perf_counter: Change data head from u32 to u64

Since some people worried that 4G might not be a large enough
as an mmap data window, extend it to 64 bit for capable
platforms.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: x86: Emulate longer sample periods

Do as Power already does, emulate sample periods up to 2^63-1 by
composing them of smaller values limited by hardware capabilities.
Only once we wrap the software period do we generate an overflow
event.

Just 10 lines of new code.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Remove the last nmi/irq bits

IRQ (non-NMI) sampling is not used anymore - remove the last few bits.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Rename various fields

A few renames:

  s/irq_period/sample_period/
  s/irq_freq/sample_freq/
  s/PERF_RECORD_/PERF_SAMPLE_/
  s/record_type/sample_type/

And change both the new sample_type and read_format to u64.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Add unique counter id

Stephan raised the issue that we currently cannot distinguish between
similar counters within a group (PERF_RECORD_GROUP uses the config
value as identifier).

Therefore, generate a new ID for each counter using a global u64
sequence counter.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86: Fix atomic_long_xchg() on 64bit

Apparently I'm the first to use it :-)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Remove the last nmi bits

Everything is nmi these days, remove the userspace bits so that
the kernel can drop the interface.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf report: Clean up the default output

 - extra space between columns
 - left-aligned the symbol column
 - moved the no-symbols printout to -v

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: tools: Better handle existing data files

Provide an argument (-f) to overwrite existing data files.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: tools: Expand the COMM,MMAP event synthesizer

Include code to pre-construct mappings based on /proc,
on system wide recording.

Fix the existing code to properly fill out ->pid and ->tid.

The PID should be the Thread Group ID (PIDTYPE_PID of task->group_leader)
The TID should be the Thread ID (PIDTYPE_PID of task)

Furthermore, change the default sorting of report to comm,dso for a
better quick overview.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Use PID namespaces properly

Stop using task_struct::pid and start using PID namespaces.

PIDs will be reported in the PID namespace of the monitoring
task at the moment of counter creation.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Remove unused prev_state field

This removes the prev_state field of struct perf_counter since
it is now unused.  It was only used by the cpu migration
counter, which doesn't use it any more.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.35052.915728.626374@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Fix cpu migration counter

This fixes the cpu migration software counter to count
correctly even when contexts get swapped from one task to
another.  Previously the cpu migration counts reported by perf
stat were bogus, ranging from negative to several thousand for
a single "lat_ctx 2 8 32" run.  With this patch the cpu
migration count reported for "lat_ctx 2 8 32" is almost always
between 35 and 44.

This fixes the problem by adding a call into the perf_counter
code from set_task_cpu when tasks are migrated.  This enables
us to use the generic swcounter code (with some modifications)
for the cpu migration counter.

This modifies the swcounter code to allow a NULL regs pointer
to be passed in to perf_swcounter_ctx_event() etc.  The cpu
migration counter does this because there isn't necessarily a
pt_regs struct for the task available.  In this case, the
counter will not have interrupt capability - but the migration
counter didn't have interrupt capability before, so this is no
loss.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.35006.819769.416327@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Initialize per-cpu context earlier on cpu up

This arranges for perf_counter's notifier for cpu hotplug
operations to be called earlier than the migration notifier in
sched.c by increasing its priority to 20, compared to the 10
for the migration notifier.  The reason for doing this is that
a subsequent commit to convert the cpu migration counter to use
the generic swcounter infrastructure will add a call into the
perf_counter subsystem when tasks get migrated.  Therefore the
perf_counter subsystem needs a chance to initialize its per-cpu
data for the new cpu before it can get called from the
migration code.

This also adds a comment to the migration notifier noting that
its priority needs to be lower than that of the perf_counter
notifier.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18981.1900.792795.836858@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Fix uninitialized variable in perf-report.c

# make prefix=/usr/local V=1
gcc -o builtin-report.o -c -O2 -ggdb3 -Wall -Werror -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement   -DSHA1_HEADER='<openssl/sha.h>'  builtin-report.c
cc1: warnings being treated as errors
builtin-report.c: In function ‘__cmd_report’:
builtin-report.c:626: error: ‘cwdlen’ may be used uninitialized in this function

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>

perf_counter tools: Cleanup Makefile

We currently build perf-stat/record etc, only to do nothing
with them.  We also install the perf binary in two places,
$prefix/bin and $perfexec_instdir, which appears to be for
binaries which perf would exec were a command not linked in.
Correct this, and comment out broken/incomplete targets dist
and coverage.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Make .gitignore reflect perf_counter tools files

Make .gitignore reflect perf_counter tools files so
git status doesn't gripe about untracked files.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Add missing rb_erase in dso__delete_symbols

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090601205057.GB7805@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Use hex2u64 in more places

This has also a nice side effect, tools built on newer systems such as
fedora 10 again work on systems with older versions of glibc:

My workstation:

[acme@doppio ~]$ rpm -q glibc.x86_64
glibc-2.9-3.x86_64

Test machine:

[acme@emilia ~]$ rpm -q glibc.x86_64
glibc-2.5-24

Before:

[acme@emilia ~]$ perf
perf: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by perf)
[acme@emilia ~]$ nm `which perf` | grep GLIBC_2\.7
                 U __isoc99_sscanf@@GLIBC_2.7
[acme@emilia ~]$

After:
[acme@emilia ~]$ perf
usage: perf [--version] [--help] COMMAND [ARGS]

The most commonly used perf commands are:
   record   Run a command and record its profile into perf.data
   report   Read perf.data (created by perf record) and display the
profile
   stat     Run a command and gather performance counter statistics
   top      Run a command and profile it

See 'perf help COMMAND' for more information on a specific command.
[acme@emilia ~]$ nm `which perf` | grep GLIBC_2\.7
[acme@emilia ~]$

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090601205019.GA7805@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Add string.[ch]

Add hex conversion libraries. We are going to replace sscanf()
uses with them.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Guard against record damaging existing files

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Tidy up style details

 - whitespace fixlets
 - make local variable definitions more consistent

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Allow software counters to count while task is not running

This changes perf_swcounter_match() so that per-task software
counters can count events that occur while their associated
task is not running.  This will allow us to use the generic
software counter code for counting task migrations, which can
occur while the task is not scheduled in.

To do this, we have to distinguish between the situations where
the counter is inactive because its task has been scheduled
out, and those where the counter is inactive because it is part
of a group that was not able to go on the PMU.  In the former
case we want the counter to count, but not in the latter case.
If the context is active, we have the latter case.  If the
context is inactive then we need to know whether the counter
was counting when the context was last active, which we can
determine by comparing its ->tstamp_stopped timestamp with the
context's timestamp.

This also folds three checks in perf_swcounter_match, checking
perf_event_raw(), perf_event_type() and perf_event_id()
individually, into a single 64-bit comparison on
counter->hw_event.config, as an optimization.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.34810.259718.955621@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Provide functions for locking and pinning the context for a task

This abstracts out the code for locking the context associated
with a task.  Because the context might get transferred from
one task to another concurrently, we have to check after
locking the context that it is still the right context for the
task and retry if not.  This was open-coded in
find_get_context() and perf_counter_init_task().

This adds a further function for pinning the context for a
task, i.e. marking it so it can't be transferred to another
task.  This adds a 'pin_count' field to struct
perf_counter_context to indicate that a context is pinned,
instead of the previous method of setting the parent_gen count
to all 1s.  Pinning the context with a pin_count is easier to
undo and doesn't require saving the parent_gen value.  This
also adds a perf_unpin_context() to undo the effect of
perf_pin_task_context() and changes perf_counter_init_task to
use it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.34748.755674.596386@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'linus' into perfcounters/core

Merge reason: merge almost-rc8 into perfcounters/core, which was -rc6
              based - to pick up the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Fix unknown command help text

Arjan reported this error when entering an unknown command to perf:

  $ perf start
  fatal: Uh oh. Your system reports no Git commands at all.

The Git code expects there to be perf-* commands - but since Perf
is a 'pure' utility with no dash commands anymore, this old assumption
of Git does not hold anymore. Remove that error check.

Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Generate per command manpages (and pdf/html, etc.)

Import Git's nice .txt => {man/html/pdf} generation machinery.

Fix various errors in the Documentation/perf*.txt description as well.

Also fix a bug in builtin-help: we'd map 'perf help top' to 'perftop'
if only the 'perf' binary is in the default PATH - confusing the manpage
logic. I dont fully understand why Git did it this way - but i suppose
it's a migration artifact from their migration from standalone git-xyz
commands to 'git xyz' commands. The perf tools were always using the
modern form so it's not an issue there.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Fix 'make install'

'make install' didnt install perf itself - which needs a special
rule to be copied to bindir.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Print 'CPU utilization factor' in builtin-stat

Before:

 Performance counter stats for '/home/mingo/hackbench':

    5728.862689  task clock ticks     (msecs)
          34426  context switches     #        0.006 M/sec
           3835  CPU migrations       #        0.001 M/sec
          18158  pagefaults           #        0.003 M/sec
    16218109156  CPU cycles           #     2830.947 M/sec
    13519616840  instructions         #     2359.913 M/sec
       55941661  cache references     #        9.765 M/sec
       23554938  cache misses         #        4.112 M/sec

 Wall-clock time elapsed:   528.886980 msecs

After:

 Performance counter stats for '/home/mingo/hackbench':

    5845.443541  task clock ticks     #      11.886 CPU utilization factor
          38289  context switches     #       0.007 M/sec
           4208  CPU migrations       #       0.001 M/sec
          17755  pagefaults           #       0.003 M/sec
    16664668576  CPU cycles           #    2850.882 M/sec
    13468113991  instructions         #    2304.036 M/sec
       57445468  cache references     #       9.827 M/sec
       26896502  cache misses         #       4.601 M/sec

 Wall-clock time elapsed:   491.802357 msecs

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Add locking to perf top

perf_counter tools: Add locking to perf top

We need to protect the active_symbols list as two threads change it:
the main thread adding entries to the head and the display thread
decaying entries from any place in the list.

Also related: take a snapshot of syme->count[0] before using it to
calculate the weight and to show the same number used in this calc when
displaying the symbol usage.

Reported-by: Mike Galbraith <efault@gmx.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090529200307.GR4747@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Shorten the DSO names using cwd

[acme@emilia linux-2.6-tip]$ pwd
/home/acme/git/linux-2.6-tip

Before (still available using -P/--full-paths)

[acme@emilia linux-2.6-tip]$ perf report -P | head -10
    11.48%             perf: 7454 [kernel]: clear_page_c
     4.89%             perf: 7454 [kernel]: vsnprintf
     4.61%             perf: 7454 /home/acme/git/linux-2.6-tip/Documentation/perf_counter/perf: dso__find_symbol
     4.09%             perf: 7454 [kernel]: number
     4.06%             perf: 7454 /home/acme/git/linux-2.6-tip/Documentation/perf_counter/perf: dso__fprintf
     4.00%             perf: 7454 /home/acme/git/linux-2.6-tip/Documentation/perf_counter/perf: symbol_filter

New default:

[acme@emilia linux-2.6-tip]$ perf report | head -10
    11.48%             perf: 7454 [kernel]: clear_page_c
     4.89%             perf: 7454 [kernel]: vsnprintf
     4.61%             perf: 7454 ./Documentation/perf_counter/perf: dso__find_symbol
     4.09%             perf: 7454 [kernel]: number
     4.06%             perf: 7454 ./Documentation/perf_counter/perf: dso__fprintf
     4.00%             perf: 7454 ./Documentation/perf_counter/perf: symbol_filter

Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090529164859.GN4747@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge git://git.infradead.org/~dwmw2/mtd-2.6.30

* git://git.infradead.org/~dwmw2/mtd-2.6.30:
  jffs2: Fix corruption when flash erase/write failure
  mtd: MXC NAND driver fixes (v5)

Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  Revert "USB: Correct Makefile to make isp1760 buildable"
  usb-serial: fix crash when sub-driver updates firmware
  USB: isp1760: urb_dequeue doesn't always find the urbs
  USB: Yet another Conexant Clone to add to cdc-acm.c
  USB: atmel_usb_udc: Use kzalloc() to allocate ep structures
  USB: atmel-usba-udc : fix control out requests.

Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Driver Core: do not oops when driver_unregister() is called for unregistered drivers
  sysfs: file.c: use create_singlethread_workqueue()

Merge branch 'for-2.6.30' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux:
  svcrdma: dma unmap the correct length for the RPCRDMA header page.
  nfsd: Revert "svcrpc: take advantage of tcp autotuning"
  nfsd: fix hung up of nfs client while sync write data to nfs server

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: libps2 - better handle bad scheduler decisions
  Input: usb1400_ts - fix access to "device data" in resume function
  Input: multitouch - augment event semantics documentation
  Input: multitouch - add tracking ID to the protocol

Merge branch 'drm-intel-next' of git://git./linux/kernel/git/anholt/drm-intel

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  i915: Set object to gtt domain when faulting it back in
  drm/i915: Apply a big hammer to 865 GEM object CPU cache flushing.
  drm/i915: Fix tiling pitch handling on 8xx.

Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Compaq Presario CQ60 patching for Conexant
  sound: usb-audio: make the MotU Fastlane work again
  ALSA: Enable PCM hw_ptr_jiffies check only in xrun_debug mode
  ALSA: Fix invalid jiffies check after pause

8250: Fix oops from setserial

If you setserial a port which has never been initialised we change the type
but don't update the I/O method pointers. The same problem is true if you
change the io type of a port - but nobody ever does that so nobody noticed!

Remember the old type and when attaching if the type has changed reload the
port accessor pointers. We can't do it blindly as some 8250 drivers load custom
accessors and we must not stomp those.

Tested-by: Victor Seryodkin <vvscore@gmail.com>
Closes-bug: #13367
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: AMD8111 & AMD8131 Kconfig fixup

The amd8111_edac.c driver will fail allmodconfig on architectures other
than PPC, introduce Kconfig dependency to avoid this, since both AMD8111
and AMD8131 chips are only adopted on Maple so far.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

edac: AMD8111 & AMD8131 use dev_name()

The "bus_id" member in the device structure has been obsolete, use
dev_name() instead.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: fix build warning and avoid checking for mem != null again and again

Fix build warning, "mem_cgroup_is_obsolete defined but not used" when
CONFIG_DEBUG_VM is not set.  Also avoid checking for !mem again and again.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: account for MAP_SHARED mappings using VM_MAYSHARE and not VM_SHARED in hugetlbfs

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302

hugetlbfs reserves huge pages but does not fault them at mmap() time to
ensure that future faults succeed.  The reservation behaviour differs
depending on whether the mapping was mapped MAP_SHARED or MAP_PRIVATE.
For MAP_SHARED mappings, hugepages are reserved when mmap() is first
called and are tracked based on information associated with the inode.
Other processes mapping MAP_SHARED use the same reservation.  MAP_PRIVATE
track the reservations based on the VMA created as part of the mmap()
operation.  Each process mapping MAP_PRIVATE must make its own
reservation.

hugetlbfs currently checks if a VMA is MAP_SHARED with the VM_SHARED flag
and not VM_MAYSHARE.  For file-backed mappings, such as hugetlbfs,
VM_SHARED is set only if the mapping is MAP_SHARED and the file was opened
read-write.  If a shared memory mapping was mapped shared-read-write for
populating of data and mapped shared-read-only by other processes, then
hugetlbfs would account for the mapping as if it was MAP_PRIVATE.  This
causes processes to fail to map the file MAP_SHARED even though it should
succeed as the reservation is there.

This patch alters mm/hugetlb.c and replaces VM_SHARED with VM_MAYSHARE
when the intent of the code was to check whether the VMA was mapped
MAP_SHARED or MAP_PRIVATE.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <starlight@binnacle.cx>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86: ignore VM_LOCKED when determining if hugetlb-backed page tables can be shared or not

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302

On x86 and x86-64, it is possible that page tables are shared beween
shared mappings backed by hugetlbfs.  As part of this,
page_table_shareable() checks a pair of vma->vm_flags and they must match
if they are to be shared.  All VMA flags are taken into account, including
VM_LOCKED.

The problem is that VM_LOCKED is cleared on fork().  When a process with a
shared memory segment forks() to exec() a helper, there will be shared
VMAs with different flags.  The impact is that the shared segment is
sometimes considered shareable and other times not, depending on what
process is checking.

What happens is that the segment page tables are being shared but the
count is inaccurate depending on the ordering of events.  As the page
tables are freed with put_page(), bad pmd's are found when some of the
children exit.  The hugepage counters also get corrupted and the Total and
Free count will no longer match even when all the hugepage-backed regions
are freed.  This requires a reboot of the machine to "fix".

This patch addresses the problem by comparing all flags except VM_LOCKED
when deciding if pagetables should be shared or not for hugetlbfs-backed
mapping.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <starlight@binnacle.cx>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_lcdfb: correct fifo size for some products

Remove wrong fifo size definition for some AT91 products.

Due to a misunderstanding of some AT91 datasheets, a fifo size of 2048
(words) has been introduced by mistake.  In fact, all products (AT91/AT32)
are sharing the same fifo size of 512 words.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

S3C-fb: PM fix

Correctly restore the FrameBuffer register state in the resume function.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial: 8250_gsc: fix printk format error

drivers/serial/8250_gsc.c:44: warning: format '%lx' expects type
'long unsigned int', but argument 2 has type 'resource_size_t'

[akpm@linux-foundation.org: fix it to handle u64's]
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

parport_gsc: fix printk format error

drivers/parport/parport_gsc.c:356: warning: format '%lx' expects type
'long unsigned int', but argument 2 has type 'resource_size_t'

[akpm@linux-foundation.org: fix it to handle u64's]
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

flat: fix data sections alignment

The flat loader uses an architecture's flat_stack_align() to align the
stack but assumes word-alignment is enough for the data sections.

However, on the Xtensa S6000 we have registers up to 128bit width
which can be used from userspace and therefor need userspace stack and
data-section alignment of at least this size.

This patch drops flat_stack_align() and uses the same alignment that
is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's
not defined by the architecture.

It also fixes m32r which was obviously kaput, aligning an
uninitialized stack entry instead of the stack pointer.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Oskar Schirmer <os@emlix.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Johannes Weiner <jw@emlix.com>
Acked-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: change email address for Thomas Dahlmann

Signed-off-by: Thomas <dahlmann.thomas@arcor.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/serial/mpc52xx_uart.c: fix array overindexing check

The check for an overindexing of mpc52xx_uart_{ports,nodes} has an
off-by-one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: fix deadlock between lock_page_cgroup and mapping tree_lock

mapping->tree_lock can be acquired from interrupt context.  Then,
following dead lock can occur.

Assume "A" as a page.

 CPU0:
       lock_page_cgroup(A)
interrupted
-> take mapping->tree_lock.
 CPU1:
       take mapping->tree_lock
-> lock_page_cgroup(A)

This patch tries to fix above deadlock by moving memcg's hook to out of
mapping->tree_lock.  charge/uncharge of pagecache/swapcache is protected
by page lock, not tree_lock.

After this patch, lock_page_cgroup() is not called under mapping->tree_lock.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

procfs: make errno values consistent when open pident vs exit(2) race occurs

proc_pident_instantiate() has following call flow.

proc_pident_lookup()
  proc_pident_instantiate()
    proc_pid_make_inode()

And, proc_pident_lookup() has following error handling.

const struct pid_entry *p, *last;
error = ERR_PTR(-ENOENT);
if (!task)
goto out_no_task;

Then, proc_pident_instantiate should return ENOENT too when racing against
exit(2) occur.

EINAL has two bad reason.
  - it implies caller is wrong. bad the race isn't caller's mistake.
  - man 2 open don't explain EINVAL. user often don't handle it.

Note: Other proc_pid_make_inode() caller already use ENOENT properly.

Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cred: #include init.h in cred.h

linux/cred.h can't be included as first header (alphabetical order)
because it uses __init which is enough to break compilation on some archs.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom: fix possible oom_dump_tasks NULL pointer

When /proc/sys/vm/oom_dump_tasks is enabled, it is possible to get a NULL
pointer for tasks that have detached mm's since task_lock() is not held
during the tasklist scan.  Add the task_lock().

Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: pair EDAC-E752X P: and M: entries

Entries should be P: name then M: email address.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

perf_counter: Ammend cleanup in fork() fail

When fork() fails we cannot use perf_counter_exit_task() since that
assumes to operate on current. Write a new helper that cleans up
unused/clean contexts.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Clean up task_ctx vs interrupts

Remove the local_irq_save() etc.. in routines that are smp function
calls, or have IRQs disabled by other means.

Then change the COMM, MMAP, and swcounter context iteration to
current->perf_counter_ctxp and RCU, since it really doesn't matter
which context they iterate, they're all folded.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Fix COMM and MMAP events for cpu wide counters

Commit a63eaf34ae6 ("perf_counter: Dynamically allocate tasks'
perf_counter_context struct") broke COMM and MMAP notification for
cpu wide counters by dropping out early if there was no task context,
thereby also not iterating the cpu context.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Robustify counter-free logic

This fixes a nasty crash and highlights a bug that we were
freeing failed-fork() counters incorrectly.

(the fix for that will come separately)

[ Impact: fix crashes/lockups with inherited counters ]

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Fix cpuctx->task_ctx races

Peter noticed that we are sometimes reading cpuctx->task_ctx with
interrupts enabled.

Noticed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

jffs2: Fix corruption when flash erase/write failure

Erase errors such as:
"Newly-erased block contained word 0xa4ef223e at offset 0x0296a014"
and failure to write the clean marker,
moves the offending erase block to erasing list before calling
jffs2_erase_failed(). This is bad as jffs2_erase_failed() will
also move the block to the bad_list, but is now moving the
wrong block, causing FS corruption.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

mtd: MXC NAND driver fixes (v5)

The following patch fixes:
 - re-initialization of host->col_addr which is used as byte index
   between the successive READID flash commands.
 - compile error when CONFIG_PM is enabled
 - pass on the error code from clk_get()
 - return -ENOMEM in case of failed ioremap()
 - pass on the return value of platform_driver_probe() directly
 - remove excessive printk
 - let command line partition table parsing with mxc_nand name.
   The cmd_line parsing is done via <mtd-id> name that differs
   from mxc_nand by default and looks like "NAND 256MiB 1,8V 8-bit"

Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

perf_counter: Don't swap contexts containing locked mutex

Peter Zijlstra pointed out that under some circumstances, we can take
the mutex in a context or a counter and then swap that context or
counter to another task, potentially leading to lock order inversions
or the mutexes not protecting what they are supposed to protect.

This fixes the problem by making sure that we never take a mutex in a
context or counter which could get swapped to another task.  Most of
the cases where we take a mutex is on a top-level counter or context,
i.e. a counter which has an fd associated with it or a context that
contains such a counter.  This adds WARN_ON_ONCE statements to verify
that.

The two cases where we need to take the mutex on a context that is a
clone of another are in perf_counter_exit_task and
perf_counter_init_task.  The perf_counter_exit_task case is solved by
uncloning the context before starting to remove the counters from it.
The perf_counter_init_task is a little trickier; we temporarily
disable context swapping for the parent (forking) task by setting its
ctx->parent_gen to the all-1s value after locking the context, if it
is a cloned context, and restore the ctx->parent_gen value at the end
if the context didn't get uncloned in the meantime.

This also moves the increment of the context generation count to be
within the same critical section, protected by the context mutex, that
adds the new counter to the context.  That way, taking the mutex is
sufficient to ensure that both the counter list and the generation
count are stable.

[ Impact: fix hangs, races with inherited and PID counters ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18975.31580.520676.619896@drongo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Also display time-normalized stat results

Add new column that normalizes counter results by
'nanoseconds spent running' unit.

Before:

 Performance counter stats for '/home/mingo/hackbench':

   10469.403605  task clock ticks     (msecs)
          75502  context switches     (events)
           9501  CPU migrations       (events)
          36158  pagefaults           (events)
    31975676185  CPU cycles           (events)
    26257738659  instructions         (events)
      108740581  cache references     (events)
       54606088  cache misses         (events)

 Wall-clock time elapsed:   810.514504 msecs

After:

 Performance counter stats for '/home/mingo/hackbench':

   10469.403605  task clock ticks     (msecs)
          75502  context switches     #        0.007 M/sec
           9501  CPU migrations       #        0.001 M/sec
          36158  pagefaults           #        0.003 M/sec
    31975676185  CPU cycles           #     3054.202 M/sec
    26257738659  instructions         #     2508.045 M/sec
      108740581  cache references     #       10.387 M/sec
       54606088  cache misses         #        5.216 M/sec

 Wall-clock time elapsed:   810.514504 msecs

The advantage of that column is that it is characteristic of the
execution workflow, regardless of runtime. Hence 'hackbench 10'
will look similar to 'hackbench 15' - while the absolute counter
values are very different.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Split display into reading and printing

We introduce the extra pass to allow the print-out to possibly
rely on already read counters.

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Clean up builtin-stat.c's do_perfstat()

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter/x86: Always use NMI for performance-monitoring interrupt

Always use NMI for performance-monitoring interrupt as there could be
racy situations if we switch between irq and nmi mode frequently.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
LKML-Reference: <20090529052835.GA13657@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Fix top symbol table max_ip typo

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Fix top symbol table dump typo

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Document '--' option parsing terminator

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Convert builtin-top to use libperf symbol routines

Now both perf top and report use the same routines.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090528175541.GG4747@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Optionally pass a symbol filter to the dso load routines

Will be used by perf top.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090528175526.GF4747@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Consolidate dso methods to load kernel symbols

Now one has just to use dso__load_kernel() optionally passing a vmlinux
filename.

Will make things easier for perf top that will want to pass a callback
to filter some symbols.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: struct symbol priv area

When creating a dso instance allow asking that all symbols in this dso
have a private area just before the symbol.

perf top will use this for its counters, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090528175513.GD4747@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: Move symbol resolution classes from report to libperf

Will be used by perf top as well.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090528175504.GC4747@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Driver Core: do not oops when driver_unregister() is called for unregistered drivers

We also fix a problem with cleaning up properly when initializing
drivers and devices, so checks like this will work successfully.

Portions of the patch by Linus and Greg and Ingo.

Reported-by: Ozan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

sysfs: file.c: use create_singlethread_workqueue()

We don't need a kernel thread per CPU for this application.

Acked-by: Alex Chiang <achiang@hp.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Revert "USB: Correct Makefile to make isp1760 buildable"

This reverts commit 26e1287594864169577327fef233befc9739be3b.

A larger patch (f7e7aa585) a few days after this one added the same line
to the Makefile, but in a different place.  While it'd be more correct to
revert that one, it's easier to revert this one because this is a
one-liner.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Greg Kroah-Hartman <gregkh@suse.de>
CC: linux-usb@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

usb-serial: fix crash when sub-driver updates firmware

This patch (as1244) fixes a crash in usb-serial that occurs when a
sub-driver returns a positive value from its attach method, indicating
that new firmware was loaded and the device will disconnect and
reconnect.  The usb-serial core then skips the step of registering the
port devices; when the disconnect occurs, the attempt to unregister
the ports fails dramatically.

This problem shows up with Keyspan devices and it might affect others
as well.

When the attach method returns a positive value, the patch sets
num_ports to 0.  This tells usb_serial_disconnect() not to try
unregistering any of the ports; instead they are cleaned up by
destroy_serial().

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: isp1760: urb_dequeue doesn't always find the urbs

The option driver (and presumably others) allocates several URBs when it
opens and tries to free them when it closes. The isp1760_urb_dequeue
function gets called, but the packet being dequeued is not necessarily at
the
front of one of the 32 queues. If not, the isp1760_urb_done function doesn't
get called for the URB and the process trying to free it hangs forever on a
wait_queue. This patch does two things. If the URB being dequeued has others
queued behind it, it re-queues them. And it searches the queues looking for
the URB being dequeued rather than just looking at the one at the front of
the queue.

[bigeasy@linutronix] whitespace fixes, reformating

Cc: stable <stable@kernel.org>
Signed-off-by: Warren Free <wfree@ipmn.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: Yet another Conexant Clone to add to cdc-acm.c

This patch adds another quirky Conexant USB Modem Clone to usb cdc-acm.c

Signed-off-by: Xiao Kaijian <xiaokj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: atmel_usb_udc: Use kzalloc() to allocate ep structures

This ensures that all fields are properly initialized.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: atmel-usba-udc : fix control out requests.

usbtest #14 was failing with "udc: ep0: TXCOMP: Invalid endpoint state 2, halting endpoint..."
This occured since ep0 is bidirectional and ep->is_in is not valid (must always use ep->state)

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Input: libps2 - better handle bad scheduler decisions

Sometimes devices send us their responses in time but due to
unfortunate scheduling decisions the receiving thread does not
get scheduled till much later and we erroneously decide that
device timed out. Work around this problem by checking whether we
received the data we needed instead of checking timeout
condition.

Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

perf_counter: Fix race in attaching counters to tasks and exiting

Commit 564c2b21 ("perf_counter: Optimize context switch between
identical inherited contexts") introduced a race where it is possible
that a counter being attached to a task could get attached to the
wrong task, if the task is one that has inherited its context from
another task via fork.  This happens because the optimized context
switch could switch the context to another task after find_get_context
has read task->perf_counter_ctxp.  In fact, it's possible that the
context could then get freed, if the other task then exits.

This fixes the problem by protecting both the context switch and the
critical code in find_get_context with spinlocks.  The context switch
locks the cxt->lock of both the outgoing and incoming contexts before
swapping them.  That means that once code such as find_get_context
has obtained the spinlock for the context associated with a task,
the context can't get swapped to another task.  However, the context
may have been swapped in the interval between reading
task->perf_counter_ctxp and getting the lock, so it is necessary to
check and retry.

To make sure that none of the contexts being looked at in
find_get_context can get freed, this changes the context freeing code
to use RCU.  Thus an rcu_read_lock() is sufficient to ensure that no
contexts can get freed.  This part of the patch is lifted from a patch
posted by Peter Zijlstra.

This also adds a check to make sure that we can't add a counter to a
task that is exiting.

There is also a race between perf_counter_exit_task and
find_get_context; this solves the race by moving the get_ctx that
was in perf_counter_alloc into the locked region in find_get_context,
so that once find_get_context has got the context for a task, it
won't get freed even if the task calls perf_counter_exit_task.  It
doesn't matter if new top-level (non-inherited) counters get attached
to the context after perf_counter_exit_task has detached the context
from the task.  They will just stay there and never get scheduled in
until the counters' fds get closed, and then perf_release will remove
them from the context and eventually free the context.

With this, we are now doing the unclone in find_get_context rather
than when a counter was added to or removed from a context (actually,
we were missing the unclone_ctx() call when adding a counter to a
context).  We don't need to unclone when removing a counter from a
context because we have no way to remove a counter from a cloned
context.

This also takes out the smp_wmb() in find_get_context, which Peter
Zijlstra pointed out was unnecessary because the cmpxchg implies a
full barrier anyway.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18974.33033.667187.273886@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'fix/hda' into for-linus

* fix/hda:
  ALSA: hda - Compaq Presario CQ60 patching for Conexant

perf_counter tools: report: Add help text for --sort

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter tools: report: Implement header output for --sort variants

Implement this style of header:

 #
 # Overhead          Command       File: Symbol
 # ........          .......       ............
 #

for the various --sort variants as well.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: Fix perf_counter_init_task() on !CONFIG_PERF_COUNTERS

Pointed out by compiler warnings:

   tip/include/linux/perf_counter.h:644: warning: no return statement in function returning non-void

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

ALSA: hda - Compaq Presario CQ60 patching for Conexant

A docking mic control is shown by default. The Compaq Presario
CQ60 laptop has no docking connector, so designate it as a
CXT5051_HP model.
This makes the phantom mixer slider disappear.

Signed-off-by: Tony Vroon <tony@linx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

svcrdma: dma unmap the correct length for the RPCRDMA header page.

The svcrdma module was incorrectly unmapping the RPCRDMA header page.
On IBM pserver systems this causes a resource leak that results in
running out of bus address space (10 cthon iterations will reproduce it).
The code was mapping the full page but only unmapping the actual header
length.  The fix is to only map the header length.

I also cleaned up the use of ib_dma_map_page() calls since the unmap
logic always uses ib_dma_unmap_single().  I made these symmetrical.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

nfsd: Revert "svcrpc: take advantage of tcp autotuning"

This reverts commit 47a14ef1af48c696b214ac168f056ddc79793d0e "svcrpc:
take advantage of tcp autotuning", which uncovered some further problems
in the server rpc code, causing significant performance regressions in
common cases.

We will likely reinstate this patch after releasing 2.6.30 and applying
some work on the underlying fixes to the problem (developed by Trond).

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Olga Kornievskaia <aglo@citi.umich.edu>
Cc: Jim Rees <rees@umich.edu>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

nfsd: fix hung up of nfs client while sync write data to nfs server

Commit 'Short write in nfsd becomes a full write to the client'
(31dec2538e45e9fff2007ea1f4c6bae9f78db724) broken the sync write.
With the following commands to reproduce:

  $ mount -t nfs -o sync 192.168.0.21:/nfsroot /mnt
  $ cd /mnt
  $ echo aaaa > temp.txt

Then nfs client is hung up.

In SYNC mode the server alaways return the write count 0 to the
client. This is because the value of host_err in nfsd_vfs_write()
will be overwrite in SYNC mode by 'host_err=nfsd_sync(file);',
and then we return host_err(which is now 0) as write count.

This patch fixed the problem.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

pref_counter: tools: report: Robustify in case of weird events

This error condition:

  aldebaran:~/linux/linux/Documentation/perf_counter> perf report
  dso__load_sym: cannot get elf header.
  failed to open: /etc/ld.so.cache
  problem processing PERF_EVENT_MMAP, bailing out

caused the profile to be very short - as the error was at the beginning
of the file and we bailed out completely.

Be more permissive and consider the event broken instead.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

i915: Set object to gtt domain when faulting it back in

When a GEM object is evicted from the GTT we set it to the CPU domain,
as it might get swapped in and out or ever mmapped regularly.  If the
object is mmapped through the GTT it can still get evicted in this way
by other objects requiring GTT space.  When the GTT mapping is touched
again we fault it back into the GTT, but fail to set it back to the
GTT domain.  This means we fail to flush any cached CPU writes to the
pages backing the object which will then happen "eventually", typically
after we write to the page through the uncached GTT mapping.

[anholt: Note that userland does do a set_domain(GTT, GTT) when starting
to access the GTT mapping.  That covers getting the existing mapping of the
object synchronized if it's bound to the GTT.  But set_domain(GTT, GTT)
doesn't do anything if the object is currently unbound.  This fix covers the
transition to being bound for GTT mapping.]

Fixes glyph and other pixmap corruption during swapping.  fd.o bug #21790

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

pref_counter: tools: report: Add header printout & prettify

Old default output:

 3.12%    perf-report [.] ./perf-report:       dsos__find
 2.44%    perf-report [k] kernel:              kallsyms_expand_symbol
 2.28%          :4483 [.] <unknown>:           <unknown>
 2.05%          :4174 [k] kernel:              _spin_lock_irqsave
 2.01%    perf-report [k] kernel:              vsnprintf
 1.92%    perf-report [k] kernel:              format_decode
 1.92%          :4438 [k] kernel:              _spin_lock

New default output:

 #
 # Overhead          Command       File: Symbol
 # ........          .......       ............
 #
      6.54%             perf  [k]  kernel: kallsyms_expand_symbol
      6.26%             perf  [.]  /home/mingo/tip/Documentation/perf_counter/perf: dso__insert_symbol
      4.76%             perf  [.]  /home/mingo/tip/Documentation/perf_counter/perf: hex2long
      4.55%             perf  [k]  kernel: number
      4.48%             perf  [k]  kernel: format_decode
      4.09%             perf  [k]  kernel: vsnprintf

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090527182101.229504802@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

pref_counter: tools: report: Add dso sorting

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090527182101.229504802@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

perf_counter: tools: report: Add comm sorting

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090527182101.129302022@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

pref_counter: tools: report: Add --sort option

option parsing for dynamic sorting.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090527182101.041817692@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>