GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
16 years agoALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver
Jarkko Nikula [Thu, 9 Oct 2008 12:57:22 +0000 (15:57 +0300)]
ALSA: ASoC: OMAP: Add multilink support to McBSP DAI driver

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Make TLV320AIC26 user-visible
Mark Brown [Fri, 10 Oct 2008 11:32:16 +0000 (12:32 +0100)]
ALSA: ASoC: Make TLV320AIC26 user-visible

The TLV320AIC26 Kconfig option is unusual in that it supports the
OpenFirmware machine driver which doesn't have a hard binding to the
codec driver but discovers the codec via the device tree.  This makes it
meaningful to select the codec without a machine driver.

Ideally there would be a proxy entry so that this option was only
visible on OpenFirmware systems.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC - clean up Kconfig for TLV320AIC2
Takashi Iwai [Fri, 10 Oct 2008 06:26:57 +0000 (08:26 +0200)]
ALSA: ASoC - clean up Kconfig for TLV320AIC2

Removed unnecessary dependency.  Also, make it uninteractive, as it's
only for selection by other configs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Make WM8510 microphone input a DAPM mixer
Mark Brown [Tue, 7 Oct 2008 15:13:50 +0000 (16:13 +0100)]
ALSA: ASoC: Make WM8510 microphone input a DAPM mixer

The WM8510 microphone input PGA was represented as a DAPM PGA but in
DAPM terms the functionality is that of a mixer since it takes three
switchable inputs and produces one output. Representing it as an input
was causing its controls to be misinterpreted as gain controls and
would cause some required DAPM updates to be missed.

Reported-by: Jukka Hynninen <ext-jukka.hynninen@vaisala.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Implement WM8510 bias level control
Mark Brown [Tue, 7 Oct 2008 12:04:58 +0000 (13:04 +0100)]
ALSA: ASoC: Implement WM8510 bias level control

The WM8510 bias level configuration blindly overwrites the power
management registers, interfering with the operation of DAPM.
Only adjust the specific bits required, implementing use of the VMID
resistor string configuration control as we go.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Remove unused AUDIO_NAME define from codec drivers
Jarkko Nikula [Tue, 7 Oct 2008 11:49:22 +0000 (14:49 +0300)]
ALSA: ASoC: Remove unused AUDIO_NAME define from codec drivers

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: tlv320aic3x: Use uniform tlv320aic naming
Jarkko Nikula [Tue, 7 Oct 2008 11:49:23 +0000 (14:49 +0300)]
ALSA: ASoC: tlv320aic3x: Use uniform tlv320aic naming

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Add WM8510 SPI support
Mark Brown [Tue, 7 Oct 2008 10:56:20 +0000 (11:56 +0100)]
ALSA: ASoC: Add WM8510 SPI support

Implement SPI support for WM8510, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Add WM8753 SPI support
Mark Brown [Mon, 6 Oct 2008 15:54:34 +0000 (16:54 +0100)]
ALSA: ASoC: Add WM8753 SPI support

Implement SPI support for WM8753, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Add custom SOC_SINGLE_TLV for tlv320aic23 codec
Arun KS [Fri, 3 Oct 2008 11:37:30 +0000 (17:07 +0530)]
ALSA: ASoC: Add custom SOC_SINGLE_TLV for tlv320aic23 codec

Replaces SOC_ENUM with custom SOC_SINGLE_TLV for Sidetone volume

Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Add DSP DAI format support to the OMAP McBSP driver
Arun KS [Thu, 2 Oct 2008 09:37:06 +0000 (15:07 +0530)]
ALSA: ASoC: Add DSP DAI format support to the OMAP McBSP driver

Enables DSP DAI format for McBSP in OMAP platform driver

Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Add support for osk5912
Arun KS [Thu, 2 Oct 2008 09:32:45 +0000 (15:02 +0530)]
ALSA: ASoC: Add support for osk5912

Adding ASoC machine driver for osk5912

Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Add TLV320AIC23 codec driver
Arun KS [Thu, 2 Oct 2008 09:15:49 +0000 (14:45 +0530)]
ALSA: ASoC: Add TLV320AIC23 codec driver

ASoC codec driver for TLV320AIC23 device

Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Use snd_soc_dapm_nc_pin() in N810 machine driver
Mark Brown [Sat, 27 Sep 2008 09:48:31 +0000 (10:48 +0100)]
ALSA: ASoC: Use snd_soc_dapm_nc_pin() in N810 machine driver

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Use snd_soc_dapm_nc_pin() in Zaurus machine drivers
Mark Brown [Sat, 27 Sep 2008 09:45:09 +0000 (10:45 +0100)]
ALSA: ASoC: Use snd_soc_dapm_nc_pin() in Zaurus machine drivers

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC Blackfin: fix bug - Audio Latency on AD1981 with MMAP enabled
Cliff Cai [Sat, 27 Sep 2008 14:32:20 +0000 (22:32 +0800)]
ALSA: ASoC Blackfin: fix bug - Audio Latency on AD1981 with MMAP enabled

With MMAP enabled (DMA mode) on the AD1981, there is +/- 250ms of delay between
writing data to alsa and audio starts coming out of the AD1981.

Copy more data to local buffer before starting DMA

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC Blackfin: add asoc ad73311 driver supporting in Blackfin boards
Cliff Cai [Sat, 27 Sep 2008 14:31:21 +0000 (22:31 +0800)]
ALSA: ASoC Blackfin: add asoc ad73311 driver supporting in Blackfin boards

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC Blackfin: add I2S DAI support for AD73311
Cliff Cai [Sat, 27 Sep 2008 14:30:15 +0000 (22:30 +0800)]
ALSA: ASoC Blackfin: add I2S DAI support for AD73311

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC codec: AD73311 audio codec driver
Cliff Cai [Sat, 27 Sep 2008 08:57:26 +0000 (16:57 +0800)]
ALSA: ASoC codec: AD73311 audio codec driver

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Remove references to Endrelia ETI-B1 board
Frank Mandarino [Tue, 30 Sep 2008 14:42:40 +0000 (10:42 -0400)]
ALSA: ASoC: Remove references to Endrelia ETI-B1 board

The ASoC machine drivers for this board were only provided as examples
for the new AT91 ASoC platform driver.  Since the ETI-B1 board is
proprietary and there are other AT91 ASoC machine drivers available,
it makes sense to remove these drivers.

Signed-off-by: Frank Mandarino <fmandarino@endrelia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Use snd_soc_dapm_nc_pin() in GTA01 audio driver
Mark Brown [Wed, 24 Sep 2008 10:33:05 +0000 (11:33 +0100)]
ALSA: ASoC: Use snd_soc_dapm_nc_pin() in GTA01 audio driver

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: ASoC: Allow machine drivers to mark pins as not connected
Mark Brown [Wed, 24 Sep 2008 10:23:11 +0000 (11:23 +0100)]
ALSA: ASoC: Allow machine drivers to mark pins as not connected

Add a new API call snd_soc_dapm_nc_pin() which allows machine drivers to
mark pins as being permanently disabled.  At present this is identical
to snd_soc_dapm_disable_pin() except in terms of improving the internal
documentation of machine drivers that use it.  The intention is that in
future it will be extended to provide additional features such as hiding
controls that are only relevant to paths using the disconnected pin.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: hda: VREF powerdown for headphones
Matthew Ranostay [Thu, 9 Oct 2008 13:32:17 +0000 (09:32 -0400)]
ALSA: hda: VREF powerdown for headphones

Add support for powering down VREF on standard headphone insertion, also
powers up the VREF on a headset insertion.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: STAC_HP_M4
Matthew Ranostay [Thu, 9 Oct 2008 12:37:28 +0000 (08:37 -0400)]
ALSA: hda: STAC_HP_M4

Set the third microphone to a default config of a 'Line In' to be
added the Input Source Mux's.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Check for machine type in GTA01 machine driver
Mark Brown [Wed, 8 Oct 2008 12:02:20 +0000 (13:02 +0100)]
ALSA: ASoC: Check for machine type in GTA01 machine driver

Since there are now multiple OpenMoko platforms it is more important to
check that the machine driver is running on the correct system.  This
was orgininally generated as part of the initial GTA02 machine port.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: mtpav - Fix race in probe
Takashi Iwai [Wed, 8 Oct 2008 08:28:25 +0000 (10:28 +0200)]
ALSA: mtpav - Fix race in probe

Ingo reported Oops at probing mtpav driver.  It's a race between
the irq handler and the rawmidi instance registration.

This patch fixes the order of registration to avoid the race.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
Pedro Lopez-Cabanillas [Tue, 7 Oct 2008 18:54:18 +0000 (20:54 +0200)]
ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk

The MIDI interfaces have to be detected dynamically for Edirol devices
ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by
my other patch in uaxx-quirk.

Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Add a note on dependency of RTC stuff
Takashi Iwai [Tue, 7 Oct 2008 14:13:59 +0000 (16:13 +0200)]
ALSA: Add a note on dependency of RTC stuff

Added a note on the dependency of old RTC stuff, which is exclusive
with the new RTC class drivers.
    http://bugme.linux-foundation.org/show_bug.cgi?id=11430

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: add new param mux to dapm_mux_update_power
Richard Zhao [Tue, 7 Oct 2008 00:05:20 +0000 (08:05 +0800)]
ALSA: ASoC: add new param mux to dapm_mux_update_power

Function dapm_mux_update_power needs enum index mux and register mask value val
as parameters, but it only has a parameter val, and uses it as both val and mux.
snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here,
e->texts[val] but val should be enum index mux here.

This patch adds a new param mux to fix it.

Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Increase components array size
Takashi Iwai [Tue, 7 Oct 2008 09:38:09 +0000 (11:38 +0200)]
ALSA: Increase components array size

Increase the card components[] (and thus snd_card_info.components[],
too) array size from 80 to 128 chars so that more strings can be
stored.  The 80 chars aren't enough for more than 2 HD-audio codecs,
and this hits an ugly snd_BUG() as reported by Wu Fegguang for HP
2230s.

The control protocol number is increased to 2.0.6 as well, in case
it matters.

Reported-by: Wu Fengguang <wfg@linux.intel.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver
Mark Brown [Mon, 6 Oct 2008 10:33:21 +0000 (11:33 +0100)]
ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver

Mic PGA Switch should be inverted in the WM8510 driver but isn't.

Reported-by: ext-jukka.hynninen@vaisala.com
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: comment typo fix
Wu Fengguang [Tue, 7 Oct 2008 06:21:41 +0000 (14:21 +0800)]
ALSA: hda: comment typo fix

fix a typo in comment for is_in_nid_list().

Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: comment typo fix
Wu Fengguang [Tue, 7 Oct 2008 06:17:53 +0000 (14:17 +0800)]
ALSA: hda: comment typo fix

fix a typo in comment for process_unsol_events().

Signed-off-by: Wu Fengguang<wfg@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI
Takashi Iwai [Sun, 5 Oct 2008 08:57:39 +0000 (10:57 +0200)]
ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI

The PCI SSID for ASROCK mobo in commit
ac56445dd6a38a36c2fa91989f5f6220a9bdf97c is wrong.
This patch fixes to the correct one, 1849:3662.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: snd-usb-audio: support for Edirol UA-4FX device
Pedro Lopez-Cabanillas [Sat, 4 Oct 2008 14:27:36 +0000 (16:27 +0200)]
ALSA: snd-usb-audio: support for Edirol UA-4FX device

Renamed the old quirk function for ua-700/ua-25 to become more
generic, moving the MIDI interfaces to the quirk data header.
Added a new quirk for the Edirol UA-4FX.

Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: usb - Fix possible Oops at USB-MIDI disconnection
Takashi Iwai [Thu, 2 Oct 2008 12:50:22 +0000 (14:50 +0200)]
ALSA: usb - Fix possible Oops at USB-MIDI disconnection

The endpoints should be released immediately at disconnection
rather than the delayed release.  This could be a reason of Oops
at USB-audio device disconnection being used.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - Fix another ALC889A (rev 0x100101)
Clive Messer [Tue, 30 Sep 2008 13:49:13 +0000 (15:49 +0200)]
ALSA: hda - Fix another ALC889A (rev 0x100101)

ALC889A hardware (id 0x10ec0885 rev 0x100101) to use patch_alc883

Signed-off-by: Clive Messer <clive@vacuumtube.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: add more board-specific information for Realtek ALC662 rev1
Vedran Miletic [Mon, 29 Sep 2008 18:29:25 +0000 (20:29 +0200)]
ALSA: hda: add more board-specific information for Realtek ALC662 rev1

I recently got a chance to play with two boards with ALC662 rev1:
* BIOSTAR TA780G M2+
* ASROCK K10N78FullHD-hSLI R3.0
Both use 3 stack, 6ch mode with digital out. Since autodetection isn't able
to figure that out from BIOS, we need to specify that manually.

Signed-off-by: Vedran Miletic <rivanvx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Correct Vladimir Barinov's e-mail address
Vladimir Barinov [Mon, 29 Sep 2008 19:14:11 +0000 (23:14 +0400)]
ALSA: Correct Vladimir Barinov's e-mail address

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards
Vedran Miletic [Mon, 29 Sep 2008 13:08:00 +0000 (15:08 +0200)]
ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards

This patch adds PCI IDs for:
* TerraTec DMX XFire 1024
* Hercules Gamesurround Fortissimo II
* Hercules Gamesurround Fortissimo III 7.1
All those cards were supported as generic CS46xx device,
so they will work as before. I'm pretty sure that first two
cards work, as they have same hardware design as reference
card. Not sure about Fortissimo III, but this won't break it
if it worked.

Tested on TerraTec DMX XFire 1024.

Signed-off-by: Vedran Miletic <rivanvx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: SPDIF stream muting support
Matthew Ranostay [Sat, 27 Sep 2008 22:13:47 +0000 (18:13 -0400)]
ALSA: hda: SPDIF stream muting support

Added support for muting S/DPIF outs using the 'Digital Playback Source' muxs on
supporting codecs.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: appletv support
Peter Korsgaard [Sat, 27 Sep 2008 07:13:45 +0000 (09:13 +0200)]
ALSA: hda: appletv support

The AppleTV needs the same handling as the 24" iMac.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - Map ALC662 model for Foxconn 45CMX/45GMX/45CMX-K
Herton Ronaldo Krzesinski [Sat, 27 Sep 2008 02:48:45 +0000 (23:48 -0300)]
ALSA: hda - Map ALC662 model for Foxconn 45CMX/45GMX/45CMX-K

Use 3stack-6ch-dig ALC662 model for Foxconn 45CMX/45GMX/45CMX-K motherboard.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - Map ALC662 model for Gigabyte 945GCM-S2L
Herton Ronaldo Krzesinski [Sat, 27 Sep 2008 02:47:45 +0000 (23:47 -0300)]
ALSA: hda - Map ALC662 model for Gigabyte 945GCM-S2L

Use 3stack-6ch-dig ALC662 model for Gigabyte 945GCM-S2L motherboard.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: sound/soc/at32: Useless NULL test
Julien Brunel [Fri, 26 Sep 2008 13:23:46 +0000 (15:23 +0200)]
ALSA: sound/soc/at32: Useless NULL test

The test (ssc != NULL) can only be reached if the call to the function
ssc_request, the result of which ssc is assigned, succeeds. Moreover,
two statements assign NULL to ssc just before a return, which is useless
since it is a local variable. So, we suggest to delete the test and
the two assignments.

A simplified version of the semantic match that finds this problem is
as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@bad_null_test@
expression x,E;
@@
x = ssc_request(...)
... when != x = E
* x != NULL
// </smpl>

Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: HP laptop quirk
Matthew Ranostay [Fri, 26 Sep 2008 14:37:03 +0000 (10:37 -0400)]
ALSA: hda: HP laptop quirk

Added HP laptop SND_PCI_QUIRK for STAC_HP_M4.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: 92xx S/PDIF In support
Matthew Ranostay [Fri, 26 Sep 2008 14:06:40 +0000 (10:06 -0400)]
ALSA: hda: 92xx S/PDIF In support

Add support for S/PDIF IN on reference boards quirks. Also disable the
IEC958 capture switch on boards with GPIO0 enabled.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: usb-audio: add support for E-Mu Tracker Pre
Eran Tromer [Fri, 26 Sep 2008 05:07:03 +0000 (01:07 -0400)]
ALSA: usb-audio: add support for E-Mu Tracker Pre

Add support for the E-Mu "Tracker Pre" USB sound card, following
the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB.

As with the 0202 and 0404 USB, functionality is very limited:
just a couple of sample rates, no volume/mute control, etc.

Signed-off-by: Eran Tromer <eran@tromer.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Fix for reading RIRB buffer on NVIDIA aza controller with AMD Phenom cpu
Wei Ni [Fri, 26 Sep 2008 05:55:56 +0000 (13:55 +0800)]
ALSA: Fix for reading RIRB buffer on NVIDIA aza controller with AMD Phenom cpu

When read RIRB buffer immediately after RIRB interrupt received,
sometimes the data will be "0x0". If we wait for some time, the data
in buffer will be correct. This issue only occurred with AMD Phenom cpu.
So we set this "needs_damn_long_delay" flag.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Support NVIDIA MCP78/7A HDMI audio
Wei Ni [Fri, 26 Sep 2008 05:45:46 +0000 (13:45 +0800)]
ALSA: Support NVIDIA MCP78/7A HDMI audio

Add NVIDIA HDMI HD-audio codec support in snd-hda-intel driver,
include NVIDIA MCP78/7A HDMI.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - Fix / clean-up slave digital out codes
Takashi Iwai [Thu, 25 Sep 2008 14:32:41 +0000 (16:32 +0200)]
ALSA: hda - Fix / clean-up slave digital out codes

The recent slave_dig_out addition has some rooms to clean up.
Also it doesn't call snd_hda_cleanup_stream() properly for slaves
at closing.  The patch fixes both issues.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: slave_dig_outs code block in wrong location
Matthew Ranostay [Thu, 25 Sep 2008 13:17:11 +0000 (09:17 -0400)]
ALSA: hda: slave_dig_outs code block in wrong location

Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch
control. Beforehand this was basically a mute switch for the S/PDIF outs as well.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: intel8x0 - Add quirk for Fujitsu Lifebook P7010
Takashi Iwai [Wed, 24 Sep 2008 07:59:44 +0000 (09:59 +0200)]
ALSA: intel8x0 - Add quirk for Fujitsu Lifebook P7010

Fujitsu Lifebook P7010 requires ac97_quirk=hp_only.
    http://bugzilla.kernel.org/show_bug.cgi?id=9100

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Remove bitwise from snd_pcm_hw_param_t
Takashi Iwai [Wed, 24 Sep 2008 07:44:18 +0000 (09:44 +0200)]
ALSA: Remove bitwise from snd_pcm_hw_param_t

We have some arithmetic operations against snd_pcm_hw_param_t, thus
bitwise isn't correct for it.  Better to remove the flag to shut up
sparse warnings.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: use last DAC defined for hp_pin
Matthew Ranostay [Wed, 24 Sep 2008 01:46:30 +0000 (21:46 -0400)]
ALSA: hda: use last DAC defined for hp_pin

Patch allows the last DAC in the dac_nids for the hp_nid if there is an
available one this isn't in use by a line_out entry or if hp_nid isn't already
defined. This solves the issues with the 'Headphone Playback' mixer
controls on the 92hd73xxx branch and possibly others.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: oxygen: wait for ACK when resetting UART
Clemens Ladisch [Wed, 24 Sep 2008 13:25:28 +0000 (15:25 +0200)]
ALSA: oxygen: wait for ACK when resetting UART

After sending a reset command to the UART, wait some time for the ACK to
be generated (and to be read and dropped by the interrupt handler)
before sending the next command.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: ASoC: Convert tlv320aic3x to a new-style i2c driver (v2)
Jean Delvare [Mon, 22 Sep 2008 12:15:53 +0000 (14:15 +0200)]
ALSA: ASoC: Convert tlv320aic3x to a new-style i2c driver (v2)

Convert the tlv320aic3x codec driver to the new (standard) device
driver binding model.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Vladimir Barinov <vbarinov@ru.mvista.com>
Tested-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - Fix ALC662 DAC mixer mutes also for auto config model
Herton Ronaldo Krzesinski [Thu, 18 Sep 2008 19:41:49 +0000 (16:41 -0300)]
ALSA: hda - Fix ALC662 DAC mixer mutes also for auto config model

In previous change "[ALSA] hda-codec - Fix ALC662 DAC mixer mutes", I
missed to fix the mixer mute switches also for the auto config model of
ALC662. Now mute for mixer items "Front", "Surround", "Center" and "LFE"
when available will work too with "auto" model.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - Add PCI subsystem ID for MacBookPro4,1
David Woodhouse [Thu, 18 Sep 2008 20:37:13 +0000 (13:37 -0700)]
ALSA: hda - Add PCI subsystem ID for MacBookPro4,1

This seems to work if I tell it that it's a mbp3. Not sure if there are
actually any differences.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: SPDIF mux fixes for STAC927x
Matthew Ranostay [Tue, 16 Sep 2008 14:39:37 +0000 (10:39 -0400)]
ALSA: hda: SPDIF mux fixes for STAC927x

Corrected bounds-checking in stac92xx_auto_create_mux_input_ctls() and added a spec->spdif_labels
pointer for custom SPDIF mux labels for non-standard codec connections.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Add WM8750 SPI support
Mark Brown [Tue, 16 Sep 2008 11:51:26 +0000 (12:51 +0100)]
sound: ASoC: Add WM8750 SPI support

Implement SPI support for WM8750, cut'n'pasting from the support for
WM8731 contributed by Cliff Cai and Alan Horstmann since the wire format
is the same for both codecs.

Also fix a cut'n'pasted comment in the I2C side of the driver (which was
clearly written in the same way) while we're at it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: DAPM support for ADC on WM9713 PCM interface
Mark Brown [Mon, 15 Sep 2008 14:51:13 +0000 (15:51 +0100)]
sound: ASoC: DAPM support for ADC on WM9713 PCM interface

The stereo ADC in the WM9713 can be used to produce data for both the
standard AC97 interface and the additional voice PCM interface. Support
use on both by defining virtual ADCs tied to each accepting the output
from the actual ADCs.

Reported-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Fix dependency on AC97_BUS
Mark Brown [Mon, 15 Sep 2008 14:57:36 +0000 (15:57 +0100)]
sound: ASoC: Fix dependency on AC97_BUS

When built with AC97 support the ASoC core depends on AC97_BUS so force
it to be available Kconfig.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA VIA: Replace buggy Mic Boost
Harald Welte [Mon, 15 Sep 2008 14:43:23 +0000 (22:43 +0800)]
ALSA: HDA VIA: Replace buggy Mic Boost

VT1708S' Mic Boost should be hidden in hardware design according to some
customers' requirements.  However, in case of bugs, it has to be exhibited to
normal users, so we need to:
* open a software backdoor, which is disabled by default in hardware
* re-write .tlv & .info, to indicate the actual necessary info, which we cannot
  get from amplifier's capabiliies

Signed-off-by: Logan Li <LoganLi@viatech.com.cn>
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA VIA: Fix 2nd S/PDIF out function
Harald Welte [Mon, 15 Sep 2008 14:42:26 +0000 (22:42 +0800)]
ALSA: HDA VIA: Fix 2nd S/PDIF out function

As it seems, the recently-sent patch for the 2nd S/PDIF (HDMI) output
is not working with alsa-kernel 1.0.18rc3.

This patch makes it work by
* activating the second S/PDIF output pin in the pin config
* consolidating the dig_playback_pcm_prepare() with extra_dig_pcm_prepare()
  functions
* remove the need for an extra hda_pcm_stream structure and rather represents
  the second digital output as substream within the primary S/PDIF digital out
  stream.

Signed-off-by: Logan Li <LoganLi@viatech.com.cn>
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA VIA: Fix crash on codecs without Headphone
Harald Welte [Mon, 15 Sep 2008 14:41:31 +0000 (22:41 +0800)]
ALSA: HDA VIA: Fix crash on codecs without Headphone

Don't enumerate via_hp_mixer while hp_mux is null (headphone does not exist),
to fix the crash of via_independent_hp_info (via_hp_mixer's .info), which will
reference hp_mux.

Signed-off-by: Logan Li <LoganLi@viatech.com.cn>
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Separate common pxa2xx-pcm code
Dmitry Baryshkov [Wed, 10 Sep 2008 01:01:20 +0000 (05:01 +0400)]
ALSA: Separate common pxa2xx-pcm code

ASoC and non-ASoC drivers for PCM DMA on PXA share lots of common code.
Move it to pxa2xx-lib.

[Fixed some checkpatch warnings -- broonie]

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: pxa2xx-ac97-lib: support building for several CPUs
Dmitry Baryshkov [Wed, 10 Sep 2008 01:01:18 +0000 (05:01 +0400)]
ALSA: pxa2xx-ac97-lib: support building for several CPUs

Support building of pxa2xx-ac97-lib for several CPUs by making code
run-time selected, not only compile-time.

[Fixed 3XX->3xx typos in ifdef checks -- broonie.]

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Separate common pxa2xx-ac97 code
Dmitry Baryshkov [Wed, 10 Sep 2008 01:01:17 +0000 (05:01 +0400)]
ALSA: Separate common pxa2xx-ac97 code

ASoC and non-ASoC drivers for ACLINK on PXA share lot's of common code.
Move all common code into separate module snd-pxa2xx-lib.

[Fixed handing of SND_AC97_CODEC in Kconfig and some checkpatch warnings
 -- broonie]

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Support runtime selection of CPU in pxa2xx-i2s
Dmitry Baryshkov [Wed, 10 Sep 2008 01:01:19 +0000 (05:01 +0400)]
sound: ASoC: Support runtime selection of CPU in pxa2xx-i2s

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Add WM8971 CODEC driver
Kenneth Kiraly [Wed, 10 Sep 2008 18:33:32 +0000 (19:33 +0100)]
sound: ASoC: Add WM8971 CODEC driver

The WM8971 is a low power, high quality stereo codec designed for
portable digital audio applications.

This driver was originally written by Kenneth Kiraly.  While out of tree
it has had updates to reflect current kernel APIs and coding standards
from Graeme Gregory and Mark Brown.

Signed-off-by: Kenneth Kiraly <kiraly@lab126.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: patch_analog: Quirk for Asus P5Q Premium/Pro boards.
Robin H. Johnson [Sat, 13 Sep 2008 23:55:01 +0000 (16:55 -0700)]
ALSA: HDA: patch_analog: Quirk for Asus P5Q Premium/Pro boards.

Use 6STACK_DIG for the AD2000BX variant of the AD1989B chip used by Asus
on their Asus P5Q Premium and Pro boards.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: patch_analog: Implement multiple outputs for AD1988
Robin H. Johnson [Sat, 13 Sep 2008 23:54:58 +0000 (16:54 -0700)]
ALSA: HDA: patch_analog: Implement multiple outputs for AD1988

Implement the slave_dig_outs for AD1989 cards. Untested due to lack of
hardware.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: hda_proc: Fix printf format specifier
Robin H. Johnson [Sat, 13 Sep 2008 23:54:57 +0000 (16:54 -0700)]
ALSA: HDA: hda_proc: Fix printf format specifier

The Pincap output had a typod format specifier, leading to an extraneous "08"
in the output, which is a reserved bit of the Vref field, and was really
confused :-).

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: hda_local: Less magic numbers.
Robin H. Johnson [Sat, 13 Sep 2008 23:54:59 +0000 (16:54 -0700)]
ALSA: HDA: hda_local: Less magic numbers.

Explain some of the magic numbers I saw while trying to fix the AD1989 SPDIF
issue. Maybe should just use the expanded form directly in the verbs?

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: patch_analog: Fix SPDIF output on AD1989B
Robin H. Johnson [Sat, 13 Sep 2008 23:55:00 +0000 (16:55 -0700)]
ALSA: HDA: patch_analog: Fix SPDIF output on AD1989B

The SPDIF pins for AD1989 are not enabled by default. Set OUT bit so that they
actually work. Also initialize the HDMI SPDIF at the same time.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: 92hd73xx fixes
Matthew Ranostay [Sat, 13 Sep 2008 20:45:39 +0000 (16:45 -0400)]
ALSA: hda: 92hd73xx fixes

Added support for defining the number of amps and the creation
of the private_dimux dynamically for the 92hd73xx codec family.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
[Fixed a typo by tiwai]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Fix section for snd-aica platform driver
Uwe Kleine-König [Sun, 14 Sep 2008 19:32:33 +0000 (21:32 +0200)]
ALSA: Fix section for snd-aica platform driver

Don't use __init but __devinit to define probe function.  A pointer to
snd_aica_probe is passed to the core via platform_driver_register and so the
function must not disappear after the module is loaded.  Using __init
and having HOTPLUG=y and SND_AICA=m the following probably oopses:

echo -n AICA > /sys/bus/platform/driver/AICA/unbind
echo -n AICA > /sys/bus/platform/driver/AICA/bind

Strange enough add_aicamixer_controls which is only called by
snd_aica_probe was already using __devinit.

While at it move the remove function to .devexit.text section.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: fixed hp_nid DAC for DELL_M6
Matthew Ranostay [Sat, 13 Sep 2008 14:36:58 +0000 (10:36 -0400)]
ALSA: hda: fixed hp_nid DAC for DELL_M6

This patch sets the HP out not used by the "Headphone to Line Out" switch to the
hp_nid.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: Input port AMP controls
Matthew Ranostay [Thu, 11 Sep 2008 13:49:39 +0000 (09:49 -0400)]
ALSA: hda: Input port AMP controls

Added support for controlling hardware gain amps on input ports
using a volume control mixer with a mux selecting the port being controlled.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: Added a STAC_HP_M4 quirk
Matthew Ranostay [Fri, 12 Sep 2008 16:02:30 +0000 (12:02 -0400)]
ALSA: hda: Added a STAC_HP_M4 quirk

Added a new quirk for STAC_HP_M4 series for an 92hd75xxx family laptop.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: fix oopses in snd-hda-intel after digital slave support additions
Herton Ronaldo Krzesinski [Sat, 13 Sep 2008 14:44:29 +0000 (16:44 +0200)]
ALSA: hda: fix oopses in snd-hda-intel after digital slave support additions

Many places fail to check if codec has slave_dig_outs entries (the most common
case is not having any entry), leading to various possible oopses in hda_codec
code.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Fix WM8731 SPI write
Alan Horstmann [Tue, 9 Sep 2008 18:25:49 +0000 (19:25 +0100)]
sound: ASoC: Fix WM8731 SPI write

Ensure wm8731_spi_write byte order is consistent regardless of
endianess.

Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: virtuoso: add Xonar HDAV1.3 support
Clemens Ladisch [Mon, 22 Sep 2008 07:12:11 +0000 (09:12 +0200)]
ALSA: virtuoso: add Xonar HDAV1.3 support

Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: rename first PCM device
Clemens Ladisch [Mon, 22 Sep 2008 07:07:53 +0000 (09:07 +0200)]
ALSA: oxygen: rename first PCM device

Rename the first PCM device from "Analog" to "Multichannel" because it
can be used for HDMI output on the Xonar HDAV.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: rename AC97 callback function
Clemens Ladisch [Mon, 22 Sep 2008 07:07:20 +0000 (09:07 +0200)]
ALSA: virtuoso: rename AC97 callback function

Rename the callback function that switches between line and mic inputs
on the Xonar D1 because it is also usable on other models.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: make number of PCM1796 DACs configurable
Clemens Ladisch [Mon, 22 Sep 2008 07:06:38 +0000 (09:06 +0200)]
ALSA: virtuoso: make number of PCM1796 DACs configurable

Do not use a hardcoded number when iterating over the PCM1796 DACs to
allow for cards with a different number of analog output channels.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: allow I2C-connected PCM1796
Clemens Ladisch [Mon, 22 Sep 2008 07:06:04 +0000 (09:06 +0200)]
ALSA: virtuoso: allow I2C-connected PCM1796

Add support for PCM1796 chips that are connected with an I2C bus instead
of SPI.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: add self-documenting functions
Clemens Ladisch [Mon, 22 Sep 2008 07:05:29 +0000 (09:05 +0200)]
ALSA: oxygen: add self-documenting functions

Introduce some trivial functions to better document the relationships of
the various model callbacks.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: add UART I/O functions
Clemens Ladisch [Mon, 22 Sep 2008 07:04:43 +0000 (09:04 +0200)]
ALSA: oxygen: add UART I/O functions

Add functions to allow model drivers to communicate with external chips
by doing I/O with the not-used-for-MIDI UART.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: configure MIDI via device_config
Clemens Ladisch [Mon, 22 Sep 2008 07:03:42 +0000 (09:03 +0200)]
ALSA: oxygen: configure MIDI via device_config

To enable the MIDI port, model drivers must now set flags in
device_config, not only in misc_flags.  This allows model drivers to
enable the UART without creating an ALSA MIDI device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: rename pcm_dev_cfg
Clemens Ladisch [Mon, 22 Sep 2008 07:02:08 +0000 (09:02 +0200)]
ALSA: oxygen: rename pcm_dev_cfg

Rename the pcm_dev_cfg field to device_config because there will be
additional flags that do not describe PCM devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: create common functions for GPIO bit switch controls
Clemens Ladisch [Mon, 22 Sep 2008 07:01:11 +0000 (09:01 +0200)]
ALSA: virtuoso: create common functions for GPIO bit switch controls

Factor out the common code of the mixer callbacks that handle controls
that just switch a single GPIO bit.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: handle D2X/DX dynamically
Clemens Ladisch [Mon, 22 Sep 2008 07:00:30 +0000 (09:00 +0200)]
ALSA: virtuoso: handle D2X/DX dynamically

The Xonar D2X and DX are very similar to the D2 and D1, respectively, so
we can handle the differences dynamically instead of using a separate
model structure for each one.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: handle X-Meridian dynamically
Clemens Ladisch [Mon, 22 Sep 2008 06:59:18 +0000 (08:59 +0200)]
ALSA: oxygen: handle X-Meridian dynamically

Handle the differences between the X-Meridian and the other models in
the probe callback instead of using a second model structure.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: remove X-Meridian magic number
Clemens Ladisch [Mon, 22 Sep 2008 06:57:24 +0000 (08:57 +0200)]
ALSA: oxygen: remove X-Meridian magic number

Introduce symbols that indicate the two models handled by the snd-oxygen
driver, instead of using a magic number.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: add probe callback
Clemens Ladisch [Mon, 22 Sep 2008 06:56:01 +0000 (08:56 +0200)]
ALSA: oxygen: add probe callback

Add a probe callback to the model structure so that model-specific
drivers can refine their model detection before the card is initialized.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: use a copy of the model struct
Clemens Ladisch [Mon, 22 Sep 2008 06:55:19 +0000 (08:55 +0200)]
ALSA: oxygen: use a copy of the model struct

Put a copy of the model structure into the chip structure so that model-
specific drivers can modify it depending on a particular device
instance.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: use SPDIF channel status symbols
Clemens Ladisch [Mon, 22 Sep 2008 06:53:31 +0000 (08:53 +0200)]
ALSA: oxygen: use SPDIF channel status symbols

When setting the SPDIF channel status sample rate field, use the
recently defined symbols instead of magic numbers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: Release v1.0.18rc3
Jaroslav Kysela [Tue, 9 Sep 2008 16:55:25 +0000 (18:55 +0200)]
ALSA: Release v1.0.18rc3

Signed-off-by: Jaroslav Kysela <perex@perex.cz>