GitHub/LineageOS/android_kernel_samsung_universal7580.git
15 years agoV4L/DVB (12314): cx23885: add CAM presence checkout
Igor M. Liplianin [Mon, 20 Jul 2009 15:27:27 +0000 (12:27 -0300)]
V4L/DVB (12314): cx23885: add CAM presence checkout

Add CAM presence checkout during CiMax init for NetUP card.

CAM presence checkout is needed after power on PC.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12313): stv6110: Read registers through one time i2c_transfer calling
Igor M. Liplianin [Sun, 19 Jul 2009 21:21:38 +0000 (18:21 -0300)]
V4L/DVB (12313): stv6110: Read registers through one time i2c_transfer calling

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12312): stv0900: fix i2c repeater configuration must be set to manual
Abylay Ospan [Sun, 19 Jul 2009 21:15:45 +0000 (18:15 -0300)]
V4L/DVB (12312): stv0900: fix i2c repeater configuration must be set to manual

In automatic mode every stop event on SDA line ends repetition.
However, in  NetUP Dual card on the same i2c bus we have several devices.
If someone using both adapters to lock simultaneously or working with CAM interface
during lock procedure, it lead to end repetition prematurely quite often.
Set stv0900 i2c repeater to manual mode prevents such situation.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12311): Change clocking configuration and frequency for NetUP card.
Abylay Ospan [Sun, 19 Jul 2009 21:06:00 +0000 (18:06 -0300)]
V4L/DVB (12311): Change clocking configuration and frequency for NetUP card.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12310): stv6110 tuner: remove unused iq_wiring configuration parameter.
Igor M. Liplianin [Sun, 19 Jul 2009 20:57:29 +0000 (17:57 -0300)]
V4L/DVB (12310): stv6110 tuner: remove unused iq_wiring configuration parameter.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12309): Add output clock configuration for stv6110 tuner.
Igor M. Liplianin [Sun, 19 Jul 2009 20:37:09 +0000 (17:37 -0300)]
V4L/DVB (12309): Add output clock configuration for stv6110 tuner.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12307): cx23885: Modify hardware revision detection for newer silicon
Steven Toth [Mon, 20 Jul 2009 18:40:31 +0000 (15:40 -0300)]
V4L/DVB (12307): cx23885: Modify hardware revision detection for newer silicon

cx23885: Modify hardware revision detection for newer silicon

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12306): cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850
Steven Toth [Mon, 20 Jul 2009 18:37:25 +0000 (15:37 -0300)]
V4L/DVB (12306): cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850

cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12305): cx23885: Convert existing HVR1800 GPIO calls into new format
Steven Toth [Fri, 26 Jun 2009 02:50:39 +0000 (23:50 -0300)]
V4L/DVB (12305): cx23885: Convert existing HVR1800 GPIO calls into new format

... improves readability and routes the calls through a specific single point.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12304): cx23885: Remove hardcoded gpio bits from the encoder driver
Steven Toth [Fri, 26 Jun 2009 02:43:31 +0000 (23:43 -0300)]
V4L/DVB (12304): cx23885: Remove hardcoded gpio bits from the encoder driver

The encoder driver has hardcoded GPIO bits set for the HVR1800, regardless
of whether it's being used by a HVR1800 or not. I've implemented some generic
GPIO manipulation routines and I'm calling them only when appropriate.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12294): b2c2: Use dvb-pll for Cablestar2
Trent Piepho [Thu, 11 Jun 2009 22:31:22 +0000 (19:31 -0300)]
V4L/DVB (12294): b2c2: Use dvb-pll for Cablestar2

The dvb-pll code should do the same thing that
alps_tdee4_stv0297_tuner_set_params() was doing.  Except the dvb-pll code
will check for tuner presence when attaching, while the old code didn't.

This tuner appears to not be behind the stv0297's I2C gate but is instead
on a different I2C adapter provided by the flexcop chip.  The old code
would turn the I2C gate off each time the tuner was used.  I've changed it
to turn the gate off when the tuner is attached and then disable the gate
control function.  This should result in the gate staying off, which should
be even better.

[hverkuil@xs4all.nl: fix compile error]

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12293): b2c2: Use dvb-pll for Skystar2 rev 2.3 and rev 2.6
Trent Piepho [Thu, 11 Jun 2009 22:31:22 +0000 (19:31 -0300)]
V4L/DVB (12293): b2c2: Use dvb-pll for Skystar2 rev 2.3 and rev 2.6

The code in skystar23_samsung_tbdu18132_tuner_set_params() and
samsung_tbmu24112_tuner_set_params() is equivalent to what the dvb-pll code
does.  There could be an issue because the dvb-pll code will probe to check
for the tuner, while the previous code didn't do any checks.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12292): b2c2: Use dvb-pll for AirStar DVB-T's tuner
Trent Piepho [Thu, 11 Jun 2009 22:31:22 +0000 (19:31 -0300)]
V4L/DVB (12292): b2c2: Use dvb-pll for AirStar DVB-T's tuner

The code in samsung_tdtc9251dh0_calc_regs() is equivalent to what dvb-pll's
code does.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12290): dvb-pll: Add support for Alps TDEE4 DVB-C NIM
Trent Piepho [Thu, 11 Jun 2009 22:24:00 +0000 (19:24 -0300)]
V4L/DVB (12290): dvb-pll: Add support for Alps TDEE4 DVB-C NIM

No datasheet, data take from code in flexcop driver.  That code rounded
down the divisor rather than rounding to nearest, which was probably not
intentional and the dvb-pll code will round to nearest.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12289): dvb-pll: Add support for Samsung TBMU24112 DVB-S NIM
Trent Piepho [Thu, 11 Jun 2009 22:21:34 +0000 (19:21 -0300)]
V4L/DVB (12289): dvb-pll: Add support for Samsung TBMU24112 DVB-S NIM

Tuner parameters determined from code in flexcop driver.  That code rounded
the divisor down instead of to the nearest value.  This was probably not
intentional and the dvb-pll version will round to nearest.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12288): dvb-pll: Add support for Samsung TBDU18132 DVB-S NIM
Trent Piepho [Thu, 11 Jun 2009 22:21:34 +0000 (19:21 -0300)]
V4L/DVB (12288): dvb-pll: Add support for Samsung TBDU18132 DVB-S NIM

Tuner parameters taken from flexcop driver.  This PLL has a 17 bit divisor
while the dvb-pll driver is designed for 15 bit divisors.  It's not a
problem as 15 bits is enough for the tuner's entire range.  But if a larger
range was wanted, it could be done by adding additional bands with the
extra divisor bits appearing as band switch bits.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12287): dvb-pll: Add Samsung TDTC9251DH0 DVB-T NIM
Trent Piepho [Thu, 11 Jun 2009 22:21:34 +0000 (19:21 -0300)]
V4L/DVB (12287): dvb-pll: Add Samsung TDTC9251DH0 DVB-T NIM

No datasheet, tuner data comes from code in flexcop driver.  This tuner is
also used on the AVerTV 771 supported by the bttv driver, but that code
uses a different tuner configuration, which is surprising.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12281): gspca - sunplus: Webcam 052b:1803 added.
Johannes Goerner [Thu, 9 Jul 2009 06:28:46 +0000 (03:28 -0300)]
V4L/DVB (12281): gspca - sunplus: Webcam 052b:1803 added.

Signed-off-by: Johannes Goerner <johannes-goerner@gmx.de>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12280): gspca - sonixj: Remove auto gain/wb/expo for the ov7660 sensor.
Jean-Francois Moine [Wed, 8 Jul 2009 09:33:44 +0000 (06:33 -0300)]
V4L/DVB (12280): gspca - sonixj: Remove auto gain/wb/expo for the ov7660 sensor.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12278): zr364xx: implement V4L2_CAP_STREAMING
Lamarque Vieira Souza [Wed, 15 Jul 2009 23:54:55 +0000 (20:54 -0300)]
V4L/DVB (12278): zr364xx: implement V4L2_CAP_STREAMING

This patch implements V4L2_CAP_STREAMING for the zr364xx driver, by
converting the driver to use videobuf. This version is synced with v4l-dvb as
of 15/Jul/2009.

Tested with Creative PC-CAM 880.

It basically:
. implements V4L2_CAP_STREAMING using videobuf;

. re-implements V4L2_CAP_READWRITE using videobuf;

. copies cam->udev->product to the card field of the v4l2_capability struct.
That gives more information to the users about the webcam;

. moves the brightness setting code from before requesting a frame (in
read_frame) to the vidioc_s_ctrl ioctl. This way the brightness code is
executed only when the application requests a change in brightness and
not before every frame read;

. comments part of zr364xx_vidioc_try_fmt_vid_cap that says that Skype +
libv4l do not work.

This patch fixes zr364xx for applications such as mplayer,
Kopete+libv4l and Skype+libv4l can make use of the webcam that comes
with zr364xx chip.

Signed-off-by: Lamarque V. Souza <lamarque@gmail.com>
Signed-off-by: Antoine Jacquet <royale@zerezo.com>
[mchehab@redhat.com: fix the lack of linux/version.h]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12276): Remove a useless check from dvb_dmx_swfilter_packet()
Andreas Oberritter [Tue, 14 Jul 2009 23:48:37 +0000 (20:48 -0300)]
V4L/DVB (12276): Remove a useless check from dvb_dmx_swfilter_packet()

Values for 'pid' range from 0 to 0x1fff. Therefore 'feed->pid' can never
be equal to both 'pid' and 0x2000. This makes the continue statement have
no effect.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12275): Add two new ioctls: DMX_ADD_PID and DMX_REMOVE_PID
Andreas Oberritter [Tue, 14 Jul 2009 23:28:50 +0000 (20:28 -0300)]
V4L/DVB (12275): Add two new ioctls: DMX_ADD_PID and DMX_REMOVE_PID

DMX_ADD_PID allows to add multiple PIDs to a transport stream filter
previously set up with DMX_SET_PES_FILTER and output=DMX_OUT_TSDEMUX_TAP.

DMX_REMOVE_PID is used to drop a PID from a filter.

These ioctls are to be used by readers of /dev/dvb/adapterX/demuxY. They
may be called at any time, i.e. before or after the first filter on the
shared file descriptor was started.

They make it possible to record multiple services without the need to de-
or re-multiplex TS packets.

To accomplish this, dmxdev_filter->feed.ts has been converted to a list
of struct dmxdev_feeds, each containing a PID value and a pointer to a
struct dmx_ts_feed.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12274): em28xx-video: better implement ac97 control ioctls
Mauro Carvalho Chehab [Sun, 19 Jul 2009 13:45:49 +0000 (10:45 -0300)]
V4L/DVB (12274): em28xx-video: better implement ac97 control ioctls

In the past, some devices with saa711x had their parameters controlled
directly inside em28xx driver, instead of using their proper module for
it.

Due to that, the ac97 controls were mixed with saa711x ones.

Older patches removed all saa711x controls, but we still need to control
ac97 devices on em28xx, since we don't have a separate v4l2 device for
it.

The proper way to address is to create a separate ac97 v4l2 device.
While we don't have it, we should clean up the code to allow having a
better view of what is part of em28xx core code and what's due to ac97
control inside it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12273): em28xx-video: rename ac97 audio controls to better document it
Mauro Carvalho Chehab [Sun, 19 Jul 2009 12:10:06 +0000 (09:10 -0300)]
V4L/DVB (12273): em28xx-video: rename ac97 audio controls to better document it

As em28xx chip has nothing to do with volume/mute controls, rename those
controls to properly indicate that they control the companion AC97 chip
that it is inside the boards with this chip.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12272): cx23885: add card Magic-Pro ProHDTV Extreme 2
David Wong [Wed, 17 Jun 2009 04:38:12 +0000 (01:38 -0300)]
V4L/DVB (12272): cx23885: add card Magic-Pro ProHDTV Extreme 2

cx23885: add card Magic-Pro  ProHDTV Extreme 2 PCI-E.

Signed-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12271): lgs8gxx: add lgs8g75 support
David Wong [Wed, 17 Jun 2009 04:38:10 +0000 (01:38 -0300)]
V4L/DVB (12271): lgs8gxx: add lgs8g75 support

lgs8gxx: add lgs8g75 demodulator support

Signed-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12231): gspca - main: Version change.
Jean-Francois Moine [Tue, 7 Jul 2009 07:13:23 +0000 (04:13 -0300)]
V4L/DVB (12231): gspca - main: Version change.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12230): gspca - t613: Change tas5130a init sequences.
Jean-Francois Moine [Tue, 7 Jul 2009 07:03:24 +0000 (04:03 -0300)]
V4L/DVB (12230): gspca - t613: Change tas5130a init sequences.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12229): gspca - main: Change the ISOC initialization mechanism.
Jean-Francois Moine [Tue, 30 Jun 2009 10:07:01 +0000 (07:07 -0300)]
V4L/DVB (12229): gspca - main: Change the ISOC initialization mechanism.

- call a new subdriver function 'isoc_init' before chosing the first
  alternate setting.
- call a new subdriver function 'isoc_nego' when submitting the URBs failed.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12228): gspca - vc032x: Webcam 0ac8:c301 added.
Jean-Francois Moine [Sat, 27 Jun 2009 08:33:48 +0000 (05:33 -0300)]
V4L/DVB (12228): gspca - vc032x: Webcam 0ac8:c301 added.

Only the back sensor (mi1320_soc) is usable.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12227): gspca - pac7311: Webcam 093a:2629 added.
Jean-Francois Moine [Sat, 20 Jun 2009 07:58:57 +0000 (04:58 -0300)]
V4L/DVB (12227): gspca - pac7311: Webcam 093a:2629 added.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12226): gspca - spca508: Extend the write_vector routine.
Jean-Francois Moine [Fri, 12 Jun 2009 06:49:39 +0000 (03:49 -0300)]
V4L/DVB (12226): gspca - spca508: Extend the write_vector routine.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12218): radio-si470x: conform to the RDS spec.
Hans Verkuil [Sat, 20 Jun 2009 09:25:14 +0000 (06:25 -0300)]
V4L/DVB (12218): radio-si470x: conform to the RDS spec.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12217): radio-cadet: conform to the RDS spec.
Hans Verkuil [Sat, 20 Jun 2009 09:19:09 +0000 (06:19 -0300)]
V4L/DVB (12217): radio-cadet: conform to the RDS spec.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12216): saa7134: set RDS capability if applicable.
Hans Verkuil [Sat, 20 Jun 2009 09:09:52 +0000 (06:09 -0300)]
V4L/DVB (12216): saa7134: set RDS capability if applicable.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12215): saa6588: conform to the final RDS spec.
Hans Verkuil [Sat, 20 Jun 2009 09:09:14 +0000 (06:09 -0300)]
V4L/DVB (12215): saa6588: conform to the final RDS spec.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12214): bttv: set RDS capability if applicable.
Hans Verkuil [Sat, 20 Jun 2009 09:09:33 +0000 (06:09 -0300)]
V4L/DVB (12214): bttv: set RDS capability if applicable.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12212): v4l2: add RDS API to videodev2.h
Hans Verkuil [Sat, 20 Jun 2009 08:37:27 +0000 (05:37 -0300)]
V4L/DVB (12212): v4l2: add RDS API to videodev2.h

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12210): ivtv: Fix automatic detection of AVerMedia UltraTV 1500MCE.
Andy Walls [Sun, 5 Jul 2009 18:13:56 +0000 (15:13 -0300)]
V4L/DVB (12210): ivtv: Fix automatic detection of AVerMedia UltraTV 1500MCE.

My initial change left the AVerMedia UtlraTV 1500MCE card entry out of the
list of cards to check during the probe.  This change adds it to the
ivtv_card_list[].

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12209): ivtv: Add card entry for AVerMedia UltraTV 1500 MCE (M113 variant)
Andy Walls [Fri, 3 Jul 2009 02:08:59 +0000 (23:08 -0300)]
V4L/DVB (12209): ivtv: Add card entry for AVerMedia UltraTV 1500 MCE (M113 variant)

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12207): cx18: Add an EEPROM dump routine for the Yuan MPC718 and future...
Andy Walls [Sun, 5 Jul 2009 20:09:28 +0000 (17:09 -0300)]
V4L/DVB (12207): cx18: Add an EEPROM dump routine for the Yuan MPC718 and future cards

Add a routine for dumping the EEPROM of the MPC718.  It is generic enough
to use for other cards in the future that may have an EEPROM.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12204): bttv and meye: Use PCI_VDEVICE
Joe Perches [Sun, 5 Jul 2009 18:59:21 +0000 (15:59 -0300)]
V4L/DVB (12204): bttv and meye: Use PCI_VDEVICE

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12200): mt312: Fix checkpatch warnings
Matthias Schwarzott [Thu, 2 Jul 2009 19:17:28 +0000 (16:17 -0300)]
V4L/DVB (12200): mt312: Fix checkpatch warnings

This patch fixes some checkpatch warnings in mt312-driver.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12199): remove redundant tests on unsigned
Roel Kluin [Thu, 2 Jul 2009 19:09:25 +0000 (16:09 -0300)]
V4L/DVB (12199): remove redundant tests on unsigned

input, inp and i are unsigned. When negative they are wrapped and caught by the
other test.

Cc: Andy Walls <awalls@radix.net>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12198): ivtv-driver.c: Remove unnecessary semicolons
Joe Perches [Thu, 2 Jul 2009 19:02:20 +0000 (16:02 -0300)]
V4L/DVB (12198): ivtv-driver.c: Remove unnecessary semicolons

Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12197): Remove unnecessary semicolons
Joe Perches [Thu, 2 Jul 2009 18:57:09 +0000 (15:57 -0300)]
V4L/DVB (12197): Remove unnecessary semicolons

Cc: Patrick Boettcher <patrick.boettcher@desy.de>
Cc: Steven Toth <stoth@linuxtv.org>
Cc: Igor M. Liplianin <liplianin@netup.ru>
Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12196): cx18-fileops.c: Remove unnecessary semicolons
Joe Perches [Thu, 2 Jul 2009 16:52:46 +0000 (13:52 -0300)]
V4L/DVB (12196): cx18-fileops.c: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Walls <awalls@radix.net>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12190): em28xx: Add support for Gadmei UTV330+
Zhenyu Wang [Sun, 5 Jul 2009 13:51:21 +0000 (10:51 -0300)]
V4L/DVB (12190): em28xx: Add support for Gadmei UTV330+

em28xx: Add support for Gadmei UTV330+

Signed-off-by: Zhenyu Wang <zhen78@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12188): uvcvideo: Set PROBE_MINMAX quirk for Aveo Technology webcams
Laurent Pinchart [Fri, 3 Jul 2009 15:32:46 +0000 (12:32 -0300)]
V4L/DVB (12188): uvcvideo: Set PROBE_MINMAX quirk for Aveo Technology webcams

Some Aveo Technology USB 2.0 Camera (1871:0306) revisions seem to require the
PROBE_MINMAX quirk. As the camera supports uncompressed YUYV data only, it's
safe to set the quirk even if not strictly required for all models. Update the
device entry in the device IDs list.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12187): uvcvideo: Move UVC definitions to linux/usb/video.h
Laurent Pinchart [Fri, 26 Jun 2009 15:15:38 +0000 (12:15 -0300)]
V4L/DVB (12187): uvcvideo: Move UVC definitions to linux/usb/video.h

To make UVC constants accessible by a future UVC gadget driver, move them from
drivers/media/video/uvc/uvcvideo.h to include/linux/usb/video.h.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12186): uvcvideo: Remove unused Logitech-specific constants
Laurent Pinchart [Fri, 26 Jun 2009 14:41:04 +0000 (11:41 -0300)]
V4L/DVB (12186): uvcvideo: Remove unused Logitech-specific constants

Those constants are not used anymore, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12185): uvcvideo: Prefix all UVC constants with UVC_
Laurent Pinchart [Fri, 26 Jun 2009 14:39:42 +0000 (11:39 -0300)]
V4L/DVB (12185): uvcvideo: Prefix all UVC constants with UVC_

In preparation to moving UVC constants to a public location, prefix all
constants with UVC_ to avoid namespace clashes.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12184): uvcvideo: Use class-specific descriptor types from usb/ch9.h
Laurent Pinchart [Fri, 26 Jun 2009 14:30:09 +0000 (11:30 -0300)]
V4L/DVB (12184): uvcvideo: Use class-specific descriptor types from usb/ch9.h

uvcvideo.h redefines class-specific descriptor types already present in
usb/ch9.h. Remove the duplicated definitions and use the ones from usb/ch9.h.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12168): v4l2-ioctl: avoid flooding log with unasked debug messages
Mauro Carvalho Chehab [Thu, 2 Jul 2009 20:07:32 +0000 (17:07 -0300)]
V4L/DVB (12168): v4l2-ioctl: avoid flooding log with unasked debug messages

Thanks to Hans Verkuil <hverkuil@xs4all.nl> for pointing this issue on
my last patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12124): v4l2-ioctl: better output debug messages for VIDIOC_ENUM_FRAMESIZES
Mauro Carvalho Chehab [Mon, 22 Jun 2009 01:37:12 +0000 (22:37 -0300)]
V4L/DVB (12124): v4l2-ioctl: better output debug messages for VIDIOC_ENUM_FRAMESIZES

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12158): v4l: add cropping prototypes to struct v4l2_subdev_video_ops
Guennadi Liakhovetski [Wed, 24 Jun 2009 13:31:25 +0000 (10:31 -0300)]
V4L/DVB (12158): v4l: add cropping prototypes to struct v4l2_subdev_video_ops

Add g_crop, s_crop and cropcap methods to video v4l2-subdev operations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12149): videodev2.h: Reorganize fourcc table
Mauro Carvalho Chehab [Tue, 30 Jun 2009 19:14:17 +0000 (16:14 -0300)]
V4L/DVB (12149): videodev2.h: Reorganize fourcc table

With the changes this file suffered along the time, things got a little disorganized.
In particular, V4L2_PIX_FMT_YVYU were shown as a device-specific format, instead of
yet another variant of YUV.

There's no functional change on this patch. It just adds some comments and reorder
fourcc formats to their proper places.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12147): pwc: remove definitions that are already present at videodev2.h
Mauro Carvalho Chehab [Tue, 30 Jun 2009 15:45:45 +0000 (12:45 -0300)]
V4L/DVB (12147): pwc: remove definitions that are already present at videodev2.h

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12144): radio-si470x: removed v4l2_queryctrl in favor of v4l2_ctrl_query_fill
Tobias Lorenz [Sat, 20 Jun 2009 22:17:30 +0000 (19:17 -0300)]
V4L/DVB (12144): radio-si470x: removed v4l2_queryctrl in favor of v4l2_ctrl_query_fill

Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12143): radio-si470x: cleanups
Tobias Lorenz [Sat, 20 Jun 2009 22:14:50 +0000 (19:14 -0300)]
V4L/DVB (12143): radio-si470x: cleanups

- Remove user count log messages
- Comments adopted to general style

Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoV4L/DVB (12142): radio-si470x: Add suport for RDS endpoint interrupt mode
Tobias Lorenz [Sat, 20 Jun 2009 22:00:06 +0000 (19:00 -0300)]
V4L/DVB (12142): radio-si470x: Add suport for RDS endpoint interrupt mode

Add support for interrupt mode for RDS endpoint, instead of polling.
Improves RDS reception significantly

Signed-off-by: Edouard Lafargue <edouard@lafargue.name>
Acked-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
15 years agoMerge git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Fri, 11 Sep 2009 23:39:11 +0000 (16:39 -0700)]
Merge git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (87 commits)
  NFSv4: Disallow 'mount -t nfs4 -overs=2' and 'mount -t nfs4 -overs=3'
  NFS: Allow the "nfs" file system type to support NFSv4
  NFS: Move details of nfs4_get_sb() to a helper
  NFS: Refactor NFSv4 text-based mount option validation
  NFS: Mount option parser should detect missing "port="
  NFS: out of date comment regarding O_EXCL above nfs3_proc_create()
  NFS: Handle a zero-length auth flavor list
  SUNRPC: Ensure that sunrpc gets initialised before nfs, lockd, etc...
  nfs: fix compile error in rpc_pipefs.h
  nfs: Remove reference to generic_osync_inode from a comment
  SUNRPC: cache must take a reference to the cache detail's module on open()
  NFS: Use the DNS resolver in the mount code.
  NFS: Add a dns resolver for use with NFSv4 referrals and migration
  SUNRPC: Fix a typo in cache_pipefs_files
  nfs: nfs4xdr: optimize low level decoding
  nfs: nfs4xdr: get rid of READ_BUF
  nfs: nfs4xdr: simplify decode_exchange_id by reusing decode_opaque_inline
  nfs: nfs4xdr: get rid of COPYMEM
  nfs: nfs4xdr: introduce decode_sessionid helper
  nfs: nfs4xdr: introduce decode_verifier helper
  ...

15 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Fri, 11 Sep 2009 23:38:33 +0000 (16:38 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (25 commits)
  pata_rz1000: use printk_once
  ahci: kill @force_restart and refine CLO for ahci_kick_engine()
  pata_cs5535: add pci id for AMD based CS5535 controllers
  ahci: Add AMD SB900 SATA/IDE controller device IDs
  drivers/ata: use resource_size
  sata_fsl: Defer non-ncq commands when ncq commands active
  libata: add SATA PMP revision information for spec 1.2
  libata: fix off-by-one error in ata_tf_read_block()
  ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA
  ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic
  dmi: extend dmi_get_year() to dmi_get_date()
  dmi: fix date handling in dmi_get_year()
  libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru()
  sata_sis: convert to slave_link
  sata_sil24: always set protocol override for non-ATAPI data commands
  libata: Export AHCI capabilities
  libata: Delegate nonrot flag setting to SCSI
  [libata] Add pata_rdc driver for RDC ATA devices
  drivers/ata: Remove unnecessary semicolons
  libata: remove spindown skipping and warning
  ...

15 years agoMerge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 11 Sep 2009 20:24:03 +0000 (13:24 -0700)]
Merge branch 'tracing-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits)
  ring-buffer: only enable ring_buffer_swap_cpu when needed
  ring-buffer: check for swapped buffers in start of committing
  tracing: report error in trace if we fail to swap latency buffer
  tracing: add trace_array_printk for internal tracers to use
  tracing: pass around ring buffer instead of tracer
  tracing: make tracing_reset safe for external use
  tracing: use timestamp to determine start of latency traces
  tracing: Remove mentioning of legacy latency_trace file from documentation
  tracing/filters: Defer pred allocation, fix memory leak
  tracing: remove users of tracing_reset
  tracing: disable buffers and synchronize_sched before resetting
  tracing: disable update max tracer while reading trace
  tracing: print out start and stop in latency traces
  ring-buffer: disable all cpu buffers when one finds a problem
  ring-buffer: do not count discarded events
  ring-buffer: remove ring_buffer_event_discard
  ring-buffer: fix ring_buffer_read crossing pages
  ring-buffer: remove unnecessary cpu_relax
  ring-buffer: do not swap buffers during a commit
  ring-buffer: do not reset while in a commit
  ...

15 years agoMerge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 11 Sep 2009 20:23:18 +0000 (13:23 -0700)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (64 commits)
  sched: Fix sched::sched_stat_wait tracepoint field
  sched: Disable NEW_FAIR_SLEEPERS for now
  sched: Keep kthreads at default priority
  sched: Re-tune the scheduler latency defaults to decrease worst-case latencies
  sched: Turn off child_runs_first
  sched: Ensure that a child can't gain time over it's parent after fork()
  sched: enable SD_WAKE_IDLE
  sched: Deal with low-load in wake_affine()
  sched: Remove short cut from select_task_rq_fair()
  sched: Turn on SD_BALANCE_NEWIDLE
  sched: Clean up topology.h
  sched: Fix dynamic power-balancing crash
  sched: Remove reciprocal for cpu_power
  sched: Try to deal with low capacity, fix update_sd_power_savings_stats()
  sched: Try to deal with low capacity
  sched: Scale down cpu_power due to RT tasks
  sched: Implement dynamic cpu_power
  sched: Add smt_gain
  sched: Update the cpu_power sum during load-balance
  sched: Add SD_PREFER_SIBLING
  ...

15 years agoMerge branch 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Fri, 11 Sep 2009 20:22:43 +0000 (13:22 -0700)]
Merge branch 'perfcounters-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  perf tools: Avoid unnecessary work in directory lookups
  perf stat: Clean up statistics calculations a bit more
  perf stat: More advanced variance computation
  perf stat: Use stddev_mean in stead of stddev
  perf stat: Remove the limit on repeat
  perf stat: Change noise calculation to use stddev
  x86, perf_counter, bts: Do not allow kernel BTS tracing for now
  x86, perf_counter, bts: Correct pointer-to-u64 casts
  x86, perf_counter, bts: Fail if BTS is not available
  perf_counter: Fix output-sharing error path
  perf trace: Fix read_string()
  perf trace: Print out in nanoseconds
  perf tools: Seek to the end of the header area
  perf trace: Fix parsing of perf.data
  perf trace: Sample timestamps as well
  perf_counter: Introduce new (non-)paranoia level to allow raw tracepoint access
  perf trace: Sample the CPU too
  perf tools: Work around strict aliasing related warnings
  perf tools: Clean up warnings list in the Makefile
  perf tools: Complete support for dynamic strings
  ...

15 years agoMerge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 11 Sep 2009 20:22:30 +0000 (13:22 -0700)]
Merge branch 'oprofile-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (55 commits)
  arch/x86/oprofile/op_model_amd.c: fix op_amd_handle_ibs() return type
  Revert "x86: oprofile/op_model_amd.c set return values for op_amd_handle_ibs()"
  x86/oprofile: Small coding style fixes
  x86/oprofile: Add counter reservation check for virtual counters
  x86/oprofile: Implement op_x86_virt_to_phys()
  oprofile: Adding switch counter to oprofile statistic variables
  x86/oprofile: Implement mux_clone()
  x86/oprofile: Enable multiplexing only if the model supports it
  x86/oprofile: Add function has_mux() to check multiplexing support
  x86/oprofile: Modify initialization of num_virt_counters
  x86/oprofile: Remove unused num_virt_controls from struct op_x86_model_spec
  x86/oprofile: Remove const qualifier from struct op_x86_model_spec
  x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c
  x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in nmi_int.c
  x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c
  x86/oprofile: Implement multiplexing setup/shutdown functions
  oprofile: Grouping multiplexing code in op_model_amd.c
  oprofile: Introduce op_x86_phys_to_virt()
  oprofile: Grouping multiplexing code in oprof.c
  oprofile: Remove oprofile_multiplexing_init()
  ...

15 years agoMerge branch 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 11 Sep 2009 20:21:31 +0000 (13:21 -0700)]
Merge branch 'irq-threaded-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Do not mask oneshot edge type interrupts
  genirq: Support nested threaded irq handling
  genirq: Add buslock support
  genirq: Add oneshot support

15 years agoMerge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 11 Sep 2009 20:20:42 +0000 (13:20 -0700)]
Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  pci/intr_remapping: Allocate irq_iommu on node
  irq: Add irq_node() primitive
  irq: Make sure irq_desc for legacy irq get correct node setting
  genirq: Add prototype for handle_nested_irq()
  irq: Remove superfluous NULL pointer check in check_irq_resend()
  irq: Clean up by removing irqfixup MODULE_PARM_DESC()
  genirq: Fix comment describing suspend_device_irqs()
  genirq: Remove obsolete defines and typedefs

15 years agoMerge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 11 Sep 2009 20:20:18 +0000 (13:20 -0700)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits)
  rcu: Move end of special early-boot RCU operation earlier
  rcu: Changes from reviews: avoid casts, fix/add warnings, improve comments
  rcu: Create rcutree plugins to handle hotplug CPU for multi-level trees
  rcu: Remove lockdep annotations from RCU's _notrace() API members
  rcu: Add #ifdef to suppress __rcu_offline_cpu() warning in !HOTPLUG_CPU builds
  rcu: Add CPU-offline processing for single-node configurations
  rcu: Add "notrace" to RCU function headers used by ftrace
  rcu: Remove CONFIG_PREEMPT_RCU
  rcu: Merge preemptable-RCU functionality into hierarchical RCU
  rcu: Simplify rcu_pending()/rcu_check_callbacks() API
  rcu: Use debugfs_remove_recursive() simplify code.
  rcu: Merge per-RCU-flavor initialization into pre-existing macro
  rcu: Fix online/offline indication for rcudata.csv trace file
  rcu: Consolidate sparse and lockdep declarations in include/linux/rcupdate.h
  rcu: Renamings to increase RCU clarity
  rcu: Move private definitions from include/linux/rcutree.h to kernel/rcutree.h
  rcu: Expunge lingering references to CONFIG_CLASSIC_RCU, optimize on !SMP
  rcu: Delay rcu_barrier() wait until beginning of next CPU-hotunplug operation.
  rcu: Fix typo in rcu_irq_exit() comment header
  rcu: Make rcupreempt_trace.c look at offline CPUs
  ...

15 years agoMerge branch 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 11 Sep 2009 20:19:40 +0000 (13:19 -0700)]
Merge branch 'core-printk-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  printk: Fix "printk: Enable the use of more than one CON_BOOT (early console)"
  printk: Restore previous console_loglevel when re-enabling logging
  printk: Ensure that "console enabled" messages are printed on the console
  printk: Enable the use of more than one CON_BOOT (early console)

15 years agoMerge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 11 Sep 2009 20:17:24 +0000 (13:17 -0700)]
Merge branch 'core-locking-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits)
  locking, m68k/asm-offsets: Rename signal defines
  locking: Inline spinlock code for all locking variants on s390
  locking: Simplify spinlock inlining
  locking: Allow arch-inlined spinlocks
  locking: Move spinlock function bodies to header file
  locking, m68k: Calculate thread_info offset with asm offset
  locking, m68k/asm-offsets: Rename pt_regs offset defines
  locking, sparc: Rename __spin_try_lock() and friends
  locking, powerpc: Rename __spin_try_lock() and friends
  lockdep: Remove recursion stattistics
  lockdep: Simplify lock_stat seqfile code
  lockdep: Simplify lockdep_chains seqfile code
  lockdep: Simplify lockdep seqfile code
  lockdep: Fix missing entries in /proc/lock_chains
  lockdep: Fix missing entry in /proc/lock_stat
  lockdep: Fix memory usage info of BFS
  lockdep: Reintroduce generation count to make BFS faster
  lockdep: Deal with many similar locks
  lockdep: Introduce lockdep_assert_held()
  lockdep: Fix style nits
  ...

15 years agoMerge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 11 Sep 2009 20:16:37 +0000 (13:16 -0700)]
Merge branch 'core-iommu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (59 commits)
  x86/gart: Do not select AGP for GART_IOMMU
  x86/amd-iommu: Initialize passthrough mode when requested
  x86/amd-iommu: Don't detach device from pt domain on driver unbind
  x86/amd-iommu: Make sure a device is assigned in passthrough mode
  x86/amd-iommu: Align locking between attach_device and detach_device
  x86/amd-iommu: Fix device table write order
  x86/amd-iommu: Add passthrough mode initialization functions
  x86/amd-iommu: Add core functions for pd allocation/freeing
  x86/dma: Mark iommu_pass_through as __read_mostly
  x86/amd-iommu: Change iommu_map_page to support multiple page sizes
  x86/amd-iommu: Support higher level PTEs in iommu_page_unmap
  x86/amd-iommu: Remove old page table handling macros
  x86/amd-iommu: Use 2-level page tables for dma_ops domains
  x86/amd-iommu: Remove bus_addr check in iommu_map_page
  x86/amd-iommu: Remove last usages of IOMMU_PTE_L0_INDEX
  x86/amd-iommu: Change alloc_pte to support 64 bit address space
  x86/amd-iommu: Introduce increase_address_space function
  x86/amd-iommu: Flush domains if address space size was increased
  x86/amd-iommu: Introduce set_dte_entry function
  x86/amd-iommu: Add a gneric version of amd_iommu_flush_all_devices
  ...

15 years agoMerge branch 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 11 Sep 2009 20:16:22 +0000 (13:16 -0700)]
Merge branch 'core-futexes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Detect mismatched requeue targets
  futex: Correct futex_wait_requeue_pi() commentary

15 years agoMerge branch 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 11 Sep 2009 20:15:55 +0000 (13:15 -0700)]
Merge branch 'core-debug-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  debug lockups: Improve lockup detection, fix generic arch fallback
  debug lockups: Improve lockup detection

15 years agoMerge branch 'core-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 11 Sep 2009 20:13:32 +0000 (13:13 -0700)]
Merge branch 'core-cleanups-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  workqueues: Improve schedule_work() documentation

15 years agoMerge branch 'nfs-for-2.6.32'
Trond Myklebust [Fri, 11 Sep 2009 18:59:37 +0000 (14:59 -0400)]
Merge branch 'nfs-for-2.6.32'

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Fri, 11 Sep 2009 16:38:37 +0000 (09:38 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (102 commits)
  crypto: sha-s390 - Fix warnings in import function
  crypto: vmac - New hash algorithm for intel_txt support
  crypto: api - Do not displace newly registered algorithms
  crypto: ansi_cprng - Fix module initialization
  crypto: xcbc - Fix alignment calculation of xcbc_tfm_ctx
  crypto: fips - Depend on ansi_cprng
  crypto: blkcipher - Do not use eseqiv on stream ciphers
  crypto: ctr - Use chainiv on raw counter mode
  Revert crypto: fips - Select CPRNG
  crypto: rng - Fix typo
  crypto: talitos - add support for 36 bit addressing
  crypto: talitos - align locks on cache lines
  crypto: talitos - simplify hmac data size calculation
  crypto: mv_cesa - Add support for Orion5X crypto engine
  crypto: cryptd - Add support to access underlaying shash
  crypto: gcm - Use GHASH digest algorithm
  crypto: ghash - Add GHASH digest algorithm for GCM
  crypto: authenc - Convert to ahash
  crypto: api - Fix aligned ctx helper
  crypto: hmac - Prehash ipad/opad
  ...

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Fri, 11 Sep 2009 16:19:35 +0000 (09:19 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (377 commits)
  ASoC: au1x: PSC-AC97 bugfixes
  ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128
  ALSA: dummy - Add debug proc file
  ALSA: Add const prefix to proc helper functions
  ALSA: Re-export snd_pcm_format_name() function
  ALSA: hda - Use auto model for HP laptops with ALC268 codec
  ALSA: cs46xx - Fix minimum period size
  ASoC: Fix WM835x Out4 capture enumeration
  ALSA: Remove unneeded ifdef from sound/core.h
  ALSA: Remove struct snd_monitor_file from public sound/core.h
  ASoC: Remove unuused hw_read_t
  sound: oxygen: work around MCE when changing volume
  ALSA: dummy - Fake buffer allocations
  ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digital
  ASoC: fix pxa2xx-ac97.c breakage
  ALSA: dummy - Fix the timer calculation in systimer mode
  ALSA: dummy - Add more description
  ALSA: dummy - Better jiffies handling
  ALSA: dummy - Support high-res timer mode
  ALSA: Release v1.0.21
  ...

15 years agoMerge branch 'writeback' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 11 Sep 2009 16:17:05 +0000 (09:17 -0700)]
Merge branch 'writeback' of git://git.kernel.dk/linux-2.6-block

* 'writeback' of git://git.kernel.dk/linux-2.6-block:
  writeback: check for registered bdi in flusher add and inode dirty
  writeback: add name to backing_dev_info
  writeback: add some debug inode list counters to bdi stats
  writeback: get rid of pdflush completely
  writeback: switch to per-bdi threads for flushing data
  writeback: move dirty inodes from super_block to backing_dev_info
  writeback: get rid of generic_sync_sb_inodes() export

15 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 11 Sep 2009 16:16:39 +0000 (09:16 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (54 commits)
  [S390] tape: Use pr_xxx instead of dev_xxx in shared driver code
  [S390] Wire up page fault events for software perf counters.
  [S390] Remove smp_cpu_not_running.
  [S390] Get rid of cpuid.h header file.
  [S390] Limit cpu detection to 256 physical cpus.
  [S390] tape: Fix device online messages
  [S390] Enable guest page hinting by default.
  [S390] use generic scatterlist.h
  [S390] s390dbf: Add description for usage of "%s" in sprintf events
  [S390] Initialize __LC_THREAD_INFO early.
  [S390] fix recursive locking on page_table_lock
  [S390] kvm: use console_initcall() to initialize s390 virtio console
  [S390] tape: reversed order of labels
  [S390] hypfs: Use "%u" instead of "%d" for unsigned ints in snprintf
  [S390] kernel: Print an error message if kernel NSS cannot be defined
  [S390] zcrypt: Free ap_device if dev_set_name fails.
  [S390] zcrypt: Use spin_lock_bh in suspend callback
  [S390] xpram: Remove checksum validation for suspend/resume
  [S390] vmur: Invalid allocation sequence for vmur class
  [S390] hypfs: remove useless variable qname
  ...

15 years agoMerge branch 'kmemleak' of git://linux-arm.org/linux-2.6
Linus Torvalds [Fri, 11 Sep 2009 16:16:22 +0000 (09:16 -0700)]
Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6

* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Improve the "Early log buffer exceeded" error message
  kmemleak: fix sparse warning for static declarations
  kmemleak: fix sparse warning over overshadowed flags
  kmemleak: move common painting code together
  kmemleak: add clear command support
  kmemleak: use bool for true/false questions
  kmemleak: Do no create the clean-up thread during kmemleak_disable()
  kmemleak: Scan all thread stacks
  kmemleak: Don't scan uninitialized memory when kmemcheck is enabled
  kmemleak: Ignore the aperture memory hole on x86_64
  kmemleak: Printing of the objects hex dump
  kmemleak: Do not report alloc_bootmem blocks as leaks
  kmemleak: Save the stack trace for early allocations
  kmemleak: Mark the early log buffer as __initdata
  kmemleak: Dump object information on request
  kmemleak: Allow rescheduling during an object scanning

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Fri, 11 Sep 2009 15:58:32 +0000 (08:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (48 commits)
  RDMA/iwcm: Reject the connection when the cm_id is destroyed
  RDMA/cxgb3: Clean up properly on FW mismatch failures
  RDMA/cxgb3: Don't ignore insert_handle() failures
  MAINTAINERS: InfiniBand/RDMA mailing list transition to vger
  IB/mad: Allow tuning of QP0 and QP1 sizes
  IB/mad: Fix possible lock-lock-timer deadlock
  RDMA/nes: Map MTU to IB_MTU_* and correctly report link state
  RDMA/nes: Rework the disconn routine for terminate and flushing
  RDMA/nes: Use the flush code to fill in cqe error
  RDMA/nes: Make poll_cq return correct number of wqes during flush
  RDMA/nes: Use flush mechanism to set status for wqe in error
  RDMA/nes: Implement Terminate Packet
  RDMA/nes: Add CQ error handling
  RDMA/nes: Clean out CQ completions when QP is destroyed
  RDMA/nes: Change memory allocation for cqp request to GFP_ATOMIC
  RDMA/nes: Allocate work item for disconnect event handling
  RDMA/nes: Update refcnt during disconnect
  IB/mthca: Don't allow userspace open while recovering from catastrophic error
  IB/mthca: Distinguish multiple devices in /proc/interrupts
  IB/mthca: Annotate CQ locking
  ...

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Fri, 11 Sep 2009 15:55:49 +0000 (08:55 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (57 commits)
  binfmt_elf: fix PT_INTERP bss handling
  TPM: Fixup boot probe timeout for tpm_tis driver
  sysfs: Add labeling support for sysfs
  LSM/SELinux: inode_{get,set,notify}secctx hooks to access LSM security context information.
  VFS: Factor out part of vfs_setxattr so it can be called from the SELinux hook for inode_setsecctx.
  KEYS: Add missing linux/tracehook.h #inclusions
  KEYS: Fix default security_session_to_parent()
  Security/SELinux: includecheck fix kernel/sysctl.c
  KEYS: security_cred_alloc_blank() should return int under all circumstances
  IMA: open new file for read
  KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]
  KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]
  KEYS: Do some whitespace cleanups [try #6]
  KEYS: Make /proc/keys use keyid not numread as file position [try #6]
  KEYS: Add garbage collection for dead, revoked and expired keys. [try #6]
  KEYS: Flag dead keys to induce EKEYREVOKED [try #6]
  KEYS: Allow keyctl_revoke() on keys that have SETATTR but not WRITE perm [try #6]
  KEYS: Deal with dead-type keys appropriately [try #6]
  CRED: Add some configurable debugging [try #6]
  selinux: Support for the new TUN LSM hooks
  ...

15 years agokmemleak: Improve the "Early log buffer exceeded" error message
Catalin Marinas [Fri, 11 Sep 2009 09:42:09 +0000 (10:42 +0100)]
kmemleak: Improve the "Early log buffer exceeded" error message

Based on a suggestion from Jaswinder, clarify what the user would need
to do to avoid this error message from kmemleak.

Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
15 years ago[S390] tape: Use pr_xxx instead of dev_xxx in shared driver code
Michael Holzheu [Fri, 11 Sep 2009 08:29:07 +0000 (10:29 +0200)]
[S390] tape: Use pr_xxx instead of dev_xxx in shared driver code

For messages from the tape core that is shared between the 3590 and 34xx
tape disciplines, we want to have the "tape" prefix instead of "tape_3590"
or "tape_34xx". In order to fix this, we now use the pr_xxx printk macros.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] Wire up page fault events for software perf counters.
Heiko Carstens [Fri, 11 Sep 2009 08:29:06 +0000 (10:29 +0200)]
[S390] Wire up page fault events for software perf counters.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] Remove smp_cpu_not_running.
Heiko Carstens [Fri, 11 Sep 2009 08:29:05 +0000 (10:29 +0200)]
[S390] Remove smp_cpu_not_running.

smp_cpu_not_running() and cpu_stopped() are doing the same.
Remove one and also get rid of the last hard_smp_processor_id() leftover.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] Get rid of cpuid.h header file.
Heiko Carstens [Fri, 11 Sep 2009 08:29:04 +0000 (10:29 +0200)]
[S390] Get rid of cpuid.h header file.

Merge cpuid.h header file into cpu.h.
While at it convert from typedef to struct declaration and also
convert cio code to use proper lowcore structure instead of casts.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] Limit cpu detection to 256 physical cpus.
Heiko Carstens [Fri, 11 Sep 2009 08:29:03 +0000 (10:29 +0200)]
[S390] Limit cpu detection to 256 physical cpus.

Saves us more than 65k pointless IPIs.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] tape: Fix device online messages
Michael Holzheu [Fri, 11 Sep 2009 08:29:02 +0000 (10:29 +0200)]
[S390] tape: Fix device online messages

Currently, when a tape device is set online and no cartridge is loaded, we
get the messages "The tape cartridge has been successfully unloaded" and
"Determining the size of the recorded area". These messages are not correct.
To fix this, we now print the "cartridge loaded/unloaded" messages only,
when the load/unload event really occurs. In addition to that, the message
"Determining the size of the recorded area" is only printed, if a cartridge
is loaded.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] Enable guest page hinting by default.
Heiko Carstens [Fri, 11 Sep 2009 08:29:01 +0000 (10:29 +0200)]
[S390] Enable guest page hinting by default.

Get rid of the PAGE_STATES config option and enable guest page hinting
by default.
It can be disabled by specifying "cmma=off" at the command line.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] use generic scatterlist.h
Heiko Carstens [Fri, 11 Sep 2009 08:29:00 +0000 (10:29 +0200)]
[S390] use generic scatterlist.h

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] s390dbf: Add description for usage of "%s" in sprintf events
Michael Holzheu [Fri, 11 Sep 2009 08:28:59 +0000 (10:28 +0200)]
[S390] s390dbf: Add description for usage of "%s" in sprintf events

Using "%s" in sprintf event functions is dangerous. This patch adds a short
description for this issue to the s390 debug feature documentation.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] Initialize __LC_THREAD_INFO early.
Heiko Carstens [Fri, 11 Sep 2009 08:28:58 +0000 (10:28 +0200)]
[S390] Initialize __LC_THREAD_INFO early.

"lockdep: Fix backtraces" reveales a bug in early setup code: when
lockdep tries to save a stack backtrace before setup_arch has been
called the lowcore pointer for the current thread info pointer isn't
initialized yet.
However our save stack backtrace code relies on it. If the pointer
isn't initialized the saved backtrace will have zero entries.
lockdep however relies (correctly) on the fact that that cannot
happen.
A write access to some random memory region is the result.

Fix this by initializing the thread info pointer early.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] fix recursive locking on page_table_lock
Martin Schwidefsky [Fri, 11 Sep 2009 08:28:57 +0000 (10:28 +0200)]
[S390] fix recursive locking on page_table_lock

Suzuki Poulose reported the following recursive locking bug on s390:

Here is the stack trace : (see Appendix I for more info)

  [<0000000000406ed6>] _spin_lock+0x52/0x94
  [<0000000000103bde>] crst_table_free+0x14e/0x1a4
  [<00000000001ba684>] __pmd_alloc+0x114/0x1ec
  [<00000000001be8d0>] handle_mm_fault+0x2cc/0xb80
  [<0000000000407d62>] do_dat_exception+0x2b6/0x3a0
  [<0000000000114f8c>] sysc_return+0x0/0x8
  [<00000200001642b2>] 0x200001642b2

The page_table_lock is already acquired in __pmd_alloc (mm/memory.c) and
it tries to populate the pud/pgd with a new pmd allocated. If another
thread populates it before we get a chance, we free the pmd using
pmd_free().

On s390x, pmd_free(even pud_free ) is #defined to crst_table_free(),
which acquires the page_table_lock to protect the crst_table index updates.

Hence this ends up in a recursive locking of the page_table_lock.

The solution suggested by Dave Hansen is to use a new spin lock in the mmu
context to protect the access to the crst_list and the pgtable_list.

Reported-by: Suzuki Poulose <suzuki@in.ibm.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] kvm: use console_initcall() to initialize s390 virtio console
Hendrik Brueckner [Fri, 11 Sep 2009 08:28:56 +0000 (10:28 +0200)]
[S390] kvm: use console_initcall() to initialize s390 virtio console

Use a console_initcall() to initialize the s390 virtio console and
clean up s390 console initialization in setup.c.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] tape: reversed order of labels
Roel Kluin [Fri, 11 Sep 2009 08:28:55 +0000 (10:28 +0200)]
[S390] tape: reversed order of labels

Fix the order of goto labels in tape_generic_online.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
15 years ago[S390] hypfs: Use "%u" instead of "%d" for unsigned ints in snprintf
Michael Holzheu [Fri, 11 Sep 2009 08:28:54 +0000 (10:28 +0200)]
[S390] hypfs: Use "%u" instead of "%d" for unsigned ints in snprintf

For printing unsigned integers hypfs uses "%d" in snprintf(). This is wrong.
With this patch "%u" is used instead.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] kernel: Print an error message if kernel NSS cannot be defined
Hendrik Brueckner [Fri, 11 Sep 2009 08:28:53 +0000 (10:28 +0200)]
[S390] kernel: Print an error message if kernel NSS cannot be defined

If a named saved system (NSS) cannot be defined or saved, print out an
error message with the return code of the underlying z/VM CP command.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>