GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
19 years ago[CPUFREQ] make cpufreq_gov_dbs static
Dave Jones [Wed, 1 Jun 2005 02:03:46 +0000 (19:03 -0700)]
[CPUFREQ] make cpufreq_gov_dbs static

This patch makes a needlessly global and EXPORT_SYMBOL'ed struct static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Recalibrate cpu_khz [2/2]
Dave Jones [Wed, 1 Jun 2005 02:03:46 +0000 (19:03 -0700)]
[CPUFREQ] Recalibrate cpu_khz [2/2]

Some cpufreq drivers (at that time, only powernow-k7) need to recalibrate the
cpu_khz at runtime.

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Recalibrate cpu_khz [1/2]
Dave Jones [Wed, 1 Jun 2005 02:03:45 +0000 (19:03 -0700)]
[CPUFREQ] Recalibrate cpu_khz [1/2]

We have to recalibrate cpu_khz in order to use the current FID instead the max
FID since some BIOS do not put the processor at maximum frequency at POST.
Also, some BIOS will change the processor frequency at our back after cpu_khz
was calibrate.  Finally, this will fix a long standing bug when we do
something like this:

# rmmod powernow-k7
# modprobe powernow-k7

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] AMD Elan SC520 cpufreq driver.
Dave Jones [Wed, 1 Jun 2005 02:03:45 +0000 (19:03 -0700)]
[CPUFREQ] AMD Elan SC520 cpufreq driver.

From: Sean Young <sean@mess.org>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] Add warning comment about default governors.
Dave Jones [Wed, 1 Jun 2005 02:03:44 +0000 (19:03 -0700)]
[CPUFREQ] Add warning comment about default governors.

This comes up time and time again. Until its fixed, place this
comment in the Kconfig which should stem the flow of resubmissions.

Signed-off-by: Rob Weryk <rjweryk@uwo.ca>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] speedstep-smi: it works on at least one P4M
Dave Jones [Wed, 1 Jun 2005 02:03:44 +0000 (19:03 -0700)]
[CPUFREQ] speedstep-smi: it works on at least one P4M

The speedstep-smi driver actually works on >=1 notebook with a
Pentium 4-M CPU where all other cpufreq drivers fail. Therefore,
allow speedstep-smi on P4Ms again, but warn users of likely failure

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] ondemand: trivial clean-ups
Dave Jones [Wed, 1 Jun 2005 02:03:44 +0000 (19:03 -0700)]
[CPUFREQ] ondemand: trivial clean-ups

Trivial ondemand governor clean-ups:
- change from sampling_rate_in_HZ() to the official function
usecs_to_jiffies().
- use for_each_online_cpu() to instead of using "if (cpu_online(i))"

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] speedstep-centrino: Pentium 4 - M (HT) support
Dave Jones [Wed, 1 Jun 2005 02:03:43 +0000 (19:03 -0700)]
[CPUFREQ] speedstep-centrino: Pentium 4 - M (HT) support

The Pentium 4 - Ms (HT) with CPUID 0xF34 and 0xF41 seem to support
centrino-like enhanced speedstep; however, no "table" support is possible.
Therefore, put NULL entries into speedstep-centrino.c

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] cpufreq-core: reduce warning messages.
Dave Jones [Wed, 1 Jun 2005 02:03:43 +0000 (19:03 -0700)]
[CPUFREQ] cpufreq-core: reduce warning messages.

cpufreq core is printing out messages at KERN_WARNING level that the core
recovers from without intervention, and that the system administrator can
do nothing about.  Patch below reduces the severity of these messages to
debug.

Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[CPUFREQ] powernow-k7: don't print khz element of FSB.
Dave Jones [Wed, 1 Jun 2005 02:03:42 +0000 (19:03 -0700)]
[CPUFREQ] powernow-k7: don't print khz element of FSB.

Signed-off-by: Dave Jones <davej@redhat.com>
19 years ago[PATCH] UDF filesystem: array '__mon_yday' declared as not static
Goffredo Baroncelli [Tue, 31 May 2005 21:39:31 +0000 (14:39 -0700)]
[PATCH] UDF filesystem: array '__mon_yday' declared as not static

in fs/udf/udftime.c the global array '__mon_yday' is not static, and it
conflicts with the glibc one when the kernel is compiled as user mode.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] pcdp.c build fix
Peter Chubb [Tue, 31 May 2005 21:39:30 +0000 (14:39 -0700)]
[PATCH] pcdp.c build fix

In file included from drivers/firmware/pcdp.c:18:
drivers/firmware/pcdp.h:48: error: field `addr' has incomplete type
drivers/firmware/pcdp.c: In function `setup_serial_console':
drivers/firmware/pcdp.c:27: error:  `ACPI_ADR_SPACE_SYSTEM_MEMORY' undeclared (first use in this  function)

Cc: <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] flush icache in correct context
Roman Zippel [Tue, 31 May 2005 21:39:29 +0000 (14:39 -0700)]
[PATCH] flush icache in correct context

flush_icache_range() is used in two different situation - in binfmt_elf.c &
co for user space mappings and module.c for kernel modules.  On m68k
flush_icache_range() doesn't know which data to flush, as it has separate
address spaces and the pointer argument can be valid in either address
space.

First I considered splitting flush_icache_range(), but this patch is
simpler.  Setting the correct context gives flush_icache_range() enough
information to flush the correct data.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: allow timer based profiling on iseries
Anton Blanchard [Tue, 31 May 2005 21:39:29 +0000 (14:39 -0700)]
[PATCH] ppc64: allow timer based profiling on iseries

We used to have an iseries specific profiler that used /proc/profile.  Now
thats gone we can use the generic timer based stuff.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] h8300 sleep problem
Nick Piggin [Tue, 31 May 2005 21:39:28 +0000 (14:39 -0700)]
[PATCH] h8300 sleep problem

h8300 appears to sleep (halt) when need_resched IS set.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] acpi build fix: x86 setup.c
Alexander Nyberg [Tue, 31 May 2005 21:39:27 +0000 (14:39 -0700)]
[PATCH] acpi build fix: x86 setup.c

This is a neverending story

linux/acpi.h contains empty declarations for acpi_boot_init() &
acpi_boot_table_init() but they are nested inside #ifdef CONFIG_ACPI.

So we'll have to #ifdef in arch/i386/kernel/setup.c: setup_arch()

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86_64 CONFIG_ACPI=n build fix
Andi Kleen [Tue, 31 May 2005 21:39:26 +0000 (14:39 -0700)]
[PATCH] x86_64 CONFIG_ACPI=n build fix

Make CONFIG_X86_PM_TIMER dependent on CONFIG_ACPI

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86_64: More fixes for compilation without CONFIG_ACPI
Andi Kleen [Tue, 31 May 2005 21:39:26 +0000 (14:39 -0700)]
[PATCH] x86_64: More fixes for compilation without CONFIG_ACPI

Suggested by Alexander Nyberg

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoAutomatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Tue, 31 May 2005 18:07:54 +0000 (11:07 -0700)]
Merge ... /pub/scm/linux/kernel/git/aegl/linux-2.6

19 years ago[IA64] Use "PER_CPU" form of EXPORT macro
Tony Luck [Tue, 31 May 2005 17:38:32 +0000 (10:38 -0700)]
[IA64] Use "PER_CPU" form of EXPORT macro

I was gently reminded that there are per-cpu forms of the EXPORT_SYMBOL macros.

Signed-off-by: Tony Luck <tony.luck@intel.com>
19 years ago[PATCH] Relax idecd dma alignment check
Jens Axboe [Tue, 31 May 2005 15:47:36 +0000 (17:47 +0200)]
[PATCH] Relax idecd dma alignment check

Only the address needs alignment of mask bits, length should work with
a relaxed alignment check.

Signed-off-by: Jens Axboe <axboe@suse.de>
[ This is take 2: make the length check be for 16-byte alignment, not
  just word alignment.  That should hopefully keep everybody happy,
  while still allowing CD writing with DMA ]

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64: actually call prom_send_capabilities
Paul Mackerras [Tue, 31 May 2005 07:01:11 +0000 (17:01 +1000)]
[PATCH] ppc64: actually call prom_send_capabilities

When I sent in the patch adding the code for the kernel to tell the
firmware about its capabilities on pSeries machines, I included the
function to give the capabilities to firmware but somehow forgot the
hunk that adds the call to the new function.  This patch adds the
call.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoMerge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/tg3-2.6
Linus Torvalds [Mon, 30 May 2005 05:39:38 +0000 (22:39 -0700)]
Merge ... /pub/scm/linux/kernel/git/davem/tg3-2.6

19 years agoMerge of /home/davem/src/GIT/tg3-2.6/
David S. Miller [Mon, 30 May 2005 04:25:01 +0000 (21:25 -0700)]
Merge of /home/davem/src/GIT/tg3-2.6/

19 years ago[NET]: Use %lx for netdev->features sysfs formatting.
David S. Miller [Mon, 30 May 2005 03:28:25 +0000 (20:28 -0700)]
[NET]: Use %lx for netdev->features sysfs formatting.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV6]: Clear up user copy warning in flowlabel code.
David S. Miller [Mon, 30 May 2005 03:28:01 +0000 (20:28 -0700)]
[IPV6]: Clear up user copy warning in flowlabel code.

We are intentionally ignoring the copy_to_user() value,
make it clear to the compiler too.

Noted by Jeff Garzik.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Add ethtool support for NETIF_F_HW_CSUM.
Jon Mason [Mon, 30 May 2005 03:27:24 +0000 (20:27 -0700)]
[NET]: Add ethtool support for NETIF_F_HW_CSUM.

Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: Kill MULTIPATHHOLDROUTE flag.
Pravin B. Shelar [Mon, 30 May 2005 03:26:44 +0000 (20:26 -0700)]
[IPV4]: Kill MULTIPATHHOLDROUTE flag.

It cannot work properly, so just ignore it in drr
and rr multipath algorithms just like the random
multipath algorithm does.

Suggested by Herbert Xu.

Signed-off by: Pravin B. Shelar <pravins@calsoftinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[NET]: Add is_multicast_ether_addr() in include/linux/etherdevice.h
Michael Ellerman [Mon, 30 May 2005 03:24:30 +0000 (20:24 -0700)]
[NET]: Add is_multicast_ether_addr() in include/linux/etherdevice.h

This patch adds is_multicast_ether_addr() to go along with
is_valid_ether_addr() and friends. It then changes
is_valid_ether_addr() to use the new macro, and fixes up the comment
on that function to move implementation details out of the API doco.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[IPV4]: Primary and secondary addresses
Harald Welte [Mon, 30 May 2005 03:23:46 +0000 (20:23 -0700)]
[IPV4]: Primary and secondary addresses

Add an option to make secondary IP addresses get promoted
when primary IP addresses are removed from the device.
It defaults to off to preserve existing behavior.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agoAutomatic merge of 'misc-fixes' branch from
Linus Torvalds [Mon, 30 May 2005 02:30:03 +0000 (19:30 -0700)]
Automatic merge of 'misc-fixes' branch from

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

19 years ago[TG3]: Fix bug in tg3_load_firmware_cpu
Michael Chan [Sun, 29 May 2005 21:59:49 +0000 (14:59 -0700)]
[TG3]: Fix bug in tg3_load_firmware_cpu

Add tg3_nvram_lock() and tg3_nvram_unlock() calls around tg3_halt_cpu().
It is possible that the bootcode may be loading code from nvram during
this call and stopping the cpu without getting the lock may cause
uncompleted nvram data to be left in the nvram data register. Subsequent
calls to read/write nvram data will fail.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add interrupt test
Michael Chan [Sun, 29 May 2005 21:59:20 +0000 (14:59 -0700)]
[TG3]: Add interrupt test

This test uses the previously added tg3_test_interrupt() to perform the
test.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add loopback test
Michael Chan [Sun, 29 May 2005 21:58:59 +0000 (14:58 -0700)]
[TG3]: Add loopback test

The test will loopback one packet in MAC loopback mode and verify the
packet data.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add memory test
Michael Chan [Sun, 29 May 2005 21:58:36 +0000 (14:58 -0700)]
[TG3]: Add memory test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add register test
Michael Chan [Sun, 29 May 2005 21:58:11 +0000 (14:58 -0700)]
[TG3]: Add register test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add parameter to tg3_halt
Michael Chan [Sun, 29 May 2005 21:57:48 +0000 (14:57 -0700)]
[TG3]: Add parameter to tg3_halt

Add a reset kind parameter to tg3_halt() so that the RESET_KIND_SUSPEND
parameter can be passed to tg3_halt() before doing offline tests.

All other calls to tg3_halt() will use the RESET_KIND_SHUTDOWN
parameter.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add link test
Michael Chan [Sun, 29 May 2005 21:57:23 +0000 (14:57 -0700)]
[TG3]: Add link test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add nvram test
Michael Chan [Sun, 29 May 2005 21:56:58 +0000 (14:56 -0700)]
[TG3]: Add nvram test

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[TG3]: Add basic selftest infrastructure
Michael Chan [Sun, 29 May 2005 21:56:34 +0000 (14:56 -0700)]
[TG3]: Add basic selftest infrastructure

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: receive path optimization
Stephen Hemminger [Sun, 29 May 2005 21:16:48 +0000 (14:16 -0700)]
[BRIDGE]: receive path optimization

This improves the bridge local receive path by avoiding going
through another softirq.  The bridge receive path is already being called
from a netif_receive_skb() there is no point in going through another
receiveq round trip.

Recursion is limited because bridge can never be a port of a bridge
so handle_bridge() always returns.

Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: prevent bad forwarding table updates
Stephen Hemminger [Sun, 29 May 2005 21:15:55 +0000 (14:15 -0700)]
[BRIDGE]: prevent bad forwarding table updates

Avoid poisoning of the bridge forwarding table by frames that have been
dropped by filtering. This prevents spoofed source addresses on hostile
side of bridge from causing packet leakage, a small but possible security
risk.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: set features based on enslaved devices
Stephen Hemminger [Sun, 29 May 2005 21:15:17 +0000 (14:15 -0700)]
[BRIDGE]: set features based on enslaved devices

Make features of the bridge pseudo-device be a subset of the underlying
devices.  Motivated by Xen and others who use bridging to do failover.

Signed-off-by: Catalin BOIE <catab at umrella.ro>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: make dev->features unsigned
Stephen Hemminger [Sun, 29 May 2005 21:14:35 +0000 (14:14 -0700)]
[BRIDGE]: make dev->features unsigned

The features field in netdevice is really a bitmask, and bitmask's should
be unsigned.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years ago[BRIDGE]: features change notification
Stephen Hemminger [Sun, 29 May 2005 21:13:47 +0000 (14:13 -0700)]
[BRIDGE]: features change notification

Resend of earlier patch (no changes) from Catalin used to provide
device feature change notification.

Signed-off-by: Catalin BOIE <catab at umbrella.ro>
Acked-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
19 years agolibata: bump version
Jeff Garzik [Sun, 29 May 2005 18:48:20 +0000 (14:48 -0400)]
libata: bump version

19 years agoAutomatic merge of /spare/repo/netdev-2.6 branch use-after-unmap
<jgarzik@pretzel.yyz.us> [Sun, 29 May 2005 18:24:57 +0000 (14:24 -0400)]
Merge ... /spare/repo/netdev-2.6 branch use-after-unmap

19 years agoAutomatic merge of 'for-linus' branch from
Linus Torvalds [Sun, 29 May 2005 17:40:13 +0000 (10:40 -0700)]
Automatic merge of 'for-linus' branch from

rsync://rsync.kernel.org/pub/scm/linux/kernel/git/dtor/input

19 years agoInput: Fix fast scrolling scancodes in atkbd.c
Vojtech Pavlik [Sun, 29 May 2005 06:27:44 +0000 (01:27 -0500)]
Input: Fix fast scrolling scancodes in atkbd.c

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
19 years ago[PATCH] ppc32: i8259 PIC should not be initialized if PCI is not configured
Kumar Gala [Sat, 28 May 2005 22:52:15 +0000 (15:52 -0700)]
[PATCH] ppc32: i8259 PIC should not be initialized if PCI is not configured

Trying to initialize the i8259 PIC will not work if CONFIG_PCI is not
enabled.  The kernel hangs if the initialization is tried.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Add soft reset to MPC834x
Kumar Gala [Sat, 28 May 2005 22:52:15 +0000 (15:52 -0700)]
[PATCH] ppc32: Add soft reset to MPC834x

This change allows mpc83xx_restart to issue a software reset.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: MPC834x BCSR_SIZE too small for use in a BAT.
Kumar Gala [Sat, 28 May 2005 22:52:14 +0000 (15:52 -0700)]
[PATCH] ppc32: MPC834x BCSR_SIZE too small for use in a BAT.

The call to io_block_mapping was creating an invalid BAT entry because the
value of BCSR_SIZE (32K) is too small to be used in a BAT (128K min).  This
change removes the io_block_mapping call since these registers can easily
be mapped using ioremap at the point of use.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Simplified load string emulation error checking
Kumar Gala [Sat, 28 May 2005 22:52:13 +0000 (15:52 -0700)]
[PATCH] ppc32: Simplified load string emulation error checking

The error checking for emulation of load string instructions was overly
generous and would cause certain valid forms of the instructions to be
treated as illegal.  We drop the range checking since the architecture
allows this to be boundedly undefined.  Tests on CPUs that support these
instructions appear not do cause illegal instruction traps on range errors
and just allow the execution to occur.

Thanks to Kim Phillips for debugging this and figuring out what real HW was
doing.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix building MPC8555 CDS when CONFIG_PCI is disabled
Kumar Gala [Sat, 28 May 2005 22:52:12 +0000 (15:52 -0700)]
[PATCH] ppc32: Fix building MPC8555 CDS when CONFIG_PCI is disabled

The patch that introduced support for the VIA chipset broke building if
CONFIG_PCI is disabled.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Support for 82xx PQII on-chip PCI bridge
Vitaly Bordug [Sat, 28 May 2005 22:52:09 +0000 (15:52 -0700)]
[PATCH] ppc32: Support for 82xx PQII on-chip PCI bridge

This patch adds on-chip PCI bridge support for the PQ2 family.  The
incomplete existent code is updated with interrupt handling stuff and
board-specific bits for 8272ADS and PQ2FADS; the related files were renamed
(from m8260_pci to m82xx_pci) to be of more generic fashion.  This is
tested with 8266ADS and 8272ADS, should work on PQ2FADS as well.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Add VIA IDE support to MPC8555 CDS platform
Kumar Gala [Sat, 28 May 2005 22:52:07 +0000 (15:52 -0700)]
[PATCH] ppc32: Add VIA IDE support to MPC8555 CDS platform

Add support for the VIA IDE controller that exists on the MPC8555 CDS
system.  Updated the config for the system to enable support by default.

Signed-off-by: Scott Hall <shall@mvista.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix some minor issues related to FSL Book-E KGDB support
Kumar Gala [Sat, 28 May 2005 22:52:06 +0000 (15:52 -0700)]
[PATCH] ppc32: Fix some minor issues related to FSL Book-E KGDB support

Some debug registers needed to be initialized early on to allow proper
support for KGDB.  Additionally, we need to setup the
ppc.md_early_serial_map function pointer on boards that have serial support
for KGDB.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix uImage make target to report success correctly
Kumar Gala [Sat, 28 May 2005 22:52:05 +0000 (15:52 -0700)]
[PATCH] ppc32: Fix uImage make target to report success correctly

The existing make rule when building a uImage would check to see if the
image file existed to report 'is ready' or 'not made'.  However make
appeared to compute the file list before the rule was executed.

Signed-off-by: Chris Clark <cpclark@xmission.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: remove jail mode + other leftovers
Paolo 'Blaisorblade' Giarrusso [Sat, 28 May 2005 22:52:04 +0000 (15:52 -0700)]
[PATCH] uml: remove jail mode + other leftovers

This var is currently useless, as it's apparent from reading the code. Until
2.6.11 it was used in some code related to jail mode, in the same proc.:

        if(jail){
while(!reading) sched_yield();
}

jail mode has been dropped, together with that use, so let's finish dropping
this.

Also, remove some other useless definitions I met.

Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: fixlet for arch_prctl_skas
Paolo 'Blaisorblade' Giarrusso [Sat, 28 May 2005 22:52:03 +0000 (15:52 -0700)]
[PATCH] uml: fixlet for arch_prctl_skas

Fix it a bit (after some cross checking with "man arch_prctl"). There were:
*) typos FS/GS and back
*) FS in place of FS_BASE (and the same for GS)
*) the procedure used put_user on &addr, where addr was the parameter (i.e.
changed its param with put_user, completely useless) rather than interpreting
addr as a pointer, as requested in this case (see the man page).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] irq code: Add coherence test for PREEMPT_ACTIVE
Paolo 'Blaisorblade' Giarrusso [Sat, 28 May 2005 22:52:02 +0000 (15:52 -0700)]
[PATCH] irq code: Add coherence test for PREEMPT_ACTIVE

After porting this fixlet to UML:

http://linux.bkbits.net:8080/linux-2.5/cset@41791ab52lfMuF2i3V-eTIGRBbDYKQ

, I've also added a warning which should refuse compilation with insane values
for PREEMPT_ACTIVE...  maybe we should simply move PREEMPT_ACTIVE out of
architectures using GENERIC_IRQS.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] sh: PREEMPT_ACTIVE fix
Paul Mundt [Sat, 28 May 2005 22:52:01 +0000 (15:52 -0700)]
[PATCH] sh: PREEMPT_ACTIVE fix

Port Paulus's ppc64 fix to sh:

  When the generic IRQ stuff went in, it seems that HARDIRQ_BITS got bumped
  from 9 (for ppc64) up to 12.  Consequently, the PREEMPT_ACTIVE bit is now
  within HARDIRQ_MASK, and I get in_interrupt() falsely returning true when
  PREEMPT_ACTIVE is set, and thus a BUG_ON tripping in arch/ppc64/mm/tlb.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: fix PREEMPT_ACTIVE
Paolo 'Blaisorblade' Giarrusso [Sat, 28 May 2005 22:52:00 +0000 (15:52 -0700)]
[PATCH] uml: fix PREEMPT_ACTIVE

This is a continuation for UML of:

http://linux.bkbits.net:8080/linux-2.5/cset@41791ab52lfMuF2i3V-eTIGRBbDYKQ

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: stack dump fix
Paolo 'Blaisorblade' Giarrusso [Sat, 28 May 2005 22:52:00 +0000 (15:52 -0700)]
[PATCH] uml: stack dump fix

Copy (and adapt) to UML the stack code dumper used in i386 when
CONFIG_FRAME_POINTER is enabled.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: split CONFIG_FRAME_POINTER from DEBUG_INFO
Paolo 'Blaisorblade' Giarrusso [Sat, 28 May 2005 22:51:59 +0000 (15:51 -0700)]
[PATCH] uml: split CONFIG_FRAME_POINTER from DEBUG_INFO

Until now, FRAME_POINTER was set = DEBUG_INFO for UML.  Change it to be the
default way, so that it can be enabled alone (for instance to get better
backtraces on crashes).  The call-trace dumper which uses the frame pointer is
not yet in, I'm going to introduce it in a separate patch.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: add MOD_LICENSE to random driver
Paolo 'Blaisorblade' Giarrusso [Sat, 28 May 2005 22:51:58 +0000 (15:51 -0700)]
[PATCH] uml: add MOD_LICENSE to random driver

Add a MODULE_LICENSE("GPL") to the driver, remove some unused macros and add
the GPL license (it's GPL-licensed anyway since it's a GPL-derivative, apart
that Jeff Dike releases GPL software, in case anybody is wondering).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: add modversions support
Paolo 'Blaisorblade' Giarrusso [Sat, 28 May 2005 22:51:57 +0000 (15:51 -0700)]
[PATCH] uml: add modversions support

Actually, the real support was added by some earlier patches.  Now we simply
re-enable the config.  option.  I've actually tested it and it works well.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: remove unused code
Jeff Dike [Sat, 28 May 2005 22:51:57 +0000 (15:51 -0700)]
[PATCH] uml: remove unused code

This removes two now unused files and a couple of unused functions.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: fix segfault on exit with CONFIG_GCOV
Jeff Dike [Sat, 28 May 2005 22:51:56 +0000 (15:51 -0700)]
[PATCH] uml: fix segfault on exit with CONFIG_GCOV

We need to disable signals on exit in all cases, not just when rebooting.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: single-space a help message
Jeff Dike [Sat, 28 May 2005 22:51:55 +0000 (15:51 -0700)]
[PATCH] uml: single-space a help message

One of the ubd driver help strings was bust.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: remove 2_5compat.h
Jeff Dike [Sat, 28 May 2005 22:51:54 +0000 (15:51 -0700)]
[PATCH] uml: remove 2_5compat.h

Remove old useless header that was used in Ye Olde Times during 2.4->2.5
porting to abstract differences.  It's definitions are no more used anyway, so
let's finally kill it.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: turn off kmalloc always on a fatal signal
Jeff Dike [Sat, 28 May 2005 22:51:54 +0000 (15:51 -0700)]
[PATCH] uml: turn off kmalloc always on a fatal signal

We should turn off kmalloc when getting a fatal signal regardless of the mode
we're in.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] uml: fix a couple of warnings
Jeff Dike [Sat, 28 May 2005 22:51:53 +0000 (15:51 -0700)]
[PATCH] uml: fix a couple of warnings

Eliminate an unused variable warning in ptrace.c and a size mismatch warning
by adding a cast to __pa.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] dvb: Small cleanup
Manu Abraham [Sat, 28 May 2005 22:51:52 +0000 (15:51 -0700)]
[PATCH] dvb: Small cleanup

Miscellaneous cleanup

Signed-off-by: Manu Abraham <manu@kromtek.com>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] dvb: Fix 22k tone control
Manu Abraham [Sat, 28 May 2005 22:51:51 +0000 (15:51 -0700)]
[PATCH] dvb: Fix 22k tone control

Signed-off-by: Manu Abraham <manu@kromtek.com>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] dvb: Fix LNB power switching
Manu Abraham [Sat, 28 May 2005 22:51:51 +0000 (15:51 -0700)]
[PATCH] dvb: Fix LNB power switching

Signed-off-by: Manu Abraham <manu@kromtek.com>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] dvb: Remove unnecessary casts
Manu Abraham [Sat, 28 May 2005 22:51:50 +0000 (15:51 -0700)]
[PATCH] dvb: Remove unnecessary casts

Cleanup unnecessary (and undesirable) casts, demodulator_priv is already a
void*.  Suggestion from Andrew Morton

Signed-off-by: Manu Abraham <manu@kromtek.com>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] dvb: Fix Mini DiSEqC bug
Manu Abraham [Sat, 28 May 2005 22:51:48 +0000 (15:51 -0700)]
[PATCH] dvb: Fix Mini DiSEqC bug

The bug was visible as a warning with gcc-3.4.4 (prerelease)

Message:
drivers/media/dvb/bt8xx/dst.c:1349: warning: initialization from
incompatible pointer type.

Signed-off-by: Manu Abraham <manu@kromtek.com>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] input: Fix fast scrolling scancodes in atkbd.c
Vojtech Pavlik [Sat, 28 May 2005 22:51:47 +0000 (15:51 -0700)]
[PATCH] input: Fix fast scrolling scancodes in atkbd.c

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] intelfb section fix
Patrick McManus [Sat, 28 May 2005 22:51:46 +0000 (15:51 -0700)]
[PATCH] intelfb section fix

On Nov 16 2004 a change to intelfbdrv.c was commited (as part of 0.9.2 it
looks like) that added __initdata to all of the module param variables that
seems to create the opportunity for an oops.

I've recently been chasing an OOPS
(http://marc.theaimsgroup.com/?l=linux-kernel&m=111552250920370&w=2) I
created by reading every file on the /sys file system and I've traced it
back to this code in the intelfbdrv.  Though I had root privs in my initial
problem report, it turns out they are un-necessary to generate the oops -
all you've got to do is "cat /sys/module/intelfb/parameters/mode" enough
times and eventually it will oops.

This is because sysfs automatically exports all module_param declarations
to the sysfs file system..  which means those variables can be dynamically
evaluated at any later time, which of course means marking them __initdata
is a bad idea ;)..  when they happen to be char *'s it is an especially bad
idea ;).

Applying the patch below clears up the OOPS for me.

Signed-off-by: Patrick McManus <mcmanus@ducksong.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] fix jumpy mouse cursor on console
Pavel Machek [Fri, 27 May 2005 19:53:03 +0000 (12:53 -0700)]
[PATCH] fix jumpy mouse cursor on console

Do not send empty events to gpm.  (Keyboards are assumed to have scroll
wheel these days, that makes them part-mouse.  That means typing on
keyboard generates empty mouse events).

From: Dmitry Torokhov <dtor_core@ameritech.net>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] swsusp: ahd_dv_0 can't be stopped
Shaohua Li [Fri, 27 May 2005 19:53:03 +0000 (12:53 -0700)]
[PATCH] swsusp: ahd_dv_0 can't be stopped

This driver wants to set PF_NOFREEZE.

Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix cpufreq vs. sleep issue
Benjamin Herrenschmidt [Fri, 27 May 2005 19:53:02 +0000 (12:53 -0700)]
[PATCH] ppc32: Fix cpufreq vs. sleep issue

Recent kernels occasionally trigger a PMU timeout on some mac laptops,
typically on wakeup from sleep.  This seem to be caused by either a too big
latency caused by the cpufreq switch on wakeup from sleep or by an
interrupt beeing lost due to the reset of the interrupt controller done
during wakeup.

This patch makes that code more robust by stopping PMU auto poll activity
around cpufreq changes on machines that use the PMU for such changes (long
latency switching involving a CPU hard reset and flush of all caches) and
by removing the reset of the open pic interrupt controller on wakeup (that
can cause the loss of an interrupt and Darwin doesn't do it, so it must not
be necessary).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86: fix smp_num_siblings on buggy BIOSes
Siddha, Suresh B [Fri, 27 May 2005 19:53:01 +0000 (12:53 -0700)]
[PATCH] x86: fix smp_num_siblings on buggy BIOSes

This fixes 'smp_num_siblings' value on the systems with a buggy bios,
which sets number of siblings to '2' even when HT is disabled.  (more
details are at http://bugzilla.kernel.org/show_bug.cgi?id=4359)

I am planning to do more cleanup in this area (like moving smp_num_siblings
to per cpuinfo) shortly.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] drop note_interrupt() for per-CPU for proper scaling
John Hawkes [Fri, 27 May 2005 19:53:00 +0000 (12:53 -0700)]
[PATCH] drop note_interrupt() for per-CPU for proper scaling

The "unhandled interrupts" catcher, note_interrupt(), increments a global
desc->irq_count and grossly damages scaling of very large systems, e.g.,
>192p ia64 Altix, because of this highly contented cacheline, especially
for timer interrupts.  384p is severely crippled, and 512p is unuseable.

All calls to note_interrupt() can be disabled by booting with "noirqdebug",
but this disables the useful interrupt checking for all interrupts.

I propose eliminating note_interrupt() for all per-CPU interrupts.  This
was the behavior of linux-2.6.10 and earlier, but in 2.6.11 a code
restructuring added a call to note_interrupt() for per-CPU interrupts.
Besides, note_interrupt() is a bit racy for concurrent CPU calls anyway, as
the desc->irq_count++ increment isn't atomic (which, if done, would make
scaling even worse).

Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] arch/i386/kernel/cpu/intel_cacheinfo.c: section fix
Adrian Bunk [Fri, 27 May 2005 19:52:59 +0000 (12:52 -0700)]
[PATCH] arch/i386/kernel/cpu/intel_cacheinfo.c: section fix

num_cache_leaves is used in __devexit cache_remove_dev() and can therefore
not be __devinit.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc64 iSeries: make virtual DVD-RAMs writable again
Stephen Rothwell [Fri, 27 May 2005 19:52:58 +0000 (12:52 -0700)]
[PATCH] ppc64 iSeries: make virtual DVD-RAMs writable again

It appears that another test has been added in the Uniform CDROM layer that
must be passed before a DVD-RAM is considered writeable.  This patch
implements an emulation of the needed packet command for the viocd driver.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: Fix Alsa PowerMac driver on old machines
Benjamin Herrenschmidt [Fri, 27 May 2005 19:52:57 +0000 (12:52 -0700)]
[PATCH] ppc32: Fix Alsa PowerMac driver on old machines

The g5 support code broke some earlier models unfortunately as those bail
out early from the detect function, before the point where I added the code
to locate the PCI device for use with DMA allocations.

This patch fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] ppc32: small cpufreq update
Benjamin Herrenschmidt [Fri, 27 May 2005 19:52:56 +0000 (12:52 -0700)]
[PATCH] ppc32: small cpufreq update

This patch adds a missing attribute to pmac cpufreq so that
"scaling_available_frequencies" works.  It also cleans up the duplicate
definitions for low and high speed constants.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: John Clemens <clemej@alum.rpi.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] x86_64: signal.c build fix
Oliver Korpilla [Fri, 27 May 2005 19:52:55 +0000 (12:52 -0700)]
[PATCH] x86_64: signal.c build fix

For unspecified reasons, arch/x86_64/kernel/signal.c apparently needs
ia32_unistd.h.

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years ago[PATCH] Fix up pwc driver compilation.
Dave Jones [Sat, 28 May 2005 04:51:24 +0000 (00:51 -0400)]
[PATCH] Fix up pwc driver compilation.

The neutering of the pwc driver was incomplete. It still references
some now-dead files..

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
19 years agoInput: synaptics - reduce verboseness of synaptics driver - there
Dmitry Torokhov [Sat, 28 May 2005 07:12:18 +0000 (02:12 -0500)]
Input: synaptics - reduce verboseness of synaptics driver - there
       is no reason one driver should take 10 lines in dmesg.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
19 years agoInput: yet another model that does not play nicely when i8042 is
Dmitry Torokhov [Sat, 28 May 2005 07:12:10 +0000 (02:12 -0500)]
Input: yet another model that does not play nicely when i8042 is
       put in MUX mode - Fujitsu Lifebook S6230

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
19 years agoInput: automatically disable MUX mode on Toshiba Satellite P10
Dmitry Torokhov [Sat, 28 May 2005 07:12:05 +0000 (02:12 -0500)]
Input: automatically disable MUX mode on Toshiba Satellite P10
       because it interferes with ALPS touchpad detection and
       causes horrible death on reboot. Since P10 does not have
       external PS/2 ports MUX mode does not have any advantages
       over legacy mode anyway.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
19 years agoInput: gunze - fix out-of-bound array access reported by Adrian Bunk.
Dmitry Torokhov [Sat, 28 May 2005 07:12:00 +0000 (02:12 -0500)]
Input: gunze - fix out-of-bound array access reported by Adrian Bunk.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
19 years agoInput: Fix button mapping in joydev - BTN_TRIGGER was being
Vojtech Pavlik [Sat, 28 May 2005 07:11:49 +0000 (02:11 -0500)]
Input: Fix button mapping in joydev - BTN_TRIGGER was being
       mapped twice, resulting in it being the last (instead
       of first) button on a joystick.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
19 years agoInput: Workaround for Sunrex K8561 IR Keyboard/Mouse. The mouse
Vojtech Pavlik [Sat, 28 May 2005 07:11:42 +0000 (02:11 -0500)]
Input: Workaround for Sunrex K8561 IR Keyboard/Mouse. The mouse
       sends an incorrect ID and wasn't recognized.

Reported-by: Stefan Seyfried <seife@suse.de>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
19 years agoInput: Avoid double unregistering of i8042 PnP driver. This can happen
Kurt Garloff [Sat, 28 May 2005 07:11:38 +0000 (02:11 -0500)]
Input: Avoid double unregistering of i8042 PnP driver. This can happen
       when no i8042 controller (not PnP, not legacy) is present.

From: Kurt Garloff <garloff@suse.de>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
19 years agoInput: Tone down the severity of a printk() in i386/ia64 arch code
Dmitry Torokhov [Sat, 28 May 2005 07:11:32 +0000 (02:11 -0500)]
Input: Tone down the severity of a printk() in i386/ia64 arch code
       for i386, it's printed on many machines and usually is not
       a cause for worry.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
19 years agoInput: Only write the CTR in i8042 resume function. Reading it is
Vojtech Pavlik [Sat, 28 May 2005 07:11:27 +0000 (02:11 -0500)]
Input: Only write the CTR in i8042 resume function. Reading it is
       wrong, since it may (will) contain nonsensical data.

Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>