Staging: iio: Fix sparse endian warning

Fix following sparse warning:
warning: cast to restricted __be16

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: Remove __cplusplus check in header files

Remove unnecessary __cplusplus check in header files as it is not
required.

Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: fix type mismatch warnings

Compiling speakup driver with sparse produces following warning:

drivers/staging/speakup/serialio.c:22:9: warning: incorrect type in
initializer (different base types)
drivers/staging/speakup/serialio.c:22:9:    expected unsigned int
[unsigned] flags
drivers/staging/speakup/serialio.c:22:9:    got restricted upf_t

This patch fixes it.

Signed-off-by: Okash Khawaja <okash.khawaja@gmail.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()

This function calls some helper functions to convert the counter variant
specific clock select bits into the generic enum ni_gpct_clock_source_bits
equivelent. These helper functions currently BUG() if the clock select
bits are invalid.

It then calls ni_tio_clock_period_ps() to figure out the clock period
based on the generic clock source. This function could also BUG() if
the prescale bits are invalid.

In reality this should never happen but refactor the code to return
-EINVAL instead and remove the BUG() checks.

These functions are also called by ni_tio_set_sync_mode(). When this
function is called by ni_tio_set_clock_src() the counter select bits
have already been validated.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: remove BUG() in ni_tio_set_gate_src()

This BUG() can never happen. The previous ni_tio_has_gate2_registers()
check will have already caused the function to return -EINVAL.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: fix ni_tio_insn_config()

The (*insn_config) functions are supposed to return an errno or the number
of 'data' values used for the instruction (insn->n). Currently this function
returns an errno or 0. Fix the function to work like the core expects.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_gate_src()

This function calls some helper functions to convert the counter variant
specific gate select bits into the generic enum ni_gpct_clock_source_bits
equivelent. These helper functions currently BUG() if the gate select
bits are invalid.

This should never happen but refactor the code to return -EINVAL instead
and remove the BUG() checks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: validate clock source

Refactor the functions that determine the clock source bits so that they
return -EINVAL if the clock source is invalid. Pass the errno back to
ni_tio_insn_config().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tiocmd: remove BUG() which can never occur

All the counter_dev->variant options are handled by the switch.
Remove the BUG() which can never occur.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tiocmd: remove unsed param from ni_tio_acknowledge_and_confirm()

The 'stale_data' pointer is always NULL. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tiocmd: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tiocmd: Prefer 'unsigned int' to bare use of 'unsigned'

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: tidy up ni_tio_arm()

Make this function a bit more consise by absorbing the GI_HW_ARM_SEL_MASK()
inline helper and combine the two switch (start_trigger) code paths.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: tidy up ni_tio_set_sync_mode()

The 'force_alt_sync' paramater is always 0. Remove it.

Absorb the GI_ALT_SYNC() inline helper and use some local variables
to clarify this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: tidy up ni_tio_get_gate_src()

Clarify the code a bit by handling the NI_GPCT_DISABLED_GATE_SELECT source
in the common code path.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: fix block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: Prefer kernel type 'u64' over 'uint64_t'

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: Prefer 'unsigned int' to bare use of 'unsigned'

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio.h: remove unnecessary forward declarations

These struct forward declarations are not needed. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio.h: fix block comment

Fix the checkpatch.pl issue:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio.h: tidy up struct ni_gpct

Fix the checkpatch.pl issues:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: Prefer kernel type 'u64' over 'uint64_t'
CHECK: spinlock_t definition without comment

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio.h: tidy up struct ni_gpct_device

Fix the checkpatch.pl issues:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: spinlock_t definition without comment

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: tidy up struct ni_gpct_device (*{write, read}_register)

For aesthetics, rename these callbacks to simply read/write. Change the
'unsigned' parameters to 'unsigned int'.

This fixes a number of checkpatch.pl issues:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio_internal: export {read, write)_register()

Move these inline functions out of the header and export them instead.
These functions have pretty generic names, rename them.

Fix the checkpatch.pl issues:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: Avoid crashing the kernel - try using WARN_ON & recovery code
       rather than BUG() or BUG_ON()

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio_internal: simplify ni_tio_counting_mode_registers_present()

Only the e series gpct variant does not have counting mode registers.
Simplfy this function. For aesthetics, return bool instead of int.

This fixes the checkpatch.pl issues:
CHECK: spaces preferred around that '*' (ctx:ExV)
CHECK: Avoid crashing the kernel - try using WARN_ON & recovery code
       rather than BUG() or BUG_ON()

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: export and fix ni_tio_set_bits()

Move the inline function from the header and export it instead.

Fix the checkpatch.pl issue:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

The 'unsigned' vars can safely be changed to 'unsigned int'.

This allows moving ni_tio_set_bits_transient() into the driver and
making it static.

Fix the checkpatch.pl issue:
CHECK: Avoid crashing the kernel - try using WARN_ON & recovery code
       rather than BUG() or BUG_ON()

The BUG_ON() is overkill. All the drivers that call this function pass
'register_index' values that are valid. Just check the 'register_index'
before updating the software copy and writing the register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: export and fix ni_tio_get_soft_copy()

Move the inline function from the header and export it instead.

For the checkpatch.pl issues:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
CHECK: Avoid crashing the kernel - try using WARN_ON & recovery code
       rather than BUG() or BUG_ON()

The 'unsigned' vars can safely be changed to 'unsigned int'.

The BUG_ON() is overkill. All the drivers that call this function pass
'register_index' values that are valid. Just check the 'register_index'
and return 0 if it's not valid.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: fix ni_tio_arm() params/vars

As suggested by checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

The 'arm' parameter is really a true/false flag. For aesthetics,
change it to a bool.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: fix ni_tio_set_gate_src() params/vars

As suggested by checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio_internal.h: fix block comment issues

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio_internal.h: tidy up bit defines

Fix the checkpatch.pl issues:
CHECK: Prefer using the BIT macro

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: plx9052.h: fix block comment issues

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: plx9052.h: tidy up bit defines

Fix the checkpatch.pl issues:
CHECK: Prefer using the BIT macro

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: z8536: tidy up bit defines

Fix the checkpatch.pl issues:
CHECK: Prefer using the BIT macro

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: ni_gpct_device_destroy() can handle a NULL pointer

Remove the unnecessary NULL pointer check.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tio: make ni_gpct_device_destroy() NULL pointer safe

Modify the pointer check to make this function NULL pointer safe.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc.h: fix block comment issues

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_pci: tidy up bit define

As suggested by checkpatch.pl:
CHECK: Prefer using the BIT macro

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_cs: fix block comment issues

Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
WARNING: line over 80 characters

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_common: tidy up block comments

Fix the checkpatch.pl issues:
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_regs.h: tidy up bit defines

As suggested by checkpatch.pl:
CHECK: Prefer using the BIT macro

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: remove some unnecessary defines

The EEPROM_SIZE and NUM_AO_CHAN defines are only used once and they
don't add any significant clarity to the driver. They are also pretty
generic symbol names. Remove them and just open code the values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: remove unnecessary comment

The "Configuration options" are documented in the comedi driver comment
block. Remove the redundant comment before the drivers (*attach) function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: remove redundant comedi_check_trigger_arg_min()

The 'convert_arg' sets the acquisition timing of the analog input command.
The maximum speed (the minimum timing) depends on the board 'ai_speed' which
if always >= 4000. Remove the redundant 'min' check,

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: refactor dt282x_ns_to_timer()

Define the pacer clock limits and remove the magic numbers. Refactor
the code to use a common path to return the actual 'ns' timing and
the timer divisor value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: update the MODULE_DESCRIPTION

Change the generic MODULE_DESCRIPTION text to something more useful.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: refactor GPCT_OFFSET

This driver supports boards that have 1 or 2 TIO chips with base
addresses 0x800 apart. Replace the static const array 'GPCT_OFFSET'
with a define and calculate the base address based on the chip index.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove spinlock 'dma_cfg_lock'

This spinlock is only used to protect changes to the private data 'dma_cfg'.

Before calling any function that would change the 'dma_cfg' the spinlock
'mite_channel_lock' is also locked. That spinlock is not unlocked until
after the 'dma_cfg' change.

Remove the redundant spinlock.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove ni_gpct_to_660x_register[]

enum ni_gpct_register and enum ni_660x_register now have a 1:1
relationship for the NITIO_* registers. The static const array
is no longer necessary to find the proper NI660X_* register for
a given NITIO_*. Remove it and refactor the register read/write
functions.

Use the NITIO_* values to init the ni_660x_reg_data[] array and
remove the unnecessary NI660X_* enum values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: sort enum ni_660x_register

Sort this enum so that it has a 1:1 relationship with the ni_tio.h
enum ni_gpct_register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove inline mite_ring()

This fuction just returns a pointer from the private data. The name
might provide some confusion since it appears to be an exported
function from the mite driver.

Just remove it and get the pointer directly where needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: default DIO channels with subdevice init

For aesthetics, move the initialization of the default routing for the
DIO channels so it happens when the subdevice is initialized.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: initialize the counter with the subdevice init

Remove the extra for loop and just initialize the counter as the subdevices
are created.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: allocate counters early in (*auto_attach)

The ni_gpct_device_construct() could fail allocating the memory for
device and its counters. For aesthetics, call the function before
initializing the subdevices.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: init TIO chips before subdevice init

For aesthetics, initialize the TIO chips before the subdevices are
allocated and initialized.

Refactor the function to initialize all the TIO chips and move it
to a better place in the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: disable interrupts when detaching driver

Make sure the interrupts are disabled before freeing the irq.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: ni_gpct_device_destroy() can handle a NULL pointer

Remove the unnecessary NULL pointer check.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up the counter subdevices init

For aesthetics, add some whitespace to the subdevice init and use
a couple local variables to make the code easier to follow.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up the misc. constants

Remove enum ni_660x_constants and just #define the value.

Move all the constant #defines so they are in one place and rename
them so they are more conesistent.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: fix memory barrier without comment

Fix the checkpatch.pl issue. Move the memory barrier to a better place.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: add comments for the spinlock_t definitions

Fix the checkpatch.pl issues:

CHECK: spinlock_t definition without comment

For aesthetics, rename the 'soft_reg_copy_lock' to clarify what it's
used for.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: refactor ni_gpct_to_660x_register()

Convert this big switch into an array and refactor ni_660x_gpct_{write,read}()
functions to use the array to find the register offset.

All the TIO (GPCT) registers are included in the array except for NITIO_G0_ABZ
and NITIO_G1_ABZ. These registers only exist on the ni_pcimio m-series boards
and this driver will never read/write them.

Just in case someone adds a new entry to the enum ni_gpct_register in ni_tio.h,
add a dev_warn() for any unhandled registers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: add a comment about the initial DIO state

The (*auto_attach) initializes all the DIO channels to a default state.
Add a comment for clarity.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up ni_660x_set_pfi_routing()

Use the comedi.h provided constants (enum ni_660x_pfi_routing) instead
of defining new ones for the output sources.

Use a switch to clarify the channel/source validation.

For aesthetics, rename the private data members 'pfi_output_selects' and
'pfi_direction_bits'.

Remove the 'min_counter_pfi_chan' and 'max_dio_pfi_chan' from
enum ni_660x_constants. The open coded values make the code easier
to follow.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up ni_660x_dio_insn_bits()

Use some local variables to clarify this function.

This (*insn_bits) function is a bit different from most comedi drivers.
Add some comments to clarify why the shifts are used.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up Digital I/O subdevice init

Add some whitespace to the Digital I/O subdevice init and add a
comment about the channels. This driver is a bit goofy, only 32 of
the 40 channels can actually be used for Digital I/Os and 32 of
them can be routed to the counters for alternate use.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: Prefer kernel type 'u64' over 'uint64_t'

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: Prefer 'unsigned int' to bare use of 'unsigned'

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove ni_660x_num_counters()

This inline function is only used by the (*auto_attach). Remove it
and just use a local variable for the calculation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove enum ni_660x_subdevices

Hard-coding the subdevice order is normally a bad idea. If a new subdevice
is added, or removed, it could potentially break pretty badly.

Remove the enum and associated NI_660X_GPCT_SUBDEV() helper that hard-code
the subdevice order.

Fix the (*auto_attach) so it initializes all the subdevices without depending
on the hard-coded order.

Change the interrupt handler so that all the counter subdevices are handled
without depending on the hard-coded order.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: fix block comment issues

Fix the checkpatch.pl issues about:

WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove BUG_ON() in ni_660x_request_mite_channel()

This BUG_ON() happens if a mite DMA channel is already requested when an
ansynchronous command is started for one of the counter subdevices.

The comedi core will only call the (*do_cmd) if the subdevice is not busy.
In this driver, the (*cancel) for the subdevice will always release any
requested mite DMA channel.

Remove the BUG_ON() which can never occur.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up ni_660x_select_pfi_output()

Tidy up this function to fix the checkpatch.pl issues:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

For aesthetics, remove the static const local variables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up ni_gpct_{write, read}_register()

Rename these functions so they have namespace associated with the
driver.

Fix the checkpatch.pl issues:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up ni_660x_read_register()

Rename this function to help shorten some of the long lines.

Remove the inline, let the compiler figure it out.

Change the 'unsigned' parameters to 'unsigned int' to fix the
checkpatch.pl issues:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up ni_660x_write_register()

Rename this function to help shorten some of the long lines.

Remove the inline, let the compiler figure it out.

Change the 'unsigned' parameters to 'unsigned int' to fix the
checkpatch.pl issues:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: cleanup the NI660X_GLOBAL_INT_{STATUS, CFG}

Remove the enums global_interrupt_{status,config}_register_bits and
add defines for the CamelCase values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: cleanup the NI660X_DMA_CFG register helpers

The BUG_ON() checks in the helper functions are not necessary. The mite
driver quiries the PCI chip to determine the number of DMA channels.
This is then used when a DMA channel is requested so the channel will
always be in range.

Convert the inline functions used to set the bits in the NI600X_DMA_CFG
register into macros. Also convert the associated enum dma_selection.
This clarifies the association with the register.

Rename the associated 'dma_configuration_soft_copies' member of the
private data to allow shorting some of the ugly long lines in the
driver.

This also fixes a number of checkpatch.pl issues about:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove enum clock_config_register_bits

Remove this enum and add a define for the bit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: tidy up multi-line comment

Reformat the multi-line comment in the kernel CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: cleanup the NI660X_IO_CFG register helpers

Convert the inline functions used to set the bits in the NI600X_IO_CFG
registers into macros. Also convert the enum ni_660x_pfi_output_select
into defines. This clarifies the association with the register.

This also fixes a number of checkpatch.pl issues about:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: rename CamelCase 'NI_660xRegisterData'

Rename this CamelCase struct and the associated 'registerData' variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove enum ni_660x_register_direction

This enum is used to define the, unused, 'direction' of each register
in struct NI_660xRegisterData. Remove the unused member, as well as
the enum.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove enum ni_register_width

All the registers are defined struct NI_660xRegisterData and they are
either 2 or 4 bytes in size. Remove the enum and just use a char member
to define the size as 2 or 4 bytes.

Simplify the ni_660x_{write,read}_register() functions and remove the
unnecessary BUG() in each.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: remove struct NI_660xRegisterData 'name'

This member of the struct is not used, and just takes up space. Remove it.
Instead, add the enum ni_660x_register indexes to the table to clarify, and
document, the entries.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_660x: change IOConfigReg() into a macro

The BUG_ON() in this function is unnecessary. The 'pfi_channel' will
always be in range of the subdevice 'n_chan' (NUM_PFI_CHANNELS) which
will return a valid 'reg'.

Convert the inline function into a simple macro.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unused local variable

This patch removes unused local variable.
This variable is operation definition that back off from sending packets
for some time.
However, that has been deleted operation code.
That is removes all relative code.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes define USE_TX_BACKOFF_DELAY_IF_NO_BUFFERS

This patch removes define USE_TX_BACKOFF_DELAY_IF_NO_BUFFERS and
use it's feature codes.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unused define

This patch removes unused define.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replaces memcmp with ether_addr_equal_unaligned

This patch replaces memcmp with ether_addr_equal_unaligned.
Warning reported by checkpatch.pl
 - Prefer ether_addr_equal() or ether_addr_equal_unaligned() over memcmp()

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unused debug flags

This patch removes unused debug flags.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes unused dead codes

This patch removes unused dead codes that define custom feature.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replaces frame_type with type of struct frame_reg

This patch replaces frame_type with type of struct frame_reg.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replaces g_struct_frame_reg with frame_reg

This patch replaces g_struct_frame_reg with frame_reg.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes typedef of struct struct_frame_reg

This patch removes typedef of struct struct_frame_reg.
Renames the struct_frame_reg to frame_reg as well.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_frame_register: removes unused hif_drv

This patch removes unused hif_drv of wilc_frame_register function.
It's perform an unnecessary null check and debug print log.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: removes WIRELESS_EXT

This patch removes WIRELESS_EXT.
Does not used the WIRELESS_EXT define.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use completion instead of struct semaphore hif_sema_driver

struct semaphore hif_sema_driver is used to signal completion of host
interface message. This patch replaces struct semaphore hif_sema_driver
with struct completion hif_driver_comp. It is better to use completion
than semaphore for this case.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use completion instead of struct semaphore hif_sema_thread

struct semaphore hif_sema_thread is used to signal completion of host
interface thread. This patch replaces struct semaphore hif_sema_thread
with struct completion hif_thread_comp. It is better to use completion
than semaphore for this case.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: include: changed 'v' variable to 'state'

The argument for ULTRA_CHANNELCLI_STRING is supposed to be
an integer representing the channel state. 'state' is a more
descriptive variable name for this.

Signed-off-by: Alexander Curtin <alexander.curtin@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>