staging: rtl8723au: Eliminate _rtw_queue_empty23a()

This was just a silly wrapper around list_empty()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_free_recvframe23a() is always passed precvpriv->free_recv_queue

No point in passing in the pointer to free_recv_queue, when we always
pass in the same value.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused semaphore 'allrxreturnevt'

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove ugly vmalloc() wrappers

Finally with the last user converted, get rid of ugly vmalloc wrappers

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use kmalloc instead of vmalloc to allocate recv_frame pool

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl723au: Remove some obsolete misleading comments

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stating: rtl8723au: Use kmalloc instead of vmalloc to allocate pool of xmit_frame_ext

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use kmalloc() rather than vmalloc() to allocate xmit_frames

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Declare rtw_alloc_xmitframe() static

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: fix potential leak in update_bcn_wps_ie()

Fix a potential leak in the error path of function update_bcn_wps_ie().
Move the affected input verification to the beginning of the function so
that it may return directly without leaking already allocated memory.
Detected by Coverity - CID 1077718.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Add GFP argument to rtw_alloc_stainfo23a()

No need to allocate GFP_ATOMIC when we don't need to.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use kernel memory allocator for sta_priv allocations

The kernel has a great memory allocator, use it instead of hacking up
something in the driver.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Eliminate stainfo_by_offset spaghetti

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: add GFP argument to rtw_alloc_network()

This allows us to use GFP_KERNEL when calling from a work handler.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_createbss_cmd23a_callback(): Relax holding of pmlmepriv->lock

We only really need to hold pmlmepriv->lock while calling
rtw_indicate_connect23a(). rtw_get_stainfo23a() and
rtw_alloc_stainfo23a() rely on pstapriv->sta_hash_lock and the non
WIFI_AP_STATE path relies on pmlmepvi->scanned_queue.lock, except we
need to used clr_fwstate() instead of _clr_fwstate_().

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_alloc_stainfo23a(): Remove unused variable tmp_aid

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_sta_mgt.c: Fix some formatting badness

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Get rid of second set of custom error codes

One set of custom error codes for the driver should more than
suffice. This allows us to get rid of odm_types.h as well.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove some unused clutter from odm_types.h

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused struct rtl8723a_priv

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove a bunch of unused clutter from the ODM code

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused ODM spin lock functions

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused ODM malloc/free functions

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use random ethaddr if EEPROM address is corrupted

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: wifi.h: remove more unused #defines

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use struct ieee80211_pspoll to obtain 'aid'

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fold get_hdr_bssid() into update_recvframe_phyinfo()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: update_recvframe_phyinfo(): Don't set variables twice

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: validate_recv_data_frame() use fctl knowledge to obtain bssid

Use the knowledge we already have from parsing the TODS/FROMDS bits in
hdr->frame_control to obtain the bssid.

Note that get_hdr_bssid() would never return NULL as handling 4
combinations of a 2 bit word leaves little space for falling through
to the 'default' value.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove to_fr_ds packet attribute

This is only used in one place - do the work there properly.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Declare validate_recv_*_frame() static

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove redundant check

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_wlan_util.c: Clean up the code

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtl8723a_recv.h: Don't put parenthesis around constants

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove a bunch of always true #ifdefs

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove a pile of unused firmware image file names

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_ioctl_set.h: Remove unused struct bssid_info

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused rtw_ioctl.h

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Eliminate struct qos_priv

Having struct qos_priv containing a single integer, and carrying a
dedicated header file for it, is just plain silly. Move the integer
into struct mlme_priv, which is the only place qos_priv was used
anyway, and get rid of the header file.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_event.h remove some unused structs and random blank lines

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Make event callbacks take a const u8 *

This avoids an ugly cast in mlme_evt_hdl23a()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Fix endian abnormality in mlme_evt_hdl23a()

Every other place uses C2HEvent_Header() for events. Given the struct
is endian dependant, use it here too to retrieve data from the parm
buffer.

Note the length field is not set/read in le order - question is
whether it's simply an opaque field?

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Move data byte-swap closer to register access

This makes sparse happy

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove unused + write-only entries from struct evt_priv

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Get rid of ugly cbuf interface

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Use workqueue to handle interrupt complete processing

Split the old work handler into a workqueue for processing
usb_read_interrupt_complete() events that require more than ust
clearing the event, and leave the old handler to just handle event
clearing.

This means we can get rid of the hacks with magic pointers to
determine what actions needs to be taken in the work handler, and
as an extra bonus obsoletes the bizarre cbuf code.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Name cmd workqueue appropriately to allow for more workqueues

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Remove rtw_free_cmd_priv23a()

This function no longer does anything, so get rid of it.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rsp_buf wasn't used for anything - don't allocate it

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: pass the cmd parm buffer directly to the cmd handler

commit 0348dc74f6689825c16db40fbe0ce6ad2da5bab9 ensured that the parm
buffer passed to the cmd handlers is not being over-written. Hence
there is no need to make a copy of the parm buffer just to pass it
into the cmd handler.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_ieee80211.c: Reduce some excessive parenthesis usage

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: rtw_ieee80211.c mark a couple of function static

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'imx-drm-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into staging-next

imx-drm fixes from Russell

Merge tag 'iio-for-3.16b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new drivers, cleanups and functionality for the 3.16 cycle.

This set contains a change to the ABI for the hid-sensors drivers to bring them
in line with the long published documentation.  Unfortunately, rather than
reporting true scale and offset values via sysfs they were reporting
some magic numbers that could only be converted to anything useful using
the HID sensors specification. I missed this entirely through the introduction
of a number of drivers, only picking up on it recently.  Srinivas has had
user feedback about this as well. The patch set is too large to go as a fix
at this stage in the cycle and is not a regression fix as this was never
right and so will have to wait for the next merge window. Srinivas assures
me that there are relatively few pieces of hardware out there and he has
had a number of people contact him to point out that the drivers did not
obey the ABI.  Hence hopefully the fallout of this, if any will be minor.
If we don't fix it now, it will only get worse going forward. There is no
sensible way of maintaining the incorrect ABI as it is simply returning
the wrong values through the standard interfaces.

Non IIO elements
* Introduce devm_kmemdup.  Does what it says on the tin.

New drivers:
* hid-sensors rotation devices (output as quaternion)
* Freescale MPL115A2 presure and temperature sensor.
* Melexis mlx90614 contactless infrared sensor.
* Freescale MMA8452Q 3-axis accelerometer.

New functionality:
* Addition of multiple element callback to allow for sysfs interfaces to access
  elements such as quaternions which have no useful meaning if all 4 elements
  are not presented together.  Other future usecases for this include
  rotation matrices.
* Support for multiple element buffer entries for exactly the same uses as
  the sysfs related elements described above.
* Quaternion support via the quaternion IIO modifier.
* TEMP_AMBIENT and TEMP_OBJECT modifiers to distinguish cases with thermopile
  devices.
* hid-sensors gain sysfs access to the sensor readings. Previously these
  drivers used the buffered interface only.  This change involves some
  additional hid-sensors core support to read poll values back from the devices
  to allow the drivers to know roughly how long to wait for a result when
  polling the sensor.  There is also an associated hid-sensors abi to allow
  the devices to be turned off between reads and powered up on demand.

Cleanups and fixes
* Hid sensors fix as described above. Result is to make the _scale and _offset
  attributes applicable in the same way as for all other IIO drivers.
* Some additional documentation - mostly covering stuff that graduated from
  staging without managing to take it's ABI docs with it.
* A series of little tidy ups to the exynos_adc driver that make the code
  nicer to read and improve handling of some corner cases.
* A tidy up to mag3110 (logical fix rather than a real one ;). Also enable
  user offset calibration for this device.
* Drop some left over IS_ERR() checks from ad799x that snuck through during
  the cleanup in the last IIO patch set.
* Fix a naming issue from clashing patches in ak8975 - note the clash only
  occured in the last IIO patch set, hence the fix needs to go through this
  tree.
* A format string missmatch fix in ad7280.c. Unlikely to have ever had an
  impact so not worth rushing through.

iio: hid-sensors: Pressure: Raw read support

Added support for raw reading of channel. If the sensor is powered
off, it will turn on for reading value.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Inclinometer 3D: Raw read support

Added support for raw reading of channel. If the sensor is powered
off, it will turn on for reading value.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Compass 3D: Raw read support

Added support for raw reading of channel. If the sensor is powered
off, it will turn on for reading value

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Proximity: Raw read support

Added support for raw reading of channel. If the sensor is powered
off, it will turn on for reading value.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: ALS: Raw read support

Added support for raw reading of channel. If the sensor is powered
off, it will turn on for reading value.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Gyro 3D: Raw read support

Added support for raw reading of channel. If the sensor is powered
off, it will turn on for reading value.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Accelerometer 3D: Raw read support

Added support for raw reading of channel. If the sensor is powered
off, it will turn on for reading value.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Add API to power on/off

Added an API to allow client drivers to turn ON and OFF sensors for
quick read. Added data_read as counting varaible instead of boolean,
so that sensor is powered off only when last user released it.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Pressure: adjust scale and offset

Using units and unit exponent to calculate scale which is compliant
to IIO ABI.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Inclinometer 3D: adjust scale and offset

Using units and unit exponent to calculate scale which is compliant
to IIO ABI.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Compass 3D: adjust scale and offset

Using units and unit exponent to calculate scale which is compliant
to IIO ABI.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: ALS: adjust scale and offset

Using units and unit exponent to calculate scale which is compliant
to IIO ABI.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Gyro 3D : adjust scale and offset

Using units and unit exponent to calculate scale which is compliant
to IIO ABI.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Accelerometer 3D: adjust scale and offset

Using units and unit exponent to calculate scale which is compliant
to IIO ABI.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Add api to get poll value

Added interface to get poll value in milli-seconds. This value is
changed by changing sampling frequency. This API allows clients
to wait for at least some poll milli seconds before reading a new sample.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: hid-sensors: Convert units and exponent

HID sensor hub specify a default unit and alternative units. This
along with unit exponent can be used adjust scale. This change
change HID sensor data units to IIO defined units for each
sensor type. So in this way user space can use a simply use:
"(data + offset) * scale" to get final result.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: rtl8188eu: Remove 'u8 *pbuf' from struct recv_buf

Instead of using pbuf to pass sbk data pointer to usb_fill_bulk_urb(),
we can use precvbuf->pskb->data to do that.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove rtl8188eu_init_recvbuf() function

rtl8188eu_init_recvbuf() function definition is empty now,
so remove it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'u32 ref_cnt' from struct recv_buf

Driver isn't making any use of value stored in variable ref_cnt.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'u32 len' from struct recv_buf

Remove unused variable 'u32 len'.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'alloc_sz' from struct recv_buf

Driver isn't making any use of value stored in alloc_sz variable.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'pallocated_buf' from struct recv_buf

pallocated_buf is not being used by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'irp_pending' from struct recv_buf

irp_pending is initialized to false inside rtw_os_recvbuf_resource_alloc()
and value of irq_pending never changed after that, so 'if (!precvbuf->irp_pending)'
inside rtw_os_read_port() function will be always true.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove pdata, phead, ptail and pend from struct recv_buf

Driver is not making use of value stored in removed variables.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'int transfer_len' from struct recv_buf

Driver is not making any use of value stored in this variable.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'dma_addr_t dma_transfer_addr' from struct recv_buf

Remove unused variable dma_transfer_addr.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'spinlock_t recvbuf_lock' from struct recv_buf

recvbuf_lock is initialized inside rtl8188eu_init_recv_priv() but never used.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'struct list_head list' from struct recv_buf

Users of 'struct list_head list' variable e.g. rtw_enqueue_recvbuf(),
rtw_enqueue_recvbuf_to_head() and rtw_dequeue_recvbuf() are
already removed.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_enqueue_recvbuf()

rtw_enqueue_recvbuf() is not being used by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_enqueue_recvbuf_to_head()

rtw_enqueue_recvbuf_to_head() is not being used by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_dequeue_recvbuf()

rtw_dequeue_recvbuf() is not being used by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8821ae: fixed defined-not-used warning

by cleaning up BT_AUTO_REPORT_ONLY_8192E_2ANT
(always set to 0, never used as constant)

halbtc8192e2ant_iswifi_status_changed was called only from the unused code

Signed-off-by: Jan Moskyto Matejka <mq@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix checkpatch braces warning

fix some code style related to the use of braces in a one statement block

Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192e: Erroneous return codes (types and values)

This function returns a bool, that is supposed to be false when something
goes wrong. It's assumed this way by its lone calling function (which is
SetRFPowerState8190(), line 1445 of rtl8192e/rtl8192e/r8192E_phy.c)

Despite of this, this procedure returns non-null enumerations values or
negative codes instead. This patch fixes this.

Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Use USB subsystem functions to check endpoint type

Use inline functions provided by USB subsystem to check endpoint type,
instead of inline functions implemented by driver to do the same.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove debugging messages from usb_dvobj_init()

Unnecessary debugging messages are removed from usb_dvobj_init().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: Clean up initializations of variables

Use a more common kernel coding style.

Signed-off-by: Thomas Vegas <thomas_75@safe-mail.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: Add blank line after declaration

Use a more common kernel coding style.

Signed-off-by: Thomas Vegas <thomas_75@safe-mail.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: serqt_usb2: Remove useless variable

Use a more common kernel coding style.

Signed-off-by: Thomas Vegas <thomas_75@safe-mail.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remove async parameter from resize_async_buffer()

The `struct comedi_async *async` parameter of `resize_async_buffer()` is
redundant as its value can be easily derived from the `struct
comedi_subdevice *s` parameter as `s->async`.  Remove the parameter.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remove redundant pointer dereference in comedi_poll()

`s->async->subdevice` in `comedi_poll()` points to the same `struct
comedi_subdevice` as `s`, so the double pointer reference is redundant.
Just use `s`.

(`s->async->subdevice` is initialized by
`__comedi_device_postconfig_async()` in
"drivers/staging/comedi/drivers.c" and doesn't change.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common: correct bound on counter mode

For the mode configured by the `INSN_CONFIG_SET_COUNTER_MODE` comedi
instruction for the counter subdevice channels supported by this module,
the upper bound should be `I8254_MODE5 | I8254_BCD` ((5 << 1) | 1)
rather than `I8254_MODE5 | I8254_BINARY` ((5 << 1) | 0).  Fix it.

Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: correct mode check for i8254_set_mode()

The upper bound check on the `mode` parameter of `i8254_set_mode()` and
`i8254_mm_set_mode()` is incorrect.  The `mode` parameter value consists
of a mode number in the range 0 to 5 in bits 3..1 {represented by the
constants `I8254_MODE0` (0 << 1) through to `I8254_MODE5` (2 << 1)} ORed
with a BCD/binary flag in bit 0 {represented by the constants
`I8254_BINARY` (0) and `I8254_BCD` (1)}.  The maximum allowed value
ought to be `I8254_MODE5 | I8254_BCD` ((5 << 1) | 1), but is currently
`I8254_MODE5 | I8254_BINARY` ((5 << 1) | 0).  Fix it.

None of the comedi drivers use `I8254_BCD` but some of the low-level
drivers allow user-space to configure the counter mode, so all legal
values ought to be allowed.  However, it's pretty unlikely anyone would
want to set the counters to count in BCD (binary coded decimal) so the
bug is not that significant.

Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: fix checkpatch warnings

Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16: clarify 8254 timer programming

Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16m1: clarify 8254 timer programming

Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>