[JFFS2] Add support for JFFS2-on-Dataflash devices.

For Dataflash, can_mark_obsolete = false and the NAND write buffering
code (wbuf.c) is used.

Since the DataFlash chip will automatically erase pages when writing,
the cleanmarkers are not needed - so cleanmarker_oob = false and
cleanmarker_size = 0

DataFlash page-sizes are not a power of two (they're multiples of 528
bytes).  The SECTOR_ADDR macro (added in the previous core patch) is
replaced with a (slower) div/mod version if CONFIG_JFFS2_FS_DATAFLASH is
selected.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Core changes required to support JFFS2-on-Dataflash devices.

DataFlash page-sizes are not a power of two (they're multiples of 528
bytes).  There are a few places in JFFS2 code where sector_size is used
as a bitmask.  A new macro (SECTOR_ADDR) was defined to calculate these
sector addresses. For non-DataFlash devices, the original (faster)
bitmask operation is still used.

In scan.c, the EMPTY_SCAN_SIZE was a constant of 1024.
Since this could be larger than the sector size of the DataFlash, this
is now basically set to MIN(sector_size, 1024).

Addition of a jffs2_is_writebuffered() macro.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Unabuse file-f_mode for OTP purpose

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] User interface to Protection Registers

This is implemented using a ioctl to switch the MTD char device into
one of the different OTP "modes", at which point read/write/seek can
operate on the selected OTP area.  Also some extra ioctls to query
for size and lock protection segments or groups.  Some example user
space utilities are provided.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Support for protection register support on Intel FLASH chips

This enables support for reading, writing and locking so called
"Protection Registers" present on some flash chips.
A subset of them are pre-programmed at the factory with a
unique set of values. The rest is user-programmable.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Prevent deadlock during write buffer recovery

Prevent deadlock when checking erased block for
space allocation during wbuf recovery.

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Add OTP basisc

add structure definition for OTP region info

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] amd_flash: Fix chip ID clash

* Removed table entry for AM29BDS643D, since device ID clashes with AM29DL640G
and both chips support CFI.

Signed-off-by: Jonas Holmberg <jonas.holmberg@axis.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Remove NAND dependencies for NOR FLASH

make NAND code work on NOR flash again

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] DiskOnChip: big endian fix for NFTL devices

Make NFTL devices work on big endian machines.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] DiskOnChip code cleanup

Remove commented ugliness

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] DiskOnChip use CONFIG_ options instead of random symbols

Using the CONFIG_ options from KConfig seems to work better :8

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Code cleanup

Code beautification and block filing correction for optimization.

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Fix MTD device probing

Try larger numbers of chips before smaller
numbers of chips across the bus width.

This means we'll avoid misdetecting a 2 x16 array as 1 x32 if the
high 16-bits happen to read as zeros in the QRY area.

Signed-off-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Fix refile of blocks due to write failure.

avoid segfault when nextblock was refiled because of a write failure
- avoid filing blocks on the clean list when they have wasted
space

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Fix block refiling

- block refiling when writing directly to flash a buffer
which is bigger than wbuf
- retry cases for flushing wbuf

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Fix write buffer retry case

Correction of retry case to avoid silent failure of rmdir
when jffs2_wbuf_recover GCs the previous entry (+ corresponding
dnode case).

Signed-off-by: Estelle Hammache <estelle.hammache@st.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] rtc_from4 error status check, disable virtual erase blocks

Added routine to perform extra error status checks on erase and write
failures to determine if errors are correctable.
Added option to prevent JFFS2 from using virtual erase blocks.
Performed minor cleanup on whitespace and comments.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND Add optional ECC status check callback

Add optional hardware specific callback routine to perform extra error
status checks on erase and write failures for devices with hardware ECC.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Platform RAM Driver

Driver for generic RAM blocks which are exported by an platform_device
from the device driver system.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND use symbols instead of literals

Replace some literals with defined symbols.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND SharpSL fix default partition size

Correct Poodle default partition size

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Avoid warning for empty filesystems

Avoid "Eep. No valid nodes for ino #1" message for just-created filesystem.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND replace yield

Replace yield by msleep. M.Wilcox stared at it and frowned

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] bast-flash partitions fixup

Ensure the whole device is added if there are no partitions found on the
device, so that at least the flash can be read/written.

Replace some of the constants with their SZ_xxx counterparts

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Renesas AG-AND device recovery

Add routine to perform device recovery (deplete) procedure.
Clean up some compiler warnings.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND workaround for AG-AND disturb issue. AG-AND recovery

Added workaround for Renesas AG-AND chips "disturb" issue
for Bad Block Table.
Added support for the device recovery command sequence
for Renesas AG-AND chips.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND extended commands, badb block table autorefresh

Added extended commands for AG-AND device and added
option for BBT_AUTO_REFRESH.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] FTL Fix missing pointer assignment

For the case that mtd partitions are enabled it would cause a 0-pointer
dereferencing in mtdpart.c:mtd_erase_callback()

Signed-off-by: Herbert Valerio Riedel <hvr@inso.tuwien.ac.at>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] slram driver cleanup

Add error checks to read/write functions and add an eraseblock size.
Makes slram a suitable device for JFFS2.

Signed-off-by: Josh Boyer <jdub@us.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH] prevent NULL mmap in topdown model

Prevent the topdown allocator from allocating mmap areas all the way
down to address zero.

We still allow a MAP_FIXED mapping of page 0 (needed for various things,
ranging from Wine and DOSEMU to people who want to allow speculative
loads off a NULL pointer).

Tested by Chris Wright.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge ... /linux/kernel/git/gregkh/driver-2.6.git/

[PATCH] Avoid console spam with ext3 aborted journal.

Avoid console spam with ext3 aborted journal.

ext3 usually reports error conditions that it detects in its environment.
But when its journal gets aborted due to such errors, it can sometimes
continue to report that condition forever, spamming the console to such
an extent that the initial first cause of the journal abort can be lost.

When the journal aborts, we put the filesystem into readonly mode.  Most
subsequent filesystem operations will get rejected immediately by checks
for MS_RDONLY either in the filesystem or in the VFS.  But some paths do
not have such checks --- for example, if we continue to write to a file
handle that was opened before the fs went readonly.  (We only check for
the ROFS condition when the file is first opened.)  In these cases, we
can continue to generate log errors similar to

EXT3-fs error (device $DEV) in start_transaction: Journal has aborted

for each subsequent write.

There is really no point in generating these errors after the initial
error has been fully reported.  Specifically, if we're starting a
completely new filesystem operation, and the filesystem is *already*
readonly (ie. the ext3 layer has already detected and handled the
underlying jbd abort), and we see an EROFS error, then there is simply
no point in reporting it again.

Signed-off-by: Stephen Tweedie <sct@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Fix filp being passed through raw ioctl handler

Don't pass meaningless file handles to block device ioctls.

The recent raw IO ioctl-passthrough fix started passing the raw file
handle into the block device ioctl handler.  That's unlikely to be
useful, as the file handle is actually open on a character-mode raw
device, not a block device, so dereferencing it is not going to yield
useful results to a block device ioctl handler.

Previously we just passed NULL; also not a value that can usefully
be dereferenced, but at least if it does happen, we'll oops instead of
silently pretending that the file is a block device, so NULL is the more
defensive option here.  This patch reverts to that behaviour.

Noticed by Al Viro.

Signed-off-by: Stephen Tweedie <sct@redhat.com>
Acked-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Driver Core: remove driver model detach_state

The driver model has a "detach_state" mechanism that:

 - Has never been used by any in-kernel drive;
 - Is superfluous, since driver remove() methods can do the same thing;
 - Became buggy when the suspend() parameter changed semantics and type;
 - Could self-deadlock when called from certain suspend contexts;
 - Is effectively wasted documentation, object code, and headspace.

This removes that "detach_state" mechanism; net code shrink, as well
as a per-device saving in the driver model and sysfs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] Driver Core: pm diagnostics update, check for errors

This patch includes various tweaks in the messaging that appears during
system pm state transitions:

  * Warn about certain illegal calls in the device tree, like resuming
    child before parent or suspending parent before child.  This could
    happen easily enough through sysfs, or in some cases when drivers
    use device_pm_set_parent().

  * Be more consistent about dev_dbg() tracing ... do it for resume() and
    shutdown() too, and never if the driver doesn't have that method.

  * Say which type of system sleep state is being entered.

Except for the warnings, these only affect debug messaging.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: add MODALIAS to hotplug event for pci devices

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI: add modalias sysfs file for pci devices

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI Hotplug: remove pci_visit_dev

If my CPCI hotplug update patch is applied, then there are no longer any
in tree users of the pci_visit_dev API, and it and its related code can be
removed.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI Hotplug: CPCI update

[PATCH] CPCI: update

I have finally done some work to update the CompactPCI hotplug driver to
fix some of the outstanding issues in 2.6:
- Added adapter and latch status ops so that those files will get created
  by the current PCI hotplug core.  This used to not be required, but
  seems to be now after some of the sysfs rework in the core.
- Replaced slot list spinlock with a r/w semaphore to avoid any potential
  issues with sleeping.  This quiets all of the runtime warnings.
- Reworked interrupt driven hot extraction handling to remove need for a
  polling operator for ENUM# status.  There are a lot of boards that only
  have an interrupt driven by ENUM#, so this lowers the bar to entry.
- Replaced pci_visit_dev usage with better use of the PCI core functions.
  The new code is functionally equivalent to the previous code, but the
  use of pci_enable_device on insert needs to be investigated further, as
  I need to do some more testing to see if it is still necessary.

Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI Hotplug: get pciehp to work on the downstream port of a switch

Here is the updated patch to get pciehp driver to work for downstream
port of a switch and handle the difference in the offset value of PCI
Express capability list item of different ports.

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] PCI Hotplug: Fix echoing 1 to power file of enabled slot problem with SHPC driver

Here is a patch to fix the problem of echoing 1 to "power" file
to enabled slot causing the slot to power down, and echoing 0
to disabled slot causing shpchp_disabled_slot() to be called
twice. This problem was reported by kenji Kaneshige.

Thanks,
Dely

Signed-off-by: Dely Sy <dely.l.sy@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] fix memory scribble in arch/i386/pci/fixup.c

The GET_INDEX() macro should use just the low three bits of the devfn,
otherwise we have a memory scribble in pcie_rootport_aspm_quirk that
overwrites ptype_all

Fix it to be more careful about its arguments while at it.

Acked by Dely Sy <dely.l.sy@intel.com>

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] update CREDITS

free agent

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ppc32: enable use of early_param

We need to call parse_early_param() early on to allow usage of
early_param() for command line parsing.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge ... /linux/kernel/git/jgarzik/libata-2.6.git

Merge ... /linux/kernel/git/jgarzik/libata-dev.git

Merge ... /linux/kernel/git/gregkh/usb-2.6.git/

[PATCH] dvb: budget-av: CI fixes

- remove enable_ci, ci interface is assumed to be present if the saa7113
  is not found.
- reduce the delay when checking for saa7113
- clean up the cam reset according to specifications
- turn off Vcc to the cam slot if cam is removed or fails reset
- remove cam reset in ciintf_init
- clean up printks (KERN_)
- move gpio setting into saa7113_init
- clean up unreadable frontend_init
(Kenneth Aafloy)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: bt8xx: whitespace cleanup

whitespace cleanup

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: DST: fixed CI debug output

fixed CI debug output (Dominique Dumont)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: DST: fix a bug in the module parameter

fix a bug in the module parameter (Dominique Dumont)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: bt8xx: updated documentation

updated documentation (Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: DST: misc. fixes

removed unused module parameter session removed unnecesary delay for FTA cards
(Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: DST: fix for descrambling failure

fix for descrambling failure (Dominique Dumont, Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: DST: fixed tuning problem

fixed a tuning problem for cards based on the old firmware (Steffen Motzer,
Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: DST: add support for Twinhan 200103A

add support for the old Twinhan 200103A card (Steffen Motzer)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: DST: reorganize Twinhan DST driver to support CI

- reorganize Twinhan DST driver to support CI
- add support for more cards
(Manu Abraham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: bt8xx: update documentation

update bt8xx documentation (Uwe Bugla)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: modified dvb_register_adapter() to avoid kmalloc/kfree

Modified dvb_register_adapter() to avoid kmalloc/kfree.  Drivers have to embed
struct dvb_adapter into their private data struct from now on.  (Andreas
Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: frontends: misc. minor cleanups

misc. minor cleanups, select FW_LOADER and add a help text to DVB_OR51132

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: make needlessly global code static or drop it

- make needlessly global code static
- #if 0 the following unused global functions:
  - ttpci/av7110_hw.c: av7110_reset_arm
  - ttpci/av7110_hw.c: av7110_send_ci_cmd
- frontends/mt352.[ch]: drop mt352_read

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dvb-pll.h: prevent multiple inclusion

added missing #ifndef and #define to inhibit multiple inclusions (Patrick
Boettcher)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: tda10046: support for different firmware versions

added support for different tda10046 firmware versions.  tested with v20, v21
and v25.  (Andreas Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: tda1004x: allow N_I2C to be overridden by the card driver

allow N_I2C to be overridden by the card driver (Andreas Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: tda1004x: dont use bitfields

use simple u8 instead of bitfields (Andreas Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: mt352: embed struct mt352_config in mt352_state

copying the mt352_config-struct to mt352_state instead of storing just the
pointer to it (Patrick Boettcher)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: ves1820: remove unnecessary msleep

remove unnecessary msleep(10) in writereg (Tony Glader)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dib3000: add NULL pointer check

prevent NULL pointer related Oopses (Patrick Boettcher)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: remove unnecessary casts in frontends

remove unnecessary casts in frontends (Kenneth Aafloy)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: stv0299: fix FE_DISHNETWORK_SEND_LEGACY_CMD

fix the current stv0299 code that handles FE_DISHNETWORK_SEND_LEGACY_CMD.
(supports the legacy SW21, SW44, and SW64 switches)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: tda1004x: formatting cleanups

mostly formatting cleanups, no functional change (Andreas Oberritter)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: nxt6000: support frontend status reads

add support for read_ber, read_signal_strength and read_status (Greg Wickham)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: av7110: fix indentation

fix indentation

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: av7110: fix comment

fixed debugging instructions: av7110_debug -> debug (Oliver Endirss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: av7110: fix NTSC/PAL switching

fix NTSC -> PAL switching (std->id is a bitmap!) (Oliver Endriss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: av7110: fix VIDEO_SET_DISPLAY_FORMAT

VIDEO_SET_DISPLAY_FORMAT ioctl fixed:
set videostate.display_format, not videostate.video_format (Oliver Endriss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dvb_net: handle IPv6 and LLC/SNAP

handle IPv6 and LLC/SNAP (Bertrand Mazieres, Matthieu Castet, Johannes
Stezenbach)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: remove unnecessary casts in dvb-core

remove unnecessary casts in dvb-core (Kenneth Aafloy)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: add support for KNC-1 cards

Support KNC-1 Plus DVB-T and similar KNC-1 cards (Alexander Riedel)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: av7110: audio out fix

Switch analog output of the Crystal sound chip to left/stereo/right mode.
This will fix problems with some (most?) channels which do not encode
2-channel audio correctly.  (Oliver Endriss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: dvb_frontend: fix module param

Remove incorrect "dvb_"-prefix from parameter description.  Error detected
with section2text.rb, see autoparam patch.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: saa7146: no need to initialize static/global variables to 0

no need to initialize static/global variables to 0

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: support for TT/Hauppauge Nexus-S Rev 2.3

Support for TT/Hauppauge Nexus-S Rev 2.3 (Oliver Endriss)

Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: DiSeqC fix

Fixed DiSeqC switching, which was wrongly taking over from skystar2.c.  Thanks
to Joerg Riechardt for finding the bug and testing the Fix.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: i2c read fixes

rewrote the i2c-reading-part (no more ack-error ignoring, which was inherited
from the skystar2-driver)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: readme update

readme update

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: fix module refcount handling

Corrected the THIS_MODULE handling for the flexcop-stuff and dvb-usb which
lead to oopses because of misorganized module dependencies.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: use hw pid filter

- enabled the HW PID by default for the PCI cards

- correct the TS demux parsing when PID filter is enabled (and thus the
  timer IRQ)

- rewrote the PID-filter and FULLTS control part in flexcop-hw-filter
  (thanks to Krzysztof Matula for pointing that out)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: fixed interrupt-sharing

fixed interrupt-sharing and added a spinlock to the irq-callback
(thanks to Pascal Riekenberg)

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: fix MAC address reading

read MAC address directly into dvb_adapter->proposed_mac

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: add acknowledgements

add acknowledgements

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: flexcop: fix USB transfer handling

- driver receives many null TS packets (pid=0x1fff).  They occupy the
  limited USB bandwidth and this leads to loss of video packets.  Enabling the
  null packet filter fixes this.

- packets that flexcop sends to USB have a 2 byte header that has to be
  removed.

- sometimes a TS packet is split between different urbs.  These parts have
  to be combined in a temporary buffer.

Signed-off-by: Vadim Catana <skystar@moldova.cc>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: b2c2/flexcop driver refactoring part 2: add modular Flexcop driver

b2c2/flexcop driver refactoring to support PCI and USB based cards part 2: add
modular Flexcop driver

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dvb: b2c2/flexcop driver refactoring part 1: drop old b2c2-usb stuff

b2c2/flexcop driver refactoring to support PCI and USB based cards, part 1:
drop abandoned attempt to support USB devices

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ieee1394: fix premature expiry of async packets

Set the initial sendtime to be 10 seconds in the future, to avoid the packet
timing out while it's still queued to be sent.  This fixes furthur "no tlabel
match" problems caused by premature expiry.

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ieee1394: fix cross_bound check for null ISO packets

Fix cross_bound to not return 1 for zero-length regions.  Fixes regression
when sending null ISO packets.

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ieee1394: single buffer fixes to video1394

Apply and fixup patch from Markus Tavenrath <speedygoo@speedygoo.de> for
video1394 to allow only a single buffer on receive and two buffers on
transmit.  Tested with libdc1394 and dvconnect (libdv).

Signed-off-by: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ieee1394: drivers/ieee1394/pcilynx.c: Use the DMA_32BIT_MASK constant

Use the DMA_32BIT_MASK constant from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistent_dma_mask() These patches include
dma-mapping.h explicitly because it caused errors on some architectures
otherwise.  See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for
details

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] ieee1394: remove NULL checks for kfree

This patch removes redundant NULL pointer checks before kfree() in all of
drivers/ieee1394/

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>