GitHub/MotorolaMobilityLLC/kernel-slsi.git
7 years agodrm/tegra: Add falcon helper library
Arto Merilainen [Wed, 14 Dec 2016 11:16:12 +0000 (13:16 +0200)]
drm/tegra: Add falcon helper library

Add a set of falcon helper routines for use by the tegradrm client drivers
of the various falcon-based engines.

The falcon is a microcontroller that acts as a frontend for the rest of a
particular Tegra engine.  In order to properly utilize these engines, the
frontend must be booted before pushing any commands.

Based on work by Andrew Chew <achew@nvidia.com>

Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
7 years agodrm/tegra: Add Tegra DRM allocation API
Mikko Perttunen [Wed, 14 Dec 2016 11:16:11 +0000 (13:16 +0200)]
drm/tegra: Add Tegra DRM allocation API

Add a new IO virtual memory allocation API to allow clients to
allocate non-GEM memory in the Tegra DRM IOMMU domain. This is
required e.g. for loading client firmware when clients are attached
to the IOMMU domain.

The allocator allocates contiguous physical pages that are then
mapped contiguously to the IOMMU domain using the iova_domain
library provided by the kernel. Contiguous physical pages are
used so that the same allocator works also when IOMMU support
is disabled and therefore devices access physical memory directly.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
7 years agodrm/tegra: Add tiling FB modifiers
Alexandre Courbot [Tue, 8 Nov 2016 07:50:42 +0000 (16:50 +0900)]
drm/tegra: Add tiling FB modifiers

Add FB modifiers to allow user-space to specify that a surface is in one
of the two tiling formats supported by Tegra chips, and add support in
the tegradrm driver to handle them properly. This is necessary for the
display controller to directly display buffers generated by the GPU.

This feature is intended to replace the dedicated IOCTL enabled
by TEGRA_STAGING and to provide a non-staging alternative to that
solution.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
7 years agodrm/tegra: Don't leak kernel pointer to userspace
Thierry Reding [Thu, 9 Mar 2017 19:04:55 +0000 (20:04 +0100)]
drm/tegra: Don't leak kernel pointer to userspace

Each open file descriptor can have any number of contexts associated
with it. To differentiate between these contexts a unique ID is required
and back when these userspace interfaces were introduced, in commit
d43f81cbaf43 ("drm/tegra: Add gr2d device"), the pointer to the context
structure was deemed adequate. However, this leaks information about
kernel internal memory to userspace, which can potentially be exploited.

Switch the context parameter to be allocated from an IDR, which has the
added benefit of providing an easy way to look up a context from its ID.

Signed-off-by: Thierry Reding <treding@nvidia.com>
7 years agodrm/tegra: Protect IOMMU operations by mutex
Thierry Reding [Thu, 9 Mar 2017 19:04:56 +0000 (20:04 +0100)]
drm/tegra: Protect IOMMU operations by mutex

IOMMU support is currently not thread-safe, which can cause crashes,
amongst other things, under certain workloads.

Signed-off-by: Thierry Reding <treding@nvidia.com>
7 years agodrm/tegra: Enable IOVA API when IOMMU support is enabled
Thierry Reding [Mon, 20 Mar 2017 19:04:20 +0000 (20:04 +0100)]
drm/tegra: Enable IOVA API when IOMMU support is enabled

When support for an IOMMU has been enabled, make sure the IOVA helper
code is also activated and the driver can properly manage the IO virtual
address space.

Signed-off-by: Thierry Reding <treding@nvidia.com>
7 years agogpu: host1x: Add IOMMU support
Mikko Perttunen [Wed, 14 Dec 2016 11:16:14 +0000 (13:16 +0200)]
gpu: host1x: Add IOMMU support

Add support for the Host1x unit to be located behind
an IOMMU. This is required when gather buffers may be
allocated non-contiguously in physical memory, as can
be the case when TegraDRM is also using the IOMMU.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
7 years agogpu: host1x: Fix potential out-of-bounds access
Thierry Reding [Thu, 9 Mar 2017 19:04:57 +0000 (20:04 +0100)]
gpu: host1x: Fix potential out-of-bounds access

The check for valid syncpoint IDs is off by one. While at it, rewrite
the check to make it more easily understandable.

Signed-off-by: Thierry Reding <treding@nvidia.com>
7 years agoMerge branch 'core' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu into...
Thierry Reding [Tue, 4 Apr 2017 17:18:07 +0000 (19:18 +0200)]
Merge branch 'core' of git://git./linux/kernel/git/joro/iommu into drm/tegra/for-next

7 years agoiommu/iova: Fix compile error with CONFIG_IOMMU_IOVA=m
Joerg Roedel [Wed, 22 Mar 2017 23:06:17 +0000 (00:06 +0100)]
iommu/iova: Fix compile error with CONFIG_IOMMU_IOVA=m

The #ifdef in iova.h only catches the CONFIG_IOMMU_IOVA=y
case, so that compilation as a module fails with duplicate
function definition errors. Fix it by catching both cases in
the #if.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
7 years agoiommu: Add dummy implementations for !IOMMU_IOVA
Thierry Reding [Mon, 20 Mar 2017 19:11:28 +0000 (20:11 +0100)]
iommu: Add dummy implementations for !IOMMU_IOVA

Currently, building code which uses the API guarded by the IOMMU_IOVA
will fail to link if IOMMU_IOVA is not enabled. Often this code will be
using the API provided by the IOMMU_API Kconfig symbol, but support for
this can be optional, with code falling back to contiguous memory. This
commit implements dummy functions for the IOVA API so that it can be
compiled out.

With both IOMMU_API and IOMMU_IOVA optional, code can now be built with
or without support for IOMMU without having to resort to #ifdefs in the
user code.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
7 years agoMAINTAINERS: Add related headers to IOMMU section
Thierry Reding [Mon, 20 Mar 2017 19:11:27 +0000 (20:11 +0100)]
MAINTAINERS: Add related headers to IOMMU section

The linux/iommu.h and linux/iova.h headers belong to the IOMMU subsystem
but scripts/get_maintainers.pl currently fails to assign them because
they aren't listed in MAINTAINERS.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
7 years agoiommu/iova: Consolidate code for adding new node to iovad domain rbtree
Marek Szyprowski [Fri, 24 Feb 2017 11:13:37 +0000 (12:13 +0100)]
iommu/iova: Consolidate code for adding new node to iovad domain rbtree

This patch consolidates almost the same code used in iova_insert_rbtree()
and __alloc_and_insert_iova_range() functions. While touching this code,
replace BUG() with WARN_ON(1) to avoid taking down the whole system in
case of corrupted iova tree or incorrect calls.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
7 years agoLinux 4.11-rc3
Linus Torvalds [Mon, 20 Mar 2017 02:09:39 +0000 (19:09 -0700)]
Linux 4.11-rc3

7 years agomm/swap: don't BUG_ON() due to uninitialized swap slot cache
Linus Torvalds [Mon, 20 Mar 2017 02:00:47 +0000 (19:00 -0700)]
mm/swap: don't BUG_ON() due to uninitialized swap slot cache

This BUG_ON() triggered for me once at shutdown, and I don't see a
reason for the check.  The code correctly checks whether the swap slot
cache is usable or not, so an uninitialized swap slot cache is not
actually problematic afaik.

I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
I'm not sure why that seemingly pointless check was there.  I suspect
the real fix is to just remove it entirely, but for now we'll warn about
it but not bring the machine down.

Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoMerge tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Mon, 20 Mar 2017 01:49:28 +0000 (18:49 -0700)]
Merge tag 'powerpc-4.11-5' of git://git./linux/kernel/git/powerpc/linux

Pull more powerpc fixes from Michael Ellerman:
 "A couple of minor powerpc fixes for 4.11:

   - wire up statx() syscall

   - don't print a warning on memory hotplug when HPT resizing isn't
     available

  Thanks to: David Gibson, Chandan Rajendra"

* tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Don't give a warning when HPT resizing isn't available
  powerpc: Wire up statx() syscall

7 years agoMerge branch 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Mon, 20 Mar 2017 01:11:13 +0000 (18:11 -0700)]
Merge branch 'parisc-4.11-2' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:

 - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
   modules with CONFIG_MODVERSIONS.

 - Dave Anglin optimized the cache flushing for vmap ranges.

 - Arvind Yadav provided a fix for a potential NULL pointer dereference
   in the parisc perf code (and some code cleanups).

 - I wired up the new statx system call, fixed some compiler warnings
   with the access_ok() macro and fixed shutdown code to really halt a
   system at shutdown instead of crashing & rebooting.

* 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix system shutdown halt
  parisc: perf: Fix potential NULL pointer dereference
  parisc: Avoid compiler warnings with access_ok()
  parisc: Wire up statx system call
  parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
  parisc: support R_PARISC_SECREL32 relocation in modules

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Linus Torvalds [Mon, 20 Mar 2017 01:06:31 +0000 (18:06 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:
 "The bulk of the changes are in qla2xxx target driver code to address
  various issues found during Cavium/QLogic's internal testing (stable
  CC's included), along with a few other stability and smaller
  miscellaneous improvements.

  There are also a couple of different patch sets from Mike Christie,
  which have been a result of his work to use target-core ALUA logic
  together with tcm-user backend driver.

  Finally, a patch to address some long standing issues with
  pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
  which will make folks using physical (or virtual) magnetic tape happy"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
  qla2xxx: Update driver version to 9.00.00.00-k
  qla2xxx: Fix delayed response to command for loop mode/direct connect.
  qla2xxx: Change scsi host lookup method.
  qla2xxx: Add DebugFS node to display Port Database
  qla2xxx: Use IOCB interface to submit non-critical MBX.
  qla2xxx: Add async new target notification
  qla2xxx: Export DIF stats via debugfs
  qla2xxx: Improve T10-DIF/PI handling in driver.
  qla2xxx: Allow relogin to proceed if remote login did not finish
  qla2xxx: Fix sess_lock & hardware_lock lock order problem.
  qla2xxx: Fix inadequate lock protection for ABTS.
  qla2xxx: Fix request queue corruption.
  qla2xxx: Fix memory leak for abts processing
  qla2xxx: Allow vref count to timeout on vport delete.
  tcmu: Convert cmd_time_out into backend device attribute
  tcmu: make cmd timeout configurable
  tcmu: add helper to check if dev was configured
  target: fix race during implicit transition work flushes
  target: allow userspace to set state to transitioning
  target: fix ALUA transition timeout handling
  ...

7 years agoMerge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdim...
Linus Torvalds [Sun, 19 Mar 2017 22:45:02 +0000 (15:45 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull device-dax fixes from Dan Williams:
 "The device-dax driver was not being careful to handle falling back to
  smaller fault-granularity sizes.

  The driver already fails fault attempts that are smaller than the
  device's alignment, but it also needs to handle the cases where a
  larger page mapping could be established. For simplicity of the
  immediate fix the implementation just signals VM_FAULT_FALLBACK until
  fault-size == device-alignment.

  One fix is for -stable to address pmd-to-pte fallback from the
  original implementation, another fix is for the new (introduced in
  4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the
  ride.

  These have received a build success notification from the kbuild
  robot"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix debug output typo
  device-dax: fix pud fault fallback handling
  device-dax: fix pmd/pte fault fallback handling

7 years agoqla2xxx: Update driver version to 9.00.00.00-k
Himanshu Madhani [Wed, 15 Mar 2017 16:48:56 +0000 (09:48 -0700)]
qla2xxx: Update driver version to 9.00.00.00-k

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Fix delayed response to command for loop mode/direct connect.
Quinn Tran [Wed, 15 Mar 2017 16:48:55 +0000 (09:48 -0700)]
qla2xxx: Fix delayed response to command for loop mode/direct connect.

Current driver wait for FW to be in the ready state before
processing in-coming commands. For Arbitrated Loop or
Point-to- Point (not switch), FW Ready state can take a while.
FW will transition to ready state after all Nports have been
logged in. In the mean time, certain initiators have completed
the login and starts IO. Driver needs to start processing all
queues if FW is already started.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Change scsi host lookup method.
Quinn Tran [Wed, 15 Mar 2017 16:48:54 +0000 (09:48 -0700)]
qla2xxx: Change scsi host lookup method.

For target mode, when new scsi command arrive, driver first performs
a look up of the SCSI Host. The current look up method is based on
the ALPA portion of the NPort ID. For Cisco switch, the ALPA can
not be used as the index. Instead, the new search method is based
on the full value of the Nport_ID via btree lib.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Add DebugFS node to display Port Database
Himanshu Madhani [Wed, 15 Mar 2017 16:48:53 +0000 (09:48 -0700)]
qla2xxx: Add DebugFS node to display Port Database

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Use IOCB interface to submit non-critical MBX.
Quinn Tran [Wed, 15 Mar 2017 16:48:52 +0000 (09:48 -0700)]
qla2xxx: Use IOCB interface to submit non-critical MBX.

The Mailbox interface is currently over subscribed. We like
to reserve the Mailbox interface for the chip managment and
link initialization. Any non essential Mailbox command will
be routed through the IOCB interface. The IOCB interface is
able to absorb more commands.

Following commands are being routed through IOCB interface

- Get ID List (007Ch)
- Get Port DB (0064h)
- Get Link Priv Stats (006Dh)

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Add async new target notification
Quinn Tran [Wed, 15 Mar 2017 16:48:51 +0000 (09:48 -0700)]
qla2xxx: Add async new target notification

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Export DIF stats via debugfs
Anil Gurumurthy [Wed, 15 Mar 2017 16:48:50 +0000 (09:48 -0700)]
qla2xxx: Export DIF stats via debugfs

Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Improve T10-DIF/PI handling in driver.
Quinn Tran [Wed, 15 Mar 2017 16:48:49 +0000 (09:48 -0700)]
qla2xxx: Improve T10-DIF/PI handling in driver.

Add routines to support T10 DIF tag.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Allow relogin to proceed if remote login did not finish
Quinn Tran [Wed, 15 Mar 2017 16:48:48 +0000 (09:48 -0700)]
qla2xxx: Allow relogin to proceed if remote login did not finish

If the remote port have started the login process, then the
PLOGI and PRLI should be back to back. Driver will allow
the remote port to complete the process. For the case where
the remote port decide to back off from sending PRLI, this
local port sets an expiration timer for the PRLI. Once the
expiration time passes, the relogin retry logic is allowed
to go through and perform login with the remote port.

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Fix sess_lock & hardware_lock lock order problem.
Quinn Tran [Wed, 15 Mar 2017 16:48:47 +0000 (09:48 -0700)]
qla2xxx: Fix sess_lock & hardware_lock lock order problem.

The main lock that needs to be held for CMD or TMR submission
to upper layer is the sess_lock. The sess_lock is used to
serialize cmd submission and session deletion. The addition
of hardware_lock being held is not necessary. This patch removes
hardware_lock dependency from CMD/TMR submission.

Use hardware_lock only for error response in this case.

Path1
       CPU0                    CPU1
       ----                    ----
  lock(&(&ha->tgt.sess_lock)->rlock);
                               lock(&(&ha->hardware_lock)->rlock);
                               lock(&(&ha->tgt.sess_lock)->rlock);
  lock(&(&ha->hardware_lock)->rlock);

Path2/deadlock
*** DEADLOCK ***
Call Trace:
dump_stack+0x85/0xc2
print_circular_bug+0x1e3/0x250
__lock_acquire+0x1425/0x1620
lock_acquire+0xbf/0x210
_raw_spin_lock_irqsave+0x53/0x70
qlt_sess_work_fn+0x21d/0x480 [qla2xxx]
process_one_work+0x1f4/0x6e0

Cc: <stable@vger.kernel.org>
Cc: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Fix inadequate lock protection for ABTS.
Quinn Tran [Wed, 15 Mar 2017 16:48:46 +0000 (09:48 -0700)]
qla2xxx: Fix inadequate lock protection for ABTS.

Normally, ABTS is sent to Target Core as Task MGMT command.
In the case of error, qla2xxx needs to send response, hardware_lock
is required to prevent request queue corruption.

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Fix request queue corruption.
Quinn Tran [Wed, 15 Mar 2017 16:48:45 +0000 (09:48 -0700)]
qla2xxx: Fix request queue corruption.

When FW notify driver or driver detects low FW resource,
driver tries to send out Busy SCSI Status to tell Initiator
side to back off. During the send process, the lock was not held.

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Fix memory leak for abts processing
Quinn Tran [Wed, 15 Mar 2017 16:48:44 +0000 (09:48 -0700)]
qla2xxx: Fix memory leak for abts processing

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoqla2xxx: Allow vref count to timeout on vport delete.
Joe Carnuccio [Wed, 15 Mar 2017 16:48:43 +0000 (09:48 -0700)]
qla2xxx: Allow vref count to timeout on vport delete.

Cc: <stable@vger.kernel.org>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotcmu: Convert cmd_time_out into backend device attribute
Nicholas Bellinger [Sat, 18 Mar 2017 22:04:13 +0000 (15:04 -0700)]
tcmu: Convert cmd_time_out into backend device attribute

Instead of putting cmd_time_out under ../target/core/user_0/foo/control,
which has historically been used by parameters needed for initial
backend device configuration, go ahead and move cmd_time_out into
a backend device attribute.

In order to do this, tcmu_module_init() has been updated to create
a local struct configfs_attribute **tcmu_attrs, that is based upon
the existing passthrough_attrib_attrs along with the new cmd_time_out
attribute.  Once **tcm_attrs has been setup, go ahead and point
it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core.

Also following MNC's previous change, ->cmd_time_out is stored in
milliseconds but exposed via configfs in seconds.  Also, note this
patch restricts the modification of ->cmd_time_out to before +
after the TCMU device has been configured, but not while it has
active fabric exports.

Cc: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotcmu: make cmd timeout configurable
Mike Christie [Thu, 9 Mar 2017 08:42:09 +0000 (02:42 -0600)]
tcmu: make cmd timeout configurable

A single daemon could implement multiple types of devices
using multuple types of real devices that may not support
restarting from crashes and/or handling tcmu timeouts. This
makes the cmd timeout configurable, so handlers that do not
support it can turn if off for now.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotcmu: add helper to check if dev was configured
Mike Christie [Thu, 9 Mar 2017 08:42:08 +0000 (02:42 -0600)]
tcmu: add helper to check if dev was configured

This adds a helper to check if the dev was configured. It
will be used in the next patch to prevent updates to some
config settings after the device has been setup.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoMerge tag 'openrisc-for-linus' of git://github.com/openrisc/linux
Linus Torvalds [Sat, 18 Mar 2017 22:50:39 +0000 (15:50 -0700)]
Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux

Pull OpenRISC fixes from Stafford Horne:
 "OpenRISC fixes for build issues that were exposed by kbuild robots
  after 4.11 merge. All from allmodconfig builds. This includes:

   - bug in the handling of 8-byte get_user() calls

   - module build failure due to multile missing symbol exports"

* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
  openrisc: Export symbols needed by modules
  openrisc: fix issue handling 8 byte get_user calls
  openrisc: xchg: fix `computed is not used` warning

7 years agotarget: fix race during implicit transition work flushes
Mike Christie [Thu, 2 Mar 2017 10:59:50 +0000 (04:59 -0600)]
target: fix race during implicit transition work flushes

This fixes the following races:

1. core_alua_do_transition_tg_pt could have read
tg_pt_gp_alua_access_state and gone into this if chunk:

if (!explicit &&
        atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
           ALUA_ACCESS_STATE_TRANSITION) {

and then core_alua_do_transition_tg_pt_work could update the
state. core_alua_do_transition_tg_pt would then only set
tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would
not get updated with the second calls state.

2. core_alua_do_transition_tg_pt could be setting
tg_pt_gp_transition_complete while the tg_pt_gp_transition_work
is already completing. core_alua_do_transition_tg_pt then waits on the
completion that will never be called.

To handle these issues, we just call flush_work which will return when
core_alua_do_transition_tg_pt_work has completed so there is no need
to do the complete/wait. And, if core_alua_do_transition_tg_pt_work
was running, instead of trying to sneak in the state change, we just
schedule up another core_alua_do_transition_tg_pt_work call.

Note that this does not handle a possible race where there are multiple
threads call core_alua_do_transition_tg_pt at the same time. I think
we need a mutex in target_tg_pt_gp_alua_access_state_store.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotarget: allow userspace to set state to transitioning
Mike Christie [Thu, 2 Mar 2017 10:59:49 +0000 (04:59 -0600)]
target: allow userspace to set state to transitioning

Userspace target_core_user handlers like tcmu-runner may want to set the
ALUA state to transitioning while it does implicit transitions. This
patch allows that state when set from configfs.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotarget: fix ALUA transition timeout handling
Mike Christie [Thu, 2 Mar 2017 10:59:48 +0000 (04:59 -0600)]
target: fix ALUA transition timeout handling

The implicit transition time tells initiators the min time
to wait before timing out a transition. We currently schedule
the transition to occur in tg_pt_gp_implicit_trans_secs
seconds so there is no room for delays. If
core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata
needs to write out info to a remote file, then the initiator can
easily time out the operation.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotarget: Use system workqueue for ALUA transitions
Mike Christie [Thu, 2 Mar 2017 05:13:26 +0000 (23:13 -0600)]
target: Use system workqueue for ALUA transitions

If tcmu-runner is processing a STPG and needs to change the kernel's
ALUA state then we cannot use the same work queue for task management
requests and ALUA transitions, because we could deadlock. The problem
occurs when a STPG times out before tcmu-runner is able to
call into target_tg_pt_gp_alua_access_state_store->
core_alua_do_port_transition -> core_alua_do_transition_tg_pt ->
queue_work. In this case, the tmr is on the work queue waiting for
the STPG to complete, but the STPG transition is now queued behind
the waiting tmr.

Note:
This bug will also be fixed by this patch:
http://www.spinics.net/lists/target-devel/msg14560.html
which switches the tmr code to use the system workqueues.

For both, I am not sure if we need a dedicated workqueue since
it is not a performance path and I do not think we need WQ_MEM_RECLAIM
to make forward progress to free up memory like the block layer does.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotarget: fail ALUA transitions for pscsi
Mike Christie [Thu, 2 Mar 2017 05:13:25 +0000 (23:13 -0600)]
target: fail ALUA transitions for pscsi

We do not setup the LU group for pscsi devices, so if you write
a state to alua_access_state that will cause a transition you will
get a NULL pointer dereference.

This patch will fail attempts to try and transition the path
for backend devices that set the TRANSPORT_FLAG_PASSTHROUGH_ALUA
flag.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotarget: allow ALUA setup for some passthrough backends
Mike Christie [Thu, 2 Mar 2017 05:13:24 +0000 (23:13 -0600)]
target: allow ALUA setup for some passthrough backends

This patch allows passthrough backends to use the core/base LIO
ALUA setup and state checks, but still handle the execution of
commands.

This will allow the target_core_user module to execute STPG and RTPG
in userspace, and not have to duplicate the ALUA state checks, path
information (needed so we can check if command is executable on
specific paths) and setup (rtslib sets/updates the configfs ALUA
interface like it does for iblock or file).

For STPG, the target_core_user userspace daemon, tcmu-runner will
still execute the STPG, and to update the core/base LIO state it
will use the existing configfs interface. For RTPG, tcmu-runner
will loop over configfs and/or cache the state.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotcmu: return on first Opt parse failure
Mike Christie [Thu, 2 Mar 2017 05:14:40 +0000 (23:14 -0600)]
tcmu: return on first Opt parse failure

We only were returing failure if the last opt to be parsed failed.
This has a return failure when we first detect a failure.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotcmu: allow hw_max_sectors greater than 128
Mike Christie [Thu, 2 Mar 2017 05:14:39 +0000 (23:14 -0600)]
tcmu: allow hw_max_sectors greater than 128

tcmu hard codes the hw_max_sectors to 128 which is a litle small.
Userspace uses the max_sectors to report the optimal IO size and
some initiators perform better with larger IOs (open-iscsi seems
to do better with 256 to 512 depending on the test).

(Fix do not display hw max sectors twice - MNC)

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agotarget: Drop pointless tfo->check_stop_free check
Nicholas Bellinger [Wed, 8 Mar 2017 08:09:59 +0000 (00:09 -0800)]
target: Drop pointless tfo->check_stop_free check

All in-tree fabric drivers provide a tfo->check_stop_free(),
so there is no need to do the extra check within existing
transport_cmd_check_stop_to_fabric() code.

Just to be sure, add a check in target_fabric_tf_ops_check()
to notify any out-of-tree drivers that might be missing it.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
7 years agoparisc: Fix system shutdown halt
Helge Deller [Sat, 18 Mar 2017 16:13:27 +0000 (17:13 +0100)]
parisc: Fix system shutdown halt

On those parisc machines which don't provide a software power off
function, the system currently kills the init process at the end of a
shutdown and unexpectedly restarts insteads of halting.
Fix it by adding a loop which will not return.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.9+
7 years agoparisc: perf: Fix potential NULL pointer dereference
Arvind Yadav [Tue, 14 Mar 2017 09:54:51 +0000 (15:24 +0530)]
parisc: perf: Fix potential NULL pointer dereference

Fix potential NULL pointer dereference and clean up
coding style errors (code indent, trailing whitespaces).

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
7 years agoMerge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 18 Mar 2017 15:33:44 +0000 (08:33 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull CPU hotplug fix from Thomas Gleixner:
 "A single fix preventing the concurrent execution of the CPU hotplug
  callback install/invocation machinery. Long standing bug caused by a
  massive brain slip of that Gleixner dude, which went unnoticed for
  almost a year"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Serialize callback invocations proper

7 years agoMerge tag 'pm-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Sat, 18 Mar 2017 00:25:14 +0000 (17:25 -0700)]
Merge tag 'pm-4.11-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix a few more intel_pstate issues and one small issue in the
  cpufreq core.

  Specifics:

   - Fix breakage in the intel_pstate's debugfs interface for PID
     controller tuning (Rafael Wysocki)

   - Fix computations related to P-state limits in intel_pstate to avoid
     excessive rounding errors leading to visible inaccuracies (Srinivas
     Pandruvada, Rafael Wysocki)

   - Add a missing newline to a message printed by one function in the
     cpufreq core and clean up that function (Rafael Wysocki)"

* tag 'pm-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Fix and clean up show_cpuinfo_cur_freq()
  cpufreq: intel_pstate: Avoid percentages in limits-related computations
  cpufreq: intel_pstate: Correct frequency setting in the HWP mode
  cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()

7 years agoMerge branches 'pm-cpufreq-fixes' and 'intel_pstate-fixes'
Rafael J. Wysocki [Fri, 17 Mar 2017 23:45:09 +0000 (00:45 +0100)]
Merge branches 'pm-cpufreq-fixes' and 'intel_pstate-fixes'

* pm-cpufreq-fixes:
  cpufreq: Fix and clean up show_cpuinfo_cur_freq()

* intel_pstate-fixes:
  cpufreq: intel_pstate: Avoid percentages in limits-related computations
  cpufreq: intel_pstate: Correct frequency setting in the HWP mode
  cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()

7 years agoMerge tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Linus Torvalds [Fri, 17 Mar 2017 21:16:22 +0000 (14:16 -0700)]
Merge tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client fixes from Anna Schumaker:
 "We have a handful of stable fixes to fix kernel warnings and other
  bugs that have been around for a while. We've also found a few other
  reference counting bugs and memory leaks since the initial 4.11 pull.

  Stable Bugfixes:
   - Fix decrementing nrequests in NFS v4.2 COPY to fix kernel warnings
   - Prevent a double free in async nfs4_exchange_id()
   - Squelch a kbuild sparse complaint for xprtrdma

  Other Bugfixes:
   - Fix a typo (NFS_ATTR_FATTR_GROUP_NAME) that causes a memory leak
   - Fix a reference leak that causes kernel warnings
   - Make nfs4_cb_sv_ops static to fix a sparse warning
   - Respect a server's max size in CREATE_SESSION
   - Handle errors from nfs4_pnfs_ds_connect
   - Flexfiles layout shouldn't mark devices as unavailable"

* tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  pNFS/flexfiles: never nfs4_mark_deviceid_unavailable
  pNFS: return status from nfs4_pnfs_ds_connect
  NFSv4.1 respect server's max size in CREATE_SESSION
  NFS prevent double free in async nfs4_exchange_id
  nfs: make nfs4_cb_sv_ops static
  xprtrdma: Squelch kbuild sparse complaint
  NFS: fix the fault nrequests decreasing for nfs_inode COPY
  NFSv4: fix a reference leak caused WARNING messages
  nfs4: fix a typo of NFS_ATTR_FATTR_GROUP_NAME

7 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 17 Mar 2017 21:05:03 +0000 (14:05 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "An assorted pile of fixes along with some hardware enablement:

   - a fix for a KASAN / branch profiling related boot failure

   - some more fallout of the PUD rework

   - a fix for the Always Running Timer which is not initialized when
     the TSC frequency is known at boot time (via MSR/CPUID)

   - a resource leak fix for the RDT filesystem

   - another unwinder corner case fixup

   - removal of the warning for duplicate NMI handlers because there are
     legitimate cases where more than one handler can be registered at
     the last level

   - make a function static - found by sparse

   - a set of updates for the Intel MID platform which got delayed due
     to merge ordering constraints. It's hardware enablement for a non
     mainstream platform, so there is no risk"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mpx: Make unnecessarily global function static
  x86/intel_rdt: Put group node in rdtgroup_kn_unlock
  x86/unwind: Fix last frame check for aligned function stacks
  mm, x86: Fix native_pud_clear build error
  x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y
  x86/platform/intel-mid: Add power button support for Merrifield
  x86/platform/intel-mid: Use common power off sequence
  x86/platform: Remove warning message for duplicate NMI handlers
  x86/tsc: Fix ART for TSC_KNOWN_FREQ
  x86/platform/intel-mid: Correct MSI IRQ line for watchdog device

7 years agoMerge branch 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 17 Mar 2017 21:01:40 +0000 (14:01 -0700)]
Merge branch 'x86-acpi-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 acpi fixes from Thomas Gleixner:
 "This update deals with the fallout of the recent work to make
  cpuid/node mappings persistent.

  It turned out that the boot time ACPI based mapping tripped over ACPI
  inconsistencies and caused regressions. It's partially reverted and
  the fragile part replaced by an implementation which makes the mapping
  persistent when a CPU goes online for the first time"

* 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  acpi/processor: Check for duplicate processor ids at hotplug time
  acpi/processor: Implement DEVICE operator for processor enumeration
  x86/acpi: Restore the order of CPU IDs
  Revert"x86/acpi: Enable MADT APIs to return disabled apicids"
  Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"

7 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 17 Mar 2017 20:59:52 +0000 (13:59 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "A set of perf related fixes:

   - fix a CR4.PCE propagation issue caused by usage of mm instead of
     active_mm and therefore propagated the wrong value.

   - perf core fixes, which plug a use-after-free issue and make the
     event inheritance on fork more robust.

   - a tooling fix for symbol handling"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf symbols: Fix symbols__fixup_end heuristic for corner cases
  x86/perf: Clarify why x86_pmu_event_mapped() isn't racy
  x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm
  perf/core: Better explain the inherit magic
  perf/core: Simplify perf_event_free_task()
  perf/core: Fix event inheritance on fork()
  perf/core: Fix use-after-free in perf_release()

7 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 17 Mar 2017 20:19:07 +0000 (13:19 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Thomas Gleixner:
 "From the scheduler departement:

   - a bunch of sched deadline related fixes which deal with various
     buglets and corner cases.

   - two fixes for the loadavg spikes which are caused by the delayed
     NOHZ accounting"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Use deadline instead of period when calculating overflow
  sched/deadline: Throttle a constrained deadline task activated after the deadline
  sched/deadline: Make sure the replenishment timer fires in the next period
  sched/loadavg: Use {READ,WRITE}_ONCE() for sample window
  sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting
  sched/deadline: Add missing update_rq_clock() in dl_task_timer()

7 years agoMerge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 17 Mar 2017 20:16:24 +0000 (13:16 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "Three fixes related to locking:

   - fix a SIGKILL issue for RWSEM_GENERIC_SPINLOCK which has been fixed
     for the XCHGADD variant already

   - plug a potential use after free in the futex code

   - prevent leaking a held spinlock in an futex error handling code
     path"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y
  futex: Add missing error handling to FUTEX_REQUEUE_PI
  futex: Fix potential use-after-free in FUTEX_REQUEUE_PI

7 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 17 Mar 2017 20:13:35 +0000 (13:13 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "Just a simple revert of a new sched_clock implementation which turned
  out to be buggy"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock"

7 years agopNFS/flexfiles: never nfs4_mark_deviceid_unavailable
Weston Andros Adamson [Thu, 9 Mar 2017 17:56:49 +0000 (12:56 -0500)]
pNFS/flexfiles: never nfs4_mark_deviceid_unavailable

The flexfiles layout should never mark a device unavailable.

Move nfs4_mark_deviceid_unavailable out of nfs4_pnfs_ds_connect and call
directly from files layout where it's still needed.

The flexfiles driver still handles marked devices in error paths, but will
now print a rate limited warning.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
7 years agopNFS: return status from nfs4_pnfs_ds_connect
Weston Andros Adamson [Thu, 9 Mar 2017 17:56:48 +0000 (12:56 -0500)]
pNFS: return status from nfs4_pnfs_ds_connect

The nfs4_pnfs_ds_connect path can call rpc_create which can fail or it
can wait on another context to reach the same failure.

This checks that the rpc_create succeeded and returns the error to the
caller.

When an error is returned, both the files and flexfiles layouts will return
NULL from _prepare_ds(). The flexfiles layout will also return the layout
with the error NFS4ERR_NXIO.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
7 years agoNFSv4.1 respect server's max size in CREATE_SESSION
Olga Kornievskaia [Wed, 8 Mar 2017 19:39:15 +0000 (14:39 -0500)]
NFSv4.1 respect server's max size in CREATE_SESSION

Currently client doesn't respect max sizes server returns in CREATE_SESSION.
nfs4_session_set_rwsize() gets called and server->rsize, server->wsize are 0
so they never get set to the sizes returned by the server.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
7 years agoNFS prevent double free in async nfs4_exchange_id
Olga Kornievskaia [Mon, 13 Mar 2017 14:36:19 +0000 (10:36 -0400)]
NFS prevent double free in async nfs4_exchange_id

Since rpc_task is async, the release function should be called which
will free the impl_id, scope, and owner.

Trond pointed at 2 more problems:
-- use of client pointer after free in the nfs4_exchangeid_release() function
-- cl_count mismatch if rpc_run_task() isn't run

Fixes: 8d89bd70bc9 ("NFS setup async exchange_id")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org # 4.9
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
7 years agonfs: make nfs4_cb_sv_ops static
Jason Yan [Fri, 10 Mar 2017 02:48:13 +0000 (10:48 +0800)]
nfs: make nfs4_cb_sv_ops static

Fixes the following sparse warning:

fs/nfs/callback.c:235:21: warning: symbol 'nfs4_cb_sv_ops' was not
declared. Should it be static?

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
7 years agoxprtrdma: Squelch kbuild sparse complaint
Chuck Lever [Sat, 11 Mar 2017 20:52:47 +0000 (15:52 -0500)]
xprtrdma: Squelch kbuild sparse complaint

New complaint from kbuild for 4.9.y:

net/sunrpc/xprtrdma/verbs.c:489:19: sparse: incompatible types in
    comparison expression (different type sizes)

verbs.c:
489 max_sge = min(ia->ri_device->attrs.max_sge, RPCRDMA_MAX_SEND_SGES);

I can't reproduce this running sparse here. Likewise, "make W=1
net/sunrpc/xprtrdma/verbs.o" never indicated any issue.

A little poking suggests that because the range of its values is
small, gcc can make the actual width of RPCRDMA_MAX_SEND_SGES
smaller than the width of an unsigned integer.

Fixes: 16f906d66cd7 ("xprtrdma: Reduce required number of send SGEs")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
7 years agoNFS: fix the fault nrequests decreasing for nfs_inode COPY
Kinglong Mee [Thu, 9 Mar 2017 03:36:36 +0000 (11:36 +0800)]
NFS: fix the fault nrequests decreasing for nfs_inode COPY

The nfs_commit_file for NFSv4.2's COPY operation goes through
the commit path for normal WRITE, but without increase nrequests,
so, the nrequests decreased in nfs_commit_release_pages is fault.
After that, the nrequests will be wrong.

[ 5670.299881] ------------[ cut here ]------------
[ 5670.300295] WARNING: CPU: 0 PID: 27656 at fs/nfs/inode.c:127 nfs_clear_inode+0x66/0x90 [nfs]
[ 5670.300558] Modules linked in: nfsv4(E) nfs(E) fscache(E) tun bridge stp llc fuse ip_set nfnetlink vmw_vsock_vmci_transport vsock snd_seq_midi snd_seq_midi_event ppdev f2fs coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_ens1371 intel_rapl_perf gameport snd_ac97_codec vmw_balloon ac97_bus snd_seq snd_pcm joydev snd_rawmidi snd_timer snd_seq_device snd soundcore nfit parport_pc parport acpi_cpufreq tpm_tis tpm_tis_core tpm i2c_piix4 vmw_vmci shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c vmwgfx drm_kms_helper ttm drm e1000 crc32c_intel mptspi scsi_transport_spi serio_raw mptscsih mptbase ata_generic pata_acpi fjes [last unloaded: fscache]
[ 5670.302925] CPU: 0 PID: 27656 Comm: umount.nfs4 Tainted: G        W   E   4.11.0-rc1+ #519
[ 5670.303292] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
[ 5670.304094] Call Trace:
[ 5670.304510]  dump_stack+0x63/0x86
[ 5670.304917]  __warn+0xcb/0xf0
[ 5670.305276]  warn_slowpath_null+0x1d/0x20
[ 5670.305661]  nfs_clear_inode+0x66/0x90 [nfs]
[ 5670.306093]  nfs4_evict_inode+0x61/0x70 [nfsv4]
[ 5670.306480]  evict+0xbb/0x1c0
[ 5670.306888]  dispose_list+0x4d/0x70
[ 5670.307233]  evict_inodes+0x178/0x1a0
[ 5670.307579]  generic_shutdown_super+0x44/0xf0
[ 5670.307985]  nfs_kill_super+0x21/0x40 [nfs]
[ 5670.308325]  deactivate_locked_super+0x43/0x70
[ 5670.308698]  deactivate_super+0x5a/0x60
[ 5670.309036]  cleanup_mnt+0x3f/0x90
[ 5670.309407]  __cleanup_mnt+0x12/0x20
[ 5670.309837]  task_work_run+0x80/0xa0
[ 5670.310162]  exit_to_usermode_loop+0x89/0x90
[ 5670.310497]  syscall_return_slowpath+0xaa/0xb0
[ 5670.310875]  entry_SYSCALL_64_fastpath+0xa7/0xa9
[ 5670.311197] RIP: 0033:0x7f1bb3617fe7
[ 5670.311545] RSP: 002b:00007ffecbabb828 EFLAGS: 00000206 ORIG_RAX: 00000000000000a6
[ 5670.311906] RAX: 0000000000000000 RBX: 0000000001dca1f0 RCX: 00007f1bb3617fe7
[ 5670.312239] RDX: 000000000000000c RSI: 0000000000000001 RDI: 0000000001dc83c0
[ 5670.312653] RBP: 0000000001dc83c0 R08: 0000000000000001 R09: 0000000000000000
[ 5670.312998] R10: 0000000000000755 R11: 0000000000000206 R12: 00007ffecbabc66a
[ 5670.313335] R13: 0000000001dc83a0 R14: 0000000000000000 R15: 0000000000000000
[ 5670.313758] ---[ end trace bf4bfe7764e4eb40 ]---

Cc: linux-kernel@vger.kernel.org
Fixes: 67911c8f18 ("NFS: Add nfs_commit_file()")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
7 years agoMerge tag 'afs-20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells...
Linus Torvalds [Fri, 17 Mar 2017 19:16:44 +0000 (12:16 -0700)]
Merge tag 'afs-20170316' of git://git./linux/kernel/git/dhowells/linux-fs

Pull AFS fixes from David Howells:
 "Fixes to the AFS filesystem in the kernel.

  They fix a variety of bugs. These include some issues fixed for
  consistency with other AFS implementations:

   - handle AFS mode bits better

   - use the client mtime rather than the server mtime in the protocol

   - handle the server returning more or less data than was requested in
     a FetchData call

   - distinguish mountpoints from symlinks based on the mode bits rather
     than preemptively reading every symlink to find out what it
     actually represents

  One other notable change for the user is that files are now flushed on
  close analogously with other network filesystems"

* tag 'afs-20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (28 commits)
  afs: Don't wait for page writeback with the page lock held
  afs: ->writepage() shouldn't call clear_page_dirty_for_io()
  afs: Fix abort on signal while waiting for call completion
  afs: Fix an off-by-one error in afs_send_pages()
  afs: Fix afs_kill_pages()
  afs: Fix page leak in afs_write_begin()
  afs: Don't set PG_error on local EINTR or ENOMEM when filling a page
  afs: Populate and use client modification time
  afs: Better abort and net error handling
  afs: Invalid op ID should abort with RXGEN_OPCODE
  afs: Fix the maths in afs_fs_store_data()
  afs: Use a bvec rather than a kvec in afs_send_pages()
  afs: Make struct afs_read::remain 64-bit
  afs: Fix AFS read bug
  afs: Prevent callback expiry timer overflow
  afs: Migrate vlocation fields to 64-bit
  afs: security: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
  afs: inode: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
  afs: Distinguish mountpoints from symlinks by file mode alone
  afs: Flush outstanding writes when an fd is closed
  ...

7 years agoMerge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Linus Torvalds [Fri, 17 Mar 2017 19:14:49 +0000 (12:14 -0700)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fix from Russell King:
 "Just one change to add the statx syscall this time around"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: wire up statx syscall

7 years agoMerge tag 'for-linus-4.11b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 17 Mar 2017 18:25:46 +0000 (11:25 -0700)]
Merge tag 'for-linus-4.11b-rc3-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fix from Juergen Gross:
 "A minor fix for using the appropriate refcount_t instead of atomic_t"

* tag 'for-linus-4.11b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  drivers, xen: convert grant_map.users from atomic_t to refcount_t

7 years agoMerge tag 'drm-fixes-for-v4.11-rc3' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 17 Mar 2017 18:19:52 +0000 (11:19 -0700)]
Merge tag 'drm-fixes-for-v4.11-rc3' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Bunch of fixes across the drivers, in a St Patrick's day pull request
  (please turn terminal colors to green on black or black on green for
  full effect).

  On the arm side, tilcdc, omap and malidp got fixes, while amd has some
  powermanagement fixes, and intel has a set of fixes across the driver.

  Nothing seems to bad or scary at this point"

* tag 'drm-fixes-for-v4.11-rc3' of git://people.freedesktop.org/~airlied/linux: (27 commits)
  drm/amd/amdgpu:  Fix debugfs reg read/write address width
  drm/amdgpu/si: add dpm quirk for Oland
  drm/radeon/si: add dpm quirk for Oland
  drm: amd: remove broken include path
  drm/amd/powerplay: fix copy error in smu7_clockpoweragting.c
  drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled
  drm/tilcdc: Fix hardcoded fail-return value in tilcdc_crtc_create()
  drm/i915: Fix forcewake active domain tracking
  drm/i915: Nuke skl_update_plane debug message from the pipe update critical section
  drm/i915: use correct node for handling cache domain eviction
  uapi: fix drm/omap_drm.h userspace compilation errors
  drm/omap: fix dmabuf mmap for dma_alloc'ed buffers
  drm/amdgpu: fix parser init error path to avoid crash in parser fini
  drm/amd/amdgpu: Disable GFX_PG on Carrizo until compute issues solved
  drm: mali-dp: Fix smart layer not going to composition
  drm: mali-dp: Remove mclk rate management
  drm/i915: Drain the freed state from the tail of the next commit
  drm/i915: Nuke debug messages from the pipe update critical section
  drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl
  drm/i915: Store a permanent error in obj->mm.pages
  ...

7 years agoMerge tag 'perf-urgent-for-mingo-4.11-20170317' of git://git.kernel.org/pub/scm/linux...
Ingo Molnar [Fri, 17 Mar 2017 14:13:28 +0000 (15:13 +0100)]
Merge tag 'perf-urgent-for-mingo-4.11-20170317' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fix from Arnaldo Carvalho de Melo:

- Fix symbols__fixup_end heuristic for corner cases, such as JITted eBPF
  programs, that are loaded at page aligned addresses, just after the
  kernel proper (Daniel Borkmann)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agoperf symbols: Fix symbols__fixup_end heuristic for corner cases
Daniel Borkmann [Wed, 15 Mar 2017 21:53:37 +0000 (22:53 +0100)]
perf symbols: Fix symbols__fixup_end heuristic for corner cases

The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:

 i) If the symbol has a start address (f.e. exposed via kallsyms)
    that is at a page boundary, then the roundup(curr->start, 4096)
    for the last entry will result in curr->start == curr->end with
    a symbol length of zero.

ii) If the symbol has a start address that is shortly before a page
    boundary, then also here, curr->end - curr->start will just be
    very few bytes, where it's unrealistic that we could perform a
    match against.

Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.

Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.

Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
7 years agox86/perf: Clarify why x86_pmu_event_mapped() isn't racy
Andy Lutomirski [Thu, 16 Mar 2017 19:59:40 +0000 (12:59 -0700)]
x86/perf: Clarify why x86_pmu_event_mapped() isn't racy

Naively, it looks racy, but ->mmap_sem saves it.  Add a comment and a
lockdep assertion.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/03a1e629063899168dfc4707f3bb6e581e21f5c6.1489694270.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agox86/perf: Fix CR4.PCE propagation to use active_mm instead of mm
Andy Lutomirski [Thu, 16 Mar 2017 19:59:39 +0000 (12:59 -0700)]
x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm

If one thread mmaps a perf event while another thread in the same mm
is in some context where active_mm != mm (which can happen in the
scheduler, for example), refresh_pce() would write the wrong value
to CR4.PCE.  This broke some PAPI tests.

Reported-and-tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 7911d3f7af14 ("perf/x86: Only allow rdpmc if a perf_event is mapped")
Link: http://lkml.kernel.org/r/0c5b38a76ea50e405f9abe07a13dfaef87c173a1.1489694270.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
7 years agopowerpc/pseries: Don't give a warning when HPT resizing isn't available
Michael Ellerman [Fri, 17 Mar 2017 05:02:35 +0000 (16:02 +1100)]
powerpc/pseries: Don't give a warning when HPT resizing isn't available

As of commit 438cc81a41e8 ("powerpc/pseries: Automatically resize HPT
for memory hot add/remove"), when running on the pseries platform, we
always attempt to use the PAPR extension to resize the hashed page
table (HPT) when we add or remove memory.

This is fine, but when the extension is not available we'll give a
harmless, but scary warning. Instead check if the firmware supports HPT
resizing before populating the mmu_hash_ops.resize_hpt pointer.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
7 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Fri, 17 Mar 2017 01:23:02 +0000 (18:23 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge fixes from Andrew Morton:
 "6 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  drivers core: remove assert_held_device_hotplug()
  mm: add private lock to serialize memory hotplug operations
  mm: don't warn when vmalloc() fails due to a fatal signal
  mm, x86: fix native_pud_clear build error
  kasan: add a prototype of task_struct to avoid warning
  z3fold: fix spinlock unlocking in page reclaim

7 years agodrivers core: remove assert_held_device_hotplug()
Heiko Carstens [Thu, 16 Mar 2017 23:40:33 +0000 (16:40 -0700)]
drivers core: remove assert_held_device_hotplug()

The last caller of assert_held_device_hotplug() is gone, so remove it again.

Link: http://lkml.kernel.org/r/20170314125226.16779-3-heiko.carstens@de.ibm.com
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agomm: add private lock to serialize memory hotplug operations
Heiko Carstens [Thu, 16 Mar 2017 23:40:30 +0000 (16:40 -0700)]
mm: add private lock to serialize memory hotplug operations

Commit bfc8c90139eb ("mem-hotplug: implement get/put_online_mems")
introduced new functions get/put_online_mems() and mem_hotplug_begin/end()
in order to allow similar semantics for memory hotplug like for cpu
hotplug.

The corresponding functions for cpu hotplug are get/put_online_cpus()
and cpu_hotplug_begin/done() for cpu hotplug.

The commit however missed to introduce functions that would serialize
memory hotplug operations like they are done for cpu hotplug with
cpu_maps_update_begin/done().

This basically leaves mem_hotplug.active_writer unprotected and allows
concurrent writers to modify it, which may lead to problems as outlined
by commit f931ab479dd2 ("mm: fix devm_memremap_pages crash, use
mem_hotplug_{begin, done}").

That commit was extended again with commit b5d24fda9c3d ("mm,
devm_memremap_pages: hold device_hotplug lock over mem_hotplug_{begin,
done}") which serializes memory hotplug operations for some call sites
by using the device_hotplug lock.

In addition with commit 3fc21924100b ("mm: validate device_hotplug is held
for memory hotplug") a sanity check was added to mem_hotplug_begin() to
verify that the device_hotplug lock is held.

This in turn triggers the following warning on s390:

WARNING: CPU: 6 PID: 1 at drivers/base/core.c:643 assert_held_device_hotplug+0x4a/0x58
 Call Trace:
  assert_held_device_hotplug+0x40/0x58)
  mem_hotplug_begin+0x34/0xc8
  add_memory_resource+0x7e/0x1f8
  add_memory+0xda/0x130
  add_memory_merged+0x15c/0x178
  sclp_detect_standby_memory+0x2ae/0x2f8
  do_one_initcall+0xa2/0x150
  kernel_init_freeable+0x228/0x2d8
  kernel_init+0x2a/0x140
  kernel_thread_starter+0x6/0xc

One possible fix would be to add more lock_device_hotplug() and
unlock_device_hotplug() calls around each call site of
mem_hotplug_begin/end().  But that would give the device_hotplug lock
additional semantics it better should not have (serialize memory hotplug
operations).

Instead add a new memory_add_remove_lock which has the similar semantics
like cpu_add_remove_lock for cpu hotplug.

To keep things hopefully a bit easier the lock will be locked and unlocked
within the mem_hotplug_begin/end() functions.

Link: http://lkml.kernel.org/r/20170314125226.16779-2-heiko.carstens@de.ibm.com
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agomm: don't warn when vmalloc() fails due to a fatal signal
Dmitry Vyukov [Thu, 16 Mar 2017 23:40:27 +0000 (16:40 -0700)]
mm: don't warn when vmalloc() fails due to a fatal signal

When vmalloc() fails it prints a very lengthy message with all the
details about memory consumption assuming that it happened due to OOM.

However, vmalloc() can also fail due to fatal signal pending.  In such
case the message is quite confusing because it suggests that it is OOM
but the numbers suggest otherwise.  The messages can also pollute
console considerably.

Don't warn when vmalloc() fails due to fatal signal pending.

Link: http://lkml.kernel.org/r/20170313114425.72724-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agomm, x86: fix native_pud_clear build error
Arnd Bergmann [Thu, 16 Mar 2017 23:40:24 +0000 (16:40 -0700)]
mm, x86: fix native_pud_clear build error

We still get a build error in random configurations, after this has been
modified a few times:

  In file included from include/linux/mm.h:68:0,
                   from include/linux/suspend.h:8,
                   from arch/x86/kernel/asm-offsets.c:12:
  arch/x86/include/asm/pgtable.h:66:26: error: redefinition of 'native_pud_clear'
   #define pud_clear(pud)   native_pud_clear(pud)

My interpretation is that the build error comes from a typo in
__PAGETABLE_PUD_FOLDED, so fix that typo now, and remove the incorrect
#ifdef around the native_pud_clear definition.

Fixes: 3e761a42e19c ("mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()")
Fixes: a00cc7d9dd93 ("mm, x86: add support for PUD-sized transparent hugepages")
Link: http://lkml.kernel.org/r/20170314121330.182155-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Ackedy-by: Dave Jiang <dave.jiang@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Garnier <thgarnie@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agokasan: add a prototype of task_struct to avoid warning
Masami Hiramatsu [Thu, 16 Mar 2017 23:40:21 +0000 (16:40 -0700)]
kasan: add a prototype of task_struct to avoid warning

Add a prototype of task_struct to fix below warning on arm64.

  In file included from arch/arm64/kernel/probes/kprobes.c:19:0:
  include/linux/kasan.h:81:132: error: 'struct task_struct' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
   static inline void kasan_unpoison_task_stack(struct task_struct *task) {}

As same as other types (kmem_cache, page, and vm_struct) this adds a
prototype of task_struct data structure on top of kasan.h.

[arnd] A related warning was fixed before, but now appears in a
different line in the same file in v4.11-rc2.  The patch from Masami
Hiramatsu still seems appropriate, so let's take his version.

Fixes: 71af2ed5eeea ("kasan, sched/headers: Remove <linux/sched.h> from <linux/kasan.h>")
Link: https://patchwork.kernel.org/patch/9569839/
Link: http://lkml.kernel.org/r/20170313141517.3397802-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Alexander Potapenko <glider@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoz3fold: fix spinlock unlocking in page reclaim
Vitaly Wool [Thu, 16 Mar 2017 23:40:19 +0000 (16:40 -0700)]
z3fold: fix spinlock unlocking in page reclaim

Commmit 5a27aa822029 ("z3fold: add kref refcounting") introduced a bug
in z3fold_reclaim_page() with function exit that may leave pool->lock
spinlock held.  Here comes the trivial fix.

Fixes: 5a27aa822029 ("z3fold: add kref refcounting")
Link: http://lkml.kernel.org/r/20170311222239.7b83d8e7ef1914e05497649f@gmail.com
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoMerge tag 'xfs-4.11-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Linus Torvalds [Thu, 16 Mar 2017 19:30:43 +0000 (12:30 -0700)]
Merge tag 'xfs-4.11-fixes-2' of git://git./fs/xfs/xfs-linux

Pull xfs fix from Darrick Wong:
 "Here's a single fix for -rc3 to improve input validation on inline
  directory data to prevent buffer overruns due to corrupt metadata"

* tag 'xfs-4.11-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: verify inline directory data forks

7 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Thu, 16 Mar 2017 18:47:28 +0000 (11:47 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes/cleanups from Catalin Marinas:
 "In Will's absence I'm sending the arm64 fixes he queued for 4.11-rc3:

   - fix arm64 kernel boot warning when DEBUG_VIRTUAL and KASAN are
     enabled

   - enable KEYS_COMPAT for keyctl compat support

   - use cpus_have_const_cap() for system_uses_ttbr0_pan() (slight
     performance improvement)

   - update kerneldoc for cpu_suspend() rename

   - remove the arm64-specific kprobe_exceptions_notify (weak generic
     variant defined)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kernel: Update kerneldoc for cpu_suspend() rename
  arm64: use const cap for system_uses_ttbr0_pan()
  arm64: support keyctl() system call in 32-bit mode
  arm64: kasan: avoid bad virt_to_pfn()
  arm64: kprobes: remove kprobe_exceptions_notify

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Linus Torvalds [Thu, 16 Mar 2017 18:43:48 +0000 (11:43 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/shli/md

Pull MD fixes from Shaohua Li:

 - fix a parity calculation bug of raid5 cache by Song

 - fix a potential deadlock issue by me

 - fix two endian issues by Jason

 - fix a disk limitation issue by Neil

 - other small fixes and cleanup

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid1: fix a trivial typo in comments
  md/r5cache: fix set_syndrome_sources() for data in cache
  md: fix incorrect use of lexx_to_cpu in does_sb_need_changing
  md: fix super_offset endianness in super_1_rdev_size_change
  md/raid1/10: fix potential deadlock
  md: don't impose the MD_SB_DISKS limit on arrays without metadata.
  md: move funcs from pers->resize to update_size
  md-cluster: remove useless memset from gather_all_resync_info
  md-cluster: free md_cluster_info if node leave cluster
  md: delete dead code
  md/raid10: submit bio directly to replacement disk

7 years agoafs: Don't wait for page writeback with the page lock held
David Howells [Thu, 16 Mar 2017 16:27:49 +0000 (16:27 +0000)]
afs: Don't wait for page writeback with the page lock held

Drop the page lock before waiting for page writeback.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: ->writepage() shouldn't call clear_page_dirty_for_io()
David Howells [Thu, 16 Mar 2017 16:27:49 +0000 (16:27 +0000)]
afs: ->writepage() shouldn't call clear_page_dirty_for_io()

The ->writepage() op shouldn't call clear_page_dirty_for_io() as that has
already been called by the caller.

Fix afs_writepage() by moving the call out of
afs_write_back_from_locked_page() to afs_writepages_region() where it is
needed.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Fix abort on signal while waiting for call completion
David Howells [Thu, 16 Mar 2017 16:27:49 +0000 (16:27 +0000)]
afs: Fix abort on signal while waiting for call completion

Fix the way in which a call that's in progress and being waited for is
aborted in the case that EINTR is detected.  We should be sending
RX_USER_ABORT rather than RX_CALL_DEAD as the abort code.

Note that since the only two ways out of the loop are if the call completes
or if a signal happens, the kill-the-call clause after the loop has
finished can only happen in the case of EINTR.  This means that we only
have one abort case to deal with, not two, and the "KWC" case can never
happen and so can be deleted.

Note further that simply aborting the call isn't necessarily the best thing
here since at this point: the request has been entirely sent and it's
likely the server will do the operation anyway - whether we abort it or
not.  In future, we should punt the handling of the remainder of the call
off to a background thread.

Reported-by: Marc Dionne <marc.c.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Fix an off-by-one error in afs_send_pages()
David Howells [Thu, 16 Mar 2017 16:27:48 +0000 (16:27 +0000)]
afs: Fix an off-by-one error in afs_send_pages()

afs_send_pages() should only put the call into the AFS_CALL_AWAIT_REPLY
state if it has sent all the pages - but the check it makes is incorrect
and sometimes it will finish the loop early.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Fix afs_kill_pages()
David Howells [Thu, 16 Mar 2017 16:27:48 +0000 (16:27 +0000)]
afs: Fix afs_kill_pages()

Fix afs_kill_pages() in two ways:

 (1) If a writeback has been partially flushed, then if we try and kill the
     pages it contains, some of them may no longer be undergoing writeback
     and end_page_writeback() will assert.

     Fix this by checking to see whether the page in question is actually
     undergoing writeback before ending that writeback.

 (2) The loop that scans for pages to kill doesn't increase the first page
     index, and so the loop may not terminate, but it will try to process
     the same pages over and over again.

     Fix this by increasing the first page index to one after the last page
     we processed.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Fix page leak in afs_write_begin()
David Howells [Thu, 16 Mar 2017 16:27:48 +0000 (16:27 +0000)]
afs: Fix page leak in afs_write_begin()

afs_write_begin() leaks a ref and a lock on a page if afs_fill_page()
fails.  Fix the leak by unlocking and releasing the page in the error path.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Don't set PG_error on local EINTR or ENOMEM when filling a page
David Howells [Thu, 16 Mar 2017 16:27:48 +0000 (16:27 +0000)]
afs: Don't set PG_error on local EINTR or ENOMEM when filling a page

Don't set PG_error on a page if we get local EINTR or ENOMEM when filling a
page for writing.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Populate and use client modification time
Marc Dionne [Thu, 16 Mar 2017 16:27:47 +0000 (16:27 +0000)]
afs: Populate and use client modification time

The inode timestamps should be set from the client time
in the status received from the server, rather than the
server time which is meant for internal server use.

Set AFS_SET_MTIME and populate the mtime for operations
that take an input status, such as file/dir creation
and StoreData.  If an input time is not provided the
server will set the vnode times based on the current server
time.

In a situation where the server has some skew with the
client, this could lead to the client seeing a timestamp
in the future for a file that it just created or wrote.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Better abort and net error handling
David Howells [Thu, 16 Mar 2017 16:27:47 +0000 (16:27 +0000)]
afs: Better abort and net error handling

If we receive a network error, a remote abort or a protocol error whilst
we're still transmitting data, make sure we return an appropriate error to
the caller rather than ESHUTDOWN or ECONNABORTED.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Invalid op ID should abort with RXGEN_OPCODE
David Howells [Thu, 16 Mar 2017 16:27:47 +0000 (16:27 +0000)]
afs: Invalid op ID should abort with RXGEN_OPCODE

When we are given an invalid operation ID, we should abort that with
RXGEN_OPCODE rather than RX_INVALID_OPERATION.

Also map RXGEN_OPCODE to -ENOTSUPP.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Fix the maths in afs_fs_store_data()
David Howells [Thu, 16 Mar 2017 16:27:47 +0000 (16:27 +0000)]
afs: Fix the maths in afs_fs_store_data()

afs_fs_store_data() works out of the size of the write it's going to make,
but it uses 32-bit unsigned subtraction in one place that gets
automatically cast to loff_t.

However, if to < offset, then the number goes negative, but as the result
isn't signed, this doesn't get sign-extended to 64-bits when placed in a
loff_t.

Fix by casting the operands to loff_t.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Use a bvec rather than a kvec in afs_send_pages()
David Howells [Thu, 16 Mar 2017 16:27:46 +0000 (16:27 +0000)]
afs: Use a bvec rather than a kvec in afs_send_pages()

Use a bvec rather than a kvec in afs_send_pages() as we don't then have to
call kmap() in advance.  This allows us to pass the array of contiguous
pages that we extracted through to rxrpc in one go rather than passing a
single page at a time.

Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Make struct afs_read::remain 64-bit
David Howells [Thu, 16 Mar 2017 16:27:46 +0000 (16:27 +0000)]
afs: Make struct afs_read::remain 64-bit

Make struct afs_read::remain 64-bit so that it can handle huge transfers if
we ever request them or the server decides to give us a bit extra data (the
other fields there are already 64-bit).

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
7 years agoafs: Fix AFS read bug
David Howells [Thu, 16 Mar 2017 16:27:46 +0000 (16:27 +0000)]
afs: Fix AFS read bug

Fix a bug in AFS read whereby the request page afs_read::index isn't
incremented after calling ->page_done() if ->remain reaches 0, indicating
that the data read is complete.

Without this a NULL pointer exception happens when ->page_done() is called
twice for the last page because the page clearing loop will call it also
and afs_readpages_page_done() clears the current entry in the page list.

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: afs_readpages_page_done+0x21/0xa4 [kafs]
PGD 0
Oops: 0002 [#1] SMP
Modules linked in: kafs(E)
CPU: 2 PID: 3002 Comm: md5sum Tainted: G            E   4.10.0-fscache #485
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task: ffff8804017d86c0 task.stack: ffff8803fc1d8000
RIP: 0010:afs_readpages_page_done+0x21/0xa4 [kafs]
RSP: 0018:ffff8803fc1db978 EFLAGS: 00010282
RAX: ffff880405d39af8 RBX: 0000000000000000 RCX: ffff880407d83ed4
RDX: 0000000000000000 RSI: ffff880405d39a00 RDI: ffff880405c6f400
RBP: ffff8803fc1db988 R08: 0000000000000000 R09: 0000000000000001
R10: ffff8803fc1db820 R11: ffff88040cf56000 R12: ffff8804088f1780
R13: ffff8804017d86c0 R14: ffff8804088f1780 R15: 0000000000003840
FS:  00007f8154469700(0000) GS:ffff88041fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000004016ec000 CR4: 00000000001406e0
Call Trace:
 afs_deliver_fs_fetch_data+0x5b9/0x60e [kafs]
 ? afs_make_call+0x316/0x4e8 [kafs]
 ? afs_make_call+0x359/0x4e8 [kafs]
 afs_deliver_to_call+0x173/0x2e8 [kafs]
 ? afs_make_call+0x316/0x4e8 [kafs]
 afs_make_call+0x37a/0x4e8 [kafs]
 ? wake_up_q+0x4f/0x4f
 ? __init_waitqueue_head+0x36/0x49
 afs_fs_fetch_data+0x21c/0x227 [kafs]
 ? afs_fs_fetch_data+0x21c/0x227 [kafs]
 afs_vnode_fetch_data+0xf3/0x1d2 [kafs]
 afs_readpages+0x314/0x3fd [kafs]
 __do_page_cache_readahead+0x208/0x2c5
 ondemand_readahead+0x3a2/0x3b7
 ? ondemand_readahead+0x3a2/0x3b7
 page_cache_async_readahead+0x5e/0x67
 generic_file_read_iter+0x23b/0x70c
 ? __inode_security_revalidate+0x2f/0x62
 __vfs_read+0xc4/0xe8
 vfs_read+0xd1/0x15a
 SyS_read+0x4c/0x89
 do_syscall_64+0x80/0x191
 entry_SYSCALL64_slow_path+0x25/0x25

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
7 years agoafs: Prevent callback expiry timer overflow
Tina Ruchandani [Thu, 16 Mar 2017 16:27:46 +0000 (16:27 +0000)]
afs: Prevent callback expiry timer overflow

get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs_vnode record to use ktime_get_real_seconds() instead, for the
fields cb_expires and cb_expires_at.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
7 years agoafs: Migrate vlocation fields to 64-bit
Tina Ruchandani [Thu, 16 Mar 2017 16:27:46 +0000 (16:27 +0000)]
afs: Migrate vlocation fields to 64-bit

get_seconds() returns real wall-clock seconds. On 32-bit systems
this value will overflow in year 2038 and beyond. This patch changes
afs's vlocation record to use ktime_get_real_seconds() instead, for the
fields time_of_death and update_at.

Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>