GitHub/exynos8895/android_kernel_samsung_universal8895.git
16 years agopowerpc/pci: Cosmetic cleanups of pci-common.c
Benjamin Herrenschmidt [Mon, 27 Oct 2008 19:48:56 +0000 (19:48 +0000)]
powerpc/pci: Cosmetic cleanups of pci-common.c

This does a few cosmetic cleanups, moving a couple of things around
but without actually changing what the code does.

(There is a minor change in ordering of operations in
pcibios_setup_bus_devices but it should have no impact).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/pci: Fix various pseries PCI hotplug issues
Benjamin Herrenschmidt [Mon, 27 Oct 2008 19:48:52 +0000 (19:48 +0000)]
powerpc/pci: Fix various pseries PCI hotplug issues

The pseries PCI hotplug code has a number of issues, ranging from
incorrect resource setup to crashes, depending on what is added,
when, whether it contains a bridge, etc etc....

This fixes a whole bunch of these, while actually simplifying the code
a bit, using more generic code in the process and factoring out common
code between adding of a PHB, a slot or a device.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/pci: Make pcibios_allocate_bus_resources more robust
Benjamin Herrenschmidt [Mon, 27 Oct 2008 19:48:44 +0000 (19:48 +0000)]
powerpc/pci: Make pcibios_allocate_bus_resources more robust

To properly fix PCI hotplug, it's useful to be able to make the fixup
passes on all devices whether they were just hot plugged or already
there.

However, pcibios_allocate_bus_resources() wouldn't cope well with
being called twice for a given bus.  This makes it ignore resources
that have already been allocated, along with adding a bit of debug
output.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/eeh: Make EEH device add/remove more robust
Benjamin Herrenschmidt [Mon, 27 Oct 2008 19:48:41 +0000 (19:48 +0000)]
powerpc/eeh: Make EEH device add/remove more robust

To properly fix PCI hotplug, it's useful to be able to make the fixup
passes on all devices whether they were just hot plugged or already
there.

The EEH code however used to not be very friendly with calling
eeh_add_device_late() multiple time, and not very rebust in the way it
generally tests whether a device is in the expected state vs. the EEH
code.

This improves it, along with cleaning up a couple of debug printk's.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/pci: Split pcibios_fixup_bus() into bus setup and device setup
Benjamin Herrenschmidt [Mon, 27 Oct 2008 19:48:37 +0000 (19:48 +0000)]
powerpc/pci: Split pcibios_fixup_bus() into bus setup and device setup

Currently, our PCI code uses the pcibios_fixup_bus() callback, which
is called by the generic code when probing PCI buses, for two
different things.

One is to set up things related to the bus itself, such as reading
bridge resources for P2P bridges, fixing them up, or setting up the
iommu's associated with bridges on some platforms.

The other is some setup for each individual device under that bridge,
mostly setting up DMA mappings and interrupts.

The problem is that this approach doesn't work well with PCI hotplug
when an existing bus is re-probed for new children.  We fix this
problem by splitting pcibios_fixup_bus into two routines:

pcibios_setup_bus_self() is now called to setup the bus itself

pcibios_setup_bus_devices() is now called to setup devices

pcibios_fixup_bus() is then modified to call these two after reading the
bridge bases, and the OF based PCI probe is modified to avoid calling
into the first one when rescanning an existing bridge.

[paulus@samba.org - fixed eeh.h for 32-bit compile now that pci-common.c
is including it unconditionally.]

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/pci: Remove pcibios_do_bus_setup()
Benjamin Herrenschmidt [Mon, 27 Oct 2008 19:48:33 +0000 (19:48 +0000)]
powerpc/pci: Remove pcibios_do_bus_setup()

The function pcibios_do_bus_setup() was used by pcibios_fixup_bus()
to perform setup that is different between the 32-bit and 64-bit
code.  This difference no longer exists, thus the function is removed
and the setup now done directly from pci-common.c.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/pci: Use common PHB resource hookup
Benjamin Herrenschmidt [Mon, 27 Oct 2008 19:48:29 +0000 (19:48 +0000)]
powerpc/pci: Use common PHB resource hookup

The 32-bit and 64-bit powerpc PCI code used to set up the resource
pointers of the root bus of a given PHB in completely different
places.

This unifies this in large part, by making 32-bit use a routine very
similar to what 64-bit does when initially scanning the PCI busses.

The actual setup of the PHB resources itself is then moved to a
common function in pci-common.c.

This should cause no functional change on 64-bit.  On 32-bit, the
effect is that the PHB resources are going to be setup a bit earlier,
instead of being setup from pcibios_fixup_bus().

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/pci: Cleanup debug printk's
Benjamin Herrenschmidt [Mon, 27 Oct 2008 19:48:22 +0000 (19:48 +0000)]
powerpc/pci: Cleanup debug printk's

This removes the various DBG() macro from the powerpc PCI code and
makes it use the standard pr_debug instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD
Mark Nelson [Mon, 27 Oct 2008 00:46:51 +0000 (00:46 +0000)]
powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD

Update memcpy() to add two new feature sections: one for aligning the
destination before copying and one for copying using aligned load
and store doubles.

These new feature sections will only affect Power6 and Cell because
the CPU feature bit was only added to these two processors.

Power6 gets its best performance in memcpy() when aligning neither the
source nor the destination, while Cell gets its best performance when
just the destination is aligned. But in order to save on CPU feature
bits we can use the previously added CPU_FTR_CP_USE_DCBTZ feature bit
to differentiate between Power6 and Cell (because CPU_FTR_CP_USE_DCBTZ
was added to Cell but not Power6).

The first feature section acts to nop out the branch that takes us to
the code that aligns us to an eight byte boundary for the destination.
We only want to nop out this branch on Power6.

So the ALT_FTR_SECTION_END() for this feature section creates a test
mask of the two feature bits ORed together and provides an expected
result of just CPU_FTR_UNALIGNED_LD_STD, thus we nop out the branch
if we're on a CPU that has CPU_FTR_UNALIGNED_LD_STD set and
CPU_FTR_CP_USE_DCBTZ unset.

For the second feature section added, if we're on a CPU that has the
CPU_FTR_UNALIGNED_LD_STD bit set then we don't want to do the copy
with aligned loads and stores (and the appropriate shifting left and
right instructions), so we want to nop out the branch to
.Lsrc_unaligned.

The andi. used for this branch is moved to just above the branch
because this allows us to nop out both instructions with just one
feature section which gives us better performance and doesn't hurt
readability which two separate feature sections did.

Moving the andi. to just above the branch doesn't have any noticeable
negative effect on the remaining 64bit processors (the ones that
didn't have this feature bit added).

On Cell this simple modification results in an improvement to measured
memcpy() bandwidth of up to 50% in the hot cache case and up to 15% in
the cold cache case.

On Power6 we get memory bandwidth results that are up to three times
faster in the hot cache case and up to 50% faster in the cold cache
case.

Commit 2a9294369bd020db89bfdf78b84c3615b39a5c84 ("powerpc: Add new CPU
feature: CPU_FTR_CP_USE_DCBTZ") was where CPU_FTR_CP_USE_DCBTZ was
added.

To say that Cell gets its best performance in memcpy() with just the
destination aligned is true but only for the reason that the indirect
shift and rotate instructions, sld and srd, are microcoded on Cell.
This means that either the destination or the source can be aligned,
but not both, and seeing as we get better performance with the
destination aligned we choose this option.

While we're at it make a one line change from cmpldi r1,... to
cmpldi cr1,... for consistency.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Add new CPU feature: CPU_FTR_UNALIGNED_LD_STD
Mark Nelson [Mon, 27 Oct 2008 00:43:02 +0000 (00:43 +0000)]
powerpc: Add new CPU feature: CPU_FTR_UNALIGNED_LD_STD

Add a new CPU feature bit, CPU_FTR_UNALIGNED_LD_STD, to be added
to the 64bit powerpc chips that can do unaligned load double and
store double without any performance hit.

This is added to Power6 and Cell and will be used in the next commit
to disable the code that gets the destination address aligned on
those CPUs where doing that doesn't improve performance.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Update page-in counter for CMM
Brian King [Wed, 22 Oct 2008 05:53:45 +0000 (05:53 +0000)]
powerpc: Update page-in counter for CMM

A new field has been added to the VPA as a method for the client OS to
communicate to firmware the number of page-ins it is performing when
running collaborative memory overcommit.  The hypervisor will use this
information to better determine if a partition is experiencing memory
pressure and needs more memory allocated to it.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/pseries: Fix getting the server number size
Sebastien Dugue [Wed, 22 Oct 2008 04:36:32 +0000 (04:36 +0000)]
powerpc/pseries: Fix getting the server number size

The 'ibm,interrupt-server#-size' properties are not in the cpu nodes,
which is where we currently look for them, but rather live under the
interrupt source controller nodes (which have "ibm,ppc-xics" in their
compatible property).

This moves the code that looks for the ibm,interrupt-server#-size
properties from xics_update_irq_servers() into xics_init_IRQ().

Also this adds a check for mismatched sizes across the interrupt
source controller nodes.  Not sure this is necessary as in this case
the firmware might be seriously busted.

This property only appears on POWER6 boxes and is only used in the
set-indicator(gqirm) call, and apparently firmware currently ignores
the value we pass.  Nevertheless we need to fix it in case future
firmware versions use it.

Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Remove device_type = "rtc" properties in .dts files
Anton Vorontsov [Tue, 21 Oct 2008 08:58:44 +0000 (08:58 +0000)]
powerpc: Remove device_type = "rtc" properties in .dts files

We don't want to encourage the device_type usage.  It isn't used in
the code, so we can simply remove it from the dts files.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Silence software timebase sync
Benjamin Herrenschmidt [Tue, 14 Oct 2008 18:25:28 +0000 (18:25 +0000)]
powerpc: Silence software timebase sync

When no hardware method is provided to sync the timebase registers
across the machine, and the platform doesn't sync them for us, then we
use a generic software implementation.  Currently, the code for that
has many printks, and they don't have log levels.  Most of the printks
are only useful for debugging the code, and since we haven't had any
problems with it for years, this turns them into pr_debug.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Fix domain numbers in /proc on 64-bit
Benjamin Herrenschmidt [Thu, 2 Oct 2008 14:12:51 +0000 (14:12 +0000)]
powerpc: Fix domain numbers in /proc on 64-bit

The code to properly expose domain numbers in /proc is somewhat
bogus on ppc64 as it depends on the "buid" field being non-0,
but that field is really pseries specific.

This removes that code and makes ppc64 use the same code as 32-bit
which effectively decides whether to expose domains based on
ppc_pci_flags set by the platform, and sets the default for 64-bit
to enable domains and enable compatibility for domain 0 (which
strips the domain number for domain 0 to help with X servers).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc: Fix "unused variable" warning in pci_dlpar.c
Stephen Rothwell [Sun, 2 Nov 2008 21:18:24 +0000 (21:18 +0000)]
powerpc: Fix "unused variable" warning in pci_dlpar.c

This gets rid of this build warning:

arch/powerpc/platforms/pseries/pci_dlpar.c: In function 'init_phb_dynamic':
arch/powerpc/platforms/pseries/pci_dlpar.c:192: warning: unused variable 'b'

This is one of the very few warnings left in a ppc64_defconfig build and
getting rid of it will make it easier to see future introduced ones (in
fact this was introduced very recently).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/cell: Fix compile error in ras.c
Alexey Dobriyan [Sun, 2 Nov 2008 10:21:57 +0000 (10:21 +0000)]
powerpc/cell: Fix compile error in ras.c

This fixes this error on Cell when CONFIG_KEXEC = n:

arch/powerpc/platforms/cell/ras.c:299: error: implicit declaration of function 'crash_shutdown_register'

We have to include <asm/kexec.h> because it contains the dummy
definition of crash_shutdown_register that is used when
CONFIG_KEXEC=n, but <linux/kexec.h> doesn't include <asm/kexec.h> in
that case.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agopowerpc/ps3: Fix compile error in ps3-lpm.c
Alexey Dobriyan [Sun, 2 Nov 2008 07:26:51 +0000 (07:26 +0000)]
powerpc/ps3: Fix compile error in ps3-lpm.c

Compiling with CONFIG_SMP = n and CONFIG_PS3_LPM != n gives this error:

drivers/ps3/ps3-lpm.c:838: error: implicit declaration of function 'get_hard_smp_processor_id'

This fixes it.  We have to include <asm/smp.h> rather than
<linux/smp.h> because the UP definition of get_hard_smp_processor_id()
is in <asm/smp.h>, and <linux/smp.h> only includes <asm/smp.h> if
CONFIG_SMP = y.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 4 Nov 2008 16:30:12 +0000 (08:30 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  xfrm: Fix xfrm_policy_gc_lock handling.
  niu: Use pci_ioremap_bar().
  bnx2x: Version Update
  bnx2x: Calling netif_carrier_off at the end of the probe
  bnx2x: PCI configuration bug on big-endian
  bnx2x: Removing the PMF indication when unloading
  mv643xx_eth: fix SMI bus access timeouts
  net: kconfig cleanup
  fs_enet: fix polling
  XFRM: copy_to_user_kmaddress() reports local address twice
  SMC91x: Fix compilation on some platforms.
  udp: Fix the SNMP counter of UDP_MIB_INERRORS
  udp: Fix the SNMP counter of UDP_MIB_INDATAGRAMS
  drivers/net/smc911x.c: Fix lockdep warning on xmit.

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Tue, 4 Nov 2008 16:19:01 +0000 (08:19 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: mask off DET when restoring SControl for detach
  libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it
  libata: Fix a potential race condition in ata_scsi_park_show()
  sata_nv: fix generic, nf2/3 detection regression
  sata_via: restore vt*_prepare_host error handling
  sata_promise: add ATA engine reset to reset ops

16 years agodrivers: remove duplicated #include
Jianjun Kong [Tue, 4 Nov 2008 13:47:07 +0000 (21:47 +0800)]
drivers: remove duplicated #include

Signed-off-by: Jianjun Kong <jianjun@zeuux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agolibata: mask off DET when restoring SControl for detach
Tejun Heo [Mon, 3 Nov 2008 10:27:07 +0000 (19:27 +0900)]
libata: mask off DET when restoring SControl for detach

libata restores SControl on detach; however, trying to restore
non-zero DET can cause undeterministic behavior including PMP device
going offline till power cycling.  Mask off DET when restoring
SControl.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agolibata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it
Tejun Heo [Mon, 3 Nov 2008 10:01:09 +0000 (19:01 +0900)]
libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it

libata always uses PIO for ATAPI commands when the number of bytes to
transfer isn't multiple of 16 but quantum DAT72 chokes on odd bytes
PIO transfers.  Implement a horkage to skip the mod16 check and apply
it to the quantum device.

This is reported by John Clark in the following thread.

  http://thread.gmane.org/gmane.linux.ide/34748

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: John Clark <clarkjc@runbox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agolibata: Fix a potential race condition in ata_scsi_park_show()
Elias Oltmanns [Mon, 3 Nov 2008 10:01:08 +0000 (19:01 +0900)]
libata: Fix a potential race condition in ata_scsi_park_show()

Peter Moulder has pointed out that there is a slight chance that a
negative value might be passed to jiffies_to_msecs() in
ata_scsi_park_show(). This is fixed by saving the value of jiffies in a
local variable, thus also reducing code since the volatile variable
jiffies is accessed only once.

Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: Tejun Heo <tj.kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agosata_nv: fix generic, nf2/3 detection regression
Tejun Heo [Mon, 3 Nov 2008 03:37:49 +0000 (12:37 +0900)]
sata_nv: fix generic, nf2/3 detection regression

All three flavors of sata_nv's are different in how their hardreset
behaves.

* generic: Hardreset is not reliable.  Link often doesn't come online
  after hardreset.

* nf2/3: A little bit better - link comes online with longer debounce
  timing.  However, nf2/3 can't reliable wait for the first D2H
  Register FIS, so it can't wait for device readiness or classify the
  device after hardreset.  Follow-up SRST required.

* ck804: Hardreset finally works.

The core layer change to prefer hardreset and follow up changes
exposed the above issues and caused various detection regressions for
all three flavors.  This patch, hopefully, fixes all the known issues
and should make sata_nv error handling more reliable.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agosata_via: restore vt*_prepare_host error handling
Marcin Slusarz [Sun, 2 Nov 2008 21:18:52 +0000 (22:18 +0100)]
sata_via: restore vt*_prepare_host error handling

commit b9d5b89b487517cbd4cb4702da829e07ef9e4432 (sata_via: fix support
for 5287) accidently (?) removed vt*_prepare_host error handling - restore it

catched by gcc:
drivers/ata/sata_via.c: In function 'svia_init_one':
drivers/ata/sata_via.c:567: warning: 'host' may be used uninitialized in this function

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joseph Chan <JosephChan@via.com.tw>
Cc: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agosata_promise: add ATA engine reset to reset ops
Mikael Pettersson [Fri, 31 Oct 2008 07:03:55 +0000 (08:03 +0100)]
sata_promise: add ATA engine reset to reset ops

Promise ATA engines need to be reset when errors occur.
That's currently done for errors detected by sata_promise itself,
but it's not done for errors like timeouts detected outside of
the low-level driver.

The effect of this omission is that a timeout tends to result
in a sequence of failed COMRESETs after which libata EH gives
up and disables the port. At that point the port's ATA engine
hangs and even reloading the driver will not resume it.

To fix this, make sata_promise override ->hardreset on SATA
ports with code which calls pdc_reset_port() on the port in
question before calling libata's hardreset. PATA ports don't
use ->hardreset, so for those we override ->softreset instead.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoxfrm: Fix xfrm_policy_gc_lock handling.
Alexey Dobriyan [Tue, 4 Nov 2008 03:11:29 +0000 (19:11 -0800)]
xfrm: Fix xfrm_policy_gc_lock handling.

From: Alexey Dobriyan <adobriyan@gmail.com>

Based upon a lockdep trace by Simon Arlott.

xfrm_policy_kill() can be called from both BH and
non-BH contexts, so we have to grab xfrm_policy_gc_lock
with BH disabling.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoniu: Use pci_ioremap_bar().
David S. Miller [Tue, 4 Nov 2008 01:05:16 +0000 (17:05 -0800)]
niu: Use pci_ioremap_bar().

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2x: Version Update
Eilon Greenstein [Tue, 4 Nov 2008 00:46:58 +0000 (16:46 -0800)]
bnx2x: Version Update

Updating the version

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2x: Calling netif_carrier_off at the end of the probe
Eilon Greenstein [Tue, 4 Nov 2008 00:46:40 +0000 (16:46 -0800)]
bnx2x: Calling netif_carrier_off at the end of the probe

netif_carrier_off was called too early at the probe. In case of failure
or simply bad timing, this can cause a fatal error since linkwatch_event
might run too soon.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2x: PCI configuration bug on big-endian
Eilon Greenstein [Tue, 4 Nov 2008 00:46:19 +0000 (16:46 -0800)]
bnx2x: PCI configuration bug on big-endian

The current code read nothing but zeros on big-endian (wrong part of the
32bits). This caused poor performance on big-endian machines. Though this
issue did not cause the system to crash, the performance is significantly
better with the fix so I view it as critical bug fix.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2x: Removing the PMF indication when unloading
Eilon Greenstein [Tue, 4 Nov 2008 00:45:55 +0000 (16:45 -0800)]
bnx2x: Removing the PMF indication when unloading

When the PMF flag is set, the driver can access the HW freely. When the
driver is unloaded, it should not access the HW. The problem caused fatal
errors when "ethtool -i" was called after the calling instance was unloaded
and another instance was already loaded

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agomv643xx_eth: fix SMI bus access timeouts
Lennert Buytenhek [Sat, 1 Nov 2008 05:32:20 +0000 (06:32 +0100)]
mv643xx_eth: fix SMI bus access timeouts

The mv643xx_eth mii bus implementation uses wait_event_timeout() to
wait for SMI completion interrupts.

If wait_event_timeout() would return zero, mv643xx_eth would conclude
that the SMI access timed out, but this is not necessarily true --
wait_event_timeout() can also return zero in the case where the SMI
completion interrupt did happen in time but where it took longer than
the requested timeout for the process performing the SMI access to be
scheduled again.  This would lead to occasional SMI access timeouts
when the system would be under heavy load.

The fix is to ignore the return value of wait_event_timeout(), and
to re-check the SMI done bit after wait_event_timeout() returns to
determine whether or not the SMI access timed out.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agonet: kconfig cleanup
Jeff Kirsher [Mon, 3 Nov 2008 04:30:33 +0000 (20:30 -0800)]
net: kconfig cleanup

The bool kconfig option added to ixgbe and myri10ge for DCA is ambigous,
so this patch adds a description to the kconfig option.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agofs_enet: fix polling
Alexey Dobriyan [Sun, 2 Nov 2008 14:49:59 +0000 (17:49 +0300)]
fs_enet: fix polling

1. compile fix for irqreturn_t type change
2. restore ->poll_controller after CONFIG_PPC_CPM_NEW_BINDING transition

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Mon, 3 Nov 2008 19:43:59 +0000 (11:43 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix renaming one hardlink on top of another
  [CIFS] fix error in smb_send2
  [CIFS] Reduce number of socket retries in large write path

16 years agocifs: fix renaming one hardlink on top of another
Jeff Layton [Mon, 3 Nov 2008 19:05:08 +0000 (14:05 -0500)]
cifs: fix renaming one hardlink on top of another

cifs: fix renaming one hardlink on top of another

POSIX says that renaming one hardlink on top of another to the same
inode is a no-op. We had the logic mostly right, but forgot to clear
the return code.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
16 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 3 Nov 2008 18:21:40 +0000 (10:21 -0800)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing, ring-buffer: add paranoid checks for loops
  ftrace: use kretprobe trampoline name to test in output
  tracing, alpha: undefined reference to `save_stack_trace'

16 years agoMerge branch 'io-mappings-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 3 Nov 2008 18:15:40 +0000 (10:15 -0800)]
Merge branch 'io-mappings-for-linus-2' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'io-mappings-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  io mapping: clean up #ifdefs
  io mapping: improve documentation
  i915: use io-mapping interfaces instead of a variety of mapping kludges
  resources: add io-mapping functions to dynamically map large device apertures
  x86: add iomap_atomic*()/iounmap_atomic() on 32-bit using fixmaps

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 3 Nov 2008 18:14:59 +0000 (10:14 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda: make a STAC_DELL_EQ option
  ALSA: emu10k1 - Add more invert_shared_spdif flag to Audigy models
  ALSA: hda - Add a quirk for another Acer Aspire (1025:0090)
  ALSA: remove direct access of dev->bus_id in sound/isa/*
  sound: struct device - replace bus_id with dev_name(), dev_set_name()
  ALSA: Fix PIT lockup on some chipsets when using the PC-Speaker
  ALSA: rawmidi - Add open check in rawmidi callbacks
  ALSA: hda - Add digital-mic for ALC269 auto-probe mode
  ALSA: hda - Disable broken mic auto-muting in Realtek codes

16 years agoMerge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan...
Linus Torvalds [Mon, 3 Nov 2008 17:59:01 +0000 (09:59 -0800)]
Merge branch 'proc-linus' of git://git./linux/kernel/git/adobriyan/proc

* 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  proc: revert /proc/uptime to ->read_proc hook

16 years agoMerge branch 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Mon, 3 Nov 2008 17:58:40 +0000 (09:58 -0800)]
Merge branch 'drm-next' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  i915: Add GEM ioctl to get available aperture size.
  drm/radeon: fixup further bus mastering confusion.
  build fix: CONFIG_DRM_I915=y && CONFIG_ACPI=n

16 years agoio mapping: clean up #ifdefs
Keith Packard [Mon, 3 Nov 2008 17:21:45 +0000 (18:21 +0100)]
io mapping: clean up #ifdefs

Impact: cleanup

clean up ifdefs: change #ifdef CONFIG_X86_32/64 to
CONFIG_HAVE_ATOMIC_IOMAP.

flip around the #ifdef sections to clean up the structure.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoio mapping: improve documentation
Keith Packard [Mon, 3 Nov 2008 17:21:44 +0000 (18:21 +0100)]
io mapping: improve documentation

Impact: add documentation

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoMerge branches 'topic/fix/misc' and 'topic/fix/hda' into for-linus
Takashi Iwai [Mon, 3 Nov 2008 15:28:24 +0000 (16:28 +0100)]
Merge branches 'topic/fix/misc' and 'topic/fix/hda' into for-linus

16 years agoALSA: hda: make a STAC_DELL_EQ option
Matthew Ranostay [Mon, 3 Nov 2008 13:12:43 +0000 (08:12 -0500)]
ALSA: hda: make a STAC_DELL_EQ option

Add support for explicitly enabling the EQ distortion hack for
systems without software biquad support.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agotracing, ring-buffer: add paranoid checks for loops
Steven Rostedt [Fri, 31 Oct 2008 13:58:35 +0000 (09:58 -0400)]
tracing, ring-buffer: add paranoid checks for loops

While writing a new tracer, I had a bug where I caused the ring-buffer
to recurse in a bad way. The bug was with the tracer I was writing
and not the ring-buffer itself. But it took a long time to find the
problem.

This patch adds paranoid checks into the ring-buffer infrastructure
that will catch bugs of this nature.

Note: I put the bug back in the tracer and this patch showed the error
      nicely and prevented the lockup.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoftrace: use kretprobe trampoline name to test in output
Steven Rostedt [Fri, 31 Oct 2008 19:44:07 +0000 (15:44 -0400)]
ftrace: use kretprobe trampoline name to test in output

Impact: ia64+tracing build fix

When a function is kprobed, the return address is set to the
kprobe_trampoline, or something similar. This caused the output
of the trace to look confusing when the parent seemed to be this
"kprobe_trampoline" function.

To fix this, Abhishek Sagar added a test of the instruction pointer
of the parent to see if it matched the kprobe_trampoline. If it
did, the output would print a "[unknown/kretprobe'd]" instead.

Unfortunately, not all archs do this the same way, and the trampoline
function may not be exported, which causes failures in builds.

This patch will compare the name instead of the pointer to see
if it matches. This prevents us from depending on a function from
being exported, and should work on all archs. The worst that can
happen is that an arch might use a different name and then we
go back to the confusing output. At least the arch will still build.

Reported-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Acked-by: Abhishek Sagar <sagar.abhishek@gmail.com>
16 years agoXFRM: copy_to_user_kmaddress() reports local address twice
Arnaud Ebalard [Mon, 3 Nov 2008 09:30:23 +0000 (01:30 -0800)]
XFRM: copy_to_user_kmaddress() reports local address twice

While adding support for MIGRATE/KMADDRESS in strongSwan (as specified
in draft-ebalard-mext-pfkey-enhanced-migrate-00), Andreas Steffen
noticed that XFRMA_KMADDRESS attribute passed to userland contains the
local address twice (remote provides local address instead of remote
one).

This bug in copy_to_user_kmaddress() affects only key managers that use
native XFRM interface (key managers that use PF_KEY are not affected).

For the record, the bug was in the initial changeset I posted which
added support for KMADDRESS (13c1d18931ebb5cf407cb348ef2cd6284d68902d
'xfrm: MIGRATE enhancements (draft-ebalard-mext-pfkey-enhanced-migrate)').

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Reported-by: Andreas Steffen <andreas.steffen@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoALSA: emu10k1 - Add more invert_shared_spdif flag to Audigy models
Takashi Iwai [Mon, 3 Nov 2008 09:21:36 +0000 (10:21 +0100)]
ALSA: emu10k1 - Add more invert_shared_spdif flag to Audigy models

Reported in Novell bnc#440862:
    https://bugzilla.novell.com/show_bug.cgi?id=440862

Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agotracing, alpha: undefined reference to `save_stack_trace'
Al Viro [Fri, 31 Oct 2008 19:50:41 +0000 (19:50 +0000)]
tracing, alpha: undefined reference to `save_stack_trace'

Impact: build fix on !stacktrace architectures

only select STACKTRACE on architectures that have STACKTRACE_SUPPORT

... since we also need to ifdef out the guts of ftrace_trace_stack().
We also want to disallow setting TRACE_ITER_STACKTRACE in trace_flags
on such configs, but that can wait.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agoALSA: hda - Add a quirk for another Acer Aspire (1025:0090)
Takashi Iwai [Mon, 3 Nov 2008 09:07:43 +0000 (10:07 +0100)]
ALSA: hda - Add a quirk for another Acer Aspire (1025:0090)

Added a quirk for another Acer Aspier laptop (1025:0090) with ALC883
codec.  Reported in Novell bnc#426935:
    https://bugzilla.novell.com/show_bug.cgi?id=426935

Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoSMC91x: Fix compilation on some platforms.
David S. Miller [Mon, 3 Nov 2008 08:04:24 +0000 (00:04 -0800)]
SMC91x: Fix compilation on some platforms.

This reverts 51ac3beffd4afaea4350526cf01fe74aaff25eff ('SMC91x: delete
unused local variable "lp"') and adds __maybe_unused markers to these
(potentially) unused variables.

The issue is that in some configurations SMC_IO_SHIFT evaluates
to '(lp->io_shift)', but in some others it's plain '0'.

Based upon a build failure report from Manuel Lauss.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoALSA: remove direct access of dev->bus_id in sound/isa/*
Takashi Iwai [Mon, 3 Nov 2008 07:51:33 +0000 (08:51 +0100)]
ALSA: remove direct access of dev->bus_id in sound/isa/*

Removed the direct accesses of dev->bus_id in sound/isa/* by replacement
with dev_err() or dev_warn() functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agosound: struct device - replace bus_id with dev_name(), dev_set_name()
Kay Sievers [Sun, 2 Nov 2008 02:50:35 +0000 (03:50 +0100)]
sound: struct device - replace bus_id with dev_name(), dev_set_name()

[stripped sound/isa/* changes, replaced with the next patch -- tiwai]

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: Fix PIT lockup on some chipsets when using the PC-Speaker
Zoltan Devai [Sun, 2 Nov 2008 23:30:28 +0000 (00:30 +0100)]
ALSA: Fix PIT lockup on some chipsets when using the PC-Speaker

Fix PIT lockup on some chipsets when using the PC-Speaker.

Signed-off-by: Zoltan Devai <zdevai@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoALSA: rawmidi - Add open check in rawmidi callbacks
Takashi Iwai [Mon, 3 Nov 2008 07:17:05 +0000 (08:17 +0100)]
ALSA: rawmidi - Add open check in rawmidi callbacks

The drivers (e.g. mtpav) may call rawmidi functions in irq handlers
even though the streams are not opened.  This results in Oops or panic.

This patch adds the rawmidi state check before actually operating the
rawmidi buffers.

Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 years agoudp: Fix the SNMP counter of UDP_MIB_INERRORS
Wei Yongjun [Sun, 2 Nov 2008 16:14:27 +0000 (16:14 +0000)]
udp: Fix the SNMP counter of UDP_MIB_INERRORS

UDP packets received in udpv6_recvmsg() are not only IPv6 UDP packets, but
also have IPv4 UDP packets, so when do the counter of UDP_MIB_INERRORS in
udpv6_recvmsg(), we should check whether the packet is a IPv6 UDP packet
or a IPv4 UDP packet.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoudp: Fix the SNMP counter of UDP_MIB_INDATAGRAMS
Wei Yongjun [Sun, 2 Nov 2008 16:11:01 +0000 (16:11 +0000)]
udp: Fix the SNMP counter of UDP_MIB_INDATAGRAMS

If UDP echo is sent to xinetd/echo-dgram, the UDP reply will be received
at the sender. But the SNMP counter of UDP_MIB_INDATAGRAMS will be not
increased, UDP6_MIB_INDATAGRAMS will be increased instead.

  Endpoint A                      Endpoint B
  UDP Echo request ----------->
  (IPv4, Dst port=7)
                   <----------    UDP Echo Reply
                                  (IPv4, Src port=7)

This bug is come from this patch cb75994ec311b2cd50e5205efdcc0696abd6675d.

It do counter UDP[6]_MIB_INDATAGRAMS until udp[v6]_recvmsg. Because
xinetd used IPv6 socket to receive UDP messages, thus, when received
UDP packet, the UDP6_MIB_INDATAGRAMS will be increased in function
udpv6_recvmsg() even if the packet is a IPv4 UDP packet.

This patch fixed the problem.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoi915: Add GEM ioctl to get available aperture size.
Eric Anholt [Thu, 23 Oct 2008 04:40:13 +0000 (21:40 -0700)]
i915: Add GEM ioctl to get available aperture size.

This will let userland know when to submit its batchbuffers, before they get
too big to fit in the aperture.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
16 years agoLinux v2.6.28-rc3
Linus Torvalds [Sun, 2 Nov 2008 22:17:19 +0000 (14:17 -0800)]
Linux v2.6.28-rc3

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Sun, 2 Nov 2008 21:32:26 +0000 (13:32 -0800)]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide-gd: re-get capacity on revalidate
  tx4938ide: Avoid underflow on calculation of a wait cycle
  tx4938ide: Do not call devm_ioremap for whole 128KB
  tx4938ide: Check minimum cycle time and SHWT range (v2)
  ide: Switch to a common address
  ide-cd: fix DMA alignment regression

16 years agoide-gd: re-get capacity on revalidate
Borislav Petkov [Sun, 2 Nov 2008 20:40:10 +0000 (21:40 +0100)]
ide-gd: re-get capacity on revalidate

We need to re-get a removable media's capacity when revalidating the
disk so that its partitions get rescanned by the block layer.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: axboe@kernel.dk
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agotx4938ide: Avoid underflow on calculation of a wait cycle
Atsushi Nemoto [Sun, 2 Nov 2008 20:40:10 +0000 (21:40 +0100)]
tx4938ide: Avoid underflow on calculation of a wait cycle

Make 'wt' variable signed while it can be negative during calculation.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: sshtylyov@ru.mvista.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agotx4938ide: Do not call devm_ioremap for whole 128KB
Atsushi Nemoto [Sun, 2 Nov 2008 20:40:09 +0000 (21:40 +0100)]
tx4938ide: Do not call devm_ioremap for whole 128KB

Call devm_ioremap() for CS0 and CS1 separetely.
And some style cleanups.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agotx4938ide: Check minimum cycle time and SHWT range (v2)
Atsushi Nemoto [Sun, 2 Nov 2008 20:40:09 +0000 (21:40 +0100)]
tx4938ide: Check minimum cycle time and SHWT range (v2)

SHWT value is used as address valid to -CSx assertion and -CSx to -DIOx
assertion setup time, and contrarywise, -DIOx to -CSx release and -CSx
release to address invalid hold time, so it actualy applies 4 times and
so constitutes -DIOx recovery time.  Check requirement of the recovery
time and cycle time.  Also check SHWT maximum value.

Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: Switch to a common address
Alan Cox [Sun, 2 Nov 2008 20:40:08 +0000 (21:40 +0100)]
ide: Switch to a common address

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide-cd: fix DMA alignment regression
Borislav Petkov [Sun, 2 Nov 2008 20:40:07 +0000 (21:40 +0100)]
ide-cd: fix DMA alignment regression

e5318b531b008c79d2a0c0df06a7b8628da38e2f ("ide: use the dma safe check for
REQ_TYPE_ATA_PC") introduced a regression which caused some ATAPI drives to
turn off DMA for REQ_TYPE_BLOCK_PC commands while burning and thus degrading
performance and ultimately causing an excessive amount of underruns.

The issue is documented also in:
http://bugzilla.kernel.org/show_bug.cgi?id=11742.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Valerio Passini <valerio.passini@unicam.it>
[bart: fixup patch description per comments from Sergei Shtylyov]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sun, 2 Nov 2008 18:16:44 +0000 (10:16 -0800)]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix PCI resource mapping on sparc64
  sparc64: Kill annoying warning when building compat_binfmt_elf.o
  sparc32: kernel/trace/trace.c wants DIE_OOPS
  sparc64: Fix __copy_{to,from}_user_inatomic defines.

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 2 Nov 2008 18:15:52 +0000 (10:15 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  af_unix: netns: fix problem of return value
  IRDA: remove double inclusion of module.h
  udp: multicast packets need to check namespace
  net: add documentation for skb recycling
  key: fix setkey(8) policy set breakage
  bpa10x: free sk_buff with kfree_skb
  xfrm: do not leak ESRCH to user space
  net: Really remove all of LOOPBACK_TSO code.
  netfilter: nf_conntrack_proto_gre: switch to register_pernet_gen_subsys()
  netns: add register_pernet_gen_subsys/unregister_pernet_gen_subsys
  net: delete excess kernel-doc notation
  pppoe: Fix socket leak.
  gianfar: Don't reset TBI<->SerDes link if it's already up
  gianfar: Fix race in TBI/SerDes configuration
  at91_ether: request/free GPIO for PHY interrupt
  amd8111e: fix dma_free_coherent context
  atl1: fix vlan tag regression
  SMC91x: delete unused local variable "lp"
  myri10ge: fix stop/go mmio ordering
  bonding: fix panic when taking bond interface down before removing module
  ...

16 years agolinux/string.h: fix comment typo
Jeff Garzik [Sun, 2 Nov 2008 14:51:27 +0000 (09:51 -0500)]
linux/string.h: fix comment typo

s/user/used/

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agodrivers/net/smc911x.c: Fix lockdep warning on xmit.
Will Newton [Tue, 28 Oct 2008 10:52:36 +0000 (10:52 +0000)]
drivers/net/smc911x.c: Fix lockdep warning on xmit.

dev_kfree_skb should not be called with irqs disabled, use dev_kfree_skb_irq
instead. The warning caused looks like this:

======================================================
[ INFO: hard-safe -> hard-unsafe lock order detected ]
2.6.28-rc1 #273
------------------------------------------------------
swapper/0 [HC0[0]:SC1[2]:HE0:SE0] is trying to acquire:
 (clock-AF_INET){-..+}, at: [<4015c17c>] _sock_def_write_space+0x28/0xd8

and this task is already holding:
 (&lp->lock){++..}, at: [<4013f230>] _smc911x_hard_start_xmit+0x30/0x4b8
which would create a new lock dependency:
 (&lp->lock){++..} -> (clock-AF_INET){-..+}

Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agosparc64: Fix PCI resource mapping on sparc64
Max Dmitrichenko [Sun, 2 Nov 2008 07:34:10 +0000 (00:34 -0700)]
sparc64: Fix PCI resource mapping on sparc64

There is a problem discovered in recent versions of ATI Mach64 driver
in X.org on sparc64 architecture. In short, the driver fails to mmap
MMIO aperture (PCI resource #2).

I've found that kernel's __pci_mmap_make_offset() returns EINVAL. It
checks whether user attempts to mmap more than the resource length,
which is 0x1000 bytes in our case. But PAGE_SIZE on SPARC64 is 0x2000
and this is what actually is being mmaped. So __pci_mmap_make_offset()
failed for this PCI resource.

Signed-off-by: Max Dmitrichenko <dmitrmax@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agosparc64: Kill annoying warning when building compat_binfmt_elf.o
David S. Miller [Sun, 2 Nov 2008 07:15:38 +0000 (00:15 -0700)]
sparc64: Kill annoying warning when building compat_binfmt_elf.o

GCC warns because some tests against 32-bit values never evaluate to
true due to how TASK_SIZE is defined.

I always wanted to mimick powerpc's definition of TASK_SIZE, which
is simply TASK_SIZE_OF(current) and that also fixes the warning.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agosparc32: kernel/trace/trace.c wants DIE_OOPS
Al Viro [Sun, 2 Nov 2008 04:44:01 +0000 (21:44 -0700)]
sparc32: kernel/trace/trace.c wants DIE_OOPS

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agosparc64: Fix __copy_{to,from}_user_inatomic defines.
Hugh Dickins [Sun, 2 Nov 2008 04:41:40 +0000 (21:41 -0700)]
sparc64: Fix __copy_{to,from}_user_inatomic defines.

Alexander Beregalov reports oops in __bzero() called from
copy_from_user_fixup() called from iov_iter_copy_from_user_atomic(),
when running dbench on tmpfs on sparc64: its __copy_from_user_inatomic
and __copy_to_user_inatomic should be avoiding, not calling, the fixups.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoaf_unix: netns: fix problem of return value
Jianjun Kong [Sun, 2 Nov 2008 04:37:27 +0000 (21:37 -0700)]
af_unix: netns: fix problem of return value

fix problem of return value

net/unix/af_unix.c: unix_net_init()
when error appears, it should return 'error', not always return 0.

Signed-off-by: Jianjun Kong <jianjun@zeuux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoIRDA: remove double inclusion of module.h
Alexander Beregalov [Sun, 2 Nov 2008 04:30:50 +0000 (21:30 -0700)]
IRDA: remove double inclusion of module.h

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoudp: multicast packets need to check namespace
Eric Dumazet [Sun, 2 Nov 2008 04:22:23 +0000 (21:22 -0700)]
udp: multicast packets need to check namespace

Current UDP multicast delivery is not namespace aware.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agonet: add documentation for skb recycling
Stephen Hemminger [Sun, 2 Nov 2008 04:01:09 +0000 (21:01 -0700)]
net: add documentation for skb recycling

Commit 04a4bb55bcf35b63d40fd2725e58599ff8310dd7 ("net: add
skb_recycle_check() to enable netdriver skb recycling") added a
method for network drivers to recycle skbuffs, but while use of
this mechanism was documented in the commit message, it should
really have been added as a docbook comment as well -- this
patch does that.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agosparc32: kernel/trace/trace.c wants DIE_OOPS
Al Viro [Sat, 1 Nov 2008 18:20:29 +0000 (18:20 +0000)]
sparc32: kernel/trace/trace.c wants DIE_OOPS

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoel3_common_init() should be __devinit, not __init
Al Viro [Sat, 1 Nov 2008 18:20:19 +0000 (18:20 +0000)]
el3_common_init() should be __devinit, not __init

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomissing dependencies on HAVE_CLK in drivers/mfd
Al Viro [Sat, 1 Nov 2008 18:19:59 +0000 (18:19 +0000)]
missing dependencies on HAVE_CLK in drivers/mfd

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agosection fixes for cirrusfb
Al Viro [Sat, 1 Nov 2008 18:20:39 +0000 (18:20 +0000)]
section fixes for cirrusfb

cirrusfb_zorro_unmap() may be called both from __devexit and (on
cleanup path) from __devinit.  So it needs to be a normal function,
same as for cirrusfb_pci_unmap()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoPM_TEST_SUSPEND should depend on RTC_CLASS, not RTC_LIB
Al Viro [Sat, 1 Nov 2008 18:20:09 +0000 (18:20 +0000)]
PM_TEST_SUSPEND should depend on RTC_CLASS, not RTC_LIB

Insufficient dependency - we really want CONFIG_RTC_CLASS=y there.
That will give us CONFIG_RTC_LIB=y, so the old dependency can be
simply replaced.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agooss: fix O_NONBLOCK in dmasound_core
Al Viro [Sat, 1 Nov 2008 18:19:49 +0000 (18:19 +0000)]
oss: fix O_NONBLOCK in dmasound_core

We broke O_NONBLOCK handling in OSS dmasound_core in 2.3.11-pre3 - the
original code copied f_flags to open_mode and then checked for
O_NONBLOCK in there, but that got changed to copying f_mode and
O_NONBLOCK has not reached that field in any kernel version.

Since we do not care for any other bits, the fix is obvious...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 1 Nov 2008 17:36:30 +0000 (10:36 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix AMDC1E and XTOPOLOGY conflict in cpufeature
  x86: build fix

16 years agoinit/do_mounts_md.c: remove duplicated #include
Huang Weiyi [Fri, 31 Oct 2008 04:47:23 +0000 (12:47 +0800)]
init/do_mounts_md.c: remove duplicated #include

Removed duplicated #include <linux/delay.h> in init/do_mounts_md.c.

The same compile error ("error: implicit declaration of function
'msleep'") got fixed twice:

 - f8b77d39397e1510b1a3bcfd385ebd1a45aae77f ("init/do_mounts_md.c:
   msleep compile fix")

 - 73b4a24f5ff09389ba6277c53a266b142f655ed2 ("init/do_mounts_md.c must
   #include <linux/delay.h>")

by people adding the <linux/delay.h> include in two slightly different
places.  Andrew's quilt scripts happily ignore the fuzz, and will
re-apply the patch even though they had conflicts.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agox86: Clean up late e820 resource allocation
Linus Torvalds [Sat, 1 Nov 2008 17:17:22 +0000 (10:17 -0700)]
x86: Clean up late e820 resource allocation

This makes the late e820 resources use 'insert_resource_expand_to_fit()'
instead of doing a 'reserve_region_with_split()', and also avoids
marking them as IORESOURCE_BUSY.

This results in us being perfectly happy to use pre-existing PCI
resources even if they were marked as being in a reserved region, while
still avoiding any _new_ allocations in the reserved regions.  It also
makes for a simpler and more accurate resource tree.

Example resource allocation from Jonathan Corbet, who has firmware that
has an e820 reserved entry that covered a big range (e0000000-fed003ff),
and that had various PCI resources in it set up by firmware.

With old kernels, the reserved range would force us to re-allocate all
pre-existing PCI resources, and his reserved range would end up looking
like this:

e0000000-fed003ff : reserved
  fec00000-fec00fff : IOAPIC 0
  fed00000-fed003ff : HPET 0

where only the pre-allocated special regions (IOAPIC and HPET) were kept
around.

With 2.6.28-rc2, which uses 'reserve_region_with_split()', Jonathan's
resource tree looked like this:

e0000000-fe7fffff : reserved
fe800000-fe8fffff : PCI Bus 0000:01
 fe800000-fe8fffff : reserved
fe900000-fe9d9aff : reserved
fe9d9b00-fe9d9bff : 0000:00:1f.3
 fe9d9b00-fe9d9bff : reserved
fe9d9c00-fe9d9fff : 0000:00:1a.7
 fe9d9c00-fe9d9fff : reserved
fe9da000-fe9dafff : 0000:00:03.3
 fe9da000-fe9dafff : reserved
fe9db000-fe9dbfff : 0000:00:19.0
 fe9db000-fe9dbfff : reserved
fe9dc000-fe9dffff : 0000:00:1b.0
 fe9dc000-fe9dffff : reserved
fe9e0000-fe9fffff : 0000:00:19.0
 fe9e0000-fe9fffff : reserved
fea00000-fea7ffff : 0000:00:02.0
 fea00000-fea7ffff : reserved
fea80000-feafffff : 0000:00:02.1
 fea80000-feafffff : reserved
feb00000-febfffff : 0000:00:02.0
 feb00000-febfffff : reserved
fec00000-fed003ff : reserved
 fec00000-fec00fff : IOAPIC 0
 fed00000-fed003ff : HPET 0

and because the reserved entry had been split and moved into the
individual resources, and because it used the IORESOURCE_BUSY flag, the
drivers that actually wanted to _use_ those resources couldn't actually
attach to them:

e1000e 0000:00:19.0: BAR 0: can't reserve mem region [0xfe9e0000-0xfe9fffff]
HDA Intel 0000:00:1b.0: BAR 0: can't reserve mem region [0xfe9dc000-0xfe9dffff]

with this patch, the resource tree instead becomes

e0000000-fed003ff : reserved
  fe800000-fe8fffff : PCI Bus 0000:01
  fe9d9b00-fe9d9bff : 0000:00:1f.3
  fe9d9c00-fe9d9fff : 0000:00:1a.7
    fe9d9c00-fe9d9fff : ehci_hcd
  fe9da000-fe9dafff : 0000:00:03.3
  fe9db000-fe9dbfff : 0000:00:19.0
    fe9db000-fe9dbfff : e1000e
  fe9dc000-fe9dffff : 0000:00:1b.0
    fe9dc000-fe9dffff : ICH HD audio
  fe9e0000-fe9fffff : 0000:00:19.0
    fe9e0000-fe9fffff : e1000e
  fea00000-fea7ffff : 0000:00:02.0
  fea80000-feafffff : 0000:00:02.1
  feb00000-febfffff : 0000:00:02.0
  fec00000-fec00fff : IOAPIC 0
  fed00000-fed003ff : HPET 0

ie the one reserved region now ends up surrounding all the PCI resources
that were allocated inside of it by firmware, and because it is not
marked BUSY, drivers have no problem attaching to the pre-allocated
resources.

Reported-and-tested-by: Jonathan Corbet <corbet@lwn.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoreserve_region_with_split: Fix GFP_KERNEL usage under spinlock
Linus Torvalds [Sat, 1 Nov 2008 16:53:58 +0000 (09:53 -0700)]
reserve_region_with_split: Fix GFP_KERNEL usage under spinlock

This one apparently doesn't generate any warnings, because the function
is only used during system bootup, when the warnings are disabled.  But
it's still very wrong.

The __reserve_region_with_split() function is called with the
resource_lock held for writing, so it must only ever do GFP_ATOMIC
allocations.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'link_removal' of git://www.jni.nu/cris
Linus Torvalds [Sat, 1 Nov 2008 16:52:43 +0000 (09:52 -0700)]
Merge branch 'link_removal' of git://jni.nu/cris

* 'link_removal' of git://www.jni.nu/cris:
  [CRIS] Remove links from CRIS build
  [CRIS] Merge asm-offsets.c for both arches into one file.

16 years agoMerge branch 'cris_move' of git://www.jni.nu/cris
Linus Torvalds [Sat, 1 Nov 2008 16:51:51 +0000 (09:51 -0700)]
Merge branch 'cris_move' of git://www.jni.nu/cris

* 'cris_move' of git://www.jni.nu/cris:
  [CRIS] Move header files from include to arch/cris/include.
  [CRISv32] Remove warning in io.h

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Sat, 1 Nov 2008 16:50:38 +0000 (09:50 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELinux: properly handle empty tty_files list

16 years agoremove unused #include <version.h>'s
Huang Weiyi [Fri, 31 Oct 2008 14:50:04 +0000 (22:50 +0800)]
remove unused #include <version.h>'s

The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/leds/leds-hp-disk.c
  drivers/misc/panasonic-laptop.c

This patch removes the said #include <version.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agosaner FASYNC handling on file close
Al Viro [Fri, 31 Oct 2008 23:28:30 +0000 (23:28 +0000)]
saner FASYNC handling on file close

As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofile caps: always start with clear bprm->caps_*
Serge Hallyn [Thu, 30 Oct 2008 16:52:23 +0000 (11:52 -0500)]
file caps: always start with clear bprm->caps_*

While Linux doesn't honor setuid on scripts.  However, it mistakenly
behaves differently for file capabilities.

This patch fixes that behavior by making sure that get_file_caps()
begins with empty bprm->caps_*.  That way when a script is loaded,
its bprm->caps_* may be filled when binfmt_misc calls prepare_binprm(),
but they will be cleared again when binfmt_elf calls prepare_binprm()
next to read the interpreter's file capabilities.

Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agokey: fix setkey(8) policy set breakage
Alexey Dobriyan [Fri, 31 Oct 2008 23:41:26 +0000 (16:41 -0700)]
key: fix setkey(8) policy set breakage

Steps to reproduce:

#/usr/sbin/setkey -f
flush;
spdflush;

add 192.168.0.42 192.168.0.1 ah 24500 -A hmac-md5 "1234567890123456";
add 192.168.0.42 192.168.0.1 esp 24501 -E 3des-cbc "123456789012123456789012";

spdadd 192.168.0.42 192.168.0.1 any -P out ipsec
esp/transport//require
ah/transport//require;

setkey: invalid keymsg length

Policy dump will bail out with the same message after that.

-recv(4, "\2\16\0\0\32\0\3\0\0\0\0\0\37\r\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208
+recv(4, "\2\16\0\0\36\0\3\0\0\0\0\0H\t\0\0\3\0\5\0\377 \0\0\2\0\0\0\300\250\0*\0"..., 32768, 0) = 208

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Fri, 31 Oct 2008 22:44:08 +0000 (15:44 -0700)]
Merge branch 'for-2.6.28' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux:
  NLM: Set address family before calling nlm_host_rebooted()
  nfsd: fix failure to set eof in readdir in some situations

16 years agoSELinux: properly handle empty tty_files list
Eric Paris [Fri, 31 Oct 2008 21:40:00 +0000 (17:40 -0400)]
SELinux: properly handle empty tty_files list

SELinux has wrongly (since 2004) had an incorrect test for an empty
tty->tty_files list.  With an empty list selinux would be pointing to part
of the tty struct itself and would then proceed to dereference that value
and again dereference that result.  An F10 change to plymouth on a ppc64
system is actually currently triggering this bug.  This patch uses
list_empty() to handle empty lists rather than looking at a meaningless
location.

[note, this fixes the oops reported in
https://bugzilla.redhat.com/show_bug.cgi?id=469079]

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>