Richard Purdie [Thu, 3 Nov 2005 11:36:45 +0000 (11:36 +0000)]
[MTD] NAND sharpsl.c: Add support for akita and borzoi models
The Sharp Zaurus akita and borzoi models are large page flash devices.
This patch adds support for them to the sharpsl MTD NAND driver but
keeps the oob layout and bad block positions compatible with the Sharp
Zaurus 2.4 kernel and ROM bootloader.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Nicolas Pitre [Tue, 25 Oct 2005 20:28:43 +0000 (21:28 +0100)]
[MTD] chips/cfi_cmdset_0001: fix for P30 cfi parsing
Change to the extended cfi table parsing for Intel NOR flash that uses
the info in the extended table to 'walk' the table rather than using
hard coding for various primary extended query table version numbers.
From: Jared Hulbert <jaredeh@gmail.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Mon, 24 Oct 2005 16:22:36 +0000 (17:22 +0100)]
[JFFS2] Fix broken compile when debug level = 2
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ben Dooks [Thu, 20 Oct 2005 21:22:58 +0000 (22:22 +0100)]
[MTD] NAND s3c2410.c: Fix timing calculation bugs
Spotted by basprog@mail.ru
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Todd Poynor [Tue, 18 Oct 2005 23:29:38 +0000 (00:29 +0100)]
[JFFS2] Return 0, not number of bytes written, for success at commit_write
Some callers to block-layer commit_write function treat non-zero return as
error, notably the loopback mount driver sometimes used in conjunction with
JFFS2 on NAND flash for bad block avoidance, etc. Return zero for success
as do various other commit_write functions.
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Nicolas Pitre [Mon, 17 Oct 2005 21:03:19 +0000 (22:03 +0100)]
[MTD] Don't let gcc inline functions marked __xipram
If they get inlined into non __xipram functions we're screwed.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ben Dooks [Mon, 10 Oct 2005 10:27:05 +0000 (11:27 +0100)]
[MTD] NAND s3c2410.c: Fix missing dev parameter to dev_err
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ben Dooks [Mon, 10 Oct 2005 00:51:30 +0000 (01:51 +0100)]
[MTD] maps/plat-ram.c: Initialize owner in device_driver struct
Added .owner initialisation to allow the
tracking of the device_driver owners when
built as a module
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ben Dooks [Mon, 10 Oct 2005 00:13:41 +0000 (01:13 +0100)]
[MTD] maps/bast-flash.c: Initialize owner in device_driver struct
Added owner to device driver field for tracking
when loaded as a module.
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ben Dooks [Mon, 10 Oct 2005 00:09:19 +0000 (01:09 +0100)]
[MTD] NAND: s3c2410.c Initialize owner in device_driver struct
Added owner fields to the device_driver for tracking
ownership when built as a module
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Fri, 30 Sep 2005 14:49:12 +0000 (15:49 +0100)]
[MTD] mtdpart.c: Allow eraseblock size != power of 2
Don't assume eraseblock size is power of 2.
Dataflash can have aligned eraseblock size.
From: Peter Menzebach <pm-mtd@mw-itcon.de>
Acked-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Fri, 30 Sep 2005 13:59:17 +0000 (14:59 +0100)]
[JFFS2] Fix dataflash support
- assume wbuf may be of size which is not power of 2
- don't make strange assumption about not padding wbuf for DataFlash
- use wbuf = DataFlash page and eraseblock >= 8 Dataflash pages
From: Peter Menzebach <pm-mtd@mw-itcon.de>
Acked-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Thu, 29 Sep 2005 03:53:16 +0000 (04:53 +0100)]
[MTD] OneNAND: Enhanced support for DDP (Dual Densitiy Packages)
Add density mask for better support of DDP chips.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Thu, 29 Sep 2005 02:55:31 +0000 (03:55 +0100)]
[MTD] OneNAND: Power Management (PM) support
Add suspend/resume
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Tue, 27 Sep 2005 13:40:52 +0000 (14:40 +0100)]
[JFFS2] Use memset(struct) instead of nulling struct members one by one
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Tue, 27 Sep 2005 13:17:32 +0000 (14:17 +0100)]
[JFFS2] Remove stale comment
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Tue, 27 Sep 2005 10:26:39 +0000 (11:26 +0100)]
[MTD] OneNAND: Add missing files
Simple bad block table source and header files
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ben Dooks [Mon, 26 Sep 2005 21:42:57 +0000 (22:42 +0100)]
[MTD] NAND: s3c2410 use dev_err() to report errors instead of printk()
Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ferenc Havasi [Mon, 26 Sep 2005 11:37:25 +0000 (12:37 +0100)]
[JFFS2] Rename jffs2_summary_node to jffs2_raw_summary
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pete Popov [Fri, 23 Sep 2005 01:44:58 +0000 (02:44 +0100)]
[MTD] NAND: Alchemy board driver cleanup
- cleaned up the partitions and include files
- added more flexible CS and address detection and setup
Regression tested on db1200 and db1550.
Signed-off-by: Pete Popov <ppopov@pacbell.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Thu, 22 Sep 2005 11:25:00 +0000 (12:25 +0100)]
[JFFS2] Debug code simplification, update TODO
Simplify the debugging code further.
Update the TODO list
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Joern Engel [Sun, 18 Sep 2005 10:46:45 +0000 (11:46 +0100)]
[MTD] maps: Add support for MTX-1 Flash device
Add support for "4G Systems MTX-1 Flash device", better known as meshcube.
From: Bruno Randolf <bruno.randolf@4g-systems.biz>
Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ferenc Havasi [Fri, 16 Sep 2005 12:58:20 +0000 (13:58 +0100)]
[JFFS2] Account summary space in reserved_size.
Always keep valid data in reserved_size.
It did not cause problems, but the reservation code was unoptimal
when centralized summary was active or the size of the erase block
was very small.
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Vitaly Wool [Thu, 15 Sep 2005 13:58:53 +0000 (14:58 +0100)]
[MTD] NAND: Add suspend/resume functionality
The changes introduced allow to suspend/resume NAND flash.
A new state (FL_PM_SUSPENDED) is introduced, as well as
routines for mtd->suspend and mtd->resume to put the flash in
suspended state from software pov.
Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Todd Poynor [Wed, 14 Sep 2005 19:14:17 +0000 (20:14 +0100)]
[MTD] maps: Add mapping driver for PQ2FADS boards.
From: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Wed, 14 Sep 2005 16:57:35 +0000 (17:57 +0100)]
[JFFS2] Debug message format clean up
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ferenc Havasi [Fri, 9 Sep 2005 15:12:01 +0000 (16:12 +0100)]
[JFFS2] Call summary collector for all mtd devices with writev support
Do the summary collection in the right place. If the device
was not writebuffered but had c->mtd->writev function
(e.g. blkmtd) the summary collector function was not called.
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Fri, 9 Sep 2005 06:43:16 +0000 (07:43 +0100)]
OneNAND: Remove OMAP platform driver
Now we can use the generic platform driver
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Fri, 9 Sep 2005 06:39:50 +0000 (07:39 +0100)]
[MTD] OneNAND: Add generic platform driver
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
David Vrabel [Thu, 8 Sep 2005 10:32:23 +0000 (11:32 +0100)]
[MTD] maps/ixp4xx: remove platform specific bits
- Intel chip driver has a reboot notifier so no need to reset the chip here.
- Don't play with chip selects (platform code should do this if necessary).
Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ferenc Havasi [Wed, 7 Sep 2005 11:22:01 +0000 (12:22 +0100)]
[JFFS2] Return real jffs2_sum_init() error code
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ferenc Havasi [Wed, 7 Sep 2005 08:35:26 +0000 (09:35 +0100)]
[JFFS2] Add erase block summary support (mount time improvement)
The goal of summary is to speed up the mount time. Erase block summary (EBS)
stores summary information at the end of every (closed) erase block. It is
no longer necessary to scan all nodes separetly (and read all pages of them)
just read this "small" summary, where every information is stored which is
needed at mount time.
This summary information is stored in a JFFS2_FEATURE_RWCOMPAT_DELETE. During
the mount process if there is no summary info the orignal scan process will
be executed. EBS works with NAND and NOR flashes, too.
There is a user space tool called sumtool to generate this summary
information for a JFFS2 image.
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Sat, 3 Sep 2005 06:37:19 +0000 (07:37 +0100)]
[MTD] OneNAND: Remove experimental Kconfig dependency
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Sat, 3 Sep 2005 06:36:21 +0000 (07:36 +0100)]
[PATCH] OneNAND: Fix bug in write verify
- Remove unused block, page parameters
- Add constant instead of runtime value
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Sat, 3 Sep 2005 06:32:30 +0000 (07:32 +0100)]
[PATCH] OneNAND: Add simulator
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Sat, 3 Sep 2005 06:20:08 +0000 (07:20 +0100)]
[PATCH] OneNAND: Update OMAP OneNAND mapping using device driver model
- Update OMAP OneNAND mapping file using device driver model
- Remove board specific macro and values.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Sat, 3 Sep 2005 06:15:48 +0000 (07:15 +0100)]
[PATCH] OneNAND: Simple Bad Block handling support
Based on NAND memory bad block table code
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Sat, 3 Sep 2005 06:07:19 +0000 (07:07 +0100)]
[PATCH] OneNAND: Sync. Burst Read support
Add OneNAND Sync. Burst Read support
Tested with OMAP platform
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kyungmin Park [Mon, 11 Jul 2005 10:41:53 +0000 (11:41 +0100)]
[MTD] Add initial support for OneNAND flash chips
OneNAND is a new flash technology from Samsung with integrated SRAM
buffers and logic interface.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ferenc Havasi [Wed, 31 Aug 2005 13:51:04 +0000 (14:51 +0100)]
[JFFS2] Remove support for virtual blocks
Remove support for virtual blocks, which are build by
concatenation of multiple physical erase blocks.
For more information please read the MTD mailing list thread
"[PATCH] remove support for virtual blocks"
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Mon, 22 Aug 2005 09:07:12 +0000 (10:07 +0100)]
[JFFS2] Solve BUG caused by frag->node representing a hole in fragtree
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Wed, 17 Aug 2005 14:57:43 +0000 (15:57 +0100)]
[JFFS2] Calculate CRC check starting point correctly
When data starts from the beginning of NAND page, 'len' must be zero, not
c->wbuf_page.
Thanks to Zoltan Sogor for reporting this problem.
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Wed, 17 Aug 2005 14:13:48 +0000 (15:13 +0100)]
[JFFS2] More message formatting cleanups
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Wed, 17 Aug 2005 13:46:26 +0000 (14:46 +0100)]
[JFFS2] Fix JFFS2 [mc]time handling
From: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Wed, 17 Aug 2005 13:42:09 +0000 (14:42 +0100)]
[JFFS2] Make the JFFS2 messages a bit nicer
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 11 Aug 2005 17:13:46 +0000 (18:13 +0100)]
[MTD] NAND: Use correct mask for OOB size calculation
The bit mask used for oob size calculation was using 2 bits instead
of one. Fortunately the next bit has been 0 all the time.
Thanks to Nathan H. for pointing this out
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Thu, 11 Aug 2005 17:13:46 +0000 (18:13 +0100)]
[MTD] Remove deprecated power management functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
David Woodhouse [Mon, 8 Aug 2005 08:56:22 +0000 (09:56 +0100)]
[MTD] Missing check on kmalloc return in INFTL mount.
Signed-off-by: Youssef Hmamouche <hyoussef@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Nicolas Pitre [Sat, 6 Aug 2005 04:51:33 +0000 (05:51 +0100)]
[JFFS2] Teach JFFS2 about Sibley flash
Intels Sibley flash needs JFFS2 write buffer functionality
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Nicolas Pitre [Sat, 6 Aug 2005 04:46:59 +0000 (05:46 +0100)]
[MTD] writev support for cfi-cmdset-0001
While this might be useful for all supported flash types, it is mandatory
for proper JFFS2 support with Sibley flash.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Nicolas Pitre [Sat, 6 Aug 2005 04:40:46 +0000 (05:40 +0100)]
{MTD] add support for Intel's "Sibley" flash
This updates the Primary Vendor-Specific Extended Query parsing to
version 1.4 in order to get the information about the Configurable
Programming Mode regions implemented in the Sibley flash, as well as
selecting the appropriate write command code.
This flash does not behave like traditional NOR flash when writing data.
While mtdblock should just work, further changes are needed for JFFS2 use.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Nicolas Pitre [Sat, 6 Aug 2005 04:16:52 +0000 (05:16 +0100)]
[MTD] cleanups to cfi_cmdset_0001
This includes improved error handling/reporting plus some other
message cleanups.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sean Young [Thu, 16 Jun 2005 08:49:33 +0000 (09:49 +0100)]
[MTD] Add Resident Flash Disk (RFD) support
This type of flash translation layer (FTL) is used by the Embedded BIOS
by General Software. It is known as the Resident Flash Disk (RFD), see:
http://www.gensw.com/pages/prod/bios/rfd.htm
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Fri, 5 Aug 2005 11:43:47 +0000 (12:43 +0100)]
[JFFS2] Debug code clean up - step 7
Remove more noisy debugs. Add current->pid to debug messages.
Remove bogus includes.
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Thu, 4 Aug 2005 11:40:02 +0000 (12:40 +0100)]
[JFFS2] Correct buggy length checks
The previous changes introduced wrong length calculations.
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Wed, 3 Aug 2005 09:26:50 +0000 (10:26 +0100)]
[JFFS2] Debug code clean up - step 6
Remove extra noisy debugs
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Mon, 1 Aug 2005 12:05:22 +0000 (13:05 +0100)]
[JFFS2] Build fragtree in reverse order
Instead of building fragtree starting from node with the smallest version
number, start from the highest. This helps to avoid reading and checking
obsolete nodes.
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Sun, 31 Jul 2005 09:08:41 +0000 (10:08 +0100)]
[JFFS2] Refine fragtree debug macros
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Sun, 31 Jul 2005 08:20:48 +0000 (09:20 +0100)]
[JFFS2] Move another fragtree-related function to nodelist.c
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Andrew Lunn [Sat, 30 Jul 2005 15:29:30 +0000 (16:29 +0100)]
[JFFS2] Fix up new debug code for eCos build
The debug code cleanup broke the eCos build.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Thu, 28 Jul 2005 14:46:43 +0000 (15:46 +0100)]
[JFFS2] Debug code clean up - step 5
Replace the D1(printk()) style debugging with the new debug macros
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Wed, 27 Jul 2005 14:46:14 +0000 (15:46 +0100)]
[JFFS2] Move scattered function into related files
Move functions to read inodes into readinode.c
Move functions to handle fragtree and dentry lists into nodelist.[ch]
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Wed, 27 Jul 2005 14:16:57 +0000 (15:16 +0100)]
[JFFS2] Debug code clean up - step 4
Small comment cleanups. Remove a unused macro
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ferenc Havasi [Tue, 26 Jul 2005 13:24:43 +0000 (14:24 +0100)]
[jffs2] Remove compressor lzo and lzari
Remove unused compressor code
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Sun, 24 Jul 2005 15:29:59 +0000 (16:29 +0100)]
[JFFS2] Namespace clean up
Rename functions to a name matching the functionality.
Remove stall debug code
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Sun, 24 Jul 2005 15:14:17 +0000 (16:14 +0100)]
[JFFS2] Debug code clean up - step 3
Various simplifiactions. printk format corrections.
Convert more code to use the new debug functions.
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Mon, 18 Jul 2005 11:21:23 +0000 (12:21 +0100)]
[JFFS2] Fix slab panic
When JFFS22 is unable to read the root inode, the bad root inode object is not
freed and remains sticked in the jffs2_i slab cache. When we further try to
free the slab cache (e.g., on rmmod jffs2), slab allocator subsystem panics.
Fix this bug.
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Sun, 17 Jul 2005 12:01:46 +0000 (13:01 +0100)]
[JFFS2] Debug code clean up - step 2
If debugging is disabled, define debugging functions as empty macros, instead
of using Dx() explicitly.
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Sun, 17 Jul 2005 11:13:51 +0000 (12:13 +0100)]
[JFFS2] Use f->target instead of f->dents for symlink target
JFFS2 uses f->dents to store the pointer to the symlink target string (in case
the inode is symlink). This is somewhat ugly to use the same field for
different reasons. Introduce distinct field f->target for this purpose.
Note, f->fragtree, f->dents, f->target may probably be put in a union.
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Sun, 17 Jul 2005 06:56:26 +0000 (07:56 +0100)]
[JFFS2] Debug code clean up - step 1
Move debug functions into a seperate source file
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Artem B. Bityutskiy [Fri, 15 Jul 2005 10:13:57 +0000 (11:13 +0100)]
[JFFS2] Split a large routine on several smaller.
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Thomas Gleixner [Sun, 6 Nov 2005 14:36:37 +0000 (15:36 +0100)]
Merge branch 'master' of /home/tglx/work/mtd/git/linux-2.6.git/
Calin A. Culianu [Sat, 5 Nov 2005 01:38:04 +0000 (20:38 -0500)]
[PATCH] nvidiafb: Geforce 7800 series support added
This adds support for the Nvidia Geforce 7800 series of cards to the
nvidiafb framebuffer driver. All it does is add the PCI device id for
the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device
table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work
on these cards.
I also added the relevant PCI device ids to linux/pci_ids.h
I tested it on my 7800 GTX here and it works like a charm. I now can
get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text
mode to make your eyes BLEED. ;)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Sat, 5 Nov 2005 00:32:36 +0000 (16:32 -0800)]
Merge branch 'srp' of /linux/kernel/git/roland/infiniband
Linus Torvalds [Sat, 5 Nov 2005 00:31:54 +0000 (16:31 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband
Linus Torvalds [Sat, 5 Nov 2005 00:27:50 +0000 (16:27 -0800)]
Merge /linux/kernel/git/paulus/powerpc-merge
Paul Mackerras [Fri, 4 Nov 2005 23:36:59 +0000 (10:36 +1100)]
powerpc: Fix vmlinux.lds.S for 32-bit
We can't currently use asm-ppc/page.h in vmlinux.lds.S, so until
we have a merged page.h, define PAGE_SIZE and KERNELBASE locally.
Also gets rid of some dynamic executable cruft that we had for
32-bit. With -Ttext=$(KERNELBASE) this didn't cause any problem,
but when we changed to putting . = KERNELBASE in the vmlinux.lds.S
this cruft caused the text to get linked at 0xa0 instead of
0xc0000000. Oops.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Paul Mackerras [Fri, 4 Nov 2005 23:33:55 +0000 (10:33 +1100)]
powerpc: Merge smp.c and smp.h
This also moves setup_cpu_maps to setup-common.c (calling it
smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Chuck Lever [Tue, 1 Nov 2005 21:53:32 +0000 (16:53 -0500)]
NFS,SUNRPC,NLM: fix unused variable warnings when CONFIG_SYSCTL is disabled
Fix some dprintk's so that NLM, NFS client, and RPC client compile
cleanly if CONFIG_SYSCTL is disabled.
Test plan:
Compile kernel with CONFIG_NFS enabled and CONFIG_SYSCTL disabled.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Chuck Lever [Tue, 1 Nov 2005 17:24:48 +0000 (12:24 -0500)]
SUNRPC: allow sunrpc.o to link when CONFIG_SYSCTL is disabled
The sunrpc module should build properly even when CONFIG_SYSCTL is
disabled.
Reported by Jan-Benedict Glaw.
Test plan:
Compile kernel with CONFIG_NFS as a module and built-in, and CONFIG_SYSCTL
enabled and disabled.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:39:36 +0000 (15:39 -0500)]
NFSv4: Teach NFSv4 to cache locks when we hold a delegation
Now that we have a method of dealing with delegation recalls, actually
enable the caching of posix and BSD locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:38:11 +0000 (15:38 -0500)]
NFSv4: Recover locks too when returning a delegation
Delegations allow us to cache posix and BSD locks, however when the
delegation is recalled, we need to "flush the cache" and send
the cached LOCK requests to the server.
This patch sets up the mechanism for doing so.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:35:30 +0000 (15:35 -0500)]
NFSv4: Fix recovery of flock() locks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:35:02 +0000 (15:35 -0500)]
NFSv4: Return any delegations before sillyrenaming the file
I missed this one... Any form of rename will result in a delegation
recall, so it is more efficient to return the one we hold before
trying the rename.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:33:50 +0000 (15:33 -0500)]
NFSv4: Fix the handling of the error NFS4ERR_OLD_STATEID
Ensure that we retry the failed operation...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:33:38 +0000 (15:33 -0500)]
NFSv4: Fix problem with OPEN_DOWNGRADE
RFC 3530 states that for OPEN_DOWNGRADE "The share_access and share_deny
bits specified must be exactly equal to the union of the share_access and
share_deny bits specified for some subset of the OPENs in effect for
current openowner on the current file.
Setattr is currently violating the NFSv4 rules for OPEN_DOWNGRADE in that
it may cause a downgrade from OPEN4_SHARE_ACCESS_BOTH to
OPEN4_SHARE_ACCESS_WRITE despite the fact that there exists no open file
with O_WRONLY access mode.
Fix the problem by replacing nfs4_find_state() with a modified version of
nfs_find_open_context().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Trond Myklebust [Fri, 4 Nov 2005 20:32:58 +0000 (15:32 -0500)]
NFSv4: Fix a race between open() and close()
We must not remove the nfs4_state structure from the inode open lists
before we are in sequence lock.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
David S. Miller [Fri, 4 Nov 2005 19:17:24 +0000 (11:17 -0800)]
[USB]: Make early handoff a final fixup instead of a header one.
At header fixup time, it is not yet legal to ioremap() PCI
device registers, yet that is what this quirk code needs to
do.
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleg Nesterov [Fri, 4 Nov 2005 15:54:30 +0000 (18:54 +0300)]
[PATCH] improve scheduler fairness a bit
Do not transfer remaining time slice to another cpu on process exit.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Fri, 4 Nov 2005 18:42:53 +0000 (10:42 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Fri, 4 Nov 2005 18:40:11 +0000 (10:40 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Fri, 4 Nov 2005 18:39:28 +0000 (10:39 -0800)]
Merge /pub/scm/linux/kernel/git/acme/net-2.6
Russell King [Fri, 4 Nov 2005 17:28:34 +0000 (17:28 +0000)]
[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfrom
No longer maintained
Russell King [Fri, 4 Nov 2005 17:26:57 +0000 (17:26 +0000)]
[PATCH] ARM: Reverted 2921/1: Support for the RTC / nvram on the Comdial MP1000
No longer maintained
Russell King [Fri, 4 Nov 2005 17:26:56 +0000 (17:26 +0000)]
[PATCH] ARM: Reverted 2919/1: CS8900A ethernet driver modifications for the Comdial MP1000
No longer maintained
Nicolas Pitre [Fri, 4 Nov 2005 17:17:30 +0000 (17:17 +0000)]
[ARM] 3097/1: change library link ordering
Patch from Nicolas Pitre
We have an optimized sha1 routine (arch/arm/lib/sha1.S) meant to
override the generic one in lib/sha1.c.
Unfortunately lib/lib.a is listed _before_ arch/arm/lib/lib.a in the
link argument list and therefore the architecture specific lib functions
are not picked up before the generic versions.
This patch is a quick fix to change that ordering for ARM. Here's what
the kbuild maintainer had to say about it (was also CC'd on lkml):
On Wed, 2 Nov 2005, Sam Ravnborg wrote:
> This looks like an obvious way to achive correct ordering.
> We could change it so arch defines always took precedence but
> the above is so simple that it is not worth the effort.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Todd Poynor [Fri, 4 Nov 2005 17:15:45 +0000 (17:15 +0000)]
[ARM] 3087/1: PXA2xx flash platform device conversion
Patch from Todd Poynor
Add platform devices for flash to Lubbock and Mainstone board files.
Once in place, the two existing mtd map drivers for the boards will be
converted to use a single pxa2xx map driver in the linux-mtd tree.
Take 4: flash_platform_data .map_name vs. .name cleaned up, resync with
merged irda patch context.
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Dave Jiang [Fri, 4 Nov 2005 17:15:44 +0000 (17:15 +0000)]
[ARM] 3086/1: ixp2xxx error irq handling
Patch from Dave Jiang
This provides support for IXP2xxx error interrupt handling. Previously there was a patch to remove this (although the original stuff was broken). Well, now the error bits are needed again. These are used extensively by the micro-engine drivers according to Deepak and also we will need it for the new EDAC code that Alan Cox is trying to push into the main kernel.
Re-submit of 3072/1, generated against git tree pulled today. AFAICT, this git tree pulled in all the ARM changes that's in arm.diff. Please let me know if there are additional changes. Thx!
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nicolas Pitre [Fri, 4 Nov 2005 17:15:43 +0000 (17:15 +0000)]
[ARM] 3094/1: remove PLD stuff from old uaccess code
Patch from Nicolas Pitre
ARM processors that have pld instructions are not using those copy_user
implementation anymore. Let's remove the useless PLD lines which were
half wrong anyway.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Paul Mackerras [Fri, 4 Nov 2005 06:03:39 +0000 (17:03 +1100)]
Merge git://oak/home/sfr/kernels/iseries/work
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / log