GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
13 years agoveth: Kill unused tx_dropped
Eric Dumazet [Wed, 6 Jul 2011 08:51:04 +0000 (01:51 -0700)]
veth: Kill unused tx_dropped

Followup to commit f82528bc13a (Exclude duplicated checking for
iface-up) : We no longer need percpu tx_dropped field.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoveth: Kill unused code label and code block.
David S. Miller [Wed, 6 Jul 2011 06:49:03 +0000 (23:49 -0700)]
veth: Kill unused code label and code block.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodcbnl: Add CEE notification
Shmulik Ravid [Tue, 5 Jul 2011 06:16:25 +0000 (06:16 +0000)]
dcbnl: Add CEE notification

This patch add an unsolicited notification of the DCBX negotiated
parameters for the CEE flavor of the DCBX protocol. The notification
message is identical to the aggregated CEE get operation and holds all
the pertinent local and peer information. The notification routine is
exported so it can be invoked by drivers supporting an embedded DCBX
stack.

Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodcbnl: Aggregated CEE GET operation
Shmulik Ravid [Tue, 5 Jul 2011 06:16:22 +0000 (06:16 +0000)]
dcbnl: Aggregated CEE GET operation

The following couple of patches add dcbnl an unsolicited notification of
the the DCB configuration for the CEE flavor of the DCBX protocol. This
is useful when the user-mode DCB client is not responsible for
conducting and resolving the DCBX negotiation (either because the DCBX
stack is embedded in the HW or the negotiation is handled by another
agent in the host), but still needs to get the negotiated parameters.
This functionality already exists for the IEEE flavor of the DCBX
protocol and these patches add it to the older CEE flavor.

The first patch extends the CEE attribute GET operation to include not
only the peer information, but also all the pertinent local
configuration (negotiated parameters). The second patch adds and export
a CEE specific notification routine.

Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Wed, 6 Jul 2011 06:23:37 +0000 (23:23 -0700)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

13 years agob44: Use pr_<level>_once and DRV_DESCRIPTION
Joe Perches [Tue, 5 Jul 2011 07:43:46 +0000 (07:43 +0000)]
b44: Use pr_<level>_once and DRV_DESCRIPTION

Convert a printk with a static to pr_<level>_once
Add and use DRV_DESCRIPTION to reduce string duplication.
Remove now unused version.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: Add GSO to vlan_features initialization
Shan Wei [Wed, 6 Jul 2011 03:44:17 +0000 (20:44 -0700)]
net: Add GSO to vlan_features initialization

Just add GSO to vlan_features initialization, and update comments.

When we set offload features, vlan_dev_fix_features() will do more check.
In vlan_dev_fix_features(), final features is decided by
features of real device and vlan_features of real device.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agopacket: Add pre-defragmentation support for ipv4 fanouts.
David S. Miller [Tue, 5 Jul 2011 08:43:20 +0000 (01:43 -0700)]
packet: Add pre-defragmentation support for ipv4 fanouts.

The skb->rxhash cannot be properly computed if the
packet is a fragment.  To alleviate this, allow the
AF_PACKET client to ask for defragmentation to be
done at demux time.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv4: Add ip_defrag() agent IP_DEFRAG_AF_PACKET.
David S. Miller [Tue, 5 Jul 2011 08:05:48 +0000 (01:05 -0700)]
ipv4: Add ip_defrag() agent IP_DEFRAG_AF_PACKET.

Elide the ICMP on frag queue timeouts unconditionally for
this user.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agopacket: Add fanout support.
David S. Miller [Tue, 5 Jul 2011 08:45:05 +0000 (01:45 -0700)]
packet: Add fanout support.

Fanouts allow packet capturing to be demuxed to a set of AF_PACKET
sockets.  Two fanout policies are implemented:

1) Hashing based upon skb->rxhash

2) Pure round-robin

An AF_PACKET socket must be fully bound before it tries to add itself
to a fanout.  All AF_PACKET sockets trying to join the same fanout
must all have the same bind settings.

Fanouts are identified (within a network namespace) by a 16-bit ID.
The first socket to try to add itself to a fanout with a particular
ID, creates that fanout.  When the last socket leaves the fanout
(which happens only when the socket is closed), that fanout is
destroyed.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agopacket: Add helpers to register/unregister ->prot_hook
David S. Miller [Mon, 4 Jul 2011 08:44:29 +0000 (01:44 -0700)]
packet: Add helpers to register/unregister ->prot_hook

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: vlan: enable soft features regardless of underlying device
Shan Wei [Wed, 6 Jul 2011 03:43:12 +0000 (20:43 -0700)]
net: vlan: enable soft features regardless of underlying device

If gso/gro feature of underlying device is turned off,
then new created vlan device never can turn gso/gro on.

Although underlying device don't support TSO, we still
should use software segments for vlan device.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'batman-adv/next' of git://git.open-mesh.org/linux-merge
David S. Miller [Wed, 6 Jul 2011 02:45:12 +0000 (19:45 -0700)]
Merge branch 'batman-adv/next' of git://git.open-mesh.org/linux-merge

13 years agovmxnet3: fix starving rx ring whenoc_skb kb fails
Shreyas Bhatewara [Tue, 5 Jul 2011 14:34:05 +0000 (14:34 +0000)]
vmxnet3: fix starving rx ring whenoc_skb kb fails

If the rx ring is completely empty, then the device may never fire an rx
interrupt. Unfortunately, the rx interrupt is what triggers populating the
rx ring with fresh buffers, so this will cause networking to lock up.

This patch replenishes the skb in recv descriptor as soon as it is
peeled off while processing rx completions. If the skb/buffer
allocation fails, existing one is recycled and the packet in hand is
dropped. This way none of the RX desc is ever left empty, thus avoiding
starvation

Signed-off-by: Scott J. Goldman <scottjg@vmware.com>
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobridge: Always flood broadcast packets
Herbert Xu [Tue, 5 Jul 2011 13:58:33 +0000 (13:58 +0000)]
bridge: Always flood broadcast packets

As is_multicast_ether_addr returns true on broadcast packets as
well, we need to explicitly exclude broadcast packets so that
they're always flooded.  This wasn't an issue before as broadcast
packets were considered to be an unregistered multicast group,
which were always flooded.  However, as we now only flood such
packets to router ports, this is no longer acceptable.

Reported-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Wed, 6 Jul 2011 01:22:39 +0000 (18:22 -0700)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next-2.6

13 years agobatman-adv: Replace version info instead of appending them
Sven Eckelmann [Tue, 5 Jul 2011 08:42:51 +0000 (10:42 +0200)]
batman-adv: Replace version info instead of appending them

The version number of modules build outside of the tree can get revision
numbers added. This is useful to give hints about the revision of a
distribution package and the used patchset. The prepended source number or
branch name doesn't add any additional information which would help to identify
problems and can therefore be omitted.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
13 years agobatman-adv: aggregation checks should use the primary_if pointer
Marek Lindner [Sun, 26 Jun 2011 19:15:13 +0000 (21:15 +0200)]
batman-adv: aggregation checks should use the primary_if pointer

The packet aggregation needs to ensure that only compatible packets
are aggregated. Some of the checks are based on the interface number
while assuming that the first interface also is the primary interface
which is not always the case.
This patch addresses the issue by using the primary_if pointer.

Reported-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
13 years agobatman-adv: broadcast primary OGM on all active hard-interfaces
Marek Lindner [Sun, 26 Jun 2011 13:26:18 +0000 (15:26 +0200)]
batman-adv: broadcast primary OGM on all active hard-interfaces

The primary interface OGM has to be broadcasted on all hard-interfaces
even if the primary interface is not the first interface (if_num = 0).
Therefore the code has to compare the originating interface with the
primary interface instead of checking the if_num.

Reported-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
13 years agobatman-adv: pass a unique flag arg instead of a sequence of bool ones
Antonio Quartulli [Wed, 29 Jun 2011 23:14:00 +0000 (01:14 +0200)]
batman-adv: pass a unique flag arg instead of a sequence of bool ones

now tt_local_event() takes a flags argument instead of a sequence of
boolean values which would grow up with the time.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
13 years agobatman-adv: add_bcast_packet_to_list() takes the sending delay as parameter
Antonio Quartulli [Sat, 25 Jun 2011 17:09:12 +0000 (19:09 +0200)]
batman-adv: add_bcast_packet_to_list() takes the sending delay as parameter

In order to make possible to use the broadcast list for delayed sendings
the "delay" parameter is now provided instead of using 1 as hardcoded
value.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
13 years agobatman-adv: unify flags for tt_change/tt_local_entry/tt_global_entry
Antonio Quartulli [Fri, 17 Jun 2011 14:11:27 +0000 (16:11 +0200)]
batman-adv: unify flags for tt_change/tt_local_entry/tt_global_entry

The tt_local_entry structure now has a 'flags' field. This helps to
unify the flags format to all the client related structures (tt_global_entry
and tt_change). The 'never_purge' field is now encoded in the 'flags' one.
To optimise the usage of this field, its length has been increased to 16bit
in order to use the eight leading bits (from 0 to 7) to store flags that
have to be sent on the wire, while the eight ending ones are used for local
computation only.

Moreover 'enum tt_change_flags' is now called 'enum tt_client_flags' and the
defined values apply to the tt_local_entry, tt_global_entry and the tt_change
'flags' field.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
13 years agobnx2x: Fix warning message during 57712/8727 initialization
Yaniv Rosner [Tue, 5 Jul 2011 01:07:16 +0000 (01:07 +0000)]
bnx2x: Fix warning message during 57712/8727 initialization

Clear warning message "MDC/MDIO access timeout" during first driver load by setting MDIO clock.
This warning has no significant meaning, since it occurs prior to the first PHY initialization.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Add autogrEEEn support
Yaniv Rosner [Tue, 5 Jul 2011 01:07:05 +0000 (01:07 +0000)]
bnx2x: Add autogrEEEn support

Add autogrEEEn support on BCM84833 and 54618se, which allows to reduce power consumption.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix BCM84833 initialization
Yaniv Rosner [Tue, 5 Jul 2011 01:06:59 +0000 (01:06 +0000)]
bnx2x: Fix BCM84833 initialization

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Fix false link indication at link partner when DAC is used
Yaniv Rosner [Tue, 5 Jul 2011 01:06:53 +0000 (01:06 +0000)]
bnx2x: Fix false link indication at link partner when DAC is used

When driver is unloaded, disable PMD in addition to TX laser, provided that the management firmware will be able to enable it back.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Reset PHY due to fan failure for 578xx
Yaniv Rosner [Tue, 5 Jul 2011 01:06:48 +0000 (01:06 +0000)]
bnx2x: Reset PHY due to fan failure for 578xx

Add hardware PHY reset action for BCM578xx when fan failure occur.
The new bnx2x_warpcore_hw_reset warps bnx2x_warpcore_power_module to fit the .hw_reset function template of the phy structure.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Add CL37 BAM for Warpcore
Yaniv Rosner [Tue, 5 Jul 2011 01:06:41 +0000 (01:06 +0000)]
bnx2x: Add CL37 BAM for Warpcore

Add CL37 BAM support according to configuration.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: Change BCM54616S to BCM54618SE
Yaniv Rosner [Tue, 5 Jul 2011 01:06:34 +0000 (01:06 +0000)]
bnx2x: Change BCM54616S to BCM54618SE

Change 1G copper PHY BCM54616S to BCM54618SE since we only have HW with latter one of the two.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobnx2x: PFC fixes
Yaniv Rosner [Tue, 5 Jul 2011 01:06:27 +0000 (01:06 +0000)]
bnx2x: PFC fixes

Set the source MAC address for PFC packets and update its status during PMF migration.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agogreth: greth_set_mac_add would corrupt the MAC address.
Kristoffer Glembo [Tue, 5 Jul 2011 04:39:10 +0000 (21:39 -0700)]
greth: greth_set_mac_add would corrupt the MAC address.

The MAC address was set using the signed char sockaddr->sa_addr
field and thus the address could be corrupted through sign extension.

Signed-off-by: Kristoffer Glembo <kristoffer@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: bind() fix error return on wrong address family
Marcus Meissner [Mon, 4 Jul 2011 01:30:29 +0000 (01:30 +0000)]
net: bind() fix error return on wrong address family

Hi,

Reinhard Max also pointed out that the error should EAFNOSUPPORT according
to POSIX.

The Linux manpages have it as EINVAL, some other OSes (Minix, HPUX, perhaps BSD) use
EAFNOSUPPORT. Windows uses WSAEFAULT according to MSDN.

Other protocols error values in their af bind() methods in current mainline git as far
as a brief look shows:
EAFNOSUPPORT: atm, appletalk, l2tp, llc, phonet, rxrpc
EINVAL: ax25, bluetooth, decnet, econet, ieee802154, iucv, netlink, netrom, packet, rds, rose, unix, x25,
No check?: can/raw, ipv6/raw, irda, l2tp/l2tp_ip

Ciao, Marcus

Signed-off-by: Marcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet/wireless: ipw2x00: Use helpers from linux/etherdevice.h
Tobias Klauser [Mon, 4 Jul 2011 00:00:22 +0000 (00:00 +0000)]
net/wireless: ipw2x00: Use helpers from linux/etherdevice.h

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: vxge: Use is_multicast_ether_addr helper
Tobias Klauser [Sun, 3 Jul 2011 23:58:04 +0000 (23:58 +0000)]
net: vxge: Use is_multicast_ether_addr helper

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: ewrk3: Use helpers from linux/etherdevice.h
Tobias Klauser [Sun, 3 Jul 2011 23:56:22 +0000 (23:56 +0000)]
net: ewrk3: Use helpers from linux/etherdevice.h

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: depca: Use helpers from linux/etherdevice.h
Tobias Klauser [Sun, 3 Jul 2011 23:55:53 +0000 (23:55 +0000)]
net: depca: Use helpers from linux/etherdevice.h

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: rionet: Use is_multicast_ether_addr
Tobias Klauser [Sun, 3 Jul 2011 23:54:54 +0000 (23:54 +0000)]
net: rionet: Use is_multicast_ether_addr

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: iseries_veth: Use is_unicast_ether_addr helper
Tobias Klauser [Sun, 3 Jul 2011 23:52:03 +0000 (23:52 +0000)]
net: iseries_veth: Use is_unicast_ether_addr helper

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: igb: Use is_multicast_ether_addr helper
Tobias Klauser [Sun, 3 Jul 2011 23:50:15 +0000 (23:50 +0000)]
net: igb: Use is_multicast_ether_addr helper

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: de4x5: Use helpers from linux/etherdevice.h
Tobias Klauser [Sun, 3 Jul 2011 23:48:13 +0000 (23:48 +0000)]
net: de4x5: Use helpers from linux/etherdevice.h

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: e1000e: Use is_multicast_ether_addr helper
Tobias Klauser [Sun, 3 Jul 2011 23:47:04 +0000 (23:47 +0000)]
net: e1000e: Use is_multicast_ether_addr helper

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoUpdate documented default values for various TCP/UDP tunables
Max Matveev [Tue, 21 Jun 2011 21:18:13 +0000 (21:18 +0000)]
Update documented default values for various TCP/UDP tunables

tcp_rmem and tcp_wmem use 1 page as default value for the minimum
amount of memory to be used, same as udp_wmem_min and udp_rmem_min.
Pages are different size on different architectures - use the right
units when describing the defaults.

Reviewed-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Max Matveev <makc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoUpdate description of net.sctp.sctp_rmem and net.sctp.sctp_wmem tunables
Max Matveev [Sun, 19 Jun 2011 22:08:10 +0000 (22:08 +0000)]
Update description of net.sctp.sctp_rmem and net.sctp.sctp_wmem tunables

sctp does not use second and third ("default" and "max") values
of sctp_rmem tunable. The format is the same as tcp_rmem
but the meaning is different so make the documentation explicit to
avoid confusion.

sctp_wmem is not used at all.

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Max Matveev <makc@redhat.com>
Reviewed-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agob44: use dev_kfree_skb() in b44_tx()
Eric Dumazet [Tue, 5 Jul 2011 00:57:10 +0000 (17:57 -0700)]
b44: use dev_kfree_skb() in b44_tx()

b44_tx() is run from softirq handler, it can use dev_kfree_skb() instead
of dev_kfree_skb_irq()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodccp ccid-2: Perform congestion-window validation
Gerrit Renker [Sun, 3 Jul 2011 15:55:03 +0000 (09:55 -0600)]
dccp ccid-2: Perform congestion-window validation

CCID-2's cwnd increases like TCP during slow-start, which has implications for
 * the local Sequence Window value (should be > cwnd),
 * the Ack Ratio value.
Hence an exponential growth, if it does not reflect the actual network
conditions, can quickly lead to instability.

This patch adds congestion-window validation (RFC2861) to CCID-2:
 * cwnd is constrained if the sender is application limited;
 * cwnd is reduced after a long idle period, as suggested in the '90 paper
   by Van Jacobson, in RFC 2581 (sec. 4.1);
 * cwnd is never reduced below the RFC 3390 initial window.

As marked in the comments, the code is actually almost a direct copy of the
TCP congestion-window-validation algorithms. By continuing this work, it may
in future be possible to use the TCP code (not possible at the moment).

The mechanism can be turned off using a module parameter. Sampling of the
currently-used window (moving-maximum) is however done constantly; this is
used to determine the expected window, which can be exploited to regulate
DCCP's Sequence Window value.

This patch also sets slow-start-after-idle (RFC 4341, 5.1), i.e. it behaves like
TCP when net.ipv4.tcp_slow_start_after_idle = 1.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
13 years agodccp ccid-2: Use existing function to test for data packets
Gerrit Renker [Sun, 3 Jul 2011 15:53:12 +0000 (09:53 -0600)]
dccp ccid-2: Use existing function to test for data packets

This replaces a switch statement with a test, using the equivalent
function dccp_data_packet(skb).  It also doubles the range of the field
`rx_num_data_pkts' by changing the type from `int' to `u32', avoiding
signed/unsigned comparison with the u16 field `dccps_r_ack_ratio'.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
13 years agodccp ccid-2: move rfc 3390 function into header file
Gerrit Renker [Sun, 3 Jul 2011 15:04:18 +0000 (09:04 -0600)]
dccp ccid-2: move rfc 3390 function into header file

This moves CCID-2's initial window function into the header file, since several
parts throughout the CCID-2 code need to call it (CCID-2 still uses RFC 3390).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Leandro Melo de Sales <leandro@ic.ufal.br>
13 years agodccp: cosmetics of info message
Gerrit Renker [Sun, 3 Jul 2011 15:51:14 +0000 (09:51 -0600)]
dccp: cosmetics of info message

Change the CCID (de)activation message to start with the
protocol name, as 'CCID' is already in there.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
13 years agodccp: combine the functionality of enqeueing and cloning
Gerrit Renker [Sun, 3 Jul 2011 15:51:29 +0000 (09:51 -0600)]
dccp: combine the functionality of enqeueing and cloning

Realising the following call pattern,
 * first dccp_entail() is called to enqueue a new skb and
 * then skb_clone() is called to transmit a clone of that skb,
this patch integrates both into the same function.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
13 years agodccp: Clean up slow-path input processing
Gerrit Renker [Sun, 3 Jul 2011 15:49:16 +0000 (09:49 -0600)]
dccp: Clean up slow-path input processing

This patch rearranges the order of statements of the slow-path input processing
(i.e. any other state than OPEN), to resolve the following issues.

 1. Dependencies: the order of statements now better matches RFC 4340, 8.5, i.e.
    step 7 is before step 9 (previously 9 was before 7), and parsing options in
    step 8 (which may consume resources) now comes after step 7.
 2. Sequence number checks are omitted if in state LISTEN/REQUEST, due to the
    note underneath the table in RFC 4340, 7.5.3.
    As a result, CCID processing is now indeed confined to OPEN/PARTOPEN states,
    i.e. congestion control is performed only on the flow of data packets. This
    avoids pathological cases of doing congestion control on those messages
    which set up and terminate the connection.
 3. Packets are now passed on to Ack Vector / CCID processing only after
    - step 7  (receive unexpected packets),
    - step 9  (receive Reset),
    - step 13 (receive CloseReq),
    - step 14 (receive Close)
    and only if the state is PARTOPEN. This simplifies CCID processing:
    - in LISTEN/CLOSED the CCIDs are non-existent;
    - in RESPOND/REQUEST the CCIDs have not yet been negotiated;
    - in CLOSEREQ and active-CLOSING the node has already closed this socket;
    - in passive-CLOSING the client is waiting for its Reset.
    In the last case, RFC 4340, 8.3 leaves it open to ignore further incoming
    data, which is the approach taken here.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
13 years agonatsemi: silence dma-debug warnings
FUJITA Tomonori [Mon, 4 Jul 2011 05:34:29 +0000 (22:34 -0700)]
natsemi: silence dma-debug warnings

This silences dma-debug warnings:

https://lkml.org/lkml/2011/6/30/341

------------[ cut here ]------------
WARNING: at /home/jimc/projects/lx/linux-2.6/lib/dma-debug.c:820
check_unmap+0x1fe/0x56a()
natsemi 0000:00:06.0: DMA-API: device driver frees DMA memory with
different size [device address=0x0000000006ef0040] [map size=1538
bytes] [unmap size=1522 bytes]
Modules linked in: pc8736x_gpio pc87360 hwmon_vid scx200_gpio nsc_gpio
scx200_hrt scx200_acb i2c_core arc4 rtl8180 mac80211 eeprom_93cx6
cfg80211 pcspkr rfkill scx200 ide_gd_mod ide_pci_generic ohci_hcd
usbcore sc1200 ide_core
Pid: 870, comm: collector Not tainted 3.0.0-rc5-sk-00080-gca56a95 #1
Call Trace:
 [<c011a556>] warn_slowpath_common+0x4a/0x5f
 [<c02565cb>] ? check_unmap+0x1fe/0x56a
 [<c011a5cf>] warn_slowpath_fmt+0x26/0x2a
 [<c02565cb>] check_unmap+0x1fe/0x56a
 [<c0256aaa>] debug_dma_unmap_page+0x53/0x5b
 [<c029d6cd>] pci_unmap_single+0x4d/0x57
 [<c029ea0a>] natsemi_poll+0x343/0x5ca
 [<c0116f41>] ? try_to_wake_up+0xea/0xfc
 [<c0122416>] ? spin_unlock_irq.clone.28+0x18/0x23
 [<c02d4667>] net_rx_action+0x3f/0xe5
 [<c011e35e>] __do_softirq+0x5b/0xd1
 [<c011e303>] ? local_bh_enable+0xa/0xa
 <IRQ>  [<c011e54b>] ? irq_exit+0x34/0x75
 [<c01034b9>] ? do_IRQ+0x66/0x79
 [<c034e869>] ? common_interrupt+0x29/0x30
 [<c0115ed0>] ? finish_task_switch.clone.118+0x31/0x72
 [<c034cb92>] ? schedule+0x3b2/0x3f1
 [<c012f4b0>] ? hrtimer_start_range_ns+0x10/0x12
 [<c012f4ce>] ? hrtimer_start_expires+0x1c/0x24
 [<c034d5aa>] ? schedule_hrtimeout_range_clock+0x8e/0xb4
 [<c012ed27>] ? update_rmtp+0x68/0x68
 [<c034d5da>] ? schedule_hrtimeout_range+0xa/0xc
 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e
 [<c017b051>] ? do_select+0x488/0x4cd
 [<c0115ee2>] ? finish_task_switch.clone.118+0x43/0x72
 [<c01157ad>] ? need_resched+0x14/0x1e
 [<c017a99e>] ? poll_freewait+0x74/0x74
 [<c01157ad>] ? need_resched+0x14/0x1e
 [<c034cbc1>] ? schedule+0x3e1/0x3f1
 [<c011e55e>] ? irq_exit+0x47/0x75
 [<c01157ad>] ? need_resched+0x14/0x1e
 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a
 [<c034dd1e>] ? need_resched+0x17/0x19
 [<c024bc12>] ? put_dec_full+0x7b/0xaa
 [<c0240060>] ? blkdev_ioctl+0x434/0x618
 [<c024bc70>] ? put_dec+0x2f/0x6d
 [<c024c6a5>] ? number.clone.1+0x10b/0x1d0
 [<c034cf8a>] ? preempt_schedule_irq+0x44/0x4a
 [<c034dd1e>] ? need_resched+0x17/0x19
 [<c024d046>] ? vsnprintf+0x225/0x264
 [<c024cea0>] ? vsnprintf+0x7f/0x264
 [<c018346f>] ? seq_printf+0x22/0x40
 [<c01a2fcc>] ? do_task_stat+0x582/0x5a3
 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e
 [<c017b1b5>] ? core_sys_select+0x11f/0x1a3
 [<c017a913>] ? poll_schedule_timeout+0x27/0x3e
 [<c01a34a1>] ? proc_tgid_stat+0xd/0xf
 [<c012357c>] ? recalc_sigpending+0x32/0x35
 [<c0123b9c>] ? __set_task_blocked+0x64/0x6a
 [<c011dfb0>] ? timespec_add_safe+0x24/0x48
 [<c0123449>] ? spin_unlock_irq.clone.16+0x18/0x23
 [<c017b3a1>] ? sys_pselect6+0xe5/0x13e
 [<c034dd65>] ? syscall_call+0x7/0xb
 [<c0340000>] ? rpc_clntdir_depopulate+0x26/0x30
---[ end trace 180dcac41a50938b ]---

Reported-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: sh_eth: remove __flush_purge_region
Yoshihiro Shimoda [Thu, 30 Jun 2011 22:52:13 +0000 (22:52 +0000)]
net: sh_eth: remove __flush_purge_region

It is a function of SuperH architecture. There is no good to use
the function on a driver generally. So, the driver uses
dma_map_single() instead of __flush_purge_region.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoaf_econet: Use current logging styles and neatening
Joe Perches [Sun, 3 Jul 2011 08:28:33 +0000 (08:28 +0000)]
af_econet: Use current logging styles and neatening

Use pr_fmt() without KBUILD_MODNAME to allow AUN and econet prefixes.
Convert printks with KERN_DEBUG to pr_debug.
Hoist assigns from if.
80 column wrapping.
Move open braces to end of line.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetpoll: Remove wrapper function netpoll_poll
Joe Perches [Thu, 30 Jun 2011 15:08:58 +0000 (15:08 +0000)]
netpoll: Remove wrapper function netpoll_poll

Too trivial to live.

cc: WANG Cong <amwang@redhat.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetpoll: Remove unused EXPORT_SYMBOLs of netpoll_poll and netpoll_poll_dev
Joe Perches [Thu, 30 Jun 2011 15:08:57 +0000 (15:08 +0000)]
netpoll: Remove unused EXPORT_SYMBOLs of netpoll_poll and netpoll_poll_dev

Unused symbols waste space.

Commit 0e34e93177fb
"(netpoll: add generic support for bridge and bonding devices)"
added the symbol more than a year ago with the promise of "future use".

Because it is so far unused, remove it for now.
It can be easily readded if or when it actually needs to be used.

cc: WANG Cong <amwang@redhat.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: 8139too: Initial necessary vlan_features to support vlan
Shan Wei [Fri, 1 Jul 2011 22:06:44 +0000 (22:06 +0000)]
net: 8139too: Initial necessary vlan_features to support vlan

Offload setting of vlan device requires
vlan_features to be initialized.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoFix call trace when interrupts are disabled while sleeping function kzalloc is called
Shyam Iyer [Tue, 28 Jun 2011 08:58:05 +0000 (08:58 +0000)]
Fix call trace when interrupts are disabled while sleeping function kzalloc is called

request_threaded irq will call kzalloc that can sleep. Initializing the flags variable outside of spin_lock_irqsave/restore in bnad_mbox_irq_alloc will avoid call traces like below.

Jun 27 08:15:24 home-t710 kernel: [11735.634550] Brocade 10G Ethernet driver
Jun 27 08:15:24 home-t710 kernel: [11735.634590] bnad_pci_probe : (0xffff880427f3d000, 0xffffffffa020f3e0) PCI Func : (2)
Jun 27 08:15:24 home-t710 kernel: [11735.637677] bna 0000:82:00.2: PCI INT A -> GSI 66 (level, low) -> IRQ 66
Jun 27 08:15:24 home-t710 kernel: [11735.638290] bar0 mapped to ffffc90014980000, len 262144
Jun 27 08:15:24 home-t710 kernel: [11735.638732] BUG: sleeping function called from invalid context at mm/slub.c:847
Jun 27 08:15:24 home-t710 kernel: [11735.638736] in_atomic(): 0, irqs_disabled(): 1, pid: 11243, name: insmod
Jun 27 08:15:24 home-t710 kernel: [11735.638740] Pid: 11243, comm: insmod Not tainted 3.0.0-rc4+ #6
Jun 27 08:15:24 home-t710 kernel: [11735.638743] Call Trace:
Jun 27 08:15:24 home-t710 kernel: [11735.638755]  [<ffffffff81046427>] __might_sleep+0xeb/0xf0
Jun 27 08:15:24 home-t710 kernel: [11735.638766]  [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638773]  [<ffffffff8111201c>] kmem_cache_alloc_trace+0x43/0xd8
Jun 27 08:15:24 home-t710 kernel: [11735.638782]  [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638787]  [<ffffffff810ab791>] request_threaded_irq+0xa1/0x113
Jun 27 08:15:24 home-t710 kernel: [11735.638798]  [<ffffffffa020f0c0>] bnad_pci_probe+0x612/0x8e5 [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638807]  [<ffffffffa01fe469>] ? netif_wake_queue+0x3d/0x3d [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638816]  [<ffffffff81482ef4>] ? _raw_spin_unlock_irqrestore+0x17/0x19
Jun 27 08:15:24 home-t710 kernel: [11735.638822]  [<ffffffff8124d17a>] local_pci_probe+0x44/0x75
Jun 27 08:15:24 home-t710 kernel: [11735.638826]  [<ffffffff8124dc06>] pci_device_probe+0xd0/0xff
Jun 27 08:15:24 home-t710 kernel: [11735.638832]  [<ffffffff812ef8ab>] driver_probe_device+0x131/0x213
Jun 27 08:15:24 home-t710 kernel: [11735.638836]  [<ffffffff812ef9e7>] __driver_attach+0x5a/0x7e
Jun 27 08:15:24 home-t710 kernel: [11735.638840]  [<ffffffff812ef98d>] ? driver_probe_device+0x213/0x213
Jun 27 08:15:24 home-t710 kernel: [11735.638844]  [<ffffffff812ee933>] bus_for_each_dev+0x53/0x89
Jun 27 08:15:24 home-t710 kernel: [11735.638848]  [<ffffffff812ef48a>] driver_attach+0x1e/0x20
Jun 27 08:15:24 home-t710 kernel: [11735.638852]  [<ffffffff812ef0ae>] bus_add_driver+0xd1/0x224
Jun 27 08:15:24 home-t710 kernel: [11735.638858]  [<ffffffffa01b8000>] ? 0xffffffffa01b7fff
Jun 27 08:15:24 home-t710 kernel: [11735.638862]  [<ffffffff812efe57>] driver_register+0x98/0x105
Jun 27 08:15:24 home-t710 kernel: [11735.638866]  [<ffffffffa01b8000>] ? 0xffffffffa01b7fff
Jun 27 08:15:24 home-t710 kernel: [11735.638871]  [<ffffffff8124e4c9>] __pci_register_driver+0x56/0xc1
Jun 27 08:15:24 home-t710 kernel: [11735.638875]  [<ffffffffa01b8000>] ? 0xffffffffa01b7fff
Jun 27 08:15:24 home-t710 kernel: [11735.638884]  [<ffffffffa01b8040>] bnad_module_init+0x40/0x60 [bna]
Jun 27 08:15:24 home-t710 kernel: [11735.638892]  [<ffffffff81002099>] do_one_initcall+0x7f/0x136
Jun 27 08:15:24 home-t710 kernel: [11735.638899]  [<ffffffff8108608b>] sys_init_module+0x88/0x1d0
Jun 27 08:15:24 home-t710 kernel: [11735.638906]  [<ffffffff81489682>] system_call_fastpath+0x16/0x1b
Jun 27 08:15:24 home-t710 kernel: [11735.639642] bnad_pci_probe : (0xffff880427f3e000, 0xffffffffa020f3e0) PCI Func : (3)
Jun 27 08:15:24 home-t710 kernel: [11735.639665] bna 0000:82:00.3: PCI INT A -> GSI 66 (level, low) -> IRQ 66
Jun 27 08:15:24 home-t710 kernel: [11735.639735] bar0 mapped to ffffc90014400000, len 262144

Signed-off-by: Shyam Iyer <shyam_iyer@dell.com>
Acked-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqlge:Version change to v1.00.00.29
Jitendra Kalsaria [Thu, 30 Jun 2011 10:02:07 +0000 (10:02 +0000)]
qlge:Version change to v1.00.00.29

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqlge: Fix printk priority so chip fatal errors are always reported.
Jitendra Kalsaria [Thu, 30 Jun 2011 10:02:06 +0000 (10:02 +0000)]
qlge: Fix printk priority so chip fatal errors are always reported.

Precedence of the printk should be at higher level so chip fatal
errors are always reported.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqlge:Fix crash caused by mailbox execution on wedged chip.
Jitendra Kalsaria [Thu, 30 Jun 2011 10:02:05 +0000 (10:02 +0000)]
qlge:Fix crash caused by mailbox execution on wedged chip.

When we are in a recover process from a chip fatal error,
driver should skip over execution of mailbox commands during
resetting chip.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoxfrm4: Don't call icmp_send on local error
Steffen Klassert [Wed, 29 Jun 2011 23:20:41 +0000 (23:20 +0000)]
xfrm4: Don't call icmp_send on local error

Calling icmp_send() on a local message size error leads to
an incorrect update of the path mtu. So use ip_local_error()
instead to notify the socket about the error.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv4: Don't use ufo handling on later transformed packets
Steffen Klassert [Wed, 29 Jun 2011 23:19:32 +0000 (23:19 +0000)]
ipv4: Don't use ufo handling on later transformed packets

We might call ip_ufo_append_data() for packets that will be IPsec
transformed later. This function should be used just for real
udp packets. So we check for rt->dst.header_len which is only
nonzero on IPsec handling and call ip_ufo_append_data() just
if rt->dst.header_len is zero.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoxfrm: Remove family arg from xfrm_bundle_ok
Steffen Klassert [Wed, 29 Jun 2011 23:18:20 +0000 (23:18 +0000)]
xfrm: Remove family arg from xfrm_bundle_ok

The family arg is not used any more, so remove it.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv6: Don't put artificial limit on routing table size.
David S. Miller [Fri, 24 Jun 2011 22:25:00 +0000 (15:25 -0700)]
ipv6: Don't put artificial limit on routing table size.

IPV6, unlike IPV4, doesn't have a routing cache.

Routing table entries, as well as clones made in response
to route lookup requests, all live in the same table.  And
all of these things are together collected in the destination
cache table for ipv6.

This means that routing table entries count against the garbage
collection limits, even though such entries cannot ever be reclaimed
and are added explicitly by the administrator (rather than being
created in response to lookups).

Therefore it makes no sense to count ipv6 routing table entries
against the GC limits.

Add a DST_NOCOUNT destination cache entry flag, and skip the counting
if it is set.  Use this flag bit in ipv6 when adding routing table
entries.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv6: Don't change dst->flags using assignments.
David S. Miller [Fri, 24 Jun 2011 22:23:34 +0000 (15:23 -0700)]
ipv6: Don't change dst->flags using assignments.

This blows away any flags already set in the entry.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years ago6pack,mkiss: fix lock inconsistency
Arnd Bergmann [Sat, 2 Jul 2011 00:30:00 +0000 (17:30 -0700)]
6pack,mkiss: fix lock inconsistency

Lockdep found a locking inconsistency in the mkiss_close function:

> kernel: [ INFO: inconsistent lock state ]
> kernel: 2.6.39.1 #3
> kernel: ---------------------------------
> kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage.
> kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes:
> kernel: (disc_data_lock){+++?.-}, at: [<ffffffffa018552b>] mkiss_close+0x1b/0x90 [mkiss]
> kernel: {IN-SOFTIRQ-R} state was registered at:

The message hints that disc_data_lock is aquired with softirqs disabled,
but does not itself disable softirqs, which can in rare circumstances
lead to a deadlock.
The same problem is present in the 6pack driver, this patch fixes both
by using write_lock_bh instead of write_lock.

Reported-by: Bernard F6BVP <f6bvp@free.fr>
Tested-by: Bernard F6BVP <f6bvp@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ralf Baechle<ralf@linux-mips.org>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'for-next' of git://git2.kernel.org/pub/scm/linux/kernel/git/lowpan...
David S. Miller [Fri, 1 Jul 2011 23:16:48 +0000 (16:16 -0700)]
Merge branch 'for-next' of git://git2./linux/kernel/git/lowpan/lowpan

13 years agonet: rds: fix const array syntax
Greg Dietsche [Fri, 1 Jul 2011 23:16:19 +0000 (16:16 -0700)]
net: rds: fix const array syntax

Correct the syntax so that both array and pointer are const.

Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agox25: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:13 +0000 (09:43 +0000)]
x25: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows 80 column line reflowing.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosunrpc: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:12 +0000 (09:43 +0000)]
sunrpc: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows 80 column line reflowing.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agosctp: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:11 +0000 (09:43 +0000)]
sctp: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows useless break;s removed after returns
and a comment added to an unnecessary default: break;
because of a dubious gcc warning.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetrom: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:10 +0000 (09:43 +0000)]
netrom: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows code on same line as case moved
to separate lines and a "/* Fallthrough */" comment
added where appropriate.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agolapb: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:09 +0000 (09:43 +0000)]
lapb: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows 80 column reflowing.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv6: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:08 +0000 (09:43 +0000)]
ipv6: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows 80 column reflowing,
removal of a useless break after return, and moving
open brace after case instead of separate line.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv4: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:07 +0000 (09:43 +0000)]
ipv4: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows no difference.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonetfilter: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:06 +0000 (09:43 +0000)]
netfilter: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows miscellaneous 80 column wrapping,
comment reflowing and a comment for a useless gcc
warning for an otherwise unused default: case.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipconfig: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:05 +0000 (09:43 +0000)]
ipconfig: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows miscellaneous 80 column wrapping.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoeconet: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:04 +0000 (09:43 +0000)]
econet: Reduce switch/case indent

Make the case labels the same indent as the switch.

Simplify a default case / return (unreached)
Remove unnecessary break after return.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agodecnet: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:03 +0000 (09:43 +0000)]
decnet: Reduce switch/case indent

Make the case labels the same indent as the switch.

git diff -w shows differences for line wrapping.
(fit multiple lines to 80 columns, join where possible)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoappletalk: Reduce switch/case indent
Joe Perches [Fri, 1 Jul 2011 09:43:02 +0000 (09:43 +0000)]
appletalk: Reduce switch/case indent

Make the case labels the same indent as the switch.

(git diff -w net/appletalk shows no difference)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agortnl: provide link dump consistency info
Thomas Graf [Tue, 21 Jun 2011 03:11:20 +0000 (03:11 +0000)]
rtnl: provide link dump consistency info

This patch adds a change sequence counter to each net namespace
which is bumped whenever a netdevice is added or removed from
the list. If such a change occurred while a link dump took place,
the dump will have the NLM_F_DUMP_INTR flag set in the first
message which has been interrupted and in all subsequent messages
of the same dump.

Note that links may still be modified or renamed while a dump is
taking place but we can guarantee for userspace to receive a
complete list of links and not miss any.

Testing:
I have added 500 VLAN netdevices to make sure the dump is split
over multiple messages. Then while continuously dumping links in
one process I also continuously deleted and re-added a dummy
netdevice in another process. Multiple dumps per seconds have
had the NLM_F_DUMP_INTR flag set.

I guess we can wait for Johannes patch to hit net-next via the
wireless tree.  I just wanted to give this some testing right away.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Fri, 1 Jul 2011 08:52:02 +0000 (01:52 -0700)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-2.6

13 years agonet: de4x5: Omit check for multicast bit in netdev_for_each_mc_addr
Tobias Klauser [Thu, 30 Jun 2011 21:37:52 +0000 (21:37 +0000)]
net: de4x5: Omit check for multicast bit in netdev_for_each_mc_addr

There is no need to check for the address being a multicast address in
the netdev_for_each_mc_addr loop, so remove it.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: clear intr bit in be_probe()
Sathya Perla [Wed, 29 Jun 2011 23:33:37 +0000 (23:33 +0000)]
be2net: clear intr bit in be_probe()

It may be set in the card while the driver is probed by kdump kernel after a
crash.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: create/destroy rx-queues on interface open/close
Sathya Perla [Wed, 29 Jun 2011 23:33:17 +0000 (23:33 +0000)]
be2net: create/destroy rx-queues on interface open/close

On some skews, the BE card sends pause frames (and not drop pkts) if there are
no more posted buffers available for packet reception.  This behaviour has a
side effect: When an interface is disabled, buffers are no longer posted on the
corresponding RX rings. All broadcast and multicast traffic being received on
the port will quickly fill up the PMEM and cause pause push back. As the PMEM
is shared by both the ports, all traffic being received on the other (enabled)
port also gets stalled.
The fix is to destroy RX rings when the interface is disabled. If there is no
RX ring match in the RXF lookup, the packets are discarded and so don't hog the
PMEM.
The RXQ creation cmd must now use MCC instead of MBOX as they are are called
post MCC queue creation.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobe2net: fix certain cmd failure logging
Sathya Perla [Wed, 29 Jun 2011 23:32:56 +0000 (23:32 +0000)]
be2net: fix certain cmd failure logging

Some (older)versions of cards/fw may not recognize certain cmds and
return illegal/unsupported errors. As long as the driver can handle
this gracefully there is no need to log an error msg.
Also finetuned 2 existing error log messages.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoqlcnic: add external loopback support
Amit Kumar Salecha [Wed, 29 Jun 2011 20:00:50 +0000 (20:00 +0000)]
qlcnic: add external loopback support

o Add external loopback test in self test:
  - Send set external loopback mode request to fw.
     To quiscent other storage functions.
  - Perform test
  - Send unset loopback mode request to fw.

o Rename ilb to lb.
o Update driver version 5.0.20.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: add external loopback test in ethtool self test
Amit Kumar Salecha [Wed, 29 Jun 2011 20:00:49 +0000 (20:00 +0000)]
net: add external loopback test in ethtool self test

External loopback test can be performed by application without any driver
support on normal Ethernet cards.
But on CNA devices, where multiple functions share same physical port.
Here internal loopback test and external loopback test can be initiated by
multiple functions at same time. To co exist all functions, firmware need
to regulate what test can be run by which function. So before performing external
loopback test, command need to send to firmware, which will quiescent other functions.

User may not want to run external loopback test always. As special cable need to be
connected for this test.
So adding explicit flag in ethtool self test, which will specify interface
to perform external loopback test.
 ETH_TEST_FL_EXTERNAL_LB: Application set to request external loopback test
 ETH_TEST_FL_EXTERNAL_LB_DONE: Driver ack if test performed

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: ucc_geth: Omit check for multicast bit in netdev_for_each_mc_addr
Tobias Klauser [Wed, 29 Jun 2011 02:16:33 +0000 (02:16 +0000)]
net: ucc_geth: Omit check for multicast bit in netdev_for_each_mc_addr

There is no need to check for the address being a multicast address in
the netdev_for_each_mc_addr loop, so remove it.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: iseries_veth: Omit check for multicast bit in netdev_for_each_mc_addr
Tobias Klauser [Wed, 29 Jun 2011 02:15:35 +0000 (02:15 +0000)]
net: iseries_veth: Omit check for multicast bit in netdev_for_each_mc_addr

There is no need to check for the address being a multicast address in
the netdev_for_each_mc_addr loop, so remove it.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: depca: Omit check for multicast bit in netdev_for_each_mc_addr
Tobias Klauser [Wed, 29 Jun 2011 02:15:15 +0000 (02:15 +0000)]
net: depca: Omit check for multicast bit in netdev_for_each_mc_addr

There is no need to check for the address being a multicast address in
the netdev_for_each_mc_addr loop, so remove it.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet: am79c961a: Omit check for multicast bit in netdev_for_each_mc_addr
Tobias Klauser [Wed, 29 Jun 2011 02:14:46 +0000 (02:14 +0000)]
net: am79c961a: Omit check for multicast bit in netdev_for_each_mc_addr

There is no need to check for the address being a multicast address in
the netdev_for_each_mc_addr loop, so remove it.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agowanxl: remove a stray irq enable
Dan Carpenter [Tue, 28 Jun 2011 20:29:51 +0000 (20:29 +0000)]
wanxl: remove a stray irq enable

This is error path calls unlock_irq() where we haven't disabled the
IRQs.  The comment says that this error path can never happen.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoExclude duplicated checking for iface-up. This flags is checked in 'is_skb_forwardabl...
Alexander Smirnov [Tue, 28 Jun 2011 03:30:44 +0000 (03:30 +0000)]
Exclude duplicated checking for iface-up. This flags is checked in 'is_skb_forwardable' function, which is subroutine of 'dev_forward_skb'.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agojme: Cleanup PM operations after using new PM API
Guo-Fu Tseng [Tue, 28 Jun 2011 01:38:30 +0000 (01:38 +0000)]
jme: Cleanup PM operations after using new PM API

1. Using enum name instead of numeric value.
2. device_set_wakeup_enable expect bool argument
   adding !!() to the argument to be passed.
3. Remove non-jme-hardware related operations from
   jme_clear_pm()
4. Reuse jme_clear_pm() in jme_resume() and jme_powersave_phy()

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agojme: Fix compile warning introduced by new pm macro
Guo-Fu Tseng [Mon, 27 Jun 2011 19:23:34 +0000 (19:23 +0000)]
jme: Fix compile warning introduced by new pm macro

SIMPLE_DEV_PM_OPS is using SET_SYSTEM_SLEEP_PM_OPS
and SET_SYSTEM_SLEEP_PM_OPS is empty when CONFIG_PM_SLEEP
is not defined.

Switching #ifdef CONFIG_PM to #ifdef CONFIG_PM_SLEEP

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agocan: remove useless defaults in Kconfig
Kurt Van Dijck [Mon, 27 Jun 2011 05:00:13 +0000 (05:00 +0000)]
can: remove useless defaults in Kconfig

There's no need for "default N' (or 'default n') as it's default.

Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoenic: Add support to configure hardware interrupt coalesce timers in a platform indep...
Vasanthy Kolluri [Fri, 17 Jun 2011 07:56:48 +0000 (07:56 +0000)]
enic: Add support to configure hardware interrupt coalesce timers in a platform independent way

enic driver and the underlying hardware use different units for representing the interrupt coalesce timer.
Driver converts the interrupt coalesce timer in usec to hardware cycles while setting the relevant hardware
registers. The conversion factor can be different for each of the adapter hardware types. So it is dynamically
learnt from the adapter firmware using the devcmd CMD_INTR_COAL_CONVERT. This allows the driver to configure
the hardware interrupt coalesce timers in a platform independent way.

Signed-off-by: Danny Guo <dannguo@cisco.com>
Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: David Wang <dwang2@cisco.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
13 years agovirtio-net: per cpu 64 bit stats (v2)
stephen hemminger [Wed, 15 Jun 2011 06:36:29 +0000 (06:36 +0000)]
virtio-net: per cpu 64 bit stats (v2)

Use per-cpu variables to maintain 64 bit statistics.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
13 years agoxen/netback: Add module alias for autoloading
Bastian Blank [Thu, 30 Jun 2011 18:19:09 +0000 (11:19 -0700)]
xen/netback: Add module alias for autoloading

Add xen-backend:vif module alias to the xen-netback module. This allows
automatic loading of the module.

Signed-off-by: Bastian Blank <waldi@debian.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>