git.stricted.de - GitHub/LineageOS/android_kernel_motorola

net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'

If this sanity check fails, we must free 'rss_indir'. Otherwise there is a
memory leak.
'goto err' as done in the other error handling paths to fix it.

Fixes: 46a3df9f9718 ("net: hns3: Fix for setting rss_size incorrectly")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: Fix clock resource by adding an optional bus clock

On Armada 7K/8K we need to explicitly enable the bus clock. The bus clock
is optional because not all the SoCs need them but at least for Armada
7K/8K it is actually mandatory.

The binding documentation is updating accordingly.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r8152: add Linksys USB3GIGV1 id

This linksys dongle by default comes up in cdc_ether mode.
This patch allows r8152 to claim the device:
Bus 002 Device 002: ID 13b1:0041 Linksys

Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: fix l2tp_eth module loading

The l2tp_eth module crashes if its netlink callbacks are run when the
pernet data aren't initialised.

We should normally register_pernet_device() before the genl callbacks.
However, the pernet data only maintain a list of l2tpeth interfaces,
and this list is never used. So let's just drop pernet handling
instead.

Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'erspan-fixes'

Xin Long says:

====================
ip_gre: a bunch of fixes for erspan

This patchset is to fix some issues that could cause 0 or low
performance, and even unexpected truncated packets on erspan.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ip_gre: erspan device should keep dst

The patch 'ip_gre: ipgre_tap device should keep dst' fixed
the issue ipgre_tap dev mtu couldn't be updated in tx path.

The same fix is needed for erspan as well.

Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_gre: set tunnel hlen properly in erspan_tunnel_init

According to __gre_tunnel_init, tunnel->hlen should be set as the
headers' length between inner packet and outer iphdr.

It would be used especially to calculate a proper mtu when updating
mtu in tnl_update_pmtu. Now without setting it, a bigger mtu value
than expected would be updated, which hurts performance a lot.

This patch is to fix it by setting tunnel->hlen with:
tunnel->tun_hlen + tunnel->encap_hlen + sizeof(struct erspanhdr)

Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_gre: check packet length and mtu correctly in erspan_xmit

As a ARPHRD_ETHER device, skb->len in erspan_xmit is the length
of the whole ether packet. So before checking if a packet size
exceeds the mtu, skb->len should subtract dev->hard_header_len.

Otherwise, all packets with max size according to mtu would be
trimmed to be truncated packet.

Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_gre: get key from session_id correctly in erspan_rcv

erspan only uses the first 10 bits of session_id as the key to look
up the tunnel. But in erspan_rcv, it missed 'session_id & ID_MASK'
when getting the key from session_id.

If any other flag is also set in session_id in a packet, it would
fail to find the tunnel due to incorrect key in erspan_rcv.

This patch is to add 'session_id & ID_MASK' there and also remove
the unnecessary variable session_id.

Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: use only positive error codes in messages

In commit e3a77561e7d32 ("tipc: split up function tipc_msg_eval()"),
we have updated the function tipc_msg_lookup_dest() to set the error
codes to negative values at destination lookup failures. Thus when
the function sets the error code to -TIPC_ERR_NO_NAME, its inserted
into the 4 bit error field of the message header as 0xf instead of
TIPC_ERR_NO_NAME (1). The value 0xf is an unknown error code.

In this commit, we set only positive error code.

Fixes: e3a77561e7d32 ("tipc: split up function tipc_msg_eval()")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ppp: fix __percpu annotation

Move sparse annotation right after pointer type.

Fixes sparse warning:
    drivers/net/ppp/ppp_generic.c:1422:13: warning: incorrect type in initializer (different address spaces)
    drivers/net/ppp/ppp_generic.c:1422:13:    expected void const [noderef] <asn:3>*__vpp_verify
    drivers/net/ppp/ppp_generic.c:1422:13:    got int *<noident>
    ...

Fixes: e5dadc65f9e0 ("ppp: Fix false xmit recursion detect with two ppp devices")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'udp-fix-early-demux-for-mcast-packets'

Paolo Abeni says:

====================
udp: fix early demux for mcast packets

Currently the early demux callbacks do not perform source address validation.
This is not an issue for TCP or UDP unicast, where the early demux
is only allowed for connected sockets and the source address is validated
for the first packet and never change.

The UDP protocol currently allows early demux also for unconnected multicast
sockets, and we are not currently doing any validation for them, after that
the first packet lands on the socket: beyond ignoring the rp_filter - if
enabled - any kind of martian sources are also allowed.

This series addresses the issue allowing the early demux callback to return an
error code, and performing the proper checks for unconnected UDP multicast
sockets before leveraging the rx dst cache.

Alternatively we could disable the early demux for unconnected mcast sockets,
but that would cause relevant performance regression - around 50% - while with
this series, with full rp_filter in place, we keep the regression to a more
moderate level.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

udp: perform source validation for mcast early demux

The UDP early demux can leverate the rx dst cache even for
multicast unconnected sockets.

In such scenario the ipv4 source address is validated only on
the first packet in the given flow. After that, when we fetch
the dst entry from the socket rx cache, we stop enforcing
the rp_filter and we even start accepting any kind of martian
addresses.

Disabling the dst cache for unconnected multicast socket will
cause large performace regression, nearly reducing by half the
max ingress tput.

Instead we factor out a route helper to completely validate an
skb source address for multicast packets and we call it from
the UDP early demux for mcast packets landing on unconnected
sockets, after successful fetching the related cached dst entry.

This still gives a measurable, but limited performance
regression:

rp_filter = 0 rp_filter = 1
edmux disabled: 1182 Kpps 1127 Kpps
edmux before: 2238 Kpps 2238 Kpps
edmux after: 2037 Kpps 2019 Kpps

The above figures are on top of current net tree.
Applying the net-next commit 6e617de84e87 ("net: avoid a full
fib lookup when rp_filter is disabled.") the delta with
rp_filter == 0 will decrease even more.

Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv4: early demux can return an error code

Currently no error is emitted, but this infrastructure will
used by the next patch to allow source address validation
for mcast sockets.
Since early demux can do a route lookup and an ipv4 route
lookup can return an error code this is consistent with the
current ipv4 route infrastructure.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_tunnel: update mtu properly for ARPHRD_ETHER tunnel device in tx path

Now when updating mtu in tx path, it doesn't consider ARPHRD_ETHER tunnel
device, like ip6gre_tap tunnel, for which it should also subtract ether
header to get the correct mtu.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_gre: ip6gre_tap device should keep dst

The patch 'ip_gre: ipgre_tap device should keep dst' fixed
a issue that ipgre_tap mtu couldn't be updated in tx path.

The same fix is needed for ip6gre_tap as well.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_gre: ipgre_tap device should keep dst

Without keeping dst, the tunnel will not update any mtu/pmtu info,
since it does not have a dst on the skb.

Reproducer:
client(ipgre_tap1 - eth1) <-----> (eth1 - ipgre_tap1)server

After reducing eth1's mtu on client, then perforamnce became 0.

This patch is to netif_keep_dst in gre_tap_init, as ipgre does.

Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: do not proceed if dump's start() errs

Drivers that use the start method for netlink dumping rely on dumpit not
being called if start fails. For example, ila_xlat.c allocates memory
and assigns it to cb->args[0] in its start() function. It might fail to
do that and return -ENOMEM instead. However, even when returning an
error, dumpit will be called, which, in the example above, quickly
dereferences the memory in cb->args[0], which will OOPS the kernel. This
is but one example of how this goes wrong.

Since start() has always been a function with an int return type, it
therefore makes sense to use it properly, rather than ignoring it. This
patch thus returns early and does not call dumpit() when start() fails.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2017-09-28' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-fixes-2017-09-28

Misc. fixes for mlx5 drivers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: Set sk_prot_creator when cloning sockets to the right proto

sk->sk_prot and sk->sk_prot_creator can differ when the app uses
IPV6_ADDRFORM (transforming an IPv6-socket to an IPv4-one).
Which is why sk_prot_creator is there to make sure that sk_prot_free()
does the kmem_cache_free() on the right kmem_cache slab.

Now, if such a socket gets transformed back to a listening socket (using
connect() with AF_UNSPEC) we will allocate an IPv4 tcp_sock through
sk_clone_lock() when a new connection comes in. But sk_prot_creator will
still point to the IPv6 kmem_cache (as everything got copied in
sk_clone_lock()). When freeing, we will thus put this
memory back into the IPv6 kmem_cache although it was allocated in the
IPv4 cache. I have seen memory corruption happening because of this.

With slub-debugging and MEMCG_KMEM enabled this gives the warning
"cache_from_obj: Wrong slab cache. TCPv6 but object is from TCP"

A C-program to trigger this:

void main(void)
{
        int fd = socket(AF_INET6, SOCK_STREAM, IPPROTO_TCP);
        int new_fd, newest_fd, client_fd;
        struct sockaddr_in6 bind_addr;
        struct sockaddr_in bind_addr4, client_addr1, client_addr2;
        struct sockaddr unsp;
        int val;

        memset(&bind_addr, 0, sizeof(bind_addr));
        bind_addr.sin6_family = AF_INET6;
        bind_addr.sin6_port = ntohs(42424);

        memset(&client_addr1, 0, sizeof(client_addr1));
        client_addr1.sin_family = AF_INET;
        client_addr1.sin_port = ntohs(42424);
        client_addr1.sin_addr.s_addr = inet_addr("127.0.0.1");

        memset(&client_addr2, 0, sizeof(client_addr2));
        client_addr2.sin_family = AF_INET;
        client_addr2.sin_port = ntohs(42421);
        client_addr2.sin_addr.s_addr = inet_addr("127.0.0.1");

        memset(&unsp, 0, sizeof(unsp));
        unsp.sa_family = AF_UNSPEC;

        bind(fd, (struct sockaddr *)&bind_addr, sizeof(bind_addr));

        listen(fd, 5);

        client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
        connect(client_fd, (struct sockaddr *)&client_addr1, sizeof(client_addr1));
        new_fd = accept(fd, NULL, NULL);
        close(fd);

        val = AF_INET;
        setsockopt(new_fd, SOL_IPV6, IPV6_ADDRFORM, &val, sizeof(val));

        connect(new_fd, &unsp, sizeof(unsp));

        memset(&bind_addr4, 0, sizeof(bind_addr4));
        bind_addr4.sin_family = AF_INET;
        bind_addr4.sin_port = ntohs(42421);
        bind(new_fd, (struct sockaddr *)&bind_addr4, sizeof(bind_addr4));

        listen(new_fd, 5);

        client_fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
        connect(client_fd, (struct sockaddr *)&client_addr2, sizeof(client_addr2));

        newest_fd = accept(new_fd, NULL, NULL);
        close(new_fd);

        close(client_fd);
        close(new_fd);
}

As far as I can see, this bug has been there since the beginning of the
git-days.

Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: lock mutex when freeing IRQs

mv88e6xxx_g2_irq_free locks the registers mutex, but not
mv88e6xxx_g1_irq_free, which results in a stack trace from
assert_reg_lock when unloading the mv88e6xxx module. Fix this.

Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

packet: only test po->has_vnet_hdr once in packet_snd

Packet socket option po->has_vnet_hdr can be updated concurrently with
other operations if no ring is attached.

Do not test the option twice in packet_snd, as the value may change in
between calls. A race on setsockopt disable may cause a packet > mtu
to be sent without having GSO options set.

Fixes: bfd5f4a3d605 ("packet: Add GSO/csum offload support.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

packet: in packet_do_bind, test fanout with bind_lock held

Once a socket has po->fanout set, it remains a member of the group
until it is destroyed. The prot_hook must be constant and identical
across sockets in the group.

If fanout_add races with packet_do_bind between the test of po->fanout
and taking the lock, the bind call may make type or dev inconsistent
with that of the fanout group.

Hold po->bind_lock when testing po->fanout to avoid this race.

I had to introduce artificial delay (local_bh_enable) to actually
observe the race.

Fixes: dc99f600698d ("packet: Add fanout support.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: dwmac4: Re-enable MAC Rx before powering down

Re-enable the MAC receiver by setting CONFIG_RE before powering down,
as instructed in section 6.3.5.1 of [1]. Without this the MAC fails
to receive WoL packets and never wakes up.

[1] DWC Ethernet QoS Databook 4.10a October 2014

Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: dwc-qos: Add suspend / resume support

Add hook to stmmac_pltfr_pm_ops for suspend / resume handling.

Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: Fix network device registration order

We cannot be registering the network device first, then setting its
carrier off and finally connecting it to a PHY, doing that leaves a
window during which the carrier is at best inconsistent, and at worse
the device is not usable without a down/up sequence since the network
device is visible to user space with possibly no PHY device attached.

Re-order steps so that they make logical sense. This fixes some devices
where the port was not usable after e.g: an unbind then bind of the
driver.

Fixes: 0071f56e46da ("dsa: Register netdev before phy")
Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mv88e6xxx: Allow dsa and cpu ports in multiple vlans

Ports with the same VLAN must all be in the same bridge. However the
CPU and DSA ports need to be in multiple VLANs spread over multiple
bridges. So exclude them when performing this test.

Fixes: b2f81d304cee ("net: dsa: add CPU and DSA ports as VLAN members")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inetpeer: fix RCU lookup() again

My prior fix was not complete, as we were dereferencing a pointer
three times per node, not twice as I initially thought.

Fixes: 4cc5b44b29a9 ("inetpeer: fix RCU lookup()")
Fixes: b145425f269a ("inetpeer: remove AVL implementation in favor of RB tree")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mvpp2-various-fixes'

Antoine Tenart says:

====================
net: mvpp2: various fixes

This series contains 3 fixes for the Marvell PPv2 driver.

Since v1:
- Removed one patch about dma masks as it would need a better fix.
- Added one fix about the MAC Tx clock source selection.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: do not select the internal source clock

This patch stops the internal MAC Tx clock from being enabled as the
internal clock isn't used. The definition used for the bit controlling
this behaviour is renamed as well as it was wrongly named (bit 4 of
GMAC_CTRL_2_REG).

Fixes: 3919357fb0bb ("net: mvpp2: initialize the GMAC when using a port")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: fix port list indexing

The private port_list array has a list of pointers to mvpp2_port
instances. This list is allocated given the number of ports enabled in
the device tree, but the pointers are set using the port-id property. If
on a single port is enabled, the port_list array will be of size 1, but
when registering the port, if its id is not 0 the driver will crash.
Other crashes were encountered in various situations.

This fixes the issue by using an index not equal to the value of the
port-id property.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Yan Markman <ymarkman@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: fix parsing fragmentation detection

Parsing fragmentation detection failed due to wrong configured
parser TCAM entry's. Some traffic was marked as fragmented in RX
descriptor, even it wasn't IP fragmented. The hardware also failed to
calculate checksums which lead to use software checksum and caused
performance degradation.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tun: bail out from tun_get_user() if the skb is empty

KMSAN (https://github.com/google/kmsan) reported accessing uninitialized
skb->data[0] in the case the skb is empty (i.e. skb->len is 0):

================================================
BUG: KMSAN: use of uninitialized memory in tun_get_user+0x19ba/0x3770
CPU: 0 PID: 3051 Comm: probe Not tainted 4.13.0+ #3140
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
...
__msan_warning_32+0x66/0xb0 mm/kmsan/kmsan_instr.c:477
tun_get_user+0x19ba/0x3770 drivers/net/tun.c:1301
tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365
call_write_iter ./include/linux/fs.h:1743
new_sync_write fs/read_write.c:457
__vfs_write+0x6c3/0x7f0 fs/read_write.c:470
vfs_write+0x3e4/0x770 fs/read_write.c:518
SYSC_write+0x12f/0x2b0 fs/read_write.c:565
SyS_write+0x55/0x80 fs/read_write.c:557
do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284
entry_SYSCALL64_slow_path+0x25/0x25 arch/x86/entry/entry_64.S:245
...
origin:
...
kmsan_poison_shadow+0x6e/0xc0 mm/kmsan/kmsan.c:211
slab_alloc_node mm/slub.c:2732
__kmalloc_node_track_caller+0x351/0x370 mm/slub.c:4351
__kmalloc_reserve net/core/skbuff.c:138
__alloc_skb+0x26a/0x810 net/core/skbuff.c:231
alloc_skb ./include/linux/skbuff.h:903
alloc_skb_with_frags+0x1d7/0xc80 net/core/skbuff.c:4756
sock_alloc_send_pskb+0xabf/0xfe0 net/core/sock.c:2037
tun_alloc_skb drivers/net/tun.c:1144
tun_get_user+0x9a8/0x3770 drivers/net/tun.c:1274
tun_chr_write_iter+0x19f/0x300 drivers/net/tun.c:1365
call_write_iter ./include/linux/fs.h:1743
new_sync_write fs/read_write.c:457
__vfs_write+0x6c3/0x7f0 fs/read_write.c:470
vfs_write+0x3e4/0x770 fs/read_write.c:518
SYSC_write+0x12f/0x2b0 fs/read_write.c:565
SyS_write+0x55/0x80 fs/read_write.c:557
do_syscall_64+0x242/0x330 arch/x86/entry/common.c:284
return_from_SYSCALL_64+0x0/0x6a arch/x86/entry/entry_64.S:245
================================================

Make sure tun_get_user() doesn't touch skb->data[0] unless there is
actual data.

C reproducer below:
==========================
    // autogenerated by syzkaller (http://github.com/google/syzkaller)

    #define _GNU_SOURCE

    #include <fcntl.h>
    #include <linux/if_tun.h>
    #include <netinet/ip.h>
    #include <net/if.h>
    #include <string.h>
    #include <sys/ioctl.h>

    int main()
    {
      int sock = socket(PF_INET, SOCK_STREAM, IPPROTO_IP);
      int tun_fd = open("/dev/net/tun", O_RDWR);
      struct ifreq req;
      memset(&req, 0, sizeof(struct ifreq));
      strcpy((char*)&req.ifr_name, "gre0");
      req.ifr_flags = IFF_UP | IFF_MULTICAST;
      ioctl(tun_fd, TUNSETIFF, &req);
      ioctl(sock, SIOCSIFFLAGS, "gre0");
      write(tun_fd, "hi", 0);
      return 0;
    }
==========================

Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5: Fix wrong indentation in enable SRIOV code

Smatch is screaming:

drivers/net/ethernet/mellanox/mlx5/core/sriov.c:112
mlx5_device_enable_sriov() warn: inconsistent indenting

fix that.

Fixes: 7ecf6d8ff154 ('IB/mlx5: Restore IB guid/policy for virtual functions')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix static checker warning on steering tracepoints code

Fix this sparse complaint:

drivers/net/ethernet/mellanox/mlx5/core/./diag/fs_tracepoint.h:172:1:
warning: odd constant _Bool cast (ffffffffffffffff becomes 1)

Fixes: d9fea79171ee ('net/mlx5: Add tracepoints')
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix calculated checksum offloads counters

Instead of calculating the offloads counters, count them explicitly.
The calculations done for these counters would result in bugs in some
cases, for example:
When running TCP traffic over a VXLAN tunnel with TSO enabled the following
counters would increase:
       tx_csum_partial: 1,333,284
       tx_csum_partial_inner: 29,286
       tx4_csum_partial_inner: 384
       tx7_csum_partial_inner: 8
       tx9_csum_partial_inner: 34
       tx10_csum_partial_inner: 26,807
       tx11_csum_partial_inner: 287
       tx12_csum_partial_inner: 27
       tx16_csum_partial_inner: 6
       tx25_csum_partial_inner: 1,733

Seems like tx_csum_partial increased out of nowhere.
The issue is in the following calculation in mlx5e_update_sw_counters:
s->tx_csum_partial = s->tx_packets - tx_offload_none - s->tx_csum_partial_inner;

While tx_packets increases by the number of GSO segments for each SKB,
tx_csum_partial_inner will only increase by one, resulting in wrong
tx_csum_partial counter.

Fixes: bfe6d8d1d433 ("net/mlx5e: Reorganize ethtool statistics")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Don't add/remove 802.1ad rules when changing 802.1Q VLAN filter

Toggling of C-tag VLAN filter should not affect the "any S-tag" steering rule.

Fixes: 8a271746a264 ("net/mlx5e: Receive s-tagged packets in promiscuous mode")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Print netdev features correctly in error message

Use the correct formatting for netdev features.

Fixes: 0e405443e803 ("net/mlx5e: Improve set features ndo resiliency")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Check encap entry state when offloading tunneled flows

Encap entries cached by the driver could be invalidated due to
tunnel destination neighbour state changes.
When attempting to offload a flow that uses a cached encap entry,
we must check the entry validity and defer the offloading
if the entry exists but not valid.

When EAGAIN is returned, the flow offloading to hardware takes place
by the neigh update code when the tunnel destination neighbour
becomes connected.

Fixes: 232c001398ae ("net/mlx5e: Add support to neighbour update flow")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Disallow TC offloading of unsupported match/action combinations

When offloading header re-write, the HW may need to adjust checksums along
the packet. For IP traffic, and a case where we are asked to modify fields in
the IP header, current HW supports that only for TCP and UDP. Enforce it, in
this case fail the offloading attempt for non TCP/UDP packets.

Fixes: d7e75a325cb2 ('net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions')
Fixes: 2f4fe4cab073 ('net/mlx5e: Add offloading of NIC TC pedit (header re-write) actions')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix erroneous freeing of encap header buffer

In case the neighbour for the tunnel destination isn't valid,
we send a neighbour update request but we free the encap
header buffer. This is wrong, because we still need it for
allocating a HW encap entry once the neighbour is available.

Fix that by skipping freeing it if we wait for neighbour.

Fixes: 232c001398ae ('net/mlx5e: Add support to neighbour update flow')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Check device capability for maximum flow counters

Added check for the maximal number of flow counters attached
to rule (FTE).

Fixes: bd5251dbf156b ('net/mlx5_core: Introduce flow steering destination of type counter')
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix FPGA capability location

Currently, FPGA capability is located in (mdev)->caps.hca_cur,
change the location to be (mdev)->caps.fpga,
since hca_cur is reserved for HCA device capabilities.

Fixes: e29341fb3a5b ("net/mlx5: FPGA, Add basic support for Innova")
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: IPoIB, Fix access to invalid memory address

When cleaning rdma netdevice we need to save the mdev pointer
because priv is released when we release netdev.

This bug was found using the kernel address sanitizer (KASAN).
use-after-free in mlx5_rdma_netdev_free+0xe3/0x100 [mlx5_core]

Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

sctp: Fix a big endian bug in sctp_diag_dump()

The sctp_for_each_transport() function takes an pointer to int. The
cb->args[] array holds longs so it's only using the high 32 bits. It
works on little endian system but will break on big endian 64 bit
machines.

Fixes: d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-09-25' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.14

Quite a lot of fixes this time. Most notable is the brcmfmac fix for a
CVE issue.

iwlwifi

* a couple of bugzilla bugs related to multicast handling

* two fixes for WoWLAN bugs that were causing queue hangs and
  re-initialization problems

* two fixes for potential uninitialized variable use reported by Dan
  Carpenter in relation to a recently introduced patch

* a fix for buffer reordering in the newly supported 9000 device
  family

* fix a race when starting aggregation

* small fix for a recent patch to wake mac80211 queues

* send non-bufferable management frames in the generic queue so they
  are not sent on queues that are under power-save

ath10k

* fix a PCI PM related gcc warning

brcmfmac

* CVE-2017-0786: add length check scan results from firmware

* respect passive scan requests from user space

qtnfmac

* fix race in tx path when using multiple interfaces

* cancel ongoing scan when removing the wireless interface
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'aquantia-fixes'

Igor Russkikh says:

====================
aquantia: Atlantic driver bugfixes und improvements

This series contains bugfixes for aQuantia Atlantic driver.

Changes in v2:
Review comments applied:
- min_mtu set removed
- extra mtu range check is removed
- err codes handling improved
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

atlantic: fix iommu errors

Call skb_frag_dma_map multiple times if tx length is greater than
device max and avoid processing tx ring until entire packet has been
sent.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

aquantia: Fix transient invalid link down/up indications

Due to a bug in aquantia atlantic card firmware, it sometimes reports
invalid link speed bits. That caused driver to report link down events,
although link itself is totally fine.

This patch ignores such out of blue readings.

Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

aquantia: Fix Tx queue hangups

Driver did a poor job in managing its Tx queues: Sometimes it could stop
tx queues due to link down condition in aq_nic_xmit - but never waked up
them. That led to Tx path total suspend.
This patch fixes this and improves generic queue management:
- introduces queue restart counter
- uses generic netif_ interface to disable and enable tx path
- refactors link up/down condition and introduces dmesg log event when
link changes.
- introduces new constant for minimum descriptors count required for queue
wakeup

Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

aquantia: Setup max_mtu in ndev to enable jumbo frames

Although hardware is capable for almost 16K MTU, without max_mtu field
correctly set it only allows standard MTU to be used.
This patch enables max MTU, calculating it from hardware maximum frame size
of 16352 octets (including FCS).

Fixes: 5513e16421cb ("net: ethernet: aquantia: Fixes for aq_ndev_change_mtu")

Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: fix race condition in l2tp_tunnel_delete

If we try to delete the same tunnel twice, the first delete operation
does a lookup (l2tp_tunnel_get), finds the tunnel, calls
l2tp_tunnel_delete, which queues it for deletion by
l2tp_tunnel_del_work.

The second delete operation also finds the tunnel and calls
l2tp_tunnel_delete. If the workqueue has already fired and started
running l2tp_tunnel_del_work, then l2tp_tunnel_delete will queue the
same tunnel a second time, and try to free the socket again.

Add a dead flag to prevent firing the workqueue twice. Then we can
remove the check of queue_work's result that was meant to prevent that
race but doesn't.

Reproducer:

    ip l2tp add tunnel tunnel_id 3000 peer_tunnel_id 4000 local 192.168.0.2 remote 192.168.0.1 encap udp udp_sport 5000 udp_dport 6000
    ip l2tp add session name l2tp1 tunnel_id 3000 session_id 1000 peer_session_id 2000
    ip link set l2tp1 up
    ip l2tp del tunnel tunnel_id 3000
    ip l2tp del tunnel tunnel_id 3000

Fixes: f8ccac0e4493 ("l2tp: put tunnel socket release on a workqueue")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmit

When running LTP IPsec tests, KASan might report:

BUG: KASAN: use-after-free in vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
Read of size 4 at addr ffff880dc6ad1980 by task swapper/0/0
...
Call Trace:
  <IRQ>
  dump_stack+0x63/0x89
  print_address_description+0x7c/0x290
  kasan_report+0x28d/0x370
  ? vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
  __asan_report_load4_noabort+0x19/0x20
  vti_tunnel_xmit+0xeee/0xff0 [ip_vti]
  ? vti_init_net+0x190/0x190 [ip_vti]
  ? save_stack_trace+0x1b/0x20
  ? save_stack+0x46/0xd0
  dev_hard_start_xmit+0x147/0x510
  ? icmp_echo.part.24+0x1f0/0x210
  __dev_queue_xmit+0x1394/0x1c60
...
Freed by task 0:
  save_stack_trace+0x1b/0x20
  save_stack+0x46/0xd0
  kasan_slab_free+0x70/0xc0
  kmem_cache_free+0x81/0x1e0
  kfree_skbmem+0xb1/0xe0
  kfree_skb+0x75/0x170
  kfree_skb_list+0x3e/0x60
  __dev_queue_xmit+0x1298/0x1c60
  dev_queue_xmit+0x10/0x20
  neigh_resolve_output+0x3a8/0x740
  ip_finish_output2+0x5c0/0xe70
  ip_finish_output+0x4ba/0x680
  ip_output+0x1c1/0x3a0
  xfrm_output_resume+0xc65/0x13d0
  xfrm_output+0x1e4/0x380
  xfrm4_output_finish+0x5c/0x70

Can be fixed if we get skb->len before dst_output().

Fixes: b9959fd3b0fa ("vti: switch to new ip tunnel code")
Fixes: 22e1b23dafa8 ("vti6: Support inter address family tunneling.")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: fix nla_put_{u8,u16,u32} for KASAN

When CONFIG_KASAN is enabled, the "--param asan-stack=1" causes rather large
stack frames in some functions. This goes unnoticed normally because
CONFIG_FRAME_WARN is disabled with CONFIG_KASAN by default as of commit
3f181b4d8652 ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with
KASAN=y").

The kernelci.org build bot however has the warning enabled and that led
me to investigate it a little further, as every build produces these warnings:

net/wireless/nl80211.c:4389:1: warning: the frame size of 2240 bytes is larger than 2048 bytes [-Wframe-larger-than=]
net/wireless/nl80211.c:1895:1: warning: the frame size of 3776 bytes is larger than 2048 bytes [-Wframe-larger-than=]
net/wireless/nl80211.c:1410:1: warning: the frame size of 2208 bytes is larger than 2048 bytes [-Wframe-larger-than=]
net/bridge/br_netlink.c:1282:1: warning: the frame size of 2544 bytes is larger than 2048 bytes [-Wframe-larger-than=]

Most of this problem is now solved in gcc-8, which can consolidate
the stack slots for the inline function arguments. On older compilers
we can add a workaround by declaring a local variable in each function
to pass the inline function argument.

Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

rocker: fix rocker_tlv_put_* functions for KASAN

Inlining these functions creates lots of stack variables that each take
64 bytes when KASAN is enabled, leading to this warning about potential
stack overflow:

drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_cmd_flow_tbl_add':
drivers/net/ethernet/rocker/rocker_ofdpa.c:621:1: error: the frame size of 2752 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]

gcc-8 can now consolidate the stack slots itself, but on older versions
we get the same behavior by using a temporary variable that holds a
copy of the inline function argument.

Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: qcom/emac: specify the correct size when mapping a DMA buffer

When mapping the RX DMA buffers, the driver was accidentally specifying
zero for the buffer length. Under normal circumstances, SWIOTLB does not
need to allocate a bounce buffer, so the address is just mapped without
checking the size field. This is why the error was not detected earlier.

Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'l2tp-fix-some-races-in-session-deletion'

Guillaume Nault says:

====================
l2tp: fix some races in session deletion

L2TP provides several interfaces for deleting sessions. Using two of
them concurrently can lead to use-after-free bugs.

Patch #2 uses a flag to prevent double removal of L2TP sessions.
Patch #1 fixes a bug found in the way. Fixing this bug is also
necessary for patch #2 to handle all cases.

This issue is similar to the tunnel deletion bug being worked on by
Sabrina: https://patchwork.ozlabs.org/patch/814173/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: fix race between l2tp_session_delete() and l2tp_tunnel_closeall()

There are several ways to remove L2TP sessions:

  * deleting a session explicitly using the netlink interface (with
    L2TP_CMD_SESSION_DELETE),
  * deleting the session's parent tunnel (either by closing the
    tunnel's file descriptor or using the netlink interface),
  * closing the PPPOL2TP file descriptor of a PPP pseudo-wire.

In some cases, when these methods are used concurrently on the same
session, the session can be removed twice, leading to use-after-free
bugs.

This patch adds a 'dead' flag, used by l2tp_session_delete() and
l2tp_tunnel_closeall() to prevent them from stepping on each other's
toes.

The session deletion path used when closing a PPPOL2TP file descriptor
doesn't need to be adapted. It already has to ensure that a session
remains valid for the lifetime of its PPPOL2TP file descriptor.
So it takes an extra reference on the session in the ->session_close()
callback (pppol2tp_session_close()), which is eventually dropped
in the ->sk_destruct() callback of the PPPOL2TP socket
(pppol2tp_session_destruct()).
Still, __l2tp_session_unhash() and l2tp_session_queue_purge() can be
called twice and even concurrently for a given session, but thanks to
proper locking and re-initialisation of list fields, this is not an
issue.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp: ensure sessions are freed after their PPPOL2TP socket

If l2tp_tunnel_delete() or l2tp_tunnel_closeall() deletes a session
right after pppol2tp_release() orphaned its socket, then the 'sock'
variable of the pppol2tp_session_close() callback is NULL. Yet the
session is still used by pppol2tp_release().

Therefore we need to take an extra reference in any case, to prevent
l2tp_tunnel_delete() or l2tp_tunnel_closeall() from freeing the session.

Since the pppol2tp_session_close() callback is only set if the session
is associated to a PPPOL2TP socket and that both l2tp_tunnel_delete()
and l2tp_tunnel_closeall() hold the PPPOL2TP socket before calling
pppol2tp_session_close(), we're sure that pppol2tp_session_close() and
pppol2tp_session_destruct() are paired and called in the right order.
So the reference taken by the former will be released by the later.

Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge ath-current from ath.git

ath.git fixes for 4.14. Major changes:

ath10k

* fix a PCI PM related gcc warning

net: qualcomm: rmnet: Fix rcu splat in rmnet_is_real_dev_registered

Xiaolong reported a suspicious rcu_dereference_check in the device
unregister notifier callback. Since we do not dereference the
rx_handler_data, it's ok to just check for the value of the pointer.
Note that this section is already protected by rtnl_lock.

[  101.364846] WARNING: suspicious RCU usage
[  101.365654] 4.13.0-rc6-01701-gceed73a #1 Not tainted
[  101.370873] -----------------------------
[  101.372472] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:57 suspicious rcu_dereference_check() usage!
[  101.374427]
[  101.374427] other info that might help us debug this:
[  101.374427]
[  101.387491]
[  101.387491] rcu_scheduler_active = 2, debug_locks = 1
[  101.389368] 1 lock held by trinity-main/2809:
[  101.390736]  #0:  (rtnl_mutex){+.+.+.}, at: [<8146085b>] rtnl_lock+0xf/0x11
[  101.395482]
[  101.395482] stack backtrace:
[  101.396948] CPU: 0 PID: 2809 Comm: trinity-main Not tainted 4.13.0-rc6-01701-gceed73a #1
[  101.398857] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[  101.401079] Call Trace:
[  101.401656]  dump_stack+0xa1/0xeb
[  101.402871]  lockdep_rcu_suspicious+0xc7/0xd0
[  101.403665]  rmnet_is_real_dev_registered+0x40/0x4e
[  101.405199]  rmnet_config_notify_cb+0x2c/0x142
[  101.406344]  ? wireless_nlevent_flush+0x47/0x71
[  101.407385]  notifier_call_chain+0x2d/0x47
[  101.408645]  raw_notifier_call_chain+0xc/0xe
[  101.409882]  call_netdevice_notifiers_info+0x41/0x49
[  101.411402]  call_netdevice_notifiers+0xc/0xe
[  101.412713]  rollback_registered_many+0x268/0x36e
[  101.413702]  rollback_registered+0x39/0x56
[  101.414965]  unregister_netdevice_queue+0x79/0x88
[  101.415908]  unregister_netdev+0x16/0x1d

Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cnic: Fix an error handling path in 'cnic_alloc_bnx2x_resc()'

All the error handling paths 'goto error', except this one.
We should also go to error in this case, or some resources will be
leaking.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'parisc-4.14-2' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:

- Unbreak parisc bootloader by avoiding a gcc-7 optimization to convert
   multiple byte-accesses into one word-access.

- Add missing HWPOISON page fault handler code. I completely missed
   that when I added HWPOISON support during this merge window and it
   only showed up now with the madvise07 LTP test case.

- Fix backtrace unwinding to stop when stack start has been reached.

- Issue warning if initrd has been loaded into memory regions with
   broken RAM modules.

- Fix HPMC handler (parisc hardware fault handler) to comply with
   architecture specification.

- Avoid compiler warnings about too large frame sizes.

- Minor init-section fixes.

* 'parisc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Unbreak bootloader due to gcc-7 optimizations
  parisc: Reintroduce option to gzip-compress the kernel
  parisc: Add HWPOISON page fault handler code
  parisc: Move init_per_cpu() into init section
  parisc: Check if initrd was loaded into broken RAM
  parisc: Add PDCE_CHECK instruction to HPMC handler
  parisc: Add wrapper for pdc_instr() firmware function
  parisc: Move start_parisc() into init section
  parisc: Stop unwinding at start of stack
  parisc: Fix too large frame size warnings

Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma fixes from Doug Ledford:

- Smattering of miscellanous fixes

- A five patch series for i40iw that had a patch (5/5) that was larger
   than I would like, but I took it because it's needed for large scale
   users

- An 8 patch series for bnxt_re that landed right as I was leaving on
   PTO and so had to wait until now...they are all appropriate fixes for
   -rc IMO

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (22 commits)
  bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed
  bnxt_re: Fix memory leak in FRMR path
  bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port
  bnxt_re: Fix race between the netdev register and unregister events
  bnxt_re: Free up devices in module_exit path
  bnxt_re: Fix compare and swap atomic operands
  bnxt_re: Stop issuing further cmds to FW once a cmd times out
  bnxt_re: Fix update of qplib_qp.mtu when modified
  i40iw: Add support for port reuse on active side connections
  i40iw: Add missing VLAN priority
  i40iw: Call i40iw_cm_disconn on modify QP to disconnect
  i40iw: Prevent multiple netdev event notifier registrations
  i40iw: Fail open if there are no available MSI-X vectors
  RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion
  IB/bnxt_re: Fix frame stack compilation warning
  IB/mlx5: fix debugfs cleanup
  IB/ocrdma: fix incorrect fall-through on switch statement
  IB/ipoib: Suppress the retry related completion errors
  iw_cxgb4: remove the stid on listen create failure
  iw_cxgb4: drop listen destroy replies if no ep found
  ...

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix NAPI poll list corruption in enic driver, from Christian
    Lamparter.

2) Fix route use after free, from Eric Dumazet.

3) Fix regression in reuseaddr handling, from Josef Bacik.

4) Assert the size of control messages in compat handling since we copy
    it in from userspace twice. From Meng Xu.

5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.)
    from Ursula Braun.

6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn.

7) Don't use ARRAY_SIZE on spinlock array which might have zero
    entries, from Geert Uytterhoeven.

8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov
    Kasiviswanathan.

9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin
    Long.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
  inet: fix improper empty comparison
  net: use inet6_rcv_saddr to compare sockets
  net: set tb->fast_sk_family
  net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
  MAINTAINERS: update git tree locations for ieee802154 subsystem
  net: prevent dst uses after free
  net: phy: Fix truncation of large IRQ numbers in phy_attached_print()
  net/smc: no close wait in case of process shut down
  net/smc: introduce a delay
  net/smc: terminate link group if out-of-sync is received
  net/smc: longer delay for client link group removal
  net/smc: adapt send request completion notification
  net/smc: adjust net_device refcount
  net/smc: take RCU read lock for routing cache lookup
  net/smc: add receive timeout check
  net/smc: add missing dev_put
  net: stmmac: Cocci spatch "of_table"
  lan78xx: Use default values loaded from EEPROM/OTP after reset
  lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE
  lan78xx: Fix for eeprom read/write when device auto suspend
  ...

Merge tag 'apparmor-pr-2017-09-22' of git://git./linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
"This is the apparmor pull request, similar to SELinux and seccomp.

  It's the same series that I was sent to James' security tree + one
  regression fix that was found after the series was sent to James and
  would have been sent for v4.14-rc2.

  Features:
  - in preparation for secid mapping add support for absolute root view
    based labels
  - add base infastructure for socket mediation
  - add mount mediation
  - add signal mediation

  minor cleanups and changes:
  - be defensive, ensure unconfined profiles have dfas initialized
  - add more debug asserts to apparmorfs
  - enable policy unpacking to audit different reasons for failure
  - cleanup conditional check for label in label_print
  - Redundant condition: prev_ns. in [label.c:1498]

  Bug Fixes:
  - fix regression in apparmorfs DAC access permissions
  - fix build failure on sparc caused by undeclared signals
  - fix sparse report of incorrect type assignment when freeing label proxies
  - fix race condition in null profile creation
  - Fix an error code in aafs_create()
  - Fix logical error in verify_header()
  - Fix shadowed local variable in unpack_trans_table()"

* tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: fix apparmorfs DAC access permissions
  apparmor: fix build failure on sparc caused by undeclared signals
  apparmor: fix incorrect type assignment when freeing proxies
  apparmor: ensure unconfined profiles have dfas initialized
  apparmor: fix race condition in null profile creation
  apparmor: move new_null_profile to after profile lookup fns()
  apparmor: add base infastructure for socket mediation
  apparmor: add more debug asserts to apparmorfs
  apparmor: make policy_unpack able to audit different info messages
  apparmor: add support for absolute root view based labels
  apparmor: cleanup conditional check for label in label_print
  apparmor: add mount mediation
  apparmor: add the ability to mediate signals
  apparmor: Redundant condition: prev_ns. in [label.c:1498]
  apparmor: Fix an error code in aafs_create()
  apparmor: Fix logical error in verify_header()
  apparmor: Fix shadowed local variable in unpack_trans_table()

Merge tag 'acpi-4.14-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"These fix the initialization of resources in the ACPI WDAT watchdog
  driver, a recent regression in the ACPI device properties handling, a
  recent change in behavior causing the ACPI_HANDLE() macro to only work
  for GPL code and create a MAINTAINERS entry for ACPI PMIC drivers in
  order to specify the official reviewers for that code.

  Specifics:

   - Fix the initialization of resources in the ACPI WDAT watchdog
     driver that uses unititialized memory which causes compiler
     warnings to be triggered (Arnd Bergmann).

   - Fix a recent regression in the ACPI device properties handling that
     causes some device properties data to be skipped during enumeration
     (Sakari Ailus).

   - Fix a recent change in behavior that caused the ACPI_HANDLE() macro
     to stop working for non-GPL code which is a problem for the NVidia
     binary graphics driver, for example (John Hubbard).

   - Add a MAINTAINERS entry for the ACPI PMIC drivers to specify the
     official reviewers for that code (Rafael Wysocki)"

* tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly
  ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again
  ACPI / watchdog: properly initialize resources
  ACPI / PMIC: Add code reviewers to MAINTAINERS

Merge branch 'net-fix-reuseaddr-regression'

Josef Bacik says:

====================
net: fix reuseaddr regression

I introduced a regression when reworking the fastreuse port stuff that allows
bind conflicts to occur once a reuseaddr successfully opens on an existing tb.
The root cause is I reversed an if statement which caused us to set the tb as if
there were no owners on the socket if there were, which obviously is not
correct.

Dave could you please queue these changes up for -stable, I've run them through
the net tests and added another test to check for this problem specifically.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

inet: fix improper empty comparison

When doing my reuseport rework I screwed up and changed a

if (hlist_empty(&tb->owners))

to

if (!hlist_empty(&tb->owners))

This is obviously bad as all of the reuseport/reuse logic was reversed,
which caused weird problems like allowing an ipv4 bind conflict if we
opened an ipv4 only socket on a port followed by an ipv6 only socket on
the same port.

Fixes: b9470c27607b ("inet: kill smallest_size and smallest_port")
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: use inet6_rcv_saddr to compare sockets

In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the
ipv6 compare with the fast socket information to make sure we're doing
the proper comparisons.

Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: set tb->fast_sk_family

We need to set the tb->fast_sk_family properly so we can use the proper
comparison function for all subsequent reuseport bind requests.

Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: orphan frags on stand-alone ptype in dev_queue_xmit_nit

Zerocopy skbs frags are copied when the skb is looped to a local sock.
Commit 1080e512d44d ("net: orphan frags on receive") introduced calls
to skb_orphan_frags to deliver_skb and __netif_receive_skb for this.

With msg_zerocopy, these skbs can also exist in the tx path and thus
loop from dev_queue_xmit_nit. This already calls deliver_skb in its
loop. But it does not orphan before a separate pt_prev->func().

Add the missing skb_orphan_frags_rx.

Changes
v1->v2: handle skb_orphan_frags_rx failure

Fixes: 1f8b977ab32d ("sock: enable MSG_ZEROCOPY")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'pm-4.14-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix a cpufreq regression introduced by recent changes related to
  the generic DT driver, an initialization time memory leak in cpuidle
  on ARM, a PM core bug that may cause system suspend/resume to fail on
  some systems, a request type validation issue in the PM QoS framework
  and two documentation-related issues.

  Specifics:

   - Fix a regression in cpufreq on systems using DT as the source of
     CPU configuration information where two different code paths
     attempt to create the cpufreq-dt device object (there can be only
     one) and fix up the "compatible" matching for some TI platforms on
     top of that (Viresh Kumar, Dave Gerlach).

   - Fix an initialization time memory leak in cpuidle on ARM which
     occurs if the cpuidle driver initialization fails (Stefan Wahren).

   - Fix a PM core function that checks whether or not there are any
     system suspend/resume callbacks for a device, but forgets to check
     legacy callbacks which then may be skipped incorrectly and the
     system may crash and/or the device may become unusable after a
     suspend-resume cycle (Rafael Wysocki).

   - Fix request type validation for latency tolerance PM QoS requests
     which may lead to unexpected behavior (Jan Schönherr).

   - Fix a broken link to PM documentation from a header file and a typo
     in a PM document (Geert Uytterhoeven, Rafael Wysocki)"

* tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: ti-cpufreq: Support additional am43xx platforms
  ARM: cpuidle: Avoid memleak if init fail
  cpufreq: dt-platdev: Add some missing platforms to the blacklist
  PM: core: Fix device_pm_check_callbacks()
  PM: docs: Drop an excess character from devices.rst
  PM / QoS: Use the correct variable to check the QoS request type
  driver core: Fix link to device power management documentation

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- fixes for two long standing issues (lock up and a crash) in force
   feedback handling in uinput driver

- tweak to firmware update timing in Elan I2C touchpad driver.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - extend Flash-Write delay
  Input: uinput - avoid crash when sending FF request to device going away
  Input: uinput - avoid FF flush when destroying device

Merge tag 'seccomp-v4.14-rc2' of git://git./linux/kernel/git/kees/linux

Pull seccomp updates from Kees Cook:
"Major additions:

   - sysctl and seccomp operation to discover available actions
     (tyhicks)

   - new per-filter configurable logging infrastructure and sysctl
     (tyhicks)

   - SECCOMP_RET_LOG to log allowed syscalls (tyhicks)

   - SECCOMP_RET_KILL_PROCESS as the new strictest possible action

   - self-tests for new behaviors"

[ This is the seccomp part of the security pull request during the merge
  window that was nixed due to unrelated problems   - Linus ]

* tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  samples: Unrename SECCOMP_RET_KILL
  selftests/seccomp: Test thread vs process killing
  seccomp: Implement SECCOMP_RET_KILL_PROCESS action
  seccomp: Introduce SECCOMP_RET_KILL_PROCESS
  seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD
  seccomp: Action to log before allowing
  seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
  seccomp: Selftest for detection of filter flag support
  seccomp: Sysctl to configure actions that are allowed to be logged
  seccomp: Operation for checking if an action is available
  seccomp: Sysctl to display available actions
  seccomp: Provide matching filter for introspection
  selftests/seccomp: Refactor RET_ERRNO tests
  selftests/seccomp: Add simple seccomp overhead benchmark
  selftests/seccomp: Add tests for basic ptrace actions

Merge tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Various SMB3 fixes for stable and security improvements from the
  recently completed SMB3/Samba test events

* tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6:
  SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags
  SMB3: handle new statx fields
  SMB: Validate negotiate (to protect against downgrade) even if signing off
  cifs: release auth_key.response for reconnect.
  cifs: release cifs root_cred after exit_cifs
  CIFS: make arrays static const, reduces object code size
  [SMB3] Update session and share information displayed for debugging SMB2/SMB3
  cifs: show 'soft' in the mount options for hard mounts
  SMB3: Warn user if trying to sign connection that authenticated as guest
  SMB3: Fix endian warning
  Fix SMB3.1.1 guest authentication to Samba

Merge tag 'ceph-for-4.14-rc2' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"Two small but important fixes: RADOS semantic change in upcoming v12.2.1
  release and a rare NULL dereference in create_session_open_msg()"

* tag 'ceph-for-4.14-rc2' of git://github.com/ceph/ceph-client:
  ceph: avoid panic in create_session_open_msg() if utsname() returns NULL
  libceph: don't allow bidirectional swap of pg-upmap-items

MAINTAINERS: update git tree locations for ieee802154 subsystem

Patches for ieee802154 will go through my new trees towards netdev from
now on. The 6LoWPAN subsystem will stay as is (shared between ieee802154
and bluetooth) and go through the bluetooth tree as usual.

Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags

Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Merge tag 'pci-v4.14-fixes-2' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

- fix endpoint "end of test" interrupt issue (introduced in v4.14-rc1)
   (John Keeping)

- fix MIPS use-after-free map_irq() issue (introduced in v4.14-rc1)
   (Lorenzo Pieralisi)

* tag 'pci-v4.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: endpoint: Use correct "end of test" interrupt
  MIPS: PCI: Move map_irq() hooks out of initdata

Merge tag 'iommu-fixes-v4.14-rc1' of git://git./linux/kernel/git/joro/iommu

Pull IOMMU fixes from Joerg Roedel:

- two Kconfig fixes to fix dependencies that cause compile failures
   when they are not fulfilled.

- a section mismatch fix for Intel VT-d

- a fix for PCI topology detection in ARM device-tree code

* tag 'iommu-fixes-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/of: Remove PCI host bridge node check
  iommu/qcom: Depend on HAS_DMA to fix compile error
  iommu/vt-d: Fix harmless section mismatch warning
  iommu: Add missing dependencies

Merge git://git./linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile fixes from Chris Metcalf:
"These are a code cleanup and config cleanup, respectively"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: array underflow in setup_maxnodemem()
tile: defconfig: Cleanup from old Kconfig options

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- #ifdef CONFIG_EFI around __efi_fpsimd_begin/end

- Assembly code alignment reduced to 4 bytes from 16

- Ensure the kernel is compiled for LP64 (there are some arm64
   compilers around defaulting to ILP32)

- Fix arm_pmu_acpi memory leak on the error path

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf
  arm64: ensure the kernel is compiled for LP64
  arm64: relax assembly code alignment from 16 byte to 4 byte
  arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernels

SMB3: handle new statx fields

We weren't returning the creation time or the two easily supported
attributes (ENCRYPTED or COMPRESSED) for the getattr call to
allow statx to return these fields.

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>\
Acked-by: Jeff Layton <jlayton@poochiereds.net>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

arch: remove unused *_segments() macros/functions

Some architectures define the no-op macros/functions copy_segments,
release_segments and forget_segments. These are used nowhere in the
tree, so removed them.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Vineet Gupta <vgupta@synopsys.com> [for arch/arc]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branches 'acpi-pmic', 'acpi-bus', 'acpi-wdat' and 'acpi-properties'

* acpi-pmic:
  ACPI / PMIC: Add code reviewers to MAINTAINERS

* acpi-bus:
  ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again

* acpi-wdat:
  ACPI / watchdog: properly initialize resources

* acpi-properties:
  ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly

Merge branches 'pm-cpufreq' and 'pm-cpuidle'

* pm-cpufreq:
  cpufreq: ti-cpufreq: Support additional am43xx platforms
  cpufreq: dt-platdev: Add some missing platforms to the blacklist

* pm-cpuidle:
  ARM: cpuidle: Avoid memleak if init fail

Merge branches 'pm-core', 'pm-qos' and 'pm-docs'

* pm-core:
  PM: core: Fix device_pm_check_callbacks()

* pm-qos:
  PM / QoS: Use the correct variable to check the QoS request type

* pm-docs:
  PM: docs: Drop an excess character from devices.rst
  driver core: Fix link to device power management documentation

parisc: Unbreak bootloader due to gcc-7 optimizations

gcc-7 optimizes the byte-wise accesses of get_unaligned_le32() into
word-wise accesses if the 32-bit integer output_len is declared as
external. This panics then the bootloader since we don't have the
unaligned access fault trap handler installed during boot time.

Avoid this optimization by declaring output_len as byte-aligned and thus
unbreak the bootloader code.

Additionally, compile the boot code optimized for size.

Signed-off-by: Helge Deller <deller@gmx.de>

parisc: Reintroduce option to gzip-compress the kernel

By adding the feature to build the kernel as self-extracting
executeable, the possibility to simply compress the kernel with gzip was
lost.

This patch now reintroduces this possibilty again and leaves it up to
the user to decide how the kernel should be built.

The palo bootloader is able to natively load both formats.

Signed-off-by: Helge Deller <deller@gmx.de>

apparmor: fix apparmorfs DAC access permissions

The DAC access permissions for several apparmorfs files are wrong.

.access - needs to be writable by all tasks to perform queries
the others in the set only provide a read fn so should be read only.

With policy namespace virtualization all apparmor needs to control
the permission and visibility checks directly which means DAC
access has to be allowed for all user, group, and other.

BugLink: http://bugs.launchpad.net/bugs/1713103
Fixes: c97204baf840b ("apparmor: rename apparmor file fns and data to indicate use")
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix build failure on sparc caused by undeclared signals

  In file included from security/apparmor/ipc.c:23:0:
  security/apparmor/include/sig_names.h:26:3: error: 'SIGSTKFLT' undeclared here (not in a function)
    [SIGSTKFLT] = 16, /* -, 16, - */
     ^
  security/apparmor/include/sig_names.h:26:3: error: array index in initializer not of integer type
  security/apparmor/include/sig_names.h:26:3: note: (near initialization for 'sig_map')
  security/apparmor/include/sig_names.h:51:3: error: 'SIGUNUSED' undeclared here (not in a function)
    [SIGUNUSED] = 34, /* -, 31, - */
     ^
  security/apparmor/include/sig_names.h:51:3: error: array index in initializer not of integer type
  security/apparmor/include/sig_names.h:51:3: note: (near initialization for 'sig_map')

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: c6bf1adaecaa ("apparmor: add the ability to mediate signals")
Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix incorrect type assignment when freeing proxies

sparse reports

poisoning the proxy->label before freeing the struct is resulting in
a sparse build warning.
../security/apparmor/label.c:52:30: warning: incorrect type in assignment (different address spaces)
../security/apparmor/label.c:52:30: expected struct aa_label [noderef] <asn:4>*label
../security/apparmor/label.c:52:30: got struct aa_label *<noident>

fix with RCU_INIT_POINTER as this is one of those cases where
rcu_assign_pointer() is not needed.

Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: ensure unconfined profiles have dfas initialized

Generally unconfined has early bailout tests and does not need the
dfas initialized, however if an early bailout test is ever missed
it will result in an oops.

Be defensive and initialize the unconfined profile to have null dfas
(no permission) so if an early bailout test is missed we fail
closed (no perms granted) instead of oopsing.

Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: fix race condition in null profile creation

There is a race when null- profile is being created between the
initial lookup/creation of the profile and lock/addition of the
profile. This could result in multiple version of a profile being
added to the list which need to be removed/replaced.

Since these are learning profile their is no affect on mediation.

Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: move new_null_profile to after profile lookup fns()

new_null_profile will need to use some of the profile lookup fns()
so move instead of doing forward fn declarations.

Signed-off-by: John Johansen <john.johansen@canonical.com>

apparmor: add more debug asserts to apparmorfs

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>

apparmor: make policy_unpack able to audit different info messages

Switch unpack auditing to using the generic name field in the audit
struct and make it so we can start adding new info messages about
why an unpack failed.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>

apparmor: add support for absolute root view based labels

With apparmor policy virtualization based on policy namespace View's
we don't generally want/need absolute root based views, however there
are cases like debugging and some secid based conversions where
using a root based view is important.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>