Nicholas Piggin [Tue, 10 Apr 2018 11:49:31 +0000 (21:49 +1000)]
powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops
commit
34dd25de9fe3f60bfdb31b473bf04b28262d0896 upstream.
This is the start of an effort to tidy up and standardise all the
delays. Existing loops have a range of delay/sleep periods from 1ms
to 20ms, and some have no delay. They all loop forever except rtc,
which times out after 10 retries, and that uses 10ms delays. So use
10ms as our standard delay. The OPAL maintainer agrees 10ms is a
reasonable starting point.
The idea is to use the same recipe everywhere, once this is proven to
work then it will be documented as an OPAL API standard. Then both
firmware and OS can agree, and if a particular call needs something
else, then that can be documented with reasoning.
This is not the end-all of this effort, it's just a relatively easy
change that fixes some existing high latency delays. There should be
provision for standardising timeouts and/or interruptible loops where
possible, so non-fatal firmware errors don't cause hangs.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Thu, 22 Mar 2018 10:41:46 +0000 (20:41 +1000)]
powerpc/64: Fix smp_wmb barrier definition use use lwsync consistently
commit
0bfdf598900fd62869659f360d3387ed80eb71cf upstream.
asm/barrier.h is not always included after asm/synch.h, which meant
it was missing __SUBARCH_HAS_LWSYNC, so in some files smp_wmb() would
be eieio when it should be lwsync. kernel/time/hrtimer.c is one case.
__SUBARCH_HAS_LWSYNC is only used in one place, so just fold it in
to where it's used. Previously with my small simulator config, 377
instances of eieio in the tree. After this patch there are 55.
Fixes:
46d075be585e ("powerpc: Optimise smp_wmb")
Cc: stable@vger.kernel.org # v2.6.29+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Piggin [Mon, 26 Mar 2018 15:02:33 +0000 (01:02 +1000)]
powerpc/powernv: Handle unknown OPAL errors in opal_nvram_write()
commit
741de617661794246f84a21a02fc5e327bffc9ad upstream.
opal_nvram_write currently just assumes success if it encounters an
error other than OPAL_BUSY or OPAL_BUSY_EVENT. Have it return -EIO
on other errors instead.
Fixes:
628daa8d5abf ("powerpc/powernv: Add RTC and NVRAM support plus RTAS fallbacks")
Cc: stable@vger.kernel.org # v3.2+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Ma [Mon, 8 Jan 2018 02:41:40 +0000 (10:41 +0800)]
HID: i2c-hid: fix size check and type usage
commit
ac75a041048b8c1f7418e27621ca5efda8571043 upstream.
When convert char array with signed int, if the inbuf[x] is negative then
upper bits will be set to 1. Fix this by using u8 instead of char.
ret_size has to be at least 3, hid_input_report use it after minus 2 bytes.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Sat, 31 Mar 2018 23:13:38 +0000 (18:13 -0500)]
smb3: Fix root directory when server returns inode number of zero
commit
7ea884c77e5c97f1e0a1a422d961d27f78ca2745 upstream.
Some servers return inode number zero for the root directory, which
causes ls to display incorrect data (missing "." and "..").
If the server returns zero for the inode number of the root directory,
fake an inode number for it.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thinh Nguyen [Mon, 19 Mar 2018 20:07:35 +0000 (13:07 -0700)]
usb: dwc3: pci: Properly cleanup resource
commit
cabdf83dadfb3d83eec31e0f0638a92dbd716435 upstream.
Platform device is allocated before adding resources. Make sure to
properly cleanup on error case.
Cc: <stable@vger.kernel.org>
Fixes:
f1c7e7108109 ("usb: dwc3: convert to pcim_enable_device()")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhengjun Xing [Wed, 21 Mar 2018 05:29:42 +0000 (13:29 +0800)]
USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
commit
64627388b50158fd24d6ad88132525b95a5ef573 upstream.
USB3 hubs don't support global suspend.
USB3 specification 10.10, Enhanced SuperSpeed hubs only support selective
suspend and resume, they do not support global suspend/resume where the
hub downstream facing ports states are not affected.
When system enters hibernation it first enters freeze process where only
the root hub enters suspend, usb_port_suspend() is not called for other
devices, and suspend status flags are not set for them. Other devices are
expected to suspend globally. Some external USB3 hubs will suspend the
downstream facing port at global suspend. These devices won't be resumed
at thaw as the suspend status flag is not set.
A USB3 removable hard disk connected through a USB3 hub that won't resume
at thaw will fail to synchronize SCSI cache, return “cmd cmplt err -71”
error, and needs a 60 seconds timeout which causing system hang for 60s
before the USB host reset the port for the USB3 removable hard disk to
recover.
Fix this by always calling usb_port_suspend() during freeze for USB3
devices.
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yavuz, Tuba [Fri, 23 Mar 2018 17:00:38 +0000 (17:00 +0000)]
USB: gadget: f_midi: fixing a possible double-free in f_midi
commit
7fafcfdf6377b18b2a726ea554d6e593ba44349f upstream.
It looks like there is a possibility of a double-free vulnerability on an
error path of the f_midi_set_alt function in the f_midi driver. If the
path is feasible then free_ep_req gets called twice:
req->complete = f_midi_complete;
err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC);
=> ...
usb_gadget_giveback_request
=>
f_midi_complete (CALLBACK)
(inside f_midi_complete, for various cases of status)
free_ep_req(ep, req); // first kfree
if (err) {
ERROR(midi, "%s: couldn't enqueue request: %d\n",
midi->out_ep->name, err);
free_ep_req(midi->out_ep, req); // second kfree
return err;
}
The double-free possibility was introduced with commit
ad0d1a058eac
("usb: gadget: f_midi: fix leak on failed to enqueue out requests").
Found by MOXCAFE tool.
Signed-off-by: Tuba Yavuz <tuba@ece.ufl.edu>
Fixes:
ad0d1a058eac ("usb: gadget: f_midi: fix leak on failed to enqueue out requests")
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Mon, 12 Feb 2018 10:55:23 +0000 (13:55 +0300)]
ACPI / hotplug / PCI: Check presence of slot itself in get_slot_status()
commit
13d3047c81505cc0fb9bdae7810676e70523c8bf upstream.
Mike Lothian reported that plugging in a USB-C device does not work
properly in his Dell Alienware system. This system has an Intel Alpine
Ridge Thunderbolt controller providing USB-C functionality. In these
systems the USB controller (xHCI) is hotplugged whenever a device is
connected to the port using ACPI-based hotplug.
The ACPI description of the root port in question is as follows:
Device (RP01)
{
Name (_ADR, 0x001C0000)
Device (PXSX)
{
Name (_ADR, 0x02)
Method (_RMV, 0, NotSerialized)
{
// ...
}
}
Here _ADR 0x02 means device 0, function 2 on the bus under root port (RP01)
but that seems to be incorrect because device 0 is the upstream port of the
Alpine Ridge PCIe switch and it has no functions other than 0 (the bridge
itself). When we get ACPI Notify() to the root port resulting from
connecting a USB-C device, Linux tries to read PCI_VENDOR_ID from device 0,
function 2 which of course always returns 0xffffffff because there is no
such function and we never find the device.
In Windows this works fine.
Now, since we get ACPI Notify() to the root port and not to the PXSX device
we should actually start our scan from there as well and not from the
non-existent PXSX device. Fix this by checking presence of the slot itself
(function 0) if we fail to do that otherwise.
While there use pci_bus_read_dev_vendor_id() in get_slot_status(), which is
the recommended way to read Device and Vendor IDs of devices on PCI buses.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198557
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Mon, 19 Mar 2018 17:01:45 +0000 (18:01 +0100)]
ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E
commit
bbf038618a24d72e2efc19146ef421bb1e1eda1a upstream.
Just like many other Samsung models, the 670Z5E needs to use the acpi-video
backlight interface rather then the native one for backlight control to
work, add a quirk for this.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1557060
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Thu, 8 Feb 2018 07:23:44 +0000 (10:23 +0300)]
regmap: Fix reversed bounds check in regmap_raw_write()
commit
f00e71091ab92eba52122332586c6ecaa9cd1a56 upstream.
We're supposed to be checking that "val_len" is not too large but
instead we check if it is smaller than the max.
The only function affected would be regmap_i2c_smbus_i2c_write() in
drivers/base/regmap/regmap-i2c.c. Strangely that function has its own
limit check which returns an error if (count >= I2C_SMBUS_BLOCK_MAX) so
it doesn't look like it has ever been able to do anything except return
an error.
Fixes:
c335931ed9d2 ("regmap: Add raw_write/read checks for max_raw_write/read sizes")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Andryuk [Wed, 28 Feb 2018 12:23:23 +0000 (07:23 -0500)]
xen-netfront: Fix hang on device removal
commit
c2d2e6738a209f0f9dffa2dc8e7292fc45360d61 upstream.
A toolstack may delete the vif frontend and backend xenstore entries
while xen-netfront is in the removal code path. In that case, the
checks for xenbus_read_driver_state would return XenbusStateUnknown, and
xennet_remove would hang indefinitely. This hang prevents system
shutdown.
xennet_remove must be able to handle XenbusStateUnknown, and
netback_changed must also wake up the wake_queue for that state as well.
Fixes:
5b5971df3bc2 ("xen-netfront: remove warning when unloading module")
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Cc: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Chevallier [Fri, 2 Mar 2018 14:55:09 +0000 (15:55 +0100)]
spi: Fix scatterlist elements size in spi_map_buf
commit
ce99319a182fe766be67f96338386f3ec73e321c upstream.
When SPI transfers can be offloaded using DMA, the SPI core need to
build a scatterlist to make sure that the buffer to be transferred is
dma-able.
This patch fixes the scatterlist entry size computation in the case
where the maximum acceptable scatterlist entry supported by the DMA
controller is less than PAGE_SIZE, when the buffer is vmalloced.
For each entry, the actual size is given by the minimum between the
desc_len (which is the max buffer size supported by the DMA controller)
and the remaining buffer length until we cross a page boundary.
Fixes:
65598c13fd66 ("spi: Fix per-page mapping of unaligned vmalloc-ed buffer")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Santiago Esteban [Thu, 18 Jan 2018 14:38:47 +0000 (15:38 +0100)]
ARM: dts: at91: sama5d4: fix pinctrl compatible string
commit
9a06757dcc8509c162ac00488c8c82fc98e04227 upstream.
The compatible string is incorrect. Add atmel,sama5d3-pinctrl since
it's the appropriate compatible string. Remove the
atmel,at91rm9200-pinctrl compatible string, this fallback is
useless, there are too many changes.
Signed-off-by: Santiago Esteban <Santiago.Esteban@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: stable@vger.kernel.org #v3.18
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Fri, 2 Mar 2018 16:07:42 +0000 (17:07 +0100)]
ARM: dts: exynos: Fix IOMMU support for GScaler devices on Exynos5250
commit
6f4870753f29edf7dc39444246f9e39987b8b158 upstream.
The proper name for the property, which assign given device to IOMMU is
'iommus', not 'iommu'. Fix incorrect name and let all GScaler devices
to be properly handled when IOMMU support is enabled.
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes:
6cbfdd73a94f ("ARM: dts: add sysmmu nodes for exynos5250")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicolas Ferre [Tue, 13 Mar 2018 15:20:05 +0000 (16:20 +0100)]
ARM: dts: at91: at91sam9g25: fix mux-mask pinctrl property
commit
e8fd0adf105e132fd84545997bbef3d5edc2c9c1 upstream.
There are only 19 PIOB pins having primary names PB0-PB18. Not all of them
have a 'C' function. So the pinctrl property mask ends up being the same as the
other SoC of the at91sam9x5 series.
Reported-by: Marek Sieranski <marek.sieranski@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Mon, 26 Mar 2018 10:14:46 +0000 (13:14 +0300)]
usb: gadget: udc: core: update usb_ep_queue() documentation
commit
eaa358c7790338d83bb6a31258bdc077de120414 upstream.
Mention that ->complete() should never be called from within
usb_ep_queue().
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heinrich Schuchardt [Thu, 29 Mar 2018 15:48:28 +0000 (10:48 -0500)]
usb: musb: gadget: misplaced out of bounds check
commit
af6f8529098aeb0e56a68671b450cf74e7a64fcd upstream.
musb->endpoints[] has array size MUSB_C_NUM_EPS.
We must check array bounds before accessing the array and not afterwards.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Bin Liu <b-liu@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlastimil Babka [Fri, 13 Apr 2018 22:35:38 +0000 (15:35 -0700)]
mm, slab: reschedule cache_reap() on the same CPU
commit
a9f2a846f0503e7d729f552e3ccfe2279010fe94 upstream.
cache_reap() is initially scheduled in start_cpu_timer() via
schedule_delayed_work_on(). But then the next iterations are scheduled
via schedule_delayed_work(), i.e. using WORK_CPU_UNBOUND.
Thus since commit
ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND
work on wq_unbound_cpumask CPUs") there is no guarantee the future
iterations will run on the originally intended cpu, although it's still
preferred. I was able to demonstrate this with
/sys/module/workqueue/parameters/debug_force_rr_cpu. IIUC, it may also
happen due to migrating timers in nohz context. As a result, some cpu's
would be calling cache_reap() more frequently and others never.
This patch uses schedule_delayed_work_on() with the current cpu when
scheduling the next iteration.
Link: http://lkml.kernel.org/r/20180411070007.32225-1-vbabka@suse.cz
Fixes:
ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 13 Apr 2018 22:35:30 +0000 (15:35 -0700)]
ipc/shm: fix use-after-free of shm file via remap_file_pages()
commit
3f05317d9889ab75c7190dcd39491d2a97921984 upstream.
syzbot reported a use-after-free of shm_file_data(file)->file->f_op in
shm_get_unmapped_area(), called via sys_remap_file_pages().
Unfortunately it couldn't generate a reproducer, but I found a bug which
I think caused it. When remap_file_pages() is passed a full System V
shared memory segment, the memory is first unmapped, then a new map is
created using the ->vm_file. Between these steps, the shm ID can be
removed and reused for a new shm segment. But, shm_mmap() only checks
whether the ID is currently valid before calling the underlying file's
->mmap(); it doesn't check whether it was reused. Thus it can use the
wrong underlying file, one that was already freed.
Fix this by making the "outer" shm file (the one that gets put in
->vm_file) hold a reference to the real shm file, and by making
__shm_open() require that the file associated with the shm ID matches
the one associated with the "outer" file.
Taking the reference to the real shm file is needed to fully solve the
problem, since otherwise sfd->file could point to a freed file, which
then could be reallocated for the reused shm ID, causing the wrong shm
segment to be mapped (and without the required permission checks).
Commit
1ac0b6dec656 ("ipc/shm: handle removed segments gracefully in
shm_mmap()") almost fixed this bug, but it didn't go far enough because
it didn't consider the case where the shm ID is reused.
The following program usually reproduces this bug:
#include <stdlib.h>
#include <sys/shm.h>
#include <sys/syscall.h>
#include <unistd.h>
int main()
{
int is_parent = (fork() != 0);
srand(getpid());
for (;;) {
int id = shmget(0xF00F, 4096, IPC_CREAT|0700);
if (is_parent) {
void *addr = shmat(id, NULL, 0);
usleep(rand() % 50);
while (!syscall(__NR_remap_file_pages, addr, 4096, 0, 0, 0));
} else {
usleep(rand() % 50);
shmctl(id, IPC_RMID, NULL);
}
}
}
It causes the following NULL pointer dereference due to a 'struct file'
being used while it's being freed. (I couldn't actually get a KASAN
use-after-free splat like in the syzbot report. But I think it's
possible with this bug; it would just take a more extraordinary race...)
BUG: unable to handle kernel NULL pointer dereference at
0000000000000058
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 9 PID: 258 Comm: syz_ipc Not tainted
4.16.0-05140-gf8cf2f16a7c95 #189
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
RIP: 0010:d_inode include/linux/dcache.h:519 [inline]
RIP: 0010:touch_atime+0x25/0xd0 fs/inode.c:1724
[...]
Call Trace:
file_accessed include/linux/fs.h:2063 [inline]
shmem_mmap+0x25/0x40 mm/shmem.c:2149
call_mmap include/linux/fs.h:1789 [inline]
shm_mmap+0x34/0x80 ipc/shm.c:465
call_mmap include/linux/fs.h:1789 [inline]
mmap_region+0x309/0x5b0 mm/mmap.c:1712
do_mmap+0x294/0x4a0 mm/mmap.c:1483
do_mmap_pgoff include/linux/mm.h:2235 [inline]
SYSC_remap_file_pages mm/mmap.c:2853 [inline]
SyS_remap_file_pages+0x232/0x310 mm/mmap.c:2769
do_syscall_64+0x64/0x1a0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ebiggers@google.com: add comment]
Link: http://lkml.kernel.org/r/20180410192850.235835-1-ebiggers3@gmail.com
Link: http://lkml.kernel.org/r/20180409043039.28915-1-ebiggers3@gmail.com
Reported-by: syzbot+d11f321e7f1923157eac80aa990b446596f46439@syzkaller.appspotmail.com
Fixes:
c8d78c1823f4 ("mm: replace remap_file_pages() syscall with emulation")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 13 Apr 2018 22:35:13 +0000 (15:35 -0700)]
resource: fix integer overflow at reallocation
commit
60bb83b81169820c691fbfa33a6a4aef32aa4b0b upstream.
We've got a bug report indicating a kernel panic at booting on an x86-32
system, and it turned out to be the invalid PCI resource assigned after
reallocation. __find_resource() first aligns the resource start address
and resets the end address with start+size-1 accordingly, then checks
whether it's contained. Here the end address may overflow the integer,
although resource_contains() still returns true because the function
validates only start and end address. So this ends up with returning an
invalid resource (start > end).
There was already an attempt to cover such a problem in the commit
47ea91b4052d ("Resource: fix wrong resource window calculation"), but
this case is an overseen one.
This patch adds the validity check of the newly calculated resource for
avoiding the integer overflow problem.
Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=
1086739
Link: http://lkml.kernel.org/r/s5hpo37d5l8.wl-tiwai@suse.de
Fixes:
23c570a67448 ("resource: ability to resize an allocated resource")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Michael Henders <hendersm@shaw.ca>
Tested-by: Michael Henders <hendersm@shaw.ca>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Morton [Tue, 10 Apr 2018 23:34:41 +0000 (16:34 -0700)]
fs/reiserfs/journal.c: add missing resierfs_warning() arg
commit
9ad553abe66f8be3f4755e9fa0a6ba137ce76341 upstream.
One use of the reiserfs_warning() macro in journal_init_dev() is missing
a parameter, causing the following warning:
REISERFS warning (device loop0): journal_init_dev: Cannot open '%s': %i journal_init_dev:
This also causes a WARN_ONCE() warning in the vsprintf code, and then a
panic if panic_on_warn is set.
Please remove unsupported %/ in format string
WARNING: CPU: 1 PID: 4480 at lib/vsprintf.c:2138 format_decode+0x77f/0x830 lib/vsprintf.c:2138
Kernel panic - not syncing: panic_on_warn set ...
Just add another string argument to the macro invocation.
Addresses https://syzkaller.appspot.com/bug?id=
0627d4551fdc39bf1ef5d82cd9eef587047f7718
Link: http://lkml.kernel.org/r/d678ebe1-6f54-8090-df4c-b9affad62293@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: <syzbot+6bd77b88c1977c03f584@syzkaller.appspotmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Sat, 3 Mar 2018 10:45:54 +0000 (11:45 +0100)]
ubi: Reject MLC NAND
commit
b5094b7f135be34630e3ea8a98fa215715d0f29d upstream.
While UBI and UBIFS seem to work at first sight with MLC NAND, you will
most likely lose all your data upon a power-cut or due to read/write
disturb.
In order to protect users from bad surprises, refuse to attach to MLC
NAND.
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Romain Izard [Mon, 29 Jan 2018 10:18:20 +0000 (11:18 +0100)]
ubi: Fix error for write access
commit
78a8dfbabbece22bee58ac4cb26cab10e7a19c5d upstream.
When opening a device with write access, ubiblock_open returns an error
code. Currently, this error code is -EPERM, but this is not the right
value.
The open function for other block devices returns -EROFS when opening
read-only devices with FMODE_WRITE set. When used with dm-verity, the
veritysetup userspace tool is expecting EROFS, and refuses to use the
ubiblock device.
Use -EROFS for ubiblock as well. As a result, veritysetup accepts the
ubiblock device as valid.
Cc: stable@vger.kernel.org
Fixes:
9d54c8a33eec (UBI: R/O block driver on top of UBI volumes)
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Wed, 17 Jan 2018 22:15:57 +0000 (23:15 +0100)]
ubi: fastmap: Don't flush fastmap work on detach
commit
29b7a6fa1ec07e8480b0d9caf635a4498a438bf4 upstream.
At this point UBI volumes have already been free()'ed and fastmap can no
longer access these data structures.
Reported-by: Martin Townsend <mtownsend1973@gmail.com>
Fixes:
74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system")
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Weinberger [Wed, 17 Jan 2018 18:12:42 +0000 (19:12 +0100)]
ubifs: Check ubifs_wbuf_sync() return code
commit
aac17948a7ce01fb60b9ee6cf902967a47b3ce26 upstream.
If ubifs_wbuf_sync() fails we must not write a master node with the
dirty marker cleared.
Otherwise it is possible that in case of an IO error while syncing we
mark the filesystem as clean and UBIFS refuses to recover upon next
mount.
Cc: <stable@vger.kernel.org>
Fixes:
1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Tue, 13 Feb 2018 15:38:08 +0000 (07:38 -0800)]
tty: make n_tty_read() always abort if hangup is in progress
commit
28b0f8a6962a24ed21737578f3b1b07424635c9e upstream.
A tty is hung up by __tty_hangup() setting file->f_op to
hung_up_tty_fops, which is skipped on ttys whose write operation isn't
tty_write(). This means that, for example, /dev/console whose write
op is redirected_tty_write() is never actually marked hung up.
Because n_tty_read() uses the hung up status to decide whether to
abort the waiting readers, the lack of hung-up marking can lead to the
following scenario.
1. A session contains two processes. The leader and its child. The
child ignores SIGHUP.
2. The leader exits and starts disassociating from the controlling
terminal (/dev/console).
3. __tty_hangup() skips setting f_op to hung_up_tty_fops.
4. SIGHUP is delivered and ignored.
5. tty_ldisc_hangup() is invoked. It wakes up the waits which should
clear the read lockers of tty->ldisc_sem.
6. The reader wakes up but because tty_hung_up_p() is false, it
doesn't abort and goes back to sleep while read-holding
tty->ldisc_sem.
7. The leader progresses to tty_ldisc_lock() in tty_ldisc_hangup()
and is now stuck in D sleep indefinitely waiting for
tty->ldisc_sem.
The following is Alan's explanation on why some ttys aren't hung up.
http://lkml.kernel.org/r/
20171101170908.
6ad08580@alans-desktop
1. It broke the serial consoles because they would hang up and close
down the hardware. With tty_port that *should* be fixable properly
for any cases remaining.
2. The console layer was (and still is) completely broken and doens't
refcount properly. So if you turn on console hangups it breaks (as
indeed does freeing consoles and half a dozen other things).
As neither can be fixed quickly, this patch works around the problem
by introducing a new flag, TTY_HUPPING, which is used solely to tell
n_tty_read() that hang-up is in progress for the console and the
readers should be aborted regardless of the hung-up status of the
device.
The following is a sample hung task warning caused by this issue.
INFO: task agetty:2662 blocked for more than 120 seconds.
Not tainted
4.11.3-dbg-tty-lockup-02478-gfd6c7ee-dirty #28
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
0 2662 1 0x00000086
Call Trace:
__schedule+0x267/0x890
schedule+0x36/0x80
schedule_timeout+0x23c/0x2e0
ldsem_down_write+0xce/0x1f6
tty_ldisc_lock+0x16/0x30
tty_ldisc_hangup+0xb3/0x1b0
__tty_hangup+0x300/0x410
disassociate_ctty+0x6c/0x290
do_exit+0x7ef/0xb00
do_group_exit+0x3f/0xa0
get_signal+0x1b3/0x5d0
do_signal+0x28/0x660
exit_to_usermode_loop+0x46/0x86
do_syscall_64+0x9c/0xb0
entry_SYSCALL64_slow_path+0x25/0x25
The following is the repro. Run "$PROG /dev/console". The parent
process hangs in D state.
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <signal.h>
#include <time.h>
#include <termios.h>
int main(int argc, char **argv)
{
struct sigaction sact = { .sa_handler = SIG_IGN };
struct timespec ts1s = { .tv_sec = 1 };
pid_t pid;
int fd;
if (argc < 2) {
fprintf(stderr, "test-hung-tty /dev/$TTY\n");
return 1;
}
/* fork a child to ensure that it isn't already the session leader */
pid = fork();
if (pid < 0) {
perror("fork");
return 1;
}
if (pid > 0) {
/* top parent, wait for everyone */
while (waitpid(-1, NULL, 0) >= 0)
;
if (errno != ECHILD)
perror("waitpid");
return 0;
}
/* new session, start a new session and set the controlling tty */
if (setsid() < 0) {
perror("setsid");
return 1;
}
fd = open(argv[1], O_RDWR);
if (fd < 0) {
perror("open");
return 1;
}
if (ioctl(fd, TIOCSCTTY, 1) < 0) {
perror("ioctl");
return 1;
}
/* fork a child, sleep a bit and exit */
pid = fork();
if (pid < 0) {
perror("fork");
return 1;
}
if (pid > 0) {
nanosleep(&ts1s, NULL);
printf("Session leader exiting\n");
exit(0);
}
/*
* The child ignores SIGHUP and keeps reading from the controlling
* tty. Because SIGHUP is ignored, the child doesn't get killed on
* parent exit and the bug in n_tty makes the read(2) block the
* parent's control terminal hangup attempt. The parent ends up in
* D sleep until the child is explicitly killed.
*/
sigaction(SIGHUP, &sact, NULL);
printf("Child reading tty\n");
while (1) {
char buf[1024];
if (read(fd, buf, sizeof(buf)) < 0) {
perror("read");
return 1;
}
}
return 0;
}
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@llwyncelyn.cymru>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 20 Apr 2018 06:21:08 +0000 (08:21 +0200)]
Linux 4.9.95
Greg Kroah-Hartman [Thu, 19 Apr 2018 14:00:32 +0000 (16:00 +0200)]
Revert "net: phy: micrel: Restore led_mode and clk_sel on resume"
This reverts commit
d7ba3c00047dfd88fe0360a2d27169b54c88c4f1 which was
commit
79e498a9c7da0737829ff864aae44df434105676 upstream.
Turns out it breaks things, so drop it.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Cc: Dan Rue <dan.rue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 5 Feb 2018 15:34:24 +0000 (15:34 +0000)]
arm64: futex: Mask __user pointers prior to dereference
commit
91b2d3442f6a44dce875670d702af22737ad5eff upstream.
The arm64 futex code has some explicit dereferencing of user pointers
where performing atomic operations in response to a futex command. This
patch uses masking to limit any speculative futex operations to within
the user address space.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Phil Elwell [Wed, 11 Apr 2018 09:59:17 +0000 (10:59 +0100)]
lan78xx: Correctly indicate invalid OTP
[ Upstream commit
4bfc33807a9a02764bdd1e42e794b3b401240f27 ]
lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP
content, but the value gets overwritten before it is returned and the
read goes ahead anyway. Make the read conditional as it should be
and preserve the error code.
Fixes:
55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Hajnoczi [Wed, 11 Apr 2018 02:35:40 +0000 (10:35 +0800)]
vhost: fix vhost_vq_access_ok() log check
[ Upstream commit
d14d2b78090c7de0557362b26a4ca591aa6a9faa ]
Commit
d65026c6c62e7d9616c8ceb5a53b68bcdc050525 ("vhost: validate log
when IOTLB is enabled") introduced a regression. The logic was
originally:
if (vq->iotlb)
return 1;
return A && B;
After the patch the short-circuit logic for A was inverted:
if (A || vq->iotlb)
return A;
return B;
This patch fixes the regression by rewriting the checks in the obvious
way, no longer returning A when vq->iotlb is non-NULL (which is hard to
understand).
Reported-by: syzbot+65a84dde0214b0387ccd@syzkaller.appspotmail.com
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejaswi Tanikella [Wed, 11 Apr 2018 11:04:47 +0000 (16:34 +0530)]
slip: Check if rstate is initialized before uncompressing
[ Upstream commit
3f01ddb962dc506916c243f9524e8bef97119b77 ]
On receiving a packet the state index points to the rstate which must be
used to fill up IP and TCP headers. But if the state index points to a
rstate which is unitialized, i.e. filled with zeros, it gets stuck in an
infinite loop inside ip_fast_csum trying to compute the ip checsum of a
header with zero length.
89.666953: <2> [<
ffffff9dd3e94d38>] slhc_uncompress+0x464/0x468
89.666965: <2> [<
ffffff9dd3e87d88>] ppp_receive_nonmp_frame+0x3b4/0x65c
89.666978: <2> [<
ffffff9dd3e89dd4>] ppp_receive_frame+0x64/0x7e0
89.666991: <2> [<
ffffff9dd3e8a708>] ppp_input+0x104/0x198
89.667005: <2> [<
ffffff9dd3e93868>] pppopns_recv_core+0x238/0x370
89.667027: <2> [<
ffffff9dd4428fc8>] __sk_receive_skb+0xdc/0x250
89.667040: <2> [<
ffffff9dd3e939e4>] pppopns_recv+0x44/0x60
89.667053: <2> [<
ffffff9dd4426848>] __sock_queue_rcv_skb+0x16c/0x24c
89.667065: <2> [<
ffffff9dd4426954>] sock_queue_rcv_skb+0x2c/0x38
89.667085: <2> [<
ffffff9dd44f7358>] raw_rcv+0x124/0x154
89.667098: <2> [<
ffffff9dd44f7568>] raw_local_deliver+0x1e0/0x22c
89.667117: <2> [<
ffffff9dd44c8ba0>] ip_local_deliver_finish+0x70/0x24c
89.667131: <2> [<
ffffff9dd44c92f4>] ip_local_deliver+0x100/0x10c
./scripts/faddr2line vmlinux slhc_uncompress+0x464/0x468 output:
ip_fast_csum at arch/arm64/include/asm/checksum.h:40
(inlined by) slhc_uncompress at drivers/net/slip/slhc.c:615
Adding a variable to indicate if the current rstate is initialized. If
such a packet arrives, move to toss state.
Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ka-Cheong Poon [Wed, 11 Apr 2018 07:57:25 +0000 (00:57 -0700)]
rds: MP-RDS may use an invalid c_path
[ Upstream commit
a43cced9a348901f9015f4730b70b69e7c41a9c9 ]
rds_sendmsg() calls rds_send_mprds_hash() to find a c_path to use to
send a message. Suppose the RDS connection is not yet up. In
rds_send_mprds_hash(), it does
if (conn->c_npaths == 0)
wait_event_interruptible(conn->c_hs_waitq,
(conn->c_npaths != 0));
If it is interrupted before the connection is set up,
rds_send_mprds_hash() will return a non-zero hash value. Hence
rds_sendmsg() will use a non-zero c_path to send the message. But if
the RDS connection ends up to be non-MP capable, the message will be
lost as only the zero c_path can be used.
Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bassem Boubaker [Wed, 11 Apr 2018 11:15:53 +0000 (13:15 +0200)]
cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN
[ Upstream commit
53765341ee821c0a0f1dec41adc89c9096ad694c ]
The Cinterion AHS8 is a 3G device with one embedded WWAN interface
using cdc_ether as a driver.
The modem is controlled via AT commands through the exposed TTYs.
AT+CGDCONT write command can be used to activate or deactivate a WWAN
connection for a PDP context defined with the same command. UE
supports one WWAN adapter.
Signed-off-by: Bassem Boubaker <bassem.boubaker@actia.fr>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marek Szyprowski [Mon, 15 Jan 2018 13:58:21 +0000 (14:58 +0100)]
hwmon: (ina2xx) Fix access to uninitialized mutex
commit
0c4c5860e9983eb3da7a3d73ca987643c3ed034b upstream.
Initialize data->config_lock mutex before it is used by the driver code.
This fixes following warning on Odroid XU3 boards:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 5 PID: 1 Comm: swapper/0 Not tainted
4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<
c0111504>] (unwind_backtrace) from [<
c010dbec>] (show_stack+0x10/0x14)
[<
c010dbec>] (show_stack) from [<
c09b3f74>] (dump_stack+0x90/0xc8)
[<
c09b3f74>] (dump_stack) from [<
c0179528>] (register_lock_class+0x1c0/0x59c)
[<
c0179528>] (register_lock_class) from [<
c017bd1c>] (__lock_acquire+0x78/0x1850)
[<
c017bd1c>] (__lock_acquire) from [<
c017de30>] (lock_acquire+0xc8/0x2b8)
[<
c017de30>] (lock_acquire) from [<
c09ca59c>] (__mutex_lock+0x60/0xa0c)
[<
c09ca59c>] (__mutex_lock) from [<
c09cafd0>] (mutex_lock_nested+0x1c/0x24)
[<
c09cafd0>] (mutex_lock_nested) from [<
c068b0d0>] (ina2xx_set_shunt+0x70/0xb0)
[<
c068b0d0>] (ina2xx_set_shunt) from [<
c068b218>] (ina2xx_probe+0x88/0x1b0)
[<
c068b218>] (ina2xx_probe) from [<
c0673d90>] (i2c_device_probe+0x1e0/0x2d0)
[<
c0673d90>] (i2c_device_probe) from [<
c053a268>] (driver_probe_device+0x2b8/0x4a0)
[<
c053a268>] (driver_probe_device) from [<
c053a54c>] (__driver_attach+0xfc/0x120)
[<
c053a54c>] (__driver_attach) from [<
c05384cc>] (bus_for_each_dev+0x58/0x7c)
[<
c05384cc>] (bus_for_each_dev) from [<
c0539590>] (bus_add_driver+0x174/0x250)
[<
c0539590>] (bus_add_driver) from [<
c053b5e0>] (driver_register+0x78/0xf4)
[<
c053b5e0>] (driver_register) from [<
c0675ef0>] (i2c_register_driver+0x38/0xa8)
[<
c0675ef0>] (i2c_register_driver) from [<
c0102b40>] (do_one_initcall+0x48/0x18c)
[<
c0102b40>] (do_one_initcall) from [<
c0e00df0>] (kernel_init_freeable+0x110/0x1d4)
[<
c0e00df0>] (kernel_init_freeable) from [<
c09c8120>] (kernel_init+0x8/0x114)
[<
c09c8120>] (kernel_init) from [<
c01010b4>] (ret_from_fork+0x14/0x20)
Fixes:
5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[backport to v4.4.y/v4.9.y: context changes]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sudhir Sreedharan [Thu, 15 Feb 2018 07:22:45 +0000 (12:52 +0530)]
rtl8187: Fix NULL pointer dereference in priv->conf_mutex
commit
7972326a26b5bf8dc2adac575c4e03ee7e9d193a upstream.
This can be reproduced by bind/unbind the driver multiple times
in AM3517 board.
Analysis revealed that rtl8187_start() was invoked before probe
finishes(ie. before the mutex is initialized).
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
Hardware name: Generic AM3517 (Flattened Device Tree)
[<
c010e0d8>] (unwind_backtrace) from [<
c010beac>] (show_stack+0x10/0x14)
[<
c010beac>] (show_stack) from [<
c017401c>] (register_lock_class+0x4f4/0x55c)
[<
c017401c>] (register_lock_class) from [<
c0176fe0>] (__lock_acquire+0x74/0x1938)
[<
c0176fe0>] (__lock_acquire) from [<
c0178cfc>] (lock_acquire+0xfc/0x23c)
[<
c0178cfc>] (lock_acquire) from [<
c08aa2f8>] (mutex_lock_nested+0x50/0x3b0)
[<
c08aa2f8>] (mutex_lock_nested) from [<
c05f5bf8>] (rtl8187_start+0x2c/0xd54)
[<
c05f5bf8>] (rtl8187_start) from [<
c082dea0>] (drv_start+0xa8/0x320)
[<
c082dea0>] (drv_start) from [<
c084d1d4>] (ieee80211_do_open+0x2bc/0x8e4)
[<
c084d1d4>] (ieee80211_do_open) from [<
c069be94>] (__dev_open+0xb8/0x120)
[<
c069be94>] (__dev_open) from [<
c069c11c>] (__dev_change_flags+0x88/0x14c)
[<
c069c11c>] (__dev_change_flags) from [<
c069c1f8>] (dev_change_flags+0x18/0x48)
[<
c069c1f8>] (dev_change_flags) from [<
c0710b08>] (devinet_ioctl+0x738/0x840)
[<
c0710b08>] (devinet_ioctl) from [<
c067925c>] (sock_ioctl+0x164/0x2f4)
[<
c067925c>] (sock_ioctl) from [<
c02883f8>] (do_vfs_ioctl+0x8c/0x9d0)
[<
c02883f8>] (do_vfs_ioctl) from [<
c0288da8>] (SyS_ioctl+0x6c/0x7c)
[<
c0288da8>] (SyS_ioctl) from [<
c0107760>] (ret_fast_syscall+0x0/0x1c)
Unable to handle kernel NULL pointer dereference at virtual address
00000000
pgd =
cd1ec000
[
00000000] *pgd=
8d1de831, *pte=
00000000, *ppte=
00000000
Internal error: Oops: 817 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 821 Comm: wpa_supplicant Not tainted 4.9.80-dirty #250
Hardware name: Generic AM3517 (Flattened Device Tree)
task:
ce73eec0 task.stack:
cd1ea000
PC is at mutex_lock_nested+0xe8/0x3b0
LR is at mutex_lock_nested+0xd0/0x3b0
Cc: stable@vger.kernel.org
Signed-off-by: Sudhir Sreedharan <ssreedharan@mvista.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Szymon Janc [Tue, 3 Apr 2018 11:40:06 +0000 (13:40 +0200)]
Bluetooth: Fix connection if directed advertising and privacy is used
commit
082f2300cfa1a3d9d5221c38c5eba85d4ab98bd8 upstream.
Local random address needs to be updated before creating connection if
RPA from LE Direct Advertising Report was resolved in host. Otherwise
remote device might ignore connection request due to address mismatch.
This was affecting following qualification test cases:
GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C
Before patch:
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216
Address: 56:BC:E8:24:11:68 (Resolvable)
Identity type: Random (0x01)
Identity: F2:F1:06:3D:9C:42 (Static)
> HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Random (0x01)
Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02)
> HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387
LE Direct Advertising Report (0x0b)
Num reports: 1
Event type: Connectable directed - ADV_DIRECT_IND (0x01)
Address type: Random (0x01)
Address: 53:38:DA:46:8C:45 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Direct address type: Random (0x01)
Direct address: 7C:D6:76:8C:DF:82 (Resolvable)
Identity type: Random (0x01)
Identity: F2:F1:06:3D:9C:42 (Static)
RSSI: -74 dBm (0xb6)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
< HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444
Scan interval: 60.000 msec (0x0060)
Scan window: 60.000 msec (0x0060)
Filter policy: White list is not used (0x00)
Peer address type: Random (0x01)
Peer address: 53:38:DA:46:8C:45 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Own address type: Random (0x01)
Min connection interval: 30.00 msec (0x0018)
Max connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971
LE Create Connection (0x08|0x000d) ncmd 1
Status: Success (0x00)
< HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385
> HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014
LE Create Connection Cancel (0x08|0x000e) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074
LE Connection Complete (0x01)
Status: Unknown Connection Identifier (0x02)
Handle: 0
Role: Master (0x00)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Connection interval: 0.00 msec (0x0000)
Connection latency: 0 (0x0000)
Supervision timeout: 0 msec (0x0000)
Master clock accuracy: 0x00
After patch:
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Random (0x01)
Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02)
> HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613
LE Set Scan Parameters (0x08|0x000b) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704
Scanning: Enabled (0x01)
Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619
LE Direct Advertising Report (0x0b)
Num reports: 1
Event type: Connectable directed - ADV_DIRECT_IND (0x01)
Address type: Random (0x01)
Address: 50:52:D9:A6:48:A0 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Direct address type: Random (0x01)
Direct address: 7C:C1:57:A5:B7:A8 (Resolvable)
Identity type: Random (0x01)
Identity: F4:28:73:5D:38:B0 (Static)
RSSI: -70 dBm (0xba)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704
Scanning: Disabled (0x00)
Filter duplicates: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599
LE Set Scan Enable (0x08|0x000c) ncmd 1
Status: Success (0x00)
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645
Address: 7C:C1:57:A5:B7:A8 (Resolvable)
Identity type: Random (0x01)
Identity: F4:28:73:5D:38:B0 (Static)
> HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590
LE Set Random Address (0x08|0x0005) ncmd 1
Status: Success (0x00)
< HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613
Scan interval: 60.000 msec (0x0060)
Scan window: 60.000 msec (0x0060)
Filter policy: White list is not used (0x00)
Peer address type: Random (0x01)
Peer address: 50:52:D9:A6:48:A0 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Own address type: Random (0x01)
Min connection interval: 30.00 msec (0x0018)
Max connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Min connection length: 0.000 msec (0x0000)
Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558
LE Create Connection (0x08|0x000d) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 0
Role: Master (0x00)
Peer address type: Random (0x01)
Peer address: 50:52:D9:A6:48:A0 (Resolvable)
Identity type: Public (0x00)
Identity: 11:22:33:44:55:66 (OUI 11-22-33)
Connection interval: 50.00 msec (0x0028)
Connection latency: 0 (0x0000)
Supervision timeout: 420 msec (0x002a)
Master clock accuracy: 0x07
@ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996
LE Address: 11:22:33:44:55:66 (OUI 11-22-33)
Flags: 0x00000000
Data length: 0
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sun, 8 Apr 2018 15:57:10 +0000 (11:57 -0400)]
getname_kernel() needs to make sure that ->name != ->iname in long case
commit
30ce4d1903e1d8a7ccd110860a5eef3c638ed8be upstream.
missed it in "kill struct filename.separate" several years ago.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Gorbik [Tue, 3 Apr 2018 14:02:15 +0000 (16:02 +0200)]
s390/ipl: ensure loadparm valid flag is set
commit
15deb080a6087b73089139569558965750e69d67 upstream.
When loadparm is set in reipl parm block, the kernel should also set
DIAG308_FLAGS_LP_VALID flag.
This fixes loadparm ignoring during z/VM fcp -> ccw reipl and kvm direct
boot -> ccw reipl.
Cc: <stable@vger.kernel.org>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Wed, 7 Mar 2018 13:01:01 +0000 (14:01 +0100)]
s390/qdio: don't merge ERROR output buffers
commit
0cf1e05157b9e5530dcc3ca9fec9bf617fc93375 upstream.
On an Output queue, both EMPTY and PENDING buffer states imply that the
buffer is ready for completion-processing by the upper-layer drivers.
So for a non-QEBSM Output queue, get_buf_states() merges mixed
batches of PENDING and EMPTY buffers into one large batch of EMPTY
buffers. The upper-layer driver (ie. qeth) later distuingishes PENDING
from EMPTY by inspecting the slsb_state for
QDIO_OUTBUF_STATE_FLAG_PENDING.
But the merge logic in get_buf_states() contains a bug that causes us to
erronously also merge ERROR buffers into such a batch of EMPTY buffers
(ERROR is 0xaf, EMPTY is 0xa1; so ERROR & EMPTY == EMPTY).
Effectively, most outbound ERROR buffers are currently discarded
silently and processed as if they had succeeded.
Note that this affects _all_ non-QEBSM device types, not just IQD with CQ.
Fix it by explicitly spelling out the exact conditions for merging.
For extracting the "get initial state" part out of the loop, this relies
on the fact that get_buf_states() is never called with a count of 0. The
QEBSM path already strictly requires this, and the two callers with
variable 'count' make sure of it.
Fixes:
104ea556ee7f ("qdio: support asynchronous delivery of storage blocks")
Cc: <stable@vger.kernel.org> #v3.2+
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Julian Wiedmann [Mon, 5 Mar 2018 08:39:38 +0000 (09:39 +0100)]
s390/qdio: don't retry EQBS after CCQ 96
commit
dae55b6fef58530c13df074bcc182c096609339e upstream.
Immediate retry of EQBS after CCQ 96 means that we potentially misreport
the state of buffers inspected during the first EQBS call.
This occurs when
1. the first EQBS finds all inspected buffers still in the initial state
set by the driver (ie INPUT EMPTY or OUTPUT PRIMED),
2. the EQBS terminates early with CCQ 96, and
3. by the time that the second EQBS comes around, the state of those
previously inspected buffers has changed.
If the state reported by the second EQBS is 'driver-owned', all we know
is that the previous buffers are driver-owned now as well. But we can't
tell if they all have the same state. So for instance
- the second EQBS reports OUTPUT EMPTY, but any number of the previous
buffers could be OUTPUT ERROR by now,
- the second EQBS reports OUTPUT ERROR, but any number of the previous
buffers could be OUTPUT EMPTY by now.
Effectively, this can result in both over- and underreporting of errors.
If the state reported by the second EQBS is 'HW-owned', that doesn't
guarantee that the previous buffers have not been switched to
driver-owned in the mean time. So for instance
- the second EQBS reports INPUT EMPTY, but any number of the previous
buffers could be INPUT PRIMED (or INPUT ERROR) by now.
This would result in failure to process pending work on the queue. If
it's the final check before yielding initiative, this can cause
a (temporary) queue stall due to IRQ avoidance.
Fixes:
25f269f17316 ("[S390] qdio: EQBS retry after CCQ 96")
Cc: <stable@vger.kernel.org> #v3.2+
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Williams [Mon, 2 Apr 2018 23:49:30 +0000 (16:49 -0700)]
nfit: fix region registration vs block-data-window ranges
commit
8d0d8ed3356aa9ed43b819aaedd39b08ca453007 upstream.
Commit
1cf03c00e7c1 "nfit: scrub and register regions in a workqueue"
mistakenly attempts to register a region per BLK aperture. There is
nothing to register for individual apertures as they belong as a set to
a BLK aperture group that are registered with a corresponding
DIMM-control-region. Filter them for registration to prevent some
needless devm_kzalloc() allocations.
Cc: <stable@vger.kernel.org>
Fixes:
1cf03c00e7c1 ("nfit: scrub and register regions in a workqueue")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo Handa [Fri, 6 Apr 2018 01:03:17 +0000 (10:03 +0900)]
block/loop: fix deadlock after loop_set_status
commit
1e047eaab3bb5564f25b41e9cd3a053009f4e789 upstream.
syzbot is reporting deadlocks at __blkdev_get() [1].
----------------------------------------
[ 92.493919] systemd-udevd D12696 525 1 0x00000000
[ 92.495891] Call Trace:
[ 92.501560] schedule+0x23/0x80
[ 92.502923] schedule_preempt_disabled+0x5/0x10
[ 92.504645] __mutex_lock+0x416/0x9e0
[ 92.510760] __blkdev_get+0x73/0x4f0
[ 92.512220] blkdev_get+0x12e/0x390
[ 92.518151] do_dentry_open+0x1c3/0x2f0
[ 92.519815] path_openat+0x5d9/0xdc0
[ 92.521437] do_filp_open+0x7d/0xf0
[ 92.527365] do_sys_open+0x1b8/0x250
[ 92.528831] do_syscall_64+0x6e/0x270
[ 92.530341] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 92.931922] 1 lock held by systemd-udevd/525:
[ 92.933642] #0:
00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x73/0x4f0
----------------------------------------
The reason of deadlock turned out that wait_event_interruptible() in
blk_queue_enter() got stuck with bdev->bd_mutex held at __blkdev_put()
due to q->mq_freeze_depth == 1.
----------------------------------------
[ 92.787172] a.out S12584 634 633 0x80000002
[ 92.789120] Call Trace:
[ 92.796693] schedule+0x23/0x80
[ 92.797994] blk_queue_enter+0x3cb/0x540
[ 92.803272] generic_make_request+0xf0/0x3d0
[ 92.807970] submit_bio+0x67/0x130
[ 92.810928] submit_bh_wbc+0x15e/0x190
[ 92.812461] __block_write_full_page+0x218/0x460
[ 92.815792] __writepage+0x11/0x50
[ 92.817209] write_cache_pages+0x1ae/0x3d0
[ 92.825585] generic_writepages+0x5a/0x90
[ 92.831865] do_writepages+0x43/0xd0
[ 92.836972] __filemap_fdatawrite_range+0xc1/0x100
[ 92.838788] filemap_write_and_wait+0x24/0x70
[ 92.840491] __blkdev_put+0x69/0x1e0
[ 92.841949] blkdev_close+0x16/0x20
[ 92.843418] __fput+0xda/0x1f0
[ 92.844740] task_work_run+0x87/0xb0
[ 92.846215] do_exit+0x2f5/0xba0
[ 92.850528] do_group_exit+0x34/0xb0
[ 92.852018] SyS_exit_group+0xb/0x10
[ 92.853449] do_syscall_64+0x6e/0x270
[ 92.854944] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 92.943530] 1 lock held by a.out/634:
[ 92.945105] #0:
00000000a2849e25 (&bdev->bd_mutex){+.+.}, at: __blkdev_put+0x3c/0x1e0
----------------------------------------
The reason of q->mq_freeze_depth == 1 turned out that loop_set_status()
forgot to call blk_mq_unfreeze_queue() at error paths for
info->lo_encrypt_type != NULL case.
----------------------------------------
[ 37.509497] CPU: 2 PID: 634 Comm: a.out Tainted: G W 4.16.0+ #457
[ 37.513608] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[ 37.518832] RIP: 0010:blk_freeze_queue_start+0x17/0x40
[ 37.521778] RSP: 0018:
ffffb0c2013e7c60 EFLAGS:
00010246
[ 37.524078] RAX:
0000000000000000 RBX:
ffff8b07b1519798 RCX:
0000000000000000
[ 37.527015] RDX:
0000000000000002 RSI:
ffffb0c2013e7cc0 RDI:
ffff8b07b1519798
[ 37.529934] RBP:
ffffb0c2013e7cc0 R08:
0000000000000008 R09:
47a189966239b898
[ 37.532684] R10:
dad78b99b278552f R11:
9332dca72259d5ef R12:
ffff8b07acd73678
[ 37.535452] R13:
0000000000004c04 R14:
0000000000000000 R15:
ffff8b07b841e940
[ 37.538186] FS:
00007fede33b9740(0000) GS:
ffff8b07b8e80000(0000) knlGS:
0000000000000000
[ 37.541168] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 37.543590] CR2:
00000000206fdf18 CR3:
0000000130b30006 CR4:
00000000000606e0
[ 37.546410] Call Trace:
[ 37.547902] blk_freeze_queue+0x9/0x30
[ 37.549968] loop_set_status+0x67/0x3c0 [loop]
[ 37.549975] loop_set_status64+0x3b/0x70 [loop]
[ 37.549986] lo_ioctl+0x223/0x810 [loop]
[ 37.549995] blkdev_ioctl+0x572/0x980
[ 37.550003] block_ioctl+0x34/0x40
[ 37.550006] do_vfs_ioctl+0xa7/0x6d0
[ 37.550017] ksys_ioctl+0x6b/0x80
[ 37.573076] SyS_ioctl+0x5/0x10
[ 37.574831] do_syscall_64+0x6e/0x270
[ 37.576769] entry_SYSCALL_64_after_hwframe+0x42/0xb7
----------------------------------------
[1] https://syzkaller.appspot.com/bug?id=
cd662bc3f6022c0979d01a262c318fab2ee9b56f
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <bot+48594378e9851eab70bcd6f99327c7db58c5a28a@syzkaller.appspotmail.com>
Fixes:
ecdd09597a572513 ("block/loop: fix race between I/O and set_status")
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: stable <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 17 Apr 2018 12:56:21 +0000 (14:56 +0200)]
Revert "perf tests: Decompress kernel module before objdump"
This reverts commit
7525a238be8f46617cdda29d1be5b85ffe3b042d which is
commit
94df1040b1e6aacd8dec0ba3c61d7e77cd695f26 upstream.
It breaks the build of perf on 4.9.y, so I'm dropping it.
Reported-by: Pavlos Parissis <pavlos.parissis@gmail.com>
Reported-by: Lei Chen <chenl.lei@gmail.com>
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Wed, 28 Mar 2018 17:57:22 +0000 (10:57 -0700)]
sunrpc: remove incorrect HMAC request initialization
commit
f3aefb6a7066e24bfea7fcf1b07907576de69d63 upstream.
make_checksum_hmac_md5() is allocating an HMAC transform and doing
crypto API calls in the following order:
crypto_ahash_init()
crypto_ahash_setkey()
crypto_ahash_digest()
This is wrong because it makes no sense to init() the request before a
key has been set, given that the initial state depends on the key. And
digest() is short for init() + update() + final(), so in this case
there's no need to explicitly call init() at all.
Before commit
9fa68f620041 ("crypto: hash - prevent using keyed hashes
without setting key") the extra init() had no real effect, at least for
the software HMAC implementation. (There are also hardware drivers that
implement HMAC-MD5, and it's not immediately obvious how gracefully they
handle init() before setkey().) But now the crypto API detects this
incorrect initialization and returns -ENOKEY. This is breaking NFS
mounts in some cases.
Fix it by removing the incorrect call to crypto_ahash_init().
Reported-by: Michael Young <m.a.young@durham.ac.uk>
Fixes:
9fa68f620041 ("crypto: hash - prevent using keyed hashes without setting key")
Fixes:
fffdaef2eb4a ("gss_krb5: Add support for rc4-hmac encryption")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:38 +0000 (12:11 +0100)]
arm64: Kill PSCI_GET_VERSION as a variant-2 workaround
From: Marc Zyngier <marc.zyngier@arm.com>
commit
3a0a397ff5ff8b56ca9f7908b75dee6bf0b5fabb upstream.
Now that we've standardised on SMCCC v1.1 to perform the branch
prediction invalidation, let's drop the previous band-aid.
If vendors haven't updated their firmware to do SMCCC 1.1, they
haven't updated PSCI either, so we don't loose anything.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:37 +0000 (12:11 +0100)]
arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support
From: Marc Zyngier <marc.zyngier@arm.com>
commit
b092201e0020614127f495c092e0a12d26a2116e upstream.
Add the detection and runtime code for ARM_SMCCC_ARCH_WORKAROUND_1.
It is lovely. Really.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:36 +0000 (12:11 +0100)]
arm/arm64: smccc: Implement SMCCC v1.1 inline primitive
From: Marc Zyngier <marc.zyngier@arm.com>
commit
f2d3b2e8759a5833df6f022e42df2d581e6d843c upstream.
One of the major improvement of SMCCC v1.1 is that it only clobbers
the first 4 registers, both on 32 and 64bit. This means that it
becomes very easy to provide an inline version of the SMC call
primitive, and avoid performing a function call to stash the
registers that would otherwise be clobbered by SMCCC v1.0.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:35 +0000 (12:11 +0100)]
arm/arm64: smccc: Make function identifiers an unsigned quantity
From: Marc Zyngier <marc.zyngier@arm.com>
commit
ded4c39e93f3b72968fdb79baba27f3b83dad34c upstream.
Function identifiers are a 32bit, unsigned quantity. But we never
tell so to the compiler, resulting in the following:
4ac:
b26187e0 mov x0, #0xffffffff80000001
We thus rely on the firmware narrowing it for us, which is not
always a reasonable expectation.
Cc: stable@vger.kernel.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:34 +0000 (12:11 +0100)]
firmware/psci: Expose SMCCC version through psci_ops
From: Marc Zyngier <marc.zyngier@arm.com>
commit
e78eef554a912ef6c1e0bbf97619dafbeae3339f upstream.
Since PSCI 1.0 allows the SMCCC version to be (indirectly) probed,
let's do that at boot time, and expose the version of the calling
convention as part of the psci_ops structure.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:33 +0000 (12:11 +0100)]
firmware/psci: Expose PSCI conduit
From: Marc Zyngier <marc.zyngier@arm.com>
commit
09a8d6d48499f93e2abde691f5800081cd858726 upstream.
In order to call into the firmware to apply workarounds, it is
useful to find out whether we're using HVC or SMC. Let's expose
this through the psci_ops.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:32 +0000 (12:11 +0100)]
arm64: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling
From: Marc Zyngier <marc.zyngier@arm.com>
commit
f72af90c3783d924337624659b43e2d36f1b36b4 upstream.
We want SMCCC_ARCH_WORKAROUND_1 to be fast. As fast as possible.
So let's intercept it as early as we can by testing for the
function call number as soon as we've identified a HVC call
coming from the guest.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:31 +0000 (12:11 +0100)]
arm64: KVM: Report SMCCC_ARCH_WORKAROUND_1 BP hardening support
From: Marc Zyngier <marc.zyngier@arm.com>
commit
6167ec5c9145cdf493722dfd80a5d48bafc4a18a upstream.
A new feature of SMCCC 1.1 is that it offers firmware-based CPU
workarounds. In particular, SMCCC_ARCH_WORKAROUND_1 provides
BP hardening for CVE-2017-5715.
If the host has some mitigation for this issue, report that
we deal with it using SMCCC_ARCH_WORKAROUND_1, as we apply the
host workaround on every guest exit.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: account for files moved to virt/ upstream]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:30 +0000 (12:11 +0100)]
arm/arm64: KVM: Turn kvm_psci_version into a static inline
From: Marc Zyngier <marc.zyngier@arm.com>
commit
a4097b351118e821841941a79ec77d3ce3f1c5d9 upstream.
We're about to need kvm_psci_version in HYP too. So let's turn it
into a static inline, and pass the kvm structure as a second
parameter (so that HYP can do a kern_hyp_va on it).
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: account for files moved to virt/ upstream]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:29 +0000 (12:11 +0100)]
arm64: KVM: Make PSCI_VERSION a fast path
From: Marc Zyngier <marc.zyngier@arm.com>
commit
90348689d500410ca7a55624c667f956771dce7f upstream.
For those CPUs that require PSCI to perform a BP invalidation,
going all the way to the PSCI code for not much is a waste of
precious cycles. Let's terminate that call as early as possible.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:28 +0000 (12:11 +0100)]
arm/arm64: KVM: Advertise SMCCC v1.1
From: Marc Zyngier <marc.zyngier@arm.com>
commit
09e6be12effdb33bf7210c8867bbd213b66a499e upstream.
The new SMC Calling Convention (v1.1) allows for a reduced overhead
when calling into the firmware, and provides a new feature discovery
mechanism.
Make it visible to KVM guests.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: account for files moved to virt/ upstream]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:27 +0000 (12:11 +0100)]
arm/arm64: KVM: Implement PSCI 1.0 support
From: Marc Zyngier <marc.zyngier@arm.com>
commit
58e0b2239a4d997094ba63986ef4de29ddc91d87 upstream.
PSCI 1.0 can be trivially implemented by providing the FEATURES
call on top of PSCI 0.2 and returning 1.0 as the PSCI version.
We happily ignore everything else, as they are either optional or
are clarifications that do not require any additional change.
PSCI 1.0 is now the default until we decide to add a userspace
selection API.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: account for files moved to virt/ upstream]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:26 +0000 (12:11 +0100)]
arm/arm64: KVM: Add smccc accessors to PSCI code
From: Marc Zyngier <marc.zyngier@arm.com>
commit
84684fecd7ea381824a96634a027b7719587fb77 upstream.
Instead of open coding the accesses to the various registers,
let's add explicit SMCCC accessors.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: account for files moved to virt/ upstream]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:25 +0000 (12:11 +0100)]
arm/arm64: KVM: Add PSCI_VERSION helper
From: Marc Zyngier <marc.zyngier@arm.com>
commit
d0a144f12a7ca8368933eae6583c096c363ec506 upstream.
As we're about to trigger a PSCI version explosion, it doesn't
hurt to introduce a PSCI_VERSION helper that is going to be
used everywhere.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: account for files moved to virt/ upstream]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:24 +0000 (12:11 +0100)]
arm/arm64: KVM: Consolidate the PSCI include files
From: Marc Zyngier <marc.zyngier@arm.com>
commit
1a2fb94e6a771ff94f4afa22497a4695187b820c upstream.
As we're about to update the PSCI support, and because I'm lazy,
let's move the PSCI include file to include/kvm so that both
ARM architectures can find it.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: account for files moved to virt/ upstream]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:23 +0000 (12:11 +0100)]
arm64: KVM: Increment PC after handling an SMC trap
From: Marc Zyngier <marc.zyngier@arm.com>
commit
f5115e8869e1dfafac0e414b4f1664f3a84a4683 upstream.
When handling an SMC trap, the "preferred return address" is set
to that of the SMC, and not the next PC (which is a departure from
the behaviour of an SMC that isn't trapped).
Increment PC in the handler, as the guest is otherwise forever
stuck...
Cc: stable@vger.kernel.org
Fixes:
acfb3b883f6d ("arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls")
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:22 +0000 (12:11 +0100)]
arm64: Branch predictor hardening for Cavium ThunderX2
From: Jayachandran C <jnair@caviumnetworks.com>
commit
f3d795d9b360523beca6d13ba64c2c532f601149 upstream.
Use PSCI based mitigation for speculative execution attacks targeting
the branch predictor. We use the same mechanism as the one used for
Cortex-A CPUs, we expect the PSCI version call to have a side effect
of clearing the BTBs.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:21 +0000 (12:11 +0100)]
arm64: Implement branch predictor hardening for affected Cortex-A CPUs
From: Will Deacon <will.deacon@arm.com>
commit
aa6acde65e03186b5add8151e1ffe36c3c62639b upstream.
Cortex-A57, A72, A73 and A75 are susceptible to branch predictor aliasing
and can theoretically be attacked by malicious code.
This patch implements a PSCI-based mitigation for these CPUs when available.
The call into firmware will invalidate the branch predictor state, preventing
any malicious entries from affecting other victim contexts.
Co-developed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:20 +0000 (12:11 +0100)]
arm64: cpu_errata: Allow an erratum to be match for all revisions of a core
From: Marc Zyngier <marc.zyngier@arm.com>
commit
06f1494f837da8997d670a1ba87add7963b08922 upstream.
Some minor erratum may not be fixed in further revisions of a core,
leading to a situation where the workaround needs to be updated each
time an updated core is released.
Introduce a MIDR_ALL_VERSIONS match helper that will work for all
versions of that MIDR, once and for all.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:19 +0000 (12:11 +0100)]
arm64: cputype: Add missing MIDR values for Cortex-A72 and Cortex-A75
From: Will Deacon <will.deacon@arm.com>
commit
a65d219fe5dc7887fd5ca04c2ac3e9a34feb8dfc upstream.
Hook up MIDR values for the Cortex-A72 and Cortex-A75 CPUs, since they
will soon need MIDR matches for hardening the branch predictor.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:18 +0000 (12:11 +0100)]
arm64: entry: Apply BP hardening for suspicious interrupts from EL0
From: Will Deacon <will.deacon@arm.com>
commit
30d88c0e3ace625a92eead9ca0ad94093a8f59fe upstream.
It is possible to take an IRQ from EL0 following a branch to a kernel
address in such a way that the IRQ is prioritised over the instruction
abort. Whilst an attacker would need to get the stars to align here,
it might be sufficient with enough calibration so perform BP hardening
in the rare case that we see a kernel address in the ELR when handling
an IRQ from EL0.
Reported-by: Dan Hettena <dhettena@nvidia.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:17 +0000 (12:11 +0100)]
arm64: entry: Apply BP hardening for high-priority synchronous exceptions
From: Will Deacon <will.deacon@arm.com>
commit
5dfc6ed27710c42cbc15db5c0d4475699991da0a upstream.
Software-step and PC alignment fault exceptions have higher priority than
instruction abort exceptions, so apply the BP hardening hooks there too
if the user PC appears to reside in kernel space.
Reported-by: Dan Hettena <dhettena@nvidia.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:16 +0000 (12:11 +0100)]
arm64: KVM: Use per-CPU vector when BP hardening is enabled
From: Marc Zyngier <marc.zyngier@arm.com>
commit
6840bdd73d07216ab4bc46f5a8768c37ea519038 upstream.
Now that we have per-CPU vectors, let's plug then in the KVM/arm64 code.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: account for files moved to virt/ upstream, use cpus_have_cap()]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:15 +0000 (12:11 +0100)]
mm: Introduce lm_alias
From: Laura Abbott <labbott@redhat.com>
commit
568c5fe5a54f2654f5a4c599c45b8a62ed9a2013 upstream.
Certain architectures may have the kernel image mapped separately to
alias the linear map. Introduce a macro lm_alias to translate a kernel
image symbol into its linear alias. This is used in part with work to
add CONFIG_DEBUG_VIRTUAL support for arm64.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:14 +0000 (12:11 +0100)]
arm64: Move BP hardening to check_and_switch_context
From: Marc Zyngier <marc.zyngier@arm.com>
commit
a8e4c0a919ae310944ed2c9ace11cf3ccd8a609b upstream.
We call arm64_apply_bp_hardening() from post_ttbr_update_workaround,
which has the unexpected consequence of being triggered on every
exception return to userspace when ARM64_SW_TTBR0_PAN is selected,
even if no context switch actually occured.
This is a bit suboptimal, and it would be more logical to only
invalidate the branch predictor when we actually switch to
a different mm.
In order to solve this, move the call to arm64_apply_bp_hardening()
into check_and_switch_context(), where we're guaranteed to pick
a different mm context.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:13 +0000 (12:11 +0100)]
arm64: Add skeleton to harden the branch predictor against aliasing attacks
From: Will Deacon <will.deacon@arm.com>
commit
0f15adbb2861ce6f75ccfc5a92b19eae0ef327d0 upstream.
Aliasing attacks against CPU branch predictors can allow an attacker to
redirect speculative control flow on some CPUs and potentially divulge
information from one context to another.
This patch adds initial skeleton code behind a new Kconfig option to
enable implementation-specific mitigations against these attacks for
CPUs that are affected.
Co-developed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: copy bp hardening cb via text mapping]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:12 +0000 (12:11 +0100)]
arm64: Move post_ttbr_update_workaround to C code
From: Marc Zyngier <marc.zyngier@arm.com>
commit
95e3de3590e3f2358bb13f013911bc1bfa5d3f53 upstream.
We will soon need to invoke a CPU-specific function pointer after changing
page tables, so move post_ttbr_update_workaround out into C code to make
this possible.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:11 +0000 (12:11 +0100)]
arm64: Factor out TTBR0_EL1 post-update workaround into a specific asm macro
From: Catalin Marinas <catalin.marinas@arm.com>
commit
f33bcf03e6079668da6bf4eec4a7dcf9289131d0 upstream.
This patch takes the errata workaround code out of cpu_do_switch_mm into
a dedicated post_ttbr0_update_workaround macro which will be reused in a
subsequent patch.
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:10 +0000 (12:11 +0100)]
drivers/firmware: Expose psci_get_version through psci_ops structure
From: Will Deacon <will.deacon@arm.com>
commit
d68e3ba5303f7e1099f51fdcd155f5263da8569b upstream.
Entry into recent versions of ARM Trusted Firmware will invalidate the CPU
branch predictor state in order to protect against aliasing attacks.
This patch exposes the PSCI "VERSION" function via psci_ops, so that it
can be invoked outside of the PSCI driver where necessary.
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:09 +0000 (12:11 +0100)]
arm64: cpufeature: Pass capability structure to ->enable callback
From: Will Deacon <will.deacon@arm.com>
commit
0a0d111d40fd1dc588cc590fab6b55d86ddc71d3 upstream.
In order to invoke the CPU capability ->matches callback from the ->enable
callback for applying local-CPU workarounds, we need a handle on the
capability structure.
This patch passes a pointer to the capability structure to the ->enable
callback.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:08 +0000 (12:11 +0100)]
arm64: Run enable method for errata work arounds on late CPUs
From: Suzuki K Poulose <suzuki.poulose@arm.com>
commit
55b35d070c2534dfb714b883f3c3ae05d02032da upstream.
When a CPU is brought up after we have finalised the system
wide capabilities (i.e, features and errata), we make sure the
new CPU doesn't need a new errata work around which has not been
detected already. However we don't run enable() method on the new
CPU for the errata work arounds already detected. This could
cause the new CPU running without potential work arounds.
It is upto the "enable()" method to decide if this CPU should
do something about the errata.
Fixes: commit
6a6efbb45b7d95c84 ("arm64: Verify CPU errata work arounds on hotplugged CPU")
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:07 +0000 (12:11 +0100)]
arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early
From: James Morse <james.morse@arm.com>
commit
edf298cfce47ab7279d03b5203ae2ef3a58e49db upstream.
this_cpu_has_cap() tests caps->desc not caps->matches, so it stops
walking the list when it finds a 'silent' feature, instead of
walking to the end of the list.
Prior to v4.6's
644c2ae198412 ("arm64: cpufeature: Test 'matches' pointer
to find the end of the list") we always tested desc to find the end of
a capability list. This was changed for dubious things like PAN_NOT_UAO.
v4.7's
e3661b128e53e ("arm64: Allow a capability to be checked on
single CPU") added this_cpu_has_cap() using the old desc style test.
CC: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:05 +0000 (12:11 +0100)]
arm64: uaccess: Mask __user pointers for __arch_{clear, copy_*}_user
From: Will Deacon <will.deacon@arm.com>
commit
f71c2ffcb20dd8626880747557014bb9a61eb90e upstream.
Like we've done for get_user and put_user, ensure that user pointers
are masked before invoking the underlying __arch_{clear,copy_*}_user
operations.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: fixup for v4.9-style uaccess primitives]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:04 +0000 (12:11 +0100)]
arm64: uaccess: Don't bother eliding access_ok checks in __{get, put}_user
From: Will Deacon <will.deacon@arm.com>
commit
84624087dd7e3b482b7b11c170ebc1f329b3a218 upstream.
access_ok isn't an expensive operation once the addr_limit for the current
thread has been loaded into the cache. Given that the initial access_ok
check preceding a sequence of __{get,put}_user operations will take
the brunt of the miss, we can make the __* variants identical to the
full-fat versions, which brings with it the benefits of address masking.
The likely cost in these sequences will be from toggling PAN/UAO, which
we can address later by implementing the *_unsafe versions.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:03 +0000 (12:11 +0100)]
arm64: uaccess: Prevent speculative use of the current addr_limit
From: Will Deacon <will.deacon@arm.com>
commit
c2f0ad4fc089cff81cef6a13d04b399980ecbfcc upstream.
A mispredicted conditional call to set_fs could result in the wrong
addr_limit being forwarded under speculation to a subsequent access_ok
check, potentially forming part of a spectre-v1 attack using uaccess
routines.
This patch prevents this forwarding from taking place, but putting heavy
barriers in set_fs after writing the addr_limit.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:02 +0000 (12:11 +0100)]
arm64: entry: Ensure branch through syscall table is bounded under speculation
From: Will Deacon <will.deacon@arm.com>
commit
6314d90e64936c584f300a52ef173603fb2461b5 upstream.
In a similar manner to array_index_mask_nospec, this patch introduces an
assembly macro (mask_nospec64) which can be used to bound a value under
speculation. This macro is then used to ensure that the indirect branch
through the syscall table is bounded under speculation, with out-of-range
addresses speculating as calls to sys_io_setup (0).
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: use existing scno & sc_nr definitions]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:01 +0000 (12:11 +0100)]
arm64: Use pointer masking to limit uaccess speculation
From: Robin Murphy <robin.murphy@arm.com>
commit
4d8efc2d5ee4c9ccfeb29ee8afd47a8660d0c0ce upstream.
Similarly to x86, mitigate speculation past an access_ok() check by
masking the pointer against the address limit before use.
Even if we don't expect speculative writes per se, it is plausible that
a CPU may still speculate at least as far as fetching a cache line for
writing, hence we also harden put_user() and clear_user() for peace of
mind.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:11:00 +0000 (12:11 +0100)]
arm64: Make USER_DS an inclusive limit
From: Robin Murphy <robin.murphy@arm.com>
commit
51369e398d0d33e8f524314e672b07e8cf870e79 upstream.
Currently, USER_DS represents an exclusive limit while KERNEL_DS is
inclusive. In order to do some clever trickery for speculation-safe
masking, we need them both to behave equivalently - there aren't enough
bits to make KERNEL_DS exclusive, so we have precisely one option. This
also happens to correct a longstanding false negative for a range
ending on the very top byte of kernel memory.
Mark Rutland points out that we've actually got the semantics of
addresses vs. segments muddled up in most of the places we need to
amend, so shuffle the {USER,KERNEL}_DS definitions around such that we
can correct those properly instead of just pasting "-1"s everywhere.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[v4.9: avoid dependence on TTBR0 SW PAN and THREAD_INFO_IN_TASK_STRUCT]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:10:59 +0000 (12:10 +0100)]
arm64: move TASK_* definitions to <asm/processor.h>
From: Yury Norov <ynorov@caviumnetworks.com>
commit
eef94a3d09aab437c8c254de942d8b1aa76455e2 upstream.
ILP32 series [1] introduces the dependency on <asm/is_compat.h> for
TASK_SIZE macro. Which in turn requires <asm/thread_info.h>, and
<asm/thread_info.h> include <asm/memory.h>, giving a circular dependency,
because TASK_SIZE is currently located in <asm/memory.h>.
In other architectures, TASK_SIZE is defined in <asm/processor.h>, and
moving TASK_SIZE there fixes the problem.
Discussion: https://patchwork.kernel.org/patch/
9929107/
[1] https://github.com/norov/linux/tree/ilp32-next
CC: Will Deacon <will.deacon@arm.com>
CC: Laura Abbott <labbott@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
[v4.9: necessary for making USER_DS an inclusive limit]
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:10:58 +0000 (12:10 +0100)]
arm64: Implement array_index_mask_nospec()
From: Robin Murphy <robin.murphy@arm.com>
commit
022620eed3d0bc4bf2027326f599f5ad71c2ea3f upstream.
Provide an optimised, assembly implementation of array_index_mask_nospec()
for arm64 so that the compiler is not in a position to transform the code
in ways which affect its ability to inhibit speculation (e.g. by introducing
conditional branches).
This is similar to the sequence used by x86, modulo architectural differences
in the carry/borrow flags.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com> [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Thu, 12 Apr 2018 11:10:57 +0000 (12:10 +0100)]
arm64: barrier: Add CSDB macros to control data-value prediction
From: Will Deacon <will.deacon@arm.com>
commit
669474e772b952b14f4de4845a1558fd4c0414a4 upstream.
For CPUs capable of data value prediction, CSDB waits for any outstanding
predictions to architecturally resolve before allowing speculative execution
to continue. Provide macros to expose it to the arch code.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com [v4.9 backport]
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 16 Feb 2018 15:26:57 +0000 (16:26 +0100)]
radeon: hide pointless #warning when compile testing
commit
c02216acf4177c4411d33735c81cad687790fa59 upstream.
In randconfig testing, we sometimes get this warning:
drivers/gpu/drm/radeon/radeon_object.c: In function 'radeon_bo_create':
drivers/gpu/drm/radeon/radeon_object.c:242:2: error: #warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance thanks to write-combining [-Werror=cpp]
#warning Please enable CONFIG_MTRR and CONFIG_X86_PAT for better performance \
This is rather annoying since almost all other code produces no build-time
output unless we have found a real bug. We already fixed this in the
amdgpu driver in commit
31bb90f1cd08 ("drm/amdgpu: shut up #warning for
compile testing") by adding a CONFIG_COMPILE_TEST check last year and
agreed to do the same here, but both Michel and I then forgot about it
until I came across the issue again now.
For stable kernels, as this is one of very few remaining randconfig
warnings in 4.14.
Cc: stable@vger.kernel.org
Link: https://patchwork.kernel.org/patch/9550009/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prashant Bhole [Mon, 9 Apr 2018 10:03:46 +0000 (19:03 +0900)]
perf/core: Fix use-after-free in uprobe_perf_close()
commit
621b6d2ea297d0fb6030452c5bcd221f12165fcf upstream.
A use-after-free bug was caught by KASAN while running usdt related
code (BCC project. bcc/tests/python/test_usdt2.py):
==================================================================
BUG: KASAN: use-after-free in uprobe_perf_close+0x222/0x3b0
Read of size 4 at addr
ffff880384f9b4a4 by task test_usdt2.py/870
CPU: 4 PID: 870 Comm: test_usdt2.py Tainted: G W 4.16.0-next-
20180409 #215
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
dump_stack+0xc7/0x15b
? show_regs_print_info+0x5/0x5
? printk+0x9c/0xc3
? kmsg_dump_rewind_nolock+0x6e/0x6e
? uprobe_perf_close+0x222/0x3b0
print_address_description+0x83/0x3a0
? uprobe_perf_close+0x222/0x3b0
kasan_report+0x1dd/0x460
? uprobe_perf_close+0x222/0x3b0
uprobe_perf_close+0x222/0x3b0
? probes_open+0x180/0x180
? free_filters_list+0x290/0x290
trace_uprobe_register+0x1bb/0x500
? perf_event_attach_bpf_prog+0x310/0x310
? probe_event_disable+0x4e0/0x4e0
perf_uprobe_destroy+0x63/0xd0
_free_event+0x2bc/0xbd0
? lockdep_rcu_suspicious+0x100/0x100
? ring_buffer_attach+0x550/0x550
? kvm_sched_clock_read+0x1a/0x30
? perf_event_release_kernel+0x3e4/0xc00
? __mutex_unlock_slowpath+0x12e/0x540
? wait_for_completion+0x430/0x430
? lock_downgrade+0x3c0/0x3c0
? lock_release+0x980/0x980
? do_raw_spin_trylock+0x118/0x150
? do_raw_spin_unlock+0x121/0x210
? do_raw_spin_trylock+0x150/0x150
perf_event_release_kernel+0x5d4/0xc00
? put_event+0x30/0x30
? fsnotify+0xd2d/0xea0
? sched_clock_cpu+0x18/0x1a0
? __fsnotify_update_child_dentry_flags.part.0+0x1b0/0x1b0
? pvclock_clocksource_read+0x152/0x2b0
? pvclock_read_flags+0x80/0x80
? kvm_sched_clock_read+0x1a/0x30
? sched_clock_cpu+0x18/0x1a0
? pvclock_clocksource_read+0x152/0x2b0
? locks_remove_file+0xec/0x470
? pvclock_read_flags+0x80/0x80
? fcntl_setlk+0x880/0x880
? ima_file_free+0x8d/0x390
? lockdep_rcu_suspicious+0x100/0x100
? ima_file_check+0x110/0x110
? fsnotify+0xea0/0xea0
? kvm_sched_clock_read+0x1a/0x30
? rcu_note_context_switch+0x600/0x600
perf_release+0x21/0x40
__fput+0x264/0x620
? fput+0xf0/0xf0
? do_raw_spin_unlock+0x121/0x210
? do_raw_spin_trylock+0x150/0x150
? SyS_fchdir+0x100/0x100
? fsnotify+0xea0/0xea0
task_work_run+0x14b/0x1e0
? task_work_cancel+0x1c0/0x1c0
? copy_fd_bitmaps+0x150/0x150
? vfs_read+0xe5/0x260
exit_to_usermode_loop+0x17b/0x1b0
? trace_event_raw_event_sys_exit+0x1a0/0x1a0
do_syscall_64+0x3f6/0x490
? syscall_return_slowpath+0x2c0/0x2c0
? lockdep_sys_exit+0x1f/0xaa
? syscall_return_slowpath+0x1a3/0x2c0
? lockdep_sys_exit+0x1f/0xaa
? prepare_exit_to_usermode+0x11c/0x1e0
? enter_from_user_mode+0x30/0x30
random: crng init done
? __put_user_4+0x1c/0x30
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f41d95f9340
RSP: 002b:
00007fffe71e4268 EFLAGS:
00000246 ORIG_RAX:
0000000000000003
RAX:
0000000000000000 RBX:
000000000000000d RCX:
00007f41d95f9340
RDX:
0000000000000000 RSI:
0000000000002401 RDI:
000000000000000d
RBP:
0000000000000000 R08:
00007f41ca8ff700 R09:
00007f41d996dd1f
R10:
00007fffe71e41e0 R11:
0000000000000246 R12:
00007fffe71e4330
R13:
0000000000000000 R14:
fffffffffffffffc R15:
00007fffe71e4290
Allocated by task 870:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_node+0x11a/0x430
copy_process.part.19+0x11a0/0x41c0
_do_fork+0x1be/0xa20
do_syscall_64+0x198/0x490
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Freed by task 0:
__kasan_slab_free+0x12e/0x180
kmem_cache_free+0x102/0x4d0
free_task+0xfe/0x160
__put_task_struct+0x189/0x290
delayed_put_task_struct+0x119/0x250
rcu_process_callbacks+0xa6c/0x1b60
__do_softirq+0x238/0x7ae
The buggy address belongs to the object at
ffff880384f9b480
which belongs to the cache task_struct of size 12928
It occurs because task_struct is freed before perf_event which refers
to the task and task flags are checked while teardown of the event.
perf_event_alloc() assigns task_struct to hw.target of perf_event,
but there is no reference counting for it.
As a fix we get_task_struct() in perf_event_alloc() at above mentioned
assignment and put_task_struct() in _free_event().
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
63b6da39bb38e8f1a1ef3180d32a39d6 ("perf: Fix perf_event_exit_task() race")
Link: http://lkml.kernel.org/r/20180409100346.6416-1-bhole_prashant_q7@lab.ntt.co.jp
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Wed, 7 Mar 2018 14:02:24 +0000 (16:02 +0200)]
perf intel-pt: Fix timestamp following overflow
commit
91d29b288aed3406caf7c454bf2b898c96cfd177 upstream.
timestamp_insn_cnt is used to estimate the timestamp based on the number of
instructions since the last known timestamp.
If the estimate is not accurate enough decoding might not be correctly
synchronized with side-band events causing more trace errors.
However there are always timestamps following an overflow, so the
estimate is not needed and can indeed result in more errors.
Suppress the estimate by setting timestamp_insn_cnt to zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Wed, 7 Mar 2018 14:02:23 +0000 (16:02 +0200)]
perf intel-pt: Fix error recovery from missing TIP packet
commit
1c196a6c771c47a2faa63d38d913e03284f73a16 upstream.
When a TIP packet is expected but there is a different packet, it is an
error. However the unexpected packet might be something important like a
TSC packet, so after the error, it is necessary to continue from there,
rather than the next packet. That is achieved by setting pkt_step to
zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Wed, 7 Mar 2018 14:02:22 +0000 (16:02 +0200)]
perf intel-pt: Fix sync_switch
commit
63d8e38f6ae6c36dd5b5ba0e8c112e8861532ea2 upstream.
sync_switch is a facility to synchronize decoding more closely with the
point in the kernel when the context actually switched.
The flag when sync_switch is enabled was global to the decoding, whereas
it is really specific to the CPU.
The trace data for different CPUs is put on different queues, so add
sync_switch to the intel_pt_queue structure and use that in preference
to the global setting in the intel_pt structure.
That fixes problems decoding one CPU's trace because sync_switch was
disabled on a different CPU's queue.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adrian Hunter [Wed, 7 Mar 2018 14:02:21 +0000 (16:02 +0200)]
perf intel-pt: Fix overlap detection to identify consecutive buffers correctly
commit
117db4b27bf08dba412faf3924ba55fe970c57b8 upstream.
Overlap detection was not not updating the buffer's 'consecutive' flag.
Marking buffers consecutive has the advantage that decoding begins from
the start of the buffer instead of the first PSB. Fix overlap detection
to identify consecutive buffers correctly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1520431349-30689-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Tue, 27 Mar 2018 22:01:02 +0000 (15:01 -0700)]
Drivers: hv: vmbus: do not mark HV_PCIE as perf_device
commit
238064f13d057390a8c5e1a6a80f4f0a0ec46499 upstream.
The pci-hyperv driver's channel callback hv_pci_onchannelcallback() is not
really a hot path, so we don't need to mark it as a perf_device, meaning
with this patch all HV_PCIE channels' target_cpu will be CPU0.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helge Deller [Sun, 25 Mar 2018 21:53:22 +0000 (23:53 +0200)]
parisc: Fix out of array access in match_pci_device()
commit
615b2665fd20c327b631ff1e79426775de748094 upstream.
As found by the ubsan checker, the value of the 'index' variable can be
out of range for the bc[] array:
UBSAN: Undefined behaviour in arch/parisc/kernel/drivers.c:655:21
index 6 is out of range for type 'char [6]'
Backtrace:
[<
104fa850>] __ubsan_handle_out_of_bounds+0x68/0x80
[<
1019d83c>] check_parent+0xc0/0x170
[<
1019d91c>] descend_children+0x30/0x6c
[<
1059e164>] device_for_each_child+0x60/0x98
[<
1019cd54>] parse_tree_node+0x40/0x54
[<
1019d86c>] check_parent+0xf0/0x170
[<
1019d91c>] descend_children+0x30/0x6c
[<
1059e164>] device_for_each_child+0x60/0x98
[<
1019d938>] descend_children+0x4c/0x6c
[<
1059e164>] device_for_each_child+0x60/0x98
[<
1019cd54>] parse_tree_node+0x40/0x54
[<
1019cffc>] hwpath_to_device+0xa4/0xc4
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Wed, 28 Mar 2018 17:59:22 +0000 (13:59 -0400)]
media: v4l2-compat-ioctl32: don't oops on overlay
commit
85ea29f19eab56ec16ec6b92bc67305998706afa upstream.
At put_v4l2_window32(), it tries to access kp->clips. However,
kp points to an userspace pointer. So, it should be obtained
via get_user(), otherwise it can OOPS:
vivid-000: ================== END STATUS ==================
BUG: unable to handle kernel paging request at
00000000fffb18e0
IP: [<
ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev]
PGD
3f5776067 PUD
3f576f067 PMD
3f5769067 PTE
800000042548f067
Oops: 0001 [#1] SMP
Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media]
CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ #107
Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
task:
ffff8804293f8000 ti:
ffff8803f5640000 task.ti:
ffff8803f5640000
RIP: 0010:[<
ffffffffc05468d9>] [<
ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev]
RSP: 0018:
ffff8803f5643e28 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
00000000fffb1ab4
RDX:
00000000fffb1a68 RSI:
00000000fffb18d8 RDI:
00000000fffb1aa8
RBP:
ffff8803f5643e48 R08:
0000000000000001 R09:
ffff8803f54b0378
R10:
0000000000000000 R11:
0000000000000168 R12:
00000000fffb18c0
R13:
00000000fffb1a94 R14:
00000000fffb18c8 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff880456d00000(0063) knlGS:
00000000f7100980
CS: 0010 DS: 002b ES: 002b CR0:
0000000080050033
CR2:
00000000fffb18e0 CR3:
00000003f552b000 CR4:
00000000003407e0
Stack:
00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600
ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0
ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640
Call Trace:
[<
ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev]
[<
ffffffff81301460>] ? file_has_perm+0x70/0xc0
[<
ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200
[<
ffffffff8173241a>] sysenter_dispatch+0x7/0x21
Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f
RIP [<
ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev]
RSP <
ffff8803f5643e28>
CR2:
00000000fffb18e0
Tested with vivid driver on Kernel v3.18.102.
Same bug happens upstream too:
BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev]
Read of size 8 at addr
00000000ffe48400 by task v4l2-compliance/8713
CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ #108
Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
Call Trace:
dump_stack+0x5c/0x7c
kasan_report+0x164/0x380
? __put_v4l2_format32+0x98/0x4d0 [videodev]
__put_v4l2_format32+0x98/0x4d0 [videodev]
v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev]
? __fsnotify_inode_delete+0x20/0x20
? __put_v4l2_format32+0x4d0/0x4d0 [videodev]
compat_SyS_ioctl+0x646/0x14d0
? do_ioctl+0x30/0x30
do_fast_syscall_32+0x191/0x3f4
entry_SYSENTER_compat+0x6b/0x7a
==================================================================
Disabling lock debugging due to kernel taint
BUG: unable to handle kernel paging request at
00000000ffe48400
IP: __put_v4l2_format32+0x98/0x4d0 [videodev]
PGD
3a22fb067 P4D
3a22fb067 PUD
39b6f0067 PMD
39b6f1067 PTE
80000003256af067
Oops: 0001 [#1] SMP KASAN
Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf
drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel
CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ #108
Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017
RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev]
RSP: 0018:
ffff8803b9be7d30 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
ffff8803ac983e80 RCX:
ffffffff8cd929f2
RDX:
1ffffffff1d0a149 RSI:
0000000000000297 RDI:
0000000000000297
RBP:
00000000ffe485c0 R08:
fffffbfff1cf5123 R09:
ffffffff8e7a8948
R10:
0000000000000001 R11:
fffffbfff1cf5122 R12:
00000000ffe483e0
R13:
00000000ffe485c4 R14:
ffff8803ac985918 R15:
00000000ffe483e8
FS:
0000000000000000(0000) GS:
ffff880407400000(0063) knlGS:
00000000f7a46980
CS: 0010 DS: 002b ES: 002b CR0:
0000000080050033
CR2:
00000000ffe48400 CR3:
00000003a83f2003 CR4:
00000000003606f0
Call Trace:
v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev]
? __fsnotify_inode_delete+0x20/0x20
? __put_v4l2_format32+0x4d0/0x4d0 [videodev]
compat_SyS_ioctl+0x646/0x14d0
? do_ioctl+0x30/0x30
do_fast_syscall_32+0x191/0x3f4
entry_SYSENTER_compat+0x6b/0x7a
Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc
RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP:
ffff8803b9be7d30
CR2:
00000000ffe48400
cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 13 Apr 2018 17:48:37 +0000 (19:48 +0200)]
Linux 4.9.94
Greg Hackmann [Fri, 13 Apr 2018 00:29:51 +0000 (17:29 -0700)]
Revert "xhci: plat: Register shutdown for xhci_plat"
Pixel 2 field testers reported that when they tried to reboot their
phones with some USB devices plugged in, the reboot would get wedged and
eventually trigger watchdog reset. Once the Pixel kernel team found a
reliable repro case, they narrowed it down to this commit's 4.4.y
backport. Reverting the change made the issue go away.
This reverts commit
b07c12517f2aed0add8ce18146bb426b14099392.
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Thu, 29 Mar 2018 19:49:52 +0000 (12:49 -0700)]
vrf: Fix use after free and double free in vrf_finish_output
commit
82dd0d2a9a76fc8fa2b18d80b987d455728bf83a upstream.
Miguel reported an skb use after free / double free in vrf_finish_output
when neigh_output returns an error. The vrf driver should return after
the call to neigh_output as it takes over the skb on error path as well.
Patch is a simplified version of Miguel's patch which was written for 4.9,
and updated to top of tree.
Fixes:
8f58336d3f78a ("net: Add ethernet header for pass through VRF device")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ backport to 4.4 and 4.9 dropped the sock_confirm_neigh and
changed neigh_output to dst_neigh_output ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Craig Dillabaugh [Mon, 26 Mar 2018 18:58:32 +0000 (14:58 -0400)]
net sched actions: fix dumping which requires several messages to user space
[ Upstream commit
734549eb550c0c720bc89e50501f1b1e98cdd841 ]
Fixes a bug in the tcf_dump_walker function that can cause some actions
to not be reported when dumping a large number of actions. This issue
became more aggrevated when cookies feature was added. In particular
this issue is manifest when large cookie values are assigned to the
actions and when enough actions are created that the resulting table
must be dumped in multiple batches.
The number of actions returned in each batch is limited by the total
number of actions and the memory buffer size. With small cookies
the numeric limit is reached before the buffer size limit, which avoids
the code path triggering this bug. When large cookies are used buffer
fills before the numeric limit, and the erroneous code path is hit.
For example after creating 32 csum actions with the cookie
aaaabbbbccccdddd
$ tc actions ls action csum
total acts 26
action order 0: csum (tcp) action continue
index 1 ref 1 bind 0
cookie
aaaabbbbccccdddd
.....
action order 25: csum (tcp) action continue
index 26 ref 1 bind 0
cookie
aaaabbbbccccdddd
total acts 6
action order 0: csum (tcp) action continue
index 28 ref 1 bind 0
cookie
aaaabbbbccccdddd
......
action order 5: csum (tcp) action continue
index 32 ref 1 bind 0
cookie
aaaabbbbccccdddd
Note that the action with index 27 is omitted from the report.
Fixes:
4b3550ef530c ("[NET_SCHED]: Use nla_nest_start/nla_nest_end")"
Signed-off-by: Craig Dillabaugh <cdillaba@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>