[media] v4l2-ctrls.h: add to device-drivers DocBook

The comments there are using a wrong format. Due to that,
DocBook were unable to parse it.

Fix the tags format, and add it to device-drivers.xml.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] DocBook: add dvb_ringbuffer.h to documentation

There are already some comments at dvb_ringbuffer.h that are ready
for DocBook, although not properly formatted.

Convert them, fix some issues and add this file to
the device-drivers DocBook.

While here, put multi-line comments on the right format.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] DocBook: add dvb_math.h to documentation

There are already some comments at dvb_math.h that are ready
for DocBook, although not properly formatted.

Convert them, fix some issues and add this file to
the device-drivers DocBook.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] DocBook: add dvb_frontend.h to documentation

There are already some comments at dvb_frontend.h that are ready
for DocBook, although not properly formatted.

Convert them, and add this file to the device-drivers DocBook.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] DocBook: add dvb_ca_en50221.h to documentation

There are already some tags at dvb_ca_en50221.h, but using a
different format. Convert them, fix a few entries and add
to the device-drivers DocBook.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] v4l2-subdev: add remaining argument descriptions

Warning(.//include/media/v4l2-subdev.h:203): No description found for parameter 'ioctl'
Warning(.//include/media/v4l2-subdev.h:203): No description found for parameter 'compat_ioctl32'
Warning(.//include/media/v4l2-subdev.h:203): No description found for parameter 'subscribe_event'
Warning(.//include/media/v4l2-subdev.h:203): No description found for parameter 'unsubscribe_event'
Warning(.//include/media/v4l2-subdev.h:273): No description found for parameter 's_stream'
Warning(.//include/media/v4l2-subdev.h:407): No description found for parameter 's_stream'
Warning(.//include/media/v4l2-subdev.h:623): No description found for parameter 'link_validate'
Warning(.//include/media/v4l2-subdev.h:623): No description found for parameter 'set_frame_desc'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] v4l2_subdev: describe ioctl parms at the remaining structs

Fixes the following warnings:

Warning(.//include/media/v4l2-subdev.h:445): No description found for parameter 'g_sliced_vbi_cap'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'enum_mbus_code'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'enum_frame_size'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'enum_frame_interval'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'get_fmt'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'set_fmt'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'get_selection'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'set_selection'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'get_edid'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'set_edid'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'dv_timings_cap'
Warning(.//include/media/v4l2-subdev.h:589): No description found for parameter 'enum_dv_timings'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] v4l2_subdev: describe ioctl parms at v4l2_subdev_video_ops

Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 'g_std'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 's_std'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 'querystd'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 'cropcap'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 'g_crop'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 's_crop'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 'g_parm'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 's_parm'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 'g_frame_interval'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 's_frame_interval'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 's_dv_timings'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 'g_dv_timings'
Warning(.//include/media/v4l2-subdev.h:381): No description found for parameter 'query_dv_timings'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] v4l2-subdev: reorder the v4l2_subdev_video_ops comments

The comments for struct v4l2_subdev_video_ops are out of the
order as the parameter would appear at struct. This is not
a problem for DocBook, but humans find harder to mentally
reorder ;)

So, put them at the right order. That makes easier to check
what's missing, and to put the comments in the right place.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] v4l2-subdev: Add description for radio ioctl handlers

Warning(.//include/media/v4l2-subdev.h:224): No description found for parameter 's_radio'
Warning(.//include/media/v4l2-subdev.h:224): No description found for parameter 's_frequency'
Warning(.//include/media/v4l2-subdev.h:224): No description found for parameter 'enum_freq_bands'
Warning(.//include/media/v4l2-subdev.h:224): No description found for parameter 'g_tuner'
Warning(.//include/media/v4l2-subdev.h:224): No description found for parameter 'g_modulator'
Warning(.//include/media/v4l2-subdev.h:224): No description found for parameter 's_modulator'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] v4l2-subdev: Add description for core ioctl handlers

Warning(.//include/media/v4l2-subdev.h:183): No description found for parameter 'queryctrl'
Warning(.//include/media/v4l2-subdev.h:183): No description found for parameter 'g_ctrl'
Warning(.//include/media/v4l2-subdev.h:183): No description found for parameter 's_ctrl'
Warning(.//include/media/v4l2-subdev.h:183): No description found for parameter 'g_ext_ctrls'
Warning(.//include/media/v4l2-subdev.h:183): No description found for parameter 's_ext_ctrls'
Warning(.//include/media/v4l2-subdev.h:183): No description found for parameter 'try_ext_ctrls'
Warning(.//include/media/v4l2-subdev.h:183): No description found for parameter 'querymenu'
Warning(.//include/media/v4l2-subdev.h:183): No description found for parameter 'g_register'
Warning(.//include/media/v4l2-subdev.h:183): No description found for parameter 's_register'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] v4l2-subdev: convert documentation to the right format

struct v4l2_subdev_core_ops has some kernel-doc-nano documentation
using a wrong format, with affects the number of stuff reported at
the DocBook device-drivers.xml.

Properly mark the such comment blocks using the right notation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] Docbook: Fix comments at v4l2-mem2mem.h

Warning(.//include/media/v4l2-mem2mem.h:50): No description found for parameter 'lock'
Warning(.//include/media/v4l2-mem2mem.h:50): No description found for parameter 'unlock'
Warning(.//include/media/v4l2-mem2mem.h:167): No description found for parameter 'm2m_ctx'
Warning(.//include/media/v4l2-mem2mem.h:177): No description found for parameter 'm2m_ctx'
Warning(.//include/media/v4l2-mem2mem.h:188): No description found for parameter 'm2m_ctx'
Warning(.//include/media/v4l2-mem2mem.h:197): No description found for parameter 'm2m_ctx'
Warning(.//include/media/v4l2-mem2mem.h:206): No description found for parameter 'm2m_ctx'
Warning(.//include/media/v4l2-mem2mem.h:215): No description found for parameter 'm2m_ctx'
Warning(.//include/media/v4l2-mem2mem.h:226): No description found for parameter 'm2m_ctx'
Warning(.//include/media/v4l2-mem2mem.h:235): No description found for parameter 'm2m_ctx'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] Docbook: fix comments at v4l2-flash-led-class.h

Warning(.//include/media/v4l2-flash-led-class.h:51): bad line:  unique in the system
Warning(.//include/media/v4l2-flash-led-class.h:56): bad line:  definitions are available in the header file
Warning(.//include/media/v4l2-flash-led-class.h:57): bad line:  <linux/led-class-flash.h>
Warning(.//include/media/v4l2-flash-led-class.h:122): No description found for parameter 'ops'
Warning(.//include/media/v4l2-flash-led-class.h:122): Excess function parameter 'flash_ops' description in 'v4l2_flash_init'
Warning(.//include/media/v4l2-flash-led-class.h:130): No description found for parameter 'v4l2_flash'
Warning(.//include/media/v4l2-flash-led-class.h:130): Excess function parameter 'flash' description in 'v4l2_flash_release'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] Docbook: Fix s_rx_carrier_range parameter description

Warning(.//include/media/rc-core.h:178): No description found for parameter 's_rx_carrier_range'
Warning(.//include/media/rc-core.h:178): Excess struct/union/enum/typedef member 's_rx_carrier' description in 'rc_dev'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] Docbook: Fix  comments at v4l2-async.h

Warning(.//include/media/v4l2-async.h:62): No description found for parameter 'match_type'
Warning(.//include/media/v4l2-async.h:62): Excess struct/union/enum/typedef member 'bus_type' description in 'v4l2_async_subdev'
Warning(.//include/media/v4l2-async.h:76): cannot understand function prototype: 'struct v4l2_async_notifier '

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] DocBook/media/Makefile: Avoid make htmldocs to fail

If make is called twice like that:
make V=1 DOCBOOKS=device-drivers.xml htmldocs

Make will fail with:

make -f ./scripts/Makefile.build obj=scripts/basic
rm -f .tmp_quiet_recordmcount
make -f ./scripts/Makefile.build obj=scripts build_docproc
make -f ./scripts/Makefile.build obj=Documentation/DocBook htmldocs
rm -rf Documentation/DocBook/index.html; echo '<h1>Linux Kernel HTML Documentation</h1>' >> Documentation/DocBook/index.html && echo '<h2>Kernel Version: 4.2.0-rc2</h2>' >> Documentation/DocBook/index.html && cat Documentation/DocBook/device-drivers.html >> Documentation/DocBook/index.html
cp ./Documentation/DocBook//bayer.png ./Documentation/DocBook//constraints.png ./Documentation/DocBook//crop.gif ./Documentation/DocBook//dvbstb.png ./Documentation/DocBook//fieldseq_bt.gif ./Documentation/DocBook//fieldseq_tb.gif ./Documentation/DocBook//nv12mt.gif ./Documentation/DocBook//nv12mt_example.gif ./Documentation/DocBook//pipeline.png ./Documentation/DocBook//selection.png ./Documentation/DocBook//vbi_525.gif ./Documentation/DocBook//vbi_625.gif ./Documentation/DocBook//vbi_hsync.gif ./Documentation/DocBook/media/*.svg ./Documentation/DocBook/media/v4l/*.svg ./Documentation/DocBook//media_api
cp: target './Documentation/DocBook//media_api' is not a directory
Documentation/DocBook/Makefile:53: recipe for target 'htmldocs' failed

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] Docbook: Fix description of struct media_devnode

Warning(.//include/media/media-devnode.h:80): No description found for parameter 'fops'
Warning(.//include/media/media-devnode.h:80): No description found for parameter 'dev'
Warning(.//include/media/media-devnode.h:80): No description found for parameter 'cdev'
Warning(.//include/media/media-devnode.h:80): No description found for parameter 'release'

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] DocBook/device-drivers: Add drivers/media core stuff

There are lots of docbook marks at the media subsystem, but
those aren't used.

Add the core headers/code in order to start generating docs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

[media] DocBook: fix an unbalanced <para> tag

The </para> got lost on some change at the DVB docbook, making
the tag unbalanced and causing a warning. Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>

Revert "[media] ARM: DT: STi: STiH407: Add c8sectpfe LinuxDVB DT node"

There are some missing dependencies at the DT, as it looks for
an I2C bus named "ssc2", but this is not defined.

Probably, it misses some dependencies from some other tree.
For now, revert this patch, to avoid build breakages.

This reverts commit 5d8877b6ae0d47897b821b8a11a2e8dee9a22686.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] horus3a: fix compiler warning

Shut up this compiler warning that I get during the daily build:

horus3a.c: In function 'horus3a_set_params':
horus3a.c:308:24: warning: 'rolloff' may be used uninitialized in this function [-Wmaybe-uninitialized]
     symbol_rate * (100 + rolloff), 200000) + 5;
                        ^

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] bt8xxx: Use monotonic time

Wall time obtained from do_gettimeofday is susceptible to sudden jumps due to
user setting the time or due to NTP.

Monotonic time is constantly increasing time better suited for comparing two
timestamps.

Signed-off-by: Abhilash Jindal <klock.android@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] zoran: Use monotonic time

Wall time obtained from do_gettimeofday is susceptible to sudden jumps due to
user setting the time or due to NTP.

Monotonic time is constantly increasing time better suited for comparing two
timestamps.

Signed-off-by: Abhilash Jindal <klock.android@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] i2c/adv7511: Fix license, set to GPL v2

Header claims GPL v2, so make the MODULE_LICENSE reflect that properly.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: rcar_vin: Reject videobufs that are too small for current format

In videobuf_setup reject buffers that are too small for the configured
format. Fixes v4l2-compliance issue.

Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Reviewed-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: rcar_vin: fill in bus_info field

Adapt rcar_vin_querycap() so that cap->bus_info is populated with
something meaningful/unique.

Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: soc_camera: rcar_vin: Add BT.709 24-bit RGB888 input support

This adds V4L2_MBUS_FMT_RGB888_1X24 input format support
which is used by the ADV7612 chip.

Modified to use MEDIA_BUS_FMT_* constants

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Reviewed-by: Rob Taylor <rob.taylor@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] tw68: Move PCI vendor and device IDs to pci_ids.h

This commits moves the Intersil/Techwell PCI vendor ID, and
the device IDs for the TW68 PCI video capture cards.

This will allow to support future Intersil/Techwell devices
without duplicating the IDs.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: Correctly notify about the failed pipeline validation

On the place of the source entity name, the sink entity name was printed.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l: omap3isp: Drop platform data support

Platforms using the OMAP3 ISP have all switched to DT, drop platform
data support.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] sr030pc30: don't read a new pointer

sr030pc30_get_fmt() can only succeed if both info->curr_win and
info->curr_fmt are not NULL.

If one of those vars are null, the curent code would call:
ret = sr030pc30_set_params(sd);

If the curr_win is null, it will return -EINVAL, as it would be
expected. However, if curr_fmt is NULL, the function won't
set it.

The code will then try to read from it:

        mf->code        = info->curr_fmt->code;
        mf->colorspace  = info->curr_fmt->colorspace;

with obviouly won't work.

This got reported by smatch:
drivers/media/i2c/sr030pc30.c:505 sr030pc30_get_fmt() error: we previously assumed 'info->curr_win' could be null (see line 499)
drivers/media/i2c/sr030pc30.c:507 sr030pc30_get_fmt() error: we previously assumed 'info->curr_fmt' could be null (see line 499)

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ov2659: get rid of unused values

Why to store the chosed values for prediv, postdiv and mult if
those won't be used?

drivers/media/i2c/ov2659.c: In function 'ov2659_pll_calc_params':
drivers/media/i2c/ov2659.c:912:35: warning: variable 's_mult' set but not used [-Wunused-but-set-variable]
  u32 s_prediv = 1, s_postdiv = 1, s_mult = 1;
                                   ^
drivers/media/i2c/ov2659.c:912:20: warning: variable 's_postdiv' set but not used [-Wunused-but-set-variable]
  u32 s_prediv = 1, s_postdiv = 1, s_mult = 1;
                    ^
drivers/media/i2c/ov2659.c:912:6: warning: variable 's_prediv' set but not used [-Wunused-but-set-variable]
  u32 s_prediv = 1, s_postdiv = 1, s_mult = 1;
      ^

This is likely some leftover from some past change.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ov9650: remove an extra space

drivers/media/i2c/ov9650.c:1439 ov965x_detect_sensor() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] tc358743: don't use variable length array for I2C writes

drivers/media/i2c/tc358743.c:148:19: warning: Variable length array is used.

As the maximum size is 1026, we can't use dynamic var, as it
would otherwise spend 1056 bytes of the stack at i2c_wr() function.

So, allocate a buffer with the allowed maximum size together with
the state var.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: use a new Kconfig menu for DVB platform drivers

While this is the first DVB platform drivers, let's keep the
Kconfig options well organized, adding it on its own DVB menu.

Of course, it should depend on MEDIA_DIGITAL_TV_SUPPORT, as
this enables all DVB-related menus.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] tda10071: use div_s64() when dividing a s64 integer

Otherwise, it will break on 32 bits archs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: fix pinctrl dependencies

compiling on some archs fail with:

drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:540:8: error: implicit declaration of function ‘pinctrl_select_state’ [-Werror=implicit-function-declaration]
  ret = pinctrl_select_state(fei->pinctrl, tsin->pstate);

That's due the need of including pinctrl.h header and because
CONFIG_PINCTRL needs to be true.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] Staging: media: lirc: use USB API functions rather than constants

This patch introduces the use of the function usb_endpoint_type.

The Coccinelle semantic patch that makes these changes is as follows:

@@ struct usb_endpoint_descriptor *epd; @@

- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] staging:media:lirc Remove the extra braces in if statement of lirc_imon

This patche removes the extra braces found in
drivers/staging/media/lirc/lirc_imon.c to fix the warning thrown by
checkpatch.pl

Signed-off-by: Pradheep Shrinivasan <pradheep.sh@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] coda: drop zero payload bitstream buffers

The buffers with zero payload are now dumped in coda_fill_bitstream and not
passed to coda_bitstream_queue. This avoids unnecessary fifo addition and
buffer sequence counter increment.

Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] staging: media: lirc: Export I2C module alias information

The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] Export I2C module alias information in missing drivers

The I2C core always reports the MODALIAS uevent as "i2c:<client name"
regardless if the driver was matched using the I2C id_table or the
of_match_table. So the driver needs to export the I2C table and this
be built into the module or udev won't have the necessary information
to auto load the correct module when the device is added.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: don't go past channel_data array

As reported by smatch:
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:365 find_channel() error: buffer overflow 'fei->channel_data' 8 <= 63

It seems that a cut-and-paste type of error occurred here:
the channel_data array size is C8SECTPFE_MAX_TSIN_CHAN, and not
C8SECTPFE_MAXCHANNEL.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: Allow compiling it with COMPILE_TEST

While it won't work, it is good to allow it to build with
COMPILE_TEST, as we can check if other patches would break
compilation for this driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] MAINTAINERS: Add c8sectpfe driver directory to STi section

Add the new c8sectpfe demux driver to the STi section of the
MAINTAINERS file.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: Add Kconfig and Makefile for the driver

This patch adds the Kconfig and Makefile for the c8sectpfe driver
so it will be built. It also selects additional demodulator and tuners
which are required by the supported NIM cards.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: Add c8sectpfe debugfs support

Some basic debugfs support to dump the IP registers. Further
statistics could easily be added in the future for example for
each enabled tsin channel we could expose number of corrupt packets
received etc.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: Add support for various ST NIM cards

This patch adds support for the following 2 NIM cards: -
1) B2100A (2x stv0367 demods & 2x NXP tda18212 tuners)
2) STV0903-6110NIM (stv0903 demod + 6110 tuner, lnb24)

A NIM card is a cold plugable expansion card which usually
features a demodulator / tuner combination.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: Add LDVB helper functions

These functions are used by the core code for creating the LDVB
devices and adapter.

Addtionally some older SoC's (and potentially newer ones) have different
frontend HW which would allow those devices to be easily supported
in the future by keeping the code specific to the IP separate from the
more generic code.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: STiH407/10 Linux DVB demux support

This patch adds support for the c8sectpfe input HW found on
STiH407/410 SoC's.

It currently supports the TS input block, memdma engine
and hw PID filtering blocks of the C8SECTPFE subsystem.

The driver creates one LinuxDVB adapter, and a
demux/dvr/frontend set of devices for each tsin channel
which is specificed in the DT. It has been tested with
multiple tsin channels tuned, locked, and grabbing TS
simultaneously.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ARM: DT: STi: STiH407: Add c8sectpfe LinuxDVB DT node

This patch adds in the required DT node for the c8sectpfe
Linux DVB demux driver which allows the tsin channels
to be used on an upstream kernel.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] c8sectpfe: Add DT bindings documentation for c8sectpfe driver

This patch adds the DT bindings documentation for the c8sectpfe LinuxDVB
demux driver whose IP is in the STiH407 family silicon SoC's.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dvb-pll: Convert struct dvb_pll_desc uses to const

Convert the struct dvb_pll_desc uses to const and
change the "entries" fixed array size from 12 to []

It saves a couple KB overall and remove ~5KB of data.

$ size drivers/media/dvb-frontends/dvb-pll.o*
   text        data     bss     dec     hex filename
   8520        1552    2120   12192    2fa0 drivers/media/dvb-frontends/dvb-pll.o.new
   5624        6363    2120   14107    371b drivers/media/dvb-frontends/dvb-pll.o.old

[PG] Patch taken from https://lkml.org/lkml/2015/6/24/721 with
commit message updated.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Michael Ira Krufky <m.krufky@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] stv0367: Add support for 16Mhz reference clock

The B2100A dvb NIM card from ST has 2x stv0367 demodulators
and 2x TDA18212 silicon tuners, with a 16Mhz crystal. To
get this working properly with the upstream driver we need
to add support for the 16Mhz reference clock.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] stv0367: Refine i2c error trace to include i2c address

When using stv0367 demodulator with STi STB platforms,
we can have easily have four or more stv0367 demods running
in the system at one time.

As typically the b2120 reference design ships with a b2004a daughter
board, which can accept two dvb NIM cards, and each b2100A NIM
has 2x stv0367 demods and 2x NXPs tuner on it.

In such circumstances it is useful to print the i2c address
on error messages to know which one is failing due to I2C issues.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ascot2e: don't use variable length arrays

The Linux stack is short; we need to be able to count the number
of bytes used at stack on each function. So, we don't like to
use variable-length arrays, as complained by smatch:
        drivers/media/dvb-frontends/horus3a.c:57:19: warning: Variable length array is used.

The max usecase of the driver seems to be 10 bytes + 1 for the
register.

So, let's be safe and allocate 11 bytes for the write buffer.
This should be enough to cover all cases. If not, let's print
an error message.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] horus3a: don't use variable length arrays

The Linux stack is short; we need to be able to count the number
of bytes used at stack on each function. So, we don't like to
use variable-length arrays, as complained by smatch:
drivers/media/dvb-frontends/horus3a.c:57:19: warning: Variable length array is used.

The max usecase of the driver seems to be 5 bytes + 1 for the
register.

So, let's be safe and allocate 6 bytes for the write buffer.
This should be enough to cover all cases. If not, let's print
an error message.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cxd2841er: don't use variable length arrays

The Linux stack is short; we need to be able to count the number
of bytes used at stack on each function. So, we don't like to
use variable-length arrays, as complained by smatch:

drivers/media/dvb-frontends/cxd2841er.c:205:19: warning: Variable length array is used.

The max usecase of the driver seems to be 15 bytes + 1 for the
register.

So, let's be safe and allocate 17 bytes for the write buffer.
This should be enough to cover all cases. If not, let's print
an error message.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver

Add NetUP Dual Universal CI PCIe board driver.
The board has
    - two CI slots
    - two I2C adapters
    - SPI master bus for accessing flash memory containing
      FPGA firmware

No changes required.

Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cxd2841er: declare static functions as such

drivers/media/dvb-frontends/cxd2841er.c:992:5: warning: no previous prototype for 'cxd2841er_get_carrier_offset_t2' [-Wmissing-prototypes]
 int cxd2841er_get_carrier_offset_t2(
     ^
drivers/media/dvb-frontends/cxd2841er.c:1032:5: warning: no previous prototype for 'cxd2841er_get_carrier_offset_c' [-Wmissing-prototypes]
 int cxd2841er_get_carrier_offset_c(
     ^
drivers/media/dvb-frontends/cxd2841er.c:1360:5: warning: no previous prototype for 'cxd2841er_read_snr_t2' [-Wmissing-prototypes]
 int cxd2841er_read_snr_t2(struct cxd2841er_priv *priv, u32 *snr)
     ^

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] cxd2841er: Sony CXD2841ER DVB-S/S2/T/T2/C demodulator driver

Add DVB-C/T/T2/S/S2 demodulator frontend driver Sony CXD2841ER chip.

Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] lnbh25: LNBH25 SEC controller driver

Add DVB SEC frontend driver for STM LNBH25PQR chip.

[mchehab@osg.samsung.com: fix merge conflict:
 fe_sec_voltage_t should not be used in kernelspace anymore.
 instead, it should use enum fe_sec_voltage]
Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ascot2e: Sony Ascot2e DVB-C/T/T2 tuner driver

Add DVB-T/T2/C frontend driver for Sony Ascot2e (CXD2861ER) chip.

Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] horus3a: Sony Horus3A DVB-S/S2 tuner driver

Add DVB-S/S2 frontend driver for Sony Horus3A (CXD2832AER) chip

Signed-off-by: Kozlov Sergey <serjk@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] Technisat SkyStar USB HD,(DVB-S/S2) too much URBs for arm devices

Using 8 URBs results in a consecutive buffer allocation of too much
memory for some arm devices.
As we use isochronuous transfers the number of URBs can be reduced
without risking data-loss.

Signed-off-by: Christian Loepke <loepke@edfritsch.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] rc-core: improve the lirc protocol reporting

Commit 275ddb40bcf686d210d86c6718e42425a6a0bc76 removed the lirc
"protocol" but kept backwards compatibility by always listing
the protocol as present and enabled. This patch further improves
the logic by only listing the protocol if the lirc module is loaded
(or if lirc is builtin).

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] staging: Drop owner assignment from i2c_driver

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] staging: iio: Drop owner assignment from i2c_driver

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] staging: media: Drop owner assignment from i2c_driver

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] Drop owner assignment from i2c_driver

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] tuners: Drop owner assignment from i2c_driver

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] radio: Drop owner assignment from i2c_driver

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] i2c: Drop owner assignment from i2c_driver

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dvb-frontends: Drop owner assignment from platform_driver

platform_driver does not need to set an owner because
platform_driver_register() will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dvb-frontends: Drop owner assignment from i2c_driver

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] pctv452e: Replace memset with eth_zero_addr

Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Note that the 6 in the third argument of memset appears to represent
an ethernet address size (ETH_ALEN).

The Coccinelle semantic patch that makes this change is as follows:

// <smpl>
@eth_zero_addr@
expression e;
@@

-memset(e,0x00,6);
+eth_zero_addr(e);
// </smpl>

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] tuners: Make all TV tuners visible if COMPILE_TEST=y

Make the TV tuners menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.

Without this, many drivers stay disabled during e.g. allmodconfig.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] ttpci: Replace memset with eth_zero_addr

Use eth_zero_addr to assign the zero address to the given address
array instead of memset when second argument is address of zero.
Note that the 6 in the third argument of memset appears to represent
an ethernet address size (ETH_ALEN).

The Coccinelle semantic patch that makes this change is as follows:

// <smpl>
@eth_zero_addr@
expression e;
@@

-memset(e,0x00,6);
+eth_zero_addr(e);
// </smpl>

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] usb/airspy: removing unneeded goto

This patch removes unneded goto,
reported by coccinelle.

Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Akhilesh Kumar <akhilesh.k@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] i2c: Make all i2c devices visible if COMPILE_TEST=y

Make the i2c devices menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.

Without this, many drivers stay disabled during e.g. allmodconfig.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] dvb-frontends: Make all DVB Frontends visible if COMPILE_TEST=y

Make the DVB Frontends menu visible when compile-testing, to allow
selecting additional drivers on top of the drivers that are already
automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled.

Without this, many drivers stay disabled during e.g. allmodconfig.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] x86/mm/pat, drivers/media/ivtv: move pat warn and replace WARN() with pr_warn()

On built-in kernels this warning will always splat as this is part
of the module init. Fix that by shifting the PAT requirement check
out under the code that does the "quasi-probe" for the device. This
device driver relies on an existing driver to find its own devices,
it looks for that device driver and its own found devices, then
uses driver_for_each_device() to try to see if it can probe each of
those devices as a frambuffer device with ivtvfb_init_card(). We
tuck the PAT requiremenet check then on the ivtvfb_init_card()
call making the check at least require an ivtv device present
before complaining.

Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot]
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] s5c73m3: Remove redundant spi driver bus initialization

In ancient times it was necessary to manually initialize the bus
field of an spi_driver to spi_bus_type. These days this is done in
spi_register_driver(), so we can drop the manual assignment.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] pci/Kconfig: don't use MEDIA_ANALOG_TV_SUPPORT for grabber cards

I noticed certain cards are currently under MEDIA_ANALOG_TV_SUPPORT
but it seems they are frame grabbers (with CVBS, Svideo etc. inputs)
rather than TV receivers (with analog TV tuners).

MEDIA_CAMERA_SUPPORT maybe isn't the best name (only "meye" driver seems
to drive a real camera in a laptop) but it at least doesn't select the
TUNERs.

Perhaps the following patch would make sense.

Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mantis: remove an uneeded goto

Gotos makes a little harder to check the code. In this
particular case, the goto is doing nothing but jumping into
a return.

Instead, just replace the goto by the return, making it
simpler.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mantis: Fix error handling in mantis_dma_init()

Current code assigns 0 to variable 'err', which makes mantis_dma_init()
to return success even if mantis_alloc_buffers() fails.

Fix it by checking the return value from mantis_alloc_buffers() and
propagating it in the case of error.

Reported-by: RUC_Soft_Sec <zy900702@163.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mt9v032: fix uninitialized variable warning

drivers/media/i2c/mt9v032.c: In function ‘mt9v032_probe’:
  CC [M]  drivers/media/i2c/s5k4ecgx.o
drivers/media/i2c/mt9v032.c:996:20: warning: ‘pdata’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  if (pdata && pdata->link_freqs) {
                    ^

It can indeed be uninitialized in one corner case. Initialize to NULL.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] v4l2: move tracepoint generation into separate file

To compile videobuf2-core as a module, the vb2_* tracepoints must be
exported from the videodev module. Instead of exporting vb2 tracepoint
symbols from v4l2-ioctl.c, move the tracepoint generation into a separate
file. This patch fixes the following build error in the modpost stage,
introduced by 2091f5181c66 ("[media] videobuf2: add trace events"):

    ERROR: "__tracepoint_vb2_buf_done" undefined!
    ERROR: "__tracepoint_vb2_dqbuf" undefined!
    ERROR: "__tracepoint_vb2_qbuf" undefined!
    ERROR: "__tracepoint_vb2_buf_queue" undefined!

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] vivid: support cvt, gtf timings for video out

The generation of cvt, gtf timings is already supported by v4l2-ctl.
This patch adds support for setting cvt,gtf timings for video out.
While enabling cvt,gtf in vivid capture, the vivid video out was
missed out. Adding it now.

Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: adv7604: reduce support to first (digital) input

Using adv7611_read_cable_det() for ADV7612 means that full
support for '.max_port = ADV7604_PAD_HDMI_PORT_B,' isn't available
due to the need for multiple port reads to determine cable detection,
and an agreed mechanism for communicating the separate statuses.

This patch replaces adv7611_read_cable_det() with a functionally
identical copy, commented appropriately.

Earlier submissions [leading to commit 8331d30b] also set .cp_csc,
which is used in a cp_read() call within adv76xx_log_status().

Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] media: adv7604: fix probe of ADV7611/7612

Prior to commit f862f57d ("[media] media: i2c: ADV7604: Migrate to
regmap"), the local variable 'val' contained the combined register
reads used in the chipset version ID test. Restore this expectation
so that the comparison works as it used to.

Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] soc_camera: always release queue for queue owner

Always release the queue if the owner closes its filehandle and not when
it is the last open filehandle.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] soc_camera: pass on streamoff error

If streamoff returned an error, then pass that on to the caller.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] soc_camera: compliance fixes

- REQBUFS(0) will stop streaming, free buffers and release the file ownership.
- Return ENOTTY for create_bufs for a vb1 driver
- Return EBUSY if there is a different streaming owner and set the new owner on
  success.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] soc_camera: fix expbuf support

- For vb1 drivers just return -ENOTTY.
- For vb2 drivers allow vb2_expbuf without there being a stream owner:
  the vb2_expbuf function will return the correct error message in that case.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] soc_camera: fix enum_input

Fill in the std field from the video_device tvnorms field.

This fixes a v4l2-compliance failure.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] sh_mobile_ceu_camera: set field to FIELD_NONE

Make sure that 'field' isn't FIELD_ANY when the driver is
first loaded. Fixes a v4l2-compliance failure.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] sh_mobile_ceu_camera: fix querycap

Fill in the bus_info and driver fields. Found by v4l2-compliance.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

[media] mt9t112: JPEG -> SRGB

The JPEG colorspace should only be used for JPEG encoded images. This is
just a regular sRGB sensor.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>