GitHub/mt8127/android_kernel_alcatel_ttab.git
16 years agocciss: section mismatch
Randy Dunlap [Mon, 14 Jan 2008 08:55:17 +0000 (00:55 -0800)]
cciss: section mismatch

Mark cciss_pci_init() as __devinit, to fix section mismatch warning.

WARNING: vmlinux.o(.text+0x601fc9): Section mismatch: reference to .init.text: (between 'cciss_pci_init' and 'cciss_getgeometry')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <mike.miller@hp.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoscsi/qla2xxx/qla_os.c section fix
Adrian Bunk [Mon, 14 Jan 2008 08:55:16 +0000 (00:55 -0800)]
scsi/qla2xxx/qla_os.c section fix

WARNING: vmlinux.o(.text+0x2a4462): Section mismatch: reference to .exit.text:qla2x00_remove_one (between 'qla2xxx_pci_error_detected' and 'qla2x00_stop_timer')

qla2x00_remove_one() mustn't be __devexit since it's called from
qla2xxx_pci_error_detected().

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Seokmann Ju <seokmann.ju@qlogic.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomacintosh: fix fabrication of caplock key events
Andy Wingo [Mon, 14 Jan 2008 08:55:15 +0000 (00:55 -0800)]
macintosh: fix fabrication of caplock key events

If the user has turned on the "restore_caplock_events" parameter, the
code mangles the capslock events correctly, then erroneously ignores
those events.  Fix logic to allow correct fallthrough.

Signed-off-by: Andy Wingo <wingo@pobox.com>
Acked-by: Andrew McNabb <amcnabb@mcnabbs.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoquicklists: Only consider memory that can be used with GFP_KERNEL
Christoph Lameter [Mon, 14 Jan 2008 08:55:14 +0000 (00:55 -0800)]
quicklists: Only consider memory that can be used with GFP_KERNEL

Quicklists calculates the size of the quicklists based on the number of
free pages.  This must be the number of free pages that can be allocated
with GFP_KERNEL.  node_page_state() includes the pages in ZONE_HIGHMEM and
ZONE_MOVABLE which may lead the quicklists to become too large causing OOM.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMAINTAINERS: email update and add missing entry
Nicolas Ferre [Mon, 14 Jan 2008 08:55:13 +0000 (00:55 -0800)]
MAINTAINERS: email update and add missing entry

 - MAINTAINERS email update
 - add atmel_lcdfb entry

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoTPM: fix suspend and resume failure
David Smith [Mon, 14 Jan 2008 08:55:12 +0000 (00:55 -0800)]
TPM: fix suspend and resume failure

The savestate command structure was being overwritten by the result of
running the TPM_SaveState command after one run, so make it a local
variable to the function instead of a global variable that gets
overwritten.

Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Kent Yoder <shpedoikal@gmail.com>
Cc: Marcel Selhorst <tpm@selhorst.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoKick CPUS that might be sleeping in cpus_idle_wait
Steven Rostedt [Mon, 14 Jan 2008 08:55:10 +0000 (00:55 -0800)]
Kick CPUS that might be sleeping in cpus_idle_wait

Sometimes cpu_idle_wait gets stuck because it might miss CPUS that are
already in idle, have no tasks waiting to run and have no interrupts going
to them.  This is common on bootup when switching cpu idle governors.

This patch gives those CPUS that don't check in an IPI kick.

 Background:
 -----------
I notice this while developing the mcount patches, that every once in a
while the system would hang. Looking deeper, the hang was always at boot
up when registering init_menu of the cpu_idle menu governor. Talking
with Thomas Gliexner, we discovered that one of the CPUS had no timer
events scheduled for it and it was in idle (running with NO_HZ). So the
CPU would not set the cpu_idle_state bit.

Hitting sysrq-t a few times would eventually route the interrupt to the
stuck CPU and the system would continue.

Note, I would have used the PDA isidle but that is set after the
cpu_idle_state bit is cleared, and would leave a window open where we
may miss being kicked.

hmm, looking closer at this, we still have a small race window between
clearing the cpu_idle_state and disabling interrupts (hence the RFC).

    CPU0:                          CPU 1:
  ---------                       ---------
 cpu_idle_wait():                 cpu_idle():
      |                           __cpu_cpu_var(is_idle) = 1;
      |                           if (__get_cpu_var(cpu_idle_state)) /* == 0 */
 per_cpu(cpu_idle_state, 1) = 1;         |
 if (per_cpu(is_idle, 1)) /* == 1 */     |
 smp_call_function(1)                    |
      |                             receives ipi and runs do_nothing.
 wait on map == empty               idle();
   /* waits forever */

So really we need interrupts off for most of this then. One might think
that we could simply clear the cpu_idle_state from do_nothing, but I'm
assuming that cpu_idle governors can be removed, and this might cause a
race that a governor might be used after the module was removed.

Venki said:

  I think your RFC patch is the right solution here.  As I see it, there is
  no race with your RFC patch.  As long as you call a dummy smp_call_function
  on all CPUs, we should be OK.  We can get rid of cpu_idle_state and the
  current wait forever logic altogether with dummy smp_call_function.  And so
  there wont be any wait forever scenario.

  The whole point of cpu_idle_wait() is to make all CPUs come out of idle
  loop atleast once.  The caller will use cpu_idle_wait something like this.

  // Want to change idle handler

  - Switch global idle handler to always present default_idle

  - call cpu_idle_wait so that all cpus come out of idle for an instant
    and stop using old idle pointer and start using default idle

  - Change the idle handler to a new handler

  - optional cpu_idle_wait if you want all cpus to start using the new
    handler immediately.

Maybe the below 1s patch is safe bet for .24.  But for .25, I would say we
just replace all complicated logic by simple dummy smp_call_function and
remove cpu_idle_state altogether.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agow1: decrement slave counter only in ->release() callback
Evgeniy Polyakov [Mon, 14 Jan 2008 08:55:08 +0000 (00:55 -0800)]
w1: decrement slave counter only in ->release() callback

Decrement the slave counter only in ->release() callback instead of both
in ->release() and w1 control.

Patch is based on debug work and preliminary patch made by Henri Laakso.
Henri noticed in debug that this counter becomes negative after w1 slave
device is physically removed.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Henri Laakso <henri.laakso@wapice.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agomodules: de-mutex more symbol lookup paths in the module code
Rusty Russell [Mon, 14 Jan 2008 08:55:03 +0000 (00:55 -0800)]
modules: de-mutex more symbol lookup paths in the module code

Kyle McMartin reports sysrq_timer_list_show() can hit the module mutex
from hard interrupt context.  These paths don't need to though, since we
long ago changed all the module list manipulation to occur via
stop_machine().

Disabling preemption is enough.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sun, 13 Jan 2008 18:03:10 +0000 (10:03 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] vfp: fix fuitod/fsitod instructions
  [ARM] pxa: silence warnings from cpu_is_xxx() macros

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Sun, 13 Jan 2008 18:02:26 +0000 (10:02 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  spidernet MAINTAINERship update
  sky2: remove check for PCI wakeup setting from BIOS
  sky2: large memory workaround.
  fs_enet: check for phydev existence in the ethtool handlers
  [usb netdev] asix: fix regression
  r8169: fix missing loop variable increment
  ip1000: menu location change
  Fixed a small typo in the loopback driver
  3c509: PnP resource management fix
  netxen: fix byte-swapping in tx and rx
  netxen: optimize tx handling
  netxen: stop second phy correctly
  netxen: update driver version
  netxen: update MAINTAINERS
  endianness noise in tulip_core
  de4x5 fixes
  xircom_cb endianness fixes
  rt2x00: Put 802.11 data on 4 byte boundary
  rt2x00: Corectly initialize rt2500usb MAC
  rt2x00: Allow rt61 to catch up after a missing tx report

16 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Sun, 13 Jan 2008 18:01:45 +0000 (10:01 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix CPU hotplug when using the SLB shadow buffer
  [POWERPC] efika: add phy-handle property for fec_mpc52xx

16 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sun, 13 Jan 2008 17:58:22 +0000 (09:58 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  pnpacpi: print resource shortage message only once
  PM: ACPI and APM must not be enabled at the same time
  ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9
  ACPICA: fix acpi_serialize hang regression
  ACPI : Not register gsi for PCI IDE controller in legacy mode
  ACPI: Reintroduce run time configurable max_cstate for !CPU_IDLE case
  ACPI: Make sysfs interface in ACPI power optional.
  ACPI: EC: Enable boot EC before bus_scan
  increase PNP_MAX_PORT to 40 from 24

16 years agoknfsd: Allow NFSv2/3 WRITE calls to succeed when krb5i etc is used.
NeilBrown [Fri, 11 Jan 2008 22:06:52 +0000 (17:06 -0500)]
knfsd: Allow NFSv2/3 WRITE calls to succeed when krb5i etc is used.

When RPCSEC/GSS and krb5i is used, requests are padded, typically to a multiple
of 8 bytes.  This can make the request look slightly longer than it
really is.

As of

f34b95689d2ce001c "The NFSv2/NFSv3 server does not handle zero
length WRITE request correctly",

the xdr decode routines for NFSv2 and NFSv3 reject requests that aren't
the right length, so krb5i (for example) WRITE requests can get lost.

This patch relaxes the appropriate test and enhances the related comment.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoremove task_ppid_nr_ns
Roland McGrath [Thu, 10 Jan 2008 20:52:04 +0000 (12:52 -0800)]
remove task_ppid_nr_ns

task_ppid_nr_ns is called in three places.  One of these should never
have called it.  In the other two, using it broke the existing
semantics.  This was presumably accidental.  If the function had not
been there, it would have been much more obvious to the eye that those
patches were changing the behavior.  We don't need this function.

In task_state, the pid of the ptracer is not the ppid of the ptracer.

In do_task_stat, ppid is the tgid of the real_parent, not its pid.
I also moved the call outside of lock_task_sighand, since it doesn't
need it.

In sys_getppid, ppid is the tgid of the real_parent, not its pid.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoPull bugzilla-9535 into release branch
Len Brown [Sat, 12 Jan 2008 23:06:27 +0000 (18:06 -0500)]
Pull bugzilla-9535 into release branch

16 years agopnpacpi: print resource shortage message only once
Len Brown [Sat, 12 Jan 2008 22:56:36 +0000 (17:56 -0500)]
pnpacpi: print resource shortage message only once

pnpacpi: exceeded the max number of IO resources: 40

While this message is a real error and should thus
remain KERN_ERR (even a new dmesg line is seen as a regression
by some, since it was not printed in 2.6.23...) it is certainly
impolite to print this warning 50 times should you happen to
have the oddball system with 90 io resources under a device...

So print the warning just once.

In 2.6.25 we'll get rid of the limits altogether
and these warnings will vanish with them.

http://bugzilla.kernel.org/show_bug.cgi?id=9535

Signed-off-by: Len Brown <len.brown@intel.com>
16 years agospidernet MAINTAINERship update
Jens Osterkamp [Fri, 11 Jan 2008 12:44:35 +0000 (13:44 +0100)]
spidernet MAINTAINERship update

Acked-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agosky2: remove check for PCI wakeup setting from BIOS
Stephen Hemminger [Fri, 11 Jan 2008 00:14:13 +0000 (16:14 -0800)]
sky2: remove check for PCI wakeup setting from BIOS

The driver checks status of PCI power management to mark
default setting of Wake On Lan. On some systems this works, but often
it reports a that WOL is disabled when it isn't.

This patch gets rid of that check and just reports the wake on
lan status based on the hardware capablity.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agosky2: large memory workaround.
Stephen Hemminger [Fri, 11 Jan 2008 00:14:12 +0000 (16:14 -0800)]
sky2: large memory workaround.

This patch might fix problems with 4G or more of memory.
It stops the driver from doing a small optimization for Tx and Rx,
and instead always sets the high-page on tx/rx descriptors.

Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9725

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoUse access mode instead of open flags to determine needed permissions
Linus Torvalds [Sat, 12 Jan 2008 22:06:34 +0000 (14:06 -0800)]
Use access mode instead of open flags to determine needed permissions

Way back when (in commit 834f2a4a1554dc5b2598038b3fe8703defcbe467, aka
"VFS: Allow the filesystem to return a full file pointer on open intent"
to be exact), Trond changed the open logic to keep track of the original
flags to a file open, in order to pass down the the intent of a dentry
lookup to the low-level filesystem.

However, when doing that reorganization, it changed the meaning of
namei_flags, and thus inadvertently changed the test of access mode for
directories (and RO filesystem) to use the wrong flag.  So fix those
test back to use access mode ("acc_mode") rather than the open flag
("flag").

Issue noticed by Bill Roman at Datalight.

Reported-and-tested-by: Bill Roman <bill.roman@datalight.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agofs_enet: check for phydev existence in the ethtool handlers
Anton Vorontsov [Tue, 8 Jan 2008 19:05:55 +0000 (22:05 +0300)]
fs_enet: check for phydev existence in the ethtool handlers

Otherwise oops will happen if ethernet device has not been opened:

Unable to handle kernel paging request for data at address 0x0000014c
Faulting instruction address: 0xc016f7f0
Oops: Kernel access of bad area, sig: 11 [#1]
MPC85xx
NIP: c016f7f0 LR: c01722a0 CTR: 00000000
REGS: c79ddc70 TRAP: 0300   Not tainted  (2.6.24-rc3-g820a386b)
MSR: 00029000 <EE,ME>  CR: 20004428  XER: 20000000
DEAR: 0000014c, ESR: 00000000
TASK = c789f5e0[999] 'snmpd' THREAD: c79dc000
GPR00: c01aceb8 c79ddd20 c789f5e0 00000000 c79ddd3c 00000000 c79ddd64 00000000
GPR08: 00000000 c7845b60 c79dde3c c01ace80 20004422 200249fc 000002a0 100da728
GPR16: 100c0000 00000000 00000000 00000000 20022078 00000009 200220e0 bfc85558
GPR24: c79ddd3c 00000000 00000000 c02e0e70 c022fc64 ffffffff c7845800 bfc85498
NIP [c016f7f0] phy_ethtool_gset+0x0/0x4c
LR [c01722a0] fs_get_settings+0x18/0x28
Call Trace:
[c79ddd20] [c79dde38] 0xc79dde38 (unreliable)
[c79ddd30] [c01aceb8] dev_ethtool+0x294/0x11ec
[c79dde30] [c01aaa44] dev_ioctl+0x454/0x6a8
[c79ddeb0] [c019b9d4] sock_ioctl+0x84/0x230
[c79dded0] [c007ded8] do_ioctl+0x34/0x8c
[c79ddee0] [c007dfbc] vfs_ioctl+0x8c/0x41c
[c79ddf10] [c007e38c] sys_ioctl+0x40/0x74
[c79ddf40] [c000d4c0] ret_from_syscall+0x0/0x3c
Instruction dump:
81630000 800b0030 2f800000 419e0010 7c0803a6 4e800021 7c691b78 80010014
7d234b78 38210010 7c0803a6 4e800020 <8003014c7c6b1b78 38600000 90040004

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoMerge branch 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linvill...
Jeff Garzik [Sat, 12 Jan 2008 22:44:35 +0000 (17:44 -0500)]
Merge branch 'fixes-jgarzik' of git://git./linux/kernel/git/linville/wireless-2.6 into upstream-fixes

16 years ago[usb netdev] asix: fix regression
Russ Dill [Thu, 10 Jan 2008 04:32:07 +0000 (21:32 -0700)]
[usb netdev] asix: fix regression

51bf2976b55d07f9daae9697a0a3ac9f58abcedc caused a regression in the asix
usbnet driver. usb_control_msg returns the number of bytes read on
success, not 0. Tested with NETGEAR FA120.

Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agor8169: fix missing loop variable increment
Francois Romieu [Thu, 3 Jan 2008 22:38:38 +0000 (23:38 +0100)]
r8169: fix missing loop variable increment

Spotted-by: Citizen Lee <citizen_lee@thecus.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoip1000: menu location change
Stephen Hemminger [Tue, 1 Jan 2008 17:27:58 +0000 (09:27 -0800)]
ip1000: menu location change

Move the ip1000 driver into the expected place for gigabit cards
in the configuration menu structure. It should be under the gigabit
cards, not at the top level.

Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoFixed a small typo in the loopback driver
Emil Medve [Thu, 27 Dec 2007 14:17:22 +0000 (08:17 -0600)]
Fixed a small typo in the loopback driver

This is probably a result of the changes from commit
854d836 - [NET]: Dynamically allocate the loopback device, part 2

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years ago3c509: PnP resource management fix
Krzysztof Helt [Thu, 27 Dec 2007 08:54:04 +0000 (09:54 +0100)]
3c509: PnP resource management fix

In order to release PnP resources a card type must be set to EL3_PNP.
Previously, it was never set hence the PnP resources were not
released and device was left in incorrect state.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agonetxen: fix byte-swapping in tx and rx
Dhananjay Phadke [Mon, 31 Dec 2007 18:08:57 +0000 (10:08 -0800)]
netxen: fix byte-swapping in tx and rx

Here's the reworked patch.

This cleans up some unnecessary byte-swapping while setting up tx and
interpreting rx desc. The 64 bit rx status data should be converted
to host endian format only once and the macros just need to extract
bitfields.

This saves a spate of interrupts on pseries blades caused by buggy
(non) processing rx status ring.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agonetxen: optimize tx handling
dhananjay@netxen.com [Wed, 26 Dec 2007 18:23:58 +0000 (10:23 -0800)]
netxen: optimize tx handling

netxen driver allows limited number of threads simultaneously posting
skb's in tx ring. If transmit slot is unavailable, driver calls
schedule() or loops in xmit_frame().

This patch returns TX_BUSY and lets the stack reschedule the packet if
transmit slot is unavailable. Also removes unnecessary check for tx
timeout in the driver itself, the network stack does that anyway.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agonetxen: stop second phy correctly
dhananjay@netxen.com [Wed, 26 Dec 2007 18:23:56 +0000 (10:23 -0800)]
netxen: stop second phy correctly

This patch fixes bug that doesn't quiesce second port when interface is
brought down, which could lead to unwarranted interrupt during rmmod /
ifdown.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agonetxen: update driver version
dhananjay@netxen.com [Wed, 26 Dec 2007 18:23:54 +0000 (10:23 -0800)]
netxen: update driver version

Bumping up driver version to 3.4.18, several fixes have gone in since
version 3.4.2.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agonetxen: update MAINTAINERS
dhananjay@netxen.com [Wed, 26 Dec 2007 18:23:53 +0000 (10:23 -0800)]
netxen: update MAINTAINERS

Changing MAINTAINERS for netxen nic driver.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoendianness noise in tulip_core
Al Viro [Sun, 23 Dec 2007 20:01:04 +0000 (20:01 +0000)]
endianness noise in tulip_core

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agode4x5 fixes
Al Viro [Sun, 23 Dec 2007 20:01:04 +0000 (20:01 +0000)]
de4x5 fixes

* (trivial) endianness annotations
* don't bother with del_timer() from the inside of timer handler itself
* disable_ast() really ought to do del_timer_sync(), not del_timer()
* clean the timer handling in general.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoxircom_cb endianness fixes
Al Viro [Sun, 23 Dec 2007 20:01:04 +0000 (20:01 +0000)]
xircom_cb endianness fixes

* descriptors inside the rx and tx rings are l-e
* don't cpu_to_le32() the argument of outl()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Fri, 11 Jan 2008 21:46:46 +0000 (13:46 -0800)]
Merge git://git./linux/kernel/git/mchehab/v4l-dvb

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (7001): av7110: fix section mismatch
  V4L/DVB (6999): ivtv: stick to udelay=10 after all

16 years agoMerge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6
Linus Torvalds [Fri, 11 Jan 2008 19:49:31 +0000 (11:49 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] fix unaligned access in readdir

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24
Linus Torvalds [Fri, 11 Jan 2008 19:48:59 +0000 (11:48 -0800)]
Merge git://git./linux/kernel/git/lethal/sh-2.6.24

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.24:
  sh: Force __access_ok() to obey address space limit.
  sh: Fix argument page dcache flushing regression.

16 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Fri, 11 Jan 2008 19:48:00 +0000 (11:48 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Replace 40c7869b693b18412491fdcff64682215b739f9e kludge
  [MIPS] Lasat: Fix built in separate object directory.
  [MIPS] Malta: Fix software reset on big endian
  [MIPS] pnx8xxx: move to clocksource
  [MIPS] Wrong CONFIG option prevents setup of DMA zone.

16 years agops3fb: fix deadlock on kexec()
Jeremy Kerr [Fri, 11 Jan 2008 13:28:04 +0000 (14:28 +0100)]
ps3fb: fix deadlock on kexec()

Since the introduction of the acquire_console_sem calls in
0333d83509c7d8496c8965b5ba9bc0c98e83c259, kexecing can cause the
kernel to deadlock:

 ps3fb_shutdown()
  -> unregister_framebuffer()
  -> fb_notifier_call_chain(FB_EVENT_FB_UNBIND)
  -> fbcon_fb_unbind()
  -> unbind_con_driver()
  -> bind_con_driver()
[ acquires console_sem ]
  -> fbcon_deinit()
  -> fbops->fb_release(newinfo, 0)
  -> ps3fb_release()
  -> ps3fb_sync()
[ acquires console_sem ]

This change avoids the deadlock by moving the acquire_console_sem()
out of ps3fb_sync(), and puts it into the two other callsites, leaving
ps3fb_release() to call ps3fb_sync() without the console semaphore.

[Geert]
  - Corrected call sequence above
  - ps3fb_release() may be called with and without console_sem held. This is an
    inconsistency that should be fixed at the fb level, but for now, try to
    acquire console_sem in ps3fb_release().

    I think it's safer to let ps3fb_release() try to acquire console_sem and
    not refresh the screen if it fails, than to call ps3fb_sync() without
    holding console_sem, as ps3fb_par may be modified at the same time, causing
    crashes or lockups.

    Besides, ps3fb_release() only calls ps3fb_sync() to refresh the screen
    when display flipping is disabled, which is an uncommon case (except during
    shutdown/kexec).

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agops3fb: prevent use after free of fb_info
Jeremy Kerr [Fri, 11 Jan 2008 13:27:10 +0000 (14:27 +0100)]
ps3fb: prevent use after free of fb_info

In ps3fb_shutdown, freeing the framebuffer will cause fb_info (in
dev->core.driver_data) to be free()ed, which we potentially access
from the ps3fbd kthread.

This change frees the framebuffer after stopping the ps3fbd kthread.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 11 Jan 2008 19:44:59 +0000 (11:44 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  blktrace: kill the unneeded initcall
  block: fix blktrace timestamps
  loop: fix bad bio_alloc() nr_iovec request
  Don't blatt first element of prv in sg_chain()

16 years agocache invalidation error for buffered write
Massimo Cirillo [Fri, 11 Jan 2008 10:24:11 +0000 (10:24 +0000)]
cache invalidation error for buffered write

The bug causes corruptions of data read from flash.

The original code performs cache invalidation from "adr" to "adr + len"
in do_write_buffer().  Since len and adr could be updated in the code
before invalidation - it causes improper setting of cache invalidation
regions.

Signed-off-by: Massimo Cirillo <maxcir@gmail.com>
Signed-off-by: Giuseppe D'Eliseo <giuseppedeliseo@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woohouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoIDE: terminate ACPI DMI list
Jeff Garzik [Fri, 11 Jan 2008 04:59:18 +0000 (23:59 -0500)]
IDE: terminate ACPI DMI list

Fix oops reported by Trond.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoPull bugzilla-9683 into release branch
Len Brown [Fri, 11 Jan 2008 17:28:38 +0000 (12:28 -0500)]
Pull bugzilla-9683 into release branch

16 years agoPull bugzilla-9627 into release branch
Len Brown [Fri, 11 Jan 2008 17:28:22 +0000 (12:28 -0500)]
Pull bugzilla-9627 into release branch

16 years agoPull bugzilla-9535 into release branch
Len Brown [Fri, 11 Jan 2008 17:27:50 +0000 (12:27 -0500)]
Pull bugzilla-9535 into release branch

16 years agoPull bugzilla-9494 into release branch
Len Brown [Fri, 11 Jan 2008 17:27:32 +0000 (12:27 -0500)]
Pull bugzilla-9494 into release branch

16 years agoPull bugzilla-9194 into release branch
Len Brown [Fri, 11 Jan 2008 17:27:13 +0000 (12:27 -0500)]
Pull bugzilla-9194 into release branch

16 years agoPM: ACPI and APM must not be enabled at the same time
Len Brown [Thu, 13 Dec 2007 22:38:03 +0000 (17:38 -0500)]
PM: ACPI and APM must not be enabled at the same time

ACPI and APM used "pm_active" to guarantee that
they would not be simultaneously active.

But pm_active was recently moved under CONFIG_PM_LEGACY,
so that without CONFIG_PM_LEGACY, pm_active became a NOP --
allowing ACPI and APM to both be simultaneously enabled.
This caused unpredictable results, including boot hangs.

Further, the code under CONFIG_PM_LEGACY is scheduled
for removal.

So replace pm_active with pm_flags.
pm_flags depends only on CONFIG_PM,
which is present for both CONFIG_APM and CONFIG_ACPI.

http://bugzilla.kernel.org/show_bug.cgi?id=9194

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
16 years agoPull bugzilla-8973 into release branch
Len Brown [Fri, 11 Jan 2008 17:23:14 +0000 (12:23 -0500)]
Pull bugzilla-8973 into release branch

16 years agoPull bugzilla-8171 into release branch
Len Brown [Fri, 11 Jan 2008 17:22:57 +0000 (12:22 -0500)]
Pull bugzilla-8171 into release branch

16 years agoPull bugzilla-5637 into release branch
Len Brown [Fri, 11 Jan 2008 17:20:18 +0000 (12:20 -0500)]
Pull bugzilla-5637 into release branch

16 years ago[MIPS] Replace 40c7869b693b18412491fdcff64682215b739f9e kludge
Atsushi Nemoto [Mon, 7 Jan 2008 15:41:13 +0000 (00:41 +0900)]
[MIPS] Replace 40c7869b693b18412491fdcff64682215b739f9e kludge

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] Lasat: Fix built in separate object directory.
WANG Cong [Wed, 2 Jan 2008 06:21:36 +0000 (14:21 +0800)]
[MIPS] Lasat: Fix built in separate object directory.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
[Ralf: The LDSCRIPT script needed fixing, too]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] Malta: Fix software reset on big endian
Dmitri Vorobiev [Tue, 8 Jan 2008 03:44:00 +0000 (06:44 +0300)]
[MIPS] Malta: Fix software reset on big endian

I noticed that the commit f197465384bf7ef1af184c2ed1a4e268911a91e3
(MIPS Tech: Get rid of volatile in core code) broke the software
reset functionality for MIPS Malta boards in big-endian mode.

According to the MIPS Malta board user's manual, writing the magic
32-bit GORESET value into the SOFTRES register initiates board soft
reset. My experimentation has shown that the endianness of the GORESET
integer should thereby be the same as the endianness, which has been
set for the CPU itself. The writew() function used to write the magic
value in the code introduced by the commit mentioned above, however,
swaps bytes for big-endian kernels and transfers 16 bits instead of 32.

The patch below replaces the writew() function by the __raw_writel()
routine, which leaves the byte order intact and transfers the whole
MIPS machine word. Trivial code cleanup (replacing spaces by a tab
and cutting oversized lines to make checkpatch.pl happy) is also
included.

The patch was tested using a Malta evaluation board running in both
BE and LE modes. For both modes, software reset was fully functional
after the change.

P.S. I suspect that the same commit broke the "standby" functionality
for MIPS Atlas boards. However, I did not touch the Atlas code as I
don't have such board at my disposal and also because the linux-mips.org
Web site claims that Atlas support is scheduled for removal.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] pnx8xxx: move to clocksource
Vitaly Wool [Thu, 10 Jan 2008 14:10:05 +0000 (17:10 +0300)]
[MIPS] pnx8xxx: move to clocksource

This patch converts PNX8XXX system timer to clocksource restoring PNX8550
support back to live.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years ago[MIPS] Wrong CONFIG option prevents setup of DMA zone.
Thomas Bogendoerfer [Sun, 30 Dec 2007 11:45:40 +0000 (12:45 +0100)]
[MIPS] Wrong CONFIG option prevents setup of DMA zone.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
16 years agoV4L/DVB (7001): av7110: fix section mismatch
Randy Dunlap [Thu, 10 Jan 2008 22:31:47 +0000 (19:31 -0300)]
V4L/DVB (7001): av7110: fix section mismatch

Fix driver data name to match whitelist of acceptable names that contain
pointers init data so that section mismatch warning is placated.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoV4L/DVB (6999): ivtv: stick to udelay=10 after all
Hans Verkuil [Thu, 10 Jan 2008 21:33:16 +0000 (18:33 -0300)]
V4L/DVB (6999): ivtv: stick to udelay=10 after all

Using an udelay of 5 seems to result in problems for several people.
For now abandon the udelay value of 5 and stick to 10, even though this
will mean a longer load time of the cx2584x firmware.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
16 years agoblktrace: kill the unneeded initcall
Jens Axboe [Fri, 11 Jan 2008 12:37:01 +0000 (13:37 +0100)]
blktrace: kill the unneeded initcall

It just inits the mutex, we can do that with DEFINE_MUTEX() instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
16 years agoblock: fix blktrace timestamps
Ingo Molnar [Fri, 11 Jan 2008 12:35:54 +0000 (13:35 +0100)]
block: fix blktrace timestamps

David Dillow reported broken blktrace timestamps. The reason
is cpu_clock() which is not a global time source.

Fix bkltrace timestamps by using ktime_get() like the networking
code does for packet timestamps. This also removes a whole lot
of complexity from bkltrace.c and shrinks the code by 500 bytes:

   text    data     bss     dec     hex filename
   2888     124      44    3056     bf0 blktrace.o.before
   2390     116      44    2550     9f6 blktrace.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
16 years agoloop: fix bad bio_alloc() nr_iovec request
Jens Axboe [Fri, 11 Jan 2008 09:14:40 +0000 (10:14 +0100)]
loop: fix bad bio_alloc() nr_iovec request

Don't allocate room for an iovec when it is not needed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
16 years agoDon't blatt first element of prv in sg_chain()
Rusty Russell [Fri, 11 Jan 2008 09:12:55 +0000 (10:12 +0100)]
Don't blatt first element of prv in sg_chain()

I realize that sg chaining is a ploy to make the rest of the kernel
devs feel the pain of the SCSI subsystem.  But this was a little
unsubtle.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
16 years ago[XFS] fix unaligned access in readdir
Christoph Hellwig [Thu, 10 Jan 2008 05:43:26 +0000 (16:43 +1100)]
[XFS] fix unaligned access in readdir

This patch should fix the issue seen on Alpha with unaligned accesses in
the new readdir code. By aligning each dirent to sizeof(u64) we'll avoid
unaligned accesses. To make doubly sure we're not hitting problems also
rearrange struct hack_dirent to avoid holes.

SGI-PV: 975411
SGI-Modid: xfs-linux-melb:xfs-kern:30302a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
16 years ago[POWERPC] Fix CPU hotplug when using the SLB shadow buffer
Michael Neuling [Fri, 11 Jan 2008 03:02:47 +0000 (14:02 +1100)]
[POWERPC] Fix CPU hotplug when using the SLB shadow buffer

Before we register the SLB shadow buffer, we need to invalidate the
entries in the buffer, otherwise we can end up stale entries from when
we previously offlined the CPU.

This does this invalidate as well as unregistering the buffer with
PHYP before we offline the cpu.  Tested and fixes crashes seen on
970MP (thanks to tonyb) and POWER5.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
16 years agoACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9
Zhao Yakui [Fri, 11 Jan 2008 05:24:55 +0000 (00:24 -0500)]
ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9

It is important that these resources be reserved
to avoid conflicts with well known ACPI registers.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
16 years agosh: Force __access_ok() to obey address space limit.
Paul Mundt [Fri, 11 Jan 2008 04:18:16 +0000 (13:18 +0900)]
sh: Force __access_ok() to obey address space limit.

When the thread_info->addr_limit changes were introduced, __access_ok()
was missed in the conversion, allowing user processes to perform P1/P2
accesses under certain conditions.

This has already been corrected with the nommu refactoring in later
kernels.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
16 years agoACPICA: fix acpi_serialize hang regression
Bob Moore [Fri, 11 Jan 2008 04:04:10 +0000 (23:04 -0500)]
ACPICA: fix acpi_serialize hang regression

http://bugzilla.kernel.org/show_bug.cgi?id=8171

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
16 years agoACPI : Not register gsi for PCI IDE controller in legacy mode
Alan Cox [Fri, 11 Jan 2008 03:49:58 +0000 (22:49 -0500)]
ACPI : Not register gsi for PCI IDE controller in legacy mode

When PCI IDE controller works in legacy mode and no PRT entry is found
in ACPI PRT table, OSPM will neither read the irq number from the IDE
PCI configuration space nor call the function of acpi_register_gsi to
register gsi.

http://bugzilla.kernel.org/show_bug.cgi?id=5637

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Fri, 11 Jan 2008 00:09:34 +0000 (16:09 -0800)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] padlock: Fix alignment fault in aes_crypt_copy

16 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Thu, 10 Jan 2008 22:53:37 +0000 (14:53 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata and starting/stopping ATAPI floppy devices
  sata_sil24: prevent hba lockup when pass-through ATA commands are used
  Update kernel parameter document for libata DMA mode setting knobs.
  libata: don't normalize UNKNOWN to NONE after reset
  libata-pmp: propagate timeout to host link
  libata-pmp: 4726 hates SRST
  pata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversion
  pata_pdc202xx_old: Further fixups
  libata-sff: PCI IRQ handling fix
  sata_qstor: use hardreset instead of softreset

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Thu, 10 Jan 2008 22:31:16 +0000 (14:31 -0800)]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  trm290: do hook dma_host_{on,off} methods (take 2)
  ide: fix cable detection for SATA bridges
  ide: workaround suspend bug for ACPI IDE

16 years agolibata and starting/stopping ATAPI floppy devices
Ondrej Zary [Thu, 10 Jan 2008 22:13:19 +0000 (17:13 -0500)]
libata and starting/stopping ATAPI floppy devices

Prevent libata from starting/stopping non-ATA devices (like ATAPI floppy
drives) as they don't seem to like it:

sd 1:0:1:0: [sdb] Starting disk
ata2.01: configured for PIO2
sd 1:0:1:0: [sdb] Result: hostbyte=0x00 driverbyte=0x08
sd 1:0:1:0: [sdb] Sense Key : 0x2 [current]
sd 1:0:1:0: [sdb] ASC=0x3a ASCQ=0x0

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
16 years agotrm290: do hook dma_host_{on,off} methods (take 2)
Sergei Shtylyov [Thu, 10 Jan 2008 22:03:42 +0000 (23:03 +0100)]
trm290: do hook dma_host_{on,off} methods (take 2)

Using default methods caused the chip's DMA PRD count registers, inadvertently
starting DMA!  While fixing it, also do:

- get rid of the 'ide_' prefixes in several functions for which the prefix in
  the method's name has been 'ide_' ectomized already;

- align the code hooking the IDE DMA methods in init_hwif_trm290()...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: fix cable detection for SATA bridges
George Kibardin [Thu, 10 Jan 2008 22:03:42 +0000 (23:03 +0100)]
ide: fix cable detection for SATA bridges

Signed-off-by: George Kibardin <george-kibardin@yandex.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agoide: workaround suspend bug for ACPI IDE
Shaohua Li [Thu, 10 Jan 2008 22:03:42 +0000 (23:03 +0100)]
ide: workaround suspend bug for ACPI IDE

http://bugzilla.kernel.org/show_bug.cgi?id=9673

ACPI _PS3 cause S4 breaks in the second attempt. The system has a _PS3
method for IDE, which will call into SMM mode. Currently we haven't clue
why just the second attempt fails, as it's totally in BIOS code, so
blacklist the system so far for 2.6.24.

A possible suspect is ACPI NVS isn't save/restore, we will revisit the
bug after linux does ACPI NVS save/restore.

Bart:
- fix scripts/checkpatch.pl complaints
- const-ify ide_acpi_dmi_table[]

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Reported-by: Mikko Vinni <mmvinni@yahoo.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
16 years agosata_sil24: prevent hba lockup when pass-through ATA commands are used
Gwendal Grignou [Thu, 10 Jan 2008 06:47:56 +0000 (15:47 +0900)]
sata_sil24: prevent hba lockup when pass-through ATA commands are used

Fix commands timeout with Sil3124/3132 based HBA when pass-through ATA
commands [where ATA_QCFLAG_RESULT_TF is set] are used while other
commands are active on other devices connected to the same port with a
Port Multiplier.  Due to a hardware bug, these commands must be sent
alone, like ATAPI commands.

Signed-off-by: Gwendal Grignou <gwendal@google.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoUpdate kernel parameter document for libata DMA mode setting knobs.
FD Cami [Sun, 6 Jan 2008 18:08:56 +0000 (19:08 +0100)]
Update kernel parameter document for libata DMA mode setting knobs.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: don't normalize UNKNOWN to NONE after reset
Tejun Heo [Tue, 8 Jan 2008 11:26:12 +0000 (20:26 +0900)]
libata: don't normalize UNKNOWN to NONE after reset

After non-classifying reset, ehc->classes[] could contain
ATA_DEV_UNKNOWN which used to be normalized to ATA_DEV_NONE for
consistency.  However, this causes unfortunate side effect for drivers
which have non-classifying hardresets (e.g. sata_nv) by making
hardreset report ATA_DEV_NONE for non-classifying resets and thus
makes EH believe that the port is unoccupied and recovery can be
skipped.  The end result is that after a device is swapped with
another one, the new device isn't attached after the old one is
detached.

This patch makes ata_eh_reset() not normalize UNKNOWN to NONE after
non-classifying resets.  This fixes the above problem.  As UNKNOWN and
NONE are handled differently by only EH hotplug logic, this doesn't
cause other behavior changes.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata-pmp: propagate timeout to host link
Tejun Heo [Thu, 10 Jan 2008 04:41:23 +0000 (13:41 +0900)]
libata-pmp: propagate timeout to host link

Timeout on downstream command may indicate transmission problem on
host link.  Propagate timeouts to host link.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata-pmp: 4726 hates SRST
Tejun Heo [Thu, 10 Jan 2008 04:38:46 +0000 (13:38 +0900)]
libata-pmp: 4726 hates SRST

4726 hates SRST even on non-config ports.  Don't use it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agopata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversion
Rod Whitby [Sun, 6 Jan 2008 01:05:28 +0000 (10:05 +0900)]
pata_ixp4xx_cf: fix compilation introduced by ata_port_desc() conversion

Fixes a compilation error caused by ata_port_desc() conversion
(cbcdd87593a1d85c5c4b259945a3a09eee12814d).

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agopata_pdc202xx_old: Further fixups
Alan Cox [Fri, 4 Jan 2008 00:08:49 +0000 (00:08 +0000)]
pata_pdc202xx_old: Further fixups

Turns out distros always enabled burst mode and it is pretty essential so
do the same. Also sort out the post DMA mode restore properly.

My 20263 card now seems happy but needs some four drive tests done yet
(when I've persuaded the kernel not to hang in the edd boot code if I
plug them in ..)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata-sff: PCI IRQ handling fix
Alan Cox [Thu, 3 Jan 2008 17:22:28 +0000 (17:22 +0000)]
libata-sff: PCI IRQ handling fix

It is legitimate (although annoying and silly) for a PCI IDE controller
not to be assigned an interrupt and to be polled. The libata-sff code
should therefore not try and request IRQ 0 in this case.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agosata_qstor: use hardreset instead of softreset
Tejun Heo [Thu, 3 Jan 2008 15:22:19 +0000 (00:22 +0900)]
sata_qstor: use hardreset instead of softreset

During conversion to new EH, sata_qstor was accidentaly changed to use
softreset, which is buggy on this chip, instead of hardreset.  This
patch updates sata_qstor such that it uses hardreset again.

This fixes bugzilla bug 9631.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoNFSv4: Give the lock stateid its own sequence queue
Trond Myklebust [Thu, 10 Jan 2008 21:07:54 +0000 (16:07 -0500)]
NFSv4: Give the lock stateid its own sequence queue

Sharing the open sequence queue causes a deadlock when we try to take
both a lock sequence id and and open sequence id.

This fixes the regression reported by Dimitri Puzin and Jeff Garzik: See

http://bugzilla.kernel.org/show_bug.cgi?id=9712

for details.

Reported-and-tested-by: Dimitri Puzin <bugs@psycast.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agort2x00: Put 802.11 data on 4 byte boundary
Ivo van Doorn [Sun, 6 Jan 2008 22:40:27 +0000 (23:40 +0100)]
rt2x00: Put 802.11 data on 4 byte boundary

Check the size of the ieee80211 header during rxdone
and make sure the data behind the ieee80211 header
is placed on a 4 byte boundary.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Corectly initialize rt2500usb MAC
Ivo van Doorn [Wed, 9 Jan 2008 18:18:25 +0000 (19:18 +0100)]
rt2x00: Corectly initialize rt2500usb MAC

mac is a pointer, obviously we shouldn't use the address
of a pointer as MAC address.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Allow rt61 to catch up after a missing tx report
Mattias Nissler [Mon, 12 Nov 2007 14:03:12 +0000 (15:03 +0100)]
rt2x00: Allow rt61 to catch up after a missing tx report

Sometimes it happens in the tx path that an entry given to the hardware isn't
reported in the txdone handler. This ultimately led to the dreaded "non-free
entry in the non-full queue" message and the stopping of the tx queue. Work
around this issue by allowing the driver to also clear out previos entries in
the txdone handler.

Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[CRYPTO] padlock: Fix alignment fault in aes_crypt_copy
Herbert Xu [Thu, 10 Jan 2008 21:09:35 +0000 (08:09 +1100)]
[CRYPTO] padlock: Fix alignment fault in aes_crypt_copy

The previous patch fixed spurious read faults from occuring by copying
the data if we happen to have a single block at the end of a page.  It
appears that gcc cannot guarantee 16-byte alignment in the kernel with
__attribute__.  The following report from Torben Viets shows a buffer
that's only 8-byte aligned:

> eneral protection fault: 0000 [#1]
> Modules linked in: xt_TCPMSS xt_tcpmss iptable_mangle ipt_MASQUERADE
> xt_tcpudp xt_mark xt_state iptable_nat nf_nat nf_conntrack_ipv4
> iptable_filter ip_tables x_tables pppoe pppox af_packet ppp_generic slhc
> aes_i586
> CPU:    0
> EIP:    0060:[<c035b828>]    Not tainted VLI
> EFLAGS: 00010292   (2.6.23.12 #7)
> EIP is at aes_crypt_copy+0x28/0x40
> eax: f7639ff0   ebx: f6c24050   ecx: 00000001   edx: f6c24030
> esi: f7e89dc8   edi: f7639ff0   ebp: 00010000   esp: f7e89dc8

Since the hardware must have 16-byte alignment, the following patch fixes
this by open coding the alignment adjustment.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
16 years ago[ARM] vfp: fix fuitod/fsitod instructions
Russell King [Thu, 10 Jan 2008 17:07:08 +0000 (17:07 +0000)]
[ARM] vfp: fix fuitod/fsitod instructions

These two instructions exceptionally take a single precision register
as their operand.  This means we can't use vfp_get_dm() to read the
register number - we need to use vfp_get_sm() instead.  Add a flag to
indicate this exception to the general rule.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[POWERPC] efika: add phy-handle property for fec_mpc52xx
Olaf Hering [Wed, 9 Jan 2008 14:06:08 +0000 (01:06 +1100)]
[POWERPC] efika: add phy-handle property for fec_mpc52xx

The new network driver fec_mpc52xx will not work on efika because the
firmware does not provide all required properties.
http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to
create more properties. But only the phy stuff is required to get a
working network.

This should go into the kernel because its appearently
impossible to boot the script via tftp and then load the real boot
binary (yaboot or zimage).

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
16 years ago[ARM] pxa: silence warnings from cpu_is_xxx() macros
Russell King [Thu, 10 Jan 2008 12:33:54 +0000 (12:33 +0000)]
[ARM] pxa: silence warnings from cpu_is_xxx() macros

If only a single CPU type is selected, __cpu_is_xxx() doesn't
use its argument.  This causes the compiler to issue a warning
about an unused variable in the parent function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[SCSI] qla1280: fix 32 bit segment code
FUJITA Tomonori [Tue, 8 Jan 2008 14:07:01 +0000 (23:07 +0900)]
[SCSI] qla1280: fix 32 bit segment code

There's an error remaining in the 32 bit descriptor code after the
conversion to dma accessors:  req_cnt is left uninitialised.

qla1280_32bit_start_scsi gives the following warnings:

drivers/scsi/qla1280.c: In function 'qla1280_32bit_start_scsi':
drivers/scsi/qla1280.c:3044: warning: unused variable 'dma_handle'
drivers/scsi/qla1280.c: In function 'qla1280_queuecommand':
drivers/scsi/qla1280.c:3060: warning: 'req_cnt' is used uninitialized in this function
drivers/scsi/qla1280.c:3042: note: 'req_cnt' was declared here

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 9 Jan 2008 16:05:12 +0000 (08:05 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (36 commits)
  [ATM]: Check IP header validity in mpc_send_packet
  [IPV6]: IPV6_MULTICAST_IF setting is ignored on link-local connect()
  [CONNECTOR]: Don't touch queue dev after decrement of ref count.
  [SOCK]: Adds a rcu_dereference() in sk_filter
  [XFRM]: xfrm_algo_clone() allocates too much memory
  [FORCEDETH]: Fix reversing the MAC address on suspend.
  [NET]: mcs7830 passes msecs instead of jiffies to usb_control_msg
  [LRO] Fix lro_mgr->features checks
  [NET]: Clone the sk_buff 'iif' field in __skb_clone()
  [IPV4] ROUTE: ip_rt_dump() is unecessary slow
  [NET]: kaweth was forgotten in msec switchover of usb_start_wait_urb
  [NET] Intel ethernet drivers: update MAINTAINERS
  [NET]: Make ->poll() breakout consistent in Intel ethernet drivers.
  [NET]: Stop polling when napi_disable() is pending.
  [NET]: Fix drivers to handle napi_disable() disabling interrupts.
  [NETXEN]: Fix ->poll() done logic.
  mac80211: return an error when SIWRATE doesn't match any rate
  ssb: Fix probing of PCI cores if PCI and PCIE core is available
  [NET]: Do not check netif_running() and carrier state in ->poll()
  [NET]: Add NAPI_STATE_DISABLE.
  ...

16 years agoshow_task: real_parent
Roland McGrath [Wed, 9 Jan 2008 08:03:23 +0000 (00:03 -0800)]
show_task: real_parent

The show_task function invoked by sysrq-t et al displays the
pid and parent's pid of each task.  It seems more useful to
show the actual process hierarchy here than who is using
ptrace on each process.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years ago[ATM]: Check IP header validity in mpc_send_packet
Herbert Xu [Wed, 9 Jan 2008 11:51:59 +0000 (03:51 -0800)]
[ATM]: Check IP header validity in mpc_send_packet

Al went through the ip_fast_csum callers and found this piece of code
that did not validate the IP header.  While root crashing the machine
by sending bogus packets through raw or AF_PACKET sockets isn't that
serious, it is still nice to react gracefully.

This patch ensures that the skb has enough data for an IP header and
that the header length field is valid.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: IPV6_MULTICAST_IF setting is ignored on link-local connect()
Brian Haley [Wed, 9 Jan 2008 07:52:21 +0000 (23:52 -0800)]
[IPV6]: IPV6_MULTICAST_IF setting is ignored on link-local connect()

Signed-off-by: Brian Haley <brian.haley@hp.com>
Acked-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>