GitHub/LineageOS/android_kernel_motorola_exynos9610.git
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Mon, 12 Sep 2005 20:32:56 +0000 (13:32 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Mon, 12 Sep 2005 20:32:20 +0000 (13:32 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6
Linus Torvalds [Mon, 12 Sep 2005 20:31:33 +0000 (13:31 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/i2c-2.6

19 years agoMerge ../torvalds-2.6/
Greg KH [Mon, 12 Sep 2005 19:45:04 +0000 (12:45 -0700)]
Merge ../torvalds-2.6/

19 years ago[PATCH] crc16: remove w1 specific comments.
Evgeniy Polyakov [Mon, 12 Sep 2005 13:12:43 +0000 (17:12 +0400)]
[PATCH] crc16: remove w1 specific comments.

Remove w1 comments from crc16.h and move
specific constants into w1_ds2433.c where they are used.
Replace %d with %zd.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6
Linus Torvalds [Mon, 12 Sep 2005 19:34:45 +0000 (12:34 -0700)]
Merge /pub/scm/linux/kernel/git/aia21/ntfs-2.6

19 years agoFix fallout from ATI Xpress timer workaround
Linus Torvalds [Mon, 12 Sep 2005 19:32:31 +0000 (12:32 -0700)]
Fix fallout from ATI Xpress timer workaround

ACPI earlyquirks needs to honor the proper config variables, and include
the right header file.

(Fixes commit 66759a01adbfe8828dd063e32cf5ed3f46696181)

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] USB: ftdi_sio: custom baud rate fix
Ian Abbott [Mon, 12 Sep 2005 11:23:25 +0000 (12:23 +0100)]
[PATCH] USB: ftdi_sio: custom baud rate fix

ftdi_sio: I messed up the baud_base for custom baud rate support in
2.6.13.  The attached one-liner patch fixes it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: Usbmon setup DMA patch
Pete Zaitcev [Thu, 1 Sep 2005 21:35:05 +0000 (14:35 -0700)]
[PATCH] USB: Usbmon setup DMA patch

Alan Stern sent me this patch. It goes on top of the patch the adds
mon_dmapeek:
 http://ftp.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-04-usb/usb-usbmon-dma-areas.patch

Please be warned about ordering requirements or the build may fail.

Actually, mon_dmapeek is generic enough to support SETUP packets too.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] usb: fix uss720 schedule with interrupts off
Thomas Sailer [Fri, 9 Sep 2005 08:43:50 +0000 (10:43 +0200)]
[PATCH] usb: fix uss720 schedule with interrupts off

This patch fixes the long standing schedule with interrupts off problem
of the uss720 driver. The problem is caused by the parport layer calling
the save and restore methods within a write_lock_irqsave guarded region.
The fix is to issue the control transaction requests required by save
and restore asynchronously.

Signed-off-by: Thomas Sailer, <sailer@ife.ee.ethz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: fix usbdevice_fs header breakage
Harald Welte [Sat, 3 Sep 2005 09:27:08 +0000 (11:27 +0200)]
[PATCH] USB: fix usbdevice_fs header breakage

[USBDEVFS] fix inclusion of <linux/compat.h> to avoud header mess

Without moving the include of compat.h down, userspace programs that use
usbdevice_fs.h end up including half the kernel includes (and eventually
fail to compile).

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: usb-storage: Add unusual_devs entry for Neuros Audio MP3 player
Daniel Drake [Wed, 31 Aug 2005 15:38:41 +0000 (16:38 +0100)]
[PATCH] USB: usb-storage: Add unusual_devs entry for Neuros Audio MP3 player

Alan Stern wrote:
> If the device sometimes reports the correct values, then you should
> include NEED_OVERRIDE flag to prevent messages about unnecessary
> overrides showing up in the system log.  Also, if bInterfaceSubclass
> is correct and only bInterfaceProtocol is wrong, then the entry should
> say US_SC_DEVICE instead of US_SC_SCSI.

Fair points, thanks.

When connected over USB2, this device reports a nonsense
bInterfaceProtocol value 6 and doesn't work with usb-storage.  When
connected over USB1, the device reports the correct bInterfaceProtocol
value 0x50 (bulk) and works with no problems.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: storage: Add unusual_dev SINGLE_LUN entries
Phil Dibowitz [Tue, 30 Aug 2005 05:38:28 +0000 (22:38 -0700)]
[PATCH] USB: storage: Add unusual_dev SINGLE_LUN entries

This patch adds entries for several USB floppies that need
the US_FL_SINGLE_LUN flag. These were reported by
Sebastian Kapfer <sebastian_kapfer@gmx.net> and Olaf Hering
<olh@suse.de>, with rediffing and cleaning from me.

Reported-by: Sebastian Kapfer <sebastian_kapfer@gmx.net>
Reported-by: Olaf Hering <olh@suse.de>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB Storage: unusual_devs.h request for Transcend
Pete Zaitcev [Tue, 23 Aug 2005 14:46:13 +0000 (07:46 -0700)]
[PATCH] USB Storage: unusual_devs.h request for Transcend

The stick replies to the door lock commands with a check condition (e.g.
FAIL status in a normal bulk CSW), but the subsequent REQUEST SENSE
returns all-zero sense. The situation is documented in our Bugzilla,
including usbmon traces.
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=162559

The error is purely cosmetic, data integrity is not in danger.
But I thought we might as well do it. It looks nicer that way.

I discussed this with Phil and he told me to submit directly.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: storage: Fix messed-up locking
Matthew Dharm [Fri, 26 Aug 2005 03:03:50 +0000 (20:03 -0700)]
[PATCH] USB: storage: Fix messed-up locking

This is patch as550 from Alan Stern.

Apparently someone changed the SCSI core so that it no longer holds the
host lock when doing a device or bus reset.  usb-storage was updated at
the time, but the change was done carelessly.  Some of the code depends
on that lock being held.

This patch reintroduces the host lock where needed and tries to clarify
the comments explaining why the lock is necessary.  It also moves the
code that clears the TIMED_OUT and ABORTING bitflags so that it executes
as soon as the timed-out command has completed (and while the host lock
is held).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: relax usbcore reset timings
David Brownell [Wed, 31 Aug 2005 17:41:44 +0000 (10:41 -0700)]
[PATCH] USB: relax usbcore reset timings

This appears to help some folk, please merge.
This patch relaxes reset timings.  There are some reports that it
helps make enumeration work better on some high speed devices.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: proc_usb_info.txt: add blank lines
Randy Dunlap [Fri, 9 Sep 2005 04:56:56 +0000 (21:56 -0700)]
[PATCH] USB: proc_usb_info.txt: add blank lines

Update Documentation/usb/proc_usb_info.txt:
- remove some trailing whitespace
- add a blank line before each T: line to match current kernel
  and to make the text more readable.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: PL2303: CA-42 Phone cable
Robert Spanton [Tue, 30 Aug 2005 22:38:23 +0000 (23:38 +0100)]
[PATCH] USB: PL2303: CA-42 Phone cable

This patch adds the product ID and vendor ID for a Nokia CA-42 USB cable
to the list of devices handled by the pl2303 driver. The patch is
against 2.6.13.

Signed-off-by: Robert Spanton <rds204@zepler.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: OHCI, pxa27x OHCI port power tweaks
David Brownell [Wed, 31 Aug 2005 18:54:09 +0000 (11:54 -0700)]
[PATCH] USB: OHCI, pxa27x OHCI port power tweaks

Now that it's in use on other boards, a bug in the original code needs fixing.

There is no need for the PXA27x OHCI to set usb power during init, since
the hub driver in usbcore handles that. Those platform-specific power
control functions are also incorrect, and should therefore be removed.

Add a check to clear the OTG pin hold bit until such times OTG is
properly implemented.

Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: OHCI relies less on NDP register
David Brownell [Wed, 31 Aug 2005 18:52:57 +0000 (11:52 -0700)]
[PATCH] USB: OHCI relies less on NDP register

Some OHCI implementations have differences in the way the NDP register
(in roothub_a) reports the number of ports present. This patch allows the
platform specific code to optionally supply the number of ports. The
driver just reads the value at init (if not supplied) instead of reading
it every time its needed (except for an AMD756 bug workaround).

It also sets the value correctly for the ARM pxa27x architecture.

Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: OHCI irq tweak
David Brownell [Wed, 31 Aug 2005 17:47:20 +0000 (10:47 -0700)]
[PATCH] USB: OHCI irq tweak

Evidently there are some boards which care a lot about this, but
as a rule it's been hard to notice.

OHCI_INTR_RD wasn't always cleared in the ohci irq handler.  On some
systems this means certain remote wakeup scenarios could seem to hang
(in an interrupt storm, RD never clearing).

From: "William Morrow" <William.Morrow@amd.com>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB gadgetfs: fixes an error on writing to endpoint file
Pavol Kurina [Wed, 7 Sep 2005 16:49:34 +0000 (09:49 -0700)]
[PATCH] USB gadgetfs: fixes an error on writing to endpoint file

this patch fixes an "Invalid argument" error returned by a write to an
endpoint-file after reopening it in the gadgetfs module in the kernel
2.6.12.

This was testet only with dummy_hcd module!

Signed-off-by: Pavol Kurina <kurina@gmx.net>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
19 years ago[PATCH] drivers/usb: fix-up schedule_timeout() usage
Nishanth Aravamudan [Mon, 15 Aug 2005 18:30:11 +0000 (11:30 -0700)]
[PATCH] drivers/usb: fix-up schedule_timeout() usage

Description: Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: get rid of minor log spamming
David Brownell [Wed, 31 Aug 2005 17:45:25 +0000 (10:45 -0700)]
[PATCH] USB: get rid of minor log spamming

Routine cases like handoff-to-companion shouldn't trigger diagnostics.
This gets rid of some recently added log spamming.  It's routine for
hub_port_wait_reset() to return -ENOTCONN to indicate handoff from
highspeed hubs to companions, so an error message is incorrect.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: EHCI workaround for NForce and mem > 2GB
David Brownell [Sat, 3 Sep 2005 01:58:09 +0000 (18:58 -0700)]
[PATCH] USB: EHCI workaround for NForce and mem > 2GB

NVidia reports (via Mark Overby) that some of their EHCI controllers
don't like certain data structure addresses beyond the 2GB mark.
He provided an earlier version of this patch.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: EHCI port tweaks
David Brownell [Wed, 31 Aug 2005 17:55:38 +0000 (10:55 -0700)]
[PATCH] USB: EHCI port tweaks

One change may improve some S1 or S3 resume cases, and the other
seems mostly to explain some strange state "lsusb" would show.
Two fixes:

  - On resume, don't think about resuming any unpowered port, or
    resetting any port with OWNER set to the OHCI/UHCI companion.
    This will make some S1 and S3 resume scenarios work better.

  - PORT_CSC was not being cleared correctly in ehci_hub_status_data.
    This was visible at least through current versions of "lsusb",
    and might have caused some other hub related strangeness.

    The fix addresses all three write-to-clear bits, using the same
    approach that UHCI happens to use:  a mask of bits that are
    cleared in most writes to that port status register.

Original patch seems to have been from from William.Morrow@amd.com
and this version (from David) finishes the write-to-clear changes.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: CP2101 New Device IDs
Craig Shelley [Sun, 28 Aug 2005 08:51:15 +0000 (09:51 +0100)]
[PATCH] USB: CP2101 New Device IDs

Three new device IDs for CP2101 USB to UART Bridge

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB UHCI: remove the FSBR kernel timer
Alan Stern [Mon, 5 Sep 2005 17:59:51 +0000 (13:59 -0400)]
[PATCH] USB UHCI: remove the FSBR kernel timer

This patch (as558) removes from the UHCI driver a kernel timer used for
checking Full Speed Bandwidth Reclamation (FSBR).  The checking can be
done during normal root-hub polling; it doesn't need a separate timer.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] usbcore: small changes to HCD glue layer
Alan Stern [Mon, 5 Sep 2005 17:55:23 +0000 (13:55 -0400)]
[PATCH] usbcore: small changes to HCD glue layer

This patch (as549) introduces two small changes in the HCD glue layer.
The first simply removes a redundant test.  The second allows root-hub
polling to continue for a single iteration after a host controller dies;
this is needed for the patch that follows.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: add apple usb touchpad driver
Stelian Pop [Thu, 8 Sep 2005 08:19:48 +0000 (10:19 +0200)]
[PATCH] USB: add apple usb touchpad driver

This is a driver for the USB touchpad which can be found on post-February 2005
Apple PowerBooks.

This driver is derived from Johannes Berg's appletrackpad driver [1],
but it has been improved in some areas:
    * appletouch is a full kernel driver, no userspace program is necessary
    * appletouch can be interfaced with the synaptics X11 driver[2], in order
      to have touchpad acceleration, scrolling, two/three finger tap, etc.

This driver has been tested by the readers of the 'debian-powerpc' mailing
list for a few weeks now and I believe it is now ready for inclusion into the
mainline kernel.

Credits go to Johannes Berg for reverse-engineering the touchpad protocol,
Frank Arnold for further improvements, and Alex Harper for some additional
information about the inner workings of the touchpad sensors.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] USB: sisusb[vga] update
Thomas Winischhofer [Mon, 29 Aug 2005 15:01:16 +0000 (17:01 +0200)]
[PATCH] USB: sisusb[vga] update

here is a new and extended version of the sisusbvga (previously: sisusb)
driver. The patch is against 2.6.13 and updates the driver to version 0.0.8.

Additions include complete VGA/EGA text console support and a build-in
display mode infrastructure for userland applications that don't know
 about the graphics internals.

Fixes include some BE/LE issues and a get/put_dev bug in the previous
version.

Other changes include a change of the module name from "sisusb" to
"sisusbvga". The previous one was too generic IMHO.

Please note that the patch also affects the Makefile in
drivers/video/console as the driver requires the VGA 8x16 font in case
the text console part is selected.

Heavily tested, as usual. Please apply.

One thing though: I already prepared for removal of the "mode" field and
the changed "name" field in the usb_class_driver structure. This will
perhaps need some refinement depending on whether you/Linus merge the
respective core changes before or after 2.6.14.

Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years agoMerge ../torvalds-2.6/
Greg KH [Mon, 12 Sep 2005 19:10:59 +0000 (12:10 -0700)]
Merge ../torvalds-2.6/

19 years agoRevert "[PATCH] USB: Prevent hid-core claiming Apple Bluetooth device on new G4 power...
Greg KH [Mon, 12 Sep 2005 18:58:07 +0000 (11:58 -0700)]
Revert "[PATCH] USB: Prevent hid-core claiming Apple Bluetooth device on new G4 powerbooks"

   This reverts 22af8878d2d641c6b15fe39fe4de3c05b2c477f0 commit.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
19 years ago[PATCH] x86-64: clean up local_add/sub arguments
Andi Kleen [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: clean up local_add/sub arguments

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Use correct mask to compute conflicting nodes in SRAT
Andi Kleen [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: Use correct mask to compute conflicting nodes in SRAT

The nodes are not set online yet at this point.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: reset apicid<->node tables when SRAT cannot be parsed
Andi Kleen [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: reset apicid<->node tables when SRAT cannot be parsed

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Clean up the SRAT node list before computing the hash function
Andi Kleen [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: Clean up the SRAT node list before computing the hash function

Also use for_each_node_mask instead of hand crafted loops.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: i386/x86-64: Fix time going twice as fast problem on ATI Xpress chipsets
Chuck Ebbert [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: i386/x86-64: Fix time going twice as fast problem on ATI Xpress chipsets

Original patch from Bertro Simul

This is probably still not quite correct, but seems to be
the best solution so far.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: reduce x86-64 bug frame by 4 bytes
Jan Beulich [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: reduce x86-64 bug frame by 4 bytes

As mentioned before, the size of the bug frame can be further reduced while
continuing to use instructions to encode the information.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Make dmi_find_device for !DMI case inline
Andi Kleen [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: Make dmi_find_device for !DMI case inline

Otherwise it will generate warnings and be generated many times.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Allow frame pointer and fix help text.
Andi Kleen [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: Allow frame pointer and fix help text.

Allow frame pointer and fix help text.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: more gratitious linux/irq.h includes
Al Viro [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: more gratitious linux/irq.h includes

... and with that all instances in arch/x86_64 are gone.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix incorrect FP signals
Chuck Ebbert [Mon, 12 Sep 2005 16:49:25 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix incorrect FP signals

This is the same patch that went into i386 just before 2.6.13
came out.  I still can't build 64-bit user apps, so I tested
with program (see below) in 32-bit mode on 64-bit kernel:

Before:

$ fpsig
handler: nr = 8, si = 0x0804bc90, vuc = 0x0804bd10
handler: altstack is at 0x0804b000, ebp = 0x0804bc7c
handler: si_signo = 8, si_errno = 0, si_code = 0 [unknown]
handler: fpu cwd = 0xb40, fpu swd = 0xbaa0
handler: i387 unmasked precision exception, rounded up

After:

$ fpsig
handler: nr = 8, si = 0x0804bc90, vuc = 0x0804bd10
handler: altstack is at 0x0804b000, ebp = 0x0804bc7c
handler: si_signo = 8, si_errno = 0, si_code = 6 [inexact result]
handler: fpu cwd = 0xb40, fpu swd = 0xbaa0
handler: i387 unmasked precision exception, rounded up

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Clean up nmi error message
Chuck Ebbert [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Clean up nmi error message

The x86_64 nmi code is missing a newline in one of its messages.

I added a space before the CPU id for readability and killed the trailing
space on the previous line as well.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Lose constraints on cmpxchg
Jan Beulich [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Lose constraints on cmpxchg

While only cosmetic for x86-64, this adjusts the cmpxchg code appearantly
inherited from i386 to use more generic constraints.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Declare NMI_VECTOR and handle it in the IPI sending code.
Jan Beulich [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Declare NMI_VECTOR and handle it in the IPI sending code.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove unused vxtime.hz field
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove unused vxtime.hz field

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Set the stack pointer correctly in init_thread and init_tss
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Set the stack pointer correctly in init_thread and init_tss

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Safe interrupts in oops_begin/end
Jan Beulich [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Safe interrupts in oops_begin/end

Rather than blindly re-enabling interrupts in oops_end(), save their state
in oope_begin() and then restore that state.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Merge msr.c with i386 version
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Merge msr.c with i386 version

The only difference was the inline assembly, so move that into
asm/msr.h and merge with the i386 version.

This adds some missing sysfs support code to x86-64.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Clean up includes in arch/x86_64/kernel/suspend.c
Al Viro [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Clean up includes in arch/x86_64/kernel/suspend.c

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix CFI information
Jan Beulich [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix CFI information

Being the foundation for reliable stack unwinding, this fixes CFI unwind
annotations in many low-level x86_64 routines, plus a config option
(available to all architectures, and also present in the previously sent
patch adding such annotations to i386 code) to enable them separatly
rather than only along with adding full debug information.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix gcc 4 warnings about pointer signedness
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix gcc 4 warnings about pointer signedness

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Use physflat on Intel for < 8 CPUs with CPU hotplug
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Use physflat on Intel for < 8 CPUs with CPU hotplug

This avoids races with the APIC broadcast/mask modes.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Add dma_sync_single_range_for_{cpu,device}
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Add dma_sync_single_range_for_{cpu,device}

Currently just defined to their non range parts.

Pointed out by John Linville

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Improve error handling for overlapping PXMs in SRAT.
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Improve error handling for overlapping PXMs in SRAT.

- Report PXMs instead of nodes
- Report the correct PXM, not always the one of node 1.
- Only warn for the case of a PXM overlapping by itself

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Prevent gcc 4 from optimizing away vsyscalls
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Prevent gcc 4 from optimizing away vsyscalls

They were previously static.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Delivery mode should be APIC_DM_FIXED when using physical mode.
Ashok Raj [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Delivery mode should be APIC_DM_FIXED when using physical mode.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Replace extern inline with static inline in asm-x86_64/*
Adrian Bunk [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] Replace extern inline with static inline in asm-x86_64/*

They should be identical in the kernel now, but this
makes it consistent with other code.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove freeing of SMP trampoline pages
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove freeing of SMP trampoline pages

Nick points out it never worked because PageReserved was
set and it might cause problems later on. Also HOTPLUG_CPU
is much more common now so let's care not too much
about the !hotplug case.

Cc: nickpiggin@yahoo.com.au
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix typo CONFIG_CPU_HOTPLUG -> CONFIG_HOTPLUG_CPU in genapic.c
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix typo CONFIG_CPU_HOTPLUG -> CONFIG_HOTPLUG_CPU in genapic.c

Noted by Ashok Raj

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Remove unnecessary BUG_ON in irq.c
Alexander Nyberg [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] Remove unnecessary BUG_ON in irq.c

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Increase nodemap hash.
Nakul Saraiya [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] Increase nodemap hash.

Needed for some newer Opteron systems with E stepping and memory
relocation enabled. The node addresses are different in lower
bits now so the nodemap hash function needs to be enlarged.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix off by one in pfn_valid
Jim Paradis [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix off by one in pfn_valid

When I gave proposed the fix to pfn_valid() for RHEL4, Stephen Tweedie's
sharp eyes caught this:

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] i386: add memory clobbers to syscall macros
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] i386: add memory clobbers to syscall macros

As noted by matz@suse.de

The problem is, that on i386 the syscallN
macro is defined like so:

  long __res; \
  __asm__ volatile ("int $0x80" \
        : "=a" (__res) \
        : "0" (__NR_##name),"b" ((long)(arg1)),"c" ((long)(arg2)), \
          "d" ((long)(arg3)),"S" ((long)(arg4)),"D" ((long)(arg5))); \

If one of the arguments (in the _llseek syscall it's the arg4) is a pointer
which the syscall is expected to write to (to the memory pointed to by this
ptr), then this side-effect is not captured in the asm.

If anyone uses this macro to define it's own version of the syscall
(sometimes necessary when not using glibc) and it's inlined, then GCC
doesn't know that this asm write to "*dest", when called like so for instance:

  out = 1;
  llseek (fd, bla, blubb, &out, trara)
  use (out);

Here nobody tells GCC that "out" actually is written to (just a pointer to it
is passed to the asm).  Hence GCC might (and in the above bug did)
copy-propagate "1" into the second use of "out".

The easiest solution would be to add a "memory" clobber to the definition
of this syscall macro.  As this is a syscall, it shouldn't inhibit too many
optimizations.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix show_mem a little bit
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix show_mem a little bit

- Add KERN_INFO to printks (from i386)
- Use longs instead of ints to accumulate pages.
- Fix broken indenting.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove disable_tsc code in context switch
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove disable_tsc code in context switch

It only offers extremly dubious security advantages and
is not worth the overhead in this critical path.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Print version at end of kernel build
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Print version at end of kernel build

(from i386)

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix (harmless) typo in head.S early level2 page table
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix (harmless) typo in head.S early level2 page table

The global bit  was not set in the first 2MB page, instead
it had a bit in the free AVL section which is useless.
Fixed thus.

Noticed by Eric Biederman

Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix idle=poll
Hugh Dickins [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix idle=poll

x86_64 idle=poll might be a little less responsive than it should: unlike
mwait_idle, and unlike i386, its poll_idle left TIF_POLLING_NRFLAG set.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Only allocate per cpu data for possible CPUs, not compiled in CPUs.
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Only allocate per cpu data for possible CPUs, not compiled in CPUs.

Saves some memory except for hotplug situations.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Increase TLB flush array size
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Increase TLB flush array size

The generic TLB flush functions kept upto 506 pages per
CPU to avoid too frequent IPIs.

This value was done for the L1 cache of older x86 CPUs,
but with modern CPUs it does not make much sense anymore.
TLB flushing is slow enough that using the L2 cache is fine.

This patch increases the flush array on x86-64 to cache
5350 pages. That is roughly 20MB with 4K pages. It speeds
up large munmaps in multithreaded processes on SMP considerably.

The cost is roughly 42k of memory per CPU, which is reasonable.

I only increased it on x86-64 for now, but it would probably
make sense to increase it everywhere. Embedded architectures
with SMP may keep it smaller to save some memory per CPU.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Don't include config.h in asm/timex.h
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Don't include config.h in asm/timex.h

asm-x86-64/timex.h does not reference CONFIG constants.
Do not need to include config.h.

Signed-off-by: Grant Grundler <iod00d@hp.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Some cleanup and optimization to the processor data area.
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Some cleanup and optimization to the processor data area.

- Remove unused irqrsp field
- Remove pda->me
- Optimize set_softirq_pending slightly

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Add simnow console
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Add simnow console

This adds console and earlyprintk support for a host file
on AMD's SimNow simulator.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Make remote TLB flush more scalable
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Make remote TLB flush more scalable

Instead of using a global spinlock to protect the state
of the remote TLB flush use a lock and state for each sending CPU.

To tell the receiver where to look for the state use 8 different
call vectors.  Each CPU uses a specific vector to trigger flushes on other
CPUs. Depending on the received vector the target CPUs look into
the right per cpu variable for the flush data.

When the system has more than 8 CPUs they are hashed to the 8 available
vectors. The limited global vector space forces us to this right now.
In future when interrupts are split into per CPU domains this could be
fixed, at the cost of needing more IPIs in flat mode.

Also some minor cleanup in the smp flush code and remove some outdated
debug code.

Requires patch to move cpu_possible_map setup earlier.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix 32bit sendfile
Tsuneo.Yoshioka@f-secure.com [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix 32bit sendfile

If we use 64bit kernel on ia64/x86_64/s390 architecture, and we run
32bit binary on 32bit compatibility mode, sendfile system call seems be
not set offset argument.

This is because sendfile's return value is not zero but the code regards
the result by return value is zero or not.

This problem will be affect to ia64/x86_64/s390 and not affect to other
architecture does not affect other architecture (mips/parisc/ppc64/sparc64).

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Include build number in oops output
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Include build number in oops output

Include build number in oops output

Helps me to match oopses to correct kernel.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Use ACPI PXM to parse PCI<->node assignments
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Use ACPI PXM to parse PCI<->node assignments

Since this is shared code I had to implement it for i386 too

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove code to resume machine check state of other CPUs.
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove code to resume machine check state of other CPUs.

The resume code uses CPU hotplug now so at resume time
we only ever see one CPU.

Pointed out by Yu Luming.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove redundant max_mapnr and replace with end_pfn
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove redundant max_mapnr and replace with end_pfn

The FLATMEM people added it, but there doesn't seem a good reason
because end_pfn is identical.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Use e820_find_hole to compute reserved pages
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Use e820_find_hole to compute reserved pages

Avoids a very dumb loop

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix harmless off by one in e820 code
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix harmless off by one in e820 code

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Micro optimization to dma_alloc_coherent node lookup
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Micro optimization to dma_alloc_coherent node lookup

Use pcibus_to_node directly

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Don't trust boot_cpu_id in the mptable.
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Don't trust boot_cpu_id in the mptable.

It could be wrong for kexec or other cases. Read it from
the CPU instead.

Signed-off-by: Murali <muralim@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Add command line option to set machine check tolerance level
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Add command line option to set machine check tolerance level

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Make lockless machine check record passing a bit more robust.
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Make lockless machine check record passing a bit more robust.

One machine is constantly throwing NMI watchdog timeouts in mce_log

This was one attempt to fix it.

(AK: this doesn't actually fix the bug I'm seeing unfortunately, probably
drop.  I don't like it that the reader can spin forever now waiting
for a writer)

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Remove redundant swiotlb=force handling
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Remove redundant swiotlb=force handling

It's already handled in the main swiotlb code.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Don't allocate aperture when swiotlb is enabled and no AGP found
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Don't allocate aperture when swiotlb is enabled and no AGP found

No-one needs it then

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Reverse order of bootmem lists
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Reverse order of bootmem lists

This leads to bootmem allocating first from node 0 instead
of from the last node.  This avoids swiotlb allocating on the last node, which
doesn't really work on a machine with >4GB.

Note: there is a better patch around from someone else that gets
rid of the pgdat list completely.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Avoid unnecessary double bouncing for swiotlb
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Avoid unnecessary double bouncing for swiotlb

PCI_DMA_BUS_IS_PHYS has to be zero even when the GART IOMMU is disabled
and the swiotlb is used. Otherwise the block layer does unnecessary
double bouncing.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Don't assume APIC for boot processor has an APIC ID of zero
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Don't assume APIC for boot processor has an APIC ID of zero

Originally from Stuart Hayes.

When setting up the APIC for the Uniprocessor kernel don't
assume the CPU has an APIC ID of zero.

This fixes boot with the UP kernel on Dell PowerEdge 6800/6850 4way systems.

Cc: Stuart.Hayes@dell.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Use SRAT data on Intel systems too.
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Use SRAT data on Intel systems too.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Support dualcore and 8 socket systems in k8 fallback node parsing
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Support dualcore and 8 socket systems in k8 fallback node parsing

In particular on systems where the local APIC space and node space
is very different from the Linux CPU number space.

Previously the older NUMA setup code directly parsing the K8
northbridge registers had some issues on 8 socket or dual core
systems. This patch fixes them.

This is mainly done by fixing some confusion between Linux
CPU numbers and local APIC ids. We now pass the local APIC IDs
to later code, which avoids mismatches.

Also add some heuristics to detect cases where the Hypertransport
nodeids and the local APIC IDs don't match, but are shifted
by a constant offset.

This is still all quite hackish, hopefully BIOS writers fill
in correct SRATs instead.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Don't cache align PDA on UP builds
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Don't cache align PDA on UP builds

Suggested by someone I forgot who sorry.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Fix the apic version that gets printed during boot
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Fix the apic version that gets printed during boot

Signed-off-by: Suresh Sidda <suresh.b.siddha@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Don't assign CPU numbers in SRAT parsing
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Don't assign CPU numbers in SRAT parsing

Do that later when the CPU boots. SRAT just stores the APIC<->Node
mapping node. This fixes problems on systems where the order
of SRAT entries does not match the MADT.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: White space and comment fixes for smp_call_function_single
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: White space and comment fixes for smp_call_function_single

No functional changes

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Enable interrupts during delay calibration on APs
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Enable interrupts during delay calibration on APs

We used to disable them to work around a bug, but that
is not needed anymore. Keeping them enabled avoids the NMI
watchdog triggering in some cases.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86-64: Use largest APIC number, not number of CPUs to decide on physflat...
Andi Kleen [Mon, 12 Sep 2005 16:49:24 +0000 (18:49 +0200)]
[PATCH] x86-64: Use largest APIC number, not number of CPUs to decide on physflat mode

Handles case where BIOS gives CPUs very large APIC numbers correctly.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>