are written to random memory locations.
Fix a problem where the 'ip link show' command would display stale
link address information after the link address was set via the 'ip
link set' command.

Anjali provides several patches, one which saves information that can
be used while cleaning the Tx ring and useful in detecting Tx hangs.
Then provides a fixes to the admin queue shutdown function to ensure
we are shutting down the queue in the shutdown path and ensure ASQ is
alive before issuing the admin queue command.

Shannon provides a fix for get/update vsi params where the incorrect
struct was being used.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoi40e: Do not allow AQ calls from ndo-ops
Anjali Singhai Jain [Thu, 28 Nov 2013 06:39:47 +0000 (06:39 +0000)]
i40e: Do not allow AQ calls from ndo-ops

If the device is not in a working state avoid making admin
queue (AQ) calls that rely on a working AQ.

Change-Id: Ifbba6d257b3a5b51bfe92938c04088c0baa21433
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: check asq alive before notify
Anjali Singhai Jain [Thu, 28 Nov 2013 06:39:46 +0000 (06:39 +0000)]
i40e: check asq alive before notify

Driver needs to make sure the send queue is alive before
trying to use it.

Chagne-Id: I9bd1f6159c45c98e63f562e3a8dfb57edfe50e13
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Admin queue shutdown fixes
Anjali Singhai Jain [Thu, 28 Nov 2013 06:39:45 +0000 (06:39 +0000)]
i40e: Admin queue shutdown fixes

Always call the AQ call to shutdown the queue in the shutdown path.

Check ASQ is alive before issuing the AQ command since we might be
resetting to recover from a bad state in which case we should not
issue the AQ command.

Use the register variable for length so it can be used by PF, VF
and GL AQ commands.

Change-Id: Ic3d305687ea3f1a6afa84e864b7a27bd38a9af32
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Hide the Port VLAN VLAN ID
Greg Rose [Thu, 28 Nov 2013 06:39:44 +0000 (06:39 +0000)]
i40e: Hide the Port VLAN VLAN ID

The VF VSI Port VLAN settings still allow the user to view VLAN tag in
the descriptor.  Fix the settings to hide the VLAN ID from the VF. The
VF is not supposed to be aware it is on a VLAN in the Port VLAN
scenario.

Change-Id: I976f2bacb455dbb750f8c53a781c689f02cb8907
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: use correct struct for get and update vsi params
Shannon Nelson [Thu, 28 Nov 2013 06:39:43 +0000 (06:39 +0000)]
i40e: use correct struct for get and update vsi params

The get_vsi_params and update_vsi_params functions were using a
different command struct that just happened to have an seid element in
the right place and so worked correctly anyway.  This patch fixes the
functions to use the right data struct.

There is no actual logic change.

Change-Id: I513b5e1dc293dfd5b2ba4fa443cbdbfa608d9d19
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Fix VF driver MAC address configuration
Greg Rose [Thu, 28 Nov 2013 06:39:42 +0000 (06:39 +0000)]
i40e: Fix VF driver MAC address configuration

Fix a problem where the 'ip link show' command would display stale
link address information after the link address was set via the 'ip
link set' command.  In addition, fix problem with the user being
allowed to overwrite the administratively set VF MAC address.

Change-Id: I669ed14e55f2b633ef7b456b713632b08468671c
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: support VFs on PFs other than 0
Mitch Williams [Thu, 28 Nov 2013 06:39:41 +0000 (06:39 +0000)]
i40e: support VFs on PFs other than 0

When communicating with VF devices over the AQ, the FW refers to the
VF by its global VF ID, not local the VF ID with reference to its
parent PF. Since the global and local VF IDs are identical for PF 0,
the code worked correctly on PF 0.

However, we cannot just use global IDs throughout the code as most of
the other references to the VF (VSI setup, register offsets, etc.)
require the local VF ID. Instead, we just add or subtract our base VF
ID when sending and receiving AQ messages.

Change-Id: I92f4332b4876bc68b2f9af9ebf48761f63b6bd97
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: acknowledge VFLR when disabling SR-IOV
Mitch Williams [Thu, 28 Nov 2013 06:39:40 +0000 (06:39 +0000)]
i40e: acknowledge VFLR when disabling SR-IOV

When SR-IOV is disabled, the (now nonexistent) virtual function
devices undergo a VFLR event. We don't need to handle this event
because the VFs are gone, but we do need to tell the HW that they are
complete. This fixes an issue with a phantom VFLR and broken VFs when
SR-IOV is re-enabled.

Change-Id: I7580b49ded0158172a85b14661ec212af77000c8
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: don't allocate zero size
Mitch Williams [Thu, 28 Nov 2013 06:39:39 +0000 (06:39 +0000)]
i40e: don't allocate zero size

Shockingly, the compiler didn't flag this uninitialized variable. This
fixes a potential memory corruption condition where ARQ messages are
written to random memory locations.

Change-Id: Iac82f4562d2bf3f42df3f3b2163d9cbed2160135
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: use struct assign instead of memcpy
Mitch Williams [Thu, 28 Nov 2013 06:39:38 +0000 (06:39 +0000)]
i40e: use struct assign instead of memcpy

Use struct assignment rather than an expensive memory copy.

Change-Id: I1d18d510774dfd41a9c1250cdef238a4187528f5
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Do not enable default port on the VEB
Greg Rose [Thu, 28 Nov 2013 06:39:37 +0000 (06:39 +0000)]
i40e: Do not enable default port on the VEB

Enabling the default port on the VEB causes all outgoing traffic from
virtual functions to be copied to the physical function.  The default
port is only supposed to be used if you wish to bridge the physical
function to a SW switch such as Open vSwitch or the Linux bridge. That
allows the SW switch to route traffic to VMs that are not using a
virtual function.

Eventually we'll want to implement the ndo_fdb_add, ndo_fdb_del, and
ndo_fdb_dump functions.  The ndo_fdb_add function would set the
default port on the VEB in those cases where the MAC/VLAN address
filters have overflowed.  Normally we would not want to use it.

Change-Id: I3990f0384fff2840c4e43bc0955dd0b701380852
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: avoid unnecessary register read
Mitch Williams [Thu, 28 Nov 2013 06:39:36 +0000 (06:39 +0000)]
i40e: avoid unnecessary register read

We don't need to read the base VF id. It's already stashed in the HW
struct.

Change-Id: Ib81e2f76fc40b12c966e014a856b481912cafefc
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: fix whitespace
Jesse Brandeburg [Thu, 28 Nov 2013 06:39:35 +0000 (06:39 +0000)]
i40e: fix whitespace

Trivial whitespace fix.

Change-Id: Ib7c70891a33c4b3d200c69367549d0dbdee0f076
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Fix SR-IOV VF port VLAN
Greg Rose [Thu, 28 Nov 2013 06:39:34 +0000 (06:39 +0000)]
i40e: Fix SR-IOV VF port VLAN

This patch fixes two different problems.
1) The port VLAN configuration was not persistent across VF driver
   loads and unloads.

2) The port VLAN configuration was only correct the first time it was
   set. Switching the port VLAN on and off would cause subsequent VLAN
   configurations to be corrupted in the VSI.  Ensure that the correct
   bits are being set for the VSI port VLAN configuration.

Change-Id: I7ebf5329f77eb8d73ccd3324eb346b3abeea737d
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Record dma buffer info for dummy packets
Anjali Singhai Jain [Thu, 28 Nov 2013 06:39:33 +0000 (06:39 +0000)]
i40e: Record dma buffer info for dummy packets

Save information that we can use while cleaning the tx ring. Also record
the time_stamp since we will need it to check tx hangs.

Change-Id: Ia3f1c17f6fec9bcb7fef2542d77eac7f6c4f115c
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agonet/mlx4_core: Warn if device doesn't have enough PCI bandwidth
Eyal Perry [Sun, 5 Jan 2014 15:41:08 +0000 (17:41 +0200)]
net/mlx4_core: Warn if device doesn't have enough PCI bandwidth

Check if the device get enough bandwidth from the entire PCI chain to satisfy
its capabilities. This patch determines the PCIe device's bandwidth capabilities
by reading its PCIe Link Capabilities registers and then call the
pcie_get_minimum_link function to ensure that the adapter is hooked into a slot
which is capable of providing the necessary bandwidth capabilities.

Signed-off-by: Eyal Perry <eyalpe@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Mon, 6 Jan 2014 01:31:01 +0000 (20:31 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e only.

Anjali provides two cleanups to remove unnecessary code and a fix
to resolve debugfs dumping only half the NVM.  Then provides a fix
to ethtool NVM reads where shadow RAM was used instead of actual
NVM reads.

Jesse provides a couple of fixes, one removes custom i40e functions
which duplicate existing kernel functionality.  Second fixes constant
cast issues by replacing __constant_htons with htons.

Mitch provides a couple of fixes for the VF interfaces in i40e.  First
provides a fix to guard against VF message races with can cause a panic.
Second fix reinitializes the buffer size each time we clean the ARQ,
because subsequent messages can be truncated. Lastly adds functionality
to enable/disable ICR 0 dynamically.

Vasu adds a simple guard against multiple includes of the i40e_txrx.h
file.

Shannon provides a couple of fixes, first fix swaps a couple of lines
around in the error handling if the allocation for the VSI array fails.
Second fixes an issue where we try to free the q_vector that has not
been setup which can panic the kernel.

David provides a patch to save off the point to memory and the length
of 2 structs used in the admin queue in order to store all info about
allocated kernel memory.

Neerav fixes ring allocation where allocation and clearing of rings
for a VSI should be using the alloc_queue_pairs and not num_queue_pairs.
Then removes the unused define for multi-queue enabled.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years ago8021q: make vlan_pcpu_stats visible without CONFIG_VLAN_8021Q
Hannes Frederic Sowa [Mon, 6 Jan 2014 00:41:20 +0000 (01:41 +0100)]
8021q: make vlan_pcpu_stats visible without CONFIG_VLAN_8021Q

macvlan needs vlan_pcpu_stats so make it visible even if compiling
without VLAN_8021Q support. Otherwise a very long compiler error happens.

Fixes: cdf3e274cf1b36 ("macvlan: unify macvlan_pcpu_stats and vlan_pcpu_stats")
Cc: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-By: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: netdev_kobject_init: annotate with __init
Daniel Borkmann [Mon, 6 Jan 2014 00:20:11 +0000 (01:20 +0100)]
net: netdev_kobject_init: annotate with __init

netdev_kobject_init() is only being called from __init context,
that is, net_dev_init(), so annotate it with __init as well, thus
the kernel can take this as a hint that the function is used only
during the initialization phase and free up used memory resources
after its invocation.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
David S. Miller [Mon, 6 Jan 2014 01:18:50 +0000 (20:18 -0500)]
Merge git://git./linux/kernel/git/pablo/nf-next

Pablo Neira Ayuso says:

====================
netfilter/IPVS updates for net-next

The following patchset contains Netfilter updates for your net-next tree,
they are:

* Add full port randomization support. Some crazy researchers found a way
  to reconstruct the secure ephemeral ports that are allocated in random mode
  by sending off-path bursts of UDP packets to overrun the socket buffer of
  the DNS resolver to trigger retransmissions, then if the timing for the
  DNS resolution done by a client is larger than usual, then they conclude
  that the port that received the burst of UDP packets is the one that was
  opened. It seems a bit aggressive method to me but it seems to work for
  them. As a result, Daniel Borkmann and Hannes Frederic Sowa came up with a
  new NAT mode to fully randomize ports using prandom.

* Add a new classifier to x_tables based on the socket net_cls set via
  cgroups. These includes two patches to prepare the field as requested by
  Zefan Li. Also from Daniel Borkmann.

* Use prandom instead of get_random_bytes in several locations of the
  netfilter code, from Florian Westphal.

* Allow to use the CTA_MARK_MASK in ctnetlink when mangling the conntrack
  mark, also from Florian Westphal.

* Fix compilation warning due to unused variable in IPVS, from Geert
  Uytterhoeven.

* Add support for UID/GID via nfnetlink_queue, from Valentina Giusti.

* Add IPComp extension to x_tables, from Fan Du.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoi40e: remove un-necessary io-write
Anjali Singhai Jain [Thu, 28 Nov 2013 06:39:40 +0000 (06:39 +0000)]
i40e: remove un-necessary io-write

Driver needs to clean PBA only when interrupts are turned off and we
are polling instead.

Change-Id: Ic0c1da761bd3abe7f73b1cc8bcddf8e3a232fd0f
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Remove unnecessary prototypes
Anjali Singhai Jain [Thu, 28 Nov 2013 06:39:39 +0000 (06:39 +0000)]
i40e: Remove unnecessary prototypes

These functions don't need a prototype as they are defined
in the file before they are called.

Change-Id: Ie17ffad4a29a9c0df434c4ebc4681128a6095c65
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: I40E_FLAG_MQ_ENABLED is not used
Neerav Parikh [Thu, 28 Nov 2013 06:39:38 +0000 (06:39 +0000)]
i40e: I40E_FLAG_MQ_ENABLED is not used

Remove references to I40E_FLAG_MQ_ENABLED from the code
as it doesn't seem to be used anywhere.

Change-Id: I4c89fb65b2cdd26fbb0c58fccbbb4b03f0e5f1b3
Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Fix ring allocation
Neerav Parikh [Thu, 28 Nov 2013 06:39:37 +0000 (06:39 +0000)]
i40e: Fix ring allocation

The allocation and clearing of rings for a VSI should be
using the alloc_queue_pairs and not num_queue_pairs.

The alloc_queue_pairs per VSI is a pre-allocated number
of queues assigned to a VSI; based on number of TCs enabled
only certain number of queues may be used from that. This
is mainly valid only for the LAN VSI case as that is the
only VSI that may be enabled with multiple traffic classes.
In the future the number of TCs may change based on DCBX
configuration.

The actual number of queues that are enabled/configured is
based on the number of TCs enabled for a given VSI and that
is stored in num_queue_pairs.

With this change num_[tr]x_queues is unused so remove them.

Change-Id: I9c2f84778bb25f7313c630e9b002a0caa883ce29
Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: catch unset q_vector
Shannon Nelson [Thu, 28 Nov 2013 06:39:36 +0000 (06:39 +0000)]
i40e: catch unset q_vector

Don't try to free a q_vector that hasn't been set up as it can
panic the kernel.

Change-Id: I0650cc6c441d0779788c522c790293c276d14fbc
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: keep allocated memory in structs
David Cassard [Thu, 28 Nov 2013 06:39:35 +0000 (06:39 +0000)]
i40e: keep allocated memory in structs

Save both a pointer to memory and the length in order to store all
info about allocated kernel memory.  This patch changes some adminq
allocations to preserve the full i40e_dma_mem/i40e_virt_mem structs
for every allocation.

Change-Id: Ibcf96159aba4ba61f839d16d87d19478df28e630
Signed-off-by: David Cassard <david.g.cassard@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: fix error handling when alloc of vsi array fails
Shannon Nelson [Thu, 28 Nov 2013 06:39:34 +0000 (06:39 +0000)]
i40e: fix error handling when alloc of vsi array fails

Swap a couple lines around in the error handling if the kzalloc() for
the pf->vsi array fails.  This was causing a kernel BUG because the
call to i40e_clear_interrupt_scheme() was assuming the pf->vsi[] array
existed.  In this fix it is possible that i40e_reset_interrupt_capability()
will get called twice, but this is a safe action.

Change-Id: I939163ccaa89baac7511556d36bc873864c35ae1
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: reinit buffer size each time
Mitch Williams [Thu, 28 Nov 2013 06:39:33 +0000 (06:39 +0000)]
i40e: reinit buffer size each time

When cleaning the ARQ, we must reinitialize the buffer size each time we
go through the loop, because i40e_clean_arq_element returns the message
length in the same field. Without this change, subsequent messages can
be truncated to the length of the previous message.

Change-Id: Ic9c32ff843faf0fc3196d21351a1c3a60c6158eb
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: use functions to enable and disable icr 0
Mitch Williams [Thu, 28 Nov 2013 06:39:32 +0000 (06:39 +0000)]
i40e: use functions to enable and disable icr 0

Introduce i40e_irq_dynamic_disable_icr0 and use it and its previously-
extant counterpart when appropriate.

Change-Id: Ieb4037874fba2e96fc2354b34a97a3cb8f6490f3
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: add header file flag _I40E_TXRX_H_
Vasu Dev [Thu, 28 Nov 2013 06:39:31 +0000 (06:39 +0000)]
i40e: add header file flag _I40E_TXRX_H_

Add an include header guard to guard against multiple includes

Change-Id: I73efa03efc912d2047edab903c7caed05b444da2
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: guard against vf message races
Mitch Williams [Thu, 28 Nov 2013 06:39:30 +0000 (06:39 +0000)]
i40e: guard against vf message races

When disabling and enabling VFs on a live system with the VF driver
loaded, it's possible to receive an admin queue message from the VF
driver at an inconvenient time, e.g. when the associated data structures
aren't present or configured. This causes a rather inconvenient panic.

To guard against this, we change the order of when we set num_alloc_vfs
when turning off SR-IOV, and then gate processing of any VF messages
based upon that value. Likewise, when enabling VFs, we shut off the
relevant interrupt until configuration is complete.

Change-Id: I0c172c056616c2bebd78bbc807ab446eb484deea
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: fix constant cast issues
Jesse Brandeburg [Thu, 28 Nov 2013 06:39:29 +0000 (06:39 +0000)]
i40e: fix constant cast issues

replace __constant_htons with htons

Change-Id: I123a5318bae34c8b004c71db07c56f137c685849
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Change the ethtool NVM read method to use AQ
Anjali Singhai Jain [Thu, 28 Nov 2013 06:39:28 +0000 (06:39 +0000)]
i40e: Change the ethtool NVM read method to use AQ

Earlier we were reading Shadow RAM (copy of the NVM) which can differ
from the actual NVM. Use AQ instead to read the actual NVM.

Change-Id: Ia0f2773b722db77d093f738c068af872be69bbd4
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: fix mac address checking
Jesse Brandeburg [Thu, 28 Nov 2013 06:39:27 +0000 (06:39 +0000)]
i40e: fix mac address checking

Remove custom i40e functions around ethernet addresses that are
duplicating already existing kernel functionality.

Also ends up fixing a bug with multicast addresses.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Dump the whole NVM, not half
Anjali Singhai Jain [Thu, 28 Nov 2013 06:39:26 +0000 (06:39 +0000)]
i40e: Dump the whole NVM, not half

Debugfs was reading exactly half the number of words, fix it.

Change-Id: Ieb217f3c6dca455d44e50a0dc61a6664c0cb2265
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoMerge branch 'bgmac'
David S. Miller [Sun, 5 Jan 2014 01:25:55 +0000 (20:25 -0500)]
Merge branch 'bgmac'

bgmac: add initial support for core rev 4 on ARM BCM47xx

====================
This adds support for core rev 4 and ARM BCM47XX.
With an other fix to the platform code I am now getting over 200 MBit/s
with this Ethernet driver, the DMA problems are solved are unrelated
to bgmac.

v3:
   - moved flags calculation for bcma_core_enable() into if block
   - remove hard coding of phy address to BGMAC_PHY_NOREGS

v2: add changed suggested by RafaÅ‚
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobgmac: add support for Northstar SoC (BCM4707, BCM53018)
Hauke Mehrtens [Sun, 5 Jan 2014 00:10:47 +0000 (01:10 +0100)]
bgmac: add support for Northstar SoC (BCM4707, BCM53018)

This adds support for the Northstar SoC. This SoC does not have a PMU in
bcma and no register on it should be called. In addition it support 2.5
GBit/s Ethernet to the PHY.

This GMAC core is not fully working there are still problems with the
DMA controller.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobgmac: reset all cores on Northstar SoC
Hauke Mehrtens [Sun, 5 Jan 2014 00:10:46 +0000 (01:10 +0100)]
bgmac: reset all cores on Northstar SoC

On the Northstar SoC (BCM4707 and BCM53018) we have to enable all GMAC
cores when we just want to use on. We iterate over all the cores and
activate them.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobgmac: add support for new BGMAC_CMDCFG_SR position on core rev >= 4
Hauke Mehrtens [Sun, 5 Jan 2014 00:10:45 +0000 (01:10 +0100)]
bgmac: add support for new BGMAC_CMDCFG_SR position on core rev >= 4

The BGMAC_CMDCFG_SR register is at a different position on core rev >= 4
We do not know where this register is on a rev 5 or higher core, I have
newer seen such a core.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobgmac: initialize the DMA controller of core rev >= 4
Hauke Mehrtens [Sun, 5 Jan 2014 00:10:44 +0000 (01:10 +0100)]
bgmac: initialize the DMA controller of core rev >= 4

The DMA controller used in the device supported by GMAC with core rev
>= 4 has some new options which are now set to the default values used
in the Broadcom SDK.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobcma: export bcma_find_core_unit()
Hauke Mehrtens [Sun, 5 Jan 2014 00:10:43 +0000 (01:10 +0100)]
bcma: export bcma_find_core_unit()

This function is used to get a specific core when there is more than
one core of that specific type. This is used in bgmac to reset all GMAC
cores.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agotipc: remove unused code
stephen hemminger [Sat, 4 Jan 2014 21:49:14 +0000 (13:49 -0800)]
tipc: remove unused code

Remove dead code;
       tipc_bearer_find_interface
       tipc_node_redundant_links

This may break out of tree version of TIPC if there still is one.
But that maybe a good thing :-)

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agotipc: make local function static
stephen hemminger [Sat, 4 Jan 2014 21:47:48 +0000 (13:47 -0800)]
tipc: make local function static

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agodccp: make local variable static
stephen hemminger [Sat, 4 Jan 2014 21:46:29 +0000 (13:46 -0800)]
dccp: make local variable static

Make DCCP module config variable static, only used in one file.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agodccp: remove obsolete code
stephen hemminger [Sat, 4 Jan 2014 21:46:11 +0000 (13:46 -0800)]
dccp: remove obsolete code

This function is defined but not used.
Remove it now, can be resurrected if ever needed.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agomacvlan: unify macvlan_pcpu_stats and vlan_pcpu_stats
Li RongQing [Sat, 4 Jan 2014 06:22:34 +0000 (14:22 +0800)]
macvlan: unify macvlan_pcpu_stats and vlan_pcpu_stats

They are same, so unify them as one; since macvlan is a kind of vlan,
vlan_pcpu_stats should be a proper name for vlan and macvlan.

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: unify the pcpu_tstats and br_cpu_netstats as one
Li RongQing [Sat, 4 Jan 2014 05:57:59 +0000 (13:57 +0800)]
net: unify the pcpu_tstats and br_cpu_netstats as one

They are same, so unify them as one, pcpu_sw_netstats.

Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats
from if_tunnel and remove br_cpu_netstats from br_private.h

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Sun, 5 Jan 2014 00:50:35 +0000 (19:50 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e and pci_regs.h.

Anjali provides a patch to prevent messages from stray HMC events, except
at interrupt message level, and refactors the HMC error handling.

Catherine adds routines in probe to populate/check PCI bus speed and width,
then verify we are in a 8GT/s x8 PCIe slot and warn when we are not.

Shannon adds Wake-on-LAN support for i40e, fixes curly brace use as well as
return type for i40e_vsi_clear_rings().

Joseph implements receive offload for VXLAN for i40e, where the hardware
supports checksum offload/verification of the inner/outer header.

Mitch provides the bulk of the changes, where he refactors the VF reset
code so that it works on real hardware.  Then does code cleanup by
calling existing functions to enable and disable queues for VFs and
remove unused functions.  Removes a unnecessary log messages that are
seen at every VF reset, for example complaining about disabling queues
that are already disabled.  Fixes an error return when the VF asks to
add an invalid MAC address and if the VF sends a bad message, make it
more informative about what is actually going on.

Jesse refactors the LED function to flash LED lights correctly.

v2:
 - removed patch 5 "i40e: add set settings and pauseparam" based on
   feedback from Ben Hutchings, will re-work that patch for later
   submission
 - Added patch "i40e: Implementation of vxlan ndo's" from Joseph to
   address Or Gerlitz's questions and concerns.  This patch adds the
   implementation for the VXLAN ndo's and allows the hardware to do
   receive checksum offload for inner packets on the UDP ports that
   VXLAN notifies us about.
 - Added patch "i40e: using for_each_set_bit to simplify the code"
   from Wei Yongjun.  This patch uses for_each_set_bit() to simply
   the code.

v3:
 - fixed indentation issue in patch 11 based on feedback from
   Sergei Shtylyov.

Sorry for the delayed release of v4, it was delayed to the holidays.

v4:
 - Addressed Or Gerlitz's concerns about trying to get a hold of a mutex
   while holding a spin lock in patch 6 by executing the AQ commands from
   a subtask.
 - Addressed David Miller's Kconfig concerns by creating a Kconfig VXLAN
   option for i40e and wrapped appropriate code with the config option in
   patch 6.
 - Updated patch 7 based on the changes made in patch 6 in the above two
   bullets.

v5:
 - Added the patch to pci_regs.h based on David Miller's feedback to add
   PCI defines for speed and width
 - Updated patch 3 description to better explain the changes based on
   feedback from David Miller
 - Updated patch 4 to use the newly added defines to pci_regs.h instead
   of local defines
 - Updated patch 7 to use <net/vxlan.h> in the #include based on feedback
   from David Miller
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophylib: make phy_scan_fixups() static
Sergei Shtylyov [Sun, 5 Jan 2014 00:28:27 +0000 (03:28 +0300)]
phylib: make phy_scan_fixups() static

phy_scan_fixups()  isn't and shouldn't be called by the drivers directly, so
unexport it. And since Florian Fainelli's recent patches, the function is only
called locally, so we can make it static as well.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophylib: remove unused adjust_state() callback
Sergei Shtylyov [Sun, 5 Jan 2014 00:27:17 +0000 (03:27 +0300)]
phylib: remove unused adjust_state() callback

Remove adjust_state() callback from 'struct phy_device' since it seems to have
never been really used from the inception: phy_start_machine() has been always
called with 2nd argument equal to NULL.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophy: kill excess empty lines
Sergei Shtylyov [Sun, 5 Jan 2014 00:24:55 +0000 (03:24 +0300)]
phy: kill excess empty lines

Remove excess empty lines such as those between a function call and its result
check and just duplicate ones between functions.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophy: kill excess code
Sergei Shtylyov [Sun, 5 Jan 2014 00:23:19 +0000 (03:23 +0300)]
phy: kill excess code

Remove some excess code:

- convert assignments to initializers;

- kill useless assignments before *return*.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophy: kill useless local variables
Sergei Shtylyov [Sun, 5 Jan 2014 00:21:52 +0000 (03:21 +0300)]
phy: kill useless local variables

A number of functions (especially in phy.c) has local variables that were hardly
needed in the first place -- remove them.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years ago<linux/phy.h>: coding style fixes
Sergei Shtylyov [Sun, 5 Jan 2014 00:20:17 +0000 (03:20 +0300)]
<linux/phy.h>: coding style fixes

Running 'checkpatch.pl' gives some errors and warnings:

- no spaces around =;

- * separated by space from the function name;

- { in function definition not on a separate line;

- line over 80 characters.

While fixing these, also fix the following style issues:

- file name in the heading comment;

- alignment not matching open paren.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agomdio_bus: coding style fixes
Sergei Shtylyov [Sun, 5 Jan 2014 00:18:27 +0000 (03:18 +0300)]
mdio_bus: coding style fixes

The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left
some warnings like:

- including <asm/io.h> instead of <linux/io.h>;

- including <asm/uaccess.h> instead of <linux/uaccess.h>;

- block comments using empty /* line;

- 'struct dev_pm_ops' variable not being *const*.

While fixing these, also fix the following style issues (some of which were
found running 'checkpatch.pl --strict'):

- alignment not matching open paren;

- file name in the heading comment.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophy: coding style fixes
Sergei Shtylyov [Sun, 5 Jan 2014 00:17:06 +0000 (03:17 +0300)]
phy: coding style fixes

The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left
the numerous warnings:

- including <asm/io.h> instead of <linux/io.h>;

- including <asm/uaccess.h> instead of <linux/uaccess.h>;

- *extern* declaration in .c file;

- block comments using empty /* line;

- block comments not starting with * on the middle lines;

- block comments not having trailing */ on a separate line;

- EXPORT_SYMBOL() not immediately following its function;

- unnecessary {} for signle statement block;

- spaces before tabs.

While fixing these, also fix the following style issues (some of which were
found running 'checkpatch.pl --strict'):

- alignment not matching open paren;

- missing {} on one of the *if* arms where another has them;

- use of sizeof(struct structure) instead of sizeof(*variable);

- multiple assignments on one line;

- empty line before };

- file names in the heading comments;

- missing spaces around operators;

- no {} around multi-line *if* operator's arm;

- unneeded () around subexpressions;

- incomplete kernel-doc comment style;

- comment line exceeding 80 characters;

- missing empty line after declarations.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoi40e: report VF MAC addresses correctly
Mitch Williams [Thu, 28 Nov 2013 06:39:34 +0000 (06:39 +0000)]
i40e: report VF MAC addresses correctly

If the user does not assign a VF MAC address, then just report it as
zero.  Attempting to guess the correct primary MAC address of the VF is a
futile and heartbreaking endeavour.

Change-Id: I2673577a160afb6fc55094c890467b44e60c7584
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: update led set args
Jesse Brandeburg [Thu, 28 Nov 2013 06:39:33 +0000 (06:39 +0000)]
i40e: update led set args

Add an argument to led function and refactor code to flash LED lights
correctly.

Change-Id: I00b21607ced53aaa057159503875708871946259
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: make a define from a large constant
Mitch Williams [Thu, 28 Nov 2013 06:39:32 +0000 (06:39 +0000)]
i40e: make a define from a large constant

Make a define used in the header file by both VF and PF drivers.

Change-Id: Ie9e35adcc021cd6a8f7513934984eb4ed55774f5
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: be more informative
Mitch Williams [Thu, 28 Nov 2013 06:39:31 +0000 (06:39 +0000)]
i40e: be more informative

If the VF sends a bad message, be more informative about what it
actually is.

Change-Id: I89e06d2db416a1d05aeea016dd6e8b7870cae99a
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: fix error return
Mitch Williams [Thu, 28 Nov 2013 06:39:30 +0000 (06:39 +0000)]
i40e: fix error return

If the VF asks to add an invalid MAC address, tell it that instead of
just using a generic return code.

Change-Id: I366aff5449fa5874ad51e2734cac2a71783ab14b
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: remove chatty log messages
Mitch Williams [Thu, 28 Nov 2013 06:39:29 +0000 (06:39 +0000)]
i40e: remove chatty log messages

Don't complain when we disable queues that are already disable, or
enable them when they're already enabled. This removes a bunch of bogus
log messages that we see at every VF reset.

Change-Id: Ia127be572abdccc48a53d8c43f8a07b8bb920de1
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: remove redundant code
Mitch Williams [Thu, 28 Nov 2013 06:39:28 +0000 (06:39 +0000)]
i40e: remove redundant code

Don't keep separate functions to enable and disable queues for the VFs.
Just call the existing function that everybody else uses. Remove the
unused functions.

Change-Id: I15db9aad64a59e502bfe1e0fdab9b347ab85c12c
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: refactor VF reset flow
Mitch Williams [Thu, 28 Nov 2013 06:39:27 +0000 (06:39 +0000)]
i40e: refactor VF reset flow

Fix the VF reset flow so that it works on real hardware. After
discussions with the HW team, the reset flow has been changed
somewhat.

- Change the i40e_reset_vf function to a void type, and fix
  up the callers to reflect this.
- Move the MSI-X disable code to i40e_free_vf_res since it must
  be done every time the VF is freed, regardless of whether or
  not it is reset.
- Ensure that the PCIe bus is quiet before polling the reset bit.
- Don't clear the VFGEN_RSTAT1 register at the beginning as it is
  cleared by the reset.
- Poll longer for the reset to be done.
- Disable the queues using an existing function rather than
  rolling our own.
- Free and reallocate the VSI after reset to avoid rx hang.

Change-Id: I11e2590431cb73e8663714d1cc5b23d59b809033
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: move i40e_reset_vf
Mitch Williams [Thu, 28 Nov 2013 06:39:26 +0000 (06:39 +0000)]
i40e: move i40e_reset_vf

The VF reset code will be refactored in future patches. Part of that
refactor required it to call i40e_alloc_vf_res and i40e_free_vf_res, so
the function must be moved. In order to make the future patches more
readable, we perform the function move here, with no other changes.

Change-Id: If6567c9c0bada6caafb2ee0227e0d9d50d05f27f
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Rx checksum offload for VXLAN
Joseph Gasparakis [Sat, 28 Dec 2013 05:27:57 +0000 (05:27 +0000)]
i40e: Rx checksum offload for VXLAN

This implements receive offload for VXLAN for i40e.  The hardware
supports checksum offload/verification of the inner/outer header.

Change-Id: I450db300af6713f2044fef1191a0d1d294c13369
Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Implementation of VXLAN ndo's
Jeff Kirsher [Sat, 28 Dec 2013 07:32:18 +0000 (07:32 +0000)]
i40e: Implementation of VXLAN ndo's

This adds the implementation for the VXLAN ndo's.  This allows the
hardware to do RX checksum offload for inner packets on the UDP ports
that VXLAN notifies us about.

Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: fix curly brace use and return type
Shannon Nelson [Thu, 28 Nov 2013 06:39:23 +0000 (06:39 +0000)]
i40e: fix curly brace use and return type

Add curly-braces on a multi-line function.  While we're here we
also change to return void in i40e_vsi_clear_rings() since no
caller cares.

Change-Id: I261fcef20e2a39e18d83ec08fdd14456131dee91
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: add wake-on-lan support
Shannon Nelson [Thu, 28 Nov 2013 06:39:22 +0000 (06:39 +0000)]
i40e: add wake-on-lan support

Wake on LAN is disabled by default and will remain that way for most
platforms, but there is an NVM setting that allows vendors to enable it
for a port if they think they've provided the right power environment
for the device.  This patch adds code to check the NVM setting and enable
Magic Packet use if WoL is enabled for the port.

Since only Magic Packet is supported, there's not a lot of HW configuration
needed.

Change-Id: I44e904a7b15695e34683009f487064cd86ea59b0
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Populate and check pci bus speed and width
Catherine Sullivan [Thu, 28 Nov 2013 06:39:21 +0000 (06:39 +0000)]
i40e: Populate and check pci bus speed and width

Call i40e_set_pci_config_data from probe, then check that
we are in a 8GT/s x8 PCIe slot and send a warning if we are not.

Change-Id: I62815c574cee50d2787c50bbe956dde7a7a75a11
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Suppress HMC error to Interrupt message level
Anjali Singhai Jain [Thu, 28 Nov 2013 06:39:20 +0000 (06:39 +0000)]
i40e: Suppress HMC error to Interrupt message level

The HMC error interrupt would generate an un-necessary message
"unhandled interrupt", causing extra log spam, in addition to causing
a reset that was not necessary.  Prevent this issue by handling the
HMC error case explicitly, and only reset if the interrupt was from
some of the other causes.

Change-Id: Iabd203ba1dfc26a136b638597f3e9991acfa29f3
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: using for_each_set_bit to simplify the code
Wei Yongjun [Tue, 24 Sep 2013 05:17:36 +0000 (05:17 +0000)]
i40e: using for_each_set_bit to simplify the code

Using for_each_set_bit() to simplify the code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agopci_regs.h: Add PCI bus link speed and width defines
Jeff Kirsher [Sat, 28 Dec 2013 12:28:18 +0000 (04:28 -0800)]
pci_regs.h: Add PCI bus link speed and width defines

Add missing PCI bus link speed 8.0 GT/s and bus link widths of
x1, x2, x4 and x8.

CC: <linux-kernel@vger.kernel.org>
CC: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
10 years agoMerge branch 'bonding'
David S. Miller [Sat, 4 Jan 2014 02:03:27 +0000 (21:03 -0500)]
Merge branch 'bonding'

Scott Feldman says:

====================
bonding: final set of netlink patches

v2:

 - per Jiri's comment, fix ad_select checking against parm table by
   spliting bond_parse_parm() into several funcs.  Go ahead and apply
   same technique to all parameters using parm table.

 - fix netlink msg size to including missing nest attr

 - drop the last patch for active_slaves.  This patch needs to be
   reworked per Jiri's comments and shouldn't hold up finalizing
   the conversion of the existing parameter to netlink attributes.

Ding, assuming this patch set goes in, you should have all you
need to start converting module parameter setting/checking over to
funcs in *_options.c.

I'll send iproute2 patch for bonding netlink support once this patch
set is accepted.

v1:

The following series implements the last set of bonding netlink attributes
for 802.3ad mode:

lacp_rate
ad_select
ad_info, nest of:
ad_aggregator
ad_num_ports
ad_actor_key
ad_partner_key
ad_partner_mac

The last patch adds an additional netlink attribute, active_slaves, which
is a nested list of ifindices for current active slaves.  We're using this
list to enable/disable hashing of ports in a hardware LAG implementation.
In the same way bonding driver includes/excludes ports for 802.3ad egress
hashing, hardware ports are included/excluded from egress hashing by
hardware based on port active status.  Yes, data path offloaded to
hardware, control path remains in kernel via bonding driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: add bounds checking for tbl params
sfeldma@cumulusnetworks.com [Fri, 3 Jan 2014 22:28:18 +0000 (14:28 -0800)]
bonding: add bounds checking for tbl params

Add bounds checking for params defined with parm tbl.

Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: fix netlink msg size
sfeldma@cumulusnetworks.com [Fri, 3 Jan 2014 22:28:11 +0000 (14:28 -0800)]
bonding: fix netlink msg size

Add missing space for IFLA_BOND_ARP_IP_TARGET nest header.

Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: add ad_info attribute netlink support
sfeldma@cumulusnetworks.com [Fri, 3 Jan 2014 22:18:56 +0000 (14:18 -0800)]
bonding: add ad_info attribute netlink support

Add nested IFLA_BOND_AD_INFO for bonding 802.3ad info.

Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: add ad_select attribute netlink support
sfeldma@cumulusnetworks.com [Fri, 3 Jan 2014 22:18:49 +0000 (14:18 -0800)]
bonding: add ad_select attribute netlink support

Add IFLA_BOND_AD_SELECT to allow get/set of bonding parameter
ad_select via netlink.

Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: add lacp_rate attribute netlink support
sfeldma@cumulusnetworks.com [Fri, 3 Jan 2014 22:18:41 +0000 (14:18 -0800)]
bonding: add lacp_rate attribute netlink support

Add IFLA_BOND_AD_LACP_RATE to allow get/set of bonding parameter
lacp_rate via netlink.

Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'tg3'
David S. Miller [Sat, 4 Jan 2014 01:59:56 +0000 (20:59 -0500)]
Merge branch 'tg3'

Nithin Nayak Sujir says:

====================
tg3: Unicast filter support and misc fixes

Michael Chan (2):
  tg3: Refactor __tg3_set_mac_addr()
  tg3: Add unicast filtering support.

Nithin Nayak Sujir (3):
  tg3: Set the MAC clock to the fastest speed during boot code load
  tg3: Poll cpmu link state on APE + ASF enabled devices
  tg3: Update version to 3.136
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agotg3: Update version to 3.136
Nithin Sujir [Fri, 3 Jan 2014 18:09:15 +0000 (10:09 -0800)]
tg3: Update version to 3.136

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agotg3: Poll cpmu link state on APE + ASF enabled devices
Nithin Sujir [Fri, 3 Jan 2014 18:09:14 +0000 (10:09 -0800)]
tg3: Poll cpmu link state on APE + ASF enabled devices

On ASF enabled devices where the mgmt firmware runs on the application
processing engine, there is a race between the tg3 driver processing a
link change event and the ASF firmware clearing the link changed bit in
the EMAC status register. This leads to link notifications to the driver
sometimes getting lost.

Poll the CPMU link state as a backup for the normal interrupt path
update if ASF is enabled.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agotg3: Set the MAC clock to the fastest speed during boot code load
Nithin Sujir [Fri, 3 Jan 2014 18:09:13 +0000 (10:09 -0800)]
tg3: Set the MAC clock to the fastest speed during boot code load

On the 5717, 5718 and 5719 devices, the bootcode runs slower when any
port doesn't have a link due to clock speed slowing down as part of the
link-aware feature. This leads to the driver timing out waiting for the
bootcode signature.

This patch overrides the clock policy to the highest frequency just before
reset and restores it after the bootcode is up.

Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agotg3: Add unicast filtering support.
Michael Chan [Fri, 3 Jan 2014 18:09:12 +0000 (10:09 -0800)]
tg3: Add unicast filtering support.

Up to 3 additional unicast addresses can be added to the perfect match
filter table.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agotg3: Refactor __tg3_set_mac_addr()
Michael Chan [Fri, 3 Jan 2014 18:09:11 +0000 (10:09 -0800)]
tg3: Refactor __tg3_set_mac_addr()

so that individual MAC address filter entries can be set.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agollc: make lock static
stephen hemminger [Fri, 3 Jan 2014 17:19:51 +0000 (09:19 -0800)]
llc: make lock static

The llc_sap_list_lock does not need to be global, only acquired
in core.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agosocket: cleanups
stephen hemminger [Fri, 3 Jan 2014 17:17:14 +0000 (09:17 -0800)]
socket: cleanups

Namespace related cleaning

 * make cred_to_ucred static
 * remove unused sock_rmalloc function

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agosh_eth: coding style fixes
Sergei Shtylyov [Fri, 3 Jan 2014 12:52:22 +0000 (15:52 +0300)]
sh_eth: coding style fixes

Running 'scripts/checkpatch.pl' on the driver files gives numerous warnings:

- block comments using empty /* line;

- unneeded \ at end of lines;

- message string split across lines;

- use of __attribute__((aligned(n))) instead of __aligned(n) macro;

- use of __attribute__((packed)) instead of __packed macro.

Additionally, running 'scripts/checkpatch.pl --strict' gives more complaints:

- including the paragraph about writing to FSF into the heading comment;

- alignment not matching open paren;

- multiple assignments on one line;

- use of CamelCase names;

- missing {} on one of the *if* arms where another has them;

- spinlock definition without a comment.

While fixing these, also do some more style cleanups:

- remove useless () around expressions;

- add {} around multi-line *if* operator's arm;

- remove space before comma;

- add spaces after /* and before */;

- properly align continuation lines of broken up expressions;

- realign comments to the structure fields.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agor8152: fix the wrong return value
hayeswang [Fri, 3 Jan 2014 03:21:56 +0000 (11:21 +0800)]
r8152: fix the wrong return value

The return value should be the boolean value, not the error code.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Spotted-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agosmsc9420: use named constants for pci_power_t values
Julia Lawall [Thu, 2 Jan 2014 23:40:31 +0000 (00:40 +0100)]
smsc9420: use named constants for pci_power_t values

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2;
@@

pci_enable_wake(e1,
- 0
+ PCI_D0
,e2)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>