GitHub/LineageOS/android_kernel_motorola_exynos9610.git
14 years agonet: maintain namespace isolation between vlan and real device
Arnd Bergmann [Sat, 30 Jan 2010 12:23:03 +0000 (12:23 +0000)]
net: maintain namespace isolation between vlan and real device

In the vlan and macvlan drivers, the start_xmit function forwards
data to the dev_queue_xmit function for another device, which may
potentially belong to a different namespace.

To make sure that classification stays within a single namespace,
this resets the potentially critical fields.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/rds: remove uses of NIPQUAD, use %pI4
Joe Perches [Tue, 2 Feb 2010 12:43:59 +0000 (12:43 +0000)]
net/rds: remove uses of NIPQUAD, use %pI4

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Grover <andy.grover@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agomISDN: positive error return should be negative in mode_hfcmulti()
Roel Kluin [Tue, 2 Feb 2010 12:43:47 +0000 (12:43 +0000)]
mISDN: positive error return should be negative in mode_hfcmulti()

The error return should be negative.  Its only caller that acts upon its
return, handle_bmsg(), transmits the positive error but can also return
negative errors.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoisdn: mISDN, don't compile unused stuff
Jiri Slaby [Tue, 2 Feb 2010 12:43:46 +0000 (12:43 +0000)]
isdn: mISDN, don't compile unused stuff

Remove these compiler warnings:

drivers/isdn/hardware/mISDN/w6692.c:534: warning: `setvolume' defined but not used
drivers/isdn/hardware/mISDN/w6692.c:561: warning: `enable_pots' defined but not used

by moving the functions inside #if 0 ...  #endif.  And an alternative is
to remove them completely if nobody has plans to use them.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agohardware/mISDN/mISDNinfineon.c: bail out of loop on error
Darren Jenkins [Tue, 2 Feb 2010 12:43:45 +0000 (12:43 +0000)]
hardware/mISDN/mISDNinfineon.c: bail out of loop on error

If setup_instance() fails we kfree() the card, and then use it in the next
loop iteration.  So lets bail out of the loop instead.

Coverity CID: 13357

Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agohisax: timeout off by one in waitrecmsg()
Roel Kluin [Tue, 2 Feb 2010 12:43:44 +0000 (12:43 +0000)]
hisax: timeout off by one in waitrecmsg()

With `while (timeout++ < maxdelay)' timeout reaches maxdelay + 1 after the
loop This is probably unlikely a problem in practice.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlge: Add check for eeh failure when closing device.
Ron Mercer [Wed, 3 Feb 2010 07:24:12 +0000 (07:24 +0000)]
qlge: Add check for eeh failure when closing device.

Fix crash where resources are freed twice on an eeh recovery failure.
If eeh recovery fails we set a flag to indicate to close() that
resources have been freed.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlge: Move reset from eeh io_resume to slot_reset.
Ron Mercer [Wed, 3 Feb 2010 07:24:11 +0000 (07:24 +0000)]
qlge: Move reset from eeh io_resume to slot_reset.

Issue asic reset and verify functionality before continuing to the
resume call.  This allows proper error code to be returned in the case
the asic does not recover.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: Make descriptor ring allocations NUMA-aware
PJ Waskiewicz [Wed, 3 Feb 2010 14:19:12 +0000 (14:19 +0000)]
ixgbe: Make descriptor ring allocations NUMA-aware

This patch allocates the ring structures themselves on each
NUMA node along with the buffer_info structures.  This way we
don't allocate the entire ring memory on a single node in one
big block, thus reducing NUMA node memory crosstalk.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: Allocate driver resources per NUMA node
Jesse Brandeburg [Wed, 3 Feb 2010 14:18:50 +0000 (14:18 +0000)]
ixgbe: Allocate driver resources per NUMA node

The default policy for the current driver is to do all its memory
allocation on whatever processor is running insmod/modprobe.  This
is less than optimal.

This driver's default mode of operation will be to use each node for each
subsequent transmit/receive queue.  The most efficient allocation will be
to then have the interrupts bound in such a way as to match up the
interrupt of the queue to the cpu where its memory was allocated.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoe1000: call pci_save_state after pci_restore_state
Nick Nunley [Wed, 3 Feb 2010 14:49:48 +0000 (14:49 +0000)]
e1000: call pci_save_state after pci_restore_state

This patch adds a call to pci_save_state() immediately after
the call to pci_restore_state(). Due to a change in the behavior
of pci_restore_state() it is necessary to call pci_save_state()
to keep the state_saved flag. This patch is based on a similar
patch for ixgbe.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoe1000: Report link status in ethtool when interface is down
Nick Nunley [Wed, 3 Feb 2010 14:49:28 +0000 (14:49 +0000)]
e1000: Report link status in ethtool when interface is down

With this change ethtool will correctly report link status when
the interface is down. Currently ethtool reports the link as not
detected when the interface is down.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: only process one ixgbe_watchdog_task at a time.
John Fastabend [Wed, 3 Feb 2010 14:23:32 +0000 (14:23 +0000)]
ixgbe: only process one ixgbe_watchdog_task at a time.

Processing multiple ixgbe_watchdog_task calls may cause
the link_up variable and IXGBE_FLAG_NEED_LINK_UPDATE flag
to be set incorrectly.  In the worse case this is causing
the netif_carrier_off to be called inappropriately which
results in an interface that can't be brought up.

Although schedule_work() will only schedule the task if
it is not already on the work queue the WORK_STRUCT_PENDING
bits are cleared just before calling the work function.
This allows WORK_STRUCT_PENDING to be cleared, the work
function to start and meanwhile schedule another task.

This patch adds a mutex to the watchdog task. This bug is
actualized by changing DCB settings or doing extended
cable pull or reset tests.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Thu, 4 Feb 2010 03:38:22 +0000 (19:38 -0800)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

14 years agoixgbe: Fix return of invalid txq
Krishna Kumar [Wed, 3 Feb 2010 13:13:10 +0000 (13:13 +0000)]
ixgbe: Fix return of invalid txq

a developer had complained of getting lots of warnings:

"eth16 selects TX queue 98, but real number of TX queues is 64"

http://www.mail-archive.com/e1000-devel@lists.sourceforge.net/msg02200.html

As there was no follow up on that bug, I am submitting this
patch assuming that the other return points will not return
invalid txq's, and also that this fixes the bug (not tested).

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: Fix ixgbe_tx_map error path
Anton Blanchard [Wed, 3 Feb 2010 13:12:51 +0000 (13:12 +0000)]
ixgbe: Fix ixgbe_tx_map error path

Commit e5a43549f7a58509a91b299a51337d386697b92c (ixgbe: remove
skb_dma_map/unmap calls from driver) looks to have introduced a bug in
ixgbe_tx_map. If we get an error from a PCI DMA call, we loop backwards
through count until it becomes -1 and return that.

The caller of ixgbe_tx_map expects 0 on error, so return that instead.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonetxen: protect resource cleanup by rtnl lock
Amit Kumar Salecha [Tue, 2 Feb 2010 04:16:21 +0000 (04:16 +0000)]
netxen: protect resource cleanup by rtnl lock

o context resources can be in used, while resource cleanup is in progress,
  during fw recover.
o Null pointer execption can occur in send_cmd_desc, if fw recovery
  module frees tx ring without rtnl lock.
o Same applies to ethtool register dump.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonetxen: fix tx timeout recovery for NX2031 chip
Amit Kumar Salecha [Tue, 2 Feb 2010 04:16:20 +0000 (04:16 +0000)]
netxen: fix tx timeout recovery for NX2031 chip

For NX2031, first try to scrub interrupt before requesting firmware
reset. Return statement was missing after scrubbbing interrupt.

Signed-off-by: Vernon Mauery <vernux@us.ibm.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Do not include unneeded headers
Ben Hutchings [Wed, 3 Feb 2010 09:32:06 +0000 (09:32 +0000)]
sfc: Do not include unneeded headers

Earlier refactoring has made these inclusions unnecessary.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Fix some incorrect or redundant comments
Ben Hutchings [Wed, 3 Feb 2010 09:31:57 +0000 (09:31 +0000)]
sfc: Fix some incorrect or redundant comments

In particular, the comment about EVQ_RPTR_REG is based on inconsistent
preliminary hardware documentation, though the following code was
fixed long before release.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Remove declarations of nonexistent functions
Ben Hutchings [Wed, 3 Feb 2010 09:31:46 +0000 (09:31 +0000)]
sfc: Remove declarations of nonexistent functions

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Add some missing bits to register self-test masks
Steve Hodgson [Wed, 3 Feb 2010 09:31:40 +0000 (09:31 +0000)]
sfc: Add some missing bits to register self-test masks

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Survive ISR0=0 bug in the shared IRQ case
Guido Barzini [Wed, 3 Feb 2010 09:31:24 +0000 (09:31 +0000)]
sfc: Survive ISR0=0 bug in the shared IRQ case

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Implement NVRAM selftest for SFC9000 family
Ben Hutchings [Wed, 3 Feb 2010 09:31:01 +0000 (09:31 +0000)]
sfc: Implement NVRAM selftest for SFC9000 family

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Replace PHY MDIO test with an 'alive' test
Ben Hutchings [Wed, 3 Feb 2010 09:30:50 +0000 (09:30 +0000)]
sfc: Replace PHY MDIO test with an 'alive' test

SFC9000-family boards do not all use MDIO PHYs, so we need a different
test for PHY aliveness.

Introduce a PHY operation test_alive().  For PHYs attached to Falcon,
use a common implementation based on the existing PHY MDIO test.
For PHYs managed through MCDI, use the appropriate MCDI request.

Change test name in ethtool from 'core mdio' to 'phy alive'.

Rename test_results::mdio to phy_alive and test_results::phy to phy_ext.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Enable autonegotiated flow-control by default if supported
Steve Hodgson [Wed, 3 Feb 2010 09:30:38 +0000 (09:30 +0000)]
sfc: Enable autonegotiated flow-control by default if supported

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Handle firmware assertion failure while resetting
Steve Hodgson [Wed, 3 Feb 2010 09:30:17 +0000 (09:30 +0000)]
sfc: Handle firmware assertion failure while resetting

This allows the driver to recover if the MC firmware has crashed due
to an assertion failure.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosfc: Update MCDI protocol definitions
Ben Hutchings [Wed, 3 Feb 2010 09:28:14 +0000 (09:28 +0000)]
sfc: Update MCDI protocol definitions

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodccp: fix auto-loading of dccp(_probe)
Gerrit Renker [Tue, 2 Feb 2010 20:16:56 +0000 (20:16 +0000)]
dccp: fix auto-loading of dccp(_probe)

This fixes commit (38ff3e6bb987ec583268da8eb22628293095d43b) ("dccp_probe:
Fix module load dependencies between dccp and dccp_probe", from 15 Jan).

It fixes the construction of the first argument of try_then_request_module(),
where only valid return codes from the first argument should be returned.

What we do now is assign the result of register_jprobe() to ret, without
the side effect of the comparison.

Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodccp: fix bug in cache allocation
Gerrit Renker [Mon, 1 Feb 2010 02:12:19 +0000 (02:12 +0000)]
dccp: fix bug in cache allocation

This fixes a bug introduced in commit de4ef86cfce60d2250111f34f8a084e769f23b16
("dccp: fix dccp rmmod when kernel configured to use slub", 17 Jan): the
vsnprintf used sizeof(slab_name_fmt), which became truncated to 4 bytes, since
slab_name_fmt is now a 4-byte pointer and no longer a 32-character array.

This lead to error messages such as
 FATAL: Error inserting dccp: No buffer space available

 >> kernel: [ 1456.341501] kmem_cache_create: duplicate cache cci
generated due to the truncation after the 3rd character.

Fixed for the moment by introducing a symbolic constant. Tested to fix the bug.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net/amd8111e.c: Fix continuation line formats
Joe Perches [Sun, 31 Jan 2010 10:02:09 +0000 (10:02 +0000)]
drivers/net/amd8111e.c: Fix continuation line formats

String constants that are continued on subsequent lines with \
are not good.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agocan: add support for CAN interface cards based on the PLX90xx PCI bridge
Pavel Cheblakov [Mon, 1 Feb 2010 09:42:44 +0000 (09:42 +0000)]
can: add support for CAN interface cards based on the PLX90xx PCI bridge

This driver is for CAN interface cards based on the PLX90xx PCI bridge.
Driver supports now:
 - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
 - Adlink PCI-7841/cPCI-7841 SE card
 - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
 - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)

Changes since v1:
 - Added some defines for static inline int plx_pci_check_sja1000(...)
 - static struct pci_device_id plx_pci_tbl[] replaced by
   static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl)
 - Typo fixed

Signed-off-by: Pavel Cheblakov <P.B.Cheblakov@inp.nsk.su>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agocxgb3: add memory barriers
Divy Le Ray [Mon, 1 Feb 2010 10:29:29 +0000 (10:29 +0000)]
cxgb3: add memory barriers

Add memory barriers to fix crashes observed on newest PowerPC platforms.
The HW and driver state of the receive rings were getting out of sync.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosky2: fix transmit DMA map leakage
stephen hemminger [Mon, 1 Feb 2010 13:41:47 +0000 (13:41 +0000)]
sky2: fix transmit DMA map leakage

The book keeping structure for transmit always had the flags value
cleared so transmit DMA maps were never released correctly.
Based on patch by Jarek Poplawski, problem observed by Michael Breuer.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMCS7830 USB-Ether: resume _with_ working link, via .reset_resume support
Andreas Mohr [Sun, 31 Jan 2010 02:58:42 +0000 (02:58 +0000)]
MCS7830 USB-Ether: resume _with_ working link, via .reset_resume support

ChangeLog:
Implement .reset_resume support to retain a live network connection
during suspend despite USB power loss.
- rework operation to reference cached data in mcs7830_data and
  netdev->dev_addr
- update netdev->dev_addr only in case new MAC was set successfully
. Tests done:
  . ethtool -d pre-/post-suspend: register values match
  . running ssh session suspend, resume: works
  . ifdown device, suspend, resume: works
  . ifup, suspend, unplug, resume: WORKS (eth1 is removed, re-ifup of eth1
    after card replug works)
  . verified identical MAC in ifconfig post-resume
    (ok, should be verified on network side to be fully certain...)

Keywords: suspend resume network connection dead interface down

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMCS7830 USB-Ether: change register define
Andreas Mohr [Sun, 31 Jan 2010 02:58:33 +0000 (02:58 +0000)]
MCS7830 USB-Ether: change register define

ChangeLog:
- rename register, add comment

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMCS7830 USB-Ether: Spelling corrections
Andreas Mohr [Sun, 31 Jan 2010 02:58:26 +0000 (02:58 +0000)]
MCS7830 USB-Ether: Spelling corrections

ChangeLog:
- spelling corrections / whitespace

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMCS7830 USB-Ether: add Rx error support
Andreas Mohr [Sun, 31 Jan 2010 02:58:19 +0000 (02:58 +0000)]
MCS7830 USB-Ether: add Rx error support

ChangeLog:
- evaluate Rx error statistics from trailing Rx status byte
- add driver TODO list
- add myself to authors

Quilt series run-tested, based on 2.6.33-rc4 (net-2.6.git mcs7830 has idle history,
should be good to go).

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonetlink: fix for too early rmmod
Alexey Dobriyan [Sat, 30 Jan 2010 10:05:05 +0000 (10:05 +0000)]
netlink: fix for too early rmmod

Netlink code does module autoload if protocol userspace is asking for is
not ready. However, module can dissapear right after it was autoloaded.
Example: modprobe/rmmod stress-testing and xfrm_user.ko providing NETLINK_XFRM.

netlink_create() in such situation _will_ create userspace socket and
_will_not_ pin module. Now if module was removed and we're going to call
->netlink_rcv into nothing:

BUG: unable to handle kernel paging request at ffffffffa02f842a
       ^^^^^^^^^^^^^^^^
modules are loaded near these addresses here

IP: [<ffffffffa02f842a>] 0xffffffffa02f842a
PGD 161f067 PUD 1623063 PMD baa12067 PTE 0
Oops: 0010 [#1] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/uevent
CPU 1
Pid: 11515, comm: ip Not tainted 2.6.33-rc5-netns-00594-gaaa5728-dirty #6 P5E/P5E
RIP: 0010:[<ffffffffa02f842a>]  [<ffffffffa02f842a>] 0xffffffffa02f842a
RSP: 0018:ffff8800baa3db48  EFLAGS: 00010292
RAX: ffff8800baa3dfd8 RBX: ffff8800be353640 RCX: 0000000000000000
RDX: ffffffff81959380 RSI: ffff8800bab7f130 RDI: 0000000000000001
RBP: ffff8800baa3db58 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000011
R13: ffff8800be353640 R14: ffff8800bcdec240 R15: ffff8800bd488010
FS:  00007f93749656f0(0000) GS:ffff880002300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffffffa02f842a CR3: 00000000ba82b000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process ip (pid: 11515, threadinfo ffff8800baa3c000, task ffff8800bab7eb30)
Stack:
 ffffffff813637c0 ffff8800bd488000 ffff8800baa3dba8 ffffffff8136397d
<0> 0000000000000000 ffffffff81344adc 7fffffffffffffff 0000000000000000
<0> ffff8800baa3ded8 ffff8800be353640 ffff8800bcdec240 0000000000000000
Call Trace:
 [<ffffffff813637c0>] ? netlink_unicast+0x100/0x2d0
 [<ffffffff8136397d>] netlink_unicast+0x2bd/0x2d0

netlink_unicast_kernel:
nlk->netlink_rcv(skb);

 [<ffffffff81344adc>] ? memcpy_fromiovec+0x6c/0x90
 [<ffffffff81364263>] netlink_sendmsg+0x1d3/0x2d0
 [<ffffffff8133975b>] sock_sendmsg+0xbb/0xf0
 [<ffffffff8106cdeb>] ? __lock_acquire+0x27b/0xa60
 [<ffffffff810a18c3>] ? might_fault+0x73/0xd0
 [<ffffffff810a18c3>] ? might_fault+0x73/0xd0
 [<ffffffff8106db22>] ? __lock_release+0x82/0x170
 [<ffffffff810a190e>] ? might_fault+0xbe/0xd0
 [<ffffffff810a18c3>] ? might_fault+0x73/0xd0
 [<ffffffff81344c77>] ? verify_iovec+0x47/0xd0
 [<ffffffff8133a509>] sys_sendmsg+0x1a9/0x360
 [<ffffffff813c2be5>] ? _raw_spin_unlock_irqrestore+0x65/0x70
 [<ffffffff8106aced>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff813c2bc2>] ? _raw_spin_unlock_irqrestore+0x42/0x70
 [<ffffffff81197004>] ? __up_read+0x84/0xb0
 [<ffffffff8106ac95>] ? trace_hardirqs_on_caller+0x145/0x190
 [<ffffffff813c207f>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8100262b>] system_call_fastpath+0x16/0x1b
Code:  Bad RIP value.
RIP  [<ffffffffa02f842a>] 0xffffffffa02f842a
 RSP <ffff8800baa3db48>
CR2: ffffffffa02f842a

If module was quickly removed after autoloading, return -E.

Return -EPROTONOSUPPORT if module was quickly removed after autoloading.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoaf_key: fix netns ops ordering on module load/unload
Alexey Dobriyan [Sat, 30 Jan 2010 02:53:27 +0000 (02:53 +0000)]
af_key: fix netns ops ordering on module load/unload

1. After sock_register() returns, it's possible to create sockets,
   even if module still not initialized fully (blame generic module code
   for that!)
2. Consequently, pfkey_create() can be called with pfkey_net_id still not
   initialized which will BUG_ON in net_generic():
kernel BUG at include/net/netns/generic.h:43!
3. During netns shutdown, netns ops should be unregistered after
   key manager unregistered because key manager calls can be triggered
   from xfrm_user module:

    general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
pfkey_broadcast+0x111/0x210 [af_key]
pfkey_send_notify+0x16a/0x300 [af_key]
km_state_notify+0x41/0x70
xfrm_flush_sa+0x75/0x90 [xfrm_user]
4. Unregister netns ops after socket ops just in case and for symmetry.

Reported by Luca Tettamanti.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoconnector: Delete buggy notification code.
Evgeniy Polyakov [Tue, 2 Feb 2010 23:58:48 +0000 (15:58 -0800)]
connector: Delete buggy notification code.

On Tue, Feb 02, 2010 at 02:57:14PM -0800, Greg KH (gregkh@suse.de) wrote:
> > There are at least two ways to fix it: using a big cannon and a small
> > one. The former way is to disable notification registration, since it is
> > not used by anyone at all. Second way is to check whether calling
> > process is root and its destination group is -1 (kind of priveledged
> > one) before command is dispatched to workqueue.
>
> Well if no one is using it, removing it makes the most sense, right?
>
> No objection from me, care to make up a patch either way for this?

Getting it is not used, let's drop support for notifications about
(un)registered events from connector.
Another option was to check credentials on receiving, but we can always
restore it without bugs if needed, but genetlink has a wider code base
and none complained, that userspace can not get notification when some
other clients were (un)registered.

Kudos for Sebastian Krahmer <krahmer@suse.de>, who found a bug in the
code.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: add loopback diagnostic test
Amit Kumar Salecha [Mon, 1 Feb 2010 05:25:00 +0000 (05:25 +0000)]
qlcnic: add loopback diagnostic test

Loopback test (offline) added in ethtool self test.
o Set device in loopback mode
o Send packets
o Process receive packets in qlcnic_process_rcv_ring_diag()
o Compare packets
o Reset device in normal mode.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: add interrupt diagnostic test
Amit Kumar Salecha [Mon, 1 Feb 2010 05:24:59 +0000 (05:24 +0000)]
qlcnic: add interrupt diagnostic test

Interrupt test (offline) added in ethtool self test.
Register a temporary interrupt handler and then send command to fw
to raise an interrupt.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: support LED blink for device identification
Sucheta Chakraborty [Mon, 1 Feb 2010 05:24:58 +0000 (05:24 +0000)]
qlcnic: support LED blink for device identification

Added support of device identification by blinking LED for specified time.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: protect resoruce cleanup by rtnl lock
Amit Kumar Salecha [Mon, 1 Feb 2010 05:24:57 +0000 (05:24 +0000)]
qlcnic: protect resoruce cleanup by rtnl lock

o context resources can be in used, while resoruce cleanup is in progress,
  during fw recover.
o Null pointer execption can occur in send_cmd_desc, if fw recovery
  module frees tx ring without rtnl lock.
o Same applies to ethtool register dump and FW health registers should be dump
  in any case.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: clear device reset state after fw recovery
Amit Kumar Salecha [Mon, 1 Feb 2010 05:24:56 +0000 (05:24 +0000)]
qlcnic: clear device reset state after fw recovery

o After firmware recovery, clear device reset state transition register.
  Otherwise firmware reload can occur unnecessary.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: add ethernet identifier in board info
Amit Kumar Salecha [Mon, 1 Feb 2010 05:24:55 +0000 (05:24 +0000)]
qlcnic: add ethernet identifier in board info

Added missing identifier that distinguishes between
FCOE/ISCSI/ETHERNET functions.

Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoqlcnic: use DEFINE_PCI_DEVICE_TABLE
Amit Kumar Salecha [Mon, 1 Feb 2010 05:24:54 +0000 (05:24 +0000)]
qlcnic: use DEFINE_PCI_DEVICE_TABLE

Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into
correct section in every case.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosky2: Fix TX_MAP_PAGE misspelling
Jarek Poplawski [Mon, 1 Feb 2010 00:19:07 +0000 (00:19 +0000)]
sky2: Fix TX_MAP_PAGE misspelling

Btw of the dma-debug problem reported by Michael Breuer I spotted
a tiny misspelling in TX_MAP_PAGE definition introduced by commit
6b84dacadbdc3.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agovirtio_net: Defer skb allocation in receive path Date: Wed, 13 Jan 2010 12:53:38...
Shirley Ma [Fri, 29 Jan 2010 03:20:04 +0000 (03:20 +0000)]
virtio_net: Defer skb allocation in receive path Date: Wed, 13 Jan 2010 12:53:38 -0800

virtio_net receives packets from its pre-allocated vring buffers, then it
delivers these packets to upper layer protocols as skb buffs. So it's not
necessary to pre-allocate skb for each mergable buffer, then frees extra
skbs when buffers are merged into a large packet. This patch has deferred
skb allocation in receiving packets for both big packets and mergeable buffers
to reduce skb pre-allocations and skb frees. It frees unused buffers by calling
detach_unused_buf in vring, so recv skb queue is not needed.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agovirtio: Add ability to detach unused buffers from vrings
Shirley Ma [Fri, 29 Jan 2010 03:19:05 +0000 (03:19 +0000)]
virtio: Add ability to detach unused buffers from vrings

There's currently no way for a virtio driver to ask for unused
buffers, so it has to keep a list itself to reclaim them at shutdown.
This is redundant, since virtio_ring stores that information.  So
add a new hook to do this.

Signed-off-by: Shirley Ma <xma@us.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoxfrm: avoid spinlock in get_acqseq()
Eric Dumazet [Fri, 29 Jan 2010 04:05:52 +0000 (04:05 +0000)]
xfrm: avoid spinlock in get_acqseq()

Use atomic_inc_return() in get_acqseq() to avoid taking a spinlock

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoipv4: ip_fragment: fix unbalanced rcu_read_unlock()
Patrick McHardy [Tue, 2 Feb 2010 19:46:50 +0000 (11:46 -0800)]
ipv4: ip_fragment: fix unbalanced rcu_read_unlock()

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
David S. Miller [Tue, 2 Feb 2010 17:04:58 +0000 (09:04 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/kaber/nf-2.6

14 years agobe2net: use eq-id to calculate cev-isr reg offset
Sathya Perla [Tue, 2 Feb 2010 15:48:40 +0000 (07:48 -0800)]
be2net: use eq-id to calculate cev-isr reg offset

cev-isr reg offset for each function is better calculated using (any) eq-id
alloted to that function instead of using pci-func number(which
does not work in some configurations...)

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/irda: sh_sir: Add SuperH IrDA driver
Kuninori Morimoto [Tue, 2 Feb 2010 15:47:56 +0000 (07:47 -0800)]
net/irda: sh_sir: Add SuperH IrDA driver

This is very simple IrDA SIR driver for SuperH.
This driver was tested by irdaping/ircp on SH7724 EcoVec24 board

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoigmp: fix ip_mc_sf_allow race [v5]
Flavio Leitner [Tue, 2 Feb 2010 15:32:29 +0000 (07:32 -0800)]
igmp: fix ip_mc_sf_allow race [v5]

Almost all igmp functions accessing inet->mc_list are protected by
rtnl_lock(), but there is one exception which is ip_mc_sf_allow(),
so there is a chance of either ip_mc_drop_socket or ip_mc_leave_group
remove an entry while ip_mc_sf_allow is running causing a crash.

Signed-off-by: Flavio Leitner <fleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agocan: deny filterlist access on non-CAN interfaces
Oliver Hartkopp [Tue, 2 Feb 2010 15:21:34 +0000 (07:21 -0800)]
can: deny filterlist access on non-CAN interfaces

In commit 20dd3850bcf860561496827b711fa10fecf6e787 "can: Speed up CAN frame
receiption by using ml_priv" the formerly used hlist of receiver lists for
each CAN netdevice has been replaced.

The hlist content ensured only CAN netdevices to be accessed by the
can_rx_(un)register() functions which accidently dropped away together with
the hlist receiver implementation.

This patch re-introduces the check for CAN netdevices in can_rx_(un)register().

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluet...
David S. Miller [Mon, 1 Feb 2010 07:34:58 +0000 (23:34 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/holtmann/bluetooth-2.6

14 years agotulip/xircom_cb.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:29 +0000 (20:59 +0000)]
tulip/xircom_cb.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME and xircom_cb from pr_<level>
Convert embedded function names in logging messages to %s, __func__

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/winbond-840.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:28 +0000 (20:59 +0000)]
tulip/winbond-840.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Convert %d.%d.%d.%d to %pI4

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/uli526x.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:27 +0000 (20:59 +0000)]
tulip/uli526x.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove DRV_NAME from logging messages
Add do {} while(0) to ULI526X_DBUG macro
Make SHOW_MEDIA_TYPE macro more readable

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/timer.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:26 +0000 (20:59 +0000)]
tulip/timer.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/pnic2.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:25 +0000 (20:59 +0000)]
tulip/pnic2.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/pnic.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:24 +0000 (20:59 +0000)]
tulip/pnic.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/media.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:23 +0000 (20:59 +0000)]
tulip/media.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/interrupt.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:22 +0000 (20:59 +0000)]
tulip/interrupt.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/eeprom.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:21 +0000 (20:59 +0000)]
tulip/eeprom.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/dmfe.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:20 +0000 (20:59 +0000)]
tulip/dmfe.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove 'DRV_NAME ": ' from logging messages
Convert commented out printks to pr_debug

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/de2104x.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:19 +0000 (20:59 +0000)]
tulip/de2104x.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip/21142.c: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:18 +0000 (20:59 +0000)]
tulip/21142.c: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where a dev is available
Convert printks to pr_<level> where not
Coalesce format strings
Change print formats with %d.dx to %0dx

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agotulip_core: Use dev_<level> and pr_<level>
Joe Perches [Thu, 28 Jan 2010 20:59:17 +0000 (20:59 +0000)]
tulip_core: Use dev_<level> and pr_<level>

Convert printks to dev_<level> where appropriate
Convert printks to pr_<level>
Change print formats with %d.dx to %0dx
Coalesce long formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoBluetooth: Use the control channel for raw HID reports
Bastien Nocera [Wed, 20 Jan 2010 12:00:42 +0000 (12:00 +0000)]
Bluetooth: Use the control channel for raw HID reports

In commit 2da31939a42f7a676a0bc5155d6a0a39ed8451f2, support
for Bluetooth hid_output_raw_report was added, but it pushes
the data to the interrupt channel instead of the contol one.

This patch makes hid_output_raw_report use the control channel
instead. Using the interrupt channel was a mistake.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
14 years agoBluetooth: Add DFU driver for Atheros Bluetooth chipset AR3011
Vikram Kandukuri [Wed, 6 Jan 2010 13:34:15 +0000 (19:04 +0530)]
Bluetooth: Add DFU driver for Atheros Bluetooth chipset AR3011

Signed-off-by: Vikram Kandukuri <vikram.kandukuri@atheros.com>
Signed-off-by: Alicke Xu <sxu@atheros.com>
Reviewed-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
14 years agoBluetooth: Redo checks in IRQ handler for shared IRQ support
Mike Frysinger [Mon, 14 Sep 2009 17:43:49 +0000 (13:43 -0400)]
Bluetooth: Redo checks in IRQ handler for shared IRQ support

Commit ac019360fe3 changed the irq handler logic to BUG_ON rather than
returning IRQ_NONE when the incoming argument is invalid.  While this
works in most cases, it doesn't work when the IRQ is shared with other
devices (or when DEBUG_SHIRQ is enabled).

So revert the previous change and replace the warning message with a
comment explaining that we want this behavior.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
14 years agoBluetooth: Fix memory leak in L2CAP
Andrei Emeltchenko [Wed, 23 Dec 2009 11:07:14 +0000 (13:07 +0200)]
Bluetooth: Fix memory leak in L2CAP

Move skb_clone after error confition check so it is not going
potentially out of the scope.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
14 years agoBluetooth: Remove double free of SKB pointer in L2CAP
Andrei Emeltchenko [Tue, 22 Dec 2009 13:58:08 +0000 (15:58 +0200)]
Bluetooth: Remove double free of SKB pointer in L2CAP

Trivial fix for double free of SKB pointer with kfree_skb to
make code simplier and cleaner. Remove unused variable err.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
14 years agocdc_ether: Partially revert "usbnet: Set link down initially ..."
Ben Hutchings [Fri, 29 Jan 2010 05:37:18 +0000 (21:37 -0800)]
cdc_ether: Partially revert "usbnet: Set link down initially ..."

Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down
initially for drivers that update link state") changed the initial link
state in cdc_ether and other drivers based on the understanding that the
devices they support generate link change interrupts.  However, this is
optional in the CDC Ethernet protocol, and two users have reported in
<http://bugzilla.kernel.org/show_bug.cgi?id=14791> that the link state
for their devices remains down.  Therefore, revert the change in
cdc_ether.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Avi Rozen <avi.rozen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobe2net: Fix memset() arg ordering.
David S. Miller [Fri, 29 Jan 2010 05:36:21 +0000 (21:36 -0800)]
be2net: Fix memset() arg ordering.

Noticed by Ben Hutchings.

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agosched: add head drop fifo queue
Hagen Paul Pfeifer [Sun, 24 Jan 2010 12:30:59 +0000 (12:30 +0000)]
sched: add head drop fifo queue

This adds an additional queuing strategy, called pfifo_head_drop,
to remove the oldest skb in the case of an overflow within the queue -
the head element - instead of the last skb (tail). To remove the oldest
skb in congested situations is useful for sensor network environments
where newer packets reflect the superior information.

Reviewed-by: Florian Westphal <fw@strlen.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonetns xfrm: ipcomp6 support
Alexey Dobriyan [Mon, 25 Jan 2010 10:39:09 +0000 (10:39 +0000)]
netns xfrm: ipcomp6 support

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonetns xfrm: ipcomp support
Alexey Dobriyan [Mon, 25 Jan 2010 10:38:34 +0000 (10:38 +0000)]
netns xfrm: ipcomp support

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonetns xfrm: xfrm6_tunnel in netns
Alexey Dobriyan [Mon, 25 Jan 2010 10:37:54 +0000 (10:37 +0000)]
netns xfrm: xfrm6_tunnel in netns

I'm not sure about rcu stuff near kmem cache destruction:
* checks for non-empty hashes look bogus, they're done _before_
  rcu_berrier()
* unregistering netns ops is done before kmem_cache destoy
  (as it should), and unregistering involves rcu barriers by itself

So it looks nothing should be done.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonetns xfrm: fixup xfrm6_tunnel error propagation
Alexey Dobriyan [Mon, 25 Jan 2010 10:28:21 +0000 (10:28 +0000)]
netns xfrm: fixup xfrm6_tunnel error propagation

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet: merge fixup for qlge_main
Stephen Rothwell [Thu, 28 Jan 2010 14:13:13 +0000 (06:13 -0800)]
net: merge fixup for qlge_main

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Thu, 28 Jan 2010 14:12:38 +0000 (06:12 -0800)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

14 years agonetdev: remove HAVE_ leftovers
Alexey Dobriyan [Wed, 27 Jan 2010 10:17:41 +0000 (10:17 +0000)]
netdev: remove HAVE_ leftovers

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobonding: bond_open error return value
stephen hemminger [Mon, 25 Jan 2010 23:34:15 +0000 (23:34 +0000)]
bonding: bond_open error return value

The convention for API functions in kernel is to return errno value;
bond_open would return -1 if alb setup failed. The only reason that
could happen is if kmalloc() failed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early
John Fastabend [Wed, 27 Jan 2010 16:38:06 +0000 (16:38 +0000)]
ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early

Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that
we can learn if this is going to fail as early as possible.  Previously,
ixgbe_down or ixgbe_close were being called before this check and the
IXGBE_RESETTING bit was being set and cleared.  Worse if this failed
the corresponding ixgbe_up/ndo_open would not called.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoixgbe: set the correct DCB bit for pg tx settings
John Fastabend [Wed, 27 Jan 2010 16:37:44 +0000 (16:37 +0000)]
ixgbe: set the correct DCB bit for pg tx settings

Set the correct bit BIT_PG_TX when tx PG settings are set.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoigbvf: fix issue w/ mapped_as_page being left set after unmap
Alexander Duyck [Wed, 27 Jan 2010 15:30:39 +0000 (15:30 +0000)]
igbvf: fix issue w/ mapped_as_page being left set after unmap

This change fixes an issue in igbvf with mapped_as_page being left set
after a page is unmapped which results in buffers which are mapped via map
single being unmapped as page.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agodrivers/net: ks8851_mll ethernet network driver
Choi, David [Wed, 27 Jan 2010 06:03:16 +0000 (06:03 +0000)]
drivers/net: ks8851_mll ethernet network driver

Hello David Miller,

I fix a bug in ks8851_mll driver, which has existed since 2.6.32-rc6.

>From : David J. Choi <david.choi@micrel.com>

Fix a bug that the data pointers in the interrupt handler are set wrong, which is related with the 5th parameter of request_irq().

Signed-off-by : David J. Choi <david.choi@micrel.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agobe2net: Bug fix to support newer generation of BE ASIC
Ajit Khaparde [Wed, 27 Jan 2010 21:56:44 +0000 (21:56 +0000)]
be2net: Bug fix to support newer generation of BE ASIC

Bug fix in be2net for newer generation of BladeEngine ASIC.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Thu, 28 Jan 2010 13:42:33 +0000 (05:42 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

14 years agonet/atm: Cleanup dprint/ddprintk #defines and uses
Joe Perches [Tue, 26 Jan 2010 11:40:20 +0000 (11:40 +0000)]
net/atm: Cleanup dprint/ddprintk #defines and uses

Move "mpoa:%s: ", __func__/__FILE__ to #defines
Remove mpoa __func__/__FILE__ from dprintk uses
Add and use #define dprint_cont where appropriate

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/atm/lec.c: Add __lec_arp_check_expire and other cleanups
Joe Perches [Tue, 26 Jan 2010 11:40:19 +0000 (11:40 +0000)]
net/atm/lec.c: Add __lec_arp_check_expire and other cleanups

Reduce indentation in lec_arp_check_expire
Indent a case label
Remove != NULL logical tests from while ((skb = foo())) assign and tests

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/atm/svc.c: checkpatch cleanups
Joe Perches [Tue, 26 Jan 2010 11:40:18 +0000 (11:40 +0000)]
net/atm/svc.c: checkpatch cleanups

Convert #include <asm... to #include <linux...
Spacing cleanups
Mostly 80 column wrapped
Move trailing statements to new lines
switch/case cleanups

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/atm/signaling.c: checkpatch cleanups
Joe Perches [Tue, 26 Jan 2010 11:40:17 +0000 (11:40 +0000)]
net/atm/signaling.c: checkpatch cleanups

Mostly 80 column wrapped.
Move embedded assigns out of tests
Move trailing statements to new lines
switch/case cleanups

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/atm/resources.c: checkpatch cleanups
Joe Perches [Tue, 26 Jan 2010 11:40:16 +0000 (11:40 +0000)]
net/atm/resources.c: checkpatch cleanups

Spacing cleanups
Mostly 80 column wrapped.
Move embedded assigns out of tests
Move trailing statements to new lines
switch/case cleanups

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agonet/atm/raw.c: checkpatch cleanups
Joe Perches [Tue, 26 Jan 2010 11:40:15 +0000 (11:40 +0000)]
net/atm/raw.c: checkpatch cleanups

Spacing cleanups
Mostly 80 column wrapped.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>