John Fastabend [Thu, 19 Oct 2017 16:03:52 +0000 (09:03 -0700)]
bpf: devmap fix arithmetic overflow in bitmap_size calculation
An integer overflow is possible in dev_map_bitmap_size() when
calculating the BITS_TO_LONG logic which becomes, after macro
replacement,
(((n) + (d) - 1)/ (d))
where 'n' is a __u32 and 'd' is (8 * sizeof(long)). To avoid
overflow cast to u64 before arithmetic.
Reported-by: Richard Weinberger <richard@nod.at>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 21 Oct 2017 11:32:25 +0000 (12:32 +0100)]
Merge branch 'aquantia-fixes'
Igor Russkikh says:
====================
net: aquantia: Atlantic driver 10/2017 updates
This patchset fixes various issues in driver,
improves parameters for better performance on 10Gbit link
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 19 Oct 2017 15:23:59 +0000 (18:23 +0300)]
net: aquantia: Bad udp rate on default interrupt coalescing
Default Tx rates cause very long ISR delays on Tx.
0xff is 510us delay, giving only ~ 2000 interrupts per seconds for
Tx rings cleanup. With these settings udp tx rate was never higher than
~800Mbps on a single stream. Changing min delay to 0xF makes it
way better with ~6Gbps
TCP stream performance is almost unaffected by this change, since LSO
optimizations play important role.
CPU load is affected insignificantly by this change.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 19 Oct 2017 15:23:58 +0000 (18:23 +0300)]
net: aquantia: Enable coalescing management via ethtool interface
Aquantia NIC allows both TX and RX interrupt throttle rate (ITR)
management, but this was used in a very limited way via predefined
values. This patch allows to setup ITR default values via module
command line arguments and via standard ethtool coalescing settings.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 19 Oct 2017 15:23:57 +0000 (18:23 +0300)]
net: aquantia: mmio unmap was not performed on driver removal
That may lead to mmio resource leakage.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 19 Oct 2017 15:23:56 +0000 (18:23 +0300)]
net: aquantia: Limit number of MSIX irqs to the number of cpus
There is no much practical use from having MSIX vectors more that number
of cpus, thus cap this first with preconfigured limit, then with number
of cpus online.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 19 Oct 2017 15:23:55 +0000 (18:23 +0300)]
net: aquantia: Fixed transient link up/down/up notification
When doing ifconfig down/up, driver did not reported carrier_off neither
in nic_stop nor in nic_start. That caused link to be visible as "up"
during couple of seconds immediately after "ifconfig up".
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 19 Oct 2017 15:23:54 +0000 (18:23 +0300)]
net: aquantia: Add queue restarts stats counter
Queue stat strings are cleaned up, duplicate stat name strings removed,
queue restarts counter added
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 19 Oct 2017 15:23:53 +0000 (18:23 +0300)]
net: aquantia: Reset nic statistics on interface up/down
Internal statistics system on chip never gets reset until hardware
reboot. This is quite inconvenient in terms of ethtool statistics usage.
This patch implements incremental statistics update inside of
service callback.
Upon nic initialization, first request is done to fetch
initial stat data, current collected stat data gets cleared.
Internal statistics mailbox readout is improved to save space and
increase readability
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Thu, 19 Oct 2017 12:22:17 +0000 (14:22 +0200)]
udp: make some messages more descriptive
In the UDP code there are two leftover error messages with very few meaning.
Replace them with a more descriptive error message as some users
reported them as "strange network error".
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Thu, 19 Oct 2017 11:31:28 +0000 (13:31 +0200)]
geneve: Fix function matching VNI and tunnel ID on big-endian
On big-endian machines, functions converting between tunnel ID
and VNI use the three LSBs of tunnel ID storage to map VNI.
The comparison function eq_tun_id_and_vni(), on the other hand,
attempted to map the VNI from the three MSBs. Fix it by using
the same check implemented on LE, which maps VNI from the three
LSBs of tunnel ID.
Fixes:
2e0b26e10352 ("geneve: Optimize geneve device lookup.")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Jakub Sitnicki <jkbs@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 21 Oct 2017 01:30:31 +0000 (02:30 +0100)]
Merge tag 'linux-can-fixes-for-4.14-
20171019' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2017-10-19
this is a pull request of 11 patches for the upcoming 4.14 release.
There are 6 patches by ZHU Yi for the flexcan driver, that work around
the CAN error handling state transition problems found in various
incarnations of the flexcan IP core.
The patch by Colin Ian King fixes a potential NULL pointer deref in the
CAN broad cast manager (bcm). One patch by me replaces a direct deref of a RCU
protected pointer by rcu_access_pointer. My second patch adds missing
OOM error handling in af_can. A patch by Stefan Mätje for the esd_usb2
driver fixes the dlc in received RTR frames. And the last patch is by
Wolfgang Grandegger, it fixes a busy loop in the gs_usb driver in case
it runs out of TX contexts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dexuan Cui [Thu, 19 Oct 2017 03:33:14 +0000 (03:33 +0000)]
hv_sock: add locking in the open/close/release code paths
Without the patch, when hvs_open_connection() hasn't completely established
a connection (e.g. it has changed sk->sk_state to SS_CONNECTED, but hasn't
inserted the sock into the connected queue), vsock_stream_connect() may see
the sk_state change and return the connection to the userspace, and next
when the userspace closes the connection quickly, hvs_release() may not see
the connection in the connected queue; finally hvs_open_connection()
inserts the connection into the queue, but we won't be able to purge the
connection for ever.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Cathy Avery <cavery@redhat.com>
Cc: Rolf Neugebauer <rolf.neugebauer@docker.com>
Cc: Marcelo Cerri <marcelo.cerri@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gavin Shan [Thu, 19 Oct 2017 02:43:09 +0000 (13:43 +1100)]
net/ncsi: Fix length of GVI response packet
The length of GVI (GetVersionInfo) response packet should be 40 instead
of 36. This issue was found from /sys/kernel/debug/ncsi/eth0/stats.
# ethtool --ncsi eth0 swstats
:
RESPONSE OK TIMEOUT ERROR
=======================================
GVI 0 0 2
With this applied, no error reported on GVI response packets:
# ethtool --ncsi eth0 swstats
:
RESPONSE OK TIMEOUT ERROR
=======================================
GVI 2 0 0
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gavin Shan [Thu, 19 Oct 2017 02:43:08 +0000 (13:43 +1100)]
net/ncsi: Enforce failover on link monitor timeout
The NCSI channel has been configured to provide service if its link
monitor timer is enabled, regardless of its state (inactive or active).
So the timeout event on the link monitor indicates the out-of-service
on that channel, for which a failover is needed.
This sets NCSI_DEV_RESHUFFLE flag to enforce failover on link monitor
timeout, regardless the channel's original state (inactive or active).
Also, the link is put into "down" state to give the failing channel
lowest priority when selecting for the active channel. The state of
failing channel should be set to active in order for deinitialization
and failover to be done.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gavin Shan [Thu, 19 Oct 2017 02:43:07 +0000 (13:43 +1100)]
net/ncsi: Disable HWA mode when no channels are found
When there are no NCSI channels probed, HWA (Hardware Arbitration)
mode is enabled. It's not correct because HWA depends on the fact:
NCSI channels exist and all of them support HWA mode. This disables
HWA when no channels are probed.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Samuel Mendoza-Jonas [Thu, 19 Oct 2017 02:43:06 +0000 (13:43 +1100)]
net/ncsi: Stop monitor if channel times out or is inactive
ncsi_channel_monitor() misses stopping the channel monitor in several
places that it should, causing a WARN_ON_ONCE() to trigger when the
monitor is re-started later, eg:
[ 459.040000] WARNING: CPU: 0 PID: 1093 at net/ncsi/ncsi-manage.c:269 ncsi_start_channel_monitor+0x7c/0x90
[ 459.040000] CPU: 0 PID: 1093 Comm: kworker/0:3 Not tainted
4.10.17-gaca2fdd #140
[ 459.040000] Hardware name: ASpeed SoC
[ 459.040000] Workqueue: events ncsi_dev_work
[ 459.040000] [<
80010094>] (unwind_backtrace) from [<
8000d950>] (show_stack+0x20/0x24)
[ 459.040000] [<
8000d950>] (show_stack) from [<
801dbf70>] (dump_stack+0x20/0x28)
[ 459.040000] [<
801dbf70>] (dump_stack) from [<
80018d7c>] (__warn+0xe0/0x108)
[ 459.040000] [<
80018d7c>] (__warn) from [<
80018e70>] (warn_slowpath_null+0x30/0x38)
[ 459.040000] [<
80018e70>] (warn_slowpath_null) from [<
803f6a08>] (ncsi_start_channel_monitor+0x7c/0x90)
[ 459.040000] [<
803f6a08>] (ncsi_start_channel_monitor) from [<
803f7664>] (ncsi_configure_channel+0xdc/0x5fc)
[ 459.040000] [<
803f7664>] (ncsi_configure_channel) from [<
803f8160>] (ncsi_dev_work+0xac/0x474)
[ 459.040000] [<
803f8160>] (ncsi_dev_work) from [<
8002d244>] (process_one_work+0x1e0/0x450)
[ 459.040000] [<
8002d244>] (process_one_work) from [<
8002d510>] (worker_thread+0x5c/0x570)
[ 459.040000] [<
8002d510>] (worker_thread) from [<
80033614>] (kthread+0x124/0x164)
[ 459.040000] [<
80033614>] (kthread) from [<
8000a5e8>] (ret_from_fork+0x14/0x2c)
This also updates the monitor instead of just returning if
ncsi_xmit_cmd() fails to send the get-link-status command so that the
monitor properly times out.
Fixes:
e6f44ed6d04d3 "net/ncsi: Package and channel management"
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Samuel Mendoza-Jonas [Thu, 19 Oct 2017 02:43:05 +0000 (13:43 +1100)]
net/ncsi: Fix AEN HNCDSC packet length
Correct the value of the HNCDSC AEN packet.
Fixes:
7a82ecf4cfb85 "net/ncsi: NCSI AEN packet handler"
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 18 Oct 2017 23:14:52 +0000 (16:14 -0700)]
packet: avoid panic in packet_getsockopt()
syzkaller got crashes in packet_getsockopt() processing
PACKET_ROLLOVER_STATS command while another thread was managing
to change po->rollover
Using RCU will fix this bug. We might later add proper RCU annotations
for sparse sake.
In v2: I replaced kfree(rollover) in fanout_add() to kfree_rcu()
variant, as spotted by John.
Fixes:
a9b6391814d5 ("packet: rollover statistics")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: John Sperbeck <jsperbeck@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 20 Oct 2017 16:04:13 +0000 (09:04 -0700)]
tcp/dccp: fix ireq->opt races
syzkaller found another bug in DCCP/TCP stacks [1]
For the reasons explained in commit
ce1050089c96 ("tcp/dccp: fix
ireq->pktopts race"), we need to make sure we do not access
ireq->opt unless we own the request sock.
Note the opt field is renamed to ireq_opt to ease grep games.
[1]
BUG: KASAN: use-after-free in ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474
Read of size 1 at addr
ffff8801c951039c by task syz-executor5/3295
CPU: 1 PID: 3295 Comm: syz-executor5 Not tainted 4.14.0-rc4+ #80
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x25b/0x340 mm/kasan/report.c:409
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427
ip_queue_xmit+0x1687/0x18e0 net/ipv4/ip_output.c:474
tcp_transmit_skb+0x1ab7/0x3840 net/ipv4/tcp_output.c:1135
tcp_send_ack.part.37+0x3bb/0x650 net/ipv4/tcp_output.c:3587
tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3557
__tcp_ack_snd_check+0x2c6/0x4b0 net/ipv4/tcp_input.c:5072
tcp_ack_snd_check net/ipv4/tcp_input.c:5085 [inline]
tcp_rcv_state_process+0x2eff/0x4850 net/ipv4/tcp_input.c:6071
tcp_child_process+0x342/0x990 net/ipv4/tcp_minisocks.c:816
tcp_v4_rcv+0x1827/0x2f80 net/ipv4/tcp_ipv4.c:1682
ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:249 [inline]
ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:464 [inline]
ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:249 [inline]
ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476
__netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514
netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587
netif_receive_skb+0xae/0x390 net/core/dev.c:4611
tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372
tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766
tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792
call_write_iter include/linux/fs.h:1770 [inline]
new_sync_write fs/read_write.c:468 [inline]
__vfs_write+0x68a/0x970 fs/read_write.c:481
vfs_write+0x18f/0x510 fs/read_write.c:543
SYSC_write fs/read_write.c:588 [inline]
SyS_write+0xef/0x220 fs/read_write.c:580
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x40c341
RSP: 002b:
00007f469523ec10 EFLAGS:
00000293 ORIG_RAX:
0000000000000001
RAX:
ffffffffffffffda RBX:
0000000000718000 RCX:
000000000040c341
RDX:
0000000000000037 RSI:
0000000020004000 RDI:
0000000000000015
RBP:
0000000000000086 R08:
0000000000000000 R09:
0000000000000000
R10:
00000000000f4240 R11:
0000000000000293 R12:
00000000004b7fd1
R13:
00000000ffffffff R14:
0000000020000000 R15:
0000000000025000
Allocated by task 3295:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
__do_kmalloc mm/slab.c:3725 [inline]
__kmalloc+0x162/0x760 mm/slab.c:3734
kmalloc include/linux/slab.h:498 [inline]
tcp_v4_save_options include/net/tcp.h:1962 [inline]
tcp_v4_init_req+0x2d3/0x3e0 net/ipv4/tcp_ipv4.c:1271
tcp_conn_request+0xf6d/0x3410 net/ipv4/tcp_input.c:6283
tcp_v4_conn_request+0x157/0x210 net/ipv4/tcp_ipv4.c:1313
tcp_rcv_state_process+0x8ea/0x4850 net/ipv4/tcp_input.c:5857
tcp_v4_do_rcv+0x55c/0x7d0 net/ipv4/tcp_ipv4.c:1482
tcp_v4_rcv+0x2d10/0x2f80 net/ipv4/tcp_ipv4.c:1711
ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:249 [inline]
ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:464 [inline]
ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:249 [inline]
ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476
__netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514
netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587
netif_receive_skb+0xae/0x390 net/core/dev.c:4611
tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372
tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766
tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792
call_write_iter include/linux/fs.h:1770 [inline]
new_sync_write fs/read_write.c:468 [inline]
__vfs_write+0x68a/0x970 fs/read_write.c:481
vfs_write+0x18f/0x510 fs/read_write.c:543
SYSC_write fs/read_write.c:588 [inline]
SyS_write+0xef/0x220 fs/read_write.c:580
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed by task 3306:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
__cache_free mm/slab.c:3503 [inline]
kfree+0xca/0x250 mm/slab.c:3820
inet_sock_destruct+0x59d/0x950 net/ipv4/af_inet.c:157
__sk_destruct+0xfd/0x910 net/core/sock.c:1560
sk_destruct+0x47/0x80 net/core/sock.c:1595
__sk_free+0x57/0x230 net/core/sock.c:1603
sk_free+0x2a/0x40 net/core/sock.c:1614
sock_put include/net/sock.h:1652 [inline]
inet_csk_complete_hashdance+0xd5/0xf0 net/ipv4/inet_connection_sock.c:959
tcp_check_req+0xf4d/0x1620 net/ipv4/tcp_minisocks.c:765
tcp_v4_rcv+0x17f6/0x2f80 net/ipv4/tcp_ipv4.c:1675
ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:249 [inline]
ip_local_deliver+0x1ce/0x6e0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:464 [inline]
ip_rcv_finish+0x887/0x19a0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:249 [inline]
ip_rcv+0xc3f/0x1820 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x1a3e/0x34b0 net/core/dev.c:4476
__netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4514
netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4587
netif_receive_skb+0xae/0x390 net/core/dev.c:4611
tun_rx_batched.isra.50+0x5ed/0x860 drivers/net/tun.c:1372
tun_get_user+0x249c/0x36d0 drivers/net/tun.c:1766
tun_chr_write_iter+0xbf/0x160 drivers/net/tun.c:1792
call_write_iter include/linux/fs.h:1770 [inline]
new_sync_write fs/read_write.c:468 [inline]
__vfs_write+0x68a/0x970 fs/read_write.c:481
vfs_write+0x18f/0x510 fs/read_write.c:543
SYSC_write fs/read_write.c:588 [inline]
SyS_write+0xef/0x220 fs/read_write.c:580
entry_SYSCALL_64_fastpath+0x1f/0xbe
Fixes:
e994b2f0fb92 ("tcp: do not lock listener to process SYN packets")
Fixes:
079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 20 Oct 2017 12:01:30 +0000 (13:01 +0100)]
Merge branch 'sockmap-fixes'
John Fastabend says:
====================
sockmap fixes for net
The following implements a set of fixes for sockmap and changes the
API slightly in a few places to reduce preempt_disable/enable scope.
We do this here in net because it requires an API change and this
avoids getting stuck with legacy API going forward.
The short description:
Access to skb mark is removed, it is problematic when we add
features in the future because mark is a union and used by the
TCP/socket code internally. We don't want to expose this to the
BPF programs or let programs change the values.
The other change is caching metadata in the skb itself between
when the BPF program returns a redirect code and the core code
implements the redirect. This avoids having per cpu metadata.
Finally, tighten restriction on using sockmap to CAP_NET_ADMIN and
only SOCK_STREAM sockets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 18 Oct 2017 14:11:44 +0000 (07:11 -0700)]
bpf: require CAP_NET_ADMIN when using devmap
Devmap is used with XDP which requires CAP_NET_ADMIN so lets also
make CAP_NET_ADMIN required to use the map.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 18 Oct 2017 14:11:22 +0000 (07:11 -0700)]
bpf: require CAP_NET_ADMIN when using sockmap maps
Restrict sockmap to CAP_NET_ADMIN.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 18 Oct 2017 14:10:58 +0000 (07:10 -0700)]
bpf: remove mark access for SK_SKB program types
The skb->mark field is a union with reserved_tailroom which is used
in the TCP code paths from stream memory allocation. Allowing SK_SKB
programs to set this field creates a conflict with future code
optimizations, such as "gifting" the skb to the egress path instead
of creating a new skb and doing a memcpy.
Because we do not have a released version of SK_SKB yet lets just
remove it for now. A more appropriate scratch pad to use at the
socket layer is dev_scratch, but lets add that in future kernels
when needed.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 18 Oct 2017 14:10:36 +0000 (07:10 -0700)]
bpf: avoid preempt enable/disable in sockmap using tcp_skb_cb region
SK_SKB BPF programs are run from the socket/tcp context but early in
the stack before much of the TCP metadata is needed in tcp_skb_cb. So
we can use some unused fields to place BPF metadata needed for SK_SKB
programs when implementing the redirect function.
This allows us to drop the preempt disable logic. It does however
require an API change so sk_redirect_map() has been updated to
additionally provide ctx_ptr to skb. Note, we do however continue to
disable/enable preemption around actual BPF program running to account
for map updates.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Fastabend [Wed, 18 Oct 2017 14:10:15 +0000 (07:10 -0700)]
bpf: enforce TCP only support for sockmap
Only TCP sockets have been tested and at the moment the state change
callback only handles TCP sockets. This adds a check to ensure that
sockets actually being added are TCP sockets.
For net-next we can consider UDP support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 18 Oct 2017 13:37:49 +0000 (21:37 +0800)]
sctp: add the missing sock_owned_by_user check in sctp_icmp_redirect
Now sctp processes icmp redirect packet in sctp_icmp_redirect where
it calls sctp_transport_dst_check in which tp->dst can be released.
The problem is before calling sctp_transport_dst_check, it doesn't
check sock_owned_by_user, which means tp->dst could be freed while
a process is accessing it with owning the socket.
An use-after-free issue could be triggered by this.
This patch is to fix it by checking sock_owned_by_user before calling
sctp_transport_dst_check in sctp_icmp_redirect, so that it would not
release tp->dst if users still hold sock lock.
Besides, the same issue fixed in commit
45caeaa5ac0b ("dccp/tcp: fix
routing redirect race") on sctp also needs this check.
Fixes:
55be7a9c6074 ("ipv4: Add redirect support to all protocol icmp error handlers")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 17 Oct 2017 15:26:10 +0000 (23:26 +0800)]
sctp: do not peel off an assoc from one netns to another one
Now when peeling off an association to the sock in another netns, all
transports in this assoc are not to be rehashed and keep use the old
key in hashtable.
As a transport uses sk->net as the hash key to insert into hashtable,
it would miss removing these transports from hashtable due to the new
netns when closing the sock and all transports are being freeed, then
later an use-after-free issue could be caused when looking up an asoc
and dereferencing those transports.
This is a very old issue since very beginning, ChunYu found it with
syzkaller fuzz testing with this series:
socket$inet6_sctp()
bind$inet6()
sendto$inet6()
unshare(0x40000000)
getsockopt$inet_sctp6_SCTP_GET_ASSOC_ID_LIST()
getsockopt$inet_sctp6_SCTP_SOCKOPT_PEELOFF()
This patch is to block this call when peeling one assoc off from one
netns to another one, so that the netns of all transport would not
go out-sync with the key in hashtable.
Note that this patch didn't fix it by rehashing transports, as it's
difficult to handle the situation when the tuple is already in use
in the new netns. Besides, no one would like to peel off one assoc
to another netns, considering ipaddrs, ifaces, etc. are usually
different.
Reported-by: ChunYu Wang <chunwang@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 19 Oct 2017 12:14:03 +0000 (13:14 +0100)]
Merge branch 'bpf-Fix-for-BPF-devmap-percpu-allocation-splat'
Daniel Borkmann says:
====================
bpf: Fix for BPF devmap percpu allocation splat
The set fixes a splat in devmap percpu allocation when we alloc
the flush bitmap. Patch 1 is a prerequisite for the fix in patch 2,
patch 1 is rather small, so if this could be routed via -net, for
example, with Tejun's Ack that would be good. Patch 3 gets rid of
remaining PCPU_MIN_UNIT_SIZE checks, which are percpu allocator
internals and should not be used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 17 Oct 2017 14:55:54 +0000 (16:55 +0200)]
bpf: do not test for PCPU_MIN_UNIT_SIZE before percpu allocations
PCPU_MIN_UNIT_SIZE is an implementation detail of the percpu
allocator. Given we support __GFP_NOWARN now, lets just let
the allocation request fail naturally instead. The two call
sites from BPF mistakenly assumed __GFP_NOWARN would work, so
no changes needed to their actual __alloc_percpu_gfp() calls
which use the flag already.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 17 Oct 2017 14:55:53 +0000 (16:55 +0200)]
bpf: fix splat for illegal devmap percpu allocation
It was reported that syzkaller was able to trigger a splat on
devmap percpu allocation due to illegal/unsupported allocation
request size passed to __alloc_percpu():
[ 70.094249] illegal size (32776) or align (8) for percpu allocation
[ 70.094256] ------------[ cut here ]------------
[ 70.094259] WARNING: CPU: 3 PID: 3451 at mm/percpu.c:1365 pcpu_alloc+0x96/0x630
[...]
[ 70.094325] Call Trace:
[ 70.094328] __alloc_percpu_gfp+0x12/0x20
[ 70.094330] dev_map_alloc+0x134/0x1e0
[ 70.094331] SyS_bpf+0x9bc/0x1610
[ 70.094333] ? selinux_task_setrlimit+0x5a/0x60
[ 70.094334] ? security_task_setrlimit+0x43/0x60
[ 70.094336] entry_SYSCALL_64_fastpath+0x1a/0xa5
This was due to too large max_entries for the map such that we
surpassed the upper limit of PCPU_MIN_UNIT_SIZE. It's fine to
fail naturally here, so switch to __alloc_percpu_gfp() and pass
__GFP_NOWARN instead.
Fixes:
11393cc9b9be ("xdp: Add batching support to redirect map")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Shankara Pailoor <sp3485@columbia.edu>
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 17 Oct 2017 14:55:52 +0000 (16:55 +0200)]
mm, percpu: add support for __GFP_NOWARN flag
Add an option for pcpu_alloc() to support __GFP_NOWARN flag.
Currently, we always throw a warning when size or alignment
is unsupported (and also dump stack on failed allocation
requests). The warning itself is harmless since we return
NULL anyway for any failed request, which callers are
required to handle anyway. However, it becomes harmful when
panic_on_warn is set.
The rationale for the WARN() in pcpu_alloc() is that it can
be tracked when larger than supported allocation requests are
made such that allocations limits can be tweaked if warranted.
This makes sense for in-kernel users, however, there are users
of pcpu allocator where allocation size is derived from user
space requests, e.g. when creating BPF maps. In these cases,
the requests should fail gracefully without throwing a splat.
The current work-around was to check allocation size against
the upper limit of PCPU_MIN_UNIT_SIZE from call-sites for
bailing out prior to a call to pcpu_alloc() in order to
avoid throwing the WARN(). This is bad in multiple ways since
PCPU_MIN_UNIT_SIZE is an implementation detail, and having
the checks on call-sites only complicates the code for no
good reason. Thus, lets fix it generically by supporting the
__GFP_NOWARN flag that users can then use with calling the
__alloc_percpu_gfp() helper instead.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 19 Oct 2017 11:49:16 +0000 (12:49 +0100)]
Merge branch 'ena-fixes'
Netanel Belgazal says:
====================
ENA ethernet driver bug fixes
Some fixes for ENA ethernet driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Tue, 17 Oct 2017 07:33:05 +0000 (07:33 +0000)]
net: ena: fix wrong max Tx/Rx queues on ethtool
ethtool ena_get_channels() expose the max number of queues as the max
number of queues ENA supports (128 queues) and not the actual number
of created queues.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Tue, 17 Oct 2017 07:33:04 +0000 (07:33 +0000)]
net: ena: fix rare kernel crash when bar memory remap fails
This failure is rare and only found on testing where deliberately fail
devm_ioremap()
[ 451.170464] ena 0000:04:00.0: failed to remap regs bar
451.170549] Workqueue: pciehp-1 pciehp_power_thread
[ 451.170551] task:
ffff88085a5f2d00 task.stack:
ffffc9000756c000
[ 451.170552] RIP: 0010:devm_iounmap+0x2d/0x40
[ 451.170553] RSP: 0018:
ffffc9000756fac0 EFLAGS:
00010282
[ 451.170554] RAX:
00000000fffffffe RBX:
0000000000000000 RCX:
0000000000000000
[ 451.170555] RDX:
ffffffff813a7e00 RSI:
0000000000000282 RDI:
0000000000000282
[ 451.170556] RBP:
ffffc9000756fac8 R08:
00000000fffffffe R09:
00000000000009b7
[ 451.170557] R10:
0000000000000005 R11:
00000000000009b6 R12:
ffff880856c9d0a0
[ 451.170558] R13:
ffffc9000f5c90c0 R14:
ffff880856c9d0a0 R15:
0000000000000028
[ 451.170559] FS:
0000000000000000(0000) GS:
ffff88085f400000(0000)
knlGS:
0000000000000000
[ 451.170560] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 451.170561] CR2:
00007f169038b000 CR3:
0000000001c09000 CR4:
00000000003406f0
[ 451.170562] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 451.170562] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 451.170563] Call Trace:
[ 451.170572] ena_release_bars.isra.48+0x34/0x60 [ena]
[ 451.170574] ena_probe+0x144/0xd90 [ena]
[ 451.170579] ? ida_simple_get+0x98/0x100
[ 451.170585] ? kernfs_next_descendant_post+0x40/0x50
[ 451.170591] local_pci_probe+0x45/0xa0
[ 451.170592] pci_device_probe+0x157/0x180
[ 451.170599] driver_probe_device+0x2a8/0x460
[ 451.170600] __device_attach_driver+0x7e/0xe0
[ 451.170602] ? driver_allows_async_probing+0x30/0x30
[ 451.170603] bus_for_each_drv+0x68/0xb0
[ 451.170605] __device_attach+0xdd/0x160
[ 451.170607] device_attach+0x10/0x20
[ 451.170610] pci_bus_add_device+0x4f/0xa0
[ 451.170611] pci_bus_add_devices+0x39/0x70
[ 451.170613] pciehp_configure_device+0x96/0x120
[ 451.170614] pciehp_enable_slot+0x1b3/0x290
[ 451.170616] pciehp_power_thread+0x3b/0xb0
[ 451.170622] process_one_work+0x149/0x360
[ 451.170623] worker_thread+0x4d/0x3c0
[ 451.170626] kthread+0x109/0x140
[ 451.170627] ? rescuer_thread+0x380/0x380
[ 451.170628] ? kthread_park+0x60/0x60
[ 451.170632] ret_from_fork+0x25/0x30
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netanel Belgazal [Tue, 17 Oct 2017 07:33:03 +0000 (07:33 +0000)]
net: ena: reduce the severity of some printouts
Decrease log level of checksum errors as these messages can be
triggered remotely by bad packets.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfgang Grandegger [Thu, 14 Sep 2017 16:37:14 +0000 (18:37 +0200)]
can: gs_usb: fix busy loop if no more TX context is available
If sending messages with no cable connected, it quickly happens that
there is no more TX context available. Then "gs_can_start_xmit()"
returns with "NETDEV_TX_BUSY" and the upper layer does retry
immediately keeping the CPU busy. To fix that issue, I moved
"atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to
the TX done handling in "gs_usb_receive_bulk_callback()". Renaming
"active_tx_urbs" to "active_tx_contexts" and moving it into
"gs_[alloc|free]_tx_context()" would also make sense.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stefan Mätje [Wed, 18 Oct 2017 11:25:17 +0000 (13:25 +0200)]
can: esd_usb2: Fix can_dlc value for received RTR, frames
The dlc member of the struct rx_msg contains also the ESD_RTR flag to
mark received RTR frames. Without the fix the can_dlc value for received
RTR frames would always be set to 8 by get_can_dlc() instead of the
received value.
Fixes:
96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Sat, 29 Jul 2017 09:51:01 +0000 (11:51 +0200)]
can: af_can: can_pernet_init(): add missing error handling for kzalloc returning NULL
This patch adds the missing check and error handling for out-of-memory
situations, when kzalloc cannot allocate memory.
Fixes:
cb5635a36776 ("can: complete initial namespace support")
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Tue, 17 Oct 2017 05:18:35 +0000 (07:18 +0200)]
can: af_can: do not access proto_tab directly use rcu_access_pointer instead
"proto_tab" is a RCU protected array, when directly accessing the array,
sparse throws these warnings:
CHECK /srv/work/frogger/socketcan/linux/net/can/af_can.c
net/can/af_can.c:115:14: error: incompatible types in comparison expression (different address spaces)
net/can/af_can.c:795:17: error: incompatible types in comparison expression (different address spaces)
net/can/af_can.c:816:9: error: incompatible types in comparison expression (different address spaces)
This patch fixes the problem by using rcu_access_pointer() and
annotating "proto_tab" array as __rcu.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Colin Ian King [Fri, 8 Sep 2017 15:02:35 +0000 (16:02 +0100)]
can: bcm: check for null sk before deferencing it via the call to sock_net
The assignment of net via call sock_net will dereference sk. This
is performed before a sanity null check on sk, so there could be
a potential null dereference on the sock_net call if sk is null.
Fix this by assigning net after the sk null check. Also replace
the sk == NULL with the more usual !sk idiom.
Detected by CoverityScan CID#
1431862 ("Dereference before null check")
Fixes:
384317ef4187 ("can: network namespace support for CAN_BCM protocol")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ZHU Yi (ST-FIR/ENG1-Zhu) [Fri, 15 Sep 2017 07:09:37 +0000 (07:09 +0000)]
can: flexcan: fix p1010 state transition issue
Enable FLEXCAN_QUIRK_BROKEN_WERR_STATE and
FLEXCAN_QUIRK_BROKEN_PERR_STATE for p1010 to report correct state
transitions.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ZHU Yi (ST-FIR/ENG1-Zhu) [Fri, 15 Sep 2017 07:08:23 +0000 (07:08 +0000)]
can: flexcan: fix i.MX28 state transition issue
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for i.MX28 to report correct
state transitions, especially to error passive.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ZHU Yi (ST-FIR/ENG1-Zhu) [Fri, 15 Sep 2017 07:05:50 +0000 (07:05 +0000)]
can: flexcan: fix i.MX6 state transition issue
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for i.MX6 to report correct state
transitions.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ZHU Yi (ST-FIR/ENG1-Zhu) [Fri, 15 Sep 2017 07:03:58 +0000 (07:03 +0000)]
can: flexcan: implement error passive state quirk
Add FLEXCAN_QUIRK_BROKEN_PERR_STATE for better description of the
missing error passive interrupt quirk.
Error interrupt flooding may happen if the broken error state quirk fix
is enabled. For example, in case there is singled out node on the bus
and the node sends a frame, then error interrupt flooding happens and
will not stop because the node cannot go to bus off. The flooding will
stop after another node connected to the bus again.
If high bitrate configured on the low end system, then the flooding
may causes performance issue, hence, this patch mitigates this by:
1. disable error interrupt upon error passive state transition
2. re-enable error interrupt upon error warning state transition
3. disable/enable error interrupt upon error active state transition
depends on FLEXCAN_QUIRK_BROKEN_WERR_STATE
In this way, the driver is still able to report correct state
transitions without additional latency. When there are bus problems,
flooding of error interrupts is limited to the number of frames required
to change state from error warning to error passive if the core has
[TR]WRN_INT connected (FLEXCAN_QUIRK_BROKEN_WERR_STATE is not enabled),
otherwise, the flooding is limited to the number of frames required to
change state from error active to error passive.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ZHU Yi (ST-FIR/ENG1-Zhu) [Fri, 15 Sep 2017 07:01:23 +0000 (07:01 +0000)]
can: flexcan: rename legacy error state quirk
Rename FLEXCAN_QUIRK_BROKEN_ERR_STATE to FLEXCAN_QUIRK_BROKEN_WERR_STATE
for better description of the missing [TR]WRN_INT quirk.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ZHU Yi (ST-FIR/ENG1-Zhu) [Fri, 15 Sep 2017 06:59:15 +0000 (06:59 +0000)]
can: flexcan: fix state transition regression
Update state upon any interrupt to report correct state transitions in
case the flexcan core enabled the broken error state quirk fix.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.11
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jakub Kicinski [Mon, 16 Oct 2017 18:16:55 +0000 (11:16 -0700)]
bpf: disallow arithmetic operations on context pointer
Commit
f1174f77b50c ("bpf/verifier: rework value tracking")
removed the crafty selection of which pointer types are
allowed to be modified. This is OK for most pointer types
since adjust_ptr_min_max_vals() will catch operations on
immutable pointers. One exception is PTR_TO_CTX which is
now allowed to be offseted freely.
The intent of aforementioned commit was to allow context
access via modified registers. The offset passed to
->is_valid_access() verifier callback has been adjusted
by the value of the variable offset.
What is missing, however, is taking the variable offset
into account when the context register is used. Or in terms
of the code adding the offset to the value passed to the
->convert_ctx_access() callback. This leads to the following
eBPF user code:
r1 += 68
r0 = *(u32 *)(r1 + 8)
exit
being translated to this in kernel space:
0: (07) r1 += 68
1: (61) r0 = *(u32 *)(r1 +180)
2: (95) exit
Offset 8 is corresponding to 180 in the kernel, but offset
76 is valid too. Verifier will "accept" access to offset
68+8=76 but then "convert" access to offset 8 as 180.
Effective access to offset 248 is beyond the kernel context.
(This is a __sk_buff example on a debug-heavy kernel -
packet mark is 8 -> 180, 76 would be data.)
Dereferencing the modified context pointer is not as easy
as dereferencing other types, because we have to translate
the access to reading a field in kernel structures which is
usually at a different offset and often of a different size.
To allow modifying the pointer we would have to make sure
that given eBPF instruction will always access the same
field or the fields accessed are "compatible" in terms of
offset and size...
Disallow dereferencing modified context pointers and add
to selftests the test case described here.
Fixes:
f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Mon, 16 Oct 2017 15:09:53 +0000 (17:09 +0200)]
netlink: fix netlink_ack() extack race
It seems that it's possible to toggle NETLINK_F_EXT_ACK
through setsockopt() while another thread/CPU is building
a message inside netlink_ack(), which could then trigger
the WARN_ON()s I added since if it goes from being turned
off to being turned on between allocating and filling the
message, the skb could end up being too small.
Avoid this whole situation by storing the value of this
flag in a separate variable and using that throughout the
function instead.
Fixes:
2d4bc93368f5 ("netlink: extended ACK reporting")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Mon, 16 Oct 2017 15:02:11 +0000 (10:02 -0500)]
ibmvnic: Fix calculation of number of TX header descriptors
This patch correctly sets the number of additional header descriptors
that will be sent in an indirect SCRQ entry.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Mon, 16 Oct 2017 14:28:28 +0000 (16:28 +0200)]
mlxsw: core: Fix possible deadlock
When an EMAD is transmitted, a timeout work item is scheduled with a
delay of 200ms, so that another EMAD will be retried until a maximum of
five retries.
In certain situations, it's possible for the function waiting on the
EMAD to be associated with a work item that is queued on the same
workqueue (`mlxsw_core`) as the timeout work item. This results in
flushing a work item on the same workqueue.
According to commit
e159489baa71 ("workqueue: relax lockdep annotation
on flush_work()") the above may lead to a deadlock in case the workqueue
has only one worker active or if the system in under memory pressure and
the rescue worker is in use. The latter explains the very rare and
random nature of the lockdep splats we have been seeing:
[ 52.730240] ============================================
[ 52.736179] WARNING: possible recursive locking detected
[ 52.742119] 4.14.0-rc3jiri+ #4 Not tainted
[ 52.746697] --------------------------------------------
[ 52.752635] kworker/1:3/599 is trying to acquire lock:
[ 52.758378] (mlxsw_core_driver_name){+.+.}, at: [<
ffffffff811c4fa4>] flush_work+0x3a4/0x5e0
[ 52.767837]
but task is already holding lock:
[ 52.774360] (mlxsw_core_driver_name){+.+.}, at: [<
ffffffff811c65c4>] process_one_work+0x7d4/0x12f0
[ 52.784495]
other info that might help us debug this:
[ 52.791794] Possible unsafe locking scenario:
[ 52.798413] CPU0
[ 52.801144] ----
[ 52.803875] lock(mlxsw_core_driver_name);
[ 52.808556] lock(mlxsw_core_driver_name);
[ 52.813236]
*** DEADLOCK ***
[ 52.819857] May be due to missing lock nesting notation
[ 52.827450] 3 locks held by kworker/1:3/599:
[ 52.832221] #0: (mlxsw_core_driver_name){+.+.}, at: [<
ffffffff811c65c4>] process_one_work+0x7d4/0x12f0
[ 52.842846] #1: ((&(&bridge->fdb_notify.dw)->work)){+.+.}, at: [<
ffffffff811c65c4>] process_one_work+0x7d4/0x12f0
[ 52.854537] #2: (rtnl_mutex){+.+.}, at: [<
ffffffff822ad8e7>] rtnl_lock+0x17/0x20
[ 52.863021]
stack backtrace:
[ 52.867890] CPU: 1 PID: 599 Comm: kworker/1:3 Not tainted 4.14.0-rc3jiri+ #4
[ 52.875773] Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016
[ 52.886267] Workqueue: mlxsw_core mlxsw_sp_fdb_notify_work [mlxsw_spectrum]
[ 52.894060] Call Trace:
[ 52.909122] __lock_acquire+0xf6f/0x2a10
[ 53.025412] lock_acquire+0x158/0x440
[ 53.047557] flush_work+0x3c4/0x5e0
[ 53.087571] __cancel_work_timer+0x3ca/0x5e0
[ 53.177051] cancel_delayed_work_sync+0x13/0x20
[ 53.182142] mlxsw_reg_trans_bulk_wait+0x12d/0x7a0 [mlxsw_core]
[ 53.194571] mlxsw_core_reg_access+0x586/0x990 [mlxsw_core]
[ 53.225365] mlxsw_reg_query+0x10/0x20 [mlxsw_core]
[ 53.230882] mlxsw_sp_fdb_notify_work+0x2a3/0x9d0 [mlxsw_spectrum]
[ 53.237801] process_one_work+0x8f1/0x12f0
[ 53.321804] worker_thread+0x1fd/0x10c0
[ 53.435158] kthread+0x28e/0x370
[ 53.448703] ret_from_fork+0x2a/0x40
[ 53.453017] mlxsw_spectrum 0000:01:00.0: EMAD retries (2/5) (tid=
bf4549b100000774)
[ 53.453119] mlxsw_spectrum 0000:01:00.0: EMAD retries (5/5) (tid=
bf4549b100000770)
[ 53.453132] mlxsw_spectrum 0000:01:00.0: EMAD reg access failed (tid=
bf4549b100000770,reg_id=200b(sfn),type=query,status=0(operation performed))
[ 53.453143] mlxsw_spectrum 0000:01:00.0: Failed to get FDB notifications
Fix this by creating another workqueue for EMAD timeouts, thereby
preventing the situation of a work item trying to flush a work item
queued on the same workqueue.
Fixes:
caf7297e7ab5f ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Oct 2017 20:27:16 +0000 (21:27 +0100)]
Merge tag 'mac80211-for-davem-2017-10-16' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a single fix, for a WoWLAN-related part of CVE-2017-13080.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 16 Oct 2017 11:43:15 +0000 (19:43 +0800)]
dev_ioctl: add missing NETDEV_CHANGE_TX_QUEUE_LEN event notification
When changing dev tx_queue_len via netlink or net-sysfs,
a NETDEV_CHANGE_TX_QUEUE_LEN event notification will be
called.
But dev_ioctl missed this event notification, which could
cause no userspace notification would be sent.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz [Mon, 16 Oct 2017 09:19:48 +0000 (12:19 +0300)]
net/sched: cls_flower: Set egress_dev mark when calling into the HW driver
Commit
7091d8c '(net/sched: cls_flower: Add offload support using egress
Hardware device') made sure (when fl_hw_replace_filter is called) to put
the egress_dev mark on persisent structure instance. Hence, following calls
into the HW driver for stats and deletion will note it and act accordingly.
With commit
de4784ca030f this property is lost and hence when called,
the HW driver failes to operate (stats, delete) on the offloaded flow.
Fix it by setting the egress_dev flag whenever the ingress device is
different from the hw device since this is exactly the condition under
which we're calling into the HW driver through the egress port net-device.
Fixes:
de4784ca030f ('net: sched: get rid of struct tc_to_netdev')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roi Dayan <roid@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Fri, 13 Oct 2017 18:58:53 +0000 (11:58 -0700)]
tun: call dev_get_valid_name() before register_netdevice()
register_netdevice() could fail early when we have an invalid
dev name, in which case ->ndo_uninit() is not called. For tun
device, this is a problem because a timer etc. are already
initialized and it expects ->ndo_uninit() to clean them up.
We could move these initializations into a ->ndo_init() so
that register_netdevice() knows better, however this is still
complicated due to the logic in tun_detach().
Therefore, I choose to just call dev_get_valid_name() before
register_netdevice(), which is quicker and much easier to audit.
And for this specific case, it is already enough.
Fixes:
96442e42429e ("tuntap: choose the txq based on rxq")
Reported-by: Dmitry Alexeev <avekceeb@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Wed, 11 Oct 2017 14:24:48 +0000 (16:24 +0200)]
net: enable interface alias removal via rtnl
IFLA_IFALIAS is defined as NLA_STRING. It means that the minimal length of
the attribute is 1 ("\0"). However, to remove an alias, the attribute
length must be 0 (see dev_set_alias()).
Let's define the type to NLA_BINARY to allow 0-length string, so that the
alias can be removed.
Example:
$ ip l s dummy0 alias foo
$ ip l l dev dummy0
5: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:20:30:4f:a7:f3 brd ff:ff:ff:ff:ff:ff
alias foo
Before the patch:
$ ip l s dummy0 alias ""
RTNETLINK answers: Numerical result out of range
After the patch:
$ ip l s dummy0 alias ""
$ ip l l dev dummy0
5: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:20:30:4f:a7:f3 brd ff:ff:ff:ff:ff:ff
CC: Oliver Hartkopp <oliver@hartkopp.net>
CC: Stephen Hemminger <stephen@networkplumber.org>
Fixes:
96ca4a2cc145 ("net: remove ifalias on empty given alias")
Reported-by: Julien FLoret <julien.floret@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 16 Oct 2017 19:48:45 +0000 (20:48 +0100)]
Merge branch 'rtnetlink-dev-notification-fixes'
Xin Long says:
====================
rtnetlink: a bunch of fixes for userspace notifications in changing dev properties
Whenever any property of a link, address, route, etc. changes by whatever way,
kernel should notify the programs that listen for such events in userspace.
The patchet "rtnetlink: Cleanup user notifications for netdev events" tried to
fix a redundant notifications issue, but it also introduced a side effect.
After that, user notifications could only be sent when changing dev properties
via netlink api. As it removed some events process in rtnetlink_event where
the notifications was sent to users.
It resulted in no notification generated when dev properties are changed via
other ways, like ioctl, sysfs, etc. It may cause some user programs doesn't
work as expected because of the missing notifications.
This patchset will fix it by bringing some of these netdev events back and
also fix the old redundant notifications issue with a proper way.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 15 Oct 2017 10:13:46 +0000 (18:13 +0800)]
rtnetlink: do not set notification for tx_queue_len in do_setlink
NETDEV_CHANGE_TX_QUEUE_LEN event process in rtnetlink_event would
send a notification for userspace and tx_queue_len's setting in
do_setlink would trigger NETDEV_CHANGE_TX_QUEUE_LEN.
So it shouldn't set DO_SETLINK_NOTIFY status for this change to
send a notification any more.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 15 Oct 2017 10:13:45 +0000 (18:13 +0800)]
rtnetlink: check DO_SETLINK_NOTIFY correctly in do_setlink
The check 'status & DO_SETLINK_NOTIFY' in do_setlink doesn't really
work after status & DO_SETLINK_MODIFIED, as:
DO_SETLINK_MODIFIED 0x1
DO_SETLINK_NOTIFY 0x3
Considering that notifications are suppposed to be sent only when
status have the flag DO_SETLINK_NOTIFY, the right check would be:
(status & DO_SETLINK_NOTIFY) == DO_SETLINK_NOTIFY
This would avoid lots of duplicated notifications when setting some
properties of a link.
Fixes:
ba9989069f4e ("rtnl/do_setlink(): notify when a netdev is modified")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 15 Oct 2017 10:13:44 +0000 (18:13 +0800)]
rtnetlink: bring NETDEV_CHANGEUPPER event process back in rtnetlink_event
libteam needs this event notification in userspace when dev's master
dev has been changed. After this, the redundant notifications issue
would be fixed in the later patch 'rtnetlink: check DO_SETLINK_NOTIFY
correctly in do_setlink'.
Fixes:
b6b36eb23a46 ("rtnetlink: Do not generate notifications for NETDEV_CHANGEUPPER event")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 15 Oct 2017 10:13:43 +0000 (18:13 +0800)]
rtnetlink: bring NETDEV_POST_TYPE_CHANGE event process back in rtnetlink_event
As I said in patch 'rtnetlink: bring NETDEV_CHANGEMTU event process back
in rtnetlink_event', removing NETDEV_POST_TYPE_CHANGE event was not the
right fix for the redundant notifications issue.
So bring this event process back to rtnetlink_event and the old redundant
notifications issue would be fixed in the later patch 'rtnetlink: check
DO_SETLINK_NOTIFY correctly in do_setlink'.
Fixes:
aef091ae58aa ("rtnetlink: Do not generate notifications for POST_TYPE_CHANGE event")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 15 Oct 2017 10:13:42 +0000 (18:13 +0800)]
rtnetlink: bring NETDEV_CHANGE_TX_QUEUE_LEN event process back in rtnetlink_event
The same fix for changing mtu in the patch 'rtnetlink: bring
NETDEV_CHANGEMTU event process back in rtnetlink_event' is
needed for changing tx_queue_len.
Note that the redundant notifications issue for tx_queue_len
will be fixed in the later patch 'rtnetlink: do not send
notification for tx_queue_len in do_setlink'.
Fixes:
27b3b551d8a7 ("rtnetlink: Do not generate notifications for NETDEV_CHANGE_TX_QUEUE_LEN event")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 15 Oct 2017 10:13:41 +0000 (18:13 +0800)]
rtnetlink: bring NETDEV_CHANGEMTU event process back in rtnetlink_event
Commit
085e1a65f04f ("rtnetlink: Do not generate notifications for MTU
events") tried to fix the redundant notifications issue when ip link
set mtu by removing NETDEV_CHANGEMTU event process in rtnetlink_event.
But it also resulted in no notification generated when dev's mtu is
changed via other methods, like:
'ifconfig eth1 mtu 1400' or 'echo 1400 > /sys/class/net/eth1/mtu'
It would cause users not to be notified by this change.
This patch is to fix it by bringing NETDEV_CHANGEMTU event back into
rtnetlink_event, and the redundant notifications issue will be fixed
in the later patch 'rtnetlink: check DO_SETLINK_NOTIFY correctly in
do_setlink'.
Fixes:
085e1a65f04f ("rtnetlink: Do not generate notifications for MTU events")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Tue, 5 Sep 2017 12:54:54 +0000 (14:54 +0200)]
mac80211: accept key reinstall without changing anything
When a key is reinstalled we can reset the replay counters
etc. which can lead to nonce reuse and/or replay detection
being impossible, breaking security properties, as described
in the "KRACK attacks".
In particular, CVE-2017-13080 applies to GTK rekeying that
happened in firmware while the host is in D3, with the second
part of the attack being done after the host wakes up. In
this case, the wpa_supplicant mitigation isn't sufficient
since wpa_supplicant doesn't know the GTK material.
In case this happens, simply silently accept the new key
coming from userspace but don't take any action on it since
it's the same key; this keeps the PN replay counters intact.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
David S. Miller [Sun, 15 Oct 2017 01:51:52 +0000 (18:51 -0700)]
Merge branch 'bnxt_en-fixes'
Michael Chan says:
====================
bnxt_en: bug fixes.
Various bug fixes for the VF/PF link change logic, VF resource checking,
potential firmware response corruption on NVRAM and DCB parameters,
and reading the wrong register for PCIe link speed on the VF.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sankar Patchineelam [Sat, 14 Oct 2017 01:09:34 +0000 (21:09 -0400)]
bnxt_en: Fix possible corruption in DCB parameters from firmware.
hwrm_send_message() is replaced with _hwrm_send_message(), and
hwrm_cmd_lock mutex lock is grabbed for the whole period of
firmware call until the firmware DCB parameters have been copied.
This will prevent possible corruption of the firmware data.
Fixes:
7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.")
Signed-off-by: Sankar Patchineelam <sankar.patchineelam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 14 Oct 2017 01:09:33 +0000 (21:09 -0400)]
bnxt_en: Fix possible corrupted NVRAM parameters from firmware response.
In bnxt_find_nvram_item(), it is copying firmware response data after
releasing the mutex. This can cause the firmware response data
to be corrupted if the next firmware response overwrites the response
buffer. The rare problem shows up when running ethtool -i repeatedly.
Fix it by calling the new variant _hwrm_send_message_silent() that requires
the caller to take the mutex and to release it after the response data has
been copied.
Fixes:
3ebf6f0a09a2 ("bnxt_en: Add installed-package version reporting via Ethtool GDRVINFO")
Reported-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 14 Oct 2017 01:09:32 +0000 (21:09 -0400)]
bnxt_en: Fix VF resource checking.
In bnxt_sriov_enable(), we calculate to see if we have enough hardware
resources to enable the requested number of VFs. The logic to check
for minimum completion rings and statistics contexts is missing. Add
the required checks so that VF configuration won't fail.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vasundhara Volam [Sat, 14 Oct 2017 01:09:31 +0000 (21:09 -0400)]
bnxt_en: Fix VF PCIe link speed and width logic.
PCIE PCIE_EP_REG_LINK_STATUS_CONTROL register is only defined in PF
config space, so we must read it from the PF.
Fixes:
90c4f788f6c0 ("bnxt_en: Report PCIe link speed and width during driver load")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 14 Oct 2017 01:09:30 +0000 (21:09 -0400)]
bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.
As a further improvement to the PF/VF link change logic, use a private
mutex instead of the rtnl lock to protect link change logic. With the
new mutex, we don't have to take the rtnl lock in the workqueue when
we have to handle link related functions. If the VF and PF drivers
are running on the same host and both take the rtnl lock and one is
waiting for the other, it will cause timeout. This patch fixes these
timeouts.
Fixes:
90c694bb7181 ("bnxt_en: Fix RTNL lock usage on bnxt_update_link().")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 14 Oct 2017 01:09:29 +0000 (21:09 -0400)]
bnxt_en: Improve VF/PF link change logic.
Link status query firmware messages originating from the VFs are forwarded
to the PF. The driver handles these interactions in a workqueue for the
VF and PF. The VF driver waits for the response from the PF in the
workqueue. If the PF and VF driver are running on the same host and the
work for both PF and VF are queued on the same workqueue, the VF driver
may not get the response if the PF work item is queued behind it on the
same workqueue. This will lead to the VF link query message timing out.
To prevent this, we create a private workqueue for PFs instead of using
the common workqueue. The VF query and PF response will never be on
the same workqueue.
Fixes:
c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 13 Oct 2017 17:39:22 +0000 (13:39 -0400)]
net: dsa: mv88e6060: fix switch MAC address
The
88E6060 Ethernet switch always transmits the multicast bit of the
switch MAC address as a zero. It re-uses the corresponding bit 8 of the
register "Switch MAC Address Register Bytes 0 & 1" for "DiffAddr".
If the "DiffAddr" bit is 0, then all ports transmit the same source
address. If it is set to 1, then bit 2:0 are used for the port number.
The mv88e6060 driver is currently wrongly shifting the MAC address byte
0 by 9. To fix this, shift it by 8 as usual and clear its bit 0.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 13 Oct 2017 17:22:35 +0000 (19:22 +0200)]
l2tp: check ps->sock before running pppol2tp_session_ioctl()
When pppol2tp_session_ioctl() is called by pppol2tp_tunnel_ioctl(),
the session may be unconnected. That is, it was created by
pppol2tp_session_create() and hasn't been connected with
pppol2tp_connect(). In this case, ps->sock is NULL, so we need to check
for this case in order to avoid dereferencing a NULL pointer.
Fixes:
309795f4bec2 ("l2tp: Add netlink control API for L2TP")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wenhua Shi [Sat, 14 Oct 2017 16:51:36 +0000 (18:51 +0200)]
net: fix typo in skbuff.c
Signed-off-by: David S. Miller <davem@davemloft.net>
Emiliano Ingrassia [Thu, 12 Oct 2017 09:00:47 +0000 (11:00 +0200)]
net: stmmac: dwmac_lib: fix interchanged sleep/timeout values in DMA reset function
The DMA reset timeout, used in read_poll_timeout, is
ten times shorter than the sleep time.
This patch fixes these values interchanging them, as it was
before the read_poll_timeout introduction.
Fixes:
8a70aeca80c2 ("net: stmmac: Use readl_poll_timeout")
Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Thu, 12 Oct 2017 09:48:31 +0000 (11:48 +0200)]
liquidio: fix timespec64_to_ns typo
While experimenting with changes to the timekeeping code, I
ran into a build error in the liquidio driver:
drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'liquidio_ptp_settime':
drivers/net/ethernet/cavium/liquidio/lio_main.c:1850:22: error: passing argument 1 of 'timespec_to_ns' from incompatible pointer type [-Werror=incompatible-pointer-types]
The driver had a type mismatch since it was first merged, but
this never caused problems because it is only built on 64-bit
architectures that define timespec and timespec64 to the same
type.
If we ever want to compile-test the driver on 32-bit or change
the way that 64-bit timespec64 is defined, we need to fix it,
so let's just do it now.
Fixes:
f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 13 Oct 2017 15:42:53 +0000 (08:42 -0700)]
Merge tag 'wireless-drivers-for-davem-2017-10-13' of git://git./linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.14
Nothing really special standing out, all of these are important fixes
which should go to 4.14.
iwlwifi
* fix support for 3168 device series
* fix a potential crash when using FW debugging recording;
* improve channel flags parsing to avoid warnings on too long traces
* return -ENODATA when the temperature is not available, since the
-EIO we were returning was causing fatal errors in userspace
* avoid printing too many messages in dmesg when using monitor mode,
since this can become very noisy and completely flood the logs
brcmsmac
* reduce stack usage to avoid frame size warnings with KASAN
brcmfmac
* add a check to avoid copying uninitialised memory
rtlwifi:
* fix a regression with rtl8821ae starting from v4.11 where
connections was frequently lost
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Thu, 12 Oct 2017 03:10:31 +0000 (20:10 -0700)]
ip: update policy routing config help
The kernel config help for policy routing was still pointing at
an ancient document from 2000 that refers to Linux 2.1. Update it
to point to something that is at least occasionally updated.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Samuel Mendoza-Jonas [Wed, 11 Oct 2017 05:54:27 +0000 (16:54 +1100)]
net/ncsi: Don't limit vids based on hot_channel
Currently we drop any new VLAN ids if there are more than the current
(or last used) channel can support. Most importantly this is a problem
if no channel has been selected yet, resulting in a segfault.
Secondly this does not necessarily reflect the capabilities of any other
channels. Instead only drop a new VLAN id if we are already tracking the
maximum allowed by the NCSI specification. Per-channel limits are
already handled by ncsi_add_filter(), but add a message to set_one_vid()
to make it obvious that the channel can not support any more VLAN ids.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Drake [Wed, 11 Oct 2017 04:56:52 +0000 (12:56 +0800)]
r8169: only enable PCI wakeups when WOL is active
rtl_init_one() currently enables PCI wakeups if the ethernet device
is found to be WOL-capable. There is no need to do this when
rtl8169_set_wol() will correctly enable or disable the same wakeup flag
when WOL is activated/deactivated.
This works around an ACPI DSDT bug which prevents the Acer laptop models
Aspire ES1-533, Aspire ES1-732, PackardBell ENTE69AP and Gateway NE533
from entering S3 suspend - even when no ethernet cable is connected.
On these platforms, the DSDT says that GPE08 is a wakeup source for
ethernet, but this GPE fires as soon as the system goes into suspend,
waking the system up immediately. Having the wakeup normally disabled
avoids this issue in the default case.
With this change, WOL will continue to be unusable on these platforms
(it will instantly wake up if WOL is later enabled by the user) but we
do not expect this to be a commonly used feature on these consumer
laptops. We have separately determined that WOL works fine without any
ACPI GPEs enabled during sleep, so a DSDT fix or override would be
possible to make WOL work.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Tue, 10 Oct 2017 15:07:12 +0000 (17:07 +0200)]
macsec: fix memory leaks when skb_to_sgvec fails
Fixes:
cda7ea690350 ("macsec: check return value of skb_to_sgvec always")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 11 Oct 2017 02:12:33 +0000 (19:12 -0700)]
net: call cgroup_sk_alloc() earlier in sk_clone_lock()
If for some reason, the newly allocated child need to be freed,
we will call cgroup_put() (via sk_free_unlock_clone()) while the
corresponding cgroup_get() was not yet done, and we will free memory
too soon.
Fixes:
d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 11 Oct 2017 02:12:32 +0000 (19:12 -0700)]
Revert "net: defer call to cgroup_sk_alloc()"
This reverts commit
fbb1fb4ad415cb31ce944f65a5ca700aaf73a227.
This was not the proper fix, lets cleanly revert it, so that
following patch can be carried to stable versions.
sock_cgroup_ptr() callers do not expect a NULL return value.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Oct 2017 20:18:34 +0000 (13:18 -0700)]
Merge branch 'nfp-fix-ethtool-stats-and-page-allocation'
Jakub Kicinski says:
====================
nfp: fix ethtool stats and page allocation
Two fixes for net. First one makes sure we handle gather of stats on
32bit machines correctly (ouch). The second fix solves a potential
NULL-deref if we fail to allocate a page with XDP running.
I used Fixes: tags pointing to where the bug was introduced, but for
patch 1 it has been in the driver "for ever" and fix won't backport
cleanly beyond commit
325945ede6d4 ("nfp: split software and hardware
vNIC statistics") which is in net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Oct 2017 16:16:23 +0000 (09:16 -0700)]
nfp: handle page allocation failures
page_address() does not handle NULL argument gracefully,
make sure we NULL-check the page pointer before passing it
to page_address().
Fixes:
ecd63a0217d5 ("nfp: add XDP support in the driver")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 10 Oct 2017 16:16:22 +0000 (09:16 -0700)]
nfp: fix ethtool stats gather retry
The while loop fetching 64 bit ethtool statistics may have
to retry multiple times, it shouldn't modify the outside state.
Fixes:
4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 10 Oct 2017 20:17:11 +0000 (13:17 -0700)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2017-10-10
This series contains updates to i40e only.
Stefano Brivio fixes the grammar in a function header comment.
Alex fixes a memory leak where we were not correctly placing the pages
from buffers that had been used to return a filter programming status
back on the ring.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Behan Webster [Mon, 9 Oct 2017 19:41:53 +0000 (12:41 -0700)]
wimax/i2400m: Remove VLAIS
Convert Variable Length Array in Struct (VLAIS) to valid C by converting
local struct definition to use a flexible array. The structure is only
used to define a cast of a buffer so the size of the struct is not used
to allocate storage.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Mark Charebois <charlebm@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Wed, 4 Oct 2017 15:44:43 +0000 (08:44 -0700)]
i40e: Fix memory leak related filter programming status
It looks like we weren't correctly placing the pages from buffers that had
been used to return a filter programming status back on the ring. As a
result they were being overwritten and tracking of the pages was lost.
This change works to correct that by incorporating part of
i40e_put_rx_buffer into the programming status handler code. As a result we
should now be correctly placing the pages for those buffers on the
re-allocation list instead of letting them stay in place.
Fixes:
0e626ff7ccbf ("i40e: Fix support for flow director programming status")
Reported-by: Anders K. Pedersen <akp@cohaesio.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Anders K Pedersen <akp@cohaesio.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Stefano Brivio [Wed, 6 Sep 2017 08:11:38 +0000 (10:11 +0200)]
i40e: Fix comment about locking for __i40e_read_nvm_word()
Caller needs to acquire the lock. Called functions will not.
Fixes:
09f79fd49d94 ("i40e: avoid NVM acquire deadlock during NVM update")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Eric Dumazet [Mon, 9 Oct 2017 04:44:52 +0000 (21:44 -0700)]
net: defer call to cgroup_sk_alloc()
sk_clone_lock() might run while TCP/DCCP listener already vanished.
In order to prevent use after free, it is better to defer cgroup_sk_alloc()
to the point we know both parent and child exist, and from process context.
Fixes:
e994b2f0fb92 ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 9 Oct 2017 04:44:51 +0000 (21:44 -0700)]
net: memcontrol: defer call to mem_cgroup_sk_alloc()
Instead of calling mem_cgroup_sk_alloc() from BH context,
it is better to call it from inet_csk_accept() in process context.
Not only this removes code in mem_cgroup_sk_alloc(), but it also
fixes a bug since listener might have been dismantled and css_get()
might cause a use-after-free.
Fixes:
e994b2f0fb92 ("tcp: do not lock listener to process SYN packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 10 Oct 2017 02:08:32 +0000 (19:08 -0700)]
Merge branch 'ppc-bundle' (bundle from Michael Ellerman)
Merge powerpc transactional memory fixes from Michael Ellerman:
"I figured I'd still send you the commits using a bundle to make sure
it works in case I need to do it again in future"
This fixes transactional memory state restore for powerpc.
* bundle'd patches from Michael Ellerman:
powerpc/tm: Fix illegal TM state in signal handler
powerpc/64s: Use emergency stack for kernel TM Bad Thing program checks
Linus Torvalds [Mon, 9 Oct 2017 23:25:00 +0000 (16:25 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix object leak on IPSEC offload failure, from Steffen Klassert.
2) Fix range checks in ipset address range addition operations, from
Jozsef Kadlecsik.
3) Fix pernet ops unregistration order in ipset, from Florian Westphal.
4) Add missing netlink attribute policy for nl80211 packet pattern
attrs, from Peng Xu.
5) Fix PPP device destruction race, from Guillaume Nault.
6) Write marks get lost when BPF verifier processes R1=R2 register
assignments, causing incorrect liveness information and less state
pruning. Fix from Alexei Starovoitov.
7) Fix blockhole routes so that they are marked dead and therefore not
cached in sockets, otherwise IPSEC stops working. From Steffen
Klassert.
8) Fix broadcast handling of UDP socket early demux, from Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits)
cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwan
net: thunderx: mark expected switch fall-throughs in nicvf_main()
udp: fix bcast packet reception
netlink: do not set cb_running if dump's start() errs
ipv4: Fix traffic triggered IPsec connections.
ipv6: Fix traffic triggered IPsec connections.
ixgbe: incorrect XDP ring accounting in ethtool tx_frame param
net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
Revert commit
1a8b6d76dc5b ("net:add one common config...")
ixgbe: fix masking of bits read from IXGBE_VXLANCTRL register
ixgbe: Return error when getting PHY address if PHY access is not supported
netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'
netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hook
tipc: Unclone message at secondary destination lookup
tipc: correct initialization of skb list
gso: fix payload length when gso_size is zero
mlxsw: spectrum_router: Avoid expensive lookup during route removal
bpf: fix liveness marking
doc: Fix typo "8023.ad" in bonding documentation
ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real
...
Aleksander Morgado [Mon, 9 Oct 2017 12:05:12 +0000 (14:05 +0200)]
cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwan
The u-blox TOBY-L2 is a LTE Cat 4 module with HSPA+ and 2G fallback.
This module allows switching to different USB profiles with the
'AT+UUSBCONF' command, and provides a ECM network interface when the
'AT+UUSBCONF=2' profile is selected.
The u-blox SARA-U2 is a HSPA module with 2G fallback. The default USB
configuration includes a ECM network interface.
Both these modules are controlled via AT commands through one of the
TTYs exposed. Connecting these modules may be done just by activating
the desired PDP context with 'AT+CGACT=1,<cid>' and then running DHCP
on the ECM interface.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 9 Oct 2017 17:55:37 +0000 (10:55 -0700)]
Merge tag 'nfs-for-4.14-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Hightlights include:
stable fixes:
- nfs/filelayout: fix oops when freeing filelayout segment
- NFS: Fix uninitialized rpc_wait_queue
bugfixes:
- NFSv4/pnfs: Fix an infinite layoutget loop
- nfs: RPC_MAX_AUTH_SIZE is in bytes"
* tag 'nfs-for-4.14-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4/pnfs: Fix an infinite layoutget loop
nfs/filelayout: fix oops when freeing filelayout segment
sunrpc: remove redundant initialization of sock
NFS: Fix uninitialized rpc_wait_queue
NFS: Cleanup error handling in nfs_idmap_request_key()
nfs: RPC_MAX_AUTH_SIZE is in bytes
Gustavo A. R. Silva [Mon, 9 Oct 2017 16:44:53 +0000 (11:44 -0500)]
net: thunderx: mark expected switch fall-throughs in nicvf_main()
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Cc: Sunil Goutham <sgoutham@cavium.com>
Cc: Robert Richter <rric@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Oct 2017 17:39:52 +0000 (10:39 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:
1) Fix packet drops due to incorrect ECN handling in IPVS, from Vadim
Fedorenko.
2) Fix splat with mark restoration in xt_socket with non-full-sock,
patch from Subash Abhinov Kasiviswanathan.
3) ipset bogusly bails out when adding IPv4 range containing more than
2^31 addresses, from Jozsef Kadlecsik.
4) Incorrect pernet unregistration order in ipset, from Florian Westphal.
5) Races between dump and swap in ipset results in BUG_ON splats, from
Ross Lagerwall.
6) Fix chain renames in nf_tables, from JingPiao Chen.
7) Fix race in pernet codepath with ebtables table registration, from
Artem Savkov.
8) Memory leak in error path in set name allocation in nf_tables, patch
from Arvind Yadav.
9) Don't dump chain counters if they are not available, this fixes a
crash when listing the ruleset.
10) Fix out of bound memory read in strlcpy() in x_tables compat code,
from Eric Dumazet.
11) Make sure we only process TCP packets in SYNPROXY hooks, patch from
Lin Zhang.
12) Cannot load rules incrementally anymore after xt_bpf with pinned
objects, added in revision 1. From Shmulik Ladkani.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 9 Oct 2017 17:36:25 +0000 (10:36 -0700)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2017-10-09
This series contains updates to ixgbe and arch/Kconfig.
Mark fixes a case where PHY register access is not supported and we were
returning a PHY address, when we should have been returning -EOPNOTSUPP.
Sabrina Dubroca fixes the use of a logical "and" when it should have been
the bitwise "and" operator.
Ding Tianhong reverts the commit that added the Kconfig bool option
ARCH_WANT_RELAX_ORDER, since there is now a new flag
PCI_DEV_FLAGS_NO_RELAXED_ORDERING that has been added to indicate that
Relaxed Ordering Attributes should not be used for Transaction Layer
Packets. Then follows up with making the needed changes to ixgbe to
use the new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag.
John Fastabend fixes an issue in the ring accounting when the transmit
ring parameters are changed via ethtool when an XDP program is attached.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Mon, 9 Oct 2017 12:52:10 +0000 (14:52 +0200)]
udp: fix bcast packet reception
The commit
bc044e8db796 ("udp: perform source validation for
mcast early demux") does not take into account that broadcast packets
lands in the same code path and they need different checks for the
source address - notably, zero source address are valid for bcast
and invalid for mcast.
As a result, 2nd and later broadcast packets with 0 source address
landing to the same socket are dropped. This breaks dhcp servers.
Since we don't have stringent performance requirements for ingress
broadcast traffic, fix it by disabling UDP early demux such traffic.
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Fixes:
bc044e8db796 ("udp: perform source validation for mcast early demux")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / GitHub / MotorolaMobilityLLC / kernel-slsi.git / log