Ville Syrjälä [Fri, 27 Mar 2015 13:51:58 +0000 (15:51 +0200)]
drm: Simplify core vs. drv ioctl handling
Now that cmd_drv is gone the handling for core and driver ioctls is
mostly identical, so eliminate the duplication. Also take the
opportunity to simplify the range checks to be less cluttered.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 27 Mar 2015 13:51:56 +0000 (15:51 +0200)]
drm: Drop ioctl->cmd_drv
ioctl->cmd_drv is pointless and we can just as well stick the full ioctl
definition into ioctl->cmd.
Cc: Jakob Bornecrantz <jakob@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 27 Mar 2015 13:51:55 +0000 (15:51 +0200)]
drm: Fix DRM_IOCTL_DEF_DRV()
Currently DRM_IOCTL_DEF_DRV does '[DRM_IOCTL_NR(DRM_##ioctl)]' which
doesn't make much sense since DRM_##ioctl is already a the raw ioctl
number. So change it to 'DRM_IOCTL_NR(DRM_IOCTL_##ioctl) - DRM_COMMAND_BASE'
which means the DRM_IOCTL_NR() now makes sense, and also this also means
if there's a mistake in the DRM_IOCTL_##ioctl macros we might get a
warning about it (eg. we would have gotten a sparse warning about the
i915 colorkey get/set ioctl being defined to be the same thing).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 26 Mar 2015 21:18:40 +0000 (22:18 +0100)]
drm/atomic-helpers: Properly avoid full modeset dance
Legacy setCrtc has a nice fastpath for just updating the frontbuffer
when the output routing doesn't change. Which I of course tried to
keep working, except that I fumbled the job: The helpers correctly
compute ->mode_changed, CRTC updates get correctly skipped but
connector functions are called unconditionally.
Fix this.
v2: For the disable sided connector->state->crtc might be NULL.
Instead look at the old_connector_state->crtc, but still use the new
crtc state for that old crtc. Reported by Thierry.
Reported-and-Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (v1)
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Stone [Thu, 19 Mar 2015 04:33:26 +0000 (04:33 +0000)]
drm: atomic: Allow setting CRTC active property
Before, we would set the property, but also return -EINVAL because of a
broken fallthrough.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Stone [Thu, 19 Mar 2015 04:33:25 +0000 (04:33 +0000)]
drm: atomic: Expose CRTC active property
Active was here, and we allowed users to set it, but not to get it as
well.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Stone [Thu, 19 Mar 2015 04:33:03 +0000 (04:33 +0000)]
drm: crtc_helper: Update hwmode before mode_set call
Just as we provide crtc->mode pre-populated with the requested mode,
move adjusted_mode into hwmode before we call the crtc's mode_set,
making sure to restore it on failure.
Allows drivers which thoughtlessly discard adjusted_mode in their
mode_set hooks (e.g. Exynos) to use hwmode directly, and also provides
some neat symmetry with crtc->mode.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Stone [Thu, 19 Mar 2015 04:33:02 +0000 (04:33 +0000)]
drm: mode: Allow NULL modes for equality check
Since we're now using mode == NULL to represent disabled, it's not
wholly surprising that we'd want to compare NULL modes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Stone [Thu, 19 Mar 2015 04:33:01 +0000 (04:33 +0000)]
drm: fb_helper: Simplify exit condition
mode is always NULL at this point in the function, so make our intention
clear.
Signed-off-by: Daniel Stone <daniels@collabora.com>
[danvet: Stop clearing mode too to enlist gcc in tracking
uninitialized usage. And remove a space while at it.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Stone [Thu, 19 Mar 2015 04:33:00 +0000 (04:33 +0000)]
drm: mode: Fix typo in kerneldoc
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 19 Mar 2015 11:38:57 +0000 (13:38 +0200)]
drm/dp: Print the number of bytes processed for aux nacks
When doing a native or i2c aux write the sink will indicate the number
of bytes written even if it the nacks the transfer. When we receive a
nack we just return an error upwards, but it might still be interesting
to see how many bytes made it before the nack. So include that information
in the debug messages.
v2: Also print the message size (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Sun, 22 Mar 2015 23:34:32 +0000 (09:34 +1000)]
Merge branch 'drm/next/rcar-du' of git://linuxtv.org/pinchartl/fbdev into drm-next
rcar-du fixes
* 'drm/next/rcar-du' of git://linuxtv.org/pinchartl/fbdev:
drm: rcar-du: Enable the atomic updates API
drm: rcar-du: Don't initialize event->pipe field
drm: rcar-du: Fix framebuffer reference leak through plane state
MAINTAINERS: Remove rcar-du.h entry
Dave Airlie [Sun, 22 Mar 2015 23:34:08 +0000 (09:34 +1000)]
Merge branch 'drm/next/adv7511' of git://linuxtv.org/pinchartl/fbdev into drm-next
adv7511 fixes.
* 'drm/next/adv7511' of git://linuxtv.org/pinchartl/fbdev:
drm: adv7511: Refactor power management
drm: adv7511: Fix nested sleep when reading EDID
drm: adv7511: Fix DDC error interrupt handling
Dave Airlie [Sun, 22 Mar 2015 23:15:02 +0000 (09:15 +1000)]
Merge branch 'drm-next-4.1' of git://people.freedesktop.org/~agd5f/linux into drm-next
- DP MST support (disabled by default)
- non-ATOM aux support (DCE5+)
- output csc support for clamped RGB
- Lots of new queries for profiling, Gallium HUD, etc.
- Misc fixes
* 'drm-next-4.1' of git://people.freedesktop.org/~agd5f/linux: (40 commits)
drm/radeon: add DisplayPort MST support (v2)
drm/radeon: improve encoder picking functions (v2)
drm/radeon: export max link rate calculation
drm/radeon: add new atombios encoder/transmitter interfaces
drm/radeon: add some MST registers
radeon/fb: add wrapper functions around fb connector add/remove
radeon/cik: add support for short HPD irqs
radeon/si: add support for short HPD irqs
radeon/evergreen: add support for short HPD irqs
radeon: introduce a dp_work handler
drm/dp_mst: add a function to retrieve vcpi slots
drm/radeon: program auxch directly (v2)
drm/radeon: fix doublescan modes (v2)
drm/radeon: typo in parameter description
drm/radeon: add support for read reg query from radeon info ioctl
drm/radeon: add get_allowed_info_register for CIK
drm/radeon: add get_allowed_info_register for SI
drm/radeon: add get_allowed_info_register for cayman/TN
drm/radeon: add get_allowed_info_register for EG/BTC
drm/radeon: add get_allowed_info_register for r6xx/r7xx
...
Dave Airlie [Mon, 23 Feb 2015 23:24:04 +0000 (09:24 +1000)]
drm/radeon: add DisplayPort MST support (v2)
This adds initial DP 1.2 MST support to radeon, on CAYMAN
and up in theory.
This is off by default.
v2: agd5f:
- add UNIPHY3 offsets
- move atom cmd table code into atombios_encoders.c
- whitespace cleanup
- replace some magic numbers with proper defines
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 23 Feb 2015 23:24:03 +0000 (09:24 +1000)]
drm/radeon: improve encoder picking functions (v2)
For MST we need to be able to pick front end encoders
separate from backend, but only for MST, so we need to
make the encoder picking interface smarter.
v2: agd5f: squash in:
drm/radeon: release digital encoder before asking for new one
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 23 Feb 2015 23:24:02 +0000 (09:24 +1000)]
drm/radeon: export max link rate calculation
We need this in the MST code later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 23 Feb 2015 23:24:01 +0000 (09:24 +1000)]
drm/radeon: add new atombios encoder/transmitter interfaces
These allow overriding the encoder id with the frontend,
we need this for setting up MST.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 23 Feb 2015 23:24:00 +0000 (09:24 +1000)]
drm/radeon: add some MST registers
These registers will be used later to setup
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 23 Feb 2015 23:23:59 +0000 (09:23 +1000)]
radeon/fb: add wrapper functions around fb connector add/remove
These are just two wrappers to be used in the MST code later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 24 Feb 2015 17:38:42 +0000 (12:38 -0500)]
radeon/cik: add support for short HPD irqs
This adds support to process short HPD irqs on CIK gpus.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 23 Feb 2015 23:23:58 +0000 (09:23 +1000)]
radeon/si: add support for short HPD irqs
This adds support to process short HPD irqs on SI gpus.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 23 Feb 2015 23:23:57 +0000 (09:23 +1000)]
radeon/evergreen: add support for short HPD irqs
This adds support for processing short irqs, and triggering
the dp_work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 23 Feb 2015 23:23:56 +0000 (09:23 +1000)]
radeon: introduce a dp_work handler
This is to be called on short HPD irqs, just introduce
the basic infrastructure for it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Mon, 23 Feb 2015 23:23:55 +0000 (09:23 +1000)]
drm/dp_mst: add a function to retrieve vcpi slots
radeon requires this to get the slots for later filling
out a table on every transition.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 19 Feb 2015 23:21:36 +0000 (09:21 +1000)]
drm/radeon: program auxch directly (v2)
The atombios tables have an unfortunate restriction on only
being able to write 12 bytes, MST really wants 16-bytes here,
and since the hw can do it, we should just write directly to it.
This uses a module option to allow for it now, and maybe
we should provide the old code as a fallback for a while.
v2: (agd5f)
- move registers to a proper register header
- only enable on DCE5+
- enable by default on DCE5+
- Switch pad to aux mode before using it
- reformat instance handling to better match the
rest of the driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 24 Feb 2015 16:29:21 +0000 (11:29 -0500)]
drm/radeon: fix doublescan modes (v2)
Use the correct flags for atom.
v2: handle DRM_MODE_FLAG_DBLCLK
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Vincent Batts [Fri, 6 Mar 2015 21:07:05 +0000 (21:07 +0000)]
drm/radeon: typo in parameter description
"defaul" -> "default"
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 1 Oct 2014 15:26:50 +0000 (11:26 -0400)]
drm/radeon: add support for read reg query from radeon info ioctl
This allows us to query certain registers from userspace
for profiling and harvest configuration. E.g., it can
be used by the GALLIUM_HUD for profiling the status of
various gfx blocks.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 1 Oct 2014 15:18:46 +0000 (11:18 -0400)]
drm/radeon: add get_allowed_info_register for CIK
Registers that can be fetched from the info ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 1 Oct 2014 14:03:31 +0000 (10:03 -0400)]
drm/radeon: add get_allowed_info_register for SI
Registers that can be fetched from the info ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 1 Oct 2014 13:51:29 +0000 (09:51 -0400)]
drm/radeon: add get_allowed_info_register for cayman/TN
Registers that can be fetched from the info ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 1 Oct 2014 13:43:38 +0000 (09:43 -0400)]
drm/radeon: add get_allowed_info_register for EG/BTC
Registers that can be fetched from the info ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 1 Oct 2014 13:36:57 +0000 (09:36 -0400)]
drm/radeon: add get_allowed_info_register for r6xx/r7xx
Registers that can be fetched from the info ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 1 Oct 2014 13:25:27 +0000 (09:25 -0400)]
drm/radeon: add get_allowed_info_register function for r1xx-r5xx
Just a stub.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 1 Oct 2014 13:17:12 +0000 (09:17 -0400)]
drm/radeon: add new callback for info ioctl register accessor
This adds a callback for each asic family to determine what
registers are allowed to be read back via the info ioctl.
The idea here is to allow usermode to query things like GPU status
registers or GPU harvest registers for profiling and determining
the gfx config.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 15:33:30 +0000 (11:33 -0400)]
drm/radeon: add INFO query for current sclk/mclk
Allow the UMDs to query the current sclk/mclk
for profiling, etc.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 15:21:23 +0000 (11:21 -0400)]
drm/radeon/kv: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 15:01:59 +0000 (11:01 -0400)]
drm/radeon/tn: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:58:22 +0000 (10:58 -0400)]
drm/radeon/sumo: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:54:05 +0000 (10:54 -0400)]
drm/radeon/ci: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:50:07 +0000 (10:50 -0400)]
drm/radeon/si: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:46:02 +0000 (10:46 -0400)]
drm/radeon/ni: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:41:15 +0000 (10:41 -0400)]
drm/radeon: remove some rv7xx leftovers from btc dpm code
Some copy paste leftovers. No functional change.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:39:30 +0000 (10:39 -0400)]
drm/radeon/btc: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:34:39 +0000 (10:34 -0400)]
drm/radeon/rv7xx/eg: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:27:42 +0000 (10:27 -0400)]
drm/radeon/rv6xx: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:19:57 +0000 (10:19 -0400)]
drm/radeon/rs780: implement get_current_sclk/mclk
Will be used for exposing current clocks via INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:12:17 +0000 (10:12 -0400)]
drm/radeon/dpm: add new callbacks to get the current sclk/mclk
Needed to to expose the current clocks via the INFO ioctl.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 30 Sep 2014 14:04:40 +0000 (10:04 -0400)]
drm/radeon: add INFO query for GPU temperature
Useful for profiling.
Tested-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Maarten Lankhorst [Tue, 13 Jan 2015 08:40:13 +0000 (09:40 +0100)]
drm/radeon: dont switch vt on suspend
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 23 Feb 2015 22:14:47 +0000 (17:14 -0500)]
drm/radeon: setup quantization_range in AVI infoframe
If the display supports selectable range, set the range
based on what the user has selected for output csc.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83226
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 23 Feb 2015 15:59:36 +0000 (10:59 -0500)]
drm/radeon: implement output csc property for DCE5+
Implement the property for DCE5+ asics. Older asics
require a slightly more complex process.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83226
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 23 Feb 2015 15:11:49 +0000 (10:11 -0500)]
drm/radeon: add an output_csc property
This adds the drm property for output csc (e.g.,
transform of output display colorspace). Currently
only common ones (TV RGB, BT.601, BT.709) are supported,
but bypass and tv rgb are really the only useful ones at
the moment. Additionally we could expose a user adjustable
matrix in the future.
This commit just adds the property. The hw support will
be added in subsequent patches.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83226
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Laurent Pinchart [Mon, 2 Mar 2015 12:38:52 +0000 (14:38 +0200)]
drm: adv7511: Refactor power management
Remove the internal dependency on DPMS mode for power management by
using a by a powered state boolean instead, and use the new power off
handler at probe time. This ensure that the regmap cache is properly
marked as dirty when the device is probed, and the registers properly
synced during the first power up.
As a side effect this removes the initialization of current_edid_segment
at probe time, as the field will be initialized when the device is
powered on, at the latest right before reading EDID data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Christian Kohn <christian.kohn@xilinx.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Laurent Pinchart [Wed, 18 Feb 2015 13:19:33 +0000 (15:19 +0200)]
drm: adv7511: Fix nested sleep when reading EDID
The EDID read code waits for the read completion interrupt to occur
using wait_event_interruptible(). The condition passed to the macro
reads I2C registers. This results in sleeping with the task state set
to TASK_INTERRUPTIBLE, triggering a WARN_ON() introduced in commit
8eb23b9f35aae ("sched: Debug nested sleeps").
Fix this by reworking the EDID read code. Instead of checking whether
the read is complete through I2C reads, handle the interrupt registers
in the interrupt handler and update a new edid_read flag accordingly. As
a side effect both the IRQ and polling code paths now process the
interrupt sources through the same code path, simplifying the code.
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Wed, 18 Feb 2015 13:19:33 +0000 (15:19 +0200)]
drm: adv7511: Fix DDC error interrupt handling
The DDC error interrupt bit is located in REG_INT1, not REG_INT0. Update
both the interrupt wait code and the interrupt sources reset code
accordingly.
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 26 Feb 2015 19:22:10 +0000 (21:22 +0200)]
drm: rcar-du: Enable the atomic updates API
Set the DRIVER_ATOMIC flag to enable usage of the atomic updates API
with the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 5 Mar 2015 21:46:22 +0000 (23:46 +0200)]
drm: rcar-du: Don't initialize event->pipe field
The field is set by drm_send_vblank_event(), there's no need to
preinitialize it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 5 Mar 2015 17:41:04 +0000 (19:41 +0200)]
drm: rcar-du: Fix framebuffer reference leak through plane state
Plane state duplication takes a reference to the framebuffer stored in
the state, but state destroy doesn't release it. This causes a reference
leak. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Joe Perches [Sun, 8 Mar 2015 19:15:56 +0000 (12:15 -0700)]
MAINTAINERS: Remove rcar-du.h entry
commit
2378ad1228d2 ("drm: rcar-du: Remove platform data support")
removed the file, remove the pattern.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Dave Airlie [Thu, 19 Mar 2015 04:05:53 +0000 (14:05 +1000)]
Merge branch 'drm_next' of https://github.com/markyzq/kernel-drm-rockchip into drm-next
rockchip fixes.
* 'drm_next' of https://github.com/markyzq/kernel-drm-rockchip:
drm/rockchip: vop: power off until vop standby take effect
drm/rockchip: vop: set vop enabled after enable iommu
drm/rockchip: vop use is_enabled instead of dpms mode
drm/rockchip: vop: fix vop vsync/hsync polarity
drm/rockchip: Only alloc a kmap for fbdev gem object
Dave Airlie [Thu, 19 Mar 2015 04:03:39 +0000 (14:03 +1000)]
Merge tag 'topic/drm-misc-2015-03-18' of git://anongit.freedesktop.org/drm-intel into drm-next
Another drm-misch pull request. Mostly the fbdev sizes deconfusion series
from Rob, everything else is small stuff all over. And the large i2c over
aux transfers patch, too.
* tag 'topic/drm-misc-2015-03-18' of git://anongit.freedesktop.org/drm-intel:
drm: check that planes types are correct while initializing CRTC
drm: change connector to tmp_connector
drm: Fix some typo mistake of the annotations
drm: Silence sparse warnings
drm: %pF is only for function pointers
drm/fb: handle tiled connectors better
drm/fb: small cleanup
drm/rockchip: use correct fb width/height
drm/exynos: use correct fb width/height
drm/cma: use correct fb width/height
drm/atomic: minor kerneldoc typo fix
drm/fb: document drm_fb_helper_surface_size
drm/dp: Use large transactions for I2C over AUX
drm/plane-helper: Fixup mismerge
drm/atomic: Constify a bunch of functions pointer structs
Benjamin Gaignard [Tue, 17 Mar 2015 11:05:29 +0000 (12:05 +0100)]
drm: check that planes types are correct while initializing CRTC
Be warned if primary or cursor planes haven't the correct type
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
John Hunter [Tue, 17 Mar 2015 07:30:28 +0000 (15:30 +0800)]
drm: change connector to tmp_connector
This wasn't too harmful since we already look at connector,
which has the same effect as the loop for any non-cloned configs.
Only when we have a cloned configuration is it important to look
at other connectors. Furthermore existing userspace always changes
dpms on all of them anyway.
Signed-off-by: JohnHunter <zhjwpku@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
John Hunter [Tue, 17 Mar 2015 07:30:26 +0000 (15:30 +0800)]
drm: Fix some typo mistake of the annotations
There are some mistakes that the function name in the annotaions
is not matching the real function name.
And some duplication word in annotations
Signed-off-by: John Hunter <zhjwpku@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mark Yao [Wed, 4 Feb 2015 05:10:31 +0000 (13:10 +0800)]
drm/rockchip: vop: power off until vop standby take effect
Vop standby will take effect at end of current frame,
if dsp_hold_valid_irq happen, it means vop standby complete.
we must wait standby complete when we want to disable aclk,
if not, memory bus maybe dead.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Mark Yao [Thu, 22 Jan 2015 10:29:57 +0000 (18:29 +0800)]
drm/rockchip: vop: set vop enabled after enable iommu
there is a Bug that:
vop_enable()->drm_vblank_on, drm_vblank_on may call vop
enable vblank. if it happen, vblank enable would failed,
then cause irq status error. because is_enabled value is set
after drm_vblank_on.
after enable vop clocks and iommu regs, we can sure that
R/W vop regs and do vop plane flip is safe, so place
is_enabled = true after enable iommu is suitable.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Mark Yao [Thu, 22 Jan 2015 06:37:56 +0000 (14:37 +0800)]
drm/rockchip: vop use is_enabled instead of dpms mode
drm dpms have many power modes: ON,OFF,SUSPEND,STANDBY, etc.
but vop only have enable/disable mode, maybe case such bug:
--> DRM_DPMS_ON: power on vop
--> DRM_DPMS_SUSPEND: power off vop
--> DRM_DPMS_OFF: already power off at SUSPEND, crash
so use a bool val is more suitable.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Mark Yao [Thu, 22 Jan 2015 03:15:02 +0000 (11:15 +0800)]
drm/rockchip: vop: fix vop vsync/hsync polarity
Vop set wrong vsync/hsync polarity, it may cause some
display problem. known problem is that caused HDMI hdcp
authenticate failed, caused pixel offset with hdmi display.
the polarity description at RK3288 TRM doc:
dsp_vsync_pol
VSYNC polarity
1'b0 : negative
1'b1 : positive
dsp_hsync_pol
HSYNC polarity
1'b0 : negative
1'b1 : positive
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Daniel Kurtz [Mon, 12 Jan 2015 06:58:23 +0000 (14:58 +0800)]
drm/rockchip: Only alloc a kmap for fbdev gem object
In general, the data in drm/rockchip GEM objects is never accessed by
the kernel. The objects are either accessed by a GPU, by display
controller DMA, or by mmap'ing them to user space. Thus, these
buffers need not be mapped into kernel address space.
The only exception is the fbdev framebuffer(s), which may be written
in-kernel by fbcon.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Ville Syrjälä [Fri, 13 Mar 2015 12:51:25 +0000 (14:51 +0200)]
drm: Silence sparse warnings
../drivers/gpu/drm/drm_vm.c:405:6: warning: symbol 'drm_vm_open_locked' was not declared. Should it be static?
../drivers/gpu/drm/drm_vm.c:431:6: warning: symbol 'drm_vm_close_locked' was not declared. Should it be static?
../drivers/gpu/drm/drm_vm.c:681:5: warning: symbol 'drm_vma_info' was not declared. Should it be static?
../drivers/gpu/drm/drm_pci.c:146:5: warning: symbol 'drm_pci_set_unique' was not declared. Should it be static?
../drivers/gpu/drm/drm_pci.c:216:5: warning: symbol 'drm_irq_by_busid' was not declared. Should it be static?
../drivers/gpu/drm/drm_info.c:47:5: warning: symbol 'drm_name_info' was not declared. Should it be static?
../drivers/gpu/drm/drm_info.c:72:5: warning: symbol 'drm_vm_info' was not declared. Should it be static?
../drivers/gpu/drm/drm_info.c:116:5: warning: symbol 'drm_bufs_info' was not declared. Should it be static?
../drivers/gpu/drm/drm_info.c:159:5: warning: symbol 'drm_clients_info' was not declared. Should it be static?
../drivers/gpu/drm/drm_info.c:209:5: warning: symbol 'drm_gem_name_info' was not declared. Should it be static?
../drivers/gpu/drm/drm_ioc32.c:1019:20: warning: symbol 'drm_compat_ioctls' was not declared. Should it be static?
../drivers/gpu/drm/drm_bridge.c:52:12: warning: function 'drm_bridge_attach' with external linkage has definition
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Scott Wood [Thu, 12 Mar 2015 03:13:50 +0000 (22:13 -0500)]
drm: %pF is only for function pointers
Use %pS for actual addresses, otherwise you'll get bad output
on arches like ppc64 where %pF expects a function descriptor.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Wed, 11 Mar 2015 14:23:14 +0000 (10:23 -0400)]
drm/fb: handle tiled connectors better
We don't want tile 0,0 to artificially constrain the size of the legacy
fbdev device. Instead when reducing fb_size to be the minimum of all
displays, only consider the rightmost and bottommost tiles.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Hai Li <hali@codeaurora.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Wed, 11 Mar 2015 14:23:13 +0000 (10:23 -0400)]
drm/fb: small cleanup
Flip conditional to reduce indentation level of rest of fxn, and use
min/max to make the code clearer.
v2: surface_width -> surface_height typo
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Wed, 11 Mar 2015 14:23:12 +0000 (10:23 -0400)]
drm/rockchip: use correct fb width/height
What is passed to drm_fb_helper_fill_var() should be fb_width/fb_height,
rather than the surface size.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Wed, 11 Mar 2015 14:23:11 +0000 (10:23 -0400)]
drm/exynos: use correct fb width/height
What is passed to drm_fb_helper_fill_var() should be fb_width/fb_height,
rather than the surface size.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Wed, 11 Mar 2015 14:23:10 +0000 (10:23 -0400)]
drm/cma: use correct fb width/height
What is passed to drm_fb_helper_fill_var() should be fb_width/fb_height,
rather than the surface size.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Wed, 11 Mar 2015 14:23:09 +0000 (10:23 -0400)]
drm/atomic: minor kerneldoc typo fix
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Wed, 11 Mar 2015 14:23:08 +0000 (10:23 -0400)]
drm/fb: document drm_fb_helper_surface_size
There has been some confusion about this struct. Lack of documentation
probably didn't help.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Simon Farnsworth [Tue, 10 Feb 2015 18:38:08 +0000 (18:38 +0000)]
drm/dp: Use large transactions for I2C over AUX
Older DisplayPort to DVI-D Dual Link adapters designed by Bizlink have bugs
in their I2C over AUX implementation (fixed in newer revisions). They work
fine with Windows, but fail with Linux.
It turns out that they cannot keep an I2C transaction open unless the
previous read was 16 bytes; shorter reads can only be followed by a zero
byte transfer ending the I2C transaction.
Copy Windows's behaviour, and read 16 bytes at a time. If we get a short
reply, assume that there's a hardware bottleneck, and shrink our read size
to match. For this purpose, use the algorithm in the DisplayPort 1.2 spec,
in the hopes that it'll be closest to what Windows does.
Also provide an unsafe module parameter for testing smaller transfer sizes,
in case there are sinks out there that cannot work with Windows.
Note also that despite the previous comment in drm_dp_i2c_xfer, this speeds
up native DP EDID reads; Ville Syrjälä <ville.syrjala@linux.intel.com> found
the following changes in his testing:
Device under test: old -> with this patch
DP->DVI (OUI 001cf8): 40ms -> 35ms
DP->VGA (OUI 0022b9): 45ms -> 38ms
Zotac DP->2xHDMI: 25ms -> 4ms
Asus PB278 monitor: 22ms -> 3ms
A back of the envelope calculation shows that peak theoretical transfer rate
for 1 byte reads is around 60 kbit/s; with 16 byte reads, this increases to
around 500 kbit/s, which explains the increase in speed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55228
Tested-by: Aidan Marks <aidanamarks@gmail.com> (v3)
Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 11 Mar 2015 07:35:47 +0000 (08:35 +0100)]
drm/plane-helper: Fixup mismerge
I somehow manage to screw up applying Laurent's patch in
eca93e28c256:
"drm: Check in setcrtc if the primary plane supports the fb pixel
format". It was a conflict with
commit
3461b30b3e171e16498f3d7bc59ab703aec475c8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Mar 5 10:32:44 2015 +0100
drm/plane-helper: unexport drm_primary_helper_create_plane
and I just didn't check that the solution from wiggle made sense.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: laurent.pinchart@ideasonboard.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: laurent.pinchart@ideasonboard.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Ville Syrjälä [Tue, 10 Mar 2015 12:35:20 +0000 (14:35 +0200)]
drm/atomic: Constify a bunch of functions pointer structs
Make the helper function pointer structs const to make it clear they
should not be modified.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Wed, 11 Mar 2015 02:15:06 +0000 (12:15 +1000)]
Merge tag 'topic/drm-misc-2015-03-10' of git://anongit.freedesktop.org/drm-intel into drm-next
Another pile of misc drm patches all over, mostly polish for atomic. Last
minute rebase was to avoid the broken merge.
* tag 'topic/drm-misc-2015-03-10' of git://anongit.freedesktop.org/drm-intel:
drm: Check in setcrtc if the primary plane supports the fb pixel format
drm: Lighten sysfs connector 'status'
drm/plane-helper: unexport drm_primary_helper_create_plane
drm: Share plane pixel format check code between legacy and atomic
drm: Fix trivial typos in comments
drm/dp: add DPCD definitions from eDP 1.4
drm/dp: add DPCD definitions from DP 1.1 and 1.2a
drm: Fixup racy refcounting in plane_force_disable
drm/i915: Rotation property is now handled in DRM core
drm: Complete moving rotation property to core
drm/dp: add DPCD definitions from eDP 1.2
drm/dp: indentation and ordering cleanups
drm/atomic-helper: Fix kerneldoc for prepare_planes
drm: Remove redundant code in the getencoder ioctl
Laurent Pinchart [Mon, 9 Mar 2015 08:41:07 +0000 (10:41 +0200)]
drm: Check in setcrtc if the primary plane supports the fb pixel format
Drivers implementing the universal planes API report the list of
supported pixel formats for the primary plane. Make sure the fb passed
to the setcrtc ioctl is compatible.
Drivers not implementing the universal planes API will have no format
reported for the primary plane, skip the check in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Fri, 6 Mar 2015 12:36:42 +0000 (12:36 +0000)]
drm: Lighten sysfs connector 'status'
Since the beginning, sysfs/connector/status has done a heavyweight
detection of the current connector status. But no user, such as upowerd
or logind, has ever desired to initiate a probe. Move the probing into a
new attribute so that existing readers get the behaviour they desire.
v2: David Herrmann suggested using "echo detect > /sys/.../status" to
trigger the probing, which is a fine idea. This extends that to also
allow the user to apply the force detection overrides at runtime.
v3: Now with airlied's email address fixed! Requires sysfs_streq()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 5 Mar 2015 09:32:44 +0000 (10:32 +0100)]
drm/plane-helper: unexport drm_primary_helper_create_plane
We shouldn't tempt driver writers into using this since it uses a
default format list which is likely wrong. And when that's done we can
simplify the code a bit, too.
Noticed while reviewing a patch from Laurent.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Laurent Pinchart [Thu, 5 Mar 2015 00:25:43 +0000 (02:25 +0200)]
drm: Share plane pixel format check code between legacy and atomic
Both the legacy and atomic helpers need to check whether a plane
supports a given pixel format. The code is currently duplicated, share
it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[danvet: Slightly extend the docbook.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Yannick Guerrini [Wed, 4 Mar 2015 08:30:09 +0000 (09:30 +0100)]
drm: Fix trivial typos in comments
Change 'pixes' to 'pixels'
Change 'enabel' to 'enable'
Change 'enabeling' to 'enabling'
Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 27 Feb 2015 11:11:14 +0000 (13:11 +0200)]
drm/dp: add DPCD definitions from eDP 1.4
Add a number of DPCD definitions from eDP 1.4.
v2: s/DP_ALPM_LOCK_TIMEOUT_ERROR_STATUS/DP_ALPM_LOCK_TIMEOUT_ERROR/
(Sonika)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Fri, 27 Feb 2015 11:10:38 +0000 (13:10 +0200)]
drm/dp: add DPCD definitions from DP 1.1 and 1.2a
Add a number of DPCD definitions from DP 1.1 and 1.2a.
v2: drop wrong DP version reference, rename DP training set macros
(Sonika).
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 27 Feb 2015 11:58:13 +0000 (12:58 +0100)]
drm: Fixup racy refcounting in plane_force_disable
Originally it was impossible to be dropping the last refcount in this
function since there was always one around still from the idr. But in
commit
83f45fc360c8e16a330474860ebda872d1384c8c
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Aug 6 09:10:18 2014 +0200
drm: Don't grab an fb reference for the idr
we've switched to weak references, broke that assumption but forgot to
fix it up.
Since we still force-disable planes it's only possible to hit this
when racing multiple rmfb with fbdev restoring or similar evil things.
As long as userspace is nice it's impossible to hit the BUG_ON.
But the BUG_ON would most likely be hit from fbdev code, which usually
invovles the console_lock besides all modeset locks. So very likely
we'd never get the bug reports if this was hit in the wild, hence
better be safe than sorry and backport.
Spotted by Matt Roper while reviewing other patches.
Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tvrtko Ursulin [Thu, 26 Feb 2015 13:49:18 +0000 (13:49 +0000)]
drm/i915: Rotation property is now handled in DRM core
So no need to have code which never gets called in the driver.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tvrtko Ursulin [Thu, 26 Feb 2015 13:49:17 +0000 (13:49 +0000)]
drm: Complete moving rotation property to core
Commit
1da30627fc511a57c9bd23a02c97f0576379f761 "drm: Add rotation value to
plane state" moved the rotation property to DRM core but only did the set
property part. This does the get property part as well.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 25 Feb 2015 12:46:53 +0000 (14:46 +0200)]
drm/dp: add DPCD definitions from eDP 1.2
Mostly display control related DPCD addresses.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Wed, 25 Feb 2015 12:46:51 +0000 (14:46 +0200)]
drm/dp: indentation and ordering cleanups
Keep the DPCD macros ordered by address, and make indentation conform to
the rest of the file.
commit
e045d20bef41707dbba676e58624b54f9f39e172
Author: Sonika Jindal <sonika.jindal@intel.com>
Date: Thu Feb 19 13:16:44 2015 +0530
drm: Adding edp1.4 specific dpcd macros
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 26 Feb 2015 13:17:38 +0000 (14:17 +0100)]
drm/atomic-helper: Fix kerneldoc for prepare_planes
Copypaste-fail from cleanup_planes. Reported by Tvrtko.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Wed, 25 Feb 2015 16:52:05 +0000 (17:52 +0100)]
drm: Remove redundant code in the getencoder ioctl
When enabling atomic state object for this ioctl in
commit
abd69c55dd8f1f71b33b8c6165217f4329db8f25
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Nov 25 23:50:05 2014 +0100
drm: Handle atomic state properly in kms getfoo ioctl
I've forgotten to remove this hunk in one of the later revisions.
drm_encoder_get_crtc already does this.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Ville Syrjälä [Mon, 9 Mar 2015 19:08:37 +0000 (21:08 +0200)]
drm/i915: Fix struct_mutex deadlock due to merge fumble
commit
a8c6ecb3be7029881f7c95e5e201a629094a4e1a
Merge:
8dd0eb35 9eccca0
Author: Dave Airlie <airlied@redhat.com>
Date: Mon Mar 9 19:58:30 2015 +1000
Merge tag 'v4.0-rc3' into drm-next
managed to pick the wrong code to resolve the conflict and left us with
a mutex_lock(struct_mutex) without the mutex_unlock(struct_mutex) leading
to a deadlock. Fix the problem by recovering the correct code which doesn't
need the lock.
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 9 Mar 2015 09:58:30 +0000 (19:58 +1000)]
Merge tag 'v4.0-rc3' into drm-next
Linux 4.0-rc3 backmerge to fix two i915 conflicts, and get
some mainline bug fixes needed for my testing box
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/intel_display.c
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log