GitHub/exynos8895/android_kernel_samsung_universal8895.git
13 years ago[media] omap3: Remove unusued ISP CBUFF resource
Sergio Aguirre [Mon, 15 Nov 2010 14:29:56 +0000 (11:29 -0300)]
[media] omap3: Remove unusued ISP CBUFF resource

The ISP CBUFF module isn't use, its resource isn't needed.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ARM: OMAP3: Update Camera ISP definitions for OMAP3630
Tuukka Toivonen [Tue, 2 Feb 2010 14:17:33 +0000 (11:17 -0300)]
[media] ARM: OMAP3: Update Camera ISP definitions for OMAP3630

Add new/changed base address definitions and resources for
OMAP3630 ISP.

The OMAP3430 CSI2PHY block is same as the OMAP3630 CSIPHY2
block. But the later name is chosen as it gives more symmetry
to the names.

Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Add 12 bits bayer pixel formats
Laurent Pinchart [Thu, 23 Dec 2010 14:14:50 +0000 (11:14 -0300)]
[media] v4l: Add 12 bits bayer pixel formats

Add FCCs for the following pixel formats:

- V4L2_PIX_FMT_SBGGR12
- V4L2_PIX_FMT_SGBRG12
- V4L2_PIX_FMT_SGRBG12
- V4L2_PIX_FMT_SRGGB12

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Add missing 12 bits bayer media bus formats
Laurent Pinchart [Thu, 23 Dec 2010 14:14:49 +0000 (11:14 -0300)]
[media] v4l: Add missing 12 bits bayer media bus formats

Add codes and documentation for the following media bus formats:

- V4L2_MBUS_FMT_SGBRG12_1X12
- V4L2_MBUS_FMT_SGRBG12_1X12
- V4L2_MBUS_FMT_SRGGB12_1X12

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Add remaining RAW10 patterns w DPCM pixel code variants
Laurent Pinchart [Fri, 3 Sep 2010 08:47:25 +0000 (05:47 -0300)]
[media] v4l: Add remaining RAW10 patterns w DPCM pixel code variants

This adds following formats:
- V4L2_MBUS_FMT_SRGGB10_1X10
- V4L2_MBUS_FMT_SGBRG10_1X10
- V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8
- V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8
- V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Add 8-bit YUYV on 16-bit bus and SGRBG10 media bus pixel codes
Laurent Pinchart [Wed, 1 Sep 2010 15:59:36 +0000 (12:59 -0300)]
[media] v4l: Add 8-bit YUYV on 16-bit bus and SGRBG10 media bus pixel codes

Add the following media bus format code definitions:

- V4L2_MBUS_FMT_SGRBG10_1X10 for 10-bit GRBG Bayer
- V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 for 10-bit DPCM compressed GRBG Bayer
- V4L2_MBUS_FMT_YUYV16_1X16 for 8-bit YUYV on 16-bit bus
- V4L2_MBUS_FMT_UYVY16_1X16 for 8-bit UYVY on 16-bit bus
- V4L2_MBUS_FMT_YVYU16_1X16 for 8-bit YVYU on 16-bit bus
- V4L2_MBUS_FMT_VYUY16_1X16 for 8-bit VYUY on 16-bit bus

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Add subdev sensor g_skip_frames operation
Laurent Pinchart [Tue, 16 Nov 2010 04:21:06 +0000 (01:21 -0300)]
[media] v4l: Add subdev sensor g_skip_frames operation

Some buggy sensors generate corrupt frames when the stream is started.
This new operation return the number of corrupt frames to skip when
starting the stream.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: v4l2_subdev userspace crop API
Antti Koskipaa [Wed, 23 Jun 2010 08:03:42 +0000 (05:03 -0300)]
[media] v4l: v4l2_subdev userspace crop API

This patch adds the VIDIOC_SUBDEV_S_CROP and G_CROP ioctls to the
userland API. CROPCAP is not implemented because it's redundant.

Signed-off-by: Antti Koskipaa <akoskipa@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: v4l2_subdev userspace frame interval API
Laurent Pinchart [Wed, 5 May 2010 14:38:35 +0000 (11:38 -0300)]
[media] v4l: v4l2_subdev userspace frame interval API

The three new ioctl VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL,
VIDIOC_SUBDEV_G_FRAME_INTERVAL and VIDIOC_SUBDEV_S_FRAME_INTERVAL can be
used to enumerate and configure a subdev's frame rate from userspace.

Two new video::g/s_frame_interval subdev operations are introduced to
support those ioctls. The existing video::g/s_parm operations are
deprecated and shouldn't be used anymore.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: v4l2_subdev userspace format API
Laurent Pinchart [Mon, 15 Mar 2010 23:26:04 +0000 (20:26 -0300)]
[media] v4l: v4l2_subdev userspace format API

Add a userspace API to get, set and enumerate the media format on a
subdev pad.

The format at the output of a subdev usually depends on the format at
its input(s). The try format operation is thus not suitable for probing
format at individual pads, as it can't modify the device state and thus
can't remember the format tried at the input to compute the output
format.

To fix the problem, pass an extra argument to the get/set format
operations to select the 'try' or 'active' format.

The try format is used when probing the subdev. Setting the try format
must not change the device configuration but can store data for later
reuse. Data storage is provided at the file-handle level so applications
probing the subdev concurently won't interfere with each other.

The active format is used when configuring the subdev. It's identical to
the format handled by the usual get/set operations.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: v4l2_subdev userspace format API - documentation binary files
Laurent Pinchart [Mon, 15 Mar 2010 23:26:04 +0000 (00:26 +0100)]
[media] v4l: v4l2_subdev userspace format API - documentation binary files

Add images used by the V4L2 subdev userspace format API documentation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: v4l2_subdev pad-level operations
Laurent Pinchart [Wed, 9 Dec 2009 11:39:52 +0000 (08:39 -0300)]
[media] v4l: v4l2_subdev pad-level operations

Add a v4l2_subdev_pad_ops structure for the operations that need to be
performed at the pad level such as format-related operations.

Pad format-related operations use v4l2_mbus_framefmt instead of
v4l2_format.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: subdev: Add new file operations
Laurent Pinchart [Sun, 1 Aug 2010 22:05:09 +0000 (19:05 -0300)]
[media] v4l: subdev: Add new file operations

V4L2 sub-devices store pad formats and crop settings in the file handle.
To let drivers initialize those settings properly, add an open operation
that is called when the subdev is opened as well as a corresponding
close operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Create v4l2 subdev file handle structure
Stanimir Varbanov [Fri, 21 May 2010 09:04:24 +0000 (06:04 -0300)]
[media] v4l: Create v4l2 subdev file handle structure

Used for storing subdev information per file handle and hold V4L2 file
handle.

Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Antti Koskipaa <akoskipa@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Group media bus pixel codes by types and sort them alphabetically
Laurent Pinchart [Wed, 1 Sep 2010 15:58:22 +0000 (12:58 -0300)]
[media] v4l: Group media bus pixel codes by types and sort them alphabetically

Adding new pixel codes at the end of the enumeration will soon create a
mess, so group the pixel codes by type and sort them by bus_width, bits
per component, samples per pixel and order of subsamples.

As the codes are part of the kernel ABI their value can't change when a
new code is inserted in the enumeration, so they are given an explicit
numerical value. When inserting a new pixel code developers must use and
update the next free value.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Rename V4L2_MBUS_FMT_GREY8_1X8 to V4L2_MBUS_FMT_Y8_1X8
Laurent Pinchart [Tue, 28 Sep 2010 10:01:44 +0000 (07:01 -0300)]
[media] v4l: Rename V4L2_MBUS_FMT_GREY8_1X8 to V4L2_MBUS_FMT_Y8_1X8

For consistency with the V4L2_MBUS_FMT_Y10_1X10 format.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Replace enums with fixed-sized fields in public structure
Laurent Pinchart [Wed, 6 Oct 2010 06:30:26 +0000 (03:30 -0300)]
[media] v4l: Replace enums with fixed-sized fields in public structure

The v4l2_mbus_framefmt structure will be part of the public userspace
API and used (albeit indirectly) as an ioctl argument. As such, its size
must be fixed across userspace ABIs.

Replace the v4l2_field and v4l2_colorspace enums by __u32 fields and add
padding for future enhancements.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Move the media/v4l2-mediabus.h header to include/linux
Laurent Pinchart [Mon, 15 Mar 2010 22:33:31 +0000 (19:33 -0300)]
[media] v4l: Move the media/v4l2-mediabus.h header to include/linux

The header defines the v4l2_mbus_framefmt structure which will be used
by the V4L2 subdevs userspace API.

Change the type of the v4l2_mbus_framefmt::code field to __u32, as enum
sizes can differ between different ABIs on the same architectures.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Make v4l2_subdev inherit from media_entity
Laurent Pinchart [Wed, 9 Dec 2009 11:40:08 +0000 (08:40 -0300)]
[media] v4l: Make v4l2_subdev inherit from media_entity

V4L2 subdevices are media entities. As such they need to inherit from
(include) the media_entity structure.

When registering/unregistering the subdevice, the media entity is
automatically registered/unregistered. The entity is acquired on device
open and released on device close.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Make video_device inherit from media_entity
Laurent Pinchart [Wed, 9 Dec 2009 11:40:10 +0000 (08:40 -0300)]
[media] v4l: Make video_device inherit from media_entity

V4L2 devices are media entities. As such they need to inherit from
(include) the media_entity structure.

When registering/unregistering the device, the media entity is
automatically registered/unregistered. The entity is acquired on device
open and released on device close.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Add a media_device pointer to the v4l2_device structure
Laurent Pinchart [Wed, 9 Dec 2009 11:40:05 +0000 (08:40 -0300)]
[media] v4l: Add a media_device pointer to the v4l2_device structure

The pointer will later be used to register/unregister media entities
when registering/unregistering a v4l2_subdev or a video_device.

With the introduction of media devices, device drivers need to store a
pointer to a driver-specific structure in the device's drvdata.
v4l2_device can't claim ownership of the drvdata anymore.

To maintain compatibility with drivers that rely on v4l2_device storing
a pointer to itself in the device's drvdata, v4l2_device_register() will
keep doing so if the drvdata is NULL.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media: Pipelines and media streams
Laurent Pinchart [Wed, 25 Aug 2010 12:00:41 +0000 (09:00 -0300)]
[media] media: Pipelines and media streams

Drivers often need to associate pipeline objects to entities, and to
take stream state into account when configuring entities and links. The
pipeline API helps drivers manage that information.

When starting streaming, drivers call media_entity_pipeline_start(). The
function marks all entities connected to the given entity through
enabled links, either directly or indirectly, as streaming. Similarly,
when stopping the stream, drivers call media_entity_pipeline_stop().

The media_entity_pipeline_start() function takes a pointer to a media
pipeline and stores it in every entity in the graph. Drivers should
embed the media_pipeline structure in higher-level pipeline structures
and can then access the pipeline through the media_entity structure.

Link configuration will fail with -EBUSY by default if either end of the
link is a streaming entity, unless the link is marked with the
MEDIA_LNK_FL_DYNAMIC flag.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media: Links setup
Laurent Pinchart [Wed, 9 Dec 2009 11:40:03 +0000 (08:40 -0300)]
[media] media: Links setup

Create the following ioctl and implement it at the media device level to
setup links.

- MEDIA_IOC_SETUP_LINK: Modify the properties of a given link

The only property that can currently be modified is the ENABLED link
flag to enable/disable a link. Links marked with the IMMUTABLE link flag
can not be enabled or disabled.

Enabling or disabling a link has effects on entities' use count. Those
changes are automatically propagated through the graph.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media: Entities, pads and links enumeration
Laurent Pinchart [Wed, 9 Dec 2009 11:40:01 +0000 (08:40 -0300)]
[media] media: Entities, pads and links enumeration

Create the following two ioctls and implement them at the media device
level to enumerate entities, pads and links.

- MEDIA_IOC_ENUM_ENTITIES: Enumerate entities and their properties
- MEDIA_IOC_ENUM_LINKS: Enumerate all pads and links for a given entity

Entity IDs can be non-contiguous. Userspace applications should
enumerate entities using the MEDIA_ENT_ID_FLAG_NEXT flag. When the flag
is set in the entity ID, the MEDIA_IOC_ENUM_ENTITIES will return the
next entity with an ID bigger than the requested one.

Only forward links that originate at one of the entity's source pads are
returned during the enumeration process.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media: Media device information query
Laurent Pinchart [Wed, 18 Aug 2010 14:41:22 +0000 (11:41 -0300)]
[media] media: Media device information query

Create the following ioctl and implement it at the media device level to
query device information.

- MEDIA_IOC_DEVICE_INFO: Query media device information

The ioctl and its data structure are defined in the new kernel header
linux/media.h available to userspace applications.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media: Entity use count
Laurent Pinchart [Sun, 7 Mar 2010 18:04:59 +0000 (15:04 -0300)]
[media] media: Entity use count

Due to the wide differences between drivers regarding power management
needs, the media controller does not implement power management.
However, the media_entity structure includes a use_count field that
media drivers can use to track the number of users of every entity for
power management needs.

The use_count field is owned by media drivers and must not be touched by
entity drivers. Access to the field must be protected by the media
device graph_mutex lock.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media: Entity graph traversal
Sakari Ailus [Sun, 7 Mar 2010 19:14:14 +0000 (16:14 -0300)]
[media] media: Entity graph traversal

Add media entity graph traversal. The traversal follows enabled links by
depth first. Traversing graph backwards is prevented by comparing the next
possible entity in the graph with the previous one. Multiply connected
graphs are thus not supported.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media: Entities, pads and links
Laurent Pinchart [Wed, 9 Dec 2009 11:40:00 +0000 (08:40 -0300)]
[media] media: Entities, pads and links

As video hardware pipelines become increasingly complex and
configurable, the current hardware description through v4l2 subdevices
reaches its limits. In addition to enumerating and configuring
subdevices, video camera drivers need a way to discover and modify at
runtime how those subdevices are connected. This is done through new
elements called entities, pads and links.

An entity is a basic media hardware building block. It can correspond to
a large variety of logical blocks such as physical hardware devices
(CMOS sensor for instance), logical hardware devices (a building block
in a System-on-Chip image processing pipeline), DMA channels or physical
connectors.

A pad is a connection endpoint through which an entity can interact with
other entities. Data (not restricted to video) produced by an entity
flows from the entity's output to one or more entity inputs. Pads should
not be confused with physical pins at chip boundaries.

A link is a point-to-point oriented connection between two pads, either
on the same entity or on different entities. Data flows from a source
pad to a sink pad.

Links are stored in the source entity. To make backwards graph walk
faster, a copy of all links is also stored in the sink entity. The copy
is known as a backlink and is only used to help graph traversal.

The entity API is made of three functions:

- media_entity_init() initializes an entity. The caller must provide an
array of pads as well as an estimated number of links. The links array
is allocated dynamically and will be reallocated if it grows beyond the
initial estimate.

- media_entity_cleanup() frees resources allocated for an entity. It
must be called during the cleanup phase after unregistering the entity
and before freeing it.

- media_entity_create_link() creates a link between two entities. An
entry in the link array of each entity is allocated and stores pointers
to source and sink pads.

When a media device is unregistered, all its entities are unregistered
automatically.

The code is based on Hans Verkuil <hverkuil@xs4all.nl> initial work.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media: Media device
Laurent Pinchart [Wed, 9 Dec 2009 11:39:58 +0000 (08:39 -0300)]
[media] media: Media device

The media_device structure abstracts functions common to all kind of
media devices (v4l2, dvb, alsa, ...). It manages media entities and
offers a userspace API to discover and configure the media device
internal topology.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media: Media device node support
Laurent Pinchart [Wed, 9 Dec 2009 11:39:56 +0000 (08:39 -0300)]
[media] media: Media device node support

The media_devnode structure provides support for registering and
unregistering character devices using a dynamic major number. Reference
counting is handled internally, making device drivers easier to write
without having to solve the open/disconnect race condition issue over
and over again.

The code is based on video/v4l2-dev.c.

[mchehab@redhat.com: Remove linux/smp_lock.h include to not break compilation on bisect]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: subdev: Events support
Sakari Ailus [Wed, 3 Mar 2010 15:49:38 +0000 (12:49 -0300)]
[media] v4l: subdev: Events support

Provide v4l2_subdevs with v4l2_event support. Subdev drivers only need very
little to support events.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: subdev: Control ioctls support
Laurent Pinchart [Wed, 9 Dec 2009 11:39:54 +0000 (08:39 -0300)]
[media] v4l: subdev: Control ioctls support

Pass the control-related ioctls to the subdev driver through the control
framework.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: subdev: Uninline the v4l2_subdev_init function
Laurent Pinchart [Wed, 9 Dec 2009 11:38:52 +0000 (08:38 -0300)]
[media] v4l: subdev: Uninline the v4l2_subdev_init function

The function isn't small or performance sensitive enough to be inlined.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: subdev: Add device node support
Laurent Pinchart [Wed, 9 Dec 2009 11:38:49 +0000 (08:38 -0300)]
[media] v4l: subdev: Add device node support

Create a device node named subdevX for every registered subdev.

As the device node is registered before the subdev core::s_config
function is called, return -EGAIN on open until initialization
completes.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: subdev: Don't require core operations
Laurent Pinchart [Mon, 31 May 2010 08:33:06 +0000 (05:33 -0300)]
[media] v4l: subdev: Don't require core operations

There's no reason to require subdevices to implement the core
operations. Remove the check for non-NULL core operations when
initializing the subdev.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: Share code between video_usercopy and video_ioctl2
Laurent Pinchart [Mon, 12 Jul 2010 14:09:41 +0000 (11:09 -0300)]
[media] v4l: Share code between video_usercopy and video_ioctl2

The two functions are mostly identical. They handle the copy_from_user
and copy_to_user operations related with V4L2 ioctls and call the real
ioctl handler.

Create a __video_usercopy function that implements the core of
video_usercopy and video_ioctl2, and call that function from both.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] v4l: videobuf2: Typo fix
Laurent Pinchart [Sun, 27 Feb 2011 17:38:19 +0000 (14:38 -0300)]
[media] v4l: videobuf2: Typo fix

vb2_get_plane_payload() gets the bytesused field for a plane, it doesn't
set it.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] drivers:media:cx231xx.h remove one to many l's in the word
Justin P. Mattock [Fri, 25 Feb 2011 06:11:36 +0000 (03:11 -0300)]
[media] drivers:media:cx231xx.h remove one to many l's in the word

The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] drivers:media:cx23418.h remove one to many l's in the word
Justin P. Mattock [Fri, 25 Feb 2011 06:11:17 +0000 (03:11 -0300)]
[media] drivers:media:cx23418.h remove one to many l's in the word

The patch below removes an extra "l" in the word.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] staging/cx25721: serialize access to devlist
Arnd Bergmann [Wed, 2 Mar 2011 20:15:15 +0000 (17:15 -0300)]
[media] staging/cx25721: serialize access to devlist

Out of the three files accessing the device list,
one uses a mutex, one uses the BKL and one does
not have any locking. That is of course pointless,
so let's make all of them use the same mutex,
and get rid of one more BKL user.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] tm6000: add audio conf for new cards
Dmitri Belimov [Tue, 1 Mar 2011 04:55:11 +0000 (01:55 -0300)]
[media] tm6000: add audio conf for new cards

Add configuration of an audio for our new TV cards.

With my best regards, Dmitry.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: prof 1100 corrected
Igor M. Liplianin [Sun, 27 Feb 2011 19:22:52 +0000 (16:22 -0300)]
[media] dw2102: prof 1100 corrected

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: i2c transfer corrected for yet another cards
Igor M. Liplianin [Sun, 27 Feb 2011 19:22:57 +0000 (16:22 -0300)]
[media] dw2102: i2c transfer corrected for yet another cards

Related to Acorp DS120 and some revisions of DVBWorld DW2102.
If you read three or more registers at one time, you get wrong value for third etc.
Actually, it didn't affect the driver as it reads registers only by one at a time.
But it needs to correct.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: i2c transfer corrected for some cards
Igor M. Liplianin [Sun, 27 Feb 2011 19:18:38 +0000 (16:18 -0300)]
[media] dw2102: i2c transfer corrected for some cards

Prof 7500 and TeVii s630, s660, s480 works better now

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: remove unnecessary delays for i2c transfer for some cards
Igor M. Liplianin [Sun, 27 Feb 2011 19:18:34 +0000 (16:18 -0300)]
[media] dw2102: remove unnecessary delays for i2c transfer for some cards

Prof 7500 and TeVii s630, s660, s480 works faster now

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: X3M TV SPC1400HD added
Igor M. Liplianin [Sun, 27 Feb 2011 19:17:25 +0000 (16:17 -0300)]
[media] dw2102: X3M TV SPC1400HD added

The card consist of PCI to USB bridge and USB DVB-S2 receiver.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ds3000: wrong hardware tune function implemented
Igor M. Liplianin [Sun, 27 Feb 2011 20:29:55 +0000 (17:29 -0300)]
[media] ds3000: wrong hardware tune function implemented

It is taken from another tree, where it is modified.
Patch to fix that

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] stv0900: Update status when LOCK is missed
Abylay Ospan [Mon, 14 Feb 2011 19:03:13 +0000 (16:03 -0300)]
[media] stv0900: Update status when LOCK is missed

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] stv0900: speed up DVB-S searching
Igor M. Liplianin [Mon, 28 Feb 2011 19:52:08 +0000 (16:52 -0300)]
[media] stv0900: speed up DVB-S searching

Simptoms:
After zapping DVB-S2 channel searching for DVB-S tooks long time.
Now it takes less than a second.

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] cx23885, altera-ci: remove operator return <value> in void procedure
Igor M. Liplianin [Sun, 27 Feb 2011 21:08:46 +0000 (18:08 -0300)]
[media] cx23885, altera-ci: remove operator return <value> in void procedure

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dib9000: fix return type in dib9000_mbx_send_attr()
Dan Carpenter [Wed, 19 Jan 2011 14:28:27 +0000 (11:28 -0300)]
[media] dib9000: fix return type in dib9000_mbx_send_attr()

dib9000_mbx_send_attr() returns an int.  It doesn't work to save
negative error codes in an unsigned char, so I've made "ret" an int
type.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dib8000: fix small memory leak on error
Dan Carpenter [Wed, 19 Jan 2011 14:27:58 +0000 (11:27 -0300)]
[media] dib8000: fix small memory leak on error

kfree(state) if fe allocation fails.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ASoC: WL1273 FM radio: Access I2C IO functions through pointers
Matti Aaltonen [Tue, 1 Mar 2011 13:10:37 +0000 (10:10 -0300)]
[media] ASoC: WL1273 FM radio: Access I2C IO functions through pointers

These changes are needed to keep up with the changes in the
MFD core and V4L2 parts of the wl1273 FM radio driver.

Use function pointers instead of exported functions for I2C IO.
Also move all preprocessor constants from the wl1273.h to
include/linux/mfd/wl1273-core.h.

Also update the year in the copyright statement.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver
Matti Aaltonen [Tue, 1 Mar 2011 13:10:36 +0000 (10:10 -0300)]
[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver

This module implements V4L2 controls for the Texas Instruments
WL1273 FM Radio and handles the communication with the chip.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] MFD: WL1273 FM Radio: MFD driver for the FM radio
Matti Aaltonen [Tue, 1 Mar 2011 13:10:35 +0000 (10:10 -0300)]
[media] MFD: WL1273 FM Radio: MFD driver for the FM radio

This is the core of the WL1273 FM radio driver, it connects
the two child modules. The two child drivers are
drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c.

The radio-wl1273 driver implements the V4L2 interface and communicates
with the device. The ALSA codec offers digital audio, without it only
analog audio is available.

Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] DocBook/v4l2.xml: Update version of the spec
Mauro Carvalho Chehab [Tue, 1 Mar 2011 19:03:11 +0000 (16:03 -0300)]
[media] DocBook/v4l2.xml: Update version of the spec

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] DocBook: Document the removal of the old VIDIOC_*_OLD ioctls
Mauro Carvalho Chehab [Tue, 1 Mar 2011 13:12:36 +0000 (10:12 -0300)]
[media] DocBook: Document the removal of the old VIDIOC_*_OLD ioctls

Those ioctls passed away. Properly documented it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] videodev2.h.xml: Update to reflect videodev2.h changes
Mauro Carvalho Chehab [Tue, 1 Mar 2011 12:48:27 +0000 (09:48 -0300)]
[media] videodev2.h.xml: Update to reflect videodev2.h changes

A few changes happened at videodev2.h:
- Addition of multiplane API;
- removal of VIDIOC_*_OLD ioctls;
- a few more video standards.

Update the file to reflect the latest changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years agomatrox: Remove legacy VIDIOC_*_OLD ioctls
Mauro Carvalho Chehab [Tue, 1 Mar 2011 11:17:47 +0000 (08:17 -0300)]
matrox: Remove legacy VIDIOC_*_OLD ioctls

Those ioctls were produced by the wrong arguments for _IO macros,
and were replaced by fixed versions on an early 2.6 kernel.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] media/radio/wl1273: fix build errors
Randy Dunlap [Sun, 27 Feb 2011 17:51:54 +0000 (14:51 -0300)]
[media] media/radio/wl1273: fix build errors

RADIO_WL1273 needs to make sure that the mfd core is built to avoid
build errors:

ERROR: "mfd_add_devices" [drivers/mfd/wl1273-core.ko] undefined!
ERROR: "mfd_remove_devices" [drivers/mfd/wl1273-core.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] via-camera: Add suspend/resume support
Daniel Drake [Fri, 11 Feb 2011 21:15:02 +0000 (18:15 -0300)]
[media] via-camera: Add suspend/resume support

Add suspend/resume support to the via-camera driver, so that the video
continues streaming over a suspend-resume cycle.

Originally implemented by Jon Corbet.

[mchehab@redhat.com: fix a small CodingStyle issue]
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] Technisat AirStar TeleStick 2
Lukas Max Fisch [Tue, 8 Feb 2011 19:51:45 +0000 (16:51 -0300)]
[media] Technisat AirStar TeleStick 2

Based on staging 2.6.39.

This patch is based on Veit Berwig's work.

Signed-off-by: Lukas Fisch <lukas.fisch@gmail.com>
Thanks-to: Veit Berwig <veit.Berwig@fimi.landsh.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] stv090x: handle allocation failures
Dan Carpenter [Tue, 15 Feb 2011 10:10:08 +0000 (07:10 -0300)]
[media] stv090x: handle allocation failures

kmalloc() can fail so check whether state->internal is NULL.
append_internal() can return NULL on allocation failures so check that.
Also if we hit the error condition later in the function then there is
a memory leak and we need to call remove_dev() to fix it.

Also Oliver Endriss pointed out an additional leak that I missed in the
first version of this patch.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] drivers:media:radio: Update Kconfig and Makefile for wl128x FM driver
Manjunatha Halli [Mon, 24 Jan 2011 05:26:59 +0000 (02:26 -0300)]
[media] drivers:media:radio: Update Kconfig and Makefile for wl128x FM driver

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] drivers:media:radio: wl128x: Kconfig & Makefile for wl128x driver
Manjunatha Halli [Tue, 11 Jan 2011 09:39:22 +0000 (06:39 -0300)]
[media] drivers:media:radio: wl128x: Kconfig & Makefile for wl128x driver

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] drivers:media:radio: wl128x: FM driver TX sources
Manjunatha Halli [Tue, 11 Jan 2011 09:37:53 +0000 (06:37 -0300)]
[media] drivers:media:radio: wl128x: FM driver TX sources

This has implementation for FM TX functionality.
It communicates with FM V4l2 module and FM common module.

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] drivers:media:radio: wl128x: FM driver RX sources
Manjunatha Halli [Tue, 11 Jan 2011 09:37:17 +0000 (06:37 -0300)]
[media] drivers:media:radio: wl128x: FM driver RX sources

This has implementation for FM RX functionality.
It communicates with FM V4l2 module and FM common module

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] drivers:media:radio: wl128x: FM Driver Common sources
Manjunatha Halli [Tue, 11 Jan 2011 09:35:22 +0000 (06:35 -0300)]
[media] drivers:media:radio: wl128x: FM Driver Common sources

These are the sources for the common interfaces required by the
FM V4L2 driver for TI WL127x and WL128x chips.

These implement the FM channel-8 protocol communication with the
chip. This makes use of the Shared Transport as its transport.

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] drivers:media:radio: wl128x: FM Driver V4L2 sources
Manjunatha Halli [Tue, 11 Jan 2011 09:34:26 +0000 (06:34 -0300)]
[media] drivers:media:radio: wl128x: FM Driver V4L2 sources

This module interfaces V4L2 subsystem and FM common module.
It registers itself with V4L2 as Radio module.

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] drivers:media:radio: wl128x: FM Driver common header file
Manjunatha Halli [Tue, 11 Jan 2011 09:33:18 +0000 (06:33 -0300)]
[media] drivers:media:radio: wl128x: FM Driver common header file

These are common headers used in FM submodules (FM V4L2,
FM common, FM Rx,and FM TX).

Signed-off-by: Manjunatha Halli <manjunatha_halli@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ivtv: yuv: handle get_user_pages() -errno returns
Paul Cassella [Sat, 12 Feb 2011 13:39:51 +0000 (10:39 -0300)]
[media] ivtv: yuv: handle get_user_pages() -errno returns

get_user_pages() may return -errno, such as -EFAULT.  So don't blindly use
its return value as an offset into dma->map[] for the next get_user_pages()
call.  Since we'll give up and return an error if either fails, don't even
make the second call if the first failed to give us exactly what we were
looking for.

The old code would also call put_page() on as many elements of dma->map[]
as we'd asked for, regardless of how many were valid.

[Andy Walls modified this patch to return -EFAULT instead of -EINVAL
as Paul's observation "I'm not sure -EINVAL is the best return code vs
-EFAULT or -ENOMEM, [...]" was correct.  The return value bubbles up
as a return code for write(), for which the V4L2 API spec indicates
EINVAL is incorrect and EFAULT is correct.]

Signed-off-by: Paul Cassella <fortytwo-ivtv@maneteren.bigw.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ivtv: Fix sparse warning regarding a user pointer in ivtv_write_vbi_from_user()
Andy Walls [Wed, 9 Feb 2011 01:39:28 +0000 (22:39 -0300)]
[media] ivtv: Fix sparse warning regarding a user pointer in ivtv_write_vbi_from_user()

Fix the first, botched attempt at preventing direct use of a user pointer in
ivtv_write_vbi().

Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ivtv: udma: handle get_user_pages() returning fewer pages than we asked for
Paul Cassella [Wed, 9 Feb 2011 01:22:52 +0000 (22:22 -0300)]
[media] ivtv: udma: handle get_user_pages() returning fewer pages than we asked for

get_user_pages() may return fewer page than we ask for.  As we give up and
return an error in this case, we need to put_page() each of the pages we
did get.

[Andy Walls modified the patch, only removing the braces in the 'for'
statement, to eliminate a checkpatch warning.]

Signed-off-by: Paul Cassella <fortytwo-ivtv@manetheren.bigw.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] Documentation: README.ivtv: Remove note that ivtvfb is not yet in the kernel
Paul Cassella [Wed, 9 Feb 2011 00:07:00 +0000 (21:07 -0300)]
[media] Documentation: README.ivtv: Remove note that ivtvfb is not yet in the kernel

ivtvfb is now in the kernel, so stop saying it's not.

Signed-off-by: Paul Cassella <fortytwo-ivtv@manetheren.bigw.org>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] cx88: add support for TeVii S464 PCI card
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:24 +0000 (18:41 -0300)]
[media] cx88: add support for TeVii S464 PCI card

The card uses ds3000 demod from Montage.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ds3000: hardware tune algorithm
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:24 +0000 (18:41 -0300)]
[media] ds3000: hardware tune algorithm

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ds3000: add carrier offset calculation
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:24 +0000 (18:41 -0300)]
[media] ds3000: add carrier offset calculation

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ds3000: remove unnecessary dnxt, dcur structures
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:24 +0000 (18:41 -0300)]
[media] ds3000: remove unnecessary dnxt, dcur structures

All necessary parameters already stored in frontend cache.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] ds3000: clean up in tune procedure
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:23 +0000 (18:41 -0300)]
[media] ds3000: clean up in tune procedure

Variable 'retune' does not make sense.
Loop is not needed for only one try.
Remove unnecessary dprintk's.
Remove a lot of debug messages and delays.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: Copyright, cards list updated
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:23 +0000 (18:41 -0300)]
[media] dw2102: Copyright, cards list updated

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: add support for the TeVii S480 PCIe
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:23 +0000 (18:41 -0300)]
[media] dw2102: add support for the TeVii S480 PCIe

The card consists of a PCI-e to USB Host Controller and
two TeVii S660 equivalent cards.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: fix TeVii s660 remote control
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:23 +0000 (18:41 -0300)]
[media] dw2102: fix TeVii s660 remote control

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: corrections for TeVii s660 LNB power control
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:23 +0000 (18:41 -0300)]
[media] dw2102: corrections for TeVii s660 LNB power control

There are two TeVii s660 modifications with different LNB power control
implementations. It is safe to call both methods for each card.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: unnecessary NULL's removed
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:23 +0000 (18:41 -0300)]
[media] dw2102: unnecessary NULL's removed

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: Prof 1100 initialization fix
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:23 +0000 (18:41 -0300)]
[media] dw2102: Prof 1100 initialization fix

RC keys structure for Prof 1100 already defined, so remove extra initialization.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: Prof 7500 remote fix
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:23 +0000 (18:41 -0300)]
[media] dw2102: Prof 7500 remote fix

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: Prof 7500: Lock LED implemented
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:22 +0000 (18:41 -0300)]
[media] dw2102: Prof 7500: Lock LED implemented

Code changed for dw2102, stv0900 in order to achieve that.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: Add Terratec Cinergy S2 USB HD
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:22 +0000 (18:41 -0300)]
[media] dw2102: Add Terratec Cinergy S2 USB HD

MarkusF wrote:
I accidently got a Terratec Cinergy S2 USB HD (instead of a Terratec Cinergy S2 PCI HD).
I found in the windows driver, that the driver is for the usb ids:
0CCD:00A8
1F4D:3000
The dvb-s2 usb adapter has the id 0CCD-00A8.
So I patches your driver and added the usb id, where the 1F4D:3000 is
and it worked (after I downloaded the firmware dvb-fe-ds3000.fw).
w_scan found the channels and vdr is working fine.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: add support for Geniatech SU3000 USB DVB-S2 card
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:22 +0000 (18:41 -0300)]
[media] dw2102: add support for Geniatech SU3000 USB DVB-S2 card

The card uses ds3000 demod from Montage.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: use separate firmwares for Prof 1100, TeVii S630, S660
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:22 +0000 (18:41 -0300)]
[media] dw2102: use separate firmwares for Prof 1100, TeVii S630, S660

Before this patch we can use only one card type from list due to
sharing one firmware name. Now it's fixed.
Also driver tries to attach only appropriate demod for this cards.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dw2102: Extend keymap parameter for not used remote
Igor M. Liplianin [Fri, 25 Feb 2011 21:41:22 +0000 (18:41 -0300)]
[media] dw2102: Extend keymap parameter for not used remote

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] TTUSB DVB: ttusb_boot_dsp() needs to release_firmware() or it leaks memory
Jesper Juhl [Sun, 6 Feb 2011 20:49:02 +0000 (17:49 -0300)]
[media] TTUSB DVB: ttusb_boot_dsp() needs to release_firmware() or it leaks memory

In drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c:ttusb_boot_dsp() we
need to call release_firmware(fw) before returning or we'll leak - no
matter if we succeed or fail.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] pvrusb2: Use sysfs_attr_init() where appropriate
Mike Isely [Sun, 13 Feb 2011 20:57:19 +0000 (17:57 -0300)]
[media] pvrusb2: Use sysfs_attr_init() where appropriate

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] pvrusb2: Minor VBI tweak to help potential CC support
Mike Isely [Sun, 13 Feb 2011 20:53:07 +0000 (17:53 -0300)]
[media] pvrusb2: Minor VBI tweak to help potential CC support

pvrusb2: Declare closed-caption setup for line 21 - this is needed for
sliced VBI capture support.  (However none of that works right now
anyway.)

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] pvrusb2: width and height maximum values
Servaas Vandenberghe [Sun, 13 Feb 2011 20:51:09 +0000 (17:51 -0300)]
[media] pvrusb2: width and height maximum values

pvrusb2: The origin of the capability bounds rectangle may differ from
(left=0,top=0) so the calculation should use absolute coordinates,
here below, or use relative coordinates like
cropl_val-cap->bounds.left and cropt_val-cap->bounds.top.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] pvrusb2: Fix a few missing default control values, for cropping
Mike Isely [Sun, 13 Feb 2011 20:34:33 +0000 (17:34 -0300)]
[media] pvrusb2: Fix a few missing default control values, for cropping

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] pvrusb2: Minor cosmetic code tweak
Mike Isely [Sun, 13 Feb 2011 20:32:47 +0000 (17:32 -0300)]
[media] pvrusb2: Minor cosmetic code tweak

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] pvrusb2: Handle change of mode before handling change of video standard
Mike Isely [Sun, 13 Feb 2011 20:31:55 +0000 (17:31 -0300)]
[media] pvrusb2: Handle change of mode before handling change of video standard

pvrusb2: Recognize and handle mode change before dealing with changes
related to the video standard.  Even though the video standard should
only matter when in analog mode, doing this way is technically cleaner
in case there's other stuff that might depend on both.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] dvb_pll: DVB-S incorrect tune settings for dw2102/dm1105/cx88/opera1
Malcolm Priestley [Sun, 6 Feb 2011 15:29:51 +0000 (12:29 -0300)]
[media] dvb_pll: DVB-S incorrect tune settings for dw2102/dm1105/cx88/opera1

This tuner PLL has missing initialisation settings resulting in
haphazard tuning. The PLL LPF was set to just 22000 symbol rate.

Basically, the module is a Sharp BS2F7HZ0194 (STV0299+IX2410)

I have had problems implementing the PLL in a new driver and
did not want to break the IX2410 out of the PLL.

This applies to DW2102, DM1105, CX88 and OPERA1 drivers.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
13 years ago[media] firedtv: drop obsolete backend abstraction
Stefan Richter [Sun, 6 Feb 2011 14:41:44 +0000 (11:41 -0300)]
[media] firedtv: drop obsolete backend abstraction

Since the drivers/ieee1394/ backend was removed from firedtv, its I/O no
longer needs to be abstracted as exchangeable backend methods.

Also, ieee1394 variants of module and device probe and removal are no
longer there.  Move module probe and removal into firedtv-fw.c where
device probe and removal are implemented.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>