GitHub/MotorolaMobilityLLC/kernel-slsi.git
18 years ago[PATCH] IPMI: tidy up various things
Corey Minyard [Fri, 31 Mar 2006 10:30:40 +0000 (02:30 -0800)]
[PATCH] IPMI: tidy up various things

Tidy up various coding standard things, mostly removing the space after !,
but also break some long lines and fix a few other spacing inconsistencies.
Also fixes some bad error reporting when deleting an IPMI user.

Signed-off-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] IPMI: fix startup race condition
Corey Minyard [Fri, 31 Mar 2006 10:30:39 +0000 (02:30 -0800)]
[PATCH] IPMI: fix startup race condition

Matt Domsch noticed a startup race with the IPMI kernel thread, it was
possible (though extraordinarly unlikely) that a message could come in
before the upper layer was ready to handle it.  This patch splits the
startup processing of an IPMI interface into two parts, one to get ready
and one to actually start the processes to receive messages from the
interface.

[akpm@osdl.org: cleanups]
Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] make tty_insert_flip_string a non-GPL export
Andrew Morton [Fri, 31 Mar 2006 10:30:35 +0000 (02:30 -0800)]
[PATCH] make tty_insert_flip_string a non-GPL export

Alan sayeth "Based on Linus original comments about _GPL we should export
tty_insert_flip_char as EXPORT_SYMBOL because it used to be EXPORT_SYMBOL
equivalent (trivial inline).  The other features are new extensions are were
not available to drivers before so need not be provided except as _GPL
functionality as far as I can see."

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=6294

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Philippe Vouters <Philippe.Vouters@laposte.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] edac_752x needs CONFIG_HOTPLUG
Randy Dunlap [Fri, 31 Mar 2006 10:30:34 +0000 (02:30 -0800)]
[PATCH] edac_752x needs CONFIG_HOTPLUG

EDAC_752X uses pci_scan_single_device(), which is only available if
CONFIG_HOTPLUG is enabled, so limit this driver with HOTPLUG.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Dave Peterson <dsp@llnl.gov>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Don't pass boot parameters to argv_init[]
OGAWA Hirofumi [Fri, 31 Mar 2006 10:30:33 +0000 (02:30 -0800)]
[PATCH] Don't pass boot parameters to argv_init[]

The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).

And __setup() is used in obsolete_checksetup().

start_kernel()
-> parse_args()
-> unknown_bootoption()
-> obsolete_checksetup()

If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.

If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func().  If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].

Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.

This patch fixes a wrong usage of it, however fixes obvious one only.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Simplify proc/devices and fix early termination regression
Joe Korty [Fri, 31 Mar 2006 10:30:32 +0000 (02:30 -0800)]
[PATCH] Simplify proc/devices and fix early termination regression

Make baby-simple the code for /proc/devices.  Based on the proven design
for /proc/interrupts.

This also fixes the early-termination regression 2.6.16 introduced, as
demonstrated by:

    # dd if=/proc/devices bs=1
    Character devices:
      1 mem
    27+0 records in
    27+0 records out

This should also work (but is untested) when /proc/devices >4096 bytes,
which I believe is what the original 2.6.16 rewrite fixed.

[akpm@osdl.org: cleanups, simplifications]
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] __mod_timer: simplify ->base changing
Oleg Nesterov [Fri, 31 Mar 2006 10:30:31 +0000 (02:30 -0800)]
[PATCH] __mod_timer: simplify ->base changing

Since base and new_base are of the same type now, we can save one 'if'
branch and simplify the code a bit.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] kill __init_timer_base in favor of boot_tvec_bases
Oleg Nesterov [Fri, 31 Mar 2006 10:30:30 +0000 (02:30 -0800)]
[PATCH] kill __init_timer_base in favor of boot_tvec_bases

Commit a4a6198b80cf82eb8160603c98da218d1bd5e104:
[PATCH] tvec_bases too large for per-cpu data

introduced "struct tvec_t_base_s boot_tvec_bases" which is visible at
compile time.  This means we can kill __init_timer_base and move
timer_base_s's content into tvec_t_base_s.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] locks: don't panic
Miklos Szeredi [Fri, 31 Mar 2006 10:30:29 +0000 (02:30 -0800)]
[PATCH] locks: don't panic

Don't panic!  Just BUG_ON().

Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Mark unwind info for signal trampolines in vDSOs
Jakub Jelinek [Fri, 31 Mar 2006 10:30:28 +0000 (02:30 -0800)]
[PATCH] Mark unwind info for signal trampolines in vDSOs

Mark unwind info for signal trampolines using the new S augmentation flag
introduced in: http://gcc.gnu.org/PR26208.

GCC 4.2 (or patched earlier GCC) will be able to special case unwinding
through frames right above signal trampolines.  As the augmentations start
with z flag and S is at the very end of the augmentation string, older GCCs
will just skip the S flag as unknown (that's why an augmentation flag was
chosen over say a new CFA opcode).

Signed-off-by: Jakub Jelinek <jakub@redhat.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] for_each_possible_cpu: s390
KAMEZAWA Hiroyuki [Fri, 31 Mar 2006 10:30:26 +0000 (02:30 -0800)]
[PATCH] for_each_possible_cpu: s390

for_each_cpu() actually iterates across all possible CPUs.  We've had mistakes
in the past where people were using for_each_cpu() where they should have been
iterating across only online or present CPUs.  This is inefficient and
possibly buggy.

We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the
future.

This patch replaces for_each_cpu with for_each_possible_cpu.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: check for differences in host support
Paolo 'Blaisorblade' Giarrusso [Fri, 31 Mar 2006 10:30:25 +0000 (02:30 -0800)]
[PATCH] uml: check for differences in host support

If running on a host not supporting TLS (for instance 2.4) we should report
that cleanly to the user, instead of printing not comprehensible "error 5" for
that.

Additionally, i386 and x86_64 support different ranges for
user_desc->entry_number, and we must account for that; we couldn't pass
ourselves -1 because we need to override previously existing TLS descriptors
which glibc has possibly set, so test at startup the range to use.

x86 and x86_64 existing ranges are hardcoded.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: add arch_switch_to for newly forked thread
Paolo 'Blaisorblade' Giarrusso [Fri, 31 Mar 2006 10:30:24 +0000 (02:30 -0800)]
[PATCH] uml: add arch_switch_to for newly forked thread

Newly forked threads have no arch_switch_to_skas() called before their first
run, because when schedule() switches to them they're resumed in the body of
thread_wait() inside fork_handler() rather than in switch_threads() in
switch_to_skas().  Compensate this missing call.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: tls support: hack to make it compile on any host
Paolo 'Blaisorblade' Giarrusso [Fri, 31 Mar 2006 10:30:23 +0000 (02:30 -0800)]
[PATCH] uml: tls support: hack to make it compile on any host

Copy the definition of struct user_desc (with another name) for use by
userspace sources (where we use the host headers, and we can't be sure about
their content) to make sure UML compiles.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: implement {get,set}_thread_area for i386
Paolo 'Blaisorblade' Giarrusso [Fri, 31 Mar 2006 10:30:22 +0000 (02:30 -0800)]
[PATCH] uml: implement {get,set}_thread_area for i386

Implement sys_[gs]et_thread_area and the corresponding ptrace operations for
UML.  This is the main chunk, additional parts follow.  This implementation is
now well tested and has run reliably for some time, and we've understood all
the previously existing problems.

Their implementation saves the new GDT content and then forwards the call to
the host when appropriate, i.e.  immediately when the target process is
running or on context switch otherwise (i.e.  on fork and on ptrace() calls).

In SKAS mode, we must switch registers on each context switch (because SKAS
does not switches tls_array together with current->mm).

Also, added get_cpu() locking; this has been done for SKAS mode, since TT does
not need it (it does not use smp_processor_id()).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: clean arch_switch usage
Paolo 'Blaisorblade' Giarrusso [Fri, 31 Mar 2006 10:30:21 +0000 (02:30 -0800)]
[PATCH] uml: clean arch_switch usage

Call arch_switch also in switch_to_skas, even if it's, for now, a no-op for
that case (and mark this in the comment); this will change soon.

Also, arch_switch for TT mode is actually useless when the PT proxy (a
complicate debugging instrumentation for TT mode) is not enabled.  In fact, it
only calls update_debugregs, which checks debugregs_seq against seq (to check
if the registers are up-to-date - seq here means a "version number" of the
registers).

If the ptrace proxy is not enabled, debugregs_seq always stays 0 and
update_debugregs will be a no-op.  So, optimize this out (the compiler can't
do it).

Also, I've been disappointed by the fact that it would make a lot of sense if,
after calling a successful
update_debugregs(current->thread.arch.debugregs_seq),
current->thread.arch.debugregs_seq were updated with the new debugregs_seq.
But this is not done.  Is this a bug or a feature?  For all purposes, it seems
a bug (otherwise the whole mechanism does not make sense, which is also a
possibility to check), which causes some performance only problems (not
correctness), since we write_debugregs when not needed.

Also, as suggested by Jeff, remove a redundant enabling of SIGVTALRM,
comprised in the subsequent local_irq_enable().  I'm just a bit dubious if
ordering matters there...

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: split ldt.h in arch-independent and arch-dependant code
Paolo 'Blaisorblade' Giarrusso [Fri, 31 Mar 2006 10:30:19 +0000 (02:30 -0800)]
[PATCH] uml: split ldt.h in arch-independent and arch-dependant code

ldt-{i386,x86_64}.h is made of two different parts - some code for parsing of
LDT descriptors, which is arch-dependant, and the code to handle uml_ldt_t (an
LDT block inside UML), which is mostly arch-independant (among x86 and x86_64,
at least).

Join the common part in a single file (ldt.h) and split the rest away
(host_ldt-{i386,x86_64}.h).

This is needed because processor.h, with next patches, will start including
the LDT descriptor parsing macros in host_ldt.h, but it can't include ldt.h
because it uses semaphores (and to define semaphores one must first include
processor.h!).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: idle thread needn't take access to init_mm
Paolo 'Blaisorblade' Giarrusso [Fri, 31 Mar 2006 10:30:18 +0000 (02:30 -0800)]
[PATCH] uml: idle thread needn't take access to init_mm

Comparing this code which is the actual body of the arch-independent
cpu_idle(), it is clear that it's unnecessary to set ->mm and ->active_mm;
beyond that, a kernel thread is not supposed to have ->mm != NULL, only
active_mm.

This showed up because I used the assumption (which is IMHO valid) that kernel
thread have their ->mm == NULL, and it failed for this thread.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: fix min usage
Al Viro [Fri, 31 Mar 2006 10:30:17 +0000 (02:30 -0800)]
[PATCH] uml: fix min usage

type-safe min() in arch/um/drivers/mconsole_kern.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: remove unused make variables
Al Viro [Fri, 31 Mar 2006 10:30:16 +0000 (02:30 -0800)]
[PATCH] uml: remove unused make variables

Removed assignments to unused variables in arch/um/os-Linux/Makefile

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: __user annotations
Al Viro [Fri, 31 Mar 2006 10:30:16 +0000 (02:30 -0800)]
[PATCH] uml: __user annotations

__user annotations (hppfs)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: sparse cleanups
Al Viro [Fri, 31 Mar 2006 10:30:15 +0000 (02:30 -0800)]
[PATCH] uml: sparse cleanups

misc sparse annotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: kconfigs
Al Viro [Fri, 31 Mar 2006 10:30:14 +0000 (02:30 -0800)]
[PATCH] uml: kconfigs

kconfig sanitized around drivers/net

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: eliminate duplicate mrpropered files
Al Viro [Fri, 31 Mar 2006 10:30:13 +0000 (02:30 -0800)]
[PATCH] uml: eliminate duplicate mrpropered files

no need to add the same file twice to MRPROPER_FILES

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: clean up remapping code build magic
Al Viro [Fri, 31 Mar 2006 10:30:12 +0000 (02:30 -0800)]
[PATCH] uml: clean up remapping code build magic

kills unmap magic

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: eliminate symlinks to host arch
Al Viro [Fri, 31 Mar 2006 10:30:11 +0000 (02:30 -0800)]
[PATCH] uml: eliminate symlinks to host arch

kills symlinks in arch/um/sys-*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: fix initcall return values
Jeff Dike [Fri, 31 Mar 2006 10:30:10 +0000 (02:30 -0800)]
[PATCH] uml: fix initcall return values

A number of UML initcalls were improperly returning 1.  Also removed any
nearby emacs formatting comments.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] uml: redeclare highmem
Jeff Dike [Fri, 31 Mar 2006 10:30:09 +0000 (02:30 -0800)]
[PATCH] uml: redeclare highmem

The earlier printf patch missed a corresponding change in the printed
variable.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] UML: Hotplug memory, take 2
Jeff Dike [Fri, 31 Mar 2006 10:30:08 +0000 (02:30 -0800)]
[PATCH] UML: Hotplug memory, take 2

Changes since first version
added check for MADV_REMOVE support on the host
fixed error return botch
shrunk sprintf array by one character

This adds hotplug memory support to UML.  The mconsole syntax is
  config mem=[+-]n[KMG]
In other words, add or subtract some number of kilobytes, megabytes, or
gigabytes.

Unplugged pages are allocated and then madvise(MADV_TRUNCATE), which is a
currently experimental madvise extension.  These pages are tracked so they
can be plugged back in later if the admin decides to give them back.  The
first page to be unplugged is used to keep track of about 4M of other
pages.  A list_head is the first thing on this page.  The rest is filled
with addresses of other unplugged pages.  This first page is not madvised,
obviously.

When this page is filled, the next page is used in a similar way and linked
onto a list with the first page.  Etc.  This whole process reverses when
pages are plugged back in.  When a tracking page no longer tracks any
unplugged pages, then it is next in line for plugging, which is done by
freeing pages back to the kernel.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Fix suspend with traced tasks
Pavel Machek [Fri, 31 Mar 2006 10:30:06 +0000 (02:30 -0800)]
[PATCH] Fix suspend with traced tasks

strace /bin/bash misbehaves after resume; this fixes it.

(akpm: it's scary calling refrigerator() in state TASK_TRACED, but it seems to
do the right thing).

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] i386 kdump timer vector lockup fix
Vivek Goyal [Fri, 31 Mar 2006 10:30:05 +0000 (02:30 -0800)]
[PATCH] i386 kdump timer vector lockup fix

Porting the patch I posted for x86_64 to i386.

http://marc.theaimsgroup.com/?l=linux-kernel&m=114178139610707&w=2

o While using kdump, after a system crash when second kernel boots, timer
  vector gets (0x31) locked and CPU does not see timer interrupts
  travelling from IOAPIC to APIC.  Currently it does not lead to boot
  failure in second kernel as timer interrupts continues to come as ExtInt
  through LAPIC directly, but fixing it is good in case some boards do not
  support the other mode.

o After a system crash, it is not safe to service interrupts any more,
  hence interrupts are disabled.  This leads to pending interrupts at
  LAPIC.  LAPIC sends these interrupts to the CPU during early boot of
  second kernel.  Other pending interrupts are discarded saying unexpected
  trap but timer interrupt is serviced and CPU does not issue an LAPIC EOI
  because it think this interrupt came from i8259 and sends ack to 8259.
  This leads to vector 0x31 locking as LAPIC does not clear respective ISR
  and keeps on waiting for EOI.

o This patch issues extra EOI for the pending interrupts who have ISR set.

o Though today only timer seems to be the special case because in early
  boot it thinks interrupts are coming from i8259 and uses
  mask_and_ack_8259A() as ack handler and does not issue LAPIC EOI.  But
  probably doing it in generic manner for all vectors makes sense.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Remove long dead i386 floppy asm code
Brian Gerst [Fri, 31 Mar 2006 10:30:04 +0000 (02:30 -0800)]
[PATCH] Remove long dead i386 floppy asm code

It's been disabled since v2.1.88

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] for_each_possible_cpu: sh
KAMEZAWA Hiroyuki [Fri, 31 Mar 2006 10:30:02 +0000 (02:30 -0800)]
[PATCH] for_each_possible_cpu: sh

for_each_cpu() actually iterates across all possible CPUs.  We've had mistakes
in the past where people were using for_each_cpu() where they should have been
iterating across only online or present CPUs.  This is inefficient and
possibly buggy.

We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the
future.

This patch replaces for_each_cpu with for_each_possible_cpu.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] hugetlb: don't allow free hugetlb count fall below reserved count
Chen, Kenneth W [Fri, 31 Mar 2006 10:30:01 +0000 (02:30 -0800)]
[PATCH] hugetlb: don't allow free hugetlb count fall below reserved count

With strict page reservation, I think kernel should enforce number of free
hugetlb page don't fall below reserved count.  Currently it is possible in
the sysctl path.  Add proper check in sysctl to disallow that.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] fix extra page ref count in follow_hugetlb_page
Chen, Kenneth W [Fri, 31 Mar 2006 10:29:57 +0000 (02:29 -0800)]
[PATCH] fix extra page ref count in follow_hugetlb_page

git-commit: d5d4b0aa4e1430d73050babba999365593bdb9d2
"[PATCH] optimize follow_hugetlb_page" breaks mlock on hugepage areas.

I mis-interpret pages argument and made get_page() unconditional.  It
should only get a ref count when "pages" argument is non-null.

Credit goes to Adam Litke who spotted the bug.

Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] mm: schedule find_trylock_page() removal
Nick Piggin [Fri, 31 Mar 2006 10:29:56 +0000 (02:29 -0800)]
[PATCH] mm: schedule find_trylock_page() removal

find_trylock_page() is an odd interface in that it doesn't take a reference
like the others.  Now that XFS no longer uses it, and its last remaining
caller actually wants an elevated refcount, opencode that callsite and
schedule find_trylock_page() for removal.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] migrate_pages_to() must be defined for the no swap case
Christoph Lameter [Fri, 31 Mar 2006 10:29:56 +0000 (02:29 -0800)]
[PATCH] migrate_pages_to() must be defined for the no swap case

Fix migrate_pages_to() definition.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] drivers/mtd/maps/vmax301.c: fix off by one vmax_mtd
Petri T. Koistinen [Fri, 31 Mar 2006 10:29:54 +0000 (02:29 -0800)]
[PATCH] drivers/mtd/maps/vmax301.c: fix off by one vmax_mtd

Fix an obvious off-by-one error (vmax_mtd[] contains two elements).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] mtd: fix broken name_to_dev_t() declaration
Herbert Poetzl [Fri, 31 Mar 2006 10:29:53 +0000 (02:29 -0800)]
[PATCH] mtd: fix broken name_to_dev_t() declaration

drivers/mtd/devices/blkmtd.c uses a local declaration of name_to_dev_t()
which is inconsistant with the real one.  the following patch fixes this by
removing the local declaration and including mount.h instead

this patch was originally done by Micah Anderson.

Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Acked-by: Micah Anderson <micah@riseup.net>
Acked-by: Daniel Hokka Zakrisson <daniel@hozac.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] mtd/redboot: Handle holes in fis table
Peter Korsgaard [Fri, 31 Mar 2006 10:29:52 +0000 (02:29 -0800)]
[PATCH] mtd/redboot: Handle holes in fis table

Redboot simply sets the first character of a fis entry to 0xff on "fis
delete".  The kernel redboot parser stops parsing on such an entry, and
without this patch any entries after a deleted image would not be detected.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Add chip used in collie to jedec_probe
Pavel Machek [Fri, 31 Mar 2006 10:29:51 +0000 (02:29 -0800)]
[PATCH] Add chip used in collie to jedec_probe

This adds flash chip used in Sharp Zaurus sl5500 (collie) to jedec_probe.
Values work for read-only access, but I have not figured out how to do
read-write.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Dead code in mtd/maps/pci.c
Eric Sesterhenn [Fri, 31 Mar 2006 10:29:50 +0000 (02:29 -0800)]
[PATCH] Dead code in mtd/maps/pci.c

This fixes coverity bug #12.  The first two gotos in the function still
have the initial value for mtd set.  And the third goto just triggers for
!mtd

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Kill ifdefs in mtdcore.c
Pavel Machek [Fri, 31 Mar 2006 10:29:49 +0000 (02:29 -0800)]
[PATCH] Kill ifdefs in mtdcore.c

Kill unneccessary ifdefs in mtdcore.c.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Fix debug statement in inftlcore.c
Eric Sesterhenn / snakebyte [Fri, 31 Mar 2006 10:29:47 +0000 (02:29 -0800)]
[PATCH] Fix debug statement in inftlcore.c

Fix a copy\a/paste bug found by cpminer inside the inftlcore.c file

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] mtd cmdlinepart: allow zero offset value
Atsushi Nemoto [Fri, 31 Mar 2006 10:29:46 +0000 (02:29 -0800)]
[PATCH] mtd cmdlinepart: allow zero offset value

Current cmdlinepart.c uses offset value 0 to specify a continuous
partition.  This prevents creating a second partition starting at 0.

For example, I can split 4MB device using "mtdparts=id:2M,2M", but I can
not do "mtdparts=id:2M@2M,2M@0" to swap mtd0 and mtd1.

This patch introduces special OFFSET_CONTINUOUS value for a continuous
partition and allows 0 for offset value.

Also this patch replaces 0xffffffff with UINT_MAX for SIZE_REMAINING.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] drivers/mtd: Use ARRAY_SIZE macro
Tobias Klauser [Fri, 31 Mar 2006 10:29:45 +0000 (02:29 -0800)]
[PATCH] drivers/mtd: Use ARRAY_SIZE macro

Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove
duplicates of the macro.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] MTD_NAND_SHARPSL and MTD_NAND_NANDSIM should be tristate's
Adrian Bunk [Fri, 31 Mar 2006 10:29:43 +0000 (02:29 -0800)]
[PATCH] MTD_NAND_SHARPSL and MTD_NAND_NANDSIM should be tristate's

MTD_NAND=m and MTD_NAND_SHARPSL=y or MTD_NAND_NANDSIM=y are illegal
combinations that mustn't be allowed.

This patch fixes this bug by making MTD_NAND_SHARPSL and MTD_NAND_NANDSIM
tristate's.

Additionally, it fixes some whitespace damage at these options.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: "Artem B. Bityutskiy" <dedekind@yandex.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] drivers/mtd/: small cleanups
Adrian Bunk [Fri, 31 Mar 2006 10:29:42 +0000 (02:29 -0800)]
[PATCH] drivers/mtd/: small cleanups

- chips/sharp.c: make two needlessly global functions static

- move some declarations to a header file where they belong to

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sem2mutex: drivers/mtd/
Ingo Molnar [Fri, 31 Mar 2006 10:29:41 +0000 (02:29 -0800)]
[PATCH] sem2mutex: drivers/mtd/

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] sem2mutex: mtd/doc2000.c
Ingo Molnar [Fri, 31 Mar 2006 10:29:40 +0000 (02:29 -0800)]
[PATCH] sem2mutex: mtd/doc2000.c

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] m25p80: printk warning fix
Andrew Morton [Fri, 31 Mar 2006 10:29:39 +0000 (02:29 -0800)]
[PATCH] m25p80: printk warning fix

drivers/mtd/devices/m25p80.c: In function `m25p80_erase':
drivers/mtd/devices/m25p80.c:189: warning: signed size_t format, different type arg (arg 6)

Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] splice exports
Jeff Garzik [Fri, 31 Mar 2006 04:06:13 +0000 (23:06 -0500)]
[PATCH] splice exports

Woe be unto he who builds their filesystems as modules.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
[ Obscure quote from the infamous geek bible? ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6
Linus Torvalds [Thu, 30 Mar 2006 23:04:13 +0000 (15:04 -0800)]
Merge git://git./linux/kernel/git/kyle/parisc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (24 commits)
  [PARISC] Fix double free when removing HIL drivers
  [PARISC] Add atomic_sub_and_test
  [PARISC] Enabled some NLS modules in a500, b180 and c3000 defconfigs
  [PARISC] Kill duplicated EXPORT_SYMBOL warnings
  [PARISC] Move ioremap EXPORT_SYMBOL from parisc_ksyms.c
  [PARISC] Make local_t use atomic_long_t
  [PARISC] Update defconfigs
  [PARISC] Add PREEMPT support
  [PARISC] More useful readwrite lock helpers
  [PARISC] Convert HIL drivers to use input_allocate_device
  [PARISC] Fixup CONFIG_EISA a bit
  [PARISC] getsockopt should be ENTRY_COMP
  [PARISC] Remove obsolete CONFIG_DEBUG_IOREMAP
  [PARISC] Temporary FIXME for ioremapping EISA regions
  [PARISC] Enable ioremap functionality unconditionally
  [PARISC] Fix stifb with IOREMAP and a 64-bit kernel
  [PARISC] Add CONFIG_HPPA_IOREMAP to conditionally enable ioremap
  [PARISC] Add STRICT_MM_TYPECHECKS
  [PARISC] Fix IOREMAP with a 64-bit kernel
  [PARISC] Add parisc implementation of flush_kernel_dcache_page()
  ...

18 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Thu, 30 Mar 2006 22:32:38 +0000 (14:32 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mad: RMPP support for additional classes
  IB/mad: include GID/class when matching receives
  IB/mthca: Fix section mismatch problems
  IPoIB: Fix oops with raw sockets
  IB/mthca: Fix check of size in SRQ creation
  IB/srp: Fix unmapping of fake scatterlist

18 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Thu, 30 Mar 2006 22:29:20 +0000 (14:29 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] sata_mv: three bug fixes
  [PATCH] libata: ata_dev_init_params() fixes
  [PATCH] libata: Fix interesting use of "extern" and also some bracketing
  [PATCH] libata: Simplex and other mode filtering logic
  [PATCH] libata - ATA is both ATA and CFA
  [PATCH] libata: Add ->set_mode hook for odd drivers
  [PATCH] libata: BMDMA handling updates
  [PATCH] libata: kill trailing whitespace
  [PATCH] libata: add FIXME above ata_dev_xfermask()
  [PATCH] libata: cosmetic changes in ata_bus_softreset()
  [PATCH] libata: kill E.D.D.

18 years agoMerge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 30 Mar 2006 22:26:27 +0000 (14:26 -0800)]
Merge branch 'drm-patches' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: remove drm_{alloc,free}_pages
  drm: sis fix compile warning
  drm: add new radeon PCI ids..
  drm: read breadcrumb in IRQ handler
  drm: fixup i915 breadcrumb read/write
  drm:  remove pointless checks in radeon_state
  drm: fixup improper cast.
  drm: rationalise some pci ids
  drm: Add general-purpose packet for manipulating scratch registers (r300)
  drm: rework radeon memory map (radeon 1.23)
  drm: update r300 register names
  drm: fixup PCI DMA support

18 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Thu, 30 Mar 2006 20:38:18 +0000 (12:38 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] ioremap() should prefer WB over UC
  [IA64] Add __mca_table to the DISCARD list in gate.lds
  [IA64] Move __mca_table out of the __init section
  [IA64] simplify some condition checks in iosapic_check_gsi_range
  [IA64] correct some messages and fixes some minor things
  [IA64-SGI] fix for-loop in sn_hwperf_geoid_to_cnode()
  [IA64-SGI] sn_hwperf use of num_online_cpus()
  [IA64] optimize flush_tlb_range on large numa box
  [IA64] lazy_mmu_prot_update needs to be aware of huge pages

18 years ago[PATCH] splice: add support for SPLICE_F_MOVE flag
Jens Axboe [Thu, 30 Mar 2006 13:16:46 +0000 (15:16 +0200)]
[PATCH] splice: add support for SPLICE_F_MOVE flag

This enables the caller to migrate pages from one address space page
cache to another.  In buzz word marketing, you can do zero-copy file
copies!

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Introduce sys_splice() system call
Jens Axboe [Thu, 30 Mar 2006 13:15:30 +0000 (15:15 +0200)]
[PATCH] Introduce sys_splice() system call

This adds support for the sys_splice system call. Using a pipe as a
transport, it can connect to files or sockets (latter as output only).

From the splice.c comments:

   "splice": joining two ropes together by interweaving their strands.

   This is the "extended pipe" functionality, where a pipe is used as
   an arbitrary in-memory buffer. Think of a pipe as a small kernel
   buffer that you can use to transfer data from one end to the other.

   The traditional unix read/write is extended with a "splice()" operation
   that transfers data buffers to or from a pipe buffer.

   Named by Larry McVoy, original implementation from Linus, extended by
   Jens to support splicing to files and fixing the initial implementation
   bugs.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PARISC] Fix double free when removing HIL drivers
Kyle McMartin [Thu, 30 Mar 2006 16:47:32 +0000 (11:47 -0500)]
[PARISC] Fix double free when removing HIL drivers

On Thu, Mar 30, 2006 at 08:31:02AM -0500, Dmitry Torokhov wrote:
> Don't do that, its double free. input_unregister_device() normally
> causes release() to be called and free the device. input_free_device
> is only to be called when input_register_device has not been called or
> failed.
>
> Plus you might want to unregister device after closing serio port,
> otherwise your interrupt routine might be referencing already freed
> memory.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Add atomic_sub_and_test
Kyle McMartin [Thu, 30 Mar 2006 00:47:32 +0000 (19:47 -0500)]
[PARISC] Add atomic_sub_and_test

Define atomic_sub_and_test to fix build failures.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Enabled some NLS modules in a500, b180 and c3000 defconfigs
Stuart Brady [Wed, 29 Mar 2006 20:11:25 +0000 (13:11 -0700)]
[PARISC] Enabled some NLS modules in a500, b180 and c3000 defconfigs

With c3000_defconfig and b180_defconfig, FAT couldn't be used
because no NLS modules were built.

Signed-off-by: Stuart Brady <sdb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Kill duplicated EXPORT_SYMBOL warnings
Kyle McMartin [Wed, 29 Mar 2006 22:21:12 +0000 (15:21 -0700)]
[PARISC] Kill duplicated EXPORT_SYMBOL warnings

Some symbols are exported both in parisc_ksyms.c, and at their
definition site. Nuke the redundant EXPORT_SYMBOL in ksyms to quiet
warnings when vmlinux is linked.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Move ioremap EXPORT_SYMBOL from parisc_ksyms.c
Kyle McMartin [Wed, 29 Mar 2006 22:18:32 +0000 (15:18 -0700)]
[PARISC] Move ioremap EXPORT_SYMBOL from parisc_ksyms.c

Move ioremap/iounmap EXPORT_SYMBOL to ioremap.c where they belong.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Make local_t use atomic_long_t
Kyle McMartin [Wed, 29 Mar 2006 14:04:49 +0000 (07:04 -0700)]
[PARISC] Make local_t use atomic_long_t

As done in asm-generic/local.h in mainline. Otherwise local_t was 32-bit
even on a 64-bit kernel.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Update defconfigs
Helge Deller [Sun, 26 Mar 2006 18:19:46 +0000 (11:19 -0700)]
[PARISC] Update defconfigs

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Add PREEMPT support
Kyle McMartin [Sat, 25 Mar 2006 04:24:21 +0000 (21:24 -0700)]
[PARISC] Add PREEMPT support

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] More useful readwrite lock helpers
Kyle McMartin [Sat, 25 Mar 2006 04:22:02 +0000 (21:22 -0700)]
[PARISC] More useful readwrite lock helpers

spinlock.c needs _can_lock helpers. Rewrite _is_locked helpers to be
_can_lock helpers.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Convert HIL drivers to use input_allocate_device
Helge Deller [Sun, 26 Mar 2006 14:41:55 +0000 (07:41 -0700)]
[PARISC] Convert HIL drivers to use input_allocate_device

Convert HIL drivers to use input_allocate_device() - avoids crashes.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Fixup CONFIG_EISA a bit
Helge Deller [Sun, 26 Mar 2006 08:54:16 +0000 (01:54 -0700)]
[PARISC] Fixup CONFIG_EISA a bit

Fix up some ISA/EISA stuff.

(Note: isa_ accessors have been removed from asm/io.h)

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] getsockopt should be ENTRY_COMP
Kyle McMartin [Sun, 19 Feb 2006 18:02:50 +0000 (11:02 -0700)]
[PARISC] getsockopt should be ENTRY_COMP

compat_sys_getsockopt exists, so we should use that, instead of directly
using sys_getsockopt on 64-bit compiles.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Remove obsolete CONFIG_DEBUG_IOREMAP
Helge Deller [Thu, 23 Mar 2006 08:07:00 +0000 (01:07 -0700)]
[PARISC] Remove obsolete CONFIG_DEBUG_IOREMAP

Remove CONFIG_DEBUG_IOREMAP, it's now obsolete and won't work anyway.
Remove it from lib/KConfig since it was only available on parisc.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Temporary FIXME for ioremapping EISA regions
Helge Deller [Thu, 23 Mar 2006 07:40:10 +0000 (00:40 -0700)]
[PARISC] Temporary FIXME for ioremapping EISA regions

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Enable ioremap functionality unconditionally
Helge Deller [Thu, 23 Mar 2006 07:32:46 +0000 (00:32 -0700)]
[PARISC] Enable ioremap functionality unconditionally

Enable CONFIG_HPPA_IOREMAP by default and remove all now unnecessary code.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Fix stifb with IOREMAP and a 64-bit kernel
Helge Deller [Wed, 22 Mar 2006 22:19:46 +0000 (15:19 -0700)]
[PARISC] Fix stifb with IOREMAP and a 64-bit kernel

Kill various warnings when built using ioremap.
Remove stifb_{read,write} functions, which are now obsolete (and stack abusers!)
Disable stifb mmap() functionality on a 64-bit kernel, it will crash the
machine.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Add CONFIG_HPPA_IOREMAP to conditionally enable ioremap
Helge Deller [Tue, 7 Mar 2006 21:12:13 +0000 (14:12 -0700)]
[PARISC] Add CONFIG_HPPA_IOREMAP to conditionally enable ioremap

Instead of making it a #define in asm/io.h, allow user to select
to turn on IOREMAP from the config menu.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Add STRICT_MM_TYPECHECKS
Helge Deller [Thu, 23 Mar 2006 22:48:15 +0000 (15:48 -0700)]
[PARISC] Add STRICT_MM_TYPECHECKS

Add STRICT_MM_TYPECHECKS to page.h as other architectures do.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Fix IOREMAP with a 64-bit kernel
Helge Deller [Tue, 21 Mar 2006 23:01:15 +0000 (16:01 -0700)]
[PARISC] Fix IOREMAP with a 64-bit kernel

We were only copying 32-bits of the PTE/PFN, not the full 52-bits.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Add parisc implementation of flush_kernel_dcache_page()
James Bottomley [Wed, 22 Mar 2006 16:42:04 +0000 (09:42 -0700)]
[PARISC] Add parisc implementation of flush_kernel_dcache_page()

We need to do a little renaming of our original syntax because
of the difference in arguments.

Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Add parisc implementation of flush_anon_page()
James Bottomley [Wed, 22 Mar 2006 15:28:59 +0000 (08:28 -0700)]
[PARISC] Add parisc implementation of flush_anon_page()

This should now allow SG_IO and fuse to function correctly on our
platform.

Signed-off-by: James Bottomley <jejb@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] I/O-Space must be ioremap_nocache()'d
Helge Deller [Mon, 27 Mar 2006 19:52:15 +0000 (12:52 -0700)]
[PARISC] I/O-Space must be ioremap_nocache()'d

Addresses in F-space must be accessed uncached on most parisc machines.

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Enable free_initrd_mem()
Helge Deller [Tue, 7 Mar 2006 20:34:45 +0000 (13:34 -0700)]
[PARISC] Enable free_initrd_mem()

I think it's time to enable free_initrd_mem() again...

Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[PARISC] Clarify pdc_stable license terms
Thibaut VARENE [Sat, 4 Feb 2006 01:06:30 +0000 (18:06 -0700)]
[PARISC] Clarify pdc_stable license terms

pdc_stable.c is explicitly licensed under GPL version 2.

Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
18 years ago[IA64] ioremap() should prefer WB over UC
Bjorn Helgaas [Thu, 30 Mar 2006 16:53:39 +0000 (09:53 -0700)]
[IA64] ioremap() should prefer WB over UC

efi_memmap_init() collects full granules of WB memory, without
regard for whether they also support UC.  So in order for ioremap()
to work for main memory, it must prefer WB mappings when possible.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
18 years ago[IA64] Add __mca_table to the DISCARD list in gate.lds
Jes Sorensen [Thu, 30 Mar 2006 15:13:22 +0000 (10:13 -0500)]
[IA64] Add __mca_table to the DISCARD list in gate.lds

Add __mca_table to the DISCARD list for the gate.lds linker script to
avoid broken linker references when linking the final vmlinux file.

Also add comment to include/asm-ia64/asmmacros.h to avoid anyone else
hitting this problem in the future.

Credits to James Bottomley <James.Bottomley@SteelEye.com> for spotting
the DISCARD list in gate.lds.S

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
18 years agoIB/mad: RMPP support for additional classes
Hal Rosenstock [Wed, 29 Mar 2006 00:40:04 +0000 (16:40 -0800)]
IB/mad: RMPP support for additional classes

Add RMPP support for additional management classes that support it.
Also, validate RMPP is consistent with management class specified.

Signed-off-by: Hal Rosenstock <halr@voltaire.com>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoIB/mad: include GID/class when matching receives
Jack Morgenstein [Wed, 29 Mar 2006 00:39:07 +0000 (16:39 -0800)]
IB/mad: include GID/class when matching receives

Received responses are currently matched against sent requests based
on TID only.  According to the spec, responses should match based on
the combination of TID, management class, and requester LID/GID.

Without the additional qualification, an agent that is responding to
two requests, both of which have the same TID, can match RMPP ACKs
with the incorrect transaction.  This problem can occur on the SM node
when responding to SA queries.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
18 years agoMerge branch 'mv-merge'
Jeff Garzik [Thu, 30 Mar 2006 00:43:31 +0000 (19:43 -0500)]
Merge branch 'mv-merge'

Conflicts:

drivers/scsi/sata_mv.c

18 years ago[PATCH] sata_mv: three bug fixes
Mark Lord [Wed, 29 Mar 2006 14:50:31 +0000 (09:50 -0500)]
[PATCH] sata_mv: three bug fixes

(1) A DMA transfer size of 0x10000 was not being written
as 0x0000 in the PRDs.  Fixed.

(1) The DEV_IRQ interrupt cause bit happens spuriously
during EDMA operation, and was not being ignored by the driver.
This led to various "drive busy" errors being reported,
with associated unpredictable behaviour.  Fixed.

(2) If a SATA or PCI interrupt was received with no outstanding
command, the interrupt handler still attempted to invoke
ata_qc_complete(), triggering assert()/BUG_ON() behaviour
elsewhere in libata.  Fixed.

The driver still has issues with confusion after error-recovery,
but should now  be reliable in the absence of drive errors.
I will be looking more into the error-handling bugs next.

Signed-Off-By: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] libata: ata_dev_init_params() fixes
Albert Lee [Mon, 27 Mar 2006 08:39:18 +0000 (16:39 +0800)]
[PATCH] libata: ata_dev_init_params() fixes

ata_dev_init_params() fixes:
- Get the "heads" and "sectors" parameters from caller instead of implicitly from dev->id[].
- Return AC_ERR_INVALID instead of 0 if an invalid parameter is found

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] libata: Fix interesting use of "extern" and also some bracketing
Alan Cox [Mon, 27 Mar 2006 18:01:32 +0000 (19:01 +0100)]
[PATCH] libata: Fix interesting use of "extern" and also some bracketing

Signed-off-by: Alan Cox <alan@redhat.com>
Last of the set, just clean up some oddments. Assuming the whole set is
now ok then the remaining differences are the setup of PIO_0 at reset
and the ->data_xfer method.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] libata: Simplex and other mode filtering logic
Alan Cox [Mon, 27 Mar 2006 17:58:20 +0000 (18:58 +0100)]
[PATCH] libata: Simplex and other mode filtering logic

Add a field to the host_set called 'flags' (was host_set_flags changed
to suit Jeff)
Add a simplex_claimed field so we can remember who owns the DMA channel
Add a ->mode_filter() hook to allow drivers to filter modes
Add docs for mode_filter and set_mode
Filter according to simplex state
Filter cable in core

This provides the needed framework to support all the mode rules found
in the PATA world. The simplex filter deals with 'to spec' simplex DMA
systems found in older chips. The cable filter avoids duplicating the
same rules in each chip driver with PATA. Finally the mode filter is
neccessary because drive/chip combinations have errata that forbid
certain modes with some drives or types of ATA object.

Drive speed setup remains per channel for now and the filters now use
the framework Tejun put into place which cleans them up a lot from the
older libata-pata patches.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] libata - ATA is both ATA and CFA
Alan Cox [Mon, 27 Mar 2006 17:49:19 +0000 (18:49 +0100)]
[PATCH] libata - ATA is both ATA and CFA

I think this is still needed with the new probe code (which btw seems to
be missing docs in upstream ?).

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] libata: Add ->set_mode hook for odd drivers
Alan Cox [Mon, 27 Mar 2006 17:46:37 +0000 (18:46 +0100)]
[PATCH] libata: Add ->set_mode hook for odd drivers

Some hardware doesn't want the usual mode setup logic running. This
allows the hardware driver to replace it for special cases in the least
invasive way possible.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] libata: BMDMA handling updates
Alan Cox [Mon, 27 Mar 2006 17:42:40 +0000 (18:42 +0100)]
[PATCH] libata: BMDMA handling updates

This is the minimal patch set to enable the current code to be used with
a controller following SFF (ie any PATA and early SATA controllers)
safely without crashes if there is no BMDMA area or if BMDMA is not
assigned by the BIOS for some reason.

Simplex status is recorded but not acted upon in this change, this isn't
a problem with the current drivers as none of them are for simplex
hardware. A following diff will deal with that.

The flags in the probe structure remain ->host_set_flags although Jeff
asked me to rename them, simply because the rename would break the usual
Linux rules that old code should break when there are changes. not
compile and run and then blow up/eat your computer/etc. Renaming this
later is a trivial exercise once a better name is chosen.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] ixp2000: fix gcc4 breakage
Lennert Buytenhek [Wed, 29 Mar 2006 13:12:44 +0000 (15:12 +0200)]
[PATCH] ixp2000: fix gcc4 breakage

gcc4 doesn't like us declaring a static function inside another
function.  We can do away with this construct altogether and use
BUILD_BUG_ON() instead (idea from Andi Kleen.)

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] b44: ensure valid mac addr
Gary Zambrano [Tue, 28 Mar 2006 22:57:38 +0000 (14:57 -0800)]
[PATCH] b44: ensure valid mac addr

Added code to check for invalid MAC address from eeprom or user input.

Signed-off-by: Gary Zambrano <zambrano@broadcom.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] Janitor: drivers/net/pcnet32: fix incorrect comments
Linas Vepstas [Tue, 28 Mar 2006 22:36:23 +0000 (16:36 -0600)]
[PATCH] Janitor: drivers/net/pcnet32: fix incorrect comments

The comments concerning how the pcnet32 ethernet device driver selects
the MAC addr to use are incorrect. A recent patch (in the last 3 months)
changed how the code worked, but did not change the comments.

Side comment: the new behaviour is good; I've got a pcnet32 card which
powers up with garbage in the CSR's, and a good MAC addr in the PROM.

Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] net: remove CONFIG_NET_CBUS conditional for NS8390
Arthur Othieno [Tue, 28 Mar 2006 22:09:01 +0000 (14:09 -0800)]
[PATCH] net: remove CONFIG_NET_CBUS conditional for NS8390

Don't bother testing for CONFIG_NET_CBUS ("NEC PC-9800 C-bus cards"); it went
out with the rest of PC98 subarch.

Signed-off-by: Arthur Othieno <apgo@patchbomb.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
18 years ago[PATCH] natsemi: Support oversized EEPROMs
Mark Brown [Tue, 28 Mar 2006 22:08:55 +0000 (14:08 -0800)]
[PATCH] natsemi: Support oversized EEPROMs

The natsemi chip can have a larger EEPROM attached than it itself uses for
configuration.  This patch adds support for user space access to such an
EEPROM.

Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Cc: Tim Hockin <thockin@hockin.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>