GitHub/moto-9609/android_kernel_motorola_exynos9610.git
18 years ago[MIPS] IP22: Remove SYS_SUPPORTS_SMP test code.
Ralf Baechle [Thu, 6 Jul 2006 08:47:52 +0000 (09:47 +0100)]
[MIPS] IP22: Remove SYS_SUPPORTS_SMP test code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Panic on fp exception in kernel mode.
Chris Dearman [Fri, 30 Jun 2006 22:35:28 +0000 (23:35 +0100)]
[MIPS] Panic on fp exception in kernel mode.

There should never be a FP exception in kernel mode.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Malta: Fix build of certain configs.
Ralf Baechle [Mon, 3 Jul 2006 16:02:35 +0000 (17:02 +0100)]
[MIPS] Malta: Fix build of certain configs.

18 years ago[MIPS] au1xxx: Support both YAMON and U-Boot
Domen Puncer [Mon, 3 Jul 2006 06:17:09 +0000 (08:17 +0200)]
[MIPS] au1xxx: Support both YAMON and U-Boot

Signed-off-by: Domen Puncer <domen.puncer@ultra.si>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Save 2k text size in cpu-probe
Thiemo Seufer [Mon, 3 Jul 2006 12:30:01 +0000 (13:30 +0100)]
[MIPS] Save 2k text size in cpu-probe

The appended patch drops the inline for decode_configs, this saves about
2k of text size.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Uses MIPS_CONF_AR instead of magic constants.
Thiemo Seufer [Mon, 3 Jul 2006 12:30:01 +0000 (13:30 +0100)]
[MIPS] Uses MIPS_CONF_AR instead of magic constants.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Make SPARSEMEM selectable on QEMU.
Atsushi Nemoto [Sun, 2 Jul 2006 15:09:47 +0000 (00:09 +0900)]
[MIPS] Make SPARSEMEM selectable on QEMU.

This might be helpfull to debug sparsemem on mips.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Make SPARSEMEM selectable on QEMU.
Atsushi Nemoto [Sun, 2 Jul 2006 15:09:47 +0000 (00:09 +0900)]
[MIPS] Make SPARSEMEM selectable on QEMU.

This might be helpfull to debug sparsemem on mips.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Au1000: Remove au1000 code.
Yoichi Yuasa [Sun, 2 Jul 2006 14:17:27 +0000 (23:17 +0900)]
[MIPS] Au1000: Remove au1000 code.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] vr41xx: Removed unused definitions for NEC CMBVR4133.
Yoichi Yuasa [Sun, 2 Jul 2006 14:13:34 +0000 (23:13 +0900)]
[MIPS] vr41xx: Removed unused definitions for NEC CMBVR4133.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Wire up vmsplice(2) and move_pages(2).
Ralf Baechle [Sun, 2 Jul 2006 15:31:14 +0000 (16:31 +0100)]
[MIPS] Wire up vmsplice(2) and move_pages(2).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Eleminate interrupt migration helper use.
Ralf Baechle [Sun, 2 Jul 2006 13:41:42 +0000 (14:41 +0100)]
[MIPS] Eleminate interrupt migration helper use.

> #define hw_interrupt_type       irq_chip
> typedef struct irq_chip         hw_irq_controller;
> #define no_irq_type             no_irq_chip
> typedef struct irq_desc         irq_desc_t;

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Don't include obsolete <linux/config.h>.
Ralf Baechle [Sat, 1 Jul 2006 21:07:23 +0000 (22:07 +0100)]
[MIPS] Don't include obsolete <linux/config.h>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Default cpu_has_mipsmt to a runtime check
Chris Dearman [Fri, 30 Jun 2006 11:32:37 +0000 (12:32 +0100)]
[MIPS] Default cpu_has_mipsmt to a runtime check

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Use KERN_DEBUG to log the SDBBP messages
Chris Dearman [Fri, 30 Jun 2006 11:32:37 +0000 (12:32 +0100)]
[MIPS] Use KERN_DEBUG to log the SDBBP messages

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Less noise on multithreading exceptions.
Chris Dearman [Fri, 30 Jun 2006 13:19:45 +0000 (14:19 +0100)]
[MIPS] Less noise on multithreading exceptions.

Make the MT handler silent and output the MT exception type at debug
priority.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Update defconfigs to 2.6.18-rc1.
Ralf Baechle [Thu, 13 Jul 2006 20:25:57 +0000 (21:25 +0100)]
[MIPS] Update defconfigs to 2.6.18-rc1.

18 years ago[MIPS] IP27: Don't destroy interrupt routing information on shutdown irq.
Ralf Baechle [Sun, 25 Jun 2006 15:42:21 +0000 (17:42 +0200)]
[MIPS] IP27: Don't destroy interrupt routing information on shutdown irq.

This fixes the "not syncing: Could not identify cpu/level ..." panic
when a PCI irq is requested the second time.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Avoid interprocessor function calls.
Ralf Baechle [Thu, 22 Jun 2006 21:42:32 +0000 (22:42 +0100)]
[MIPS] Avoid interprocessor function calls.

On the 34K where multiple virtual processors are implemented in a single
core and share a single TLB, interprocessor function calls are not needed
to flush a cache, so avoid them.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[PATCH] lockdep: annotate mm/slab.c
Arjan van de Ven [Thu, 13 Jul 2006 12:46:03 +0000 (14:46 +0200)]
[PATCH] lockdep: annotate mm/slab.c

mm/slab.c uses nested locking when dealing with 'off-slab'
caches, in that case it allocates the slab header from the
(on-slab) kmalloc caches. Teach the lock validator about
this by putting all on-slab caches into a separate class.

this patch has no effect on non-lockdep kernels.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] lockdep: undo mm/slab.c annotation
Ingo Molnar [Thu, 13 Jul 2006 12:44:38 +0000 (14:44 +0200)]
[PATCH] lockdep: undo mm/slab.c annotation

undo existing mm/slab.c lock-validator annotations, in preparation
of a new, less intrusive annotation patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoMerge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 of HEAD
Linus Torvalds [Thu, 13 Jul 2006 14:53:11 +0000 (07:53 -0700)]
Merge commit /linux/kernel/git/davem/sparc-2.6 of HEAD

* HEAD:
  [SPARC]: Fix OF register translations under sub-PCI busses.
  [SPARC64]: Refine Sabre wsync logic.
  [SERIAL] sunsu: Handle keyboard and mouse ports directly.
  [SPARC64]: Fix 2 bugs in sabre_irq_build()
  [SPARC64]: Update defconfig.
  [SPARC64]: Fix make headers_install
  [SPARC64]: of_device_register() error checking fix

18 years ago[PATCH] m68knommu: fix result type in get_user() macro
Greg Ungerer [Wed, 12 Jul 2006 23:32:41 +0000 (09:32 +1000)]
[PATCH] m68knommu: fix result type in get_user() macro

Keep the result holder variable the same type as the quantity we are
retreiving in the get_user() macro - don't go through a pointer version
of the user space address type.

Using the address type causes problems if the address type was const
(newer versions of gcc quite rightly error out for that condition).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] i386: system.h: remove extra semicolons and fix order
Chuck Ebbert [Wed, 12 Jul 2006 20:41:15 +0000 (16:41 -0400)]
[PATCH] i386: system.h: remove extra semicolons and fix order

include/asm-i386/system.h has trailing semicolons in some of the
macros that cause legitimate code to fail compilation, so remove
them. Also remove extra blank lines within one group of macros.

And put stts() and clts() back together; they got separated somehow.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[SPARC]: Fix OF register translations under sub-PCI busses.
David S. Miller [Thu, 13 Jul 2006 06:19:31 +0000 (23:19 -0700)]
[SPARC]: Fix OF register translations under sub-PCI busses.

There is an implicit assumption in the code that ranges will translate
to something that can fit in 2 32-bit cells, or a 64-bit value.  For
certain kinds of things below PCI this isn't necessarily true.

Here is what the relevant OF device hierarchy looks like for one of
the serial controllers on an Ultra5:

    Node 0xf005f1e0
        ranges:      00000000.00000000.00000000.000001fe.01000000.00000000.01000000
                     01000000.00000000.00000000.000001fe.02000000.00000000.01000000
                     02000000.00000000.00000000.000001ff.00000000.00000001.00000000
                     03000000.00000000.00000000.000001ff.00000000.00000001.00000000
        device_type:  'pci'
        model:  'SUNW,sabre'

        Node 0xf005f9d4
            device_type:  'pci'
            model:  'SUNW,simba'

           Node 0xf0060d24
                ranges:  00000010.00000000 82010810.00000000.f0000000 01000000
 00000014.00000000 82010814.00000000.f1000000 00800000
                name:  'ebus'

                Node 0xf0062dac
                    reg:  00000014.003083f8.00000008 --> 0x1ff.f13083f8
                    device_type:  'serial'
                    name:  'su'

So the correct translation here is:

1) Match "su" register to second ranges entry of 'ebus', which translates
   into a PCI triplet "82010814.00000000.f1000000" of size 00800000, which
   gives us "82010814.00000000.f13083f8".

2) Pass-through "SUNW,simba" since it lacks ranges property

3) Match "82010814.00000000.f13083f8" to third ranges property of PCI
   controller node 'SUNW,sabre', and we arrive at the final physical
   MMIO address of "0x1fff13083f8".

Due to the 2-cell assumption, we couldn't translate to a PCI 3-cell
value, and we couldn't perform a pass-thru on it either.

It was easiest to just stop splitting the ranges application operation
between two methods, ->map and ->translate, and just let ->map do all
the work.  That way it would work purely on 32-bit cell arrays instead
of having to "return" some value like a u64.

It's still not %100 correct because the out-of-range check is still
done using the 64 least significant bits of the range and address.
But it does work for all the cases I've thrown at it so far.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[SPARC64]: Refine Sabre wsync logic.
David S. Miller [Thu, 13 Jul 2006 04:16:07 +0000 (21:16 -0700)]
[SPARC64]: Refine Sabre wsync logic.

It is only needed when there is a PCI-PCI bridge sitting
between the device and the PCI host controller which is
not a Simba APB bridge.

Add logic to handle two special cases:

1) device behind EBUS, which sits on PCI
2) PCI controller interrupts

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[SERIAL] sunsu: Handle keyboard and mouse ports directly.
David S. Miller [Thu, 13 Jul 2006 04:04:21 +0000 (21:04 -0700)]
[SERIAL] sunsu: Handle keyboard and mouse ports directly.

The sunsu_ports[] array exists merely to be able to easily
use an integer index to get at the proper serial console
port struct.

We size this only for real ports, not for the keyboard and
mouse, and thus keyboard and mouse port registration would
fail.

Fix this by dynamically allocating the port struct for the
keyboard and mouse, instead of using the sunsu_ports[]
array.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[SPARC64]: Fix 2 bugs in sabre_irq_build()
David S. Miller [Wed, 12 Jul 2006 22:59:53 +0000 (15:59 -0700)]
[SPARC64]: Fix 2 bugs in sabre_irq_build()

When installing the IRQ pre-handler, we were not setting up the second
argument correctly.  It should be a pointer to the sabre_irq_data, not
the config space PIO address.

Furthermore, we only need this pre-handler installed if the device
sits behind a PCI bridge that is not Sabre or Simba/APB.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[SPARC64]: Update defconfig.
David S. Miller [Wed, 12 Jul 2006 21:01:26 +0000 (14:01 -0700)]
[SPARC64]: Update defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[SPARC64]: Fix make headers_install
David Woodhouse [Wed, 12 Jul 2006 20:56:53 +0000 (13:56 -0700)]
[SPARC64]: Fix make headers_install

A minor typo in the include/asm-sparc64/Kbuild file prevents the make
headers_install from building a useful tree of kernel headers for
sparc64.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years ago[SPARC64]: of_device_register() error checking fix
Andrew Morton [Mon, 10 Jul 2006 22:28:54 +0000 (15:28 -0700)]
[SPARC64]: of_device_register() error checking fix

device_create_file() can fail.  This causes the sparc64 compile to
fail when my fanatical __must_check patch is applied, due to -Werror.

[ Added necessary identical fix for sparc32. -DaveM]

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years agoMerge commit master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 of HEAD
Linus Torvalds [Thu, 13 Jul 2006 04:19:42 +0000 (21:19 -0700)]
Merge commit /linux/kernel/git/davem/net-2.6 of HEAD

* HEAD:
  [NET]: fix __sk_stream_mem_reclaim
  [Bluetooth] Fix deadlock in the L2CAP layer
  [Bluetooth] Let BT_HIDP depend on INPUT
  [Bluetooth] Avoid NULL pointer dereference with tty->driver
  [Bluetooth] Remaining transitions to use kzalloc()
  [WAN]: converting generic HDLC to use netif_dormant*()
  [IPV4]: Fix error handling for fib_insert_node call
  [NETROM] lockdep: fix false positive
  [ROSE] lockdep: fix false positive
  [AX.25]: Optimize AX.25 socket list lock
  [IPCOMP]: Fix truesize after decompression
  [IPV6]: Use ipv6_addr_src_scope for link address sorting.
  [TCP] tcp_highspeed: Fix AI updates.
  [MAINTAINERS]: Add proper entry for TC classifier
  [NETROM]: Drop lock before calling nr_destroy_socket
  [NETROM]: Fix locking order when establishing a NETROM circuit.
  [AX.25]: Fix locking of ax25 protocol function list.
  [IPV6]: order addresses by scope

18 years agoMerge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6 of HEAD
Linus Torvalds [Thu, 13 Jul 2006 04:19:23 +0000 (21:19 -0700)]
Merge commit /linux/kernel/git/gregkh/i2c-2.6 of HEAD

* HEAD:
  [PATCH] hwmon: Documentation update for abituguru
  [PATCH] hwmon: Fix for first generation Abit uGuru chips
  [PATCH] hwmon: New maintainer for w83791d
  [PATCH] pca9539: Honor the force parameter
  [PATCH] i2c-algo-bit: Wipe out dead code
  [PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers
  [PATCH] i2c: New mailing list
  [PATCH] i2c-ite: Plan for removal
  [PATCH] i2c-powermac: Fix master_xfer return value
  [PATCH] scx200_acb: Fix the block transactions
  [PATCH] scx200_acb: Fix the state machine
  [PATCH] i2c-iop3xx: Avoid addressing self
  [PATCH] i2c: Fix 'ignore' module parameter handling in i2c-core

18 years agoMerge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 of HEAD
Linus Torvalds [Thu, 13 Jul 2006 04:19:06 +0000 (21:19 -0700)]
Merge commit /linux/kernel/git/gregkh/driver-2.6 of HEAD

* HEAD:
  [PATCH] The scheduled unexport of insert_resource
  [PATCH] remove kernel/power/pm.c:pm_unregister_all()
  [PATCH] Driver core: bus.c cleanups
  [PATCH] Driver core: kernel-doc in drivers/base/core.c corrections
  [PATCH] Driver core: fix driver-core kernel-doc

18 years agoMerge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 of HEAD
Linus Torvalds [Thu, 13 Jul 2006 04:17:41 +0000 (21:17 -0700)]
Merge commit /linux/kernel/git/gregkh/pci-2.6 of HEAD

* HEAD:
  [PATCH] PCI: PCIE power management quirk
  [PATCH] PCI: add PCI Express AER register definitions to pci_regs.h
  [PATCH] PCI: Clear abnormal poweroff flag on VIA southbridges, fix resume
  [PATCH] PCI: poper prototype for arch/i386/pci/pcbios.c:pcibios_sort()

18 years agoMerge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6 of HEAD
Linus Torvalds [Thu, 13 Jul 2006 04:16:52 +0000 (21:16 -0700)]
Merge commit /linux/kernel/git/gregkh/usb-2.6 of HEAD

* HEAD: (44 commits)
  [PATCH] USB: move usb-serial.h to include/linux/usb/
  [PATCH] USB: Anydata: Fixes wrong URB callback.
  [PATCH] USB: gadget section fixups
  [PATCH] USB: another unusual device
  [PATCH] USB: Add one VID/PID to ftdi_sio
  [PATCH] USB: unusual_devs entry for Sony DSC-H5
  [PATCH] USB: unusual_devs entry for Nokia E61
  [PATCH] USB: unusual_devs entry for Nokia N91
  [PATCH] USB: add ZyXEL vendor/product ID to rtl8150 driver
  [PATCH] USB: Option driver: new product ID
  [PATCH] USB: add support for WiseGroup., Ltd SmartJoy Dual PLUS Adapter
  [PATCH] USB: ipw.c driver fix
  [PATCH] USB: remove devfs information from Kconfig
  [PATCH] USB: remove empty destructor from drivers/usb/mon/mon_text.c
  [PATCH] USB: ipaq.c timing parameters
  [PATCH] USB: ipaq.c bugfixes
  [PATCH] USB: ehci: fix bogus alteration of a local variable
  [PATCH] USB: add driver for non-composite Sierra Wireless devices
  [PATCH] USB: fix pointer dereference in drivers/usb/misc/usblcd
  [PATCH] USB: Kill compiler warning in quirk_usb_handoff_ohci
  ...

18 years agoMerge commit master.kernel.org:/pub/scm/linux/kernel/git/gregkh/w1-2.6 of HEAD
Linus Torvalds [Thu, 13 Jul 2006 04:16:32 +0000 (21:16 -0700)]
Merge commit /linux/kernel/git/gregkh/w1-2.6 of HEAD

* HEAD:
  [PATCH] w1: remove drivers/w1/w1.h
  [PATCH] w1: fix idle check loop in ds2482
  [PATCH] W1: remove w1 mail list from lm_sensors.

18 years agoRevert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO...
Linus Torvalds [Thu, 13 Jul 2006 04:04:16 +0000 (21:04 -0700)]
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available"

This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947.

It breaks previously working ide-cs PIO configurations, causing problems
like

ide2: I/O resource 0xF883200E-0xF883200E not free.
ide2: ports already in use, skipping probe

rather than a working kernel.

Cc: Thomas Kleffel <tk@maintech.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[PATCH] Revert "ACPI: execute Notify() handlers on new thread"
Len Brown [Thu, 13 Jul 2006 02:46:42 +0000 (22:46 -0400)]
[PATCH] Revert "ACPI: execute Notify() handlers on new thread"

This effectively reverts commit b8d35192c55fb055792ff0641408eaaec7c88988
by reverts acpi_os_queue_for_execution() to what it was before that,
except it changes the name to acpi_os_execute() to match ACPICA
20060512.

Signed-off-by: Len Brown <len.brown@intel.com>
[ The thread execution doesn't actually solve the bug it set out to
  solve (see

http://bugzilla.kernel.org/show_bug.cgi?id=5534

  for more details) because the new events can get caught behind the AML
  semaphore or other serialization.  And when that happens, the notify
  threads keep on piling up until the system dies. ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years ago[NET]: fix __sk_stream_mem_reclaim
Ian McDonald [Thu, 13 Jul 2006 00:58:53 +0000 (17:58 -0700)]
[NET]: fix __sk_stream_mem_reclaim

__sk_stream_mem_reclaim is only called by sk_stream_mem_reclaim.

As such the check on sk->sk_forward_alloc is not needed and can be
removed.

Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
18 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Wed, 12 Jul 2006 23:32:16 +0000 (16:32 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] sky2: optimize receive restart
  [PATCH] sky2: PHY power on delays
  [PATCH] sky2: NAPI suspend/resume of dual port cards
  [PATCH] sky2: sky2_reset section mismatch
  [PATCH] sk98lin: fix truncated collision threshold mask
  [PATCH] skge: fix truncated collision threshold mask
  [PATCH] sky2: fix truncated collision threshold mask
  [PATCH] myri10ge return value fix
  [PATCH] Update smc91x driver with ARM Versatile board info
  [PATCH] ixgb: fix tx unit hang - properly calculate desciptor count
  [PATCH] smsc-ircc2: fix section reference mismatches
  [PATCH] 8139cp.c printk fix
  [PATCH] s2io driver irq fix
  [PATCH] e1000: irq naming update
  [PATCH] forcedeth: watermark fixup
  [PATCH] forcedeth: deferral fixup
  [PATCH] zd1211rw: usb_clear_halt not allowed in IRQ context
  [PATCH] bcm43xx-softmac: Fix an off-by-one condition in handle_irq_noise

18 years ago[PATCH] The scheduled unexport of insert_resource
Adrian Bunk [Fri, 30 Jun 2006 09:15:42 +0000 (02:15 -0700)]
[PATCH] The scheduled unexport of insert_resource

Implement the scheduled unexport of insert_resource.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] remove kernel/power/pm.c:pm_unregister_all()
Adrian Bunk [Fri, 30 Jun 2006 09:15:43 +0000 (02:15 -0700)]
[PATCH] remove kernel/power/pm.c:pm_unregister_all()

Remove the deprecated and no longer used pm_unregister_all().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] Driver core: bus.c cleanups
Adrian Bunk [Mon, 26 Jun 2006 20:26:56 +0000 (22:26 +0200)]
[PATCH] Driver core: bus.c cleanups

This patch contains the following cleanups:
- make the needlessly global bus_subsys static
- #if 0 the unused find_bus()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] Driver core: kernel-doc in drivers/base/core.c corrections
Henrik Kretzschmar [Tue, 4 Jul 2006 22:53:19 +0000 (00:53 +0200)]
[PATCH] Driver core: kernel-doc in drivers/base/core.c corrections

Corrects the kerneldocs for device_create() and device_destroy()
with an eye on coding style, grammar and readability.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] Driver core: fix driver-core kernel-doc
Randy Dunlap [Thu, 22 Jun 2006 22:14:07 +0000 (15:14 -0700)]
[PATCH] Driver core: fix driver-core kernel-doc

Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:574): No description found for parameter 'class'
Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:574): No description found for parameter 'devt'
Warning(/var/linsrc/linux-2617-g4//drivers/base/core.c:626): No description found for parameter 'devt'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: PCIE power management quirk
Kristen Carlson Accardi [Wed, 12 Jul 2006 15:59:00 +0000 (08:59 -0700)]
[PATCH] PCI: PCIE power management quirk

When changing power states from D0->DX and then from DX->D0, some
Intel PCIE chipsets will cause a device reset to occur.  This will
cause problems for any D State other than D3, since any state
information that the driver will expect to be present coming from
a D1 or D2 state will have been cleared.  This patch addes a
flag to the pci_dev structure to indicate that devices should
not use states D1 or D2, and will set that flag for the affected
chipsets.  This patch also modifies pci_set_power_state() so that
when a device driver tries to set the power state on
a device that is downstream from an affected chipset, or on one
of the affected devices it only allows state changes to or
from D0 & D3.  In addition, this patch allows the delay time
between D3->D0 to be changed via a quirk.  These chipsets also
need additional time to change states beyond the normal 10ms.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: add PCI Express AER register definitions to pci_regs.h
Zhang, Yanmin [Wed, 12 Jul 2006 01:41:47 +0000 (09:41 +0800)]
[PATCH] PCI: add PCI Express AER register definitions to pci_regs.h

Add new defines of PCI-Express AER registers and their bits into file
include/linux/pci_regs.h.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: Clear abnormal poweroff flag on VIA southbridges, fix resume
Matthew Garrett [Fri, 30 Jun 2006 09:31:25 +0000 (02:31 -0700)]
[PATCH] PCI: Clear abnormal poweroff flag on VIA southbridges, fix resume

Some VIA southbridges contain a flag in the ACPI register space that
indicates whether an abnormal poweroff has occured, presumably with the
intention that it can be cleared on clean shutdown.  Some BIOSes check this
flag at resume time, and will re-POST the system rather than jump back to
the OS if it's set.  Clearing it at boot time appears to be sufficient.
I'm not sure if drivers/pci/quirks.c is the right place to do it, but I'm
not sure where would be cleaner.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg KH <greg@kroah.com>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: "Yu, Luming" <luming.yu@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] PCI: poper prototype for arch/i386/pci/pcbios.c:pcibios_sort()
Adrian Bunk [Wed, 28 Jun 2006 16:54:33 +0000 (18:54 +0200)]
[PATCH] PCI: poper prototype for arch/i386/pci/pcbios.c:pcibios_sort()

This patch adds a proper prototype for pcibios_sort() in
arch/i386/pci/pci.h.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: move usb-serial.h to include/linux/usb/
Greg Kroah-Hartman [Wed, 12 Jul 2006 04:22:58 +0000 (21:22 -0700)]
[PATCH] USB: move usb-serial.h to include/linux/usb/

USB serial outside of the kernel tree can not build properly due to
usb-serial.h being buried down in the source tree.  This patch moves the
location of the file to include/linux/usb and fixes up all of the usb
serial drivers to handle the move properly.

Cc: Sergei Organov <osv@javad.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Anydata: Fixes wrong URB callback.
Luiz Fernando N. Capitulino [Tue, 11 Jul 2006 17:19:25 +0000 (14:19 -0300)]
[PATCH] USB: Anydata: Fixes wrong URB callback.

 Anydata is using usb_serial_generic_write_bulk_callback() for its
read URB, but it should use usb_serial_generic_read_bulk_callback()
instead (it's a read URB, isn't it?).

 Reported by Jon K Hellan <hellan@acm.org>.

Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: gadget section fixups
David Brownell [Thu, 6 Jul 2006 22:48:53 +0000 (15:48 -0700)]
[PATCH] USB: gadget section fixups

Recent section changes broke gadget builds on some platforms.  This patch
is the best fix that's available until better section markings exist:

 - There's a lot of cleanup code that gets used in both init and exit paths;
   stop marking it as "__exit".

   (Best fix for this would be an "__init_or_exit" section marking, putting
   the cleanup in __init when __exit sections get discarded else in __exit.)

 - Stop marking the use-once probe routines as "__init" since references
   to those routines are not allowed from driver structures.  They're now
   marked "__devinit", which in practice is a net lose.

   (Best fix for this is likely to separate such use-once probe routines
   from the driver structure ... but in general, all busses that aren't
   hotpluggable will be forced to waste memory for all probe-only code.)

In general these broken section rules waste an average of two to four kBytes
per driver of code bloat ... because none of the relevant code can ever be
reused after module initialization.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: another unusual device
Phil Dibowitz [Tue, 4 Jul 2006 19:46:43 +0000 (12:46 -0700)]
[PATCH] USB: another unusual device

Please add the attached device to unusual_devs.h.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Add one VID/PID to ftdi_sio
Colin Leroy [Tue, 11 Jul 2006 09:36:43 +0000 (11:36 +0200)]
[PATCH] USB: Add one VID/PID to ftdi_sio

This patch adds the Testo USB interface to the list of devices
recognized by the ftdi_sio module. This device is based on a FT232BL
chip, and is used as an interface to get data from digital sensors
(thermometer, etc). See http://www.testo.com/

Signed-off-by: Colin Leroy <colin@colino.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: unusual_devs entry for Sony DSC-H5
Lars Jacob [Mon, 10 Jul 2006 15:53:58 +0000 (11:53 -0400)]
[PATCH] USB: unusual_devs entry for Sony DSC-H5

This patch (as749) extends the unusual_devs entry for the Sony DSC-T1 and
T5 to cover the H5 as well.

From: Lars Jacob <jacob.lars@googlemail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: unusual_devs entry for Nokia E61
Alan Stern [Mon, 10 Jul 2006 15:51:12 +0000 (11:51 -0400)]
[PATCH] USB: unusual_devs entry for Nokia E61

This patch (as748) adds an unusual_devs entry for the Nokia E61 mobile
phone.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: unusual_devs entry for Nokia N91
Alan Stern [Fri, 7 Jul 2006 17:45:13 +0000 (13:45 -0400)]
[PATCH] USB: unusual_devs entry for Nokia N91

This patch (as745) adds an unusual_devs entry for the Nokia N91, just like
the entry for the N80 added a couple of weeks ago.  Apparently Nokia isn't
using very good firmware these days...

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: add ZyXEL vendor/product ID to rtl8150 driver
Dan Streetman [Wed, 5 Jul 2006 23:17:27 +0000 (19:17 -0400)]
[PATCH] USB: add ZyXEL vendor/product ID to rtl8150 driver

I just got a "ZyXEL Prestige USB Adapter" that is actually RTL8150
adapter.  Here is the relevant /proc/bus/usb/devices output (after
adding the vendor/product IDs to the driver):

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#=119 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0586 ProdID=401a Rev= 1.00
S:  Manufacturer=ZyXEL
S:  Product=Prestige USB Adapter
S:  SerialNumber=1027
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=120mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=rtl8150
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=1ms

This patch adds the ZyXEL vendor ID to the rtl8150.c driver.  The
device has absolutely no identifying marks on the outside for model
type, just a serial number, and I can't find anything on ZyXEL's
website, so I called the product ID PRODUCT_ID_PRESTIGE to match the
product string.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: <petkan@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Option driver: new product ID
Matthias Urlichs [Thu, 6 Jul 2006 11:12:53 +0000 (13:12 +0200)]
[PATCH] USB: Option driver: new product ID

Yet another "same name, somewhat different hardware" product.

Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: add support for WiseGroup., Ltd SmartJoy Dual PLUS Adapter
Navaho Gunleg [Fri, 30 Jun 2006 07:44:03 +0000 (09:44 +0200)]
[PATCH] USB: add support for WiseGroup., Ltd SmartJoy Dual PLUS Adapter

This patch is to get the WiseGroup.,Ltd SmartJoy Dual Plus PS2-to-USB
Adapter [0x6677:0x8802] correctly detected. It sets the NOGET and
MULTI_INPUT quirks to make 2 joystick nodes appear in stead of only
one.

(As of yet, only confirmed working by myself.)

Signed-off-by: Navaho Gunleg <navahogunleg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ipw.c driver fix
Bart Oldeman [Sun, 2 Jul 2006 03:07:10 +0000 (15:07 +1200)]
[PATCH] USB: ipw.c driver fix

The below patch fixes the ipw module in kernel 2.6.17 for me; without
this change it simply does not work at all (all but the first writes are
refused because write_urb_busy is always 1).

This problem was there in 2.6.15 as well, but at that point I used the
(updated) ipw.c, version 0.4, from
http://www.neology.co.za/products/opensource/ipwireless/ which no longer
compiles with 2.6.17. It can be made to after a few changes but
obviously it's easier if the built-in ipw driver works instead of having
to download one from the neology site.

From: Bart Oldeman <bartoldeman@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: remove devfs information from Kconfig
Michal Piotrowski [Mon, 3 Jul 2006 12:20:39 +0000 (14:20 +0200)]
[PATCH] USB: remove devfs information from Kconfig

Devfs is gone. We can remove that information.

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: remove empty destructor from drivers/usb/mon/mon_text.c
Christoph Lameter [Fri, 30 Jun 2006 09:34:47 +0000 (02:34 -0700)]
[PATCH] USB: remove empty destructor from drivers/usb/mon/mon_text.c

Remove destructor and call kmem_cache_create with NULL for the destructor.

Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ipaq.c timing parameters
Frank Gevaerts [Fri, 30 Jun 2006 09:34:45 +0000 (02:34 -0700)]
[PATCH] USB: ipaq.c timing parameters

Adds configurable waiting periods to the ipaq connection code. These are
not needed when the pocketpc device is running normally when plugged in,
but they need extra delays if they are physically connected while
rebooting.

There are two parameters :

* initial_wait : this is the delay before the driver attemts to start the
  connection. This is needed because the pocktpc device takes much
  longer to boot if the driver starts sending control packets too soon.

* connect_retries : this is the number of times the control urb is
  retried before finally giving up. The patch also adds a 1 second delay
  between retries.

I'm not sure if the cases where this patch is useful are general enough
to include this in the kernel.

Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ipaq.c bugfixes
Frank Gevaerts [Fri, 30 Jun 2006 09:34:44 +0000 (02:34 -0700)]
[PATCH] USB: ipaq.c bugfixes

This patch fixes several problems in the ipaq.c driver with connecting
and disconnecting pocketpc devices:

* The read urb stayed active if the connect failed, causing nullpointer
  dereferences later on.

* If a write failed, the driver continued as if nothing happened. Now it
  handles that case the same way as other usb serial devices (fix by
  Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>)

Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ehci: fix bogus alteration of a local variable
David Brownell [Fri, 30 Jun 2006 09:34:42 +0000 (02:34 -0700)]
[PATCH] USB: ehci: fix bogus alteration of a local variable

In a rare and all-but-unused path, the EHCI driver could reuse a variable
in a way that'd make trouble.  Specifically, if the first root hub port
gets an overcurrent event (rare) during a remote wakeup scenario (all but
unused in today's Linux, except for folk working with suspend-to-RAM and
similar sleep states), that would look like a fatal error which would shut
down the controller.  Fix by not reusing that variable.

Spotted by Per Hallsmark <saxofon@musiker.nu>
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=6661

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: add driver for non-composite Sierra Wireless devices
Kevin Lloyd [Fri, 30 Jun 2006 18:17:55 +0000 (11:17 -0700)]
[PATCH] USB: add driver for non-composite Sierra Wireless devices

This patch creates a new driver, sierra.c, that supports the new
non-composite Sierra Wireless WWAN devices. The older Sierra
Wireless and Airprime devices are supported in airprime.c.

Signed-off-by: Kevin Lloyd <linux@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: fix pointer dereference in drivers/usb/misc/usblcd
Eric Sesterhenn [Mon, 26 Jun 2006 22:57:42 +0000 (00:57 +0200)]
[PATCH] USB: fix pointer dereference in drivers/usb/misc/usblcd

coverity spotted (id #185) that we still use urb, if the allocation
fails in the error path. This patch fixes this by returning directly.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Kill compiler warning in quirk_usb_handoff_ohci
Kyle McMartin [Sun, 25 Jun 2006 22:45:29 +0000 (18:45 -0400)]
[PATCH] USB: Kill compiler warning in quirk_usb_handoff_ohci

Move variables only used on !__hppa__ into that #ifndef section. This
cleans up a compiler warning on parisc. Problem pointed out by
Joel Soete.

Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB serial ftdi_sio: Prevent userspace DoS
Ian Abbott [Mon, 26 Jun 2006 11:59:17 +0000 (12:59 +0100)]
[PATCH] USB serial ftdi_sio: Prevent userspace DoS

This patch limits the amount of outstanding 'write' data that can be
queued up for the ftdi_sio driver, to prevent userspace DoS attacks (or
simple accidents) that use up all the system memory by writing lots of
data to the serial port.

The original patch was by Guillaume Autran, who in turn based it on the
same mechanism implemented in the 'visor' driver.  I (Ian Abbott)
re-targeted the patch to the latest sources, fixed a couple of errors,
renamed his new structure members, and updated the implementations of
the 'write_room' and 'chars_in_buffer' methods to take account of the
number of outstanding 'write' bytes.  It seems to work fine, though at
low baud rates it is still possible to queue up an amount of data that
takes an age to shift (a job for another day!).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB serial visor: fix race in open/close
Ian Abbott [Mon, 26 Jun 2006 10:44:22 +0000 (11:44 +0100)]
[PATCH] USB serial visor: fix race in open/close

The anti user-DoS mechanism in the USB serial 'visor' driver can fail in
the following way:

visor_open: priv->outstanding_urbs = 0
visor_write: ++priv->outstanding_urbs
visor_close:
visor_open: priv->outstanding_urbs = 0
visor_write_bulk_callback: --priv->outstanding_urbs

So priv->outstanding_urbs ends up as (unsigned long)(-1).  Not good!

I haven't seen this happen with the visor driver as I don't have the
hardware, but I have seen it while testing a patch to implement the same
functionality in the ftdi_sio driver (patch not yet submitted).

The fix is pretty simple: don't reinitialize outstanding_urbs in
visor_open.  (Again, I haven't tested the fix in visor, but I have
tested it in ftdi_sio.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB Storage: Uname in PR/SC Unneeded message
Phil Dibowitz [Sun, 25 Jun 2006 00:27:54 +0000 (17:27 -0700)]
[PATCH] USB Storage: Uname in PR/SC Unneeded message

This patch adds the kernel version to the usb-storage Protocol/SubClass
unneeded message in order to help us troubleshoot such problems.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB Storage: US_FL_MAX_SECTORS_64 flag
Phil Dibowitz [Sun, 25 Jun 2006 00:27:10 +0000 (17:27 -0700)]
[PATCH] USB Storage: US_FL_MAX_SECTORS_64 flag

This patch adds a US_FL_MAX_SECTORS_64 and removes the Genesys special-cases
for this that were in scsiglue.c. It also adds the flag to other devices
reported to need it.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] usbcore: fixes for hub_port_resume
Alan Stern [Wed, 28 Jun 2006 15:20:41 +0000 (11:20 -0400)]
[PATCH] usbcore: fixes for hub_port_resume

This patch (as731) makes a couple of small fixes to the hub_port_resume
routine:

Don't return status >= 0 when an error occurs;

Clear the port-change-suspend status indicator after
resuming a device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: unusual_devs entry for Samsung MP3 player
Ernis [Mon, 26 Jun 2006 20:02:43 +0000 (16:02 -0400)]
[PATCH] USB: unusual_devs entry for Samsung MP3 player

This patch (as730) contains an unusual_devs entry for a Samsung MP3
device.

From: Ernis <ernisv@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] usb-storage: unusual_devs entry for Motorola RAZR V3x
Davide Perini [Mon, 19 Jun 2006 21:07:39 +0000 (17:07 -0400)]
[PATCH] usb-storage: unusual_devs entry for Motorola RAZR V3x

This patch (as725) adds an unusual_devs entry for the Motorola RAZR V3x.

From: Davide Perini <perini.davide@dpsoftware.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB hub: don't return status > 0 from resume
Alan Stern [Mon, 19 Jun 2006 19:12:38 +0000 (15:12 -0400)]
[PATCH] USB hub: don't return status > 0 from resume

finish_device_resume() in the hub driver isn't careful always to return
a negative code in all the error pathways.  It also doesn't return 0 in
all the success pathways.  This patch (as724) fixes the behavior.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] usb-storage: fix race between reset and disconnect
Alan Stern [Mon, 19 Jun 2006 18:50:15 +0000 (14:50 -0400)]
[PATCH] usb-storage: fix race between reset and disconnect

My recent patch converting usb-storage to use
usb_reset_composite_device() added a bug, a race between reset and
disconnect.  It was necessary to drop the private lock while executing a
reset, and if a disconnect occurs at that time it will cause a crash.

This patch (as722) fixes the problem by explicitly checking for an early
termination after executing each command.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: update for acm in quirks and debug
Oliver Neukum [Fri, 23 Jun 2006 07:14:17 +0000 (09:14 +0200)]
[PATCH] USB: update for acm in quirks and debug

this adds
better debugging output &
an update of the quirk list
to the acm driver

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: rename Cypress CY7C63xxx driver to proper name and fix up some tiny...
Oliver Bock [Thu, 22 Jun 2006 17:04:47 +0000 (19:04 +0200)]
[PATCH] USB: rename Cypress CY7C63xxx driver to proper name and fix up some tiny things

This is a new driver for the Cypress CY7C63xxx mirco controller series.
It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus
GmbH.  It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I
ported to kernel 2.6 using sysfs. I intend to support more controllers
of this family (and more features) as soon as I get hold of the required
IDs etc. Please see the source code's header for more information.

Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] usbfs: use the correct signal number for disconnection
Zoran Marceta [Thu, 22 Jun 2006 17:28:11 +0000 (13:28 -0400)]
[PATCH] usbfs: use the correct signal number for disconnection

usbfs stores the wrong signal number in the siginfo structure used for
notifying user programs about device disconnect.  This patch (as726)
fixes it.

From: Zoran Marceta <Zoran.Marceta@micronasnit.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Support for Susteen Datapilot Universal-2 cable in pl2303
Matthew Meno [Wed, 21 Jun 2006 19:25:53 +0000 (15:25 -0400)]
[PATCH] USB: Support for Susteen Datapilot Universal-2 cable in pl2303

The Susteen Datapilot cable
(http://www.susteen.com/productdetail/71/producthl/Notempty) has an
internal pl2303 to communicate with a set of dummy connector-ends that
connect to a variety of cell phones. I've found that it works right out
of the box by simply adding the product/vendor id to the pl2303 driver.

Signed-off-by: Matt Meno <mmeno@idealcorp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Add some basic WUSB definitions
Inaky Perez-Gonzalez [Tue, 20 Jun 2006 01:19:01 +0000 (18:19 -0700)]
[PATCH] USB: Add some basic WUSB definitions

This patch adds basic Wireless USB 1.0 definitions to usb_ch9.h that
fit into the existing set of declarations. Boils down to two new
recipients for requests (ports and remote pipes), rpipe reset and
abort request codes and wire adapter and remote pipe descriptor
types.

Wire adapters are the USB <-> Wireless USB adaptors; remote pipes
are used by those adapters to pipe the host <-> endpoint traffic.

Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: fix visor leaks
Pete Zaitcev [Wed, 21 Jun 2006 22:03:40 +0000 (15:03 -0700)]
[PATCH] USB: fix visor leaks

This patch fixes blatant leaks in visor driver and makes it report
mode sensible things in ->write_room (this is only needed if your visor
is a terminal though).

It is made to fit into 80 columns with a temporary variable.
Might even save a few instructions...

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: fix usb-serial leaks, oopses on disconnect
Pete Zaitcev [Wed, 21 Jun 2006 22:00:45 +0000 (15:00 -0700)]
[PATCH] USB: fix usb-serial leaks, oopses on disconnect

This fix addresses two issues:
- Unattached port structures were not freed
- My initial fix for crash when eventd runs a work in a freed port
  did not go far enough

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: OHCI hub code unaligned access
David Miller [Thu, 22 Jun 2006 05:26:09 +0000 (22:26 -0700)]
[PATCH] USB: OHCI hub code unaligned access

I noticed this while debugging something unrelated on
sparc64.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: new device ids for ftdi_sio driver
Christophe Mariac [Fri, 23 Jun 2006 15:36:21 +0000 (17:36 +0200)]
[PATCH] USB: new device ids for ftdi_sio driver

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: new device id for Thorlabs motor driver
D. Peter Siddons [Sat, 17 Jun 2006 22:09:15 +0000 (18:09 -0400)]
[PATCH] USB: new device id for Thorlabs motor driver

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: Addition of vendor/product id pair for pl2303 driver
Peter Moulder [Mon, 19 Jun 2006 12:47:49 +0000 (22:47 +1000)]
[PATCH] USB: Addition of vendor/product id pair for pl2303 driver

Text from the back of the box, for your information/amusement:

 USB DATA CABLE
   FOR K700 Series

 The USB Cable is an ideal link between your mobile phone and PC. Employing
 the user-friendiy [sic] USB standard,its capacity for rapid data transfer enables functions
 such as synchronization of phone book and calendar,as well as Internet browsing via
 a modem-enabled phone.Autual [sic] connection speed is dependent on phone capacity.

 MADE IN CHINA

From: Peter Moulder <Peter.Moulder@infotech.monash.edu.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: fix usb kernel-doc
Randy Dunlap [Thu, 22 Jun 2006 22:12:41 +0000 (15:12 -0700)]
[PATCH] USB: fix usb kernel-doc

Warning(/var/linsrc/linux-2617-g4//include/linux/usb.h:66): No description found for parameter 'ep_dev'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: ohci bits for the cirrus ep93xx
Lennert Buytenhek [Fri, 23 Jun 2006 21:02:01 +0000 (23:02 +0200)]
[PATCH] USB: ohci bits for the cirrus ep93xx

This patch adds OHCI glue bits for the USB host interface in the
Cirrus ep93xx (arm920t) CPU.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: au1200: EHCI and OHCI fixes
Daniel Mack [Fri, 23 Jun 2006 20:36:07 +0000 (21:36 +0100)]
[PATCH] USB: au1200: EHCI and OHCI fixes

I received an DBAU1200 eval kit from AMD a few days ago and tried to
enable the USB2 port, but the current linux-2.6 GIT did not even
compile with CONFIG_SOC_1200, CONFIG_SOC_AU1X00, CONFIG_USB_EHCI and
CONFIG_USB_OHCI set.
Furthermore, in ehci-hcd.c, platform_driver_register() was called with
an improper argument of type 'struct device_driver *' which of course
ended up in a kernel oops. How could that ever have worked on your
machines?

Anyway, here's a trivial patch that makes the USB subsystem working
on my board for both OHCI and EHCI.
It also removes the /* FIXME use "struct platform_driver" */.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] USB: au1xxx: compile fixes for OHCI for au1200
Domen Puncer [Fri, 23 Jun 2006 10:55:43 +0000 (11:55 +0100)]
[PATCH] USB: au1xxx: compile fixes for OHCI for au1200

Compile fixes for au1200 ohci.

First part looks a bit hackish... but it works for me.

Signed-off-by: Domen Puncer <domen.puncer@ultra.si>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: Documentation update for abituguru
Hans de Goede [Wed, 5 Jul 2006 16:09:09 +0000 (18:09 +0200)]
[PATCH] hwmon: Documentation update for abituguru

Documentation update for the new bank1_types module param.

Also add what we know about different revisions of the uGuru and
a note that the abituguru driver unfortunatly does not work with the
latest and greatest motherboards, which have what I think is revision
4 of the uGuru.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: Fix for first generation Abit uGuru chips
Hans de Goede [Wed, 5 Jul 2006 16:07:49 +0000 (18:07 +0200)]
[PATCH] hwmon: Fix for first generation Abit uGuru chips

Now that the abituguru driver is seeing some more widespread testing
it has turned out that one the first generation of Abit uGuru
motherboards, with uGuru revision 1, the autodetect bank1 sensor type
code doesn't (always) work. This patch adds a module param to override
the autodetect, and it adds validity checks for the value of the 2
other autodetection override module params. An example of howto use
the new param can be found here:
http://lm-sensors.org/wiki/Configurations/Abit/AN7

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] hwmon: New maintainer for w83791d
Charles Spirakis [Wed, 5 Jul 2006 16:05:15 +0000 (18:05 +0200)]
[PATCH] hwmon: New maintainer for w83791d

Add Charles Spirakis as the maintainer for the w83791d sensor chip
driver.

Signed-off-by: Charles Spirakis <bezaur@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] pca9539: Honor the force parameter
Ben Gardner [Sat, 1 Jul 2006 15:22:18 +0000 (17:22 +0200)]
[PATCH] pca9539: Honor the force parameter

The pca9539 driver doesn't honor the force parameter; it always does
detection. This patch will skip detection if forced.

Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c-algo-bit: Wipe out dead code
Uwe Bugla [Sat, 1 Jul 2006 15:25:08 +0000 (17:25 +0200)]
[PATCH] i2c-algo-bit: Wipe out dead code

i2c-algo-bit: Wipe out dead code

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
18 years ago[PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers
Mark M. Hoffman [Sat, 1 Jul 2006 15:16:06 +0000 (17:16 +0200)]
[PATCH] i2c: Handle i2c_add_adapter failure in i2c algorithm drivers

Content-Disposition: inline; filename=i2c-algo-error-handling-fix.patch

It is possible for i2c_add_adapter() to fail.  Several I2C algorithm
drivers ignore that fact.  This (compile-tested only) patch fixes them.

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>