[media] em28xx: move field 'pos' from struct em28xx_dmaqueue to struct em28xx_buffer

This field is used to keep track of the current memory position in the buffer,
not in the dma queue, so move it to right place.
This also allows us to get rid of the struct em28xx_dmaqueue pointer parameter
in functions em28xx_copy_video() and em28xx_copy_vbi().

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: remove obsolete field 'frame' from struct em28xx_buffer

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: use common function for video and vbi buffer completion

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: refactor get_next_buf() and use it for vbi data, too

get_next_buf() and vbi_get_next_buf() do exactly the same just with a
different dma queue and buffer. Saving the new buffer pointer back to the
device struct in em28xx_urb_data_copy() instead of doing this from inside
these functions makes it possible to get rid of one of them.
Also refactor the function parameters and return type:
- pass a pointer to struct em28xx as parameter (instead of obtaining the
  pointer from the dma queue pointer with the container_of macro) like we do
  it in all other functions
- instead of using a pointer-pointer, return the pointer to the new buffer
  as return value of the function

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: use common urb data copying function for vbi and non-vbi data streams

em28xx_urb_data_copy_vbi() is actually an extended version of
em28xx_urb_data_copy(). With the preceding fixes and improvements, it works
fine with both, vbi and non-vbi data streams without performance impacts.
So rename em28xx_urb_data_copy_vbi() to em28xx_urb_data_copy(), delete the
the old implementation of em28xx_urb_data_copy() and change the code to use
this function for both data stream types.
Tested with "SilverCrest 1.3 MPix webcam" (progressive, non-vbi) and
"Hauppauge HVR-900 (65008/A1C0)" (interlaced, vbi enabled and disabled).

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: em28xx_urb_data_copy_vbi(): calculate vbi_size only if needed

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: fix capture type setting in em28xx_urb_data_copy_vbi()

Set capture type to 1 (video start) when the video frame start header is
detected. This bug didn't cause any trouble, because this type of header is
never received in vbi mode.
Fix it, because we want to use this function with disabled vbi in the future.
Also start with capture type -1 to avoid processing of corrupted/incomplete
frame data which is usually received at streaming start (especially when
USB bulk transfers are used).

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: make sure the packet size is >= 4 before checking for headers in em28xx_urb_data_copy_vbi()

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: fix video data start position calculation in em28xx_urb_data_copy_vbi()

The header check/removal code at the end of function em28xx_urb_data_copy_vbi()
is obsolete, because this is already done earlier in this function.
In fact it is incomplete (doesn't check for vbi header) and causes trouble
when the first data bytes are the same as header bytes (which is fortunately
very unlikely).

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: add module parameter for selection of the preferred USB transfer type

By default, isoc transfers are used if possible.
With the new module parameter, bulk can be selected as the
preferred USB transfer type.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: improve USB endpoint logic, also use bulk transfers

The current enpoint logic ignores all bulk endpoints and uses
a fixed mapping between endpint addresses and the supported
data stream types (analog/audio/DVB):
  Ep 0x82, isoc => analog
  Ep 0x83, isoc => audio
  Ep 0x84, isoc => DVB
Now that the code can also do bulk transfers, the endpoint
logic has to be extended to also consider bulk endpoints.
The new logic preserves backwards compatibility and reflects
the endpoint configurations we have seen so far:
  Ep 0x82, isoc => analog
  Ep 0x82, bulk => analog
  Ep 0x83, isoc* => audio
  Ep 0x84, isoc => digital
  Ep 0x84, bulk => analog or digital**
 (*: audio should always be isoc)
 (**: analog, if ep 0x82 is isoc, otherwise digital)

[mchehab@redhat.com: Fix a CodingStyle issue: don't break strings
 into separate lines]

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: set USB alternate settings for analog video bulk transfers properly

Extend function em28xx_set_alternate:
- use alternate setting 0 for bulk transfers as default
- respect module parameter 'alt'=0 for bulk transfers
- set max_packet_size to 512 bytes for bulk transfers
[mchehab@redhat.com: Fix a CodingStyle issue: don't break strings
 into separate lines]
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: add fields for analog and DVB USB transfer type selection to struct em28xx

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: rename some USB parameter fields in struct em28xx to clarify their role

Also improve the comments.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: rename function em28xx_dvb_isoc_copy and extend for USB bulk transfers

The URB data processing for DVB bulk transfers is very similar to
what is done with isoc transfers, so create a common function that
works with both transfer types based on the existing isoc function.
Tested with device Hauppauge HVR-930c.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: rename function em28xx_isoc_copy_vbi and extend for USB bulk transfers

The URB data processing for bulk transfers is very similar to what
is done with isoc transfers, so create a common function that works
with both transfer types based on the existing isoc function.

[mchehab@redhat.com: Fix a CodingStyle issue: don't break strings
 into separate lines]

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: rename function em28xx_isoc_copy and extend for USB bulk transfers

The URB data processing for bulk transfers is very similar to what
is done with isoc transfers, so create a common function that works
with both transfer types based on the existing isoc function.

[mchehab@redhat.com: Fix a CodingStyle issue: don't break strings
 into separate lines]

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: remove double checks for urb->status == -ENOENT in urb_data_copy functions

This check is already done in the URB handler
em28xx_irq_callback before calling these functions.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: clear USB halt/stall condition in em28xx_init_usb_xfer when using bulk transfers

[mchehab@redhat.com: Fix a CodingStyle issue: don't break strings
 into separate lines]

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: create a common function for isoc and bulk USB transfer initialization

- rename em28xx_init_isoc to em28xx_init_usb_xfer
- add parameter for isoc/bulk transfer selection which is passed to em28xx_alloc_urbs
- rename local variable isoc_buf to usb_bufs

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: create a common function for isoc and bulk URB allocation and setup

Rename the existing function for isoc transfers em28xx_init_isoc
to em28xx_init_usb_xfer and extend it.
URB allocation and setup is now done depending on the USB
transfer type, which is selected with a new function parameter.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: rename function em28xx_uninit_isoc to em28xx_uninit_usb_xfer

This function will be used to uninitialize USB bulk transfers, too.
Also rename the local variable isoc_bufs to usb_bufs.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: update description of em28xx_irq_callback

em28xx_irq_callback can be used for isoc and bulk transfers.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: remove obsolete #define EM28XX_URB_TIMEOUT

It isn't used anymore and uses constants which no longer exist.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: rename struct em28xx_usb_isoc_ctl to em28xx_usb_ctl

Also rename the corresponding field isoc_ctl in struct em28xx
to usb_ctl.
We will use this struct for USB bulk transfers, too.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: rename struct em28xx_usb_isoc_bufs to em28xx_usb_bufs

It will be used for USB bulk transfers, too.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: rename isoc packet number constants and parameters

Rename EM28XX_NUM_PACKETS to EM28XX_NUM_ISOC_PACKETS and
EM28XX_DVB_MAX_PACKETS to EM28XX_DVB_NUM_ISOC_PACKETS to
clarify that these values are used only for isoc usb transfers.
Also use the term num_packets instead of max_packets, as this
is how these values are used and called in struct urb.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: clarify meaning of field 'progressive' in struct em28xx

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: fix wrong data offset for non-interlaced mode in em28xx_copy_video

em28xx_copy_video uses a wrong offset for the target buffer
when copying the data from an USB isoc packet. This happens
only for the second and all following lines in the packet.
The reason why this bug doesn't cause image corruption with
my test device (SilverCrest Webcam 1.3 MPix) is, that this
device never sends any packets that cross the end of a line.
I don't know if all devices behave like this, so this patch
should be considered for stable.
With the upcoming patches to add support for USB bulk transfers,
em28xx_copy_video will be called once per URB, which will
always trigger this bug.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: input: fix oops on device removal

When em28xx_ir_init() fails due to an configuration error, it frees the memory
of struct em28xx_IR *ir, but doesn't set the corresponding pointer in the
device struct to NULL.
On device removal, em28xx_ir_fini() gets called, which then calls
rc_unregister_device() with a pointer to freed memory.
Fixes bug 26572 (http://bugzilla.kernel.org/show_bug.cgi?id=26572)

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: add support for RC6 mode 0 on devices that support it

Newer em28xx chipsets (em2874 and upper) are capable of supporting
RC6 codes, on both mode 0 (command mode, 16 bits payload size, similar
to RC5, also called "Philips mode") and mode 6a (OEM command mode,
with offers a few alternatives with regards to the payload size).
I don't have any mode 6a control ATM to test it, so, I opted to add
support only to mode 0.
After this patch, adding support to mode 6a should not be hard.
Tested with a Philips television remote controller.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: add support for NEC proto variants on em2874 and upper

By disabling the NEC parity check, it is possible to handle all 3 NEC
protocol variants (32, 24 or 16 bits).
Change the driver in order to handle all of them.
Unfortunately, em2860/em2863 provide only 16 bits for the IR scancode,
even when NEC parity is disabled. So, this change should affect only
em2874 and newer devices, with provides up to 32 bits for the scancode.
Tested with one NEC-16, one NEC-24 and one RC5 IR.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

em28xx: add two missing tuners at the Kconfig file

Those two tuners may also be needed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Autoselect more relevant frontends for EM28XX DVB stick

I noticed that the EM28XX DVB driver doesn't auto select all of the
appropriate DVB tuner modules required. In particular I needed
DVB_LGDT3305 for my a340, but it looks like DVB_MT352 + DVB_S5H1409 were
missing as well.

Signed-Off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use dev_ printks in lirc/igorplugusb.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use dev_ or pr_ printks in lirc/lirc_imon.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use pr_ printks in lirc/lirc_serial.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use pr_ printks in lirc/lirc_parallel.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...
- WARNING: Prefer netdev_notice(netdev, ... then dev_notice(dev, ... then pr_notice(...  to printk(KERN_NOTICE ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use pr_ printks in lirc/lirc_bt829.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use pr_ printks in lirc/lirc_sir.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use dev_ or pr_ printks in lirc/lirc_sasem.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging/media: Use dev_ printks in solo6x10/p2m.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging/media: Use dev_ printks in go7007/s2250-board.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging/media: Use dev_ printks in go7007/wis-tw2804.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging/media: fixed spacing coding style in go7007/wis-uda1342.c

fixed below checkpatch error.
- ERROR: that open brace { should be on the previous line

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging/media: Use dev_ printks in go7007/wis-uda1342.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging/media: Use dev_ printks in go7007/go7007-v4l2.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging/media: Use dev_ printks in go7007/wis-tw9903.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Staging/media: fixed spacing coding style in go7007/wis-tw9903.c

fixed below checkpatch error.
- ERROR: that open brace { should be on the previous line

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000-dvb: Fix module unload

dvb_unregister_frontend has to be called before detach. Otherwise the
unregister call will segfault. This made tm6000-dvb module unload unusable.

Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use dev_ or pr_ printks in go7007/go7007-i2c.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use dev_ printks in go7007/s2250-loader.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use dev_ printks in go7007/wis-sony-tuner.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use dev_ printks in go7007/go7007-driver.c

fixed below checkpatch warning.
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: Call rc_register_device before irq setup

This should fix a potential race condition, when the irq handler
triggers while rc_register_device is still setting up the rdev->raw
device.
This crash has not been observed in practice, but there should be a very
small window where it could occur. Since ir_raw_event_store_with_filter
checks if rdev->raw is not NULL before using it, this bug is not
triggered if the request_irq triggers a pending irq directly (since
rdev->raw will still be NULL then).
This commit was tested on nuvoton-cir only.

Cc: Jarod Wilson <jarod@redhat.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: David Härdeman <david@hardeman.nu>
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: Set rdev before irq setup

This fixes a problem in fintek-cir and nuvoton-cir where the
irq handler would trigger during module load before the rdev member was
set, causing a NULL pointer crash.
It seems this crash is very reproducible (just bombard the receiver with
IR signals during module load), probably because when request_irq is
called, any pending intterupt is handled immediately, before
request_irq returns and rdev can be set.
This same crash was supposed to be fixed by commit
9ef449c6b31bb6a8e6dedc24de475a3b8c79be20 ("[media] rc: Postpone ISR
registration"), but the crash was still observed on the nuvoton-cir
driver.
This commit was tested on nuvoton-cir only.

Cc: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: Make probe cleanup goto labels more verbose

Before, labels were simply numbered. Now, the labels are named after the
cleanup action they'll perform (first), based on how the winbond-cir
driver does it. This makes the code a bit more clear and makes changes
in the ordering of labels easier to review.
This change is applied only to the rc drivers that do significant
cleanup in their probe functions: ati-remote, ene-ir, fintek-cir,
gpio-ir-recv, ite-cir, nuvoton-cir.
This commit should not change any code, it just renames goto labels.

[mchehab@redhat.com: removed changes at gpio-ir-recv.c, due to
 merge conflicts]

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: Optimize precalculate_line()

precalculate_line() is not very high on profile, but it calls expensive
gen_twopix(), so let's polish it too:
    call gen_twopix() only once for every color bar and then distribute
    the result.
before:
    # cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
    #
    # Samples: 46K of event 'cycles'
    # Event count (approx.): 15574200568
    #
    # Overhead          Command         Shared Object
    # ........  ...............  ....................
    #
        27.99%             rawv  libc-2.13.so          [.] __memcpy_ssse3
        23.29%           vivi-*  [kernel.kallsyms]     [k] memcpy
        10.30%             Xorg  [unknown]             [.] 0xa75c98f8
         5.34%           vivi-*  [vivi]                [k] gen_text.constprop.6
         4.61%             rawv  [vivi]                [k] gen_twopix
         2.64%             rawv  [vivi]                [k] precalculate_line
         1.37%          swapper  [kernel.kallsyms]     [k] read_hpet
after:
    # cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
    #
    # Samples: 45K of event 'cycles'
    # Event count (approx.): 15561769214
    #
    # Overhead          Command         Shared Object
    # ........  ...............  ....................
    #
        30.73%             rawv  libc-2.13.so          [.] __memcpy_ssse3
        26.78%           vivi-*  [kernel.kallsyms]     [k] memcpy
        10.68%             Xorg  [unknown]             [.] 0xa73015e9
         5.55%           vivi-*  [vivi]                [k] gen_text.constprop.6
         1.36%          swapper  [kernel.kallsyms]     [k] read_hpet
         0.96%             Xorg  [kernel.kallsyms]     [k] read_hpet
         ...
         0.16%             rawv  [vivi]                [k] precalculate_line
         ...
         0.14%             rawv  [vivi]                [k] gen_twopix
(i.e. gen_twopix and precalculate_line overheads are almost gone)

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: Move computations out of vivi_fillbuf linecopy loop

The "dev->mvcount % wmax" thing was showing high in profiles (we do it
for each line which ~ 500 per frame)
           ?     000010c0 <vivi_fillbuff>:
                 ...
      0,39 ? 70:???mov    0x3ff4(%edi),%esi
      0,22 ? 76:?  mov    0x2a0(%edi),%eax
      0,30 ?    ?  mov    -0x84(%ebp),%ebx
      0,35 ?    ?  mov    %eax,%edx
      0,04 ?    ?  mov    -0x7c(%ebp),%ecx
      0,35 ?    ?  sar    $0x1f,%edx
      0,44 ?    ?  idivl  -0x7c(%ebp)
     21,68 ?    ?  imul   %esi,%ecx
      0,70 ?    ?  imul   %esi,%ebx
      0,52 ?    ?  add    -0x88(%ebp),%ebx
      1,65 ?    ?  mov    %ebx,%eax
      0,22 ?    ?  imul   %edx,%esi
      0,04 ?    ?  lea    0x3f4(%edi,%esi,1),%edx
      2,18 ?    ?? call   vivi_fillbuff+0xa6
      0,74 ?    ?  addl   $0x1,-0x80(%ebp)
     62,69 ?    ?  mov    -0x7c(%ebp),%edx
      1,18 ?    ?  mov    -0x80(%ebp),%ecx
      0,35 ?    ?  add    %edx,-0x84(%ebp)
      0,61 ?    ?  cmp    %ecx,-0x8c(%ebp)
      0,22 ?    ???jne    70
so since all variables stay the same for all iterations let's move
computations out of the loop: the abovementioned division and
"width*pixelsize" too
before:
    # cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
    #
    # Samples: 49K of event 'cycles'
    # Event count (approx.): 16475832370
    #
    # Overhead          Command           Shared Object
    # ........  ...............  ......................
    #
        29.07%             rawv  libc-2.13.so            [.] __memcpy_ssse3
        20.57%           vivi-*  [kernel.kallsyms]       [k] memcpy
        10.20%             Xorg  [unknown]               [.] 0xa7301494
         5.16%           vivi-*  [vivi]                  [k] gen_text.constprop.6
         4.43%             rawv  [vivi]                  [k] gen_twopix
         4.36%           vivi-*  [vivi]                  [k] vivi_fillbuff
         2.42%             rawv  [vivi]                  [k] precalculate_line
         1.33%          swapper  [kernel.kallsyms]       [k] read_hpet
after:
    # cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
    #
    # Samples: 46K of event 'cycles'
    # Event count (approx.): 15574200568
    #
    # Overhead          Command         Shared Object
    # ........  ...............  ....................
    #
        27.99%             rawv  libc-2.13.so          [.] __memcpy_ssse3
        23.29%           vivi-*  [kernel.kallsyms]     [k] memcpy
        10.30%             Xorg  [unknown]             [.] 0xa75c98f8
         5.34%           vivi-*  [vivi]                [k] gen_text.constprop.6
         4.61%             rawv  [vivi]                [k] gen_twopix
         2.64%             rawv  [vivi]                [k] precalculate_line
         1.37%          swapper  [kernel.kallsyms]     [k] read_hpet
         0.79%             Xorg  [kernel.kallsyms]     [k] read_hpet
         0.64%             Xorg  [kernel.kallsyms]     [k] unix_poll
         0.45%             Xorg  [kernel.kallsyms]     [k] fget_light
         0.43%             rawv  libxcb.so.1.1.0       [.] 0x0000aae9
         0.40%            runsv  [kernel.kallsyms]     [k] ext2_try_to_allocate
         0.36%             Xorg  [kernel.kallsyms]     [k] _raw_spin_lock_irqsave
         0.31%           vivi-*  [vivi]                [k] vivi_fillbuff
(i.e. vivi_fillbuff own overhead is almost gone)

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: vivi_dev->line[] was not aligned

Though dev->line[] is u8 array we work with it as with u16, u24 or u32
pixels, and also pass it to memcpy() and it's better to align it to at
least 4.
Before the patch, on x86 offsetof(vivi_dev, line) was 1003 and after
patch it is 1004.
There is slight performance increase, but I think is is slight, only
because we start copying not from line[0]:
    ---- 8< ---- drivers/media/platform/vivi.c
    static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf)
    {
            ...
            for (h = 0; h < hmax; h++)
                    memcpy(vbuf + h * wmax * dev->pixelsize,
                           dev->line + (dev->mv_count % wmax) * dev->pixelsize,
                           wmax * dev->pixelsize);
before:
    # cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
    #
    # Samples: 49K of event 'cycles'
    # Event count (approx.): 16799780016
    #
    # Overhead          Command         Shared Object
    # ........  ...............  ....................
    #
        27.51%             rawv  libc-2.13.so          [.] __memcpy_ssse3
        23.77%           vivi-*  [kernel.kallsyms]     [k] memcpy
         9.96%             Xorg  [unknown]             [.] 0xa76f5e12
         4.94%           vivi-*  [vivi]                [k] gen_text.constprop.6
         4.44%             rawv  [vivi]                [k] gen_twopix
         3.17%           vivi-*  [vivi]                [k] vivi_fillbuff
         2.45%             rawv  [vivi]                [k] precalculate_line
         1.20%          swapper  [kernel.kallsyms]     [k] read_hpet
    23.77%           vivi-*  [kernel.kallsyms]     [k] memcpy
                     |
                     --- memcpy
                        |
                        |--99.28%-- vivi_fillbuff
                        |          vivi_thread
                        |          kthread
                        |          ret_from_kernel_thread
                         --0.72%-- [...]
after:
    # cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
    #
    # Samples: 49K of event 'cycles'
    # Event count (approx.): 16475832370
    #
    # Overhead          Command           Shared Object
    # ........  ...............  ......................
    #
        29.07%             rawv  libc-2.13.so            [.] __memcpy_ssse3
        20.57%           vivi-*  [kernel.kallsyms]       [k] memcpy
        10.20%             Xorg  [unknown]               [.] 0xa7301494
         5.16%           vivi-*  [vivi]                  [k] gen_text.constprop.6
         4.43%             rawv  [vivi]                  [k] gen_twopix
         4.36%           vivi-*  [vivi]                  [k] vivi_fillbuff
         2.42%             rawv  [vivi]                  [k] precalculate_line
         1.33%          swapper  [kernel.kallsyms]       [k] read_hpet

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: Optimize gen_text()

I've noticed that vivi takes a lot of CPU to produce its frames.
For example for 8 devices and 8 simple programs running, where each
captures YUY2 640x480 and displays it to X via SDL, profile timing is as
follows:
    # cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
    # Samples: 82K of event 'cycles'
    # Event count (approx.): 31551930117
    #
    # Overhead          Command         Shared Object                                                           Symbol
    # ........  ...............  ....................
    #
        49.48%           vivi-*  [vivi]                [k] gen_twopix
        10.79%           vivi-*  [kernel.kallsyms]     [k] memcpy
        10.02%             rawv  libc-2.13.so          [.] __memcpy_ssse3
         8.35%           vivi-*  [vivi]                [k] gen_text.constprop.6
         5.06%             Xorg  [unknown]             [.] 0xa73015f8
         2.32%             rawv  [vivi]                [k] gen_twopix
         1.22%             rawv  [vivi]                [k] precalculate_line
         1.20%           vivi-*  [vivi]                [k] vivi_fillbuff
    (rawv is display program, vivi-* is a combination of vivi-000 through vivi-007)
so a lot of time is spent in gen_twopix() which as the follwing
call-graph profile shows ...
    49.48%           vivi-*  [vivi]                [k] gen_twopix
                     |
                     --- gen_twopix
                        |
                        |--96.30%-- gen_text.constprop.6
                        |          vivi_fillbuff
                        |          vivi_thread
                        |          kthread
                        |          ret_from_kernel_thread
                        |
                         --3.70%-- vivi_fillbuff
                                   vivi_thread
                                   kthread
                                   ret_from_kernel_thread
... is called mostly from gen_text().
If we'll look at gen_text(), in the inner loop, we'll see
    if (chr & (1 << (7 - i)))
            gen_twopix(dev, pos + j * dev->pixelsize, WHITE, (x+y) & 1);
    else
            gen_twopix(dev, pos + j * dev->pixelsize, TEXT_BLACK, (x+y) & 1);
which calls gen_twopix() for every character pixel, and that is very
expensive, because gen_twopix() branches several times.
Now, let's note, that we operate on only two colors - WHITE and
TEXT_BLACK, and that pixel for that colors could be precomputed and
gen_twopix() moved out of the inner loop. Also note, that for black
and white colors even/odd does not make a difference for all supported
pixel formats, so we could stop doing that `odd` gen_twopix() parameter
game.
So the first thing we are doing here is
    1) moving gen_twopix() calls out of gen_text() into vivi_fillbuff(),
       to pregenerate black and white colors, just before printing
       starts.
what we have next is that gen_text's font rendering loop, even with
gen_twopix() calls moved out, was inefficient and branchy, so let's
    2) rewrite gen_text() loop so it uses less variables + unroll char
       horizontal-rendering loop + instantiate 3 code paths for pixelsizes 2,3
       and 4 so that in all inner loops we don't have to branch or make
       indirections (*).
Done all above reworks, for gen_text() we get nice, non-branchy
streamlined code (showing loop for pixelsize=2):
           ?       cmp    $0x2,%eax
           ?     ? jne    26
           ?       mov    -0x18(%ebp),%eax
           ?       mov    -0x20(%ebp),%edi
           ?       imul   -0x20(%ebp),%eax
           ?       movzwl 0x3ffc(%ebx),%esi
      0,08 ?       movzwl 0x4000(%ebx),%ecx
      0,04 ?       add    %edi,%edi
           ?       mov    0x0,%ebx
      0,51 ?       mov    %edi,-0x1c(%ebp)
           ?       mov    %ebx,-0x14(%ebp)
           ?       movl   $0x0,-0x10(%ebp)
           ?       lea    0x20(%edx,%eax,2),%eax
           ?       mov    %eax,-0x18(%ebp)
           ?       xchg   %ax,%ax
      0,04 ? a0:   mov    0x8(%ebp),%ebx
           ?       mov    -0x18(%ebp),%eax
      0,04 ?       movzbl (%ebx),%edx
      0,16 ?       test   %dl,%dl
      0,04 ?     ? je     128
      0,08 ?       lea    0x0(%esi),%esi
      1,61 ? b0:???shl    $0x4,%edx
      1,02 ?    ?  mov    -0x14(%ebp),%edi
      2,04 ?    ?  add    -0x10(%ebp),%edx
      2,24 ?    ?  lea    0x1(%ebx),%ebx
      0,27 ?    ?  movzbl (%edi,%edx,1),%edx
      9,92 ?    ?  mov    %esi,%edi
      0,39 ?    ?  test   %dl,%dl
      2,04 ?    ?  cmovns %ecx,%edi
      4,63 ?    ?  test   $0x40,%dl
      0,55 ?    ?  mov    %di,(%eax)
      3,76 ?    ?  mov    %esi,%edi
      0,71 ?    ?  cmove  %ecx,%edi
      3,41 ?    ?  test   $0x20,%dl
      0,75 ?    ?  mov    %di,0x2(%eax)
      2,43 ?    ?  mov    %esi,%edi
      0,59 ?    ?  cmove  %ecx,%edi
      4,59 ?    ?  test   $0x10,%dl
      0,67 ?    ?  mov    %di,0x4(%eax)
      2,55 ?    ?  mov    %esi,%edi
      0,78 ?    ?  cmove  %ecx,%edi
      4,31 ?    ?  test   $0x8,%dl
      0,67 ?    ?  mov    %di,0x6(%eax)
      5,76 ?    ?  mov    %esi,%edi
      1,80 ?    ?  cmove  %ecx,%edi
      4,20 ?    ?  test   $0x4,%dl
      0,86 ?    ?  mov    %di,0x8(%eax)
      2,98 ?    ?  mov    %esi,%edi
      1,37 ?    ?  cmove  %ecx,%edi
      4,67 ?    ?  test   $0x2,%dl
      0,20 ?    ?  mov    %di,0xa(%eax)
      2,78 ?    ?  mov    %esi,%edi
      0,75 ?    ?  cmove  %ecx,%edi
      3,92 ?    ?  and    $0x1,%edx
      0,75 ?    ?  mov    %esi,%edx
      2,59 ?    ?  mov    %di,0xc(%eax)
      0,59 ?    ?  cmove  %ecx,%edx
      3,10 ?    ?  mov    %dx,0xe(%eax)
      2,39 ?    ?  add    $0x10,%eax
      0,51 ?    ?  movzbl (%ebx),%edx
      2,86 ?    ?  test   %dl,%dl
      2,31 ?    ???jne    b0
      0,04 ?128:   addl   $0x1,-0x10(%ebp)
      4,00 ?       mov    -0x1c(%ebp),%eax
      0,04 ?       add    %eax,-0x18(%ebp)
      0,08 ?       cmpl   $0x10,-0x10(%ebp)
           ?     ? jne    a0
which almost goes away from the profile:
    # cmdline : /home/kirr/local/perf/bin/perf record -g -a sleep 20
    # Samples: 49K of event 'cycles'
    # Event count (approx.): 16799780016
    #
    # Overhead          Command         Shared Object                                                           Symbol
    # ........  ...............  ....................
    #
        27.51%             rawv  libc-2.13.so          [.] __memcpy_ssse3
        23.77%           vivi-*  [kernel.kallsyms]     [k] memcpy
         9.96%             Xorg  [unknown]             [.] 0xa76f5e12
         4.94%           vivi-*  [vivi]                [k] gen_text.constprop.6
         4.44%             rawv  [vivi]                [k] gen_twopix
         3.17%           vivi-*  [vivi]                [k] vivi_fillbuff
         2.45%             rawv  [vivi]                [k] precalculate_line
         1.20%          swapper  [kernel.kallsyms]     [k] read_hpet
i.e. gen_twopix() overhead dropped from 49% to 4% and gen_text() loops
from ~8% to ~4%, and overal cycles count dropped from 31551930117 to
16799780016 which is ~1.9x whole workload speedup.
(*) for RGB24 rendering I've introduced x24, which could be thought as
    synthetic u24 for simplifying the code. That's done because for
    memcpy used for conditional assignment, gcc generates suboptimal code
    with more indirections.
    Fortunately, in C struct assignment is builtin and that's all we
    need from pixeltype for font rendering.

Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging/media: Use dev_ printks in cxd2099/cxd2099.[ch]

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda18212: tda18218: use 'val' if initialized

Commits e666a44fa313cb9329c0381ad02fc6ee1e21cb31 ("[media] tda18212:
silence compiler warning") and e0e52d4e9f5bce7ea887027c127473eb654a5a04
("[media] tda18218: silence compiler warning") silenced warnings
equivalent to these:
    drivers/media/tuners/tda18212.c: In function ‘tda18212_attach’:
    drivers/media/tuners/tda18212.c:299:2: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
    drivers/media/tuners/tda18218.c: In function ‘tda18218_attach’:
    drivers/media/tuners/tda18218.c:305:2: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
But in both cases 'val' will still be used uninitialized if the calls
of tda18212_rd_reg() or tda18218_rd_reg() fail. Fix this by only
printing the "chip id" if the calls of those functions were successful.
This allows to drop the uninitialized_var() stopgap measure.
Also stop printing the return values of tda18212_rd_reg() or
tda18218_rd_reg(), as these are not interesting.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] budget-av: only use t_state if initialized

Building budget-av.o triggers this GCC warning:
    In file included from drivers/media/pci/ttpci/budget-av.c:44:0:
    drivers/media/dvb-frontends/tda8261_cfg.h: In function ‘tda8261_get_bandwidth’:
    drivers/media/dvb-frontends/tda8261_cfg.h:68:21: warning: ‘t_state.bandwidth’ may be used uninitialized in this function [-Wuninitialized]
Move the printk() that uses t_state.bandwith to the location where it
should be initialized to fix this.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: media: Fix minor typo in staging/media

Correct spelling typo in comment witin staging/media.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: ov7670: Allow 32x maximum gain for yuv422

4x gain ceiling is not enough to capture a decent image in conditions
of total darkness and only a LED light source. Allow a maximum gain
of 32x instead.
This doesn't have any drawback since the image quality in 'normal'
light conditions is the same.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: m2m-deinterlace: Do not set debugging flag to true

Default value should be 'debugging disabled'.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/pci/saa7134/saa7134-dvb.c: Test if videobuf_dvb_get_frontend return NULL

Based on commit: e66131cee501ee720b7b58a4b87073b8fbaaaba6
Not testing videobuf_dvb_get_frontend output may cause OOPS if it return
NULL. This patch fixes this issue.
The semantic patch that found this issue is(http://coccinelle.lip6.fr/):
// <smpl>
@@
identifier i,a,b;
statement S, S2;
@@
i = videobuf_dvb_get_frontend(...);
... when != if (!i) S
* if (i->a.b)
S2
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: coda: Fix H.264 header alignment - v2

Length of H.264 headers is variable and thus it might not be
aligned for the coda to append the encoded frame. This causes
the first frame to overwrite part of the H.264 PPS.
In order to solve that, a filler NAL must be added between
the headers and the first frame to preserve alignment.

[mchehab@redhat.com: applied only v2 diff here, as v1 ended by mistakenly
 being applied]
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: coda: Fix H.264 header alignment

Length of H.264 headers is variable and thus it might not be
aligned for the coda to append the encoded frame. This causes
the first frame to overwrite part of the H.264 PPS.
In order to solve that, a filler NAL must be added between
the headers and the first frame to preserve alignment.

[mchehab@redhat.com: Fix a few CodingStyle issues]
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: Fix double free in gpio_ir_recv_remove()

Since rc_unregister_device() frees its argument there's no need to
subsequently call rc_free_device() on the same variable - in fact it's
a double free bug.
Easily fixed by just removing the rc_free_device() call.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc: Fix double free in gpio_ir_recv_probe()

At the 'err_request_irq' label, rc_unregister_device(rcdev) frees its
argument. So when we fall through to the 'err_gpio_request' label
further down and call rc_free_device(rcdev) then that's a double free.
Fix that by moving 'rcdev = NULL' from after the call to
rc_free_device() to after rc_unregister_device(). That fixes the
problem since rc_free_device() just does nothing if passed NULL and
there's no further use of 'rcdev' after the call to rc_free_device()
so it's not needed there.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda10071: fix a warning introduced by changeset 41f55d5755

The two new tests don't set the returned value.

Cc: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda10071: make sure both tuner and demod i2c addresses are specified

display an error message if either tuner_i2c_addr or demod_i2c_addr
are not specified in the tda10071_config structure

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] or51211: apply pr_fmt and use pr_* macros instead of printk

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ix2505v: use %*ph[N] to dump small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] or51211: use %*ph[N] to dump small buffers

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpbe: remove unused variable in vpbe_initialize()

The variable 'output_index' is initialized but never used
otherwise, so remove the unused variable.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Prabhakar Lad <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: davinci: vpbe: return error code on error in vpbe_display_g_crop()

We have assigned error code to 'ret' if crop->type is not
V4L2_BUF_TYPE_VIDEO_OUTPUT, but never use it.
We'd better return the error code on this error.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Prabhakar Lad <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: davinci: vpbe: fix return value check in vpbe_display_reqbufs()

In case of error, the function vb2_dma_contig_init_ctx() returns
ERR_PTR() and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Prabhakar Lad <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: davinci: vpbe: enable building of vpbe driver for DM355 and DM365

This patch allows enabling building of VPBE display driver for DM365
and DM355. This also removes unnecessary entry VIDEO_DM644X_VPBE
in Kconfig, which could have been done with single entry, and
appropriate changes in Makefile for building.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpbe: pass different platform names to handle different ip's

The vpbe driver can handle different platforms DM644X, DM36X and
DM355. To differentiate between this platforms venc_type/vpbe_type
was passed as part of platform data which was incorrect. The correct
way to differentiate to handle this case is by passing different
platform names.
This patch creates platform_device_id[] array supporting different
platforms and assigns id_table to the platform driver, and finally
in the probe gets the actual device by using platform_get_device_id()
and gets the appropriate driver data for that platform.
Taking this approach will also make the DT transition easier.

Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpfe: Add documentation and TODO

Add documentation on the Davinci VPFE driver. Document the subdevs,
and private IOTCLs the driver implements. This patch also includes
the TODO's to fit into drivers/media/ folder.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpfe: dm365: add build infrastructure for capture driver

add build infrastructure for dm365 specific modules for VPFE
capture driver.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpfe: dm365: resizer driver based on media framework

Add the video resizer driver with the v4l2 media controller framework
which takes care of resizing the video frames with both up-scaling
downscaling facility. The driver supports both continuous and
single shot operations.The driver supports resizer as a subdevice
and a media entity. It has support for 2 resizers - resizerA
and resizerB.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpfe: dm365: add IPIPE hardware layer support

IPIPE is the hardware IP which implements the functionality
required for resizer, ipipe(colorspace converter) and
the associated hardware support. This patch implements hardware
setup including coefficient programming for various hardware
filters, gamma, cfa and clock enabling.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpfe: dm365: add IPIPE support for media controller driver

Add the IPIPE subdevice to the DM365 vpfe driver. The IPIPE is the
major sub IP in the DM365 capture VPFE hardware and implements
black clamping, color space conversion, edge enhancements etc.
the block is exposed as a subdevice and implements media controller
based setup and a private IOCTL for fine grain control.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpfe: dm365: add ISIF driver based on media framework

add support for ISIF as a subdevice for dm365 vpfe capture driver.
ISIF is responsible for capturing video data both in raw bayer format
on sync seperate signals and YUV through BT656/1120 interfaces.
ISIF is exposed as a subdev for the vpfe driver and allows users to
use the driver through standard media controller interface.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpfe: dm365: add IPIPEIF driver based on media framework

add support for dm365 IPIPEIF driver based on media framework.
The IPIPEIF is exposed as a subdev, and it supports features
like fault pixel correction, dark frame subtraction and other
necessary hardware setup.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpfe: add v4l2 video driver support

Add a generic video driver functionality to be used by all the vpfe
drivers for davinci SoCs. The functionality includes all the
standard v4l2 interfaces including streaming. The video node
interface can be used both as an input and output node for both
continuous and single shot modes. Also supports dv_presets to include
HD modes, wth support for both user pointer IO and mmap. The buffering
mechanism is based on videobuf2 interface.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpfe: add v4l2 capture driver with media interface

Add the vpfe capture driver which implements media controller
interface. The driver supports the DM365 sub ip units for capture
namely - ISIF, IPIPE, IPIPEIF, Resizer. This file represents the main
driver which does isr registration, v4l2 device registration,
media registration and platform driver registrations.
It calls the appropriate subdevs from here to create subdevices
and media entities.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci/vpss: add helper functions for setting hw params

Add vpss helper functions to be used in the main driver for setting
hardware parameters.

Add interface functions to set sync polarity, interrupt completion and
pageframe size in vpss to be used by the main driver.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpss: dm365: set vpss clk ctrl

request_mem_region for VPSS_CLK_CTRL register and ioremap.
and enable clocks appropriately.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci: vpss: dm365: enable ISP registers

enable the clocks required for VPFE to work in PCCR register,
and enbale ISIF out on BCR to get the correct operation from ISIF.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] s5p-fimc: Improved pipeline try format routine

Make the pipeline try format routine more generic to support any
number of subdevs in the pipeline, rather than hard coding it for
only a sensor, MIPI-CSIS and FIMC subdevs and the FIMC video node.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_sonixj: Add a small delay after i2c_w1

We already have the same delay in i2c_w8, but it was missing from i2c_w1,
adding this delay fixes the Microsoft VX-3000 camera often (but not always)
streaming video data with a very green-ish tint.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_sonixb: Properly wait between i2c writes

We must wait for the previous i2c write to complete before starting a new
one. Sofar we were getting away with this, but it seems that some parts
of the usb-subsystem has been sped up making us go to fast :)
This fixes streaming on sn9c103 based cams not working with an
"i2c_w error" error.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_t613: Fix compiling with GSPCA_DEBUG defined

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_stv06xx: Disable flip controls for vv6410 sensor

Disable the hardware VFLIP and HFLIP controls for now as we lack a
mechanism to adjust the frame offset, thus rending a bayerimage not
compliant with the announced format.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: Use module_usb_driver macro

module_usb_driver eliminates a lot of boilerplate by replacing
module_init() and module_exit() calls.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>