Rusty Russell [Fri, 20 Jul 2007 12:12:56 +0000 (22:12 +1000)]
lguest: trivial: We now have asm/processor-flags.h, so use it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rusty Russell [Fri, 20 Jul 2007 12:11:13 +0000 (22:11 +1000)]
lguest: fix sense if IF flag on interrupt injection
The sense of the IF bit is backwards in the host interrupt handling.
This means we always save "IF=1" on the stack when injecting an
interrupt. It turns out this is almost always correct (unless the
guest is taking a page fault in an interrupt due to an unpopulated
vmalloc mapping), so went unnoticed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Fri, 20 Jul 2007 09:59:41 +0000 (10:59 +0100)]
AFS: Use patched rxrpc_kernel_send_data() correctly
Fix afs_send_simple_reply() to accept a greater-than-zero return value from
rxrpc_kernel_send_data() as being a successful return rather than thinking it
an error and aborting the call.
rxrpc_kernel_send_data() previously returned zero incorrectly when it worked
successfully, but has been patched to return the number of bytes it
transmitted.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 Jul 2007 15:52:53 +0000 (08:52 -0700)]
Merge /pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (26 commits)
sh: intc - add support for SH7750 and its variants
sh: Move entry point code to .text.head.
sh: heartbeat: Shut up resource size warning.
sh: update r2d defconfig and fix SH7751R pci compliation
sh: Many symbol exports for nommu allmodconfig.
sh: zero terminate 8250 platform data for r2d board
sh: cpufreq: Fix up the build for SH-2.
sh: Make on-chip DMA channel selection explicit.
sh: Fix up CPU dependencies for on-chip DMAC.
sh: cpufreq: clock framework support.
sh: Support rate rounding for SH7722 FRQCR clocks.
sh: Implement clk_round_rate() in the clock framework.
sh: Fix up PCI section mismatch warnings.
sh: Wire up fallocate() syscall.
sh: intc - add support for 7780
sh: intc - improve group support
sh: Fix up SH-3 and SH-4 driver dependencies.
sh: push-switch: Correct license string.
sh: cpufreq: Fix driver dependencies and flag as broken.
sh: IPR/INTC2 IRQ setup consolidation.
...
Linus Torvalds [Fri, 20 Jul 2007 15:52:06 +0000 (08:52 -0700)]
Merge branch 'linus' of /linux/kernel/git/perex/alsa
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (102 commits)
[ALSA] version 1.0.14
[ALSA] remove duplicate Logitech Quickcam USB ID in usbquirks.h
[ALSA] hda-codec - Fix input with STAC92xx
[ALSA] hda-intel: support for iMac 24'' released on 09/2006
[ALSA] hda-codec - Add quirk for Asus P5LD2
[ALSA] snd-ca0106: Add support for X-Fi Extreme Audio.
[ALSA] snd-emu10k1:Enable E-Mu 1616m notebook firmware loading.
[ALSA] snd-emu10k1: Initial support for E-Mu 1616 and 1616m.
[ALSA] cs46xx - Fix PM resume
[ALSA] hda: Enable SPDIF in/out on some stac9205 boards
[ALSA] timer: check for incorrect device state in non-debug compiles, too
[ALSA] snd-aoa-codec-onyx: fix typo
[ALSA] hda-codec - Add quirks for HP dx2200/dx2250
[ALSA] hda-codec - Rename HP model-specific quirks
[ALSA] hda-codec - Add quirk for HP Samba
[ALSA] hda-codec - Add LG LW20 line-in capture source
[ALSA] usb-audio - Fix AC3 with M-Audio Audiophile USB
[ALSA] hda: stac9202 mixer fix
[ALSA] Make s3c24xx_i2s_set_clkdiv() change the correct bits
[ALSA] hda-codec - Add LG LW20 si3054 modem id
...
Linus Torvalds [Fri, 20 Jul 2007 15:51:11 +0000 (08:51 -0700)]
Merge /pub/scm/linux/kernel/git/lethal/sh64-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
sh64: Flag sh64_get_page() as __init_refok.
sh64: Move entry point code to .text.head.
sh64: Fix up PCI section mismatch warnings.
sh64: Update cayman defconfig.
sh64: Wire up fallocate() syscall.
Linus Torvalds [Fri, 20 Jul 2007 15:50:49 +0000 (08:50 -0700)]
Merge branch 'cfq' of git://git.kernel.dk/data/git/linux-2.6-block
* 'cfq' of git://git.kernel.dk/data/git/linux-2.6-block:
cfq: Write-only stuff in CFQ data structures
cfq: async queue allocation per priority
Nick Piggin [Fri, 20 Jul 2007 07:21:06 +0000 (09:21 +0200)]
arm: fix up handle_mm_fault changes
Update arm to use bitwise types for its VM_FAULT_ constants.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 Jul 2007 15:46:42 +0000 (08:46 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (29 commits)
libata: implement EH fast drain
libata: schedule probing after SError access failure during autopsy
libata: clear HOTPLUG flag after a reset
libata: reorganize ata_ehi_hotplugged()
libata: improve SCSI scan failure handling
libata: quickly trigger SATA SPD down after debouncing failed
libata: improve SATA PHY speed down logic
The SATA controller device ID is different according to
ahci: implement SCR_NOTIFICATION r/w
ahci: make NO_NCQ handling more consistent
libata: make ->scr_read/write callbacks return error code
libata: implement AC_ERR_NCQ
libata: improve EH report formatting
sata_sil24: separate out sil24_do_softreset()
sata_sil24: separate out sil24_exec_polled_cmd()
sata_sil24: replace sil24_update_tf() with sil24_read_tf()
ahci: separate out ahci_do_softreset()
ahci: separate out ahci_exec_polled_cmd()
ahci: separate out ahci_kick_engine()
ahci: use deadline instead of fixed timeout for 1st FIS for SRST
...
Matthew Wilcox [Fri, 20 Jul 2007 15:29:50 +0000 (09:29 -0600)]
Fix Lindent to not indent preprocessor comments so far
I recently ran Lindent over the AdvanSys driver and it moved the
comments on #else and #endif lines way over to the right:
#else /* ADVANSYS_DEBUG */
This doesn't match what I expect from kernel style, but it is
documented. We just need another flag to indent to make this look like:
#else /* ADVANSYS_DEBUG */
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Juhl [Fri, 20 Jul 2007 07:31:48 +0000 (00:31 -0700)]
Memory leak in tpm_ascii_bios_measurements_open()
Coverity found a memory leak in tpm_ascii_bios_measurements_open().
If "read_log(log)" fails, then we may leak 'log' and
'log->bios_event_log'.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Seiji Munetoh <munetoh@jp.ibm.com>
Cc: Stefan Berger <stefanb@us.ibm.com>
Cc: Reiner Sailer <sailer@watson.ibm.com>
Cc: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Ungerer [Fri, 20 Jul 2007 07:31:47 +0000 (00:31 -0700)]
m68knommu: reformat show_cpuinfo()
Reformat show_cpuinfo() to be consistent with normal coding style
(and rest of this file).
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jesper Juhl [Fri, 20 Jul 2007 07:31:47 +0000 (00:31 -0700)]
cr_backlight_probe() allocates too little storage for struct cr_panel
The Coverity checker noticed that we allocate too little storage for
"struct cr_panel *crp" in cr_backlight_probe().
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Thomas Hellstrom <thomas@tungstengraphics.com>
Cc: Alan Hourihane <alanh@tungstengraphics.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Fri, 20 Jul 2007 07:31:46 +0000 (00:31 -0700)]
async_tx: fix kmap_atomic usage in async_memcpy
Andrew Morton:
[async_memcpy] is very wrong if both ASYNC_TX_KMAP_DST and
ASYNC_TX_KMAP_SRC can ever be set. We'll end up using the same kmap
slot for both src add dest and we get either corrupted data or a BUG.
Evgeniy Polyakov:
Btw, shouldn't it always be kmap_atomic() even if flag is not set.
That pages are usual one returned by alloc_page().
So fix the usage of kmap_atomic and kill the ASYNC_TX_KMAP_DST and
ASYNC_TX_KMAP_SRC flags.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stephen Rothwell [Fri, 20 Jul 2007 07:31:45 +0000 (00:31 -0700)]
dpt_i2o depends on virt_to_bus
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nick Piggin [Fri, 20 Jul 2007 07:31:45 +0000 (00:31 -0700)]
fix some conversion overflows
Fix page index to offset conversion overflows in buffer layer, ecryptfs,
and ocfs2.
It would be nice to convert the whole tree to page_offset, but for now
just fix the bugs.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paul Mundt [Fri, 20 Jul 2007 07:31:44 +0000 (00:31 -0700)]
mm: fix memory hotplug oops from ZONE_MOVABLE changes.
zone_movable_pfn is presently marked as __initdata and referenced from
adjust_zone_range_for_zone_movable(), which in turn is referenced by
zone_spanned_pages_in_node(). Both of these are __meminit annotated. When
memory hotplug is enabled, this will oops on a hot-add, due to
zone_movable_pfn having been freed.
__meminitdata annotation gives the desired behaviour.
This will only impact platforms that enable both memory hotplug
and ARCH_POPULATES_NODE_MAP.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adrian Bunk [Fri, 20 Jul 2007 07:31:44 +0000 (00:31 -0700)]
arch/i386/xen/events.c should #include <asm/xen/hypervisor.h>
Every file should include the headers containing the prototypes for
its global functions.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roland McGrath [Fri, 20 Jul 2007 07:31:43 +0000 (00:31 -0700)]
xen: disable vdso "nosegneg" on native boot
One of the nice ideas behind paravirt is that CONFIG_XEN=y can be included
in a standard configuration and be no worse for native booting than as a
Xen guest. The glibc feature that supports the vDSO "nosegneg" note is
designed specifically to make this easy. You just have to flip one bit at
boot time. This patch makes Xen flip the bit, so a CONFIG_XEN=y kernel on
bare hardware does not make glibc use the less-optimized library builds.
Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 Jul 2007 15:26:54 +0000 (08:26 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
[SPARC64]: Fix two year old bug in early bootup asm.
[SPARC64]: Update defconfig.
[SPARC64]: Fix log message type in vio_create_one().
[SPARC64]: Tweak assertions in sun4v_build_virq().
[SPARC64]: Tweak kernel log messages in power_probe().
[SPARC64]: Fix handling of multiple vdc-port nodes.
[SPARC64]: Fix device type matching in VIO's devspec_show().
[SPARC64]: Fix MODULE_DEVICE_TABLE() specification in VDC and VNET.
[SPARC]: Add sys_fallocate() entries.
[SPARC64]: Use orderly_poweroff().
Linus Torvalds [Fri, 20 Jul 2007 15:25:49 +0000 (08:25 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (44 commits)
USB: drivers/usb/storage/dpcm.c whitespace cleanup
USB: r8a66597-hcd: fixes some problem
USB: change name of spinlock in hcd.c
USB: move routines in hcd.c
USB: misc: uss720: clean up urb->status usage
USB: misc: usbtest: clean up urb->status usage
USB: misc: usblcd: clean up urb->status usage
USB: misc: phidgetmotorcontrol: clean up urb->status usage
USB: misc: phidgetkit: clean up urb->status usage
USB: misc: legousbtower: clean up urb->status usage
USB: misc: ldusb: clean up urb->status usage
USB: misc: iowarrior: clean up urb->status usage
USB: misc: ftdi-elan: clean up urb->status usage
USB: misc: auerswald: clean up urb->status usage
USB: misc: appledisplay: clean up urb->status usage
USB: misc: adtux: clean up urb->status usage
USB: core: message: clean up urb->status usage
USB: image: microtek: clean up urb->status usage
USB: image: mdc800: clean up urb->status usage
USB: storage: onetouch: clean up urb->status usage
...
Al Viro [Fri, 20 Jul 2007 15:18:06 +0000 (16:18 +0100)]
fix gfp_t annotations for slub
Since we have use like ~SLUB_DMA, we ought to have the type
set right in both cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 15:15:28 +0000 (16:15 +0100)]
ANSIfy a couple of functions in netfilter
It's C, not C++...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 15:10:24 +0000 (16:10 +0100)]
Fix lguest misannotation
It's void __user *, not void * __user...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 15:07:33 +0000 (16:07 +0100)]
Fix up sky2 breakage
Doing |= 1 << 19 to 16bit unsigned is not particulary useful;
that register is 32bit, unlike the ones dealt with in the rest of
function, so we need u32 variable here.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 15:03:40 +0000 (16:03 +0100)]
Fix buggered kmalloc() call argument order
Wrong order of arguments
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 03:33:58 +0000 (04:33 +0100)]
m68k: exclude more unbuildable drivers
anything that wants working dma-mapping won't work
parport_pc won't work on m68k unless we have ISA
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 03:33:48 +0000 (04:33 +0100)]
mac89x0: missing __init
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 03:33:38 +0000 (04:33 +0100)]
m68k: remove empty ->setup is several consoles
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 03:33:28 +0000 (04:33 +0100)]
m68k: missing __init
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 03:33:18 +0000 (04:33 +0100)]
m68k: missing exports
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 03:33:08 +0000 (04:33 +0100)]
m68k: use .text.head
i.e. tell modpost that entry point code (that has to be outside
of .init.text for external reasons) is OK to refer to .init.*
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 03:32:58 +0000 (04:32 +0100)]
m68k iomem (based on Geert's tree + memcpy_... stuff)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Fri, 20 Jul 2007 03:32:48 +0000 (04:32 +0100)]
m68k: teach modpost about .m68_fixup
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Thu, 19 Jul 2007 23:24:22 +0000 (00:24 +0100)]
more isa/eisa/pci-only drivers marked as such
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:41 +0000 (14:29 +0900)]
libata: implement EH fast drain
In most cases, when EH is scheduled, all in-flight commands are
aborted causing EH to kick in immediately. However, in some cases
(especially with PMP), it's unclear which commands are affected by the
error condition and although aborting all in-flight commands work, it
isn't optimal and may cause unnecessary disruption. On the other
hand, waiting for in-flight commands to drain themselves can take up
to 30seconds.
This patch implements EH fast drain to handle such situations. It
gives in-flight commands some time to finish up but doesn't wait for
too long. After EH is scheduled, fast drain timer is started and if
no other completion occurs in ATA_EH_FASTDRAIN_INTERVAL all in-flight
commands are aborted. If any completion occurred in the interval, the
port is given another interval to finish up itself.
Currently ATA_EH_FASTDRAIN_INTERVAL is 3 secs which should be enough
for finishing up most commands.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:41 +0000 (14:29 +0900)]
libata: schedule probing after SError access failure during autopsy
If SError isn't accessible, EH can't tell whether hotplug has happened
or not. Report SError read failure with AC_ERR_OTHER and schedule
probing with hardreset. This will be mainly useful for PMPs.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:41 +0000 (14:29 +0900)]
libata: clear HOTPLUG flag after a reset
ATA_EHI_HOTPLUGGED is a hint for reset functions indicating the the
port might have gone through hotplug/unplug just before entering EH.
Reset functions modify their behaviors a bit to handle the situation
better - e.g. using longer debouncing delay.
Currently, once HOTPLUG is set, it isn't cleared till the end of EH.
This is unnecessary and makes EH take longer. Clear the HOTPLUGGED
flag after a reset try (successful or not).
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:40 +0000 (14:29 +0900)]
libata: reorganize ata_ehi_hotplugged()
__ata_ehi_hotplugged() now has no users. Regorganize
ata_ehi_hotplugged() such that a new function ata_ehi_schedule_probe()
deals with scheduling probing. ata_ehi_hotplugged() calls it and
additionally marks hotplug specific flags. ata_ehi_schedule_probe()
will be used laster.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:40 +0000 (14:29 +0900)]
libata: improve SCSI scan failure handling
SCSI scan may fail due to memory allocation failure even if EH is not
in progress. Due to use of GFP_ATOMIC in SCSI scan path, allocation
failure isn't too rare especially while probing multiple devices at
once which is the case when a bunch of devices are connected to PMP.
This patch moves SCSI scan failure detetion logic from
ata_scsi_hotplug() to ata_scsi_scan_host() and implement synchronous
scan behavior. The synchronous path sleeps briefly and repeats SCSI
scan if some devices aren't attached properly. It contains robust
retry loop to minimize the chance of device misdetection during boot
and falls back to async retry if everything fails.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:40 +0000 (14:29 +0900)]
libata: quickly trigger SATA SPD down after debouncing failed
Debouncing failure is a good indicator of basic link problem. Use
-EPIPE to indicate debouncing failure and make ata_eh_reset() invoke
sata_down_spd_limit() if the error occurs during reset.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:40 +0000 (14:29 +0900)]
libata: improve SATA PHY speed down logic
sata_down_spd_limit() first reads the current SPD from SStatus and
limit the speed to the lower one of one below the current limit or one
below the current SPD in SStatus. SPD may not be accessible or valid
when SPD down is requested making sata_down_spd_limit() fail when it's
most needed.
This patch makes the current SPD cached after each successful reset
and forces GEN I speed (1.5Gbps) if neither of SStatus or the cached
value is valid, so sata_down_spd_limit() is now guaranteed to lower
the speed limit if lower speed is available.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
su henry [Fri, 20 Jul 2007 12:07:46 +0000 (08:07 -0400)]
The SATA controller device ID is different according to
the onchip SATA type set in the system BIOS:
Device Device ID
SATA in IDE mode 0x4390
SATA in AHCI mode 0x4391
SATA in non-raid5 driver 0x4392
SATA in raid5 driver 0x4393
Although the device ID is different, they use the same AHCI driver
.The attached file is the patch for adding these device
IDs for ATI SB700.
Signed-off-by: henry.su.ati@gmail.com
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:40 +0000 (14:29 +0900)]
ahci: implement SCR_NOTIFICATION r/w
Make ahci_scr_read/write() handle SCR_NOTIFICATION if the controller
supports it. Also, print "sntf" in the cap line if supported.
While at it, convert eight space into a tab in ahci_print_info().
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:40 +0000 (14:29 +0900)]
ahci: make NO_NCQ handling more consistent
ahci_save_initial_config() is responsible for reading, screening the
host CAP register and storing the modified result into hpriv->cap for
the rest of the driver. Move ATA_FLAG_NO_NCQ handling into
ahci_save_initial_config(). It's more consistent this way and the
rest of the driver can always refer to hpriv->cap to determine
configured capability.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:40 +0000 (14:29 +0900)]
libata: make ->scr_read/write callbacks return error code
Convert ->scr_read/write callbacks to return error code to better
indicate failure. This will help handling of SCR_NOTIFICATION.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:40 +0000 (14:29 +0900)]
libata: implement AC_ERR_NCQ
When an NCQ command fails, all commands in flight are aborted and the
offending one is reported using log page 10h. Depending on controller
characteristics and LLD implementation, all commands may appear as
having a device error due to shared TF status making it hard to
determine what's actually going on.
This patch adds AC_ERR_NCQ, marks the command reported by log page 10h
with it and print extra "<F>" after the error report for the command
to help distinguishing the offending command.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:39 +0000 (14:29 +0900)]
libata: improve EH report formatting
Requiring LLDs to format multiple error description messages properly
doesn't work too well. Help LLDs a bit by making ata_ehi_push_desc()
insert ", " on each invocation. __ata_ehi_push_desc() is the raw
version without the automatic separator.
While at it, make ehi_desc interface proper functions instead of
macros.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:39 +0000 (14:29 +0900)]
sata_sil24: separate out sil24_do_softreset()
Separate out sil24_do_softreset() which takes @pmp as its last
argument. This will be used to implement sil24_pmp_softreset().
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:39 +0000 (14:29 +0900)]
sata_sil24: separate out sil24_exec_polled_cmd()
Separate out sil24_exec_polled_cmd() from sil24_softreset(). This
will be used to implement sil24_pmp_read/write().
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:39 +0000 (14:29 +0900)]
sata_sil24: replace sil24_update_tf() with sil24_read_tf()
Replace sil24_update_tf() to sil24_read_tf() which reads TF into
passed int result TF argument and can read TFs of PMP links. This
will be used by PMP support.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:39 +0000 (14:29 +0900)]
ahci: separate out ahci_do_softreset()
Separate out ahci_do_softreset() which takes @pmp as its last
argument. This will be used to implement ahci_pmp_softreset().
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:39 +0000 (14:29 +0900)]
ahci: separate out ahci_exec_polled_cmd()
Separate out ahci_exec_polled_cmd() from ahci_softreset(). This will
be used to implement ahci_pmp_read/write(). ahci_exec_polled_cmd()
performs reset_engine before returning if the command fails (times
out). This is to improve robustness.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:39 +0000 (14:29 +0900)]
ahci: separate out ahci_kick_engine()
Separate out stop_engine - CLO - start_engine sequence from
ahci_softreset() and ahci_clo() into ahci_reset_engine() and use it in
ahci_softreset() and ahci_post_internal_cmd(). The function will also
be used to prepare for and clean up after PMP register access
commands.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:38 +0000 (14:29 +0900)]
ahci: use deadline instead of fixed timeout for 1st FIS for SRST
Use deadline instead of fixed timeout for 1st FIS for SRST to improve
robustness of SRST.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Mon, 16 Jul 2007 05:29:38 +0000 (14:29 +0900)]
libata: add @is_cmd to ata_tf_to_fis()
Add @is_cmd to ata_tf_to_fis(). This controls bit 7 of the second
byte which tells the device whether this H2D FIS is for a command or
not. This cleans up ahci a bit and will be used by PMP.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Petr Vandrovec [Fri, 20 Jul 2007 11:44:44 +0000 (07:44 -0400)]
[libata] Fix reported task file values in sense data
ata_tf_read was setting HOB bit when lba48 command was submitted, but
was not clearing it before reading "normal" data. As it is only place
which sets HOB bit in control register, and register reads should not
be affected by other bits, let's just clear it when we are done with
reading upper bytes so non-48bit commands do not have to touch ctl
at all.
pata_scc suffered from same problem...
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Dave Jones [Mon, 16 Jul 2007 15:23:03 +0000 (11:23 -0400)]
Correct comment in libata-sff.c
The filename in the file header is incorrect.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Akira Iguchi [Tue, 17 Jul 2007 03:10:17 +0000 (12:10 +0900)]
pata_scc.c: small fixes (Workaround for errata A308)
This patch fixes some issues of the previous patch:
- Use mode_filter() hook to limit ATAPI UDMA mode
- "data loss" warning message
- handling of udma_mask
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Alexey Dobriyan [Tue, 17 Jul 2007 19:48:48 +0000 (23:48 +0400)]
ahci.c: fix CONFIG_PM=n compilation
Commit
df69c9c5438b4e396a64d42608b2a6c48a3e7475 moved only prototype of
out of CONFIG_PM. Move function out as well. Box seems to boot fine.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Tejun Heo [Fri, 20 Jul 2007 03:49:38 +0000 (12:49 +0900)]
libata: add ST9160821AS 3.CLF to NONCQ blacklist
Yay, the first one from Seagate. 3.ALC firmware is okay. This was
reported by Sam Freed on bugzilla bug 8759.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Sam Freed <sam@freed.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Magnus Damm [Fri, 20 Jul 2007 03:50:58 +0000 (12:50 +0900)]
pata_platform: Fix NULL pointer dereference
pata_platform: Fix NULL pointer dereference
pata_platform currently dereferences a NULL pointer in pata_platform_probe()
if pdev->dev.platform_data is set to NULL. This breakage was most likely
introduced by commit
5f45bc50976ee1f408f7171af155aec646655a37.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Fri, 13 Jul 2007 21:06:45 +0000 (17:06 -0400)]
[libata] sata_mv: minor cleanups
* trim trailing whitespace
* document some flags, registers, and register bits
* fix locking around EDMA on/off and configuration
* continue replacing "constant OP var" with "var OP constant"
* use new pci_try_set_mwi()
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Jeff Garzik [Fri, 13 Jul 2007 19:20:15 +0000 (15:20 -0400)]
[libata] sata_mv: Micro-optimization and cleanups
* Micro-optimization in the EDMA interrupt handling code
* s/EDMA_ERR_CRBQ_PAR/EDMA_ERR_CRQB_PAR/
* Document EDMA Error Interrupt Cause register bits
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Magnus Damm [Fri, 20 Jul 2007 09:44:49 +0000 (18:44 +0900)]
sh: intc - add support for SH7750 and its variants
This patch converts the cpu specific 7750 setup code to use the
new intc controller. Many new vectors are added and multiple
processor variants including 7091, 7750, 7750s, 7750r, 7751 and
7751r should all have the correct vectors hooked up.
IRLM interrupts can be enabled using ipr_irq_enable_irlm() which
now is marked as __init.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Jaroslav Kysela [Fri, 20 Jul 2007 09:13:35 +0000 (11:13 +0200)]
[ALSA] version 1.0.14
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Jaroslav Kysela perex@suse.cz [Fri, 20 Jul 2007 08:42:56 +0000 (10:42 +0200)]
[ALSA] remove duplicate Logitech Quickcam USB ID in usbquirks.h
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Tue, 29 May 2007 16:01:06 +0000 (18:01 +0200)]
[ALSA] hda-codec - Fix input with STAC92xx
The recent fix for STAC92xx surround outputs broke the input pin
setting for shared line-in and mic jacks. This patch fixes the
breakage.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Nicola Fagnani [Thu, 19 Jul 2007 21:28:52 +0000 (23:28 +0200)]
[ALSA] hda-intel: support for iMac 24'' released on 09/2006
Basic audio support for the iMac 24'' model released on 09/2006,
including
headphone jack detection with automatic speaker muting.
This iMac uses the Realtek ALC885 codec, not a Sigmatel one as in
other models.
Functionality has been tested for internal speakers, headphone and
microphone.
Signed-off-by: Nicola Fagnani <nicfagn@iol.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Claudio Matsuoka [Thu, 19 Jul 2007 21:18:32 +0000 (23:18 +0200)]
[ALSA] hda-codec - Add quirk for Asus P5LD2
Without the proper model setting, the Asus P5LD2 rear outputs remain
completely silent unlike other systems where the front speakers usually
work. This patch adds the P5LD2 to the quirk table.
Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Fri, 18 May 2007 19:35:50 +0000 (20:35 +0100)]
[ALSA] snd-ca0106: Add support for X-Fi Extreme Audio.
This card is just a normal SB Live 24bit,
but under a different marketing name.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Sat, 14 Jul 2007 09:24:49 +0000 (10:24 +0100)]
[ALSA] snd-emu10k1:Enable E-Mu 1616m notebook firmware loading.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
James Courtier-Dutton [Sat, 14 Jul 2007 01:18:26 +0000 (02:18 +0100)]
[ALSA] snd-emu10k1: Initial support for E-Mu 1616 and 1616m.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Thu, 19 Jul 2007 09:23:21 +0000 (11:23 +0200)]
[ALSA] cs46xx - Fix PM resume
Fixed PM resume of cs46xx devices. It now restores properly the DSP
image and kick-off the DSP.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Matthew Ranostay [Tue, 17 Jul 2007 09:52:24 +0000 (11:52 +0200)]
[ALSA] hda: Enable SPDIF in/out on some stac9205 boards
Added support for some boards with SPDIF in/out, and cleaned up the GPIO
enable function.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Clemens Ladisch [Mon, 16 Jul 2007 09:01:30 +0000 (11:01 +0200)]
[ALSA] timer: check for incorrect device state in non-debug compiles, too
Convert the snd_assert()s to simple if()s to prevent crashes when one of
the timer instance ioctls is called before the file is bound to a timer
device.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Yoann Padioleau [Fri, 13 Jul 2007 22:33:15 +0000 (00:33 +0200)]
[ALSA] snd-aoa-codec-onyx: fix typo
Parse error in ifdef or bad use of macro.
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Claudio Matsuoka [Fri, 13 Jul 2007 22:26:16 +0000 (00:26 +0200)]
[ALSA] hda-codec - Add quirks for HP dx2200/dx2250
HP dx2200 and dx2250 use Micro-Star International (MSI) motherboards
(models MS-7254 and MS-7297 respectively) with an ALC862 codec in
threestack configuration. Adding this quirk allows correct 5.1 sound
output in these systems.
Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Claudio Matsuoka [Fri, 13 Jul 2007 12:36:19 +0000 (14:36 +0200)]
[ALSA] hda-codec - Rename HP model-specific quirks
Rename ALC888_HP_NETTLE and ALC888_HP_LUCKNOW models to the more generic
names ALC888_6ST_HP and ALC888_3ST_HP since HP seems to be consistent
in the wiring of their 3stack and 6stack ALC888-based systems.
Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Claudio Matsuoka [Fri, 13 Jul 2007 09:51:32 +0000 (11:51 +0200)]
[ALSA] hda-codec - Add quirk for HP Samba
This patch fixes 5.1 surround output for the HP Samba using the same
quirk as the HP Lucknow. If HP machines are uniform in their wiring,
we should rename ALC888_HP_NETTLE to ALC888_6ST_HP and ALC888_HP_LUCKNOW
to ALC888_3ST_HP for generic HP 6stack and 3stack configurations.
Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Claudio Matsuoka [Fri, 13 Jul 2007 09:51:06 +0000 (11:51 +0200)]
[ALSA] hda-codec - Add LG LW20 line-in capture source
Add line-in to the list of LG LW20 capture sources. Also fix the LG LW
pin assignment list comment.
Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Thibault Le Meur [Fri, 13 Jul 2007 09:50:23 +0000 (11:50 +0200)]
[ALSA] usb-audio - Fix AC3 with M-Audio Audiophile USB
Fixed AC3 interface in device_setup=0x00 mode thanks to Hakan
Lennestal and updated documentation
Signed-off-by: Thibault Le Meur <Thibault.LeMeur@supelec.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Matthew Ranostay [Thu, 12 Jul 2007 13:17:34 +0000 (15:17 +0200)]
[ALSA] hda: stac9202 mixer fix
Added support for line out controls for STAC9202 cards, and fixed issue
where master mixer control was being created twice for headphone and
speaker outs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Matt Reimer [Thu, 12 Jul 2007 10:27:24 +0000 (12:27 +0200)]
[ALSA] Make s3c24xx_i2s_set_clkdiv() change the correct bits
Make s3c24xx_i2s_set_clkdiv() change the correct bits.
Signed-off-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Claudio Matsuoka [Thu, 12 Jul 2007 09:27:37 +0000 (11:27 +0200)]
[ALSA] hda-codec - Add LG LW20 si3054 modem id
Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Thibault Le Meur [Thu, 12 Jul 2007 09:26:35 +0000 (11:26 +0200)]
[ALSA] usb-audio - Fix audiophile-USB quirk for little-endian
Audiophile-usb fix (corrects little-endianness in 16bit
modes, resets interfaces at device initialization, and updates the
documentation).
Signed-off-by: Thibault Le Meur <Thibault.LeMeur@supelec.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Claudio Matsuoka [Wed, 11 Jul 2007 08:31:08 +0000 (10:31 +0200)]
[ALSA] hda-codec - Add VIA HDA to si3054
Add VIA HDA identification to use the HDA-based Motorola modem of
the Clevo m540 laptop.
Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Tobin Davis [Tue, 10 Jul 2007 15:04:57 +0000 (17:04 +0200)]
[ALSA] HDA-Intel - Add support for MSI K9AGM2-FIH motherboard
This patch adds support for the MSI K9AGM2-FIH on-board audio.
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Ritesh Raj Sarraf [Tue, 10 Jul 2007 11:03:57 +0000 (13:03 +0200)]
[ALSA] USB ID for intergrated quickcam on dell xps m1210
This patch adds Logitech QuickCam USB ID for Dell's
XPS M1210 notebooks.
Signed-off-by: Ritesh Raj Sarraf <rrs@researchut.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Adrian Bunk [Tue, 10 Jul 2007 09:34:32 +0000 (11:34 +0200)]
[ALSA] fix SND_CS5530=y, ISA=n compilation
This patch fixes the following compile error with
CONFIG_SND_CS5530=y, CONFIG_ISA=n:
<-- snip -->
...
LD .tmp_vmlinux1
sound/built-in.o: In function 'snd_sb16_capture_trigger':
sb16_main.c:(.text+0x212ad): undefined reference to 'snd_sbdsp_command'
sb16_main.c:(.text+0x212cc): undefined reference to 'snd_sbdsp_command'
sb16_main.c:(.text+0x212f7): undefined reference to 'snd_sbdsp_command'
sound/built-in.o: In function 'snd_sb16_playback_trigger':
sb16_main.c:(.text+0x2136d): undefined reference to 'snd_sbdsp_command'
sb16_main.c:(.text+0x2138c): undefined reference to 'snd_sbdsp_command'
...
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 9 Jul 2007 22:47:43 +0000 (00:47 +0200)]
[ALSA] hda-codec - Fix default pin config of Abit AW9D-MAX
Fix the default pin configuration of Abit AW9D-MAX. The board has a
broken BIOS that doesn't set the correct pin default configs, which
screws up the auto-configuration of snd-hda-intel driver.
The patch enables the override of default pin config values.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 9 Jul 2007 15:53:18 +0000 (17:53 +0200)]
[ALSA] hda-codec - Fix Toshiba A100 with ALC861
One of the newly added model entries causes a regression on Toshiba A100.
It works fine with model=auto. So, let's deselect the entry again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
George Shapovalov [Mon, 9 Jul 2007 08:42:35 +0000 (10:42 +0200)]
[ALSA] usb-audio: another Logitech camera/microphone ID match
From: George Shapovalov <george@gentoo.org>
Another case of ALSA ticket #3040: we need an explicit USB ID match for
another Logitech camera/microphone device.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 9 Jul 2007 08:39:44 +0000 (10:39 +0200)]
[ALSA] usbaudio - Add quirk for Roland EXR series
Added a quirk for Roland EXR series. Reported by Andre Coetzee.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Mon, 9 Jul 2007 08:36:22 +0000 (10:36 +0200)]
[ALSA] aica - fix behaviour in poor resource conditions
Fix behaviour in poor resource conditions. With this new patch,
tidied with indent and with SNDRV_PCM_TRIGGER_STOP being used.
Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Fri, 6 Jul 2007 18:22:05 +0000 (20:22 +0200)]
[ALSA] hda-intel - Show the last command in warning messages
Show the last issued command in warning messages when any communication
error with CORB/RIRB occurs.
Also, a bit code clean-up for composing the command value in
*_send_cmd().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Fri, 6 Jul 2007 16:17:04 +0000 (18:17 +0200)]
[ALSA] hda-codec - Fix number of pin widgets with STAC codecs
Use ARRAY_SIZE() to calculate the number of pin widgets for each codec
chip.
This also fixes a typo in STAC9205 code that gives a wrong number (14
instead of 12), which resulted in fatal communication errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Robert P. J. Day [Fri, 6 Jul 2007 11:27:16 +0000 (13:27 +0200)]
[ALSA] Remove unreferenced header file include/sound/wavefront_fx.h
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Fri, 6 Jul 2007 10:27:25 +0000 (12:27 +0200)]
[ALSA] Fix substream to check in PCM drain
The check of a substream in snd_pcm_drain() might not be always correct
since runtime can point a different substream (although the PCM state
of each linked substream should be same, in theory).
This patch fixes it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
Takashi Iwai [Fri, 6 Jul 2007 10:24:55 +0000 (12:24 +0200)]
[ALSA] Add missing model entries for HD-audio codecs
Added missing model entries for HD-audio codecs in the module option list.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / log