[PATCH] md: expose md metadata format in sysfs

Allow it to be set to a particular version, or 'none'.

Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: allow md array component size to be accessed and set via sysfs

Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: allow chunk_size to be settable through sysfs

... only before array is started of course.

Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fix rdev->pending counts in raid1

When we do a user-requested check/repair, we lose count of the outstanding
requests...

Also make sure that when anything is written to md/sync_action, the
RECOVERY_NEEDED flag is set and the thread is woken up so any changes take
effect.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: make sure bitmap updates are visible through filesystem

When we update a page_cache page in the kernel, we need to flush_dache_page or
userspace might not see the change.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/md/md.c: make md_new_event() static

Make the needlessly global function md_new_event() static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: make a couple of names in md.c static

.. because they aren't used outside md.c

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fix typo in comment

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: helper function to match commands written to sysfs files

Commands written to sysfs files may, or my not, be \n terminated.  We want to
accept with case.  For this we use cmd_match.

Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: define and use safe_put_page for md

md sometimes call put_page on NULL pointers (treating it like kfree).  This is
not safe, so define and use a 'safe_put_page' which checks for NULL.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: remove inappropriate limits in md/bitmap configuration.

The kernel should not be imposing these policy limits: The time between
bitmap updates should certainly be allowed to be more than 15 seconds, and
if someone wants a bitmap chunk size in excess of 4MB, the kernel isn't the
place to stop them.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fix possible problem in raid1/raid10 error overwriting

The code to overwrite/reread for addressing read errors in raid1/raid10
currently assumes that the read will not alter the buffer which could be used
to write to the next device.  This is not a safe assumption to make.

So we split the loops into a overwrite loop and a separate re-read loop, so
that the writing is complete before reading is attempted.

Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: remove personality numbering from md

md supports multiple different RAID level, each being implemented by a
'personality' (which is often in a separate module).

These personalities have fairly artificial 'numbers'.  The numbers
are use to:
 1- provide an index into an array where the various personalities
    are recorded
 2- identify the module (via an alias) which implements are particular
    personality.

Neither of these uses really justify the existence of personality numbers.
The array can be replaced by a linked list which is searched (array lookup
only happens very rarely).  Module identification can be done using an alias
based on level rather than 'personality' number.

The current 'raid5' modules support two level (4 and 5) but only one
personality.  This slight awkwardness (which was handled in the mapping from
level to personality) can be better handled by allowing raid5 to register 2
personalities.

With this change in place, the core md module does not need to have an
exhaustive list of all possible personalities, so other personalities can be
added independently.

This patch also moves the check for chunksize being non-zero into the ->run
routines for the personalities that need it, rather than having it in core-md.
 This has a side effect of allowing 'faulty' and 'linear' not to have a
chunk-size set.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: break out of a loop that doesn't need to run to completion

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: convert recently exported symbol to GPL

...because that seems to be the preferred practice these days.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: convert various kmap calls to kmap_atomic

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: tidy up raid5/6 hash table code

- replace open-coded hash chain with hlist macros

- Fix hash-table size at one page - it is already quite generous, so there
  will never be a need to use multiple pages, so no need for __get_free_pages

No functional change.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: convert md to use kzalloc throughout

Replace multiple kmalloc/memset pairs with kzalloc calls.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: clean up 'page' related names in md

Substitute:

  page_cache_get -> get_page
  page_cache_release -> put_page
  PAGE_CACHE_SHIFT -> PAGE_SHIFT
  PAGE_CACHE_SIZE -> PAGE_SIZE
  PAGE_CACHE_MASK -> PAGE_MASK
  __free_page -> put_page

because we aren't using the page cache, we are just using pages.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: make /proc/mdstat pollable

With this patch it is possible to poll /proc/mdstat to detect arrays appearing
or disappearing, to detect failures, recovery starting, recovery completing,
and devices being added and removed.

It is similar to the poll-ability of /proc/mounts, though different in that:

We always report that the file is readable (because face it, it is, even if
only for EOF).

We report POLLPRI when there is a change so that select() can detect
it as an exceptional event.  Not only are these exceptional events, but
that is the mechanism that the current 'mdadm' uses to watch for events
(It also polls after a timeout).
(We also report POLLERR like /proc/mounts).

Finally, we only reset the per-file event counter when the start of the file
is read, rather than when poll() returns an event.  This is more robust as it
means that an fd will continue to report activity to poll/select until the
program clearly responds to that activity.

md_new_event takes an 'mddev' which isn't currently used, but it will be soon.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: raid10 read-error handling - resync and read-only

Add in correct read-error handling for resync and read-only situations.

When read-only, we don't over-write, so we need to mark the failed drive in
the r10_bio so we don't re-try it.  During resync, we always read all blocks,
so if there is a read error, we simply over-write it with the good block that
we found (assuming we found one).

Note that the recovery case still isn't handled in an interesting way.  There
is nothing useful to do for the 2-copies case.  If there are 3 or more copies,
then we could try reading from one of the non-missing copies, but this is a
bit complicated and very rarely would be used, so I'm leaving it for now.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: auto-correct correctable read errors in raid10

Largely just a cross-port from raid1.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: make sure read error on last working drive of raid1 actually returns failure

We are inadvertently setting the R1BIO_Uptodate bit on read errors when we
decide not to try correcting (because there are no other working devices).
This means that the read error is reported to the client as success.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: allow raid1 to check consistency

Where performing a user-requested 'check' or 'repair', we read all readable
devices, and compare the contents.  We only write to blocks which had read
errors, or blocks with content that differs from the first good device found.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: support check-without-repair of raid10 arrays

Also keep count on the number of errors found.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fix up some rdev rcu locking in raid5/6

There is this "FIXME" comment with a typo in it!!  that been annoying me for
days, so I just had to remove it.

conf->disks[i].rdev should only be accessed if
  - we know we hold a reference or
  - the mddev->reconfig_sem is down or
  - we have a rcu_readlock

handle_stripe was referencing rdev in three places without any of these.  For
the first two, get an rcu_readlock.  For the last, the same access
(md_sync_acct call) is made a little later after the rdev has been claimed
under and rcu_readlock, if R5_Syncio is set.  So just use that access...
However R5_Syncio isn't really needed as the 'syncing' variable contains the
same information.  So use that instead.

Issues, comment, and fix are identical in raid5 and raid6.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: handle errors when read-only

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: better handling for read error in raid1 during resync

Handling of read errors during resync is separate from handling of read errors
during normal IO in raid1.  A previous patch added support for read errors
during normal IO.  This one adds support for read errors during resync or
recovery.

The key differences are that we don't need to freeze the array, because the
normal handling of resync means that this part of the array will be idle
except for resync, and the read/overwrite/re-read is needed in a separate
piece of code.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: tidyup some issues with raid1 resync and prepare for catching read errors

We are dereferencing ->rdev without an rcu lock!

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: attempt to auto-correct read errors in raid1

On a read-error we suspend the array, then synchronously read the block from
other arrays until we find one where we can read it.  Then we try writing the
good data back everywhere and make sure it works.  If any write or subsequent
read fails, only then do we fail the device out of the array.

To be able to suspend the array, we need to also keep track of how many
requests are queued for handling by raid1d.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: improve handing of read errors with raid6

This is a simple port of match functionality across from raid5.  If we get a
read error, we don't kick the drive straight away, but try to over-write with
good data first.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: fix raid6 resync check/repair code

raid6 currently does not check the P/Q syndromes when doing a resync, it just
calculates the correct value and writes it.  Doing the check can reduce writes
(often to 0) for a resync, and it is needed to properly implement the

  echo check > sync_action

operation.

This patch implements the appropriate checks and tidies up some related code.

It also allows raid6 user-requested resync to bypass the intent bitmap.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: write intent bitmap support for raid10

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: move bitmap_create to after md array has been initialised

This is important because bitmap_create uses
  mddev->resync_max_sectors
and that doesn't have a valid value until after the array
has been initialised (with pers->run()).
[It doesn't make a difference for current personalities that
 support bitmaps, but will make a difference for raid10]

This has the added advantage of meaning with can move the thread->timeout
manipulation inside the bitmap.c code instead of sprinkling identical code
throughout all personalities.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: allow dirty raid[456] arrays to be started at boot

See patch to md.txt for more details

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: small cleanups for raid5

Resync code:
  A test that isn't needed,
  a 'compute_block' that makes more sense
    elsewhere (And then doesn't need a test),
  a couple of BUG_ONs to confirm the change makes sense.

Printks:
  A few were missing KERN_*

Also fix a typo in a comment..

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: improve raid10 "IO Barrier" concept

raid10 needs to put up a barrier to new requests while it does resync or other
background recovery.  The code for this is currently open-coded, slighty
obscure by its use of two waitqueues, and not documented.

This patch gathers all the related code into 4 functions, and includes a
comment which (hopefully) explains what is happening.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] md: improve raid1 "IO Barrier" concept

raid1 needs to put up a barrier to new requests while it does resync or other
background recovery.  The code for this is currently open-coded, slighty
obscure by its use of two waitqueues, and not documented.

This patch gathers all the related code into 4 functions, and includes a
comment which (hopefully) explains what is happening.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] make dm-mirror not issue invalid resync requests

I've been attempting to set up a (Host)RAID mirror with dm_mirror on
2.6.14.3, and I've been having a strange little problem.  The configuration
in question is a set of 9GB SCSI disks that have 17942584 sectors.  I set
up the dm_mirror table as such:

0 17942528 mirror core 2 2048 nosync 2 8:48 0 8:64 0

If I'm not mistaken, this sets up a 9GB RAID1 mriror with 1MB stripes
across both SCSI disks.  The sector count of the dm device is less than the
size of the disks, so we shouldn't fall off the end.  However, I always get
the messages like this in dmesg when I set up the dm table:

attempt to access beyond end of device
sdd: rw=0, want=17958656, limit=17942584

Clearly, something is trying to read sectors past the end of the drive.  I
traced it down to the __rh_recovery_prepare function in dm-raid1.c, which
gets called when we're putting the mirror set together.  This function
calls the dirty region log's get_resync_work function to see if there's any
resync that needs to be done, and queues up any areas that are out of sync.
 The log's get_resync_work function is actually a pointer to the
core_get_resync_work function in dm-log.c.

The core_get_resync_work function queries a bitset lc->sync_bits to find
out if there are any regions that are out of date (i.e.  the bit is 0),
which is where the problem occurs.  If every bit in lc->sync_bits is 1
(which is the case when we've just configured a new RAID1 with the nosync
option), the find_next_zero_bit does NOT return the size parameter
(lc->region_count in this case), it returns the size parameter rounded up
to the nearest multiple of 32!  I don't know if this is intentional, but
i386 and x86_64 both exhibit this behavior.

In any case, the statement "if (*region == lc->region_count)" looks like
it's supposed to catch the case where are no regions to resync and
return 0.  Since find_next_zero_bit apparently has a habit of returning
a value that's larger than lc->region_count, the enclosed patch changes
the equality test to a greater-than test so that we don't try to resync
areas outside of the RAID1 region.  Seeing as the HostRAID metadata
lives just past the end of the RAID1 data, mucking around in that area
is not a good idea.

I suppose another way to fix this would be to amend find_next_zero_bit so
that it doesn't return values larger than "size", but I don't know if
there's a reason for the current behavior.

Signed-Off-By: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] dm-crypt: zero key before freeing it

Zap the memory before freeing it so we don't leave crypto information
around in memory.

Signed-off-by: Stefan Rompf <stefan@loplof.de>
Acked-by: Clemens Fruhwirth <clemens@endorphin.org>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] drivers/md/kcopyd.c: #if 0 kcopyd_cancel()

This patch #if 0's the not yet implemented global function kcopyd_cancel().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper ioctl: add skip lock_fs flag

Add ioctl DM_SKIP_LOCKFS_FLAG for userspace to request that lock_fs is
bypassed when suspending a device.

There's no change to the behaviour of existing code that doesn't know about
the new flag.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: make lock_fs optional

Devices only needs syncing when creating snapshots, so make this optional when
suspending a device.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: rename frozen_bdev

Rename frozen_bdev to suspended_bdev and move the bdget outside lockfs.  (This
prepares for making lockfs optional.)

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper raid1: add default mirror

This patch introduces a new field to the mirror_set (default_mirror) to store
the default mirror.

(A subsequent patch will allow us to change the default mirror in the event of
a failure.)

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: scanf sector format change

Use %llu not %Lu in sscanf/printf format strings.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: remove unused definition

This patch removes an unused #define.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper snapshot: metadata reading separation

More snapshot metadata reading into separate function, to prepare for changing
the place it gets called from.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper ioctl: event on rename

After changing the name of a mapped device, trigger a dm event.  (For
userspace multipath tools.)

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: add dm_get_md

Add dm_get_dev() to get a mapped device given its dev_t.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] device-mapper: add dm_find_md

Abstract dm_find_md() from dm_get_mdptr() to allow use elsewhere.

Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] knfsd: reduce stack consumption

A typical nfsd call trace is
 nfsd -> svc_process -> nfsd_dispatch -> nfsd3_proc_write ->
   nfsd_write ->nfsd_vfs_write -> vfs_writev

These add up to over 300 bytes on the stack.
Looking at each of these, I see that nfsd_write (which includes
 nfsd_vfs_write) contributes 0x8c to stack usage itself!!

It turns out this is because it puts a 'struct iattr' on the stack so
it can kill suid if needed.  The following patch saves about 50 bytes
off the stack in this call path.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] knfsd: check error status from vfs_getattr and i_op->fsync

Both vfs_getattr and i_op->fsync return error statuses which nfsd was
largely ignoring.  This as noticed when exporting directories using fuse.

This patch cleans up most of the offences, which involves moving the call
to vfs_getattr out of the xdr encoding routines (where it is too late to
report an error) into the main NFS procedure handling routines.

There is still a called to vfs_gettattr (related to the ACL code) where the
status is ignored, and called to nfsd_sync_dir don't check return status
either.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] Keep nfsd from exiting when seeing recv() errors

I submitted this one previously - svc_tcp_recvfrom currently returns
any errors to the caller, including ECONNRESET and the like.

This is something svc_recv isn't able to deal with:

len = svsk->sk_recvfrom(rqstp);
[...]
if (len == 0 || len == -EAGAIN) {
[...]
return -EAGAIN;
}

[...]
return len;

The nfsd main loop will exit when it sees an error code other than
EAGAIN.

The following patch fixes this problem

svc_recv is not equipped to deal with error codes other than EAGAIN,
and will propagate anything else (such as ECONNRESET) up to nfsd,
causing it to exit.

Signed-off-by: Olaf Kirch <okir@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] jbd: split checkpoint lists

Split the checkpoint list of the transaction into two lists.  In the first
list we keep the buffers that need to be submitted for IO.  In the second
list are kept buffers that were already submitted and we just have to wait
for the IO to complete.  This should simplify a handling of checkpoint
lists a bit and can eventually be also a performance gain.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] kernel/module.c: removed dead code

This patch fixes an issue reported by Coverity in kernel/module.c

Error reported: Cannot reach this line of code "else return ptr;"

Patch description:
  This is the error path, so 'err' will be negative, the else case
  is not required, this patch removes it.

Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fix remaining list_for_each_safe_rcu in -mm (take 2)

I missed a use of list_for_each_rcu_safe() in -mm tree.  Here is an updated
patch to fix it.  This time tested on a machine that actually uses IPMI...
(Thanks to Serge Hallyn for spotting this.)

Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] include/linux/parport_pc.h: "extern inline" -> "static inline"

"extern inline" doesn't make much sense.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] simplify PARPORT_PC_PCMCIA dependencies

Unless I miss something, this should be the simplest way to express the
intended dependencies.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: export parport_get_port()

Help external ppSCSI driver by exporting parport_get_port to match the
parport_put_port.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: include fixes

Small cleanup of includes meant for older implementation.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: Kconfig dependency fixes

Make drivers that use directly PC parport HW depend on PARPORT_PC rather than
HW independent PARPORT.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: DEBUG_PARPORT build fix

Add missing "struct" keyword preventing compilation with DEBUG_PARPORT
defined.  Also add some "const".

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: constification

Trivial "const" additions to places in parport that truly are const.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: use complete slab buffer

Use the complete slab buffer that is allocated by kmalloc.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: parport_daisy_select return value fix

parport_daisy_select returned wrong status that is read at wrong time
during daisy command execution.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: daisy chain device id reading fix

Device ID reading from daisy chain devices failed because the daisy
device could not be opened.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: daisy chain end detection fix

Daisy chain end detection failed at least with older daisy chain devices that
do not implement the last device signal.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: phase fixes

Did not move the parport interface properly into IEEE1284_PH_REV_IDLE phase at
end of data due to comparing bytes with nibbles.  Internal phase
IEEE1284_PH_HBUSY_DNA became unused, so remove it.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] parport: buffer overflow fix

Fix potential buffer overflow in case the device ID did not end in semicolon.
Also might fail to negotiate back to IEEE1284_MODE_COMPAT in case of failure.
parport_device_id did not return what Documentation/parport-lowlevel.txt said,
so I changed it to match it.

Determining device ID length is overly complicated, but Tim Waugh recalled on
linux-parport seeing some buggy device that might need it.

Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: check file type in lookup

Previously invalid types were quietly changed to regular files, but at
revalidation the inode was changed to bad.  This was rather inconsistent
behavior.

Now check if the type is valid on initial lookup, and return -EIO if not.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: ensure progress in read and write

In direct_io mode, send at least one page per reqest.  Previously it was
possible that reqests with zero data were sent, and hence the read/write
didn't make any progress, resulting in an infinite (though interruptible)
loop.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: make maximum write data configurable

Make the maximum size of write data configurable by the filesystem.  The
previous fixed 4096 limit only worked on architectures where the page size is
less or equal to this.  This change make writing work on other architectures
too, and also lets the filesystem receive bigger write requests in direct_io
mode.

Normal writes which go through the page cache are still limited to a page
sized chunk per request.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: clean up request size limit checking

Change the way a too large request is handled.  Until now in this case the
device read returned -EINVAL and the operation returned -EIO.

Make it more flexibible by not returning -EINVAL from the read, but restarting
it instead.

Also remove the fixed limit on setxattr data and let the filesystem provide as
large a read buffer as it needs to handle the extended attribute data.

The symbolic link length is already checked by VFS to be less than PATH_MAX,
so the extra check against FUSE_SYMLINK_MAX is not needed.

The check in fuse_create_open() against FUSE_NAME_MAX is not needed, since the
dentry has already been looked up, and hence the name already checked.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: fail file operations on bad inode

Make file operations on a bad inode fail.  This just makes things a
bit more consistent.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: add code documentation

Document some not-so-trivial functions.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: support caching negative dentries

Add support for caching negative dentries.

Up till now, ->d_revalidate() always forced a new lookup on these.  Now let
the lookup method return a zero node ID (not used for anything else) meaning a
negative entry, but with a positive cache timeout.  The old way of signaling
negative entry (replying ENOENT) still works.

Userspace should check the ABI minor version to see whether sending a zero ID
is allowed by the kernel or not.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: add frsize to statfs reply

Add 'frsize' member to the statfs reply.

I'm not sure if sending f_fsid will ever be needed, but just in case leave
some space at the end of the structure, so less compatibility mess would be
required.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: bump interface version

Change interface version to 7.4.

Following changes will need backward compatibility support, so store the minor
version returned by userspace.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: clean up page offset calculation

Use page_offset() instead of doing page offset calculation by hand.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] fuse: clean up fuse_lookup()

Simplify fuse_lookup() and related functions.

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] I2O: Lindent run

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] I2O: Optimizing

- make i2o_iop_free() static inline (from Adrian Bunk)

- changed kmalloc() + memset(0) into kzalloc()

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] I2O: Beautifying

Fix some typos and minor code beautifying.

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] I2O: Bugfixes

- Removed some kmalloc's with __GFP_ZERO and replace it with memset()
  because it didn't work properly.

- Fixed returned message frame in i2o_cfg_passthru() which caused raidutils
  to display wrong error message in case a disk was missing.

- Fixed size of printk() in i2o_scsi.c.

- Fixed get_device() and put_device() in probing of the I2O controller.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] I2O: Remove wrong I2O device class

Removed wrong I2O device class, which was only needed to add sysfs attributes.

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] I2O: SPARC fixes

Fix lot of BE <-> LE bugs which prevent it from working on SPARC.

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] I2O: changed I2O API to create I2O messages in kernel memory

Changed the I2O API to create I2O messages first in kernel memory and then
transfer it at once over the PCI bus instead of sending each quad-word over
the PCI bus.

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: cleanup Kconfig

Sanitize some s390 Kconfig options.  We have ARCH_S390, ARCH_S390X,
ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT.  Replace these 6 options by
S390, 64BIT and COMPAT.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: fix invalid return code in sclp_cpi

When the sclp_cpi module is loaded on a system which does not support the
required SCLP call (e.g.  on z/VM), ENOSUPP is returned to user space.  The
correct return value is EOPNOTSUPP.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: Fix missing release function and cosmetic changes

- Use kzalloc() in blacklist.c.
- Kill unwanted casts in blacklist.c.
- Provide release function for struct channel_subsystem.

Signed-off-by: Cornelia Huck <huckc@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: add support for cex2a crypto cards

Signed-off-by: Eric Rossman <edrossma@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: multiple subchannel sets support

Add support for multiple subchannel sets.  Works with arbitrary devices in
subchannel set 1 and is transparent to device drivers.  Although currently
only two subchannel sets are available, this will work with the architectured
maximum number of subchannel sets as well.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: convert /proc/cio_ignore

Convert /proc/cio_ignore to a sequential file.  This makes multiple subchannel
sets support easier.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: introduce struct channel_subsystem

struct channel_subsystem encapsulates several per channel subsystem
properties, like status of chpids or the global path group id.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: introduce for_each_subchannel

for_each_subchannel() is an iterator calling a function for every possible
subchannel id until non-zero is returned.  Convert the current iterating
functions to it.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: introduce struct subchannel_id

This patch introduces a struct subchannel_id containing the subchannel number
(formerly referred to as "irq") and switches code formerly relying on the
subchannel number over to it.

While we're touching inline assemblies anyway, make sure they have correct
memory constraints.

Signed-off-by: Cornelia Huck <cohuck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: qdio V=V pass-through

New feature V=V qdio pass-through.

QDIO and HiperSockets processing in z/VM V=V guest environments (as well as
V=R with z/VM running in LPAR mode) requires shadowing of all QDIO
architecture queue elements.  Especially the shadowing of SBALs and SLSBs
structures in the hypervisor, and the need to issue SIGA SYNC operations to
observe state changes, eventually causes significant CPU processing overhead
in the hypervisor.

The QDIO pass-through support for V=V guests avoids the shadowing of SBALs and
SLSBs.  This significantly reduces the hypervisor overhead for QDIO based I/O.

Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: in-kernel crypto test vectors

Add new test vectors to the AES test suite for AES CBC and AES with plaintext
larger than AES blocksize.

Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] s390: aes support

Add support for the hardware accelerated AES crypto algorithm.

Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>