scsi: fcoe: Fix few small typos in fcoe.c

This patch does a cleanup and fixes few small typos in fcoe.c

Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: lpfc: fix spelling mistake "entrys" -> "entries"

Trivial fix to spelling mistake in debugfs message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Remove an unused structure member

qla_tgt_cmd.free_work is not used by the qla2xxx driver. Hence remove
that member of struct qla_tgt_cmd.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Quinn Tran <quinn.tran@cavium.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: add null check before indirect pointer dereference

Add null check before indirectly dereferencing pointer task->lldd_task
in statement u32 tag = slot->idx;

Addresses-Coverity-ID: 1373843
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: mark PM functions as __maybe_unused

The newly added suspend/resume support causes harmless warnings when
CONFIG_PM is disabled:

smartpqi/smartpqi_init.c:5147:12: error: 'pqi_ctrl_wait_for_pending_io' defined but not used [-Werror=unused-function]
smartpqi/smartpqi_init.c:2019:13: error: 'pqi_wait_until_lun_reset_finished' defined but not used [-Werror=unused-function]
smartpqi/smartpqi_init.c:2013:13: error: 'pqi_wait_until_scan_finished' defined but not used [-Werror=unused-function]

We can avoid the warnings by removing the #ifdef around the handlers and
instead marking them as __maybe_unused, which will let gcc drop the
unused code silently.

Fixes: f44d210312a6 ("scsi: smartpqi: add suspend and resume support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: Avoid content leaks and casts

When copying attributes, the len argument was padded out and the
resulting memcpy() would copy beyond the end of the source buffer.
Avoid this, and use size_t for val_len to avoid all the casts.
Similarly, avoid source buffer casts and use void *.

Additionally enforces val_len can be represented by u16 and that the DMA
buffer was not overflowed. Fixes the size of mfa, which is not
FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN (but it will be padded up to 4). This
was noticed by the future CONFIG_FORTIFY_SOURCE checks.

Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: storvsc: remove unnecessary channel inbound lock

In storvsc driver, inbound messages do not go through inbound lock.  The
only effect of this lock was is to provide a barrier for connect and
remove logic.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: storvsc: use in place iterator function

In 4.12-rc1, new functions were added to support iterating over elements
in the vmbus event ring. This patch uses them to simplify the ring
buffer handling in virtual SCSI driver as well.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: csiostor: add support for Chelsio T6 adapters

Enable probe for T6 adapters, add code to flash T6 firmware and firmware
config file, use T6 specific macros.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libiscsi: use kvzalloc for iscsi_pool_init

iscsiadm session login can fail with the following error:

iscsiadm: Could not login to [iface: default, target: iqn.1986-03.com...
iscsiadm: initiator reported error (9 - internal error)

When /etc/iscsi/iscsid.conf sets node.session.cmds_max = 4096, it
results in 64K-sized kmallocs per session.  A system under fragmented
slab pressure may not have any 64K objects available and fail iscsiadm
session login. Even though memory objects of a smaller size are
available, the large order allocation ends up failing.

The kernel prints a warning and does dump_stack, like below:

iscsid: page allocation failure: order:4, mode:0xc0d0
CPU: 0 PID: 2456 Comm: iscsid Not tainted 4.1.12-61.1.28.el6uek.x86_64 #2
Call Trace:
 [<ffffffff816c6e40>] dump_stack+0x63/0x83
 [<ffffffff8118e58a>] warn_alloc_failed+0xea/0x140
 [<ffffffff81191df9>] __alloc_pages_slowpath+0x409/0x760
 [<ffffffff81192401>] __alloc_pages_nodemask+0x2b1/0x2d0
 [<ffffffffa048f6c0>] ? dev_attr_host_ipaddress+0x20/0xffffffffffffc722
 [<ffffffff811dc38f>] alloc_pages_current+0xaf/0x170
 [<ffffffff81192581>] alloc_kmem_pages+0x31/0xd0
 [<ffffffffa048f600>] ? iscsi_transport_group+0x20/0xffffffffffffc7e2
 [<ffffffff811ad738>] kmalloc_order+0x18/0x50
 [<ffffffff811ad7a4>] kmalloc_order_trace+0x34/0xe0
 [<ffffffff8146ee30>] ? transport_remove_classdev+0x70/0x70
 [<ffffffff811e843d>] __kmalloc+0x27d/0x2a0
 [<ffffffff810c8cbd>] ? complete_all+0x4d/0x60
 [<ffffffffa04af299>] iscsi_pool_init+0x69/0x160 [libiscsi]
 [<ffffffff81465d90>] ? device_initialize+0xb0/0xd0
 [<ffffffffa04af510>] iscsi_session_setup+0x180/0x2f4 [libiscsi]
 [<ffffffffa04c5a60>] ? iscsi_max_lun+0x20/0xfffffffffffffa9e [iscsi_tcp]
 [<ffffffffa04c531f>] iscsi_sw_tcp_session_create+0xcf/0x150 [iscsi_tcp]
 [<ffffffffa04c5a60>] ? iscsi_max_lun+0x20/0xfffffffffffffa9e [iscsi_tcp]
 [<ffffffffa048a633>] iscsi_if_create_session+0x33/0xd0
 [<ffffffffa04c5a60>] ? iscsi_max_lun+0x20/0xfffffffffffffa9e [iscsi_tcp]
 [<ffffffffa048abd8>] iscsi_if_recv_msg+0x508/0x8c0 [scsi_transport_iscsi]
 [<ffffffff811922eb>] ? __alloc_pages_nodemask+0x19b/0x2d0
 [<ffffffff811e6d69>] ? __kmalloc_node_track_caller+0x209/0x2c0
 [<ffffffffa048b00c>] iscsi_if_rx+0x7c/0x200 [scsi_transport_iscsi]
 [<ffffffff81623dc6>] netlink_unicast+0x126/0x1c0
 [<ffffffff8162468c>] netlink_sendmsg+0x36c/0x400
 [<ffffffff815d2fed>] sock_sendmsg+0x4d/0x60
 [<ffffffff815d596a>] ___sys_sendmsg+0x30a/0x330
 [<ffffffff811bc72c>] ? handle_pte_fault+0x20c/0x230
 [<ffffffff811bc90c>] ? __handle_mm_fault+0x1bc/0x330
 [<ffffffff811bcb32>] ? handle_mm_fault+0xb2/0x1a0
 [<ffffffff815d5b99>] __sys_sendmsg+0x49/0x90
 [<ffffffff815d5bf9>] SyS_sendmsg+0x19/0x20
 [<ffffffff816cbb2e>] system_call_fastpath+0x12/0x71

Use kvzalloc for iscsi_pool in iscsi_pool_init.

Signed-off-by: Kyle Fortin <kyle.fortin@oracle.com>
Tested-by: Kyle Fortin <kyle.fortin@oracle.com>
Reviewed-by: Joseph Slember <joe.slember@oracle.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Acked-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: bump driver version

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: remove writeq/readq function definitions

Instead of rewriting write/readq, use existing functions

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add module parameters

Add module parameters to disable heartbeat support and to disable
shutting down the controller when a controller is taken offline.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: cleanup list initialization

Better initialization of linked list heads.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add raid level show

Display the RAID level via sysfs

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: make ioaccel references consistent

 - make all references to RAID bypass consistent throughout driver.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: enhance device add and remove messages

Improved formatting of information displayed when devices
are added/removed from the system.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: update timeout on admin commands

Increase the timeout on admin commands from 3 seconds to 60
seconds and added a check for controller crash in the loop
where the driver polls for admin command completion.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: map more raid errors to SCSI errors

enhance mapping of RAID path errors to Linux SCSI host
error codes.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: cleanup controller branding

- Improve controller branding support.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: update rescan worker

improve support for taking controller offline.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: update device offline

- Improve handling of offline devices.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: correct aio error path

set the internal flag that causes I/O to be sent down the
RAID path when the AIO path is disabled

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add lockup action

add support for actions to take when controller goes offline.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: remove qdepth calculations for logical volumes

make the queue depth for LVs the same as the maximum
I/Os supported by the controller

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: enhance kdump

constrain resource usage during kdump to avoid kdump failures

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: change return value for LUN reset operations

change return value for controller offline to be consistent
with the rest of the driver.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add ptraid support

add support for PTRAID devices

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: update copyright

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: cleanup messages

- improve some error messages.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add new PCI device IDs

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: minor driver cleanup

 - remove debug code that is no longer necessary.
   - Some WARN_ON checks were removed because the driver continues
     to function when the conditions are met.
 - remove a MACRO that is no longer used.
 - remove unnecessary multi-line statements.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: correct BMIC identify physical drive

correct the BMIC Identify Physical Device structure
 - missing 2 fields

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: eliminate redundant error messages

eliminate redundant error message during initialization
if the controller has crashed.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: make pdev pointer names consistent

make all variable names for pointers to struct pci_dev consistent
throughout the driver.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add pqi_wait_for_completion_io

Add check for controller lockup during waits for synchronous
controller commands.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: correct bdma hw bug

add workaround for BDMA hardware bug that can cause
hw to read up to 12 SGL elements (192 bytes) beyond the
last element in the list. This fix avoids IOMMU violations

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add heartbeat check

check for controller lockups

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add suspend and resume support

add support for ACPI S3 (suspend) and S4 (hibernate)
system power states.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: enhance resets

- Block all I/O targeted at LUN reset device.
- Wait until all I/O targeted at LUN reset device has been
  consumed by the controller.
- Issue LUN reset request.
- Wait until all outstanding I/Os and LUN reset completion
  have been received by the host.
- Return to OS results of LUN reset request.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add supporting events

Only register for controller events that driver supports
cleanup event handling.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: ensure controller is in SIS mode at init

put in SIS mode during initialization.
support kexec/kdump

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: add in controller checkpoint for controller lockups.

tell smartpqi controller to generate a checkpoint for rare lockup
conditions.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: set pci completion timeout

add support for setting PCIe completion timeout.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: cleanup interrupt management

minor cleanup of interrupt initialization and tear-down.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: correct remove scsi devices

correct a problem caused by holding a spinlock during device deletion.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: bump driver version

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: remove abort handler

- simplify the driver
- there are a lot of quirky racy conditions not handled
- causes more aborts/resets when the number of commands to be aborted is
  large, such as in multi-path fail-overs.
- has been turned off in our internal driver since 8/31/2015

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: send ioaccel requests with 0 length down raid path

- Block I/O requests with 0 length transfers which go down the ioaccel
  path. This causes lockup issues down in the basecode.
- These issues have been fixed, but there are customers who are
  experiencing the issues when running older firmware.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: separate monitor events from rescan worker

create new worker thread to monitor controller events
 - both the rescan and event monitor workers can cause a rescan to occur
   however for multipath we have found that we need to respond faster
   than the normal scheduled rescan interval for path fail-overs.
 - getting controller events only involves reading a register, but the
   rescan worker can obtain an updated LUN list when there is a PTRAID
   device present.
 - move common code to a separate function.
advantages:
 - detect controller events more frequently.
 - leave rescan thread interval at 30 seconds.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: correct queue depth for externals

- queue depth assignment not in correct place, had no effect.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: cleanup reset handler

- mark device state sooner.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: correct resets on retried commands

- call scsi_done when the command completes.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: rescan later if reset in progress

- schedule another scan.
- mark current scan as completed.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: do not reset enclosures

Prevent enclosure resets.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.tell@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: update reset handler

Use the return from TUR as a check for the device state.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.tell@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: do not get enclosure info for external devices

external shelves do not support BMICs.

Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hpsa: update identify physical device structure

- align with latest spec.
- added __attribute((aligned(512)))

Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Update driver version to 50834

Update the driver version to 50834

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Remove reference to Series-9

Remove reference to Series-9 HBA and created arc ctrl check function.

Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Add reset debugging statements

Added info and error messages in controller reset function to log
information about the status of the IOP/SOFT reset.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Enable ctrl reset for both hba and arc

Make sure that IOP and SOFT reset are enabled for both for both arc and
hba1000 controllers.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Make sure ioctl returns on controller reset

Made sure that ioctl commands return in case of a controller reset.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Use correct function to get ctrl health

The command thread checks the ctrl health periodically before sending
updates to the controller. The function that it uses is aac_check_health
which does more than get the health status.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Rework aac_src_restart

Removed switch case and replaced with if mask checks. Moved KERNEL_PANIC
check to when bled is less than 0.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Rework SOFT reset code

Now the driver issues a soft reset and waits for the controller to be up
and running by periodically checking on the status of the controller
health registers. Also prevents ARC adapters from issuing soft reset if
IOP resets failed.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Add periodic checks to see IOP reset status

Added function that waits with a timeout for the ctrl to be up and running
after triggering an IOP reset. Also removed 30 sec sleep as it is not
needed.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Rework IOP reset

Reworked IOP reset to remove unneeded variable and created a helper
function to notify fw of an imminent IOP reset.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Using single reset mask for IOP reset

The driver can now trigger IOP reset with a single reset mask. Removed
code that retrieves a reset_mask from the firmware.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Print ctrl status before eh reset

Log the status of the controller before issuing a reset.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Log count info of scsi cmds before reset

Log the location of the scsi cmds before triggering a reset. This
information is useful for debugging.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Change wait time for fib completion

Change the completion wait time for the fibs in the reset and abort
callback from 2 minutes to 15 seconds.

2 minutes is too long for waiting for completion.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Remove reset support from check_health

Check health does not need to reset the ctrl but just return the
controller health status.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Set correct Queue Depth for HBA1000 RAW disks

The default queue depth for non NATIVE RAW disks is calculated from the
number of fibs and number of disks or a max of 256. This causes poor disk
IO performance.

The fix is to set default qd based on the type of disks
(SATA -32 and SAS -64)

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Added 32 and 64 queue depth for arc natives

The qd for ARC Native disks is calculated by dividing the max IO 1024
by the number of disks or 256 which ever is lower. This causes poor
disk IO performance.

The fix is set the qd based on the type of disk (SAS - 64 and SATA -
32).

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Fix DMAR issues with iommu=pt

The driver changed the DMA consistent map after consistent memory was
allocated, this invalidated the IOMMU identity mapping. The fix was to
make sure that we set the DMA consistent mask setting once depending on
the controller card.

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aacraid: Remove __GFP_DMA for raw srb memory

The raw srb commands do not requires memory that in the ZONE_DMA memory
space. For 32bit srb commands use GFP_DMA32 to limit the memory to 32bit
memory range (4GB).

Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Linux 4.12-rc5

Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull key subsystem fixes from James Morris:
 "Here are a bunch of fixes for Linux keyrings, including:

   - Fix up the refcount handling now that key structs use the
     refcount_t type and the refcount_t ops don't allow a 0->1
     transition.

   - Fix a potential NULL deref after error in x509_cert_parse().

   - Don't put data for the crypto algorithms to use on the stack.

   - Fix the handling of a null payload being passed to add_key().

   - Fix incorrect cleanup an uninitialised key_preparsed_payload in
     key_update().

   - Explicit sanitisation of potentially secure data before freeing.

   - Fixes for the Diffie-Helman code"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
  KEYS: fix refcount_inc() on zero
  KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP API
  crypto : asymmetric_keys : verify_pefile:zero memory content before freeing
  KEYS: DH: add __user annotations to keyctl_kdf_params
  KEYS: DH: ensure the KDF counter is properly aligned
  KEYS: DH: don't feed uninitialized "otherinfo" into KDF
  KEYS: DH: forbid using digest_null as the KDF hash
  KEYS: sanitize key structs before freeing
  KEYS: trusted: sanitize all key material
  KEYS: encrypted: sanitize all key material
  KEYS: user_defined: sanitize key payloads
  KEYS: sanitize add_key() and keyctl() key payloads
  KEYS: fix freeing uninitialized memory in key_update()
  KEYS: fix dereferencing NULL payload with nonzero length
  KEYS: encrypted: use constant-time HMAC comparison
  KEYS: encrypted: fix race causing incorrect HMAC calculations
  KEYS: encrypted: fix buffer overread in valid_master_desc()
  KEYS: encrypted: avoid encrypting/decrypting stack buffers
  KEYS: put keyring if install_session_keyring_to_cred() fails
  KEYS: Delete an error message for a failed memory allocation in get_derived_key()
  ...

compiler, clang: properly override 'inline' for clang

Commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused
static inline functions") just caused more warnings due to re-defining
the 'inline' macro.

So undef it before re-defining it, and also add the 'notrace' attribute
like the gcc version that this is overriding does.

Maybe this makes clang happier.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'random_for_linus_stable' of git://git./linux/kernel/git/tytso/random

Pull randomness fixes from Ted Ts'o:
 "Improve performance by using a lockless update mechanism suggested by
  Linus, and make sure we refresh per-CPU entropy returned get_random_*
  as soon as the CRNG is initialized"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: invalidate batched entropy after crng init
  random: use lockless method of accessing and updating f->reg_idx

Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix various bug fixes in ext4 caused by races and memory allocation
  failures"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix fdatasync(2) after extent manipulation operations
  ext4: fix data corruption for mmap writes
  ext4: fix data corruption with EXT4_GET_BLOCKS_ZERO
  ext4: fix quota charging for shared xattr blocks
  ext4: remove redundant check for encrypted file on dio write path
  ext4: remove unused d_name argument from ext4_search_dir() et al.
  ext4: fix off-by-one error when writing back pages before dio read
  ext4: fix off-by-one on max nr_pages in ext4_find_unwritten_pgoff()
  ext4: keep existing extra fields when inode expands
  ext4: handle the rest of ext4_mb_load_buddy() ENOMEM errors
  ext4: fix off-by-in in loop termination in ext4_find_unwritten_pgoff()
  ext4: fix SEEK_HOLE
  jbd2: preserve original nofs flag during journal restart
  ext4: clear lockdep subtype for quota files on quota off

Merge tag 'gpio-v4.12-2' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "A few overdue GPIO patches for the v4.12 kernel.

   - Fix debounce logic on the Aspeed platform.

   - Fix the "virtual gpio" things on the Intel Crystal Cove.

   - Fix the blink counter selection on the MVEBU platform"

* tag 'gpio-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mvebu: fix gpio bank registration when pwm is used
  gpio: mvebu: fix blink counter register selection
  MAINTAINERS: remove self from GPIO maintainers
  gpio: crystalcove: Do not write regular gpio registers for virtual GPIOs
  gpio: aspeed: Don't attempt to debounce if disabled

Merge tag 'char-misc-4.12-rc5' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes for 4.12-rc5. Nothing major here,
  just some small bugfixes found by people testing, and a MAINTAINERS
  file update for the genwqe driver.

  All have been in linux-next with no reported issues"

[ The cxl driver fix came in through the powerpc tree earlier ]

* tag 'char-misc-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  cxl: Avoid double free_irq() for psl,slice interrupts
  mei: make sysfs modalias format similar as uevent modalias
  drivers: char: mem: Fix wraparound check to allow mappings up to the end
  MAINTAINERS: Change maintainer of genwqe driver
  goldfish_pipe: use GFP_ATOMIC under spin lock
  firmware: vpd: do not leak kobjects
  firmware: vpd: avoid potential use-after-free when destroying section
  firmware: vpd: do not leave freed section attributes to the list

Merge tag 'staging-4.12-rc5' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
 "These are mostly all IIO driver fixes, resolving a number of tiny
  issues. There's also a ccree and lustre fix in here as well, both fix
  problems found in those codebases.

  All have been in linux-next with no reported issues"

* tag 'staging-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ccree: fix buffer copy
  staging/lustre/lov: remove set_fs() call from lov_getstripe()
  staging: ccree: add CRYPTO dependency
  iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function
  iio: light: ltr501 Fix interchanged als/ps register field
  iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's
  iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()
  iio: adc: max9611: Fix attribute measure unit
  iio: adc: ti_am335x_adc: allocating too much in probe
  iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
  iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
  iio: proximity: as3935: fix iio_trigger_poll issue
  iio: proximity: as3935: fix AS3935_INT mask
  iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
  iio: proximity: as3935: recalibrate RCO after resume

Merge tag 'usb-4.12-rc5' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 4.12-rc5

  They are for some reported issues in the chipidea and gadget drivers.
  Nothing major. All have been in linux-next for a while with no
  reported issues"

* tag 'usb-4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc: renesas_usb3: Fix PN_INT_ENA disabling timing
  usb: gadget: udc: renesas_usb3: lock for PN_ registers access
  usb: gadget: udc: renesas_usb3: fix deadlock by spinlock
  usb: gadget: udc: renesas_usb3: fix pm_runtime functions calling
  usb: gadget: f_mass_storage: Serialize wake and sleep execution
  usb: dwc2: add support for the DWC2 controller on Meson8 SoCs
  phy: qualcomm: phy-qcom-qmp: fix application of sizeof to pointer
  usb: musb: dsps: keep VBUS on for host-only mode
  usb: chipidea: core: check before accessing ci_role in ci_role_show
  usb: chipidea: debug: check before accessing ci_role
  phy: qcom-qmp: fix return value check in qcom_qmp_phy_create()
  usb: chipidea: udc: fix NULL pointer dereference if udc_start failed
  usb: chipidea: imx: Do not access CLKONOFF on i.MX51

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is a set of user visible fixes (excepting one format string
  change).

  Four of the qla2xxx fixes only affect the firmware dump path, but it's
  still important to the enterprise. The rest are various NULL pointer
  crash conditions or outright driver hangs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: cxgb4i: libcxgbi: in error case RST tcp conn
  scsi: scsi_debug: Avoid PI being disabled when TPGS is enabled
  scsi: qla2xxx: Fix extraneous ref on sp's after adapter break
  scsi: lpfc: prevent potential null pointer dereference
  scsi: lpfc: Avoid NULL pointer dereference in lpfc_els_abort()
  scsi: lpfc: nvmet_fc: fix format string
  scsi: qla2xxx: Fix crash due to NULL pointer dereference of ctx
  scsi: qla2xxx: Fix mailbox pointer error in fwdump capture
  scsi: qla2xxx: Set bit 15 for DIAG_ECHO_TEST MBC
  scsi: qla2xxx: Modify T262 FW dump template to specify same start/end to debug customer issues
  scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue
  scsi: qla2xxx: Fix NULL pointer access due to redundant fc_host_port_name call
  scsi: qla2xxx: Fix recursive loop during target mode configuration for ISP25XX leaving system unresponsive
  scsi: bnx2fc: fix race condition in bnx2fc_get_host_stats()
  scsi: qla2xxx: don't disable a not previously enabled PCI device

Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fix from Dan Williams:
 "We expanded the device-dax fs type in 4.12 to be a generic provider of
  a struct dax_device with an embedded inode. However, Sasha found some
  basic negative testing was not run to verify that this fs cleanly
  handles being mounted directly.

  Note that the fresh rebase was done to remove an unnecessary Cc:
  <stable> tag, but this commit otherwise had a build success
  notification from the 0day robot."

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix 'dax' device filesystem inode destruction crash

Merge tag 'hexagon-for-linus-v4.12-rc5' of git://git./linux/kernel/git/groeck/linux-staging

Pull hexagon fix from Guenter Roeck:
 "This fixes a build error seen when building hexagon images.

  Richard sent me an Ack, but didn't reply when asked if he wants me to
  send the patch to you directly, so I figured I'd just do it"

* tag 'hexagon-for-linus-v4.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hexagon: Use raw_copy_to_user

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "Bug fixes (ARM, s390, x86)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: async_pf: avoid async pf injection when in guest mode
  KVM: cpuid: Fix read/write out-of-bounds vulnerability in cpuid emulation
  arm: KVM: Allow unaligned accesses at HYP
  arm64: KVM: Allow unaligned accesses at EL2
  arm64: KVM: Preserve RES1 bits in SCTLR_EL2
  KVM: arm/arm64: Handle possible NULL stage2 pud when ageing pages
  KVM: nVMX: Fix exception injection
  kvm: async_pf: fix rcu_irq_enter() with irqs enabled
  KVM: arm/arm64: vgic-v3: Fix nr_pre_bits bitfield extraction
  KVM: s390: fix ais handling vs cpu model
  KVM: arm/arm64: Fix isues with GICv2 on GICv3 migration

KVM: async_pf: avoid async pf injection when in guest mode

 INFO: task gnome-terminal-:1734 blocked for more than 120 seconds.
       Not tainted 4.12.0-rc4+ #8
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 gnome-terminal- D    0  1734   1015 0x00000000
 Call Trace:
  __schedule+0x3cd/0xb30
  schedule+0x40/0x90
  kvm_async_pf_task_wait+0x1cc/0x270
  ? __vfs_read+0x37/0x150
  ? prepare_to_swait+0x22/0x70
  do_async_page_fault+0x77/0xb0
  ? do_async_page_fault+0x77/0xb0
  async_page_fault+0x28/0x30

This is triggered by running both win7 and win2016 on L1 KVM simultaneously,
and then gives stress to memory on L1, I can observed this hang on L1 when
at least ~70% swap area is occupied on L0.

This is due to async pf was injected to L2 which should be injected to L1,
L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host
actually), and L1 guest starts accumulating tasks stuck in D state in
kvm_async_pf_task_wait() since missing PAGE_READY async_pfs.

This patch fixes the hang by doing async pf when executing L1 guest.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hexagon: Use raw_copy_to_user

Commit ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") replaced
__copy_to_user_hexagon() with raw_copy_to_user(), but did not catch
all callers, resulting in the following build error.

arch/hexagon/mm/uaccess.c: In function '__clear_user_hexagon':
arch/hexagon/mm/uaccess.c:40:3: error:
implicit declaration of function '__copy_to_user_hexagon'

Fixes: ac4691fac8ad ("hexagon: switch to RAW_COPY_USER")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull UFS fixes from Al Viro:
 "This is just the obvious backport fodder; I'm pretty sure that there
  will be more - definitely so wrt performance and quite possibly
  correctness as well"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ufs: we need to sync inode before freeing it
  excessive checks in ufs_write_failed() and ufs_evict_inode()
  ufs_getfrag_block(): we only grab ->truncate_mutex on block creation path
  ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()
  ufs: set correct ->s_maxsize
  ufs: restore maintaining ->i_blocks
  fix ufs_isblockset()
  ufs: restore proper tail allocation

Merge branch 'for-linus-4.12' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "Some fixes that Dave Sterba collected.

  We've been hitting an early enospc problem on production machines that
  Omar tracked down to an old int->u64 mistake. I waited a bit on this
  pull to make sure it was really the problem from production, but it's
  on ~2100 hosts now and I think we're good.

  Omar also noticed a commit in the queue would make new early ENOSPC
  problems. I pulled that out for now, which is why the top three
  commits are younger than the rest.

  Otherwise these are all fixes, some explaining very old bugs that
  we've been poking at for a while"

* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix delalloc accounting leak caused by u32 overflow
  Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_io
  btrfs: tree-log.c: Wrong printk information about namelen
  btrfs: fix race with relocation recovery and fs_root setup
  btrfs: fix memory leak in update_space_info failure path
  btrfs: use correct types for page indices in btrfs_page_exists_in_range
  btrfs: fix incorrect error return ret being passed to mapping_set_error
  btrfs: Make flush bios explicitely sync
  btrfs: fiemap: Cache and merge fiemap extent before submit it to user

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: a Geode fix plus a microcode loader fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/intel: Clear patch pointer before jettisoning the initrd
  x86/cpu/cyrix: Add alternative Device ID of Geode GX1 SoC

Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull CPU hotplug fix from Ingo Molnar:
 "An error handling corner case fix"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Drop the device lock on error

Merge branch 'rcu-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull RCU fixes from Ingo Molnar:
 "Fix an SRCU bug affecting KVM IRQ injection"

* 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  srcu: Allow use of Classic SRCU from both process and interrupt context
  srcu: Allow use of Tiny/Tree SRCU from both process and interrupt context

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "This is mostly tooling fixes, plus an instruction pointer filtering
  fix.

  It's more fixes than usual - Arnaldo got back from a longer vacation
  and there was a backlog"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  perf symbols: Kill dso__build_id_is_kmod()
  perf symbols: Keep DSO->symtab_type after decompress
  perf tests: Decompress kernel module before objdump
  perf tools: Consolidate error path in __open_dso()
  perf tools: Decompress kernel module when reading DSO data
  perf annotate: Use dso__decompress_kmodule_path()
  perf tools: Introduce dso__decompress_kmodule_{fd,path}
  perf tools: Fix a memory leak in __open_dso()
  perf annotate: Fix symbolic link of build-id cache
  perf/core: Drop kernel samples even though :u is specified
  perf script python: Remove dups in documentation examples
  perf script python: Updated trace_unhandled() signature
  perf script python: Fix wrong code snippets in documentation
  perf script: Fix documentation errors
  perf script: Fix outdated comment for perf-trace-python
  perf probe: Fix examples section of documentation
  perf report: Ensure the perf DSO mapping matches what libdw sees
  perf report: Include partial stacks unwound with libdw
  perf annotate: Add missing powerpc triplet
  perf test: Disable breakpoint signal tests for powerpc
  ...

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fix from Ingo Molnar:
 "A boot crash fix for certain systems where the kernel would trust a
  piece of firmware data it should not have"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Fix boot panic because of invalid BGRT image address

ufs: we need to sync inode before freeing it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>