GitHub/exynos8895/android_kernel_samsung_universal8895.git
15 years agoperf_counter: Implement generalized cache event types
Ingo Molnar [Fri, 5 Jun 2009 18:22:46 +0000 (20:22 +0200)]
perf_counter: Implement generalized cache event types

Extend generic event enumeration with the PERF_TYPE_HW_CACHE
method.

This is a 3-dimensional space:

       { L1-D, L1-I, L2, ITLB, DTLB, BPU } x
       { load, store, prefetch } x
       { accesses, misses }

User-space passes in the 3 coordinates and the kernel provides
a counter. (if the hardware supports that type and if the
combination makes sense.)

Combinations that make no sense produce a -EINVAL.
Combinations that are not supported by the hardware produce -ENOTSUP.

Extend the tools to deal with this, and rewrite the event symbol
parsing code with various popular aliases for the units and
access methods above. So 'l1-cache-miss' and 'l1d-read-ops' are
both valid aliases.

( x86 is supported for now, with the Nehalem event table filled in,
  and with Core2 and Atom having placeholder tables. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Separate out attr->type from attr->config
Ingo Molnar [Sat, 6 Jun 2009 07:58:57 +0000 (09:58 +0200)]
perf_counter: Separate out attr->type from attr->config

Counter type is a frequently used value and we do a lot of
bit juggling by encoding and decoding it from attr->config.

Clean this up by creating a separate attr->type field.

Also clean up the various similarly complex user-space bits
all around counter attribute management.

The net improvement is significant, and it will be easier
to add a new major type (which is what triggered this cleanup).

(This changes the ABI, all tools are adapted.)
(PowerPC build-tested.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf top: Fix zero or negative refresh delay
Frederic Weisbecker [Fri, 5 Jun 2009 17:31:01 +0000 (19:31 +0200)]
perf top: Fix zero or negative refresh delay

If perf top is executed with a zero value for the refresh rate,
we get a division by zero exception while computing samples_per_sec.

Also a zero refresh rate is not possible, neither do we want to
accept negative values.

[ Impact: fix division by zero in perf top ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244223061-5399-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf record: Set frequency correctly
Ingo Molnar [Fri, 5 Jun 2009 16:37:22 +0000 (18:37 +0200)]
perf record: Set frequency correctly

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Sample and display frequency adjustment changes
Ingo Molnar [Fri, 5 Jun 2009 16:07:51 +0000 (18:07 +0200)]
perf_counter tools: Sample and display frequency adjustment changes

To allow the debugging of frequency-adjusting counters, sample
those adjustments and display them in perf report -D.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Fix frequency adjustment for < HZ
Peter Zijlstra [Fri, 5 Jun 2009 16:01:29 +0000 (18:01 +0200)]
perf_counter: Fix frequency adjustment for < HZ

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Add PERF_SAMPLE_PERIOD
Peter Zijlstra [Fri, 5 Jun 2009 13:05:43 +0000 (15:05 +0200)]
perf_counter: Add PERF_SAMPLE_PERIOD

In order to allow easy tracking of the period, also provide means of
adding it to the sample data.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Change PERF_SAMPLE_CONFIG into PERF_SAMPLE_ID
Peter Zijlstra [Fri, 5 Jun 2009 12:44:52 +0000 (14:44 +0200)]
perf_counter: Change PERF_SAMPLE_CONFIG into PERF_SAMPLE_ID

The purpose of PERF_SAMPLE_CONFIG was to identify the counters,
since then we've added counter ids, use those instead.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Remove -march=native
Ingo Molnar [Fri, 5 Jun 2009 15:56:21 +0000 (17:56 +0200)]
perf_counter tools: Remove -march=native

Turns out that neither PowerPC nor older x86 compilers know this switch
...

and since it does not make a measurable difference, just omit it.

Reported-by: Paul Mackerras <paulus@samba.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Clarify events/samples naming
Ingo Molnar [Fri, 5 Jun 2009 12:29:10 +0000 (14:29 +0200)]
perf_counter tools: Clarify events/samples naming

A number of places said 'events' while they should say 'samples'.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Display user/kernel differentiator
Ingo Molnar [Fri, 5 Jun 2009 12:13:18 +0000 (14:13 +0200)]
perf report: Display user/kernel differentiator

Before:

    25.96%  copy_user_generic_string
    15.23%  two_op
    15.19%  one_op
     6.92%  enough_duration
     1.23%  alloc_pages_current
     1.14%  acpi_os_read_port
     1.08%  _spin_lock

After:

    25.96%  [k] copy_user_generic_string
    15.23%  [.] two_op
    15.19%  [.] one_op
     6.92%  [.] enough_duration
     1.23%  [k] alloc_pages_current
     1.14%  [k] acpi_os_read_port
     1.08%  [k] _spin_lock

The '[k]' differentiator is a quick clue that it's a kernel symbol,
without having to bring in the full dso column.

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Deal with maps
Peter Zijlstra [Fri, 5 Jun 2009 12:04:59 +0000 (14:04 +0200)]
perf report: Deal with maps

In order to deal with [vdso] maps generalize the ip->symbol path
a bit and allow to override some bits with custom functions.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Generate mmap events for install_special_mapping()
Peter Zijlstra [Fri, 5 Jun 2009 12:04:55 +0000 (14:04 +0200)]
perf_counter: Generate mmap events for install_special_mapping()

In order to track the vdso also generate mmap events for
install_special_mapping().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agox86: Set context.vdso before installing the mapping
Peter Zijlstra [Fri, 5 Jun 2009 12:04:51 +0000 (14:04 +0200)]
x86: Set context.vdso before installing the mapping

In order to make arch_vma_name() work from inside
install_special_mapping() we need to set the context.vdso
before calling it.

( This is needed for performance counters to be able to track
  this special executable area. )

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf record, top: Implement --freq
Ingo Molnar [Fri, 5 Jun 2009 11:27:02 +0000 (13:27 +0200)]
perf record, top: Implement --freq

Support frequency-based profiling and make it the default.

(Also add a Hz printout in perf top.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf record: Split out counter creation into a helper function
Ingo Molnar [Fri, 5 Jun 2009 11:18:41 +0000 (13:18 +0200)]
perf record: Split out counter creation into a helper function

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Fix incorrect printf formats
Yong Wang [Fri, 5 Jun 2009 03:37:35 +0000 (11:37 +0800)]
perf_counter tools: Fix incorrect printf formats

Otherwise the code does not compile on 32-bit boxes.

builtin-report.c: In function 'map__fprintf':
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 3 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 4 has type 'uint64_t'
builtin-report.c:240: error: format '%lx' expects type 'long unsigned int', but argument 5 has type 'uint64_t'

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20090605033735.GA20451@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Fix lockup with interrupting counters
Paul Mackerras [Fri, 5 Jun 2009 02:36:28 +0000 (12:36 +1000)]
perf_counter: Fix lockup with interrupting counters

Commit 8e3747c1 ("perf_counter: Change data head from u32 to u64")
changed the type of 'head' in struct perf_mmap_data from atomic_t
to atomic_long_t, but missed converting one use of atomic_read on
it to atomic_long_read.  The effect of using atomic_read rather than
atomic_long_read on powerpc (and other big-endian architectures) is
that we get the high half of the 64-bit quantity, resulting in the
cmpxchg retry loop in perf_output_begin spinning forever as soon as
data->head becomes non-zero.  On little-endian architectures such as
x86 we would get the low half, resulting in a lockup once data->head
becomes greater than 4G.

This fixes it by using atomic_long_read rather than atomic_read.

[ Impact: fix perfcounter lockup on PowerPC / big-endian systems ]

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18984.33964.21541.743096@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Fix warn_unused_result warnings
Frederic Weisbecker [Thu, 4 Jun 2009 20:15:58 +0000 (22:15 +0200)]
perf_counter tools: Fix warn_unused_result warnings

Fix warnings for return values that we don't care about:

 util/quote.c:222: attention : ignoring return value of ‘fwrite’, declared with attribute warn_unused_result
 util/quote.c:235: attention : ignoring return value of ‘fwrite’, declared with attribute warn_unused_result
 util/quote.c: In function ‘write_name_quotedpfx’:
 util/quote.c:290: attention : ignoring return value of ‘fwrite’, declared with attribute warn_unused_result

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244146558-8635-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Add -vvv to print the list of threads and its mmaps
Arnaldo Carvalho de Melo [Thu, 4 Jun 2009 16:54:00 +0000 (13:54 -0300)]
perf report: Add -vvv to print the list of threads and its mmaps

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Sleep before refresh using poll in perf top
Frederic Weisbecker [Thu, 4 Jun 2009 18:48:04 +0000 (20:48 +0200)]
perf_counter: Sleep before refresh using poll in perf top

perf top is refreshed every delay_secs the thread runs in such
loop:

while (sleep(delay_secs)) {
print_sym_table();
}

At the end of print_sym_table(), poll is used without sleep delay
to check if we have something from stdin.

It means that this check is done only every delay_secs, which can
be higher that 2 secs if the user defined a custom refresh rate.

We can drop sleep() here and directly use poll to wait between
refresh periods, so that the reaction after the user stops perf top
after typing "Enter" is immediate and doesn't suffer from the
delay_secs latency.

Nb: poll doesn't add any overhead that can parasite perf top measures
since it sleeps the entire timeout here.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1244141284-7507-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Use fork and remove munmap events
Peter Zijlstra [Thu, 4 Jun 2009 14:53:49 +0000 (16:53 +0200)]
perf_counter tools: Use fork and remove munmap events

Use fork events to clone comm and map data and remove everything
munmap related

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Remove munmap stuff
Peter Zijlstra [Thu, 4 Jun 2009 15:08:58 +0000 (17:08 +0200)]
perf_counter: Remove munmap stuff

In name of keeping it simple, only track mmap events. Userspace
will have to remove old overlapping maps when it encounters them.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Add fork event
Peter Zijlstra [Thu, 4 Jun 2009 14:53:44 +0000 (16:53 +0200)]
perf_counter: Add fork event

Create a fork event so that we can easily clone the comm and
dso maps without having to generate all those events.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf stat: Update help text
Ingo Molnar [Thu, 4 Jun 2009 14:33:00 +0000 (16:33 +0200)]
perf stat: Update help text

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Bail out if there are unrecognized options/arguments
Ingo Molnar [Thu, 4 Jun 2009 14:24:37 +0000 (16:24 +0200)]
perf report: Bail out if there are unrecognized options/arguments

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Dont output in color on !tty
Ingo Molnar [Thu, 4 Jun 2009 13:40:25 +0000 (15:40 +0200)]
perf_counter tools: Dont output in color on !tty

Dont emit ASCII color characters if the terminal is not a tty,
such as when perf report gets redirected into a file.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Add color terminal output support
Ingo Molnar [Thu, 4 Jun 2009 13:19:47 +0000 (15:19 +0200)]
perf_counter tools: Add color terminal output support

Add Git's color printing library to util/color.[ch].

Add it to perf report, with a trivial example to print high-overhead
entries in red, low-overhead entries in green.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Add consistent spacing rules
Peter Zijlstra [Thu, 4 Jun 2009 13:16:56 +0000 (15:16 +0200)]
perf report: Add consistent spacing rules

Make the sort header and the print function have the same column width.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Print out the total number of events
Ingo Molnar [Thu, 4 Jun 2009 12:21:16 +0000 (14:21 +0200)]
perf report: Print out the total number of events

So that the statistical quality of the profile can be estimated at a glance.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Print out symbol parsing errors only if --verbose
Ingo Molnar [Thu, 4 Jun 2009 12:13:04 +0000 (14:13 +0200)]
perf_counter tools: Print out symbol parsing errors only if --verbose

Also, add a suggestion to 'perf report', if the default sort order is
used.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Simplify symbol output
Peter Zijlstra [Thu, 4 Jun 2009 13:00:45 +0000 (15:00 +0200)]
perf report: Simplify symbol output

The DSO can be printed already - no need to repeat it in the
symbol field.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Build with native optimization
Ingo Molnar [Thu, 4 Jun 2009 11:58:13 +0000 (13:58 +0200)]
perf_counter tools: Build with native optimization

Build the tools with -march=native by default.

No measurable difference in speed though, compared to the
default, on a Nehalem testbox.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf record/report: Fix PID/COMM handling
Ingo Molnar [Thu, 4 Jun 2009 11:41:22 +0000 (13:41 +0200)]
perf record/report: Fix PID/COMM handling

Fix two bugs causing lost comm mappings:

 - initial PID is not 0 but getpid()

 - when we are unable to handle an mmap event, dont assume the event
   itself is broken - try to parse the stream. This way we wont lose
   comm events.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Documentation update
Yong Wang [Wed, 3 Jun 2009 08:42:25 +0000 (16:42 +0800)]
perf_counter: Documentation update

The 'nmi' bit is no longer there.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
LKML-Reference: <20090603084225.GA6553@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: powerpc: Use new identifier names in powerpc-specific code
Paul Mackerras [Wed, 3 Jun 2009 23:49:59 +0000 (09:49 +1000)]
perf_counter: powerpc: Use new identifier names in powerpc-specific code

Commit b23f3325 ("perf_counter: Rename various fields") fixed up
most of the uses of the renamed fields, but missed one instance
of "record_type" in powerpc-specific code which needs to be changed
to "sample_type", and a "PERF_RECORD_ADDR" in the same statement that
needs to be changed to "PERF_SAMPLE_ADDR", causing compilation
errors on powerpc.  This fixes it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18983.3111.770392.800486@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf top: Reduce default filter threshold
Ingo Molnar [Thu, 4 Jun 2009 06:53:05 +0000 (08:53 +0200)]
perf top: Reduce default filter threshold

On idle systems 'perf top' comes up empty by default, because the event
count filter is set to 100.

Reduce it to 5 instead.

Also add an option to limit the number of functions displayed.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Fix rbtree bug
Arnaldo Carvalho de Melo [Thu, 4 Jun 2009 02:02:33 +0000 (23:02 -0300)]
perf report: Fix rbtree bug

Ingo Molnar reported:

> FYI, i just got this crash (segfault) in perf report after
> collecting a long profile from Xorg:
>
> Starting program: /home/mingo/tip/Documentation/perf_counter/perf report
> [Thread debugging using libthread_db enabled]
> Detaching after fork from child process 20008.
> [New Thread 0x7f92fd62a6f0 (LWP 20005)]
>
> Program received signal SIGSEGV, Segmentation fault.
> 0x000000000041031a in __rb_erase_color (node=0x142c090, parent=0x0,
> root=0x881918)
>     at util/rbtree.c:143
> 143 if (parent->rb_left == node)

It was a problem introduced in this cset:

 perf report: Fix comm sorting - 8229289b607682f90b946ad2c319526303c17700

This patch should fix it.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Handle all known event types
Ingo Molnar [Wed, 3 Jun 2009 21:29:14 +0000 (23:29 +0200)]
perf report: Handle all known event types

We have munmap, throttle/unthrottle and period events as well,
process them - otherwise they are considered broke events and
we mis-parse the next few events.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Split out event processing helpers
Ingo Molnar [Wed, 3 Jun 2009 21:14:49 +0000 (23:14 +0200)]
perf report: Split out event processing helpers

- Introduce per event helper functions

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Clean up event processing
Ingo Molnar [Wed, 3 Jun 2009 21:14:49 +0000 (23:14 +0200)]
perf report: Clean up event processing

- Split out event processig into process_events() helper.

- Untangle the cwd parameters - it's constant so can be a static.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Fix throttling lock-up
Ingo Molnar [Wed, 3 Jun 2009 20:19:36 +0000 (22:19 +0200)]
perf_counter: Fix throttling lock-up

Throttling logic is broken and we can lock up with too small
hw sampling intervals.

Make the throttling code more robust: disable counters even
if we already disabled them.

( Also clean up whitespace damage i noticed while reading
  various pieces of code related to throttling. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Work around warnings in older GCCs
Ingo Molnar [Wed, 3 Jun 2009 19:48:40 +0000 (21:48 +0200)]
perf_counter tools: Work around warnings in older GCCs

GCC 4.1.2 produces:

 util/parse-options.c: In function ‘get_value’:
 util/parse-options.c:36: warning: ‘arg’ may be used uninitialized in this function

 builtin-top.c: In function ‘display_thread’:
 builtin-top.c:178: warning: ‘printed’ may be used uninitialized in this function

Annotate them away by initializing these variables to 0.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Fix off-by-one bug in symbol__new
Arnaldo Carvalho de Melo [Wed, 3 Jun 2009 17:49:21 +0000 (14:49 -0300)]
perf_counter tools: Fix off-by-one bug in symbol__new

The end is really (start + len - 1). Noticed when synthesizing
the PLT symbols, that are small (16 bytes), and hot on the
start RIP.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20090603174921.GG7805@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Optimize harder
Ingo Molnar [Wed, 3 Jun 2009 18:13:51 +0000 (20:13 +0200)]
perf_counter tools: Optimize harder

Use -O6 to build the tools.

Before:

    12387507370  instructions         #    3121.653 M/sec

After:

     6244894971  instructions         #    3458.437 M/sec

Almost twice as fast!

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf help: Fix bug when there's no perf-* command around
Ingo Molnar [Wed, 3 Jun 2009 18:09:11 +0000 (20:09 +0200)]
perf help: Fix bug when there's no perf-* command around

main_cmds can be empty - fix util/help.c to handle this case
without segfaulting.

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Add front-entry cache for lookups
Ingo Molnar [Wed, 3 Jun 2009 17:59:24 +0000 (19:59 +0200)]
perf report: Add front-entry cache for lookups

Before:

 Performance counter stats for './perf report -i perf.data.big':

     12453988058  instructions

 Performance counter stats for './perf report -i perf.data.big':

     12379566017  instructions

0.60% reduction.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf stat: Print out all arguments
Ingo Molnar [Wed, 3 Jun 2009 17:36:07 +0000 (19:36 +0200)]
perf stat: Print out all arguments

Before:

 Performance counter stats for '/home/mingo/hackbench':

After:

 Performance counter stats for '/home/mingo/hackbench 10':

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Display 100% correctly
Ingo Molnar [Wed, 3 Jun 2009 17:30:38 +0000 (19:30 +0200)]
perf report: Display 100% correctly

Needs to be 6.2 not 5.2, for 100.00% to be aligned properly.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf record: Refine capture printout
Ingo Molnar [Wed, 3 Jun 2009 17:27:19 +0000 (19:27 +0200)]
perf record: Refine capture printout

Print out the number of bytes captured, and the (estimated) number of
events the output file contains.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Clean up old kerneltop references
Ingo Molnar [Wed, 3 Jun 2009 17:17:25 +0000 (19:17 +0200)]
perf_counter tools: Clean up old kerneltop references

kerneltop has been replaced with perf top - so fix up a few
remaining references to it in display text and error messages.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Fix race in counter initialization
Peter Zijlstra [Wed, 3 Jun 2009 12:01:36 +0000 (14:01 +0200)]
perf_counter: Fix race in counter initialization

We need the PID namespace and counter ID available when the
counter overflows and we need to generate a sample event.

[ Impact: fix kernel crash with high-frequency sampling ]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
[ fixed a further crash and cleaned up the initialization a bit ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Fix comm sorting
Peter Zijlstra [Wed, 3 Jun 2009 10:37:36 +0000 (12:37 +0200)]
perf report: Fix comm sorting

Since we can (and do) change comm strings during the collection
phase, we cannot actually sort on them to build the histogram.
Therefore add an (optional) third sorting phase to collapse the
histrogram.

Comm sorting now builds the histrogram on threads and then in
the collapse phase collects all threads with the same comm.

This collapsed histogram is then reversed and sorted on events.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf record: Use long arg for counter period
Peter Zijlstra [Wed, 3 Jun 2009 09:24:33 +0000 (11:24 +0200)]
perf record: Use long arg for counter period

I wrote this to test the extended period emulation, we might as
well merge it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Add a comm hook for pure fork()s
Peter Zijlstra [Wed, 3 Jun 2009 09:23:56 +0000 (11:23 +0200)]
perf_counter: Add a comm hook for pure fork()s

I noticed missing COMM events and found that we missed
reporting them for pure forks.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: powerpc: Fix race causing "oops trying to read PMC0" errors
Paul Mackerras [Wed, 3 Jun 2009 09:40:36 +0000 (19:40 +1000)]
perf_counter: powerpc: Fix race causing "oops trying to read PMC0" errors

When using interrupting counters and limited (non-interrupting)
counters at the same time, it's possible that we get an
interrupt in write_mmcr0() after writing MMCR0 but before we
have set up the counters using limited PMCs.  What happens then
is that we get into perf_counter_interrupt() with
counter->hw.idx = 0 for the limited counters, leading to the
"oops trying to read PMC0" error message being printed.

This fixes the problem by making perf_counter_interrupt()
robust against counter->hw.idx being zero (the counter is just
ignored in that case) and also by changing write_mmcr0() to
write MMCR0 initially with the counter overflow interrupt
enable bits masked (set to 0).  If the MMCR0 value requested by
the caller has either of those bits set, we write MMCR0 again
with the requested value of those bits after setting up the
limited counters properly.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <18982.17684.138182.954599@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: powerpc: Fix event alternative code generation on POWER5/5+
Paul Mackerras [Wed, 3 Jun 2009 09:38:58 +0000 (19:38 +1000)]
perf_counter: powerpc: Fix event alternative code generation on POWER5/5+

Commit ef923214 ("perf_counter: powerpc: use u64 for event
codes internally") introduced a bug where the return value from
function find_alternative_bdecode gets put into a u64 variable
and later tested to see if it is < 0.  The effect is that we
get extra, bogus event code alternatives on POWER5 and POWER5+,
leading to error messages such as "oops compute_mmcr failed"
being printed and counters not counting properly.

This fixes it by using s64 for the return type of
find_alternative_bdecode and for the local variable that the
caller puts the value in.  It also makes the event argument a
u64 on POWER5+ for consistency.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <18982.17586.666132.90983@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Handle vDSO symbols properly
Ingo Molnar [Wed, 3 Jun 2009 08:39:26 +0000 (10:39 +0200)]
perf report: Handle vDSO symbols properly

We were not looking up vDSO symbols properly, because they
are in the kallsyms but are user-mode entries.

Pass negative addresses to the kernel dso object, this
way we resolve them properly:

     0.05%  [kernel]: vread_tsc

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Improve sort key recognition
Ingo Molnar [Wed, 3 Jun 2009 08:07:39 +0000 (10:07 +0200)]
perf report: Improve sort key recognition

 - allow case-insensitive tokens - such as --sort Comm,Symbol
 - allow substring shortcuts: --sort sym
 - detect invalid tokens and bail out

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Print -D to stdout
Ingo Molnar [Wed, 3 Jun 2009 07:38:58 +0000 (09:38 +0200)]
perf report: Print -D to stdout

-D prints to stderr - which is a bit confusing - print to stdout
instead.

Also clean up the if (dump_trace) patterns via a dprintf helper.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Cover PLT symbols too
Arnaldo Carvalho de Melo [Wed, 3 Jun 2009 03:54:33 +0000 (00:54 -0300)]
perf_counter tools: Cover PLT symbols too

PLT, the Program Linking Table, is used with the dynamic linker to
allow PIC code in executables and shared objects to figure out
where functions are in other shared objects.

It is one of the sources of unknown/unresolved symbols - this patch
does what binutils figures out when you ask it to disassembly.
(objdump -S)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter/x86: Remove the IRQ (non-NMI) handling bits
Yong Wang [Wed, 3 Jun 2009 05:12:55 +0000 (13:12 +0800)]
perf_counter/x86: Remove the IRQ (non-NMI) handling bits

Remove the IRQ (non-NMI) handling bits as NMI will be used always.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090603051255.GA2791@ywang-moblin2.bj.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf record: Print out the number of events captured
Ingo Molnar [Tue, 2 Jun 2009 21:43:11 +0000 (23:43 +0200)]
perf record: Print out the number of events captured

It makes sense to inform the user about how many events
perf record has written - so that the sufficiency of
profiling coverage and intensity can be determined at
a glance.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Make source code headers more coherent
Ingo Molnar [Tue, 2 Jun 2009 21:37:05 +0000 (23:37 +0200)]
perf_counter tools: Make source code headers more coherent

The perf commands had different ways of describing themselves,
introduce a coherent command-file-header format taken from the
Git project.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Print more info instead of <unknown> entries
Ingo Molnar [Tue, 2 Jun 2009 21:24:45 +0000 (23:24 +0200)]
perf report: Print more info instead of <unknown> entries

Sometimes we still fail to find a DSO or look up a symbol,
print out the raw information in this case (which an help
debug the problem), instead of a not very helpful <unknown>
string.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf record: Increase mmap buffering default
Ingo Molnar [Tue, 2 Jun 2009 21:02:59 +0000 (23:02 +0200)]
perf record: Increase mmap buffering default

I've run into mmap overruns with the current 16 pages default,
increase it to 128 pages.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf record: Add --append option
Ingo Molnar [Tue, 2 Jun 2009 20:59:57 +0000 (22:59 +0200)]
perf record: Add --append option

Allow incremental profiling via 'perf record -A' - this will append
to an existing perf.data.

Also reorder perf record options by utility / likelyhood of usage.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Fix column width/alignment of dsos
Ingo Molnar [Tue, 2 Jun 2009 20:12:14 +0000 (22:12 +0200)]
perf report: Fix column width/alignment of dsos

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Separate out idle threads
Peter Zijlstra [Tue, 2 Jun 2009 19:02:36 +0000 (21:02 +0200)]
perf report: Separate out idle threads

Introduce the special comm name [idle] for idle theads.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Fix up the ABI shakeup
Peter Zijlstra [Tue, 2 Jun 2009 15:38:21 +0000 (17:38 +0200)]
perf_counter tools: Fix up the ABI shakeup

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Rename perf_counter_hw_event => perf_counter_attr
Peter Zijlstra [Tue, 2 Jun 2009 17:22:16 +0000 (19:22 +0200)]
perf_counter: Rename perf_counter_hw_event => perf_counter_attr

The structure isn't hw only and when I read event, I think about those
things that fall out the other end. Rename the thing.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
Cc: Stephane Eranian <eranian@googlemail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Add ioctl for changing the sample period/frequency
Peter Zijlstra [Tue, 2 Jun 2009 14:46:57 +0000 (16:46 +0200)]
perf_counter: Add ioctl for changing the sample period/frequency

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Change data head from u32 to u64
Peter Zijlstra [Tue, 2 Jun 2009 14:16:02 +0000 (16:16 +0200)]
perf_counter: Change data head from u32 to u64

Since some people worried that 4G might not be a large enough
as an mmap data window, extend it to 64 bit for capable
platforms.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: x86: Emulate longer sample periods
Peter Zijlstra [Tue, 2 Jun 2009 14:08:20 +0000 (16:08 +0200)]
perf_counter: x86: Emulate longer sample periods

Do as Power already does, emulate sample periods up to 2^63-1 by
composing them of smaller values limited by hardware capabilities.
Only once we wrap the software period do we generate an overflow
event.

Just 10 lines of new code.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Remove the last nmi/irq bits
Peter Zijlstra [Tue, 2 Jun 2009 13:27:45 +0000 (15:27 +0200)]
perf_counter: Remove the last nmi/irq bits

IRQ (non-NMI) sampling is not used anymore - remove the last few bits.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Rename various fields
Peter Zijlstra [Tue, 2 Jun 2009 13:13:03 +0000 (15:13 +0200)]
perf_counter: Rename various fields

A few renames:

  s/irq_period/sample_period/
  s/irq_freq/sample_freq/
  s/PERF_RECORD_/PERF_SAMPLE_/
  s/record_type/sample_type/

And change both the new sample_type and read_format to u64.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Add unique counter id
Peter Zijlstra [Tue, 2 Jun 2009 13:08:15 +0000 (15:08 +0200)]
perf_counter: Add unique counter id

Stephan raised the issue that we currently cannot distinguish between
similar counters within a group (PERF_RECORD_GROUP uses the config
value as identifier).

Therefore, generate a new ID for each counter using a global u64
sequence counter.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agox86: Fix atomic_long_xchg() on 64bit
Peter Zijlstra [Tue, 2 Jun 2009 15:01:58 +0000 (17:01 +0200)]
x86: Fix atomic_long_xchg() on 64bit

Apparently I'm the first to use it :-)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Remove the last nmi bits
Peter Zijlstra [Tue, 2 Jun 2009 13:56:26 +0000 (15:56 +0200)]
perf_counter tools: Remove the last nmi bits

Everything is nmi these days, remove the userspace bits so that
the kernel can drop the interface.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf report: Clean up the default output
Ingo Molnar [Tue, 2 Jun 2009 13:34:25 +0000 (15:34 +0200)]
perf report: Clean up the default output

 - extra space between columns
 - left-aligned the symbol column
 - moved the no-symbols printout to -v

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: tools: Better handle existing data files
Peter Zijlstra [Tue, 2 Jun 2009 13:52:24 +0000 (15:52 +0200)]
perf_counter: tools: Better handle existing data files

Provide an argument (-f) to overwrite existing data files.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: tools: Expand the COMM,MMAP event synthesizer
Peter Zijlstra [Tue, 2 Jun 2009 12:13:24 +0000 (14:13 +0200)]
perf_counter: tools: Expand the COMM,MMAP event synthesizer

Include code to pre-construct mappings based on /proc,
on system wide recording.

Fix the existing code to properly fill out ->pid and ->tid.

The PID should be the Thread Group ID (PIDTYPE_PID of task->group_leader)
The TID should be the Thread ID (PIDTYPE_PID of task)

Furthermore, change the default sorting of report to comm,dso for a
better quick overview.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Use PID namespaces properly
Peter Zijlstra [Tue, 2 Jun 2009 12:13:15 +0000 (14:13 +0200)]
perf_counter: Use PID namespaces properly

Stop using task_struct::pid and start using PID namespaces.

PIDs will be reported in the PID namespace of the monitoring
task at the moment of counter creation.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Remove unused prev_state field
Paul Mackerras [Mon, 1 Jun 2009 07:53:16 +0000 (17:53 +1000)]
perf_counter: Remove unused prev_state field

This removes the prev_state field of struct perf_counter since
it is now unused.  It was only used by the cpu migration
counter, which doesn't use it any more.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.35052.915728.626374@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Fix cpu migration counter
Paul Mackerras [Mon, 1 Jun 2009 07:52:30 +0000 (17:52 +1000)]
perf_counter: Fix cpu migration counter

This fixes the cpu migration software counter to count
correctly even when contexts get swapped from one task to
another.  Previously the cpu migration counts reported by perf
stat were bogus, ranging from negative to several thousand for
a single "lat_ctx 2 8 32" run.  With this patch the cpu
migration count reported for "lat_ctx 2 8 32" is almost always
between 35 and 44.

This fixes the problem by adding a call into the perf_counter
code from set_task_cpu when tasks are migrated.  This enables
us to use the generic swcounter code (with some modifications)
for the cpu migration counter.

This modifies the swcounter code to allow a NULL regs pointer
to be passed in to perf_swcounter_ctx_event() etc.  The cpu
migration counter does this because there isn't necessarily a
pt_regs struct for the task available.  In this case, the
counter will not have interrupt capability - but the migration
counter didn't have interrupt capability before, so this is no
loss.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.35006.819769.416327@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Initialize per-cpu context earlier on cpu up
Paul Mackerras [Tue, 2 Jun 2009 11:05:16 +0000 (21:05 +1000)]
perf_counter: Initialize per-cpu context earlier on cpu up

This arranges for perf_counter's notifier for cpu hotplug
operations to be called earlier than the migration notifier in
sched.c by increasing its priority to 20, compared to the 10
for the migration notifier.  The reason for doing this is that
a subsequent commit to convert the cpu migration counter to use
the generic swcounter infrastructure will add a call into the
perf_counter subsystem when tasks get migrated.  Therefore the
perf_counter subsystem needs a chance to initialize its per-cpu
data for the new cpu before it can get called from the
migration code.

This also adds a comment to the migration notifier noting that
its priority needs to be lower than that of the perf_counter
notifier.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18981.1900.792795.836858@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Fix uninitialized variable in perf-report.c
Mike Galbraith [Tue, 2 Jun 2009 09:04:44 +0000 (11:04 +0200)]
perf_counter tools: Fix uninitialized variable in perf-report.c

# make prefix=/usr/local V=1
gcc -o builtin-report.o -c -O2 -ggdb3 -Wall -Werror -Wstrict-prototypes -Wmissing-declarations -Wmissing-prototypes -std=gnu99 -Wdeclaration-after-statement   -DSHA1_HEADER='<openssl/sha.h>'  builtin-report.c
cc1: warnings being treated as errors
builtin-report.c: In function ‘__cmd_report’:
builtin-report.c:626: error: ‘cwdlen’ may be used uninitialized in this function

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <new-submission>

15 years agoperf_counter tools: Cleanup Makefile
Mike Galbraith [Tue, 2 Jun 2009 08:17:34 +0000 (10:17 +0200)]
perf_counter tools: Cleanup Makefile

We currently build perf-stat/record etc, only to do nothing
with them.  We also install the perf binary in two places,
$prefix/bin and $perfexec_instdir, which appears to be for
binaries which perf would exec were a command not linked in.
Correct this, and comment out broken/incomplete targets dist
and coverage.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Make .gitignore reflect perf_counter tools files
Mike Galbraith [Tue, 2 Jun 2009 06:09:48 +0000 (08:09 +0200)]
perf_counter tools: Make .gitignore reflect perf_counter tools files

Make .gitignore reflect perf_counter tools files so
git status doesn't gripe about untracked files.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Add missing rb_erase in dso__delete_symbols
Arnaldo Carvalho de Melo [Mon, 1 Jun 2009 20:50:57 +0000 (17:50 -0300)]
perf_counter tools: Add missing rb_erase in dso__delete_symbols

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090601205057.GB7805@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Use hex2u64 in more places
Arnaldo Carvalho de Melo [Mon, 1 Jun 2009 20:50:19 +0000 (17:50 -0300)]
perf_counter tools: Use hex2u64 in more places

This has also a nice side effect, tools built on newer systems such as
fedora 10 again work on systems with older versions of glibc:

My workstation:

[acme@doppio ~]$ rpm -q glibc.x86_64
glibc-2.9-3.x86_64

Test machine:

[acme@emilia ~]$ rpm -q glibc.x86_64
glibc-2.5-24

Before:

[acme@emilia ~]$ perf
perf: /lib64/libc.so.6: version `GLIBC_2.7' not found (required by perf)
[acme@emilia ~]$ nm `which perf` | grep GLIBC_2\.7
                 U __isoc99_sscanf@@GLIBC_2.7
[acme@emilia ~]$

After:
[acme@emilia ~]$ perf
usage: perf [--version] [--help] COMMAND [ARGS]

The most commonly used perf commands are:
   record   Run a command and record its profile into perf.data
   report   Read perf.data (created by perf record) and display the
profile
   stat     Run a command and gather performance counter statistics
   top      Run a command and profile it

See 'perf help COMMAND' for more information on a specific command.
[acme@emilia ~]$ nm `which perf` | grep GLIBC_2\.7
[acme@emilia ~]$

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090601205019.GA7805@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Add string.[ch]
Arnaldo Carvalho de Melo [Tue, 2 Jun 2009 01:31:03 +0000 (22:31 -0300)]
perf_counter tools: Add string.[ch]

Add hex conversion libraries. We are going to replace sscanf()
uses with them.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Guard against record damaging existing files
Mike Galbraith [Thu, 28 May 2009 14:28:53 +0000 (16:28 +0200)]
perf_counter tools: Guard against record damaging existing files

Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Tidy up style details
Ingo Molnar [Mon, 1 Jun 2009 08:13:37 +0000 (10:13 +0200)]
perf_counter: Tidy up style details

 - whitespace fixlets
 - make local variable definitions more consistent

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Allow software counters to count while task is not running
Paul Mackerras [Mon, 1 Jun 2009 07:49:14 +0000 (17:49 +1000)]
perf_counter: Allow software counters to count while task is not running

This changes perf_swcounter_match() so that per-task software
counters can count events that occur while their associated
task is not running.  This will allow us to use the generic
software counter code for counting task migrations, which can
occur while the task is not scheduled in.

To do this, we have to distinguish between the situations where
the counter is inactive because its task has been scheduled
out, and those where the counter is inactive because it is part
of a group that was not able to go on the PMU.  In the former
case we want the counter to count, but not in the latter case.
If the context is active, we have the latter case.  If the
context is inactive then we need to know whether the counter
was counting when the context was last active, which we can
determine by comparing its ->tstamp_stopped timestamp with the
context's timestamp.

This also folds three checks in perf_swcounter_match, checking
perf_event_raw(), perf_event_type() and perf_event_id()
individually, into a single 64-bit comparison on
counter->hw_event.config, as an optimization.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.34810.259718.955621@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter: Provide functions for locking and pinning the context for a task
Paul Mackerras [Mon, 1 Jun 2009 07:48:12 +0000 (17:48 +1000)]
perf_counter: Provide functions for locking and pinning the context for a task

This abstracts out the code for locking the context associated
with a task.  Because the context might get transferred from
one task to another concurrently, we have to check after
locking the context that it is still the right context for the
task and retry if not.  This was open-coded in
find_get_context() and perf_counter_init_task().

This adds a further function for pinning the context for a
task, i.e. marking it so it can't be transferred to another
task.  This adds a 'pin_count' field to struct
perf_counter_context to indicate that a context is pinned,
instead of the previous method of setting the parent_gen count
to all 1s.  Pinning the context with a pin_count is easier to
undo and doesn't require saving the parent_gen value.  This
also adds a perf_unpin_context() to undo the effect of
perf_pin_task_context() and changes perf_counter_init_task to
use it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <18979.34748.755674.596386@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoMerge branch 'linus' into perfcounters/core
Ingo Molnar [Mon, 1 Jun 2009 08:01:03 +0000 (10:01 +0200)]
Merge branch 'linus' into perfcounters/core

Merge reason: merge almost-rc8 into perfcounters/core, which was -rc6
              based - to pick up the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Fix unknown command help text
Ingo Molnar [Sun, 31 May 2009 20:09:49 +0000 (22:09 +0200)]
perf_counter tools: Fix unknown command help text

Arjan reported this error when entering an unknown command to perf:

  $ perf start
  fatal: Uh oh. Your system reports no Git commands at all.

The Git code expects there to be perf-* commands - but since Perf
is a 'pure' utility with no dash commands anymore, this old assumption
of Git does not hold anymore. Remove that error check.

Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Generate per command manpages (and pdf/html, etc.)
Ingo Molnar [Sat, 30 May 2009 10:38:51 +0000 (12:38 +0200)]
perf_counter tools: Generate per command manpages (and pdf/html, etc.)

Import Git's nice .txt => {man/html/pdf} generation machinery.

Fix various errors in the Documentation/perf*.txt description as well.

Also fix a bug in builtin-help: we'd map 'perf help top' to 'perftop'
if only the 'perf' binary is in the default PATH - confusing the manpage
logic. I dont fully understand why Git did it this way - but i suppose
it's a migration artifact from their migration from standalone git-xyz
commands to 'git xyz' commands. The perf tools were always using the
modern form so it's not an issue there.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
15 years agoperf_counter tools: Fix 'make install'
Ingo Molnar [Sat, 30 May 2009 10:38:51 +0000 (12:38 +0200)]
perf_counter tools: Fix 'make install'

'make install' didnt install perf itself - which needs a special
rule to be copied to bindir.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>