Input: wistron - introduce generic keymap

It turns out that the keymaps in the wistron driver are almost the
same, the main difference being some keys which may not exist and
leds which might not be present. Therefore it's possible to write
a generic keymap which would allow the use of an unknown keyboard
with little drawbacks. The user can select it specifying the parameter
"keymap=generic".

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: wistron - add acerhk laptop database

Acerhk supports already a lot of laptops. Lets import its database so
that everyone can benefit of the work of Olaf Tauber. Only the "tm_new"
laptops were imported. "tm_old" laptops could be possible but requires
more testing and probably only few laptops are still alive. "dritek"
laptops should probably be imported into a different driver. Also compress
the keymaps by fitting each entry on an int. Most of the dmi matching was
written based on google searches, so it's rather prone to errors. That's
why I'm asking people to confirm it works.

Support to generate switch input events was added as some laptops indicate
lid open/close through this interface.

This adds the following hardware:
Acer TravelMate 370
Acer TravelMate 380
Acer TravelMate C300
Acer TravelMate C100
Acer TravelMate C110
Acer TravelMate 250
Acer TravelMate 350
Acer TravelMate 620
Acer TravelMate 630
Acer TravelMate 220
Acer TravelMate 230
Acer TravelMate 260
Acer TravelMate 280
Acer TravelMate 360
Acer TravelMate 2100
Acer TravelMate 2410
Acer Aspire 1500
Acer Aspire 1600
Acer Aspire 3020
Acer Aspire 5020
Medion MD 2900
Medion MD 40100
Medion MD 95400
Medion MD 96500
Fujitsu Siemens Amilo 7820

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: logips2pp - ignore mice reporting model as 0

There are mice reporting to logitech's queries with model
of 0. Do not claim that these are Logitech mice.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: i8042 - disable interfaces when switching to legacy mode

Disable both keyboard and auxiliary interfaces before switching
to legacy mode to prevent atkbd from getting "empty" interrupts.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: mousedev - fix sudden warps with touchpads

Pete Zaitcev reports that with his touchpad, if he lifts the finger
and places it elsewhere, the pointer sometimes warps dramatically.
This happens because we don't store coordinates unless we detect a
touch so sometimes we have stale coordinates in queue (from where
the finger left the pad) and averaging makes cursor to jump across
the screen. The solution is to always store the latest coordinates.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: ALPS - handle errors from input_register_device()

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: remove no longer used power.c handler

Delete the never-compiled source file drivers/input/power.c, and
remove its entry from the corresponding Makefile, as there is no
Kconfig file that refers to the config option INPUT_POWER

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: keyboard handler - use printk_ratelimit()

Use printk_ratelimit() to protect ourselves from buggy drivers or
devices endlessly generating invalid events.

Suggested by Andrew Morton.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: synaptics - export model bits

Encode synaptics model in psmouse->model so it will be
exported via sysfs as input_dev->id.version and become
visible for applications.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: iforce - use usb_kill_urb instead of usb_unlink_urb

Using usb_unlink_urb can cause iforce_open to fail when called
soon after iforce_release. Also updated my email address and
replaced calls to printk() by dbg(), warn(), info(), err()...

Signed-off-by: Johann Deneux <johann.deneux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: handlers - handle errors from input_open_device()

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: handlers - rename 'list' to 'client'

The naming convention in input handlers was very confusing -
client stuctures were called lists, regular lists were also
called lists making anyone looking at the code go mad.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: rework handle creation code

 - consolidate code for binding handlers to a device
 - return error codes from handlers connect() methods back to input
   core and log failures

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: i8042 - add HP Pavilion DV4017EA to the MUX blacklist

This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0"
messages caused by broken MUX implementation. The box does not
have external PS/2 ports so disabling MUX mode is safe.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: HIL - fix rwlock recursion bug

The following bug happens when insmoding hp_sdc_mlc.ko:

    HP SDC MLC: Registering the System Domain Controller's HIL MLC.
    BUG: rwlock recursion on CPU#0, hotplug/1814, 00854734
    Backtrace:
     [<10267560>] _raw_write_lock+0x50/0x88
     [<10104008>] _write_lock_irqsave+0x14/0x24
     [<008537d4>] hp_sdc_mlc_out+0x38/0x25c [hp_sdc_mlc]
     [<0084ebd8>] hilse_donode+0x308/0x470 [hil_mlc]
     [<0084ed80>] hil_mlcs_process+0x40/0x6c [hil_mlc]
     [<10130f80>] tasklet_action+0x78/0xb8
     [<10130cec>] __do_softirq+0x60/0xcc
     [<1010428c>] __lock_text_end+0x38/0x48
     [<10108348>] do_cpu_irq_mask+0xf0/0x11c
     [<1010b068>] intr_return+0x0/0xc

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: add support for PXA27x keyboard controller

Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: sermouse - improve protocol error recovery

When using MS protocol the driver should wait for a byte with
bit 6 set before assuming that it sees beginning of a data packet.
This should allow driver better cope with lost bytes and prevent
spurious left/right button events when serial communication is
disturbed by a CPU-hungry real-time process.

Also fix some formatting.

Signed-off-by: Peter Osterlund <petero2@telia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: simplify input_free_device()

Now that sysfs attributes that were marked for deletion can't access
their devices we do not need to set name, phys and uniq to NULL.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: add getkeycode and setkeycode methods

Allow drivers to implement their own get and set keycode methods. This
will allow drivers to change their keymaps without allocating huge
tables covering entire range of possible scancodes.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: psmouse - allow disabing certain protocol extensions

Allow ALPS, LOGIPS2PP, LIFEBOOK, TRACKPOINT and TOUCHKIT protocol
extensions of psmouse to be disabled during compilation. This will
allow users save some memory when they are sure that they will only
use a certain type of mice.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: let driver core create class device attribute groups

Rely on device core to create attribute groups for input devices
instead of open-coding it.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: export 'uniq' in /proc/bus/input/devices

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: wistron - add support for TravelMate 610

Add support for Acer TravelMate 610 to wistron_btns. All special keys
are detected, but the 2 leds are not handled (yet).

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: psmouse - do not force stream mode

Forcing stream mode after reset confuses some devices (reported
by Andrea Arcangeli) so let's take it out - spec says that after
reset mouse should already be in stream mode.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: HIL - cleanup coding style

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: HIL - various fixes for HIL drivers

 - mark some structures const or __read_mostly
 - hilkbd.c: fix uninitialized spinlock in HIL keyboard driver
 - hil_mlc.c: use USEC_PER_SEC instead of 1000000
 - hp_sdc: bugfix for request_irq()/free_irq() parameters, this prevented
           multiple load/unload cycles as module

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: ads7846 - add support for the ads7843 touchscreen

The ads7843 support has now become almost trivial since the last
rework.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: add driver for MIPS Cobalt back panel buttons

Tested on Cobalt Qube2.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: psmouse - add support for eGalax PS/2 touchscreen controller

Based on the touchkit USB and lifebook PS/2 touchscreen driver.

The egalax touchsreen controller (PS/2 or USB version) is used in this 7"
device: http://www.cartft.com/catalog/il/449

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: remove obsolete setup parameters from input drivers

They have been marked as __obsolete_setup() for several years,
it is time for them to go.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: HIL - fix improper call to release_region()

Do not call release_region() if the code has been compiled
without CONFIG_HP300 support.

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: hid-lgff - treat devices as joysticks unless told otherwise

By default threat devices as joysticks with constant force-feedback
effect.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: HID - add support for Logitech Formula Force EX

Signed-off-by: Johann Deneux <johann.deneux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: gpio-keys - switch to common GPIO API

This adds support for at least SA1100 and S3C24xx CPUs.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: do not lock device when showing name, phys and uniq

Now that sysfs attributes return -ENODEV once driver requests their
removal we do not need to handle scenario when data is deleted from
under our feet and can simplify the code.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: i8042 - let serio bus suspend ports

Let serio subsystem take care of suspending the ports; concentrate
on suspending/resuming the controller itself.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: psmouse - properly reset mouse on shutdown/suspend

Some people report that they need psmouse module unloaded
for suspend to ram/disk to work properly. Let's make port
cleanup behave the same way as driver unload.

This fixes "bad state" roblem on various HP laptops, such
as nx7400.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Merge branch 'for-linus' of git://atmel.no/~hskinnemoen/linux/kernel/avr32

* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
  [AVR32] Use per-controller spi_board_info structures
  [AVR32] Warn, don't BUG if clk_disable is called too many times
  [AVR32] Make sure all genclocks have a parent
  [AVR32] Remove unnecessary sys_nfsservctl conditional
  [AVR32] Wire up the SysV IPC calls properly
  [AVR32] Define ioremap_nocache, ioport_map and ioport_unmap
  [AVR32] Fix prototypes for __raw_writesb and friends

Merge /pub/scm/linux/kernel/git/davej/agpgart

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] allow drm populated agp memory types cleanups
  [AGPGART] intel-agp: Use ARRAY_SIZE macro when appropriate
  [AGPGART] Add agp-type-to-mask-type method missing from some drivers.
  [AGPGART] Don't try to remap i810 registers on resume.
  [AGPGART] Allow drm-populated agp memory types
  [AGPGART] compat ioctl

Merge /pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Longhaul - Redo Longhaul ver. 2
  [CPUFREQ] EPS - Correct 2nd brand test
  [CPUFREQ] Longhaul - Separate frequency and voltage transition
  [CPUFREQ] Longhaul - Models of Nehemiah
  [CPUFREQ] Whitespace fixup
  [CPUFREQ] Longhaul - Simplier minmult
  [CPUFREQ] CPU_FREQ_TABLE shouldn't be a def_tristate
  [CPUFREQ] ondemand governor use new cpufreq rwsem locking in work callback
  [CPUFREQ] ondemand governor restructure the work callback
  [CPUFREQ] Rewrite lock in cpufreq to eliminate cpufreq/hotplug related issues
  [CPUFREQ] Remove hotplug cpu crap
  [CPUFREQ] Enhanced PowerSaver driver
  [CPUFREQ] Longhaul - Add VT8235 support
  [CPUFREQ] Longhaul - Fix guess_fsb function
  [CPUFREQ] Longhaul - Remove duplicate tables
  [CPUFREQ] Longhaul - Introduce Nehemiah C
  [CPUFREQ] fix cpuinfo_cur_freq for CPU_HW_PSTATE
  [CPUFREQ] Longhaul - Remove "ignore_latency" option

[PATCH] s3c2410fb: fix un-initialised dev field

The current driver is not setting the dev field in the private data
structure, which can lead to an OOPS if the driver tries to report an
error.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ecryptfs: fix forgotten format specifier

Add format specifier %d for uid in ecryptfs_printk

Signed-off-by: Thomas Hisch <t.hisch@gmail.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] eCryptfs: Reduce stack usage in ecryptfs_generate_key_packet_set()

eCryptfs is gobbling a lot of stack in ecryptfs_generate_key_packet_set()
because it allocates a temporary memory-hungry ecryptfs_key_record struct.
This patch introduces a new kmem_cache for that struct and converts
ecryptfs_generate_key_packet_set() to use it.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: stop NFSD writes from being broken into lots of little writes to filesystem

When NFSD receives a write request, the data is typically in a number of
1448 byte segments and writev is used to collect them together.

Unfortunately, generic_file_buffered_write passes these to the filesystem
one at a time, so an e.g.  32K over-write becomes a series of partial-page
writes to each page, causing the filesystem to have to pre-read those pages
- wasted effort.

generic_file_buffered_write handles one segment of the vector at a time as
it has to pre-fault in each segment to avoid deadlocks.  When writing from
kernel-space (and nfsd does) this is not an issue, so
generic_file_buffered_write does not need to break and iovec from nfsd into
little pieces.

This patch avoids the splitting when  get_fs is KERNEL_DS as it is
from NFSd.

This issue was introduced by commit 6527c2bdf1f833cc18e8f42bd97973d583e4aa83

Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Norman Weathers <norman.r.weathers@conocophillips.com>
Cc: Vladimir V. Saveliev <vs@namesys.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: nfsd4: fix handling of directories without default ACLs

When setting an ACL that lacks inheritable ACEs on a directory, we should set
a default ACL of zero length, not a default ACL with all bits denied.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: nfsd4: acls: avoid unnecessary denies

We're inserting deny's between some ACEs in order to enforce posix draft acl
semantics which prevent permissions from accumulating across entries in an
acl.

That's fine, but we're doing that by inserting a deny after *every* allow,
which is overkill.  We shouldn't be adding them in places where they actually
make no difference.

Also replaced some helper functions for creating acl entries; I prefer just
assigning directly to the struct fields--it takes a few more lines, but the
field names provide some documentation that I think makes the result easier
understand.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: nfsd4: acls: don't return explicit mask

Return just the effective permissions, and forget about the mask.  It isn't
worth the complexity.

WARNING: This breaks backwards compatibility with overly-picky nfsv4->posix
acl translation, as may has been included in some patched versions of libacl.
To our knowledge no such version was every distributed by anyone outside citi.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: nfsd4: fix error return on unsupported acl

We should be returning ATTRNOTSUPP, not NOTSUPP, when acls are unsupported.

Also fix a comment.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: nfsd4: fix memory leak on kmalloc failure in savemem

The wrong pointer is being kfree'd in savemem() when defer_free returns with
an error.

Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: nfsd4: represent nfsv4 acl with array instead of linked list

Simplify the memory management and code a bit by representing acls with an
array instead of a linked list.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: nfsd4: simplify nfsv4->posix translation

The code that splits an incoming nfsv4 ACL into inheritable and effective
parts can be combined with the the code that translates each to a posix acl,
resulting in simpler code that requires one less pass through the ACL.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: nfsd4: relax checking of ACL inheritance bits

The rfc allows us to be more permissive about the ACL inheritance bits we
accept:

"If the server supports a single "inherit ACE" flag that applies to
both files and directories, the server may reject the request
(i.e., requiring the client to set both the file and directory
inheritance flags). The server may also accept the request and
silently turn on the ACE4_DIRECTORY_INHERIT_ACE flag."

Let's take the latter option--the ACL is a complex attribute that could be
rejected for a wide variety of reasons, and the protocol gives us little
ability to explain the reason for the rejection, so erroring out is a
user-unfriendly last resort.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: nfsd4: fix non-terminated string

The server name is expected to be a null-terminated string, so we can't pass
in the raw client identifier.

What's more, the client identifier is just a binary, not necessarily
printable, blob.  Let's just use the ip address instead.  The server name
appears to exist just to help debugging by making some printk's more
informative.

Note that the string is copies into the rpc client structure, so the pointer
to the local variable does not outlive the function call.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] small irq management simplification

Use mask_ack_irq() where possible.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] IRQ kernel-doc fixes

Fix kernel-doc warnings in IRQ management.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] genirq: remove IRQ_DISABLED

Now that disable_irq() defaults to delayed-disable semantics, the IRQ_DISABLED
flag is not needed anymore.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] genirq: do not mask interrupts by default

Never mask interrupts immediately upon request.  Disabling interrupts in
high-performance codepaths is rare, and on the other hand this change could
recover lost edges (or even other types of lost interrupts) by conservatively
only masking interrupts after they happen.  (NOTE: with this change the
highlevel irq-disable code still soft-disables this IRQ line - and if such an
interrupt happens then the IRQ flow handler keeps the IRQ masked.)

Mark i8529A controllers as 'never loses an edge'.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] posix timers: RCU optimization for clock_gettime()

Use RCU to avoid the need to acquire tasklist_lock in the single-threaded
case of clock_gettime().  It still acquires tasklist_lock when for a
(potentially multithreaded) process.  This change allows realtime
applications to frequently monitor CPU consumption of individual tasks, as
requested (and now deployed) by some off-list users.

This has been in Ingo Molnar's -rt patchset since late 2005 with no
problems reported, and tests successfully on 2.6.20-rc6, so I believe that
it is long-since ready for mainline adoption.

[paulmck@linux.vnet.ibm.com: fix exit()/posix_cpu_clock_get() race spotted by Oleg]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] time: x86_64: re-enable vsyscall support for x86_64

Cleanup and re-enable vsyscall gettimeofday using the generic clocksource
infrastructure.

[akpm@osdl.org: cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] time: x86_64: convert x86_64 to use GENERIC_TIME

This patch converts x86_64 to use the GENERIC_TIME infrastructure and adds
clocksource structures for both TSC and HPET (ACPI PM is shared w/ i386).

[akpm@osdl.org: fix printk timestamps]
[akpm@osdl.org: fix printk ckeanups]
[akpm@osdl.org: hpet build fix]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] time: x86_64: split x86_64/kernel/time.c up

In preparation for the x86_64 generic time conversion, this patch splits out
TSC and HPET related code from arch/x86_64/kernel/time.c into respective
hpet.c and tsc.c files.

[akpm@osdl.org: fix printk timestamps]
[akpm@osdl.org: cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] time: x86_64: hpet_address cleanup

In preparation for supporting generic timekeeping, this patch cleans up
x86-64's use of vxtime.hpet_address, changing it to just hpet_address as is
also used in i386.  This is necessary since the vxtime structure will be going
away.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] generic: vsyscall-gtod support for GENERIC_TIME

Provides generic infrastructure for vsyscall-gtod.

[akpm@osdl.org: cleanup]
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Add SysRq-Q to print timer_list debug info

Add SysRq-Q to print pending timers and other timer info.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Add debugging feature /proc/timer_list

add /proc/timer_list, which prints all currently pending (high-res) timers,
all clock-event sources and their parameters in a human-readable form.

Sample output:

Timer List Version: v0.1
HRTIMER_MAX_CLOCK_BASES: 2
now at 4246046273872 nsecs

cpu: 0
 clock 0:
  .index:      0
  .resolution: 1 nsecs
  .get_time:   ktime_get_real
  .offset:     1273998312645738432 nsecs
active timers:
 clock 1:
  .index:      1
  .resolution: 1 nsecs
  .get_time:   ktime_get
  .offset:     0 nsecs
active timers:
 #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_stop_sched_tick, swapper/0
 # expires at 4246432689566 nsecs [in 386415694 nsecs]
 #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, pcscd/2050
 # expires at 4247018194689 nsecs [in 971920817 nsecs]
 #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, irqbalance/1909
 # expires at 4247351358392 nsecs [in 1305084520 nsecs]
 #3: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, crond/2157
 # expires at 4249097614968 nsecs [in 3051341096 nsecs]
 #4: <f5a90ec8>, it_real_fn, do_setitimer, syslogd/1888
 # expires at 4251329900926 nsecs [in 5283627054 nsecs]
  .expires_next   : 4246432689566 nsecs
  .hres_active    : 1
  .check_clocks   : 0
  .nr_events      : 31306
  .idle_tick      : 4246020791890 nsecs
  .tick_stopped   : 1
  .idle_jiffies   : 986504
  .idle_calls     : 40700
  .idle_sleeps    : 36014
  .idle_entrytime : 4246019418883 nsecs
  .idle_sleeptime : 4178181972709 nsecs

cpu: 1
 clock 0:
  .index:      0
  .resolution: 1 nsecs
  .get_time:   ktime_get_real
  .offset:     1273998312645738432 nsecs
active timers:
 clock 1:
  .index:      1
  .resolution: 1 nsecs
  .get_time:   ktime_get
  .offset:     0 nsecs
active timers:
 #0: <f5a90ec8>, hrtimer_sched_tick, hrtimer_restart_sched_tick, swapper/0
 # expires at 4246050084568 nsecs [in 3810696 nsecs]
 #1: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, atd/2227
 # expires at 4261010635003 nsecs [in 14964361131 nsecs]
 #2: <f5a90ec8>, hrtimer_wakeup, do_nanosleep, smartd/2332
 # expires at 5469485798970 nsecs [in 1223439525098 nsecs]
  .expires_next   : 4246050084568 nsecs
  .hres_active    : 1
  .check_clocks   : 0
  .nr_events      : 24043
  .idle_tick      : 4246046084568 nsecs
  .tick_stopped   : 0
  .idle_jiffies   : 986510
  .idle_calls     : 26360
  .idle_sleeps    : 22551
  .idle_entrytime : 4246043874339 nsecs
  .idle_sleeptime : 4170763761184 nsecs

tick_broadcast_mask: 00000003
event_broadcast_mask: 00000001

CPU#0's local event device:

Clock Event Device: lapic
 capabilities:   0000000e
 max_delta_ns:   807385544
 min_delta_ns:   1443
 mult:           44624025
 shift:          32
 set_next_event: lapic_next_event
 set_mode:       lapic_timer_setup
 event_handler:  hrtimer_interrupt
  .installed:  1
  .expires:    4246432689566 nsecs

CPU#1's local event device:

Clock Event Device: lapic
 capabilities:   0000000e
 max_delta_ns:   807385544
 min_delta_ns:   1443
 mult:           44624025
 shift:          32
 set_next_event: lapic_next_event
 set_mode:       lapic_timer_setup
 event_handler:  hrtimer_interrupt
  .installed:  1
  .expires:    4246050084568 nsecs

Clock Event Device: hpet
 capabilities:   00000007
 max_delta_ns:   2147483647
 min_delta_ns:   3352
 mult:           61496110
 shift:          32
 set_next_event: hpet_next_event
 set_mode:       hpet_set_mode
 event_handler:  handle_nextevt_broadcast

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Add debugging feature /proc/timer_stat

Add /proc/timer_stats support: debugging feature to profile timer expiration.
Both the starting site, process/PID and the expiration function is captured.
This allows the quick identification of timer event sources in a system.

Sample output:

# echo 1 > /proc/timer_stats
# cat /proc/timer_stats
Timer Stats Version: v0.1
Sample period: 4.010 s
  24,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
  11,     0 swapper          sk_reset_timer (tcp_delack_timer)
   6,     0 swapper          hrtimer_stop_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
  17,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   2,     1 swapper          queue_delayed_work_on (delayed_work_timer_fn)
   4,  2050 pcscd            do_nanosleep (hrtimer_wakeup)
   5,  4179 sshd             sk_reset_timer (tcp_write_timer)
   4,  2248 yum-updatesd     schedule_timeout (process_timeout)
  18,     0 swapper          hrtimer_restart_sched_tick (hrtimer_sched_tick)
   3,     0 swapper          sk_reset_timer (tcp_delack_timer)
   1,     1 swapper          neigh_table_init_no_netlink (neigh_periodic_timer)
   2,     1 swapper          e1000_up (e1000_watchdog)
   1,     1 init             schedule_timeout (process_timeout)
100 total events, 25.24 events/sec

[ cleanups and hrtimers support from Thomas Gleixner <tglx@linutronix.de> ]
[bunk@stusta.de: nr_entries can become static]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: prevent possible itimer DoS

Fix potential setitimer DoS with high-res timers by pushing itimer rearm
processing to process context.

[Fixes from: Ingo Molnar <mingo@elte.hu>]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: add high resolution timer support

Implement high resolution timers on top of the hrtimers infrastructure and the
clockevents / tick-management framework.  This provides accurate timers for
all hrtimer subsystem users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386: enable dynticks in kconfig

Enable dynamic ticks selection.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386 prepare nmi watchdog for dynticks

The NMI watchdog implementation assumes that the local APIC timer interrupt is
happening.  This assumption is not longer true when high resolution timers and
dynamic ticks come into play, as they may switch off the local APIC timer
completely.  Take the PIT/HPET interrupts into account too, to avoid false
positives.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386 prepare for dyntick

Prepare i386 for dyntick: idle handler callbacks.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386 rework local apic timer calibration

The local apic timer calibration has two problem cases:

1.  The calibration is based on readout of the PIT/HPET timer to detect the
   wrap of the periodic tick.  It happens that a box gets stuck in the
   calibration loop due to a PIT with a broken readout function.

2.  CoreDuo boxen show a sporadic PIT runs too slow defect, which results
   in a wrong lapic calibration.  The PIT goes back to normal operation once
   the lapic timer is switched to periodic mode.

Both are existing and unfixed problems in the current upstream kernel and
prevent certain laptops and other systems from booting Linux.

Rework the code to address both problems:

- Make the calibration interrupt driven.  This removes the wait_timer_tick
  magic hackery from lapic.c and time_hpet.c.  The clockevents framework
  allows easy substitution of the global tick event handler for the
  calibration.  This is more accurate than monitoring jiffies.  At this point
  of the boot process, nothing disturbes the interrupt delivery, so the
  results are very accurate.

- Verify the calibration against the PM timer, when available by using the
  early access function.  When the measured calibration period is outside of
  an one percent window, then the lapic timer calibration is adjusted to the
  pm timer result.

- Verify the calibration by running the lapic timer with the calibration
  handler.  Disable lapic timer in case of deviation.

This also removes the "synchronization" of the local apic timer to the global
tick.  This synchronization never worked, as there is no way to synchronize
PIT(HPET) and local APIC timer.  The synchronization by waiting for the tick
just alignes the local APIC timer for the first events, but later the events
drift away due to the different clocks.  Removing the "sync" is just
randomizing the asynchronous behaviour at setup time.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Zachary Amsden <zach@vmware.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] clockevents: i386 drivers

Add clockevent drivers for i386: lapic (local) and PIT/HPET (global).  Update
the timer IRQ to call into the PIT/HPET driver's event handler and the
lapic-timer IRQ to call into the lapic clockevent driver.  The assignement of
timer functionality is delegated to the core framework code and replaces the
compile and runtime evalution in do_timer_interrupt_hook()

Use the clockevents broadcast support and implement the lapic_broadcast
function for ACPI.

No changes to existing functionality.

[ kdump fix from Vivek Goyal <vgoyal@in.ibm.com> ]
[ fixes based on review feedback from Arjan van de Ven <arjan@infradead.org> ]
Cleanups-from: Adrian Bunk <bunk@stusta.de>
Build-fixes-from: Andrew Morton <akpm@osdl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tick-management: dyntick / highres functionality

With Ingo Molnar <mingo@elte.hu>

Add functions to provide dynamic ticks and high resolution timers.  The code
which keeps track of jiffies and handles the long idle periods is shared
between tick based and high resolution timer based dynticks.  The dyntick
functionality can be disabled on the kernel commandline.  Provide also the
infrastructure to support high resolution timers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tick-management: broadcast functionality

With Ingo Molnar <mingo@elte.hu>

Add broadcast functionality, so per cpu clock event devices can be registered
as dummy devices or switched from/to broadcast on demand.  The broadcast
function distributes the events via the broadcast function of the clock event
device.  This is primarily designed to replace the switch apic timer to / from
IPI in power states, where the apic stops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] tick-management: core functionality

With Ingo Molnar <mingo@elte.hu>

The tick-management code is the first user of the clockevents layer.  It takes
clock event devices from the clock events core and uses them to provide the
periodic tick.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] clockevents: add core functionality

Architectures register their clock event devices, in the clock events core.
Users of the clockevents core can get clock event devices for their use.  The
clockevents core code provides notification mechanisms for various clock
related management events.

This allows to control the clock event devices without the architectures
having to worry about the details of function assignment.  This is also a
preliminary for high resolution timers and dynamic ticks to allow the core
code to control the clock functionality without intrusive changes to the
architecture code.

[Fixes-by: Ingo Molnar <mingo@elte.hu>]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386, apic: clean up the APIC code

The apic code is quite unstructured and missing a lot of comments.

- Restructure the code into helper functions, timer, setup/shutdown,
  interrupt and power management blocks.
- Fixup comments.
- Namespace fixups
- Inline helpers for version and is_integrated
- Combine the ack_bad_irq functions

No functional changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Zachary Amsden <zach@vmware.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rohit Seth <rohitseth@google.com>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Allow early access to the power management timer

Allow early access to the power management timer by exposing the verified read
function and providing a helper function which checks the pmtmr_ioport
variable and returns either the pm timer readout or 0 in case the pm timer is
not available.

Create a new header file and replace also the ifdef'ed extern definition in
arch/i386/kernel/acpi/boot.c

This is a preperatory patch for the rework of the local apic timer
calibration.

No functional changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ACPI keep track of timer broadcasting

This is a preperatory patch for highres/dyntick:

- replace the big #ifdef ARCH_APICTIMER_STOPS_ON_C3 hackery by functions

- remove the double switch in the power verify function (in the worst case
  we switched ipi to apic and 20usec later apic to ipi)

- keep track of the the state which stops local APIC timer

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Len Brown <len.brown@intel.com>
Cc: <linux-acpi@vger.kernel.org>
Cc: Andi Kleen <ak@suse.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] ACPI: fix missing include for UP

apic.h does not get included on UP compiles.  That way the
APICTIMER_STOPS_ON_C3 is not there and UP boxen have no support for timer
broadcasting.  This was never noticed, because the lapic timer is only used
for profiling on UP.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: move and add documentation

Move the initial hrtimers.txt document to the new directory
"Documentation/hrtimers"

Add design notes for the high resolution timer and dynamic tick functionality.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: clean up callback tracking

Reintroduce ktimers feature "optimized away" by the ktimers review process:
remove the curr_timer pointer from the cpu-base and use the hrtimer state.

No functional changes.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers; add state tracking

Reintroduce ktimers feature "optimized away" by the ktimers review process:
multiple hrtimer states to enable the running of hrtimers without holding the
cpu-base-lock.

(The "optimized" rbtree hack carried only 2 states worth of information and we
need 4 for high resolution timers and dynamic ticks.)

No functional changes.

Build-fixes-from: Andrew Morton <akpm@osdl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: cleanup locking

Improve kernel/hrtimers.c locking: use a per-CPU base with a lock to control
locking of all clocks belonging to a CPU.  This simplifies code that needs to
lock all clocks at once.  This makes life easier for high-res timers and
dyntick.

No functional changes.

[ optimization change from Andrew Morton <akpm@osdl.org> ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: namespace and enum cleanup

- hrtimers did not use the hrtimer_restart enum and relied on the implict
  int representation. Fix the prototypes and the functions using the enums.
- Use seperate name spaces for the enumerations
- Convert hrtimer_restart macro to inline function
- Add comments

No functional changes.

[akpm@osdl.org: fix input driver]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Extend next_timer_interrupt() to use a reference jiffie

For CONFIG_NO_HZ we need to calculate the next timer wheel event based on a
given jiffie value.  Extend the existing code to allow the extra 'now'
argument.  Provide a compability function for the existing implementations to
call the function with now == jiffies.  (This also solves the racyness of the
original code vs.  jiffies changing during the iteration.)

No functional changes to existing users of this infrastructure.

[ remove WARN_ON() that triggered on s390, by Carsten Otte <cotte@de.ibm.com> ]
[ made new helper static, Adrian Bunk <bunk@stusta.de> ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Fix cascade lookup of next_timer_interrupt

When searching for the next pending timer in the timer wheel we need to take
the cascade into account.  The current code has several problems:

 1. it looks into the previous cascade
 2. it ignores a pending cascade
 3. it ignores multiple cascades

Change the cascade lookup, so it calculates the array index from the point of
the next cascade and always look at the cascade buckets, when the cascade is
pending, i.e.  gets executed in the next timer softirq.  When multiple
cascades are pending, then lookup the next buckets too.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] uninline irq_enter()

Uninline irq_enter().  [dynticks adds more stuff to it]

No functional changes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Mark TSC on GeodeLX reliable

The Geode can safely use the TSC for highres, since:

1) Does not support frequency scaling,

2) The TSC _does_ count when the CPU is halted.  Furthermore, the Geode
   supports a mode called "suspension on halt", where Suspend mode (which
   interacts with the power management states) is entered.  TSC counting
   during suspend mode is controlled by bit 8 of the Bus Controller
   Configuration Register #0 (thanks Tom!).

3) no SMP :)

Check if "RTSC counts during suspension" and remove the requirement for
verification, so the clocksource code can safely select it as an timesource
for the highres timers subsystem.

Signed-off-by: Marcelo Tosatti <marcelo@kvack.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] clocksource: Add verification (watchdog) helper

The TSC needs to be verified against another clocksource.  Instead of using
hardwired assumptions of available hardware, provide a generic verification
mechanism.  The verification uses the best available clocksource and handles
the usability for high resolution timers / dynticks of the clocksource which
needs to be verified.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] clocksource: Remove the update callback

The clocksource code allows direct updates of the rating of a given
clocksource now.  Change TSC unstable tracking to use this interface and
remove the update callback.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] clocksource: fixup is_continous changes on MIPS

Fixup the is_contionous replacement by a flag field.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] clocksource: fixup is_continous changes on S390

Fixup the is_contionous replacement by a flag field.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] clocksource: fixup is_continous changes on AVR32

Fixup the is_contionous replacement by a flag field.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] clocksource: fixup is_continous changes on ARM

Fixup the is_contionous replacement by a flag field.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] clocksource: replace is_continuous by a flag field

Using a flag filed allows to encode more than one information into a variable.
Preparatory patch for the generic clocksource verification.

[mingo@elte.hu: convert vmitime.c to the new clocksource flag]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] x86: rewrite SMP TSC sync code

make the TSC synchronization code more robust, and unify it between x86_64 and
i386.

The biggest change is the removal of the 'fix up TSCs' code on x86_64 and
i386, in some rare cases it was /causing/ time-warps on SMP systems.

The new code only checks for TSC asynchronity - and if it can prove a
time-warp (if it can observe the TSC going backwards when going from one CPU
to another within a critical section), then the TSC clock-source is turned
off.

The TSC synchronization-checking code also got moved into a separate file.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Simplify the registration of clocksources

Enqueue clocksources in rating order to make selection of the clocksource
easier.  Also check the match with an user override at enqueue time.

Preparatory patch for the generic clocksource verification.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386 Remove useless code in tsc.c

The delayed work code in arch/i386/kernel/tsc.c is an unused leftover of the
GTOD conversion. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>