GitHub/moto-9609/android_kernel_motorola_exynos9610.git
15 years agomac80211: resume properly, add suspend/resume test
Johannes Berg [Fri, 13 Mar 2009 10:44:18 +0000 (11:44 +0100)]
mac80211: resume properly, add suspend/resume test

When mac80211 resumes, it currently doesn't reconfigure the interfaces
entirely and also doesn't reconfigure BSS information -- fix this.

Also, to be able to test this, add a debugfs file that just calls
the suspend/resume code to see what happens when we go through that,
without needing the time-consuming suspend/resume cycle.

(Original version broke the build for CONFIG_PM=n.  Define alternative
functions for that situation. -- JWL)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agob43: Mask PHY TX error interrupt, if not debugging
Michael Buesch [Thu, 19 Mar 2009 18:27:21 +0000 (19:27 +0100)]
b43: Mask PHY TX error interrupt, if not debugging

This masks the PHY TX error interrupt, if debugging is disabled.

Currently we have a bug somewhere which triggers this interrupt once
in a while. (Depends on the network noise/quality). While this is nonfatal,
it scares the hell out of users and we frequently receive bugreports
that incorrectly identify this error message as the reason.

There's another problem with this. The PHY TX error interrupt is protected
with a watchdog that will restart the device if it keeps triggering very often.
This is used to fix interrupt storms from completely broken devices.

However, this watchdog might trigger in completely normal operation.
If the TX capacity of the card is saturated, the likeliness of the watchdog
triggering increases, as more TX errors occur. The current threshold
for the watchdog is 1000 errors in 15 seconds.

This patch adds a workaround for the issue by just enabling the interrupt
if debugging is disabled (by Kconfig or by modparam).

This has the downside that real fatal PHY TX errors are not caught anymore.
But this is nonfatal due to the following reasons:
* If the card is not able to transmit anymore, MLME will notice anyway.
* I did _never_ see a real fatal PHY TX error in a mainline b43 driver.
* It does _not_ result in interrupt storms or something like that.
  It will simply result in a stalled card. It can be debugged by enabling
  the debugging module parameter.

Signed-off-by: Michael Buesch <mb@bu3sch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agowireless/p54: P54_SPI should depend on GENERIC_HARDIRQS
Geert Uytterhoeven [Thu, 19 Mar 2009 12:33:52 +0000 (13:33 +0100)]
wireless/p54: P54_SPI should depend on GENERIC_HARDIRQS

m68k allmodconfig:
| drivers/net/wireless/p54/p54spi.c: In function 'p54spi_probe':
| drivers/net/wireless/p54/p54spi.c:675: error: implicit declaration of function
| 'set_irq_type'
| make[4]: *** [drivers/net/wireless/p54/p54spi.o] Error 1

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agonl80211: Add MLME primitives to support external SME
Jouni Malinen [Thu, 19 Mar 2009 11:39:22 +0000 (13:39 +0200)]
nl80211: Add MLME primitives to support external SME

This patch adds new nl80211 commands to allow user space to request
authentication and association (and also deauthentication and
disassociation). The commands are structured to allow separate
authentication and association steps, i.e., the interface between
kernel and user space is similar to the MLME SAP interface in IEEE
802.11 standard and an user space application takes the role of the
SME.

The patch introduces MLME-AUTHENTICATE.request,
MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and
MLME-DISASSOCIATE.request primitives. The authentication and
association commands request the actual operations in two steps
(assuming the driver supports this; if not, separate authentication
step is skipped; this could end up being a separate "connect"
command).

The initial implementation for mac80211 uses the current
net/mac80211/mlme.c for actual sending and processing of management
frames and the new nl80211 commands will just stop the current state
machine from moving automatically from authentication to association.
Future cleanup may move more of the MLME operations into cfg80211.

The goal of this design is to provide more control of authentication and
association process to user space without having to move the full MLME
implementation. This should be enough to allow IEEE 802.11r FT protocol
and 802.11s SAE authentication to be implemented. Obviously, this will
also bring the extra benefit of not having to use WEXT for association
requests with mac80211. An example implementation of a user space SME
using the new nl80211 commands is available for wpa_supplicant.

This patch is enough to get IEEE 802.11r FT protocol working with
over-the-air mechanism (over-the-DS will need additional MLME
primitives for handling the FT Action frames).

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agonl80211: Event notifications for MLME events
Jouni Malinen [Thu, 19 Mar 2009 11:39:21 +0000 (13:39 +0200)]
nl80211: Event notifications for MLME events

Add new nl80211 event notifications (and a new multicast group, "mlme")
for informing user space about received and processed Authentication,
(Re)Association Response, Deauthentication, and Disassociation frames in
station and IBSS modes (i.e., MLME SAP interface primitives
MLME-AUTHENTICATE.confirm, MLME-ASSOCIATE.confirm,
MLME-REASSOCIATE.confirm, MLME-DEAUTHENTICATE.indicate, and
MLME-DISASSOCIATE.indication). The event data is encapsulated as the 802.11
management frame since we already have the frame in that format and it
includes all the needed information.

This is the initial step in providing MLME SAP interface for
authentication and association with nl80211. In other words, kernel code
will act as the MLME and a user space application can control it as the
SME.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: Fix reassociation by not clearing previous BSSID
Jouni Malinen [Thu, 19 Mar 2009 11:39:20 +0000 (13:39 +0200)]
mac80211: Fix reassociation by not clearing previous BSSID

We must not clear the previous BSSID when roaming to another AP within
the same ESS for reassociation to be used properly. It is fine to
clear this when the SSID changes, so let's move the code into
ieee80211_sta_set_ssid().

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: Fix a typo in assoc vs. reassoc check
Jouni Malinen [Thu, 19 Mar 2009 11:39:19 +0000 (13:39 +0200)]
mac80211: Fix a typo in assoc vs. reassoc check

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Fix rate control update for aggregated frames
Vasanthakumar Thiagarajan [Wed, 18 Mar 2009 14:52:00 +0000 (20:22 +0530)]
ath9k: Fix rate control update for aggregated frames

We will miss rate control update if first A-MPDU of an
aggregation is not Block Acked as we always tell if the
rate control needs to updated through update_rc of first
A-MPDU. This patch does rate control update for the first
A-MPDU which notifies it's tx status (which is not
necessarily the first A-MPDU of an aggregation) to mac80211.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: kill IEEE80211_CONF_SHORT_SLOT_TIME
Johannes Berg [Wed, 18 Mar 2009 13:29:38 +0000 (14:29 +0100)]
mac80211: kill IEEE80211_CONF_SHORT_SLOT_TIME

No drivers use it any more, so it can now be removed safely.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: don't drop nullfunc frames during software scan
Kalle Valo [Wed, 18 Mar 2009 12:06:44 +0000 (14:06 +0200)]
mac80211: don't drop nullfunc frames during software scan

ieee80211_tx_h_check_assoc() was dropping everything else than probe
requests during software scan. So the nullfunc frame with the power save
bit was dropped and AP never received it. This meant that AP never
buffered any frames for the station during software scan.

Fix this by allowing to transmit both probe request and nullfunc frames
during software scan. Tested with stlc45xx.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwl3945: replace stations with stations_39
Abhijeet Kolekar [Wed, 18 Mar 2009 04:51:53 +0000 (21:51 -0700)]
iwl3945: replace stations with stations_39

A *leftover* stations is replaced with stations_39.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwlwifi: report error when detect failure during stop agg queue
Wey-Yi Guy [Wed, 18 Mar 2009 04:51:52 +0000 (21:51 -0700)]
iwlwifi: report error when detect failure during stop agg queue

This fix related to bug 1921 at
http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1921

when detect error during stopping tx aggregation queue, report the error to
help identify the problem.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwl3945: control rate decrease
Abhijeet Kolekar [Wed, 18 Mar 2009 04:51:51 +0000 (21:51 -0700)]
iwl3945: control rate decrease

Control the rate decrease. Do not decrease the rate fast.
Use success_ratio for rate scaling :)

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwl3945: fix checkpatch.pl errors
Abhijeet Kolekar [Wed, 18 Mar 2009 04:51:50 +0000 (21:51 -0700)]
iwl3945: fix checkpatch.pl errors

Patch fixes two checkpatch.pl errors.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwl3945: use iwl_cmd_queue_free
Abhijeet Kolekar [Wed, 18 Mar 2009 04:51:49 +0000 (21:51 -0700)]
iwl3945: use iwl_cmd_queue_free

iwl_cmd_queue_free needs to be used to free up the cmd_queue,
as TFD slots for cmd_queue and tx_queue are different.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwl3945: set TFD_QUEUE_MAX to correct value
Abhijeet Kolekar [Wed, 18 Mar 2009 04:51:48 +0000 (21:51 -0700)]
iwl3945: set TFD_QUEUE_MAX to correct value

Total number of queues is 8 but only 7 of them are TX queues.
4 AC(Data) queue ,1 CMD and 2 HCCA. The HCCA queues are not used.
max_txq_num is set to maximum usable TX queues.

Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwlwifi: support 11h
Mohamed Abbas [Wed, 18 Mar 2009 04:51:47 +0000 (21:51 -0700)]
iwlwifi: support 11h

Set IEEE80211_HW_SPECTRUM_MGMT bit in hw->flags, this tell mac80211
we support spectrum mgmt.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwlcore: dont commit power command if interface is not up
Mohamed Abbas [Wed, 18 Mar 2009 04:51:45 +0000 (21:51 -0700)]
iwlcore: dont commit power command if interface is not up

If user set new power level, accept the new power level and only
send command to host if the interface is up and radio on.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwlagn: allow power level setting all the times
Mohamed Abbas [Wed, 18 Mar 2009 04:51:44 +0000 (21:51 -0700)]
iwlagn: allow power level setting all the times

allow user to set power level at all times

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwlwifi: return 0 for AMPDU_TX/RX_STOP request if NIC is going down
Wey-Yi Guy [Wed, 18 Mar 2009 04:51:43 +0000 (21:51 -0700)]
iwlwifi: return 0 for AMPDU_TX/RX_STOP request if NIC is going down

When receive IEEE80211_AMPDU_RX_STOP or IEEE80211_AMPDU_TX_STOP request
in iwl_mac_ampdu_action() from mac80211; check STATUS_EXIT_PENDING bit,
if NIC is on the way out, then return 0 back to mac80211, this can
prevent mac80211 report HW error incorrectly.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwl3945: use changed in iwl3945_mac_config
Mohamed Abbas [Wed, 18 Mar 2009 04:51:42 +0000 (21:51 -0700)]
iwl3945: use changed in iwl3945_mac_config

In function iwl3945_mac_config use changed flag to call only
the affected functions.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoiwlagn: use changed in mac_config
Mohamed Abbas [Wed, 18 Mar 2009 04:59:18 +0000 (21:59 -0700)]
iwlagn: use changed in mac_config

In function iwl_mac_config use changed flag to call only
the affected functions. This patch also allow user to cache
channel, txpower and power value when the interface is not
ready and apply the changes once the interface ready.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agonl80211: rework locking
Johannes Berg [Thu, 12 Mar 2009 08:55:09 +0000 (09:55 +0100)]
nl80211: rework locking

When I added scanning to cfg80211, we got a lock dependency like this:
rtnl --> cfg80211_mtx

nl80211, on the other hand, has the reverse lock dependency:
cfg80211_mtx --> rtnl

which clearly is a bad idea. This patch reworks nl80211 to take these
two locks in the other order to fix the possible, and easily
triggerable, deadlock.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath5k: Add tx power calibration support
Nick Kossifidis [Sun, 15 Mar 2009 20:20:35 +0000 (22:20 +0200)]
ath5k: Add tx power calibration support

* Add tx power calibration support
* Add a few tx power limits
* Hardcode default power to 12.5dB
* Disable TPC for now

v2: Address Jiri's comments

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agort2x00: Update MAINTAINERS entry: new mailinglist
Ivo van Doorn [Tue, 17 Mar 2009 10:29:19 +0000 (11:29 +0100)]
rt2x00: Update MAINTAINERS entry: new mailinglist

The rt2400-devel mailinglist will be replaced by
the new mailinglist rt2x00-users.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: Tear down aggregation sessions for suspend/resume
Sujith [Tue, 17 Mar 2009 03:20:06 +0000 (08:50 +0530)]
mac80211: Tear down aggregation sessions for suspend/resume

When the driver has been notified with a STA_REMOVE, it tears down
the internal ADDBA state. On resume, trying to initiate aggregation would
fail because mac80211 has not cleared the operational state for that <TID,STA>.
This can be fixed by tearing down the existing sessions on a suspend.

Also, the driver can initiate a new BA session when suspend is in progress.
This is fixed by marking the station as being in suspend state and
denying ADDBA requests for such STAs.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath5k: remove dummy PCI "retry timeout" fix
Bob Copeland [Tue, 17 Mar 2009 02:34:03 +0000 (22:34 -0400)]
ath5k: remove dummy PCI "retry timeout" fix

Remove the PCI retry timeout code, for all the same reasons that
Luis Rodriguez removed it for ath9k.

Changes-licensed-under: 3-Clause-BSD

Cc: Luis Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath5k: disable MIB interrupts
Bob Copeland [Tue, 17 Mar 2009 02:34:02 +0000 (22:34 -0400)]
ath5k: disable MIB interrupts

The MIB interrupt fires whenever counters overflow; however without
support for automatic noise immunity, we can sometimes get an interrupt
storm.  The get_stats() callback reads the counters anyway so we can
disable the interrupt for now until ANI is implemented.  This fixes
the issue reported in http://bugzilla.kernel.org/show_bug.cgi?id=12647.

Changes-licensed-under: 3-Clause-BSD

Cc: stable@kernel.org
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath5k: Convert chip specific calibration data to a generic format
Nick Kossifidis [Sun, 15 Mar 2009 20:17:04 +0000 (22:17 +0200)]
ath5k: Convert chip specific calibration data to a generic format

* Convert chip specific calibration data to a generic format common
for all chips

Note: We scale up power to be in 0.25dB units for all chips for
compatibility with RF5112

v2: Address Bob's and Jiri's comments

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath5k: Choose the right initvals for RF2425
Nick Kossifidis [Sun, 15 Mar 2009 20:13:39 +0000 (22:13 +0200)]
ath5k: Choose the right initvals for RF2425

* Fix a typo in initvals.c so that we use the RF2425 array for RF2425 and not RF2413

Note: This also fixes incorect pd gain overlap since RF2425 has different pd gain overlap from RF2413

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoieee80211: document DS bit usage
Johannes Berg [Sat, 14 Mar 2009 18:10:51 +0000 (19:10 +0100)]
ieee80211: document DS bit usage

I keep needing this because I'm too stupid to remember it.
Everybody else can probably remember, but who knows :)

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Keep LED on in idle state after association
Vasanthakumar Thiagarajan [Sat, 14 Mar 2009 14:29:41 +0000 (19:59 +0530)]
ath9k: Keep LED on in idle state after association

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: acquire sta_lock for station suspend/resume
Johannes Berg [Sat, 14 Mar 2009 08:42:49 +0000 (09:42 +0100)]
mac80211: acquire sta_lock for station suspend/resume

To avoid concurrent manipulations of the sta list (which shouldn't
be possible at this point, but anyway) we need to hold the sta_lock
around iterating the list.

At the same time, we do not need to iterate the list at all if
the driver doesn't want to be notified.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agonl80211: export supported commands
Johannes Berg [Sat, 14 Mar 2009 08:34:01 +0000 (09:34 +0100)]
nl80211: export supported commands

This makes nl80211 export the supported commands (command groups)
per wiphy so userspace has an idea what it can do -- this will be
required reading for userspace when we introduce auth/assoc /or/
connect for older hardware that cannot separate auth and assoc.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: Populate HT limitation with TKIP/WEP to the handler for SIOCSIWENCODE too
Vasanthakumar Thiagarajan [Fri, 13 Mar 2009 14:56:52 +0000 (20:26 +0530)]
mac80211: Populate HT limitation with TKIP/WEP to the handler for SIOCSIWENCODE too

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agowireless: radiotap updates
Johannes Berg [Fri, 13 Mar 2009 11:52:10 +0000 (12:52 +0100)]
wireless: radiotap updates

Radiotap was updated to include a "bad PLCP" flag and standardise
the "bad FCS" flag in the "flags" rather than "RX flags" field,
this patch updates Linux to that standard.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: stop queues across suspend/resume
Johannes Berg [Fri, 13 Mar 2009 10:43:36 +0000 (11:43 +0100)]
mac80211: stop queues across suspend/resume

Even though userland probably cannot submit packets, there might
still be some coming, and that's no good when the driver doesn't
expect them. Stop the queues across suspend/resume.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: fix warnings in ieee80211_if_config
Johannes Berg [Fri, 13 Mar 2009 10:19:45 +0000 (11:19 +0100)]
mac80211: fix warnings in ieee80211_if_config

The last warning can never trigger, and the explicit AP_VLAN
check is pointless if we move the config_interface check down,
in practice config_interface is required anyway.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Update copyright in all the files
Sujith [Fri, 13 Mar 2009 03:37:23 +0000 (09:07 +0530)]
ath9k: Update copyright in all the files

How time flies.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Fix bug in handling single stream stations
Sujith [Fri, 13 Mar 2009 03:26:11 +0000 (08:56 +0530)]
ath9k: Fix bug in handling single stream stations

AP mode currently sets up the dual stream capability
for all stations. This patch fixes it by checking if the
associated station supports dual stream MCS rates (8-15).
We would disregard any MCS rates above 15, since Atheros
HW supports only 0..15 rates currently, and can't receive
at rates > 15 anyway.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Fill in ack signal in TX status
Sujith [Fri, 13 Mar 2009 03:26:09 +0000 (08:56 +0530)]
ath9k: Fill in ack signal in TX status

This patch fills the ack_signal field in TX status with an appropriate
value from the TX descriptor.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Fix bug in 4K EEPROM size calculation
Sujith [Fri, 13 Mar 2009 03:26:07 +0000 (08:56 +0530)]
ath9k: Fix bug in 4K EEPROM size calculation

We should be checking with the 4K header and not the non-4K
header size.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Change return type for set_board_values()
Sujith [Fri, 13 Mar 2009 03:26:05 +0000 (08:56 +0530)]
ath9k: Change return type for set_board_values()

We always return true, checking for 'false' return value
is bogus anyway, so fix this.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Introduce a helper function for setting board gain values
Sujith [Fri, 13 Mar 2009 03:26:04 +0000 (08:56 +0530)]
ath9k: Introduce a helper function for setting board gain values

This improves readability. Handle both 4K/non-4K EEPROM
in this patch.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Move AR5416_VER_MASK to a common location
Sujith [Fri, 13 Mar 2009 03:26:02 +0000 (08:56 +0530)]
ath9k: Move AR5416_VER_MASK to a common location

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Miscellaneous EEPROM handling cleanup
Sujith [Fri, 13 Mar 2009 03:25:55 +0000 (08:55 +0530)]
ath9k: Miscellaneous EEPROM handling cleanup

Print the EEPROM version/revision on init.
Choose appropriate debug masks on error conditions,
and remove useless print messages.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: remove dummy PCI "retry timeout" fix
Luis R. Rodriguez [Thu, 12 Mar 2009 22:18:51 +0000 (18:18 -0400)]
ath9k: remove dummy PCI "retry timeout" fix

Remove the PCI retry timeout code as that was just taken from ipw2100
due to historical reasons but in reality its a no-op, additionally its
simply incorrect as each PCI devices has its own custom PCI configuration
space on PCI config space >= 0x40. Not to mention we were trying to write
0 to a place that already has 0 on it.

Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Ben Cahill <ben.m.cahill@intel.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Tested-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Add support for multiple virtual AP interfaces
Jouni Malinen [Thu, 12 Mar 2009 19:53:23 +0000 (21:53 +0200)]
ath9k: Add support for multiple virtual AP interfaces

This patch fixes the TSF offset calculation for staggered Beacon frames
and sets ATH_BCBUF back to the earlier value 4 to enable multi-BSS
configurations of up to four BSSes.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: start pending scan after probe/auth/assoc timed out
Helmut Schaa [Thu, 12 Mar 2009 13:04:34 +0000 (14:04 +0100)]
mac80211: start pending scan after probe/auth/assoc timed out

If a scan is queued in STA mode while the interface is in state direct
probe, authenticate or associate the scan is delayed until the interface
enters disabled or associated state. But in case of direct probe-,
authentication- or association- timeout sta_work will not be scheduled
anymore (without external trigger) and thus the pending scan is not
executed and prevents a new scan from being triggered (-EBUSY).

Fix this by queueing the sta work again after direct probe-, authentication-
and association- timeout.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: reduce max number of queues
Johannes Berg [Thu, 12 Mar 2009 10:16:48 +0000 (11:16 +0100)]
mac80211: reduce max number of queues

No hw/driver actually supports more than four queues right now,
and we allocate a number of things per queue which means we
waste a bit of memory. Reduce the maximum number to four to
accurately reflect what we do (and need for QoS). Even if we
had hardware supporting more queues we couldn't take advantage
of that right now anyway.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: remove ieee80211_num_regular_queues
Johannes Berg [Thu, 12 Mar 2009 22:49:28 +0000 (23:49 +0100)]
mac80211: remove ieee80211_num_regular_queues

This inline is useless and actually makes the code _longer_
rather than shorter.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoath9k: Set IEEE80211_TX_CTL_RATE_CTRL_PROBE in rate control for probe rate
Vasanthakumar Thiagarajan [Thu, 12 Mar 2009 10:02:54 +0000 (15:32 +0530)]
ath9k: Set IEEE80211_TX_CTL_RATE_CTRL_PROBE in rate control for probe rate

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agocfg80211/nl80211: remove usage of CONFIG_NL80211
Reinette Chatre [Thu, 12 Mar 2009 16:20:40 +0000 (09:20 -0700)]
cfg80211/nl80211: remove usage of CONFIG_NL80211

The scan capability added to cfg80211/nl80211 introduced a
dependency on nl80211 by cfg80211. We can thus no longer have
just cfg80211 without nl80211. Specifically, cfg80211_scan_done()
calls nl80211_send_scan_aborted() or nl80211_send_scan_done().

Now we remove the option for user to select nl80211. It will always
be compiled if user selects cfg80211.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agomac80211: ieee80211_ibss_commit() cleanup
Alina Friedrichsen [Mon, 9 Mar 2009 23:49:46 +0000 (00:49 +0100)]
mac80211: ieee80211_ibss_commit() cleanup

Don't call ieee80211_sta_find_ibss() directly, like it's done in STA
mode, so that the commit() call is more harmless respectively has
less site-effects.

Signed-off-by: Alina Friedrichsen <x-alina@gmx.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
15 years agoucc_geth: Fix three oopses in PHY {de,}initialization code
Anton Vorontsov [Fri, 27 Mar 2009 23:00:03 +0000 (16:00 -0700)]
ucc_geth: Fix three oopses in PHY {de,}initialization code

When there are no free snums, UCC ethernet should gracefully fail, but
currently it oopses this way:

  # ifconfig eth0 up
  fill_init_enet_entries: Can not get SNUM.
  ucc_geth_startup: Can not fill p_init_enet_param_shadow.
  eth0: Cannot configure net device, aborting.
  Unable to handle kernel paging request for data at address 0x00000190
  Faulting instruction address: 0xc0294c88
  Oops: Kernel access of bad area, sig: 11 [#1]
  [...]
  NIP [c0294c88] mutex_lock+0x0/0x1c
  LR [c01b6be8] phy_stop+0x20/0x70
  Call Trace:
  [efb25da0] [efb2eb60] 0xefb2eb60 (unreliable)
  [efb25db0] [c01b2058] ucc_geth_stop+0x2c/0x8c
  [efb25dd0] [c01b4194] ucc_geth_open+0x48/0x27c
  [efb25df0] [c020eec0] dev_open+0xc0/0x118
  [...]

This is because the ucc_geth_stop() routine assumes that ugeth->phydev
is always initialized by the ucc_geth_open(), while it is not in case
of errors.

If we add a check to the ucc_geth_stop(), then another oops pops up:

  Unable to handle kernel paging request for data at address 0x00000004
  Faulting instruction address: 0xc01b46a4
  Oops: Kernel access of bad area, sig: 11 [#1]
  [...]
  NIP [c01b46a4] adjust_link+0x20/0x1b4
  LR [c01b770c] phy_state_machine+0xdc/0x44c
  Call Trace:
  [ef83bf10] [c021b388] linkwatch_schedule_work+0x74/0xf8 (unreliable)
  [ef83bf40] [c01b770c] phy_state_machine+0xdc/0x44c
  [ef83bf60] [c004c13c] run_workqueue+0xb8/0x148
  [ef83bf90] [c004c870] worker_thread+0x70/0xd0
  [ef83bfd0] [c00505fc] kthread+0x48/0x84
  [ef83bff0] [c000f464] kernel_thread+0x4c/0x68
  [...]

That one happens because ucc_geth_stop() does not call phy_disconnect()
and so phylib state machine is running without any idea that a MAC has
just died.

Also, when device tree specifies fixed-link, and CONFIG_FIXED_PHY
is disabled, we'll get this oops:

  0:01 not found
  eth2: Could not attach to PHY
  eth2: Cannot initialize PHY, aborting.
  Unable to handle kernel paging request for data at address 0x00000190
  Faulting instruction address: 0xc02967d0
  Oops: Kernel access of bad area, sig: 11 [#1]
  [...]
  NIP [c02967d0] mutex_lock+0x0/0x1c
  LR [c01b6bcc] phy_stop+0x20/0x70
  Call Trace:
  [ef82be50] [efb6bb60] 0xefb6bb60 (unreliable)
  [ef82be60] [c01b2058] ucc_geth_stop+0x2c/0x8c
  [ef82be80] [c01b4194] ucc_geth_open+0x48/0x27c
  [ef82bea0] [c0210a04] dev_open+0xc0/0x118
  [ef82bec0] [c020f85c] dev_change_flags+0x84/0x1ac
  [ef82bee0] [c037b768] ic_open_devs+0x168/0x2bc
  [ef82bf20] [c037ca98] ip_auto_config+0x90/0x28c
  [ef82bf60] [c0001b9c] do_one_initcall+0x34/0x1a0
  [ef82bfd0] [c035e240] do_initcalls+0x38/0x58
  [ef82bfe0] [c035e2c4] kernel_init+0x30/0x90
  [ef82bff0] [c000f464] kernel_thread+0x4c/0x68
  [...]

And again, ucc_geth_stop() assumes that ugeth->phydev is there, while
it isn't.

This patch fixes all three oopses simply by rearranging some code:

- In ucc_geth_open(): move init_phy() call to the beginning, so
  that we only call ucc_geth_stop() with a PHY attached;
- Move phy_disconnect() call from ucc_geth_close() to
  ucc_geth_stop(), so that we'll always disconnect the PHY.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: Add missing include into include/linux/netdevice.h
Dmitri Vorobiev [Fri, 27 Mar 2009 22:55:36 +0000 (15:55 -0700)]
net: Add missing include into include/linux/netdevice.h

The inline function skb_gro_mac_header defined in include/linux/netdevice.h
makes use of page_address(). Depending on configuration options, the latter
is either defined as a macro or is declared as a function in another header
file, namely include/linux/mm.h. However, include/linux/netdevice.h does not
include include/linux/mm.h.

On MIPS, this has produced the following build error:

  CC      kernel/sysctl_check.o
In file included from include/linux/icmpv6.h:173,
                 from include/linux/ipv6.h:208,
                 from include/net/ip_vs.h:26,
                 from kernel/sysctl_check.c:6:
include/linux/netdevice.h: In function 'skb_gro_mac_header':
include/linux/netdevice.h:1132: error: implicit declaration of function
'page_address'
include/linux/netdevice.h:1133: warning: pointer/integer type mismatch
in conditional expression
make[1]: *** [kernel/sysctl_check.o] Error 1
make: *** [kernel] Error 2

The patch adds the missing include and fixes the build error.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agogianfar: only check headroom when FCB is needed
Li Yang [Fri, 27 Mar 2009 22:54:30 +0000 (15:54 -0700)]
gianfar: only check headroom when FCB is needed

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Fri, 27 Mar 2009 22:37:57 +0000 (15:37 -0700)]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

15 years agogianfar: Fix kfree(skb)
David S. Miller [Fri, 27 Mar 2009 08:10:58 +0000 (01:10 -0700)]
gianfar: Fix kfree(skb)

Noticed by Li Yang.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocxgb3: map entire Rx page, feed map+offset to Rx ring.
Divy Le Ray [Thu, 26 Mar 2009 16:39:29 +0000 (16:39 +0000)]
cxgb3: map entire Rx page, feed map+offset to Rx ring.

DMA mapping can be expensive in the presence of iommus.
Reduce the Rx iommu activity by mapping an entire page, and provide the H/W
the mapped address + offset of the current page chunk.
Reserve bits at the end of the page to track mapping references, so the page
can be unmapped.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocxgb3: differentiate portx and Tx channels
Divy Le Ray [Thu, 26 Mar 2009 16:39:24 +0000 (16:39 +0000)]
cxgb3: differentiate portx and Tx channels

Separate ports from H/W Tx channels.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocxgb3: use resource_size_t for mmio declarations
Divy Le Ray [Thu, 26 Mar 2009 16:39:19 +0000 (16:39 +0000)]
cxgb3: use resource_size_t for mmio declarations

Use resource_size_t to declare mmio start and len variables.
Print PEX error register after EEH resumed.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocxgb3: sge setup fixes
Divy Le Ray [Thu, 26 Mar 2009 16:39:14 +0000 (16:39 +0000)]
cxgb3: sge setup fixes

Enable timestamps, update delayed ack threshold for iSCSI/iWARP traffic
Remove the len flag in Tx requests. It might corrupt offload trace packets.
Update SGE context setup to avoid potential H/W misprogrammation.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocxgb3: start qset timers when setup succeeded
Divy Le Ray [Thu, 26 Mar 2009 16:39:09 +0000 (16:39 +0000)]
cxgb3: start qset timers when setup succeeded

Start queue set reclaim timers after the queue sets have been
allocated successfully.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert eth16i to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:44 +0000 (15:11 +0000)]
netdev: convert eth16i to net_device_ops

Also, get rid of unnecessary memset.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert cs89x0 to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:43 +0000 (15:11 +0000)]
netdev: convert cs89x0 to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert lp486e to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:42 +0000 (15:11 +0000)]
netdev: convert lp486e to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert ac3200 to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:41 +0000 (15:11 +0000)]
netdev: convert ac3200 to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert ni65 to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:40 +0000 (15:11 +0000)]
netdev: convert ni65 to net_device_ops

Also, use internal net_device_stats.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert ni52 to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:39 +0000 (15:11 +0000)]
netdev: convert ni52 to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert ewrk3 to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:38 +0000 (15:11 +0000)]
netdev: convert ewrk3 to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert depca to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:37 +0000 (15:11 +0000)]
netdev: convert depca to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert at1700 to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:36 +0000 (15:11 +0000)]
netdev: convert at1700 to net_device_ops

Remove unneeded memset (alloc_etherdev does it already).

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert eexpro to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:35 +0000 (15:11 +0000)]
netdev: convert eexpro to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: convert eexpress to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:34 +0000 (15:11 +0000)]
netdev: convert eexpress to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: ibmlana convert to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:33 +0000 (15:11 +0000)]
netdev: ibmlana convert to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agolance: convert to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:32 +0000 (15:11 +0000)]
lance: convert to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: smc-ultra fix netpoll
Stephen Hemminger [Thu, 26 Mar 2009 15:11:31 +0000 (15:11 +0000)]
netdev: smc-ultra fix netpoll

net_device_ops conversion left the wrong poll_controller hook.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: smc-ultra32 convert to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:30 +0000 (15:11 +0000)]
netdev: smc-ultra32 convert to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: smc9194 convert to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:29 +0000 (15:11 +0000)]
netdev: smc9194 convert to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetdev: seeq8005 convert to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:28 +0000 (15:11 +0000)]
netdev: seeq8005 convert to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agowireless: convert wavelan to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:27 +0000 (15:11 +0000)]
wireless: convert wavelan to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agowireless: convert arlan to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:26 +0000 (15:11 +0000)]
wireless: convert arlan to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agowan: convert sdla driver to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:25 +0000 (15:11 +0000)]
wan: convert sdla driver to net_device_ops

Also use internal net_device_stats

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agotokenring: convert smctr to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:24 +0000 (15:11 +0000)]
tokenring: convert smctr to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agotokenring: convert drivers to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:23 +0000 (15:11 +0000)]
tokenring: convert drivers to net_device_ops

Convert madge and proteon drivers which are really just subclasses
of tms380.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoIRDA: convert donauboe to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:22 +0000 (15:11 +0000)]
IRDA: convert donauboe to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoappletalk: convert LTPC to net_device_ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:21 +0000 (15:11 +0000)]
appletalk: convert LTPC to net_device_ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoappletalk: convert LTPC to use internal net_device_stats
Stephen Hemminger [Thu, 26 Mar 2009 15:11:20 +0000 (15:11 +0000)]
appletalk: convert LTPC to use internal net_device_stats

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoappltetalk: convert cops device to net_device ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:19 +0000 (15:11 +0000)]
appltetalk: convert cops device to net_device ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoappletalk: convert cops to internal net_device_stats
Stephen Hemminger [Thu, 26 Mar 2009 15:11:18 +0000 (15:11 +0000)]
appletalk: convert cops to internal net_device_stats

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agouml: convert network device to netdevice ops
Stephen Hemminger [Thu, 26 Mar 2009 15:11:17 +0000 (15:11 +0000)]
uml: convert network device to netdevice ops

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agouml: convert network device to internal network device stats
Stephen Hemminger [Thu, 26 Mar 2009 15:11:16 +0000 (15:11 +0000)]
uml: convert network device to internal network device stats

Convert the UML network device to use internal network device stats.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years ago3c503, smc-ultra: netdev_ops bugs
Stephen Hemminger [Thu, 26 Mar 2009 15:11:15 +0000 (15:11 +0000)]
3c503, smc-ultra: netdev_ops bugs

A couple of drivers have leftovers from netdev ops conversion.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosmsc911x: enforce read-after-write timing restriction on eeprom access
Steve Glendinning [Thu, 26 Mar 2009 07:14:36 +0000 (07:14 +0000)]
smsc911x: enforce read-after-write timing restriction on eeprom access

The LAN911x datasheet specifies a minimum delay of 45ns between a write
of E2P_DATA and any read.  This patch adds a single dummy read of
BYTE_TEST to enforce this timing constraint.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agogianfar: fix headroom expansion code
Stephen Hemminger [Fri, 27 Mar 2009 07:38:45 +0000 (00:38 -0700)]
gianfar: fix headroom expansion code

The code that was added to increase headroom was wrong.
It doesn't handle the case where gfar_add_fcb() changes the skb.
Better to do check at start of transmit (outside of lock), where
error handling is better anyway.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoaf_rose/x25: Sanity check the maximum user frame size
Alan Cox [Fri, 27 Mar 2009 07:28:21 +0000 (00:28 -0700)]
af_rose/x25: Sanity check the maximum user frame size

Otherwise we can wrap the sizes and end up sending garbage.

Closes #10423

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoappletalk: this warning can go I think
Alan Cox [Fri, 27 Mar 2009 07:27:18 +0000 (00:27 -0700)]
appletalk: this warning can go I think

Its past 2.2 ...

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobenet: use do_div() for 64 bit divide
Stephen Hemminger [Fri, 27 Mar 2009 07:25:24 +0000 (00:25 -0700)]
benet: use do_div() for 64 bit divide

The benet driver is doing a 64 bit divide, which is not supported in
Linux kernel on 32 bit architectures. The correct way to do this is to
use do_div().  Compile tested on i386 only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoxfrm: spin_lock() should be spin_unlock() in xfrm_state.c
Chuck Ebbert [Fri, 27 Mar 2009 07:22:01 +0000 (00:22 -0700)]
xfrm: spin_lock() should be spin_unlock() in xfrm_state.c

spin_lock() should be spin_unlock() in xfrm_state_walk_done().

caused by:
commit 12a169e7d8f4b1c95252d8b04ed0f1033ed7cfe2
"ipsec: Put dumpers on the dump list"

Reported-by: Marc Milgram <mmilgram@redhat.com>
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>