Linus Torvalds [Thu, 26 Mar 2009 23:03:04 +0000 (16:03 -0700)]
Merge branch 'for-2.6.30' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.30' of git://git.kernel.dk/linux-2.6-block:
Get rid of pdflush_operation() in emergency sync and remount
btrfs: get rid of current_is_pdflush() in btrfs_btree_balance_dirty
Move the default_backing_dev_info out of readahead.c and into backing-dev.c
block: Repeated lines in switching-sched.txt
bsg: Remove bogus check against request_queue->max_sectors
block: WARN in __blk_put_request() for potential bio leak
loop: fix circular locking in loop_clr_fd()
loop: support barrier writes
bsg: add support for tail queuing
cpqarray: enable bus mastering
block: genhd.h cleanup patch
block: add private bio_set for bio integrity allocations
block: genhd.h comment needs updating
block: get rid of unused blkdev_free_rq() define
block: remove various blk_queue_*() setting functions in blk_init_queue_node()
cciss: add BUILD_BUG_ON() for catching bad CommandList_struct alignment
block: don't create bio_vec slabs of less than the inline number
block: cleanup bio_alloc_bioset()
Linus Torvalds [Thu, 26 Mar 2009 22:56:53 +0000 (15:56 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc64: Flush TLB before releasing pages.
Linus Torvalds [Thu, 26 Mar 2009 22:54:36 +0000 (15:54 -0700)]
Merge git://git./linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits)
ixgbe: Allow Priority Flow Control settings to survive a device reset
net: core: remove unneeded include in net/core/utils.c.
e1000e: update version number
e1000e: fix close interrupt race
e1000e: fix loss of multicast packets
e1000e: commonize tx cleanup routine to match e1000 & igb
netfilter: fix nf_logger name in ebt_ulog.
netfilter: fix warning in ebt_ulog init function.
netfilter: fix warning about invalid const usage
e1000: fix close race with interrupt
e1000: cleanup clean_tx_irq routine so that it completely cleans ring
e1000: fix tx hang detect logic and address dma mapping issues
bridge: bad error handling when adding invalid ether address
bonding: select current active slave when enslaving device for mode tlb and alb
gianfar: reallocate skb when headroom is not enough for fcb
Bump release date to 25Mar2009 and version to 0.22
r6040: Fix second PHY address
qeth: fix wait_event_timeout handling
qeth: check for completion of a running recovery
qeth: unregister MAC addresses during recovery.
...
Manually fixed up conflicts in:
drivers/infiniband/hw/cxgb3/cxio_hal.h
drivers/infiniband/hw/nes/nes_nic.c
Linus Torvalds [Thu, 26 Mar 2009 22:48:11 +0000 (15:48 -0700)]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] i6300esb.c: start locking
[WATCHDOG] i6300esb.c: convert to platform device driver
[WATCHDOG] wdt.c: remove #ifdef CONFIG_WDT_501
[WATCHDOG] Fix io.h & uaccess.h includes.
[WATCHDOG] More coding-style and trivial clean-up
[WATCHDOG] struct file_operations should be const
[WATCHDOG] cpwd.c: Coding style - Clean-up
[WATCHDOG] hpwdt.c: Add new HP BMC controller.
[PATCH 13/13] drivers/watchdog: use USB API functions rather than constants
[WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform data
[WATCHDOG] rc32434_wdt: make sure watchdog is not running at startup
[WATCHDOG] rc32434_wdt: add spin_locking
[WATCHDOG] rc32434_wdt: add shutdown method
[WATCHDOG] rc32434_wdt: add timeout module parameter
[WATCHDOG] rc32434_wdt: clean-up driver
[WATCHDOG] davinci: convert to ioremap() + io[read|write]
[WATCHDOG] w83697ug: add error checking
[WATCHDOG] cpwd.c & riowd.c - unlocked_ioctl
Linus Torvalds [Thu, 26 Mar 2009 22:47:52 +0000 (15:47 -0700)]
Merge branch 'kvm-updates/2.6.30' of git://git./virt/kvm/kvm
* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (113 commits)
KVM: VMX: Don't allow uninhibited access to EFER on i386
KVM: Correct deassign device ioctl to IOW
KVM: ppc: e500: Fix the bug that KVM is unstable in SMP
KVM: ppc: e500: Fix the bug that mas0 update to wrong value when read TLB entry
KVM: Fix missing smp tlb flush in invlpg
KVM: Get support IRQ routing entry counts
KVM: fix sparse warnings: Should it be static?
KVM: fix sparse warnings: context imbalance
KVM: is_long_mode() should check for EFER.LMA
KVM: VMX: Update necessary state when guest enters long mode
KVM: ia64: Fix the build errors due to lack of macros related to MSI.
ia64: Move the macro definitions related to MSI to one header file.
KVM: fix kvm_vm_ioctl_deassign_device
KVM: define KVM_CAP_DEVICE_DEASSIGNMENT
KVM: ppc: Add emulation of E500 register mmucsr0
KVM: Report IRQ injection status for MSI delivered interrupts
KVM: MMU: Fix another largepage memory leak
KVM: SVM: set accessed bit for VMCB segment selectors
KVM: Report IRQ injection status to userspace.
KVM: MMU: remove assertion in kvm_mmu_alloc_page
...
Linus Torvalds [Thu, 26 Mar 2009 22:47:08 +0000 (15:47 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (30 commits)
RDMA/cxgb3: Enforce required firmware
IB/mlx4: Unregister IB device prior to CLOSE PORT command
mlx4_core: Add link type autosensing
mlx4_core: Don't perform SET_PORT command for Ethernet ports
RDMA/nes: Handle MPA Reject message properly
RDMA/nes: Improve use of PBLs
RDMA/nes: Remove LLTX
RDMA/nes: Inform hardware that asynchronous event has been handled
RDMA/nes: Fix tmp_addr compilation warning
RDMA/nes: Report correct vendor_id and vendor_part_id
RDMA/nes: Update copyright to new legal entity and year
RDMA/nes: Account for freed PBL after HW operation
IB: Remove useless ibdev_is_alive() tests from sysfs code
IB/sa_query: Fix AH leak due to update_sm_ah() race
IB/mad: Fix ib_post_send_mad() returning 0 with no generate send comp
IB/mad: initialize mad_agent_priv before putting on lists
IB/mad: Fix null pointer dereference in local_completions()
IB/mad: Fix RMPP header RRespTime manipulation
IB/iser: Remove hard setting of path MTU
mlx4_core: Add device IDs for MT25458 10GigE devices
...
Linus Torvalds [Thu, 26 Mar 2009 22:46:37 +0000 (15:46 -0700)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Fix memory overwrite when saving nativeFileSystem field during mount
[CIFS] Rename compose_mount_options to cifs_compose_mount_options.
[CIFS] work around bug in Samba server handling for posix open
[CIFS] Use posix open on file open when server supports it
cifs: fix buffer format byte on NT Rename/hardlink
[CIFS] Add definitions for remoteably fsctl calls
[CIFS] add extra null attr check
[CIFS] fix build error
[CIFS] reopen file via newer posix open protocol operation if available
[CIFS] Add new nostrictsync cifs mount option to avoid slow SMB flush
[CIFS] DFS no longer experimental
[CIFS] Send SMB flush in cifs_fsync
Alan Cox [Thu, 26 Mar 2009 20:47:00 +0000 (20:47 +0000)]
dontdiff: Fix asm exclude
Now that the headers are in arch/foo/include/asm we don't want to exclude
them when preparing diff files.
Closes-bug: 12921
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Thu, 26 Mar 2009 12:08:04 +0000 (13:08 +0100)]
ext3: Avoid starting a transaction in writepage when not necessary
We don't have to start a transaction in writepage() when all the blocks
are a properly allocated. Even in ordered mode either the data has been
written via write() and they are thus already added to transaction's list
or the data was written via mmap and then it's random in which transaction
they get written anyway.
This should help VM to pageout dirty memory without blocking on transaction
commits.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Thu, 26 Mar 2009 22:23:24 +0000 (15:23 -0700)]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
drivers/net/wimax/i2400m/usb-notif.c
Linus Torvalds [Thu, 26 Mar 2009 18:20:23 +0000 (11:20 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (35 commits)
[libata] Improve timeout handling
[libata] Drain data on errors
pata_sc1200: Activate secondary channel
pata_artop: Serializing support
[libata] ahci: correct enclosure LED state save
[libata] More robust parsing for IDENTIFY DEVICE multi_count field
sata_mv: fix LED blinking for SoC+NCQ
sata_mv: optimize IRQ coalescing for 8-port chips
sata_mv: implement IRQ coalescing (v2)
sata_mv: cosmetic preparations for IRQ coalescing
pata-rb532-cf: platform_get_irq() fix ignored failure
pata_efar: fix *dma_mask
pata_radisys: fix mwdma_mask to exclude mwdma0
[libata] convert drivers to use ata.h mode mask defines
include/linux/ata.h: add some more transfer masks
ahci: Blacklist HP Compaq 6720s that spins off disks during ACPI power off
[libata] sata_mv: Implement direct FIS transmission via mv_qc_issue_fis().
[libata] Export ata_pio_queue_task() so that it can be used from sata_mv.
[libata] sata_mv: Add a new mv_sff_check_status() function to sata_mv.
[libata] sata_mv: Tighten up interrupt masking in mv_qc_issue()
...
Linus Torvalds [Thu, 26 Mar 2009 18:17:39 +0000 (11:17 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits)
USB: qcserial: add device id for HP devices
USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c
USB: allow malformed LANGID descriptors
USB: pxa27x_udc: typo fixes and code cleanups
USB: gadget: gadget zero uses new suspend/resume hooks
USB: gadget: composite device-level suspend/resume hooks
USB: r8a66597-hcd: suspend/resume support
USB: more u32 conversion after transfer_buffer_length and actual_length
USB: Fix cp2101 USB serial device driver termios functions for console use
USB: CP2101 New Device ID
USB: ipaq: handle 4 endpoint devices
USB: S3C: Move usb-control.h to platform include
USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue
USB: pedantic: spelling correction in comment for ch9.h
USB: host: fix sparse warning: Using plain integer as NULL pointer
USB: ohci-s3c2410: fix name of bus clock
USB: ohci-s3c2410: remove <mach/hardware.h> include
USB: serial: rename cp2101 driver to cp210x
USB: CP2101 Reduce Error Logging
USB: CP2101 Support AN205 baud rates
...
Linus Torvalds [Thu, 26 Mar 2009 18:17:04 +0000 (11:17 -0700)]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits)
Dynamic debug: fix pr_fmt() build error
Dynamic debug: allow simple quoting of words
dynamic debug: update docs
dynamic debug: combine dprintk and dynamic printk
sysfs: fix some bin_vm_ops errors
kobject: don't block for each kobject_uevent
sysfs: only allow one scheduled removal callback per kobj
Driver core: Fix device_move() vs. dpm list ordering, v2
Driver core: some cleanup on drivers/base/sys.c
Driver core: implement uevent suppress in kobject
vcs: hook sysfs devices into object lifetime instead of "binding"
driver core: fix passing platform_data
driver core: move platform_data into platform_device
sysfs: don't block indefinitely for unmapped files.
driver core: move knode_bus into private structure
driver core: move knode_driver into private structure
driver core: move klist_children into private structure
driver core: create a private portion of struct device
driver core: remove polling for driver_probe_done(v5)
sysfs: reference sysfs_dirent from sysfs inodes
...
Fixed conflicts in drivers/sh/maple/maple.c manually
Linus Torvalds [Thu, 26 Mar 2009 18:13:06 +0000 (11:13 -0700)]
Merge git://git./linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (53 commits)
ide: use try_to_identify() in ide_driveid_update()
ide: clear drive IRQ after re-enabling local IRQs in ide_driveid_update()
ide: sanitize SELECT_MASK() usage in ide_driveid_update()
ide: classify device type in do_probe()
ide: remove broken EXABYTENEST support
ide: shorten timeout value in ide_driveid_update()
ide: propagate AltStatus workarounds to ide_driveid_update()
ide: fix kmalloc() failure handling in ide_driveid_update()
mn10300: remove <asm/ide.h>
frv: remove <asm/ide.h>
ide: remove pciirq argument from ide_pci_setup_ports()
ide: fix ->init_chipset method to return 'int' value
ide: remove try_to_identify() wrapper
ide: remove no longer needed IRQ auto-probing from try_to_identify() (v2)
ide: remove no longer needed IRQ fallback code from hwif_init()
amd74xx: remove no longer needed ->init_hwif method
ide: remove no longer needed IDE_HFLAG[_FORCE]_LEGACY_IRQS
ide: use ide_pci_is_in_compatibility_mode() in ide_pci_init_{one,two}()
ide: use pci_get_legacy_ide_irq() in ide_pci_init_{one,two}()
ide: handle IDE_HFLAG[_FORCE]_LEGACY_IRQS in ide_pci_init_{one,two}()
...
Linus Torvalds [Thu, 26 Mar 2009 18:11:23 +0000 (11:11 -0700)]
Merge git://git./linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (96 commits)
sh: add support for SMSC Polaris platform
sh: fix the HD64461 level-triggered interrupts handling
sh: sh-rtc wakeup support
sh: sh-rtc invalid time rework
sh: sh-rtc carry interrupt rework
sh: disallow kexec virtual entry
sh: kexec jump: fix for ftrace.
sh: kexec: Drop SR.BL bit toggling.
sh: add kexec jump support
sh: rework kexec segment code
sh: simplify kexec vbr code
sh: Flush only the needed range when unmapping a VMA.
sh: Update debugfs ASID dumping for 16-bit ASID support.
sh: tlb-pteaex: Kill off legacy PTEA updates.
sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores.
sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp
sh: espt-giga board support
sh: dma: Make G2 DMA configurable.
sh: dma: Make PVR2 DMA configurable.
sh: Move IRQ multi definition of DMAC to defconfig
...
Linus Torvalds [Thu, 26 Mar 2009 18:08:47 +0000 (11:08 -0700)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
GFS2: Fix freeze issue
Fix a minor bug in the previous patch
GFS2: Clean up of glops.c
GFS2: Fix locking bug in failed shared to exclusive conversion
GFS2: Pagecache usage optimization on GFS2
GFS2: fix sparse warning: Should it be static?
GFS2: fix sparse warnings: constant is so big it is ...
GFS2: Support quota/noquota mount arguments
GFS2: Fix alignment issue and tidy gfs2_bitfit
GFS2: Add a "demote a glock" interface to sysfs
GFS2: Expose UUID via sysfs/uevent
GFS2: Support generation of discard requests
GFS2: Fix deadlock on journal flush
GFS2: Fix error path ref counting for root inode
GFS2: Remove unused field from glock
GFS2: Merge lock_dlm module into GFS2
GFS2: Remove "double" locking in quota
GFS2: change gfs2_quota_scan into a shrinker
GFS2: Bring back lvb-related stuff to lock_nolock to support quotas
GFS2: Fix remount argument parsing
Linus Torvalds [Thu, 26 Mar 2009 18:05:58 +0000 (11:05 -0700)]
Merge git://git./linux/kernel/git/hskinnemoen/avr32-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
avr32: remove duplicated #include
avr32: fix out-of-range rjmp instruction on large kernels
avr32: Fix out-of-range rcalls in large kernels
Linus Torvalds [Thu, 26 Mar 2009 18:05:17 +0000 (11:05 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (430 commits)
ALSA: hda - Add quirk for Acer Ferrari 5000
ALSA: hda - Use cached calls to get widget caps and pin caps
ALSA: hda - Don't create empty/single-item input source
ALSA: hda - Fix the wrong pin-cap check in patch_realtek.c
ALSA: hda - Cache pin-cap values
ALSA: hda - Avoid output amp manipulation to digital mic pins
ALSA: hda - Add function id to proc output
ALSA: pcm - Safer boundary checks
ALSA: hda - Detect digital-mic inputs on ALC663 / ALC272
ALSA: sound/ali5451: typo: s/resouces/resources/
ALSA: hda - Don't show the current connection for power widgets
ALSA: Fix wrong pointer to dev_err() in arm/pxa2xx-ac97-lib.c
ASoC: Declare Headset as Mic and Headphone widgets for SDP3430
ASoC: OMAP: N810: Add more jack functions
ASoC: OMAP: N810: Mark not connected input pins
ASoC: Add FLL support for WM8400
ALSA: hda - Don't reset stream at each prepare callback
ALSA: hda - Don't reset BDL unnecessarily
ALSA: pcm - Fix delta calculation at boundary overlap
ALSA: pcm - Reset invalid position even without debug option
...
Linus Torvalds [Thu, 26 Mar 2009 18:04:34 +0000 (11:04 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (29 commits)
crypto: sha512-s390 - Add missing block size
hwrng: timeriomem - Breaks an allyesconfig build on s390:
nlattr: Fix build error with NET off
crypto: testmgr - add zlib test
crypto: zlib - New zlib crypto module, using pcomp
crypto: testmgr - Add support for the pcomp interface
crypto: compress - Add pcomp interface
netlink: Move netlink attribute parsing support to lib
crypto: Fix dead links
hwrng: timeriomem - New driver
crypto: chainiv - Use kcrypto_wq instead of keventd_wq
crypto: cryptd - Per-CPU thread implementation based on kcrypto_wq
crypto: api - Use dedicated workqueue for crypto subsystem
crypto: testmgr - Test skciphers with no IVs
crypto: aead - Avoid infinite loop when nivaead fails selftest
crypto: skcipher - Avoid infinite loop when cipher fails selftest
crypto: api - Fix crypto_alloc_tfm/create_create_tfm return convention
crypto: api - crypto_alg_mod_lookup either tested or untested
crypto: amcc - Add crypt4xx driver
crypto: ansi_cprng - Add maintainer
...
Linus Torvalds [Thu, 26 Mar 2009 18:04:08 +0000 (11:04 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: (35 commits)
[CPUFREQ] Prevent p4-clockmod from auto-binding to the ondemand governor.
[CPUFREQ] Make cpufreq-nforce2 less obnoxious
[CPUFREQ] p4-clockmod reports wrong frequency.
[CPUFREQ] powernow-k8: Use a common exit path.
[CPUFREQ] Change link order of x86 cpufreq modules
[CPUFREQ] conservative: remove 10x from def_sampling_rate
[CPUFREQ] conservative: fixup governor to function more like ondemand logic
[CPUFREQ] conservative: fix dbs_cpufreq_notifier so freq is not locked
[CPUFREQ] conservative: amend author's email address
[CPUFREQ] Use swap() in longhaul.c
[CPUFREQ] checkpatch cleanups for acpi-cpufreq
[CPUFREQ] powernow-k8: Only print error message once, not per core.
[CPUFREQ] ondemand/conservative: sanitize sampling_rate restrictions
[CPUFREQ] ondemand/conservative: deprecate sampling_rate{min,max}
[CPUFREQ] powernow-k8: Always compile powernow-k8 driver with ACPI support
[CPUFREQ] Introduce /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_transition_latency
[CPUFREQ] checkpatch cleanups for powernow-k8
[CPUFREQ] checkpatch cleanups for ondemand governor.
[CPUFREQ] checkpatch cleanups for powernow-k7
[CPUFREQ] checkpatch cleanups for speedstep related drivers.
...
Linus Torvalds [Thu, 26 Mar 2009 18:03:39 +0000 (11:03 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (71 commits)
SELinux: inode_doinit_with_dentry drop no dentry printk
SELinux: new permission between tty audit and audit socket
SELinux: open perm for sock files
smack: fixes for unlabeled host support
keys: make procfiles per-user-namespace
keys: skip keys from another user namespace
keys: consider user namespace in key_permission
keys: distinguish per-uid keys in different namespaces
integrity: ima iint radix_tree_lookup locking fix
TOMOYO: Do not call tomoyo_realpath_init unless registered.
integrity: ima scatterlist bug fix
smack: fix lots of kernel-doc notation
TOMOYO: Don't create securityfs entries unless registered.
TOMOYO: Fix exception policy read failure.
SELinux: convert the avc cache hash list to an hlist
SELinux: code readability with avc_cache
SELinux: remove unused av.decided field
SELinux: more careful use of avd in avc_has_perm_noaudit
SELinux: remove the unused ae.used
SELinux: check seqno when updating an avc_node
...
Linus Torvalds [Thu, 26 Mar 2009 18:02:50 +0000 (11:02 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
MIPS: R2: Fix problem with code that incorrectly modifies ebase.
MIPS: Change {set,clear,change}_c0_<foo> to return old value.
MIPS: compat: Remove duplicated #include
MIPS: VR5500: Enable prefetch
MIPS: Fix oops in dma_unmap_page on not coherent mips platforms
Wu Fengguang [Mon, 23 Mar 2009 00:57:38 +0000 (08:57 +0800)]
writeback: double the dirty thresholds
Enlarge default dirty ratios from 5/10 to 10/20. This fixes [Bug
#12809] iozone regression with 2.6.29-rc6.
The iozone benchmarks are performed on a 1200M file, with 8GB ram.
iozone -i 0 -i 1 -i 2 -i 3 -i 4 -r 4k -s 64k -s 512m -s 1200m -b tmp.xls
iozone -B -r 4k -s 64k -s 512m -s 1200m -b tmp.xls
The performance regression is triggered by commit
1cf6e7d83bf3(mm: task
dirty accounting fix), which makes more correct/thorough dirty
accounting.
The default 5/10 dirty ratios were picked (a) with the old dirty logic
and (b) largely at random and (c) designed to be aggressive. In
particular, that (a) means that having fixed some of the dirty
accounting, maybe the real bug is now that it was always too aggressive,
just hidden by an accounting issue.
The enlarged 10/20 dirty ratios are just about enough to fix the regression.
[ We will have to look at how this affects the old fsync() latency issue,
but that probably will need independent work. - Linus ]
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: "Lin, Ming M" <ming.m.lin@intel.com>
Tested-by: "Lin, Ming M" <ming.m.lin@intel.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Garrett [Thu, 26 Mar 2009 17:53:14 +0000 (17:53 +0000)]
Make relatime default
Change the default behaviour of the kernel to use relatime for all
filesystems. This can be overridden with the "strictatime" mount
option.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Garrett [Thu, 26 Mar 2009 17:49:56 +0000 (17:49 +0000)]
Add a strictatime mount option
Add support for explicitly requesting full atime updates. This makes it
possible for kernels to default to relatime but still allow userspace to
override it.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Garrett [Thu, 26 Mar 2009 17:32:14 +0000 (17:32 +0000)]
Allow relatime to update atime once a day
Allow atime to be updated once per day even with relatime. This lets
utilities like tmpreaper (which delete files based on last access time)
continue working, making relatime a plausible default for distributions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Valerie Aurora Henson <vaurora@redhat.com>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Tue, 17 Mar 2009 08:38:40 +0000 (09:38 +0100)]
Get rid of pdflush_operation() in emergency sync and remount
Opencode a cheasy approach with kevent. The idea here is that we'll
add some generic delayed work infrastructure, which probably wont be
based on pdflush (or maybe it will, in which case we can just add it
back).
This is in preparation for getting rid of pdflush completely.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Tue, 17 Mar 2009 08:36:37 +0000 (09:36 +0100)]
btrfs: get rid of current_is_pdflush() in btrfs_btree_balance_dirty
Chris says it's safe to kill.
Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Jens Axboe [Tue, 17 Mar 2009 08:35:06 +0000 (09:35 +0100)]
Move the default_backing_dev_info out of readahead.c and into backing-dev.c
It really makes no sense to have it in readahead.c, so move it where
it belongs.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Avishay Traeger [Tue, 24 Mar 2009 11:40:18 +0000 (12:40 +0100)]
block: Repeated lines in switching-sched.txt
These lines appear in this file twice - removed one occurrence.
Signed-off-by: Avishay Traeger <avishay@il.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Boaz Harrosh [Tue, 24 Mar 2009 11:37:50 +0000 (12:37 +0100)]
bsg: Remove bogus check against request_queue->max_sectors
bsg submits REQ_TYPE_BLOCK_PC so the right check is max_hw_sectors.
But I've removed this check because right after, bsg proceeds with
calling blk_rq_map_user() which does all the right checks.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Boaz Harrosh [Tue, 24 Mar 2009 11:35:07 +0000 (12:35 +0100)]
block: WARN in __blk_put_request() for potential bio leak
Put a WARN_ON in __blk_put_request if it is about to
leak bio(s). This is a serious bug that can happen in error
handling code paths.
For this to work I have fixed a couple of places in block/ where
request->bio != NULL ownership was not honored. And a small cleanup
at sg_io() while at it.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Nikanth Karthikesan [Tue, 24 Mar 2009 11:33:41 +0000 (12:33 +0100)]
loop: fix circular locking in loop_clr_fd()
With CONFIG_PROVE_LOCKING enabled
$ losetup /dev/loop0 file
$ losetup -o 32256 /dev/loop1 /dev/loop0
$ losetup -d /dev/loop1
$ losetup -d /dev/loop0
triggers a [ INFO: possible circular locking dependency detected ]
I think this warning is a false positive.
Open/close on a loop device acquires bd_mutex of the device before
acquiring lo_ctl_mutex of the same device. For ioctl(LOOP_CLR_FD) after
acquiring lo_ctl_mutex, fput on the backing_file might acquire the bd_mutex of
a device, if backing file is a device and this is the last reference to the
file being dropped . But it is guaranteed that it is impossible to have a
circular list of backing devices.(say loop2->loop1->loop0->loop2 is not
possible), which guarantees that this can never deadlock.
So this warning should be suppressed. It is very difficult to annotate lockdep
not to warn here in the correct way. A simple way to silence lockdep could be
to mark the lo_ctl_mutex in ioctl to be a sub class, but this might mask some
other real bugs.
@@ -1164,7 +1164,7 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode,
struct loop_device *lo = bdev->bd_disk->private_data;
int err;
- mutex_lock(&lo->lo_ctl_mutex);
+ mutex_lock_nested(&lo->lo_ctl_mutex, 1);
switch (cmd) {
case LOOP_SET_FD:
err = loop_set_fd(lo, mode, bdev, arg);
Or actually marking the bd_mutex after lo_ctl_mutex as a sub class could be
a better solution.
Luckily it is easy to avoid calling fput on backing file with lo_ctl_mutex
held, so no lockdep annotation is required.
If you do not like the special handling of the lo_ctl_mutex just for the
LOOP_CLR_FD ioctl in lo_ioctl(), the mutex handling could be moved inside
each of the individual ioctl handlers and I could send you another patch.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
David S. Miller [Thu, 26 Mar 2009 08:54:46 +0000 (01:54 -0700)]
sparc64: Flush TLB before releasing pages.
tlb_flush_mmu() needs to flush pending TLB entries before
processing the mmu_gather ->pages list.
Noticed by Benjamin Herrenschmidt.
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 26 Mar 2009 08:22:01 +0000 (01:22 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6
PJ Waskiewicz [Wed, 25 Mar 2009 22:10:42 +0000 (22:10 +0000)]
ixgbe: Allow Priority Flow Control settings to survive a device reset
When changing DCB parameters, ixgbe needs to have the MAC reset. The way
the flow control code is setup today, PFC will be disabled on a reset.
This patch adds a new flow control type for PFC, and then has the netlink
layer take care of toggling which type of flow control to enable.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rami Rosen [Thu, 26 Mar 2009 08:11:48 +0000 (01:11 -0700)]
net: core: remove unneeded include in net/core/utils.c.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Wed, 25 Mar 2009 22:06:01 +0000 (22:06 +0000)]
e1000e: update version number
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Wed, 25 Mar 2009 22:05:41 +0000 (22:05 +0000)]
e1000e: fix close interrupt race
As noticed by Alan Cox, it is possible for e1000e to exit its interrupt
handler or NAPI with interrupts enabled even when the driver is unloading or
being configured administratively down.
fix related to fix for: http://bugzilla.kernel.org/show_bug.cgi?id=12876
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Wed, 25 Mar 2009 22:05:21 +0000 (22:05 +0000)]
e1000e: fix loss of multicast packets
e1000e (and e1000, igb, ixgbe, ixgb) all do a series of operations each
time a multicast address is added. The flow goes something like
1) stack adds one multicast address
2) stack passes whole current list of unicast and multicast addresses to
driver
3) driver clears entire list in hardware
4) driver programs each multicast address using iomem in a loop
This was causing multicast packets to be lost during the reprogramming
process.
reference with test program:
http://kerneltrap.org/mailarchive/linux-netdev/2009/3/14/
5160514/thread
Thanks to Dave Boutcher for his report and test program.
This driver fix prepares an array all at once in memory and programs it in
one shot to the hardware, not requiring an "erase" cycle. It would still
be possible for packets to be dropped while the receiver is off during
reprogramming.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Dave Boutcher <daveboutcher@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 25 Mar 2009 22:05:03 +0000 (22:05 +0000)]
e1000e: commonize tx cleanup routine to match e1000 & igb
This change updates the e1000e tx cleanup routine to more closely match
what already exists in igb and e1000.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Leblond [Thu, 26 Mar 2009 08:04:28 +0000 (01:04 -0700)]
netfilter: fix nf_logger name in ebt_ulog.
This patch renames the ebt_ulog nf_logger from "ulog" to "ebt_ulog" to
be in sync with other modules naming. As this name was currently only
used for informational purpose, the renaming should be harmless.
Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Leblond [Thu, 26 Mar 2009 08:04:02 +0000 (01:04 -0700)]
netfilter: fix warning in ebt_ulog init function.
The ebt_ulog module does not follow the fixed convention about function
return. Loading the module is triggering the following message:
sys_init_module: 'ebt_ulog'->init suspiciously returned 1, it should follow 0/-E convention
sys_init_module: loading module anyway...
Pid: 2334, comm: modprobe Not tainted
2.6.29-rc5edenwall0-00883-g199e57b #146
Call Trace:
[<
c0441b81>] ? printk+0xf/0x16
[<
c02311af>] sys_init_module+0x107/0x186
[<
c0202cfa>] syscall_call+0x7/0xb
The following patch fixes the return treatment in ebt_ulog_init()
function.
Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Leblond [Thu, 26 Mar 2009 08:03:23 +0000 (01:03 -0700)]
netfilter: fix warning about invalid const usage
This patch fixes the declaration of the logger structure in ebt_log
and ebt_ulog: I forgot to remove the const option from their declaration
in the commit
ca735b3aaa945626ba65a3e51145bfe4ecd9e222 ("netfilter:
use a linked list of loggers").
Pointed-out-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Wed, 25 Mar 2009 21:59:22 +0000 (21:59 +0000)]
e1000: fix close race with interrupt
this is in regards to
http://bugzilla.kernel.org/show_bug.cgi?id=12876
where it appears that e1000 can leave its interrupt enabled after
exiting the driver. Fix the bug by making the interrupt enable
paths more aware of the driver exiting.
Thanks to Alan Cox for the poke and initial investigation.
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 25 Mar 2009 21:59:04 +0000 (21:59 +0000)]
e1000: cleanup clean_tx_irq routine so that it completely cleans ring
The tx cleanup routine was stopping after 64 packets and this was causing
issues resulting in the ring not being completely cleaned.
This change updates the driver to clean the entire ring and if it doesn't
it then will retry on the next pass.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 25 Mar 2009 21:58:45 +0000 (21:58 +0000)]
e1000: fix tx hang detect logic and address dma mapping issues
This patch changes the dma mapping to better support
skb_dma_map/skb_dma_unmap and addresses and redefines the tx hang logic to
be based off of time stamp instead of if the dma field is populated
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Thu, 26 Mar 2009 04:01:47 +0000 (21:01 -0700)]
bridge: bad error handling when adding invalid ether address
This fixes an crash when empty bond device is added to a bridge.
If an interface with invalid ethernet address (all zero) is added
to a bridge, then bridge code detects it when setting up the forward
databas entry. But the error unwind is broken, the bridge port object
can get freed twice: once when ref count went to zeo, and once by kfree.
Since object is never really accessible, just free it.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 26 Mar 2009 00:23:38 +0000 (17:23 -0700)]
bonding: select current active slave when enslaving device for mode tlb and alb
I've hit an issue on my system when I've been using RealTek RTL8139D cards in
bonding interface in mode balancing-alb. When I enslave a card, the current
active slave (bond->curr_active_slave) is not set and the link is therefore
not functional.
----
# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
Bonding Mode: adaptive load balancing
Primary Slave: None
Currently Active Slave: None
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:1f:1f:01:2f:22
----
The thing that gets it right is when I unplug the cable and then I put it back
into the NIC. Then the current active slave is set to eth1 and link is working
just fine. Here is dmesg log with bonding DEBUG messages turned on:
----
ADDRCONF(NETDEV_UP): bond0: link is not ready
event_dev: bond0, event: 1
IFF_MASTER
event_dev: bond0, event: 8
IFF_MASTER
bond_ioctl: master=bond0, cmd=35216
slave_dev=
cac5d800:
slave_dev->name=eth1:
eth1: ! NETIF_F_VLAN_CHALLENGED
event_dev: eth1, event: 8
eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
event_dev: eth1, event: 1
event_dev: eth1, event: 8
IFF_SLAVE
Initial state of slave_dev is BOND_LINK_UP
bonding: bond0: enslaving eth1 as an active interface with an up link.
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
event_dev: bond0, event: 4
IFF_MASTER
bond0: no IPv6 routers present
<<<<cable unplug>>>>
eth1: link down
event_dev: eth1, event: 4
IFF_SLAVE
bonding: bond0: link status definitely down for interface eth1, disabling it
event_dev: bond0, event: 4
IFF_MASTER
<<<<cable plug>>>>
eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1
event_dev: eth1, event: 4
IFF_SLAVE
bonding: bond0: link status definitely up for interface eth1.
bonding: bond0: making interface eth1 the new active one.
event_dev: eth1, event: 8
IFF_SLAVE
event_dev: eth1, event: 8
IFF_SLAVE
bonding: bond0: first active interface up!
event_dev: bond0, event: 4
IFF_MASTER
----
The current active slave is set by calling bond_select_active_slave() function
from bond_miimon_commit() function when the slave (eth1) link goes to state up.
I also tested this on other machine with Broadcom NetXtreme II BCM5708
1000Base-T NIC and there all works fine. The thing is that this adapter is down
and goes up after few seconds after it is enslaved.
This patch calls bond_select_active_slave() in bond_enslave() function for modes
alb and tlb and makes sure that the current active slave is set up properly even
when the slave state is already up. Tested on both systems, works fine.
Notice: The same problem can maybe also occrur in mode 8023AD but I'm unable to
test that.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Li Yang [Tue, 24 Mar 2009 23:15:33 +0000 (23:15 +0000)]
gianfar: reallocate skb when headroom is not enough for fcb
Gianfar uses a hardware header FCB for offloading. However when used
with bridging or IP forwarding, TX skb might not have enough headroom
for the FCB. Reallocate skb for such cases.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 24 Mar 2009 23:34:38 +0000 (23:34 +0000)]
Bump release date to 25Mar2009 and version to 0.22
This patch bumps the driver release date to March 25th 2009
and release version to 0.22.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Tue, 24 Mar 2009 23:34:35 +0000 (23:34 +0000)]
r6040: Fix second PHY address
This patch fixes the second PHY address which is strapped
to be at PHY address 3 instead of 2.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wim Van Sebroeck [Mon, 23 Mar 2009 13:50:38 +0000 (13:50 +0000)]
[WATCHDOG] i6300esb.c: start locking
Change the start function in preparation of the generic watchdog code.
Also make sure that locking of the start function is OK.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Thu, 19 Mar 2009 19:02:44 +0000 (19:02 +0000)]
[WATCHDOG] i6300esb.c: convert to platform device driver
Convert the Intel 6300ESB watchdog timer to a platform device driver.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Alan Cox [Sun, 22 Mar 2009 10:46:42 +0000 (10:46 +0000)]
[WATCHDOG] wdt.c: remove #ifdef CONFIG_WDT_501
Change the wdt.c watchdog driver so that the code is the same for
both the WDT500 as the WDT501-P card. The selection of the card
is now being done via the module parameter: 'type' instead of the
config option CONFIG_WDT_501.
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Wed, 18 Mar 2009 09:09:26 +0000 (09:09 +0000)]
[WATCHDOG] Fix io.h & uaccess.h includes.
Fix following includes:
* #include <asm/io.h> should be #include <linux/io.h>
* #include <asm/uaccess.h> should be #include <linux/uaccess.h>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Wed, 18 Mar 2009 08:35:09 +0000 (08:35 +0000)]
[WATCHDOG] More coding-style and trivial clean-up
Some more cleaning-up of the watchdog drivers.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Wed, 18 Mar 2009 08:18:43 +0000 (08:18 +0000)]
[WATCHDOG] struct file_operations should be const
Fix following warnings:
WARNING: struct file_operations should normally be const
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Wed, 18 Mar 2009 08:05:24 +0000 (08:05 +0000)]
[WATCHDOG] cpwd.c: Coding style - Clean-up
This brings the cpwd.c watchdog driver in line with the kernel's coding style.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Thomas Mingarelli [Tue, 3 Mar 2009 00:17:16 +0000 (00:17 +0000)]
[WATCHDOG] hpwdt.c: Add new HP BMC controller.
Add the PCI-ID for the upcoming new BMC controller for HP hardware.
Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Julia Lawall [Mon, 29 Dec 2008 10:23:47 +0000 (11:23 +0100)]
[PATCH 13/13] drivers/watchdog: use USB API functions rather than constants
This set of patches introduces calls to the following set of functions:
usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)
In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:
USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC
An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)
@r5@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@inc@
@@
#include <linux/usb.h>
@depends on !inc && (r1||r5)@
@@
+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Thomas Reitmayr [Tue, 24 Feb 2009 22:59:22 +0000 (14:59 -0800)]
[WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform data
The orion5x-wdt driver is now registered as a platform device and
receives the tclk value as platform data. This fixes a compile issue
cause by a previously removed define "ORION5X_TCLK".
Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Kristof Provost <kristof@sigsegv.be>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Sylver Bruneau <sylver.bruneau@googlemail.com>
Cc: Kunihiko IMAI <bak@d2.dion.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Wim Van Sebroeck [Mon, 23 Feb 2009 13:08:37 +0000 (13:08 +0000)]
[WATCHDOG] rc32434_wdt: make sure watchdog is not running at startup
Make sure that the watchdog is not running after loading
and before it is started by opening /dev/watchdog.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Mon, 23 Feb 2009 13:08:36 +0000 (13:08 +0000)]
[WATCHDOG] rc32434_wdt: add spin_locking
Add spin_locks to prevent races.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Mon, 23 Feb 2009 13:08:35 +0000 (13:08 +0000)]
[WATCHDOG] rc32434_wdt: add shutdown method
Add shutdown method to the platform driver.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Phil Sutter [Sun, 8 Feb 2009 15:44:42 +0000 (16:44 +0100)]
[WATCHDOG] rc32434_wdt: add timeout module parameter
The WDT timer ticks quite fast (half of the CPU clock speed, which may
be between 198MHz and 330MHz (or 400MHz on newer boards)). Given it's
size of 32Bit, the maximum timeout value ranges from about 21s to 43s,
depending on the configured CPU clock speed.
This patch add's the timeout module parameter and checks that it's not
bigger then the maximum timeout for the given clock speed.
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Phil Sutter [Sun, 8 Feb 2009 15:44:42 +0000 (16:44 +0100)]
[WATCHDOG] rc32434_wdt: clean-up driver
Clean-up the rc32434 driver code:
- name the platform driver rc32434_wdt_driver
- Replace KBUILD_MODNAME ": " with PFX define.
- Cleanup include files
- Order the ioctl's
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Kevin Hilman [Thu, 29 Jan 2009 22:14:30 +0000 (14:14 -0800)]
[WATCHDOG] davinci: convert to ioremap() + io[read|write]
Remove davinci platform-specific IO accessor macros in favor
of standard ioremap + io[read|write]* functions.
Also, convert printk(KERN_ERR ....) into dev_err(...)
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Eric Lammerts [Tue, 3 Feb 2009 22:45:56 +0000 (17:45 -0500)]
[WATCHDOG] w83697ug: add error checking
I noticed the W83697UG driver tries to register a watchdog even though
it already noticed the chip isn't there.
WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising.
w83697ug/uf WDT: No W83697UG/UF could be found
w83697ug/uf WDT: Watchdog already running. Resetting timeout to 60 sec
w83697ug/uf WDT: cannot register miscdev on minor=130 (err=-16)
Patch propagates the error back to wdt_init().
Signed-off-by: Eric Lammerts <eric@lammerts.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Wim Van Sebroeck [Wed, 21 Jan 2009 11:13:11 +0000 (11:13 +0000)]
[WATCHDOG] cpwd.c & riowd.c - unlocked_ioctl
Switch to unlocked_ioctl
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Heiko Carstens [Tue, 24 Mar 2009 20:57:19 +0000 (20:57 +0000)]
qeth: fix wait_event_timeout handling
wait_event_timeout just takes the numnber of jiffies to wait as
an argument. That value does not include jiffies itself.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun [Tue, 24 Mar 2009 20:57:18 +0000 (20:57 +0000)]
qeth: check for completion of a running recovery
When a recovery is started for a qeth device, additional invocations
to change a mac address, to configure a VLAN interface on top, or to
add multicast addresses should wait till recovery is finished,
otherwise recovery might fail.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Klaus-Dieter Wacker [Tue, 24 Mar 2009 20:57:17 +0000 (20:57 +0000)]
qeth: unregister MAC addresses during recovery.
qeth: Unregister MAC addresses from device (layer 2) during
recovery cycle. When the device is set online the MAC
addresses are registered again on the device.
Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Blaschka [Tue, 24 Mar 2009 20:57:16 +0000 (20:57 +0000)]
qeth: remove EDDP
Performance measurements showed EDDP does not lower CPU costs but increase
them. So we dump out EDDP code from qeth driver.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Blaschka [Tue, 24 Mar 2009 20:57:15 +0000 (20:57 +0000)]
qeth: add statistics for tx csum
Add statistics counter for software tx checksumming.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kay Sievers [Tue, 24 Mar 2009 20:57:14 +0000 (20:57 +0000)]
qeth: struct device - replace bus_id with dev_name(), dev_set_name()
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 25 Mar 2009 07:03:16 +0000 (00:03 -0700)]
rndis_wlan: Fix build with netdev_ops compat disabled.
Instead of storing a private ->set_multicast_list, just
have a private netdev ops.
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Mack [Wed, 25 Mar 2009 06:32:03 +0000 (23:32 -0700)]
ax88796: Add method to take MAC from platform data
Implement a way to provide the MAC address for ax88796 devices from
their platform data. Boards might decide to set the address
programmatically, taken from boot tags or other sources.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Mack [Wed, 25 Mar 2009 06:31:22 +0000 (23:31 -0700)]
drivers/net/ax88796.c: take IRQ flags from platform_device
This patch adds support to the ax88796 ethernet driver to take IRQ flags
given by the platform_device definition.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bruce Allan [Wed, 25 Mar 2009 06:28:02 +0000 (23:28 -0700)]
e1000e: add support for 82574 device ID 0x10F6
Add device ID for a new variant of the 82574 adapter.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Acked-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roland Dreier [Wed, 25 Mar 2009 03:44:41 +0000 (20:44 -0700)]
Merge branches 'cxgb3', 'endian', 'ipath', 'ipoib', 'iser', 'mad', 'misc', 'mlx4', 'mthca', 'nes' and 'sysfs' into for-next
Steve Wise [Wed, 25 Mar 2009 03:44:18 +0000 (20:44 -0700)]
RDMA/cxgb3: Enforce required firmware
The cxgb3 NIC driver can handle more firmware versions than iw_cxgb3,
and since commit
8207befa ("cxgb3: untie strict FW matching") cxgb3
will load with firmware versions that iw_cxgb3 can't handle. The FW
major number indicates a specific interface between the FW and
iw_cxgb3. Thus if the major number of the running firmware does not
match the required version compiled into iw_cxgb3, then iw_cxgb3 must
not register that device.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Alan Cox [Tue, 24 Mar 2009 10:23:46 +0000 (10:23 +0000)]
[libata] Improve timeout handling
On a timeout call a device specific handler early in the recovery so that
we can complete and process successful commands which timed out due to IRQ
loss or the like rather more elegantly.
[Revised to exclude the timeout handling on a few devices that inherit from
SFF but are not SFF enough to use the default timeout handler]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Vlad Yasevich [Tue, 24 Mar 2009 16:24:51 +0000 (16:24 +0000)]
ipv6: Fix conflict resolutions during ipv6 binding
The ipv6 version of bind_conflict code calls ipv6_rcv_saddr_equal()
which at times wrongly identified intersections between addresses.
It particularly broke down under a few instances and caused erroneous
bind conflicts.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Tue, 24 Mar 2009 16:24:50 +0000 (16:24 +0000)]
ipv6: Make v4-mapped bindings consistent with IPv4
Binding to a v4-mapped address on an AF_INET6 socket should
produce the same result as binding to an IPv4 address on
AF_INET socket. The two are interchangable as v4-mapped
address is really a portability aid.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Tue, 24 Mar 2009 16:24:49 +0000 (16:24 +0000)]
ipv6: Allow ipv4 wildcard binds after ipv6 address binds
The IPv4 wildcard (0.0.0.0) address does not intersect
in any way with explicit IPv6 addresses. These two should
be permitted, but the IPv4 conflict code checks the ipv6only
bit as part of the test. Since binding to an explicit IPv6
address restricts the socket to only that IPv6 address, the
side-effect is that the socket behaves as v6-only. By
explicitely setting ipv6only in this case, allows the 2 binds
to succeed.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Yasevich [Tue, 24 Mar 2009 16:24:48 +0000 (16:24 +0000)]
ipv6: Disallow binding to v4-mapped address on v6-only socket.
A socket marked v6-only, can not receive or send traffic to v4-mapped
addresses. Thus allowing binding to v4-mapped address on such a
socket makes no sense.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alan Cox [Tue, 24 Mar 2009 10:23:19 +0000 (10:23 +0000)]
[libata] Drain data on errors
If the device is signalling that there is data to drain after an error we
should read the bytes out and throw them away. Without this some devices
and controllers get wedged and don't recover.
Based on earlier work by Mark Lord
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Alan Cox [Tue, 24 Mar 2009 10:22:25 +0000 (10:22 +0000)]
pata_sc1200: Activate secondary channel
Implement serialize and turn on slave channel
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Alan Cox [Tue, 24 Mar 2009 10:21:49 +0000 (10:21 +0000)]
pata_artop: Serializing support
Enable both ports on the 6210 and serialize them
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
David Milburn [Fri, 20 Mar 2009 19:14:23 +0000 (14:14 -0500)]
[libata] ahci: correct enclosure LED state save
ahci_transmit_led_message saves off the led_state
with a value that includes the port number OR'd
in, this incorrect value maybe reported back
in ahci_led_store.
For instance, if you turn off all the leds for
port 1 and cat the value back it will report 1
instead of 0.
# echo 0 > /sys/class/scsi_host/host1/em_message
# cat /sys/class/scsi_host/host1/em_message
1
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Mark Lord [Thu, 19 Mar 2009 17:32:21 +0000 (13:32 -0400)]
[libata] More robust parsing for IDENTIFY DEVICE multi_count field
Make libata more robust when parsing the multi_count
field from a drive's identify data. This prevents us from
attempting to use dubious multi_count values ad infinitum.
Reset dev->multi_count to zero and reprobe it each time
through this routine, as it can change on device reset.
Also ensure that the reported "maximum" value is valid
and is a power of two, and that the reported "count" value
is valid and also a power of two. And that the "count"
value is not greater than the "maximum" value.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Mark Lord [Sun, 15 Mar 2009 15:33:19 +0000 (11:33 -0400)]
sata_mv: fix LED blinking for SoC+NCQ
For Marvell SoC chips, the HDD LED does not blink when there is
disk I/O if NCQ is enabled. Add a quirk that enables blink mode for
the LED while NCQ is enabled on any port of a SoC host controller.
Normal LED function is restored when NCQ is not enabled on any port.
The code to enable the blink mode is based on earlier code
and suggestions from Frans Pop, Saeed Bishara, and possibly others.
Signed-off-by: Mark Lord <mlord@pobox.com>
Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Mark Lord [Wed, 11 Mar 2009 04:56:00 +0000 (00:56 -0400)]
sata_mv: optimize IRQ coalescing for 8-port chips
Enable use of the "all ports" IRQ coalescing optimization
for GEN_II / GEN_IIE chips that have dual host-controllers (8-ports).
Currently only the 6081 chip qualifies, but other chips may come along someday.
Rather than each half of the chip having to satisfy a local set of coalescing thresholds,
use of this feature groups all ports together under a single set of thresholds.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Mark Lord [Wed, 11 Mar 2009 02:01:17 +0000 (22:01 -0400)]
sata_mv: implement IRQ coalescing (v2)
Add IRQ coalescing to sata_mv (off by default).
This feature can reduce total interrupt overhead for RAID setups
in some situations, by deferring the interrupt signal until one or both of:
a) a specified io_count (completed SATA commands) is achieved, or
b) a specified time interval elapses after an IO completion.
For now, module parameters are used to set the irq_coalescing_io_count
and irq_coalescing_usecs (timeout) globally. These may eventually
be supplemented with sysfs attributes, so that thresholds can be set
on-the-fly and on a per-chip (or even per-host_controller) basis.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Mark Lord [Tue, 10 Mar 2009 22:51:04 +0000 (18:51 -0400)]
sata_mv: cosmetic preparations for IRQ coalescing
Various cosmetic changes in preparation for the IRQ coalescing feature.
Note that the various MV_IRQ_COAL_* definitions are restored/renamed
in the folloup patch which adds IRQ coalescing to the driver.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Florian Fainelli [Fri, 13 Mar 2009 14:41:43 +0000 (15:41 +0100)]
pata-rb532-cf: platform_get_irq() fix ignored failure
platform_get_irq() can return -ENXIO, but since 'irq' is an
unsigned int, it does not show when the IRQ resource wasn't found.
Make irq an int so that we can use a single variable to test the
platform_get_irq() return value.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Erik Inge Bolsø [Sat, 14 Mar 2009 22:08:20 +0000 (23:08 +0100)]
pata_efar: fix *dma_mask
According to Alan:
>and yes the EFAR does UDMA66.
mwdma:
>Yep - wrong comment. The EFAR is a sort of clone of the PIIX and I
>copied the comment while EFAR don't appear to have copied the
>limitation
Signed-off-by: Erik Inge Bolsø <knan-lkml@anduin.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Erik Inge Bolsø [Sat, 14 Mar 2009 22:07:33 +0000 (23:07 +0100)]
pata_radisys: fix mwdma_mask to exclude mwdma0
As noted by Alan:
>Your suspicions are correct here btw - the device can only do MWDMA1 and
>MWDMA2 (much like some PIIX devices)
Signed-off-by: Erik Inge Bolsø <knan-lkml@anduin.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Erik Inge Bolsø [Sat, 14 Mar 2009 20:38:24 +0000 (21:38 +0100)]
[libata] convert drivers to use ata.h mode mask defines
No functional changes in this patch.
Signed-off-by: Erik Inge Bolsø <knan-lkml@anduin.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log