GitHub/moto-9609/android_kernel_motorola_exynos9610.git
8 years agomwifiex: Command 7 handling for USB chipsets
Ganapathi Bhat [Mon, 12 Sep 2016 13:25:27 +0000 (18:55 +0530)]
mwifiex: Command 7 handling for USB chipsets

Firmware image for newer USB chipsets starts with a command 7 block
(special command). It doesn't contain data length field. This patch adds
necessary handling.

Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortlwifi: rtl818x: constify local structures
Julia Lawall [Sun, 11 Sep 2016 13:06:03 +0000 (15:06 +0200)]
rtlwifi: rtl818x: constify local structures

For structure types defined in the same file or local header files, find
top-level static structure declarations that have the following
properties:
1. Never reassigned.
2. Address never taken
3. Not passed to a top-level macro call
4. No pointer or array-typed field passed to a function or stored in a
variable.
Declare structures having all of these properties as const.

Done using Coccinelle.
Based on a suggestion by Joe Perches <joe@perches.com>.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agoiwlegacy: constify local structures
Julia Lawall [Sun, 11 Sep 2016 13:05:50 +0000 (15:05 +0200)]
iwlegacy: constify local structures

For structure types defined in the same file or local header files, find
top-level static structure declarations that have the following
properties:
1. Never reassigned.
2. Address never taken
3. Not passed to a top-level macro call
4. No pointer or array-typed field passed to a function or stored in a
variable.
Declare structures having all of these properties as const.

Done using Coccinelle.
Based on a suggestion by Joe Perches <joe@perches.com>.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agoath: constify local structures
Julia Lawall [Sun, 11 Sep 2016 13:05:48 +0000 (15:05 +0200)]
ath: constify local structures

For structure types defined in the same file or local header files, find
top-level static structure declarations that have the following
properties:
1. Never reassigned.
2. Address never taken
3. Not passed to a top-level macro call
4. No pointer or array-typed field passed to a function or stored in a
variable.
Declare structures having all of these properties as const.

Done using Coccinelle.
Based on a suggestion by Joe Perches <joe@perches.com>.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: fix spelling mistake "firmare" -> "firmware"
Colin Ian King [Fri, 9 Sep 2016 18:01:25 +0000 (14:01 -0400)]
rtl8xxxu: fix spelling mistake "firmare" -> "firmware"

Trivial fix to spelling mistakes in dev_dbg message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Reset device on module unload if still attached
Jes Sorensen [Fri, 9 Sep 2016 18:01:24 +0000 (14:01 -0400)]
rtl8xxxu: Reset device on module unload if still attached

If the USB dongle is still attached, reset it on module unload to
avoid scans failing when reloading the driver.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: correction in Rx STBC field of htcapinfo
Amitkumar Karwar [Fri, 9 Sep 2016 14:56:19 +0000 (20:26 +0530)]
mwifiex: correction in Rx STBC field of htcapinfo

Currently Rx STBC in assoc request frame is advertised as 3. It should
be 2, as our chipsets support two spatial streams.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: handle error if IRQ request fails in mwifiex_sdio_of()
Amitkumar Karwar [Fri, 9 Sep 2016 10:57:58 +0000 (16:27 +0530)]
mwifiex: handle error if IRQ request fails in mwifiex_sdio_of()

When this failure occurs, we will clear card->plt_wake_cfg so that
device would initialize without wake up on external interrupt feature.
This feature specific code in suspend and resume handlers will be
skipped.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agoMerge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
Kalle Valo [Wed, 14 Sep 2016 16:34:50 +0000 (19:34 +0300)]
Merge ath-next from git://git./linux/kernel/git/kvalo/ath.git

ath.git patches for 4.9. Major changes:

ath10k

* add nl80211 testmode support for 10.4 firmware
* hide kernel addresses from logs using %pK format specifier
* implement NAPI support
* enable peer stats by default

ath9k

* use ieee80211_tx_status_noskb where possible

wil6210

* extract firmware capabilities from the firmware file

ath6kl

* enable firmware crash dumps on the AR6004

ath-current is also merged to fix a conflict in ath10k.

8 years agoath10k: remove 4-addr padding related hw_param configuration
Vasanthakumar Thiagarajan [Fri, 9 Sep 2016 14:25:36 +0000 (17:25 +0300)]
ath10k: remove 4-addr padding related hw_param configuration

hw_4addr_pad was added to handle different types of padding
in 4-address rx frame. But this padding is not very specific
to 4-address, it can happen even with three address + ethernet
decap mode. Since the  padding information can be obtained
through Rx desc for QCA99X0 and newer chips, this hw_param
is not needed any more.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: properly remove padding from the start of rx payload
Vasanthakumar Thiagarajan [Fri, 9 Sep 2016 14:25:29 +0000 (17:25 +0300)]
ath10k: properly remove padding from the start of rx payload

In QCA99X0 (QCA99X0, QCA9984, QCA9888 and QCA4019) family chips,
hw adds padding at the begining of the rx payload to make L3
header 4-byte aligned. In the chips doing this type of padding,
the number of bytes padded will be indicated through msdu_end:info1.
Define a hw_rx_desc_ops wrapper to retrieve the number of padded
bytes and use this while doing undecap. This should fix padding
related issues with ethernt decap format with QCA99X0, QCA9984,
QCA9888 and QCA4019 hw.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
[Rename operations to hw_ops for other purposes]
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: add provision for Rx descriptor abstraction
Vasanthakumar Thiagarajan [Fri, 9 Sep 2016 14:25:22 +0000 (17:25 +0300)]
ath10k: add provision for Rx descriptor abstraction

There are slight differences in Rx hw descriptor information
among different chips. So far driver does not use those new
information for any functionalities, but there is one important
information which is available from QCA99X0 onwards to indicate
the number of bytes that hw padded at the begining of the rx
payload and this information is needed to undecap the rx
packet. Add an abstraction for Rx desc to make use of the
new desc information available. The callback that this patch
defines to retrieve the padding bytes will be used in follow-up
patch.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
[Rename operations to hw_ops for other purposes]
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: move ath10k_hw_params definition to hw.h
Vasanthakumar Thiagarajan [Fri, 9 Sep 2016 14:25:13 +0000 (17:25 +0300)]
ath10k: move ath10k_hw_params definition to hw.h

This is to prepare for rx descriptor abstraction where we'll
be dereferencing ath10k_hw_params member in hw.h. Moreover
hw.h looks more suitable to house ath10k_hw_params definition
than core.h

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: improve logging message
Ben Greear [Fri, 19 Aug 2016 01:26:35 +0000 (18:26 -0700)]
ath10k: improve logging message

Helps to know the sta pointer.

Signed-off-by: Ben Greear <greearb@candelatech.com>
[kvalo@qca.qualcomm.com: add %pK and remove the colon]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: enable peer stats by default
Thomas Pedersen [Tue, 6 Sep 2016 19:05:28 +0000 (12:05 -0700)]
ath10k: enable peer stats by default

IFTYPE_MESH_POINT need to rely on these for accurate path
selection metrics. Other modes will probably also find
them useful. Enabling peer stats has the side effect of
reducing max number of STAs from 128 to 118. There should
be negligible performance impact.

If users really need 128 STAs and don't mind losing out on
peer stats, they can still disable them:

echo 0 > debugfs/ieee80211/phyn/ath10k/peer_stats

Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: remove unused variable ar_pci
Chaehyun Lim [Mon, 5 Sep 2016 13:38:02 +0000 (22:38 +0900)]
ath10k: remove unused variable ar_pci

Trival fix to remove unused variable ar_pci in ath10k_pci_tx_pipe_cleanup
when building with W=1:
drivers/net/wireless/ath/ath10k/pci.c:1696:21: warning: variable
'ar_pci' set but not used [-Wunused-but-set-variable]

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: fix memory leak on caldata on error exit path
Colin Ian King [Sat, 3 Sep 2016 16:38:19 +0000 (17:38 +0100)]
ath10k: fix memory leak on caldata on error exit path

caldata is not being free'd on the error exit path, causing
a memory leak and data definitely should not be freed. Free
caldata instead of data.

Thanks to Kalle Valo for spotting that data should not be
free'd.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoMerge branch 'ath-current' into ath-next
Kalle Valo [Fri, 9 Sep 2016 12:19:40 +0000 (15:19 +0300)]
Merge branch 'ath-current' into ath-next

Commit 3c97f5de1f28 ("ath10k: implement NAPI support") conflicts with
ath-current. To avoid any merge problems merge ath-current to ath-next already now.

Conflicts:
drivers/net/wireless/ath/ath10k/htt_rx.c

8 years agocarl9170: Fix wrong completion usage
Daniel Wagner [Thu, 18 Aug 2016 13:12:05 +0000 (15:12 +0200)]
carl9170: Fix wrong completion usage

carl9170_usb_stop() is used from several places to flush and cleanup any
pending work. The normal pattern is to send a request and wait for the
irq handler to call complete(). The completion is not reinitialized
during normal operation and as the old comment indicates it is important
to keep calls to wait_for_completion_timeout() and complete() balanced.

Calling complete_all() brings this equilibirum out of balance and needs
to be fixed by a reinit_completion(). But that opens a small race
window. It is possible that the sequence of complete_all(),
reinit_completion() is faster than the wait_for_completion_timeout() can
do its work. The wake up is not lost but the done counter test is after
reinit_completion() has been executed. The only reason we don't see
carl9170_exec_cmd() hang forever is we use the timeout version of
wait_for_copletion().

Let's fix this by reinitializing the completion (that is just setting
done counter to 0) just before we send out an request. Now,
carl9170_usb_stop() can be sure a complete() call is enough to make
progess since there is only one waiter at max. This is a common pattern
also seen in various drivers which use completion.

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath6kl: Allow the radio to report 0 dbm txpower without timing out
Eric Bentley [Tue, 30 Aug 2016 06:16:19 +0000 (02:16 -0400)]
ath6kl: Allow the radio to report 0 dbm txpower without timing out

The ath6kl driver attempts to get the txpower value from the radio by first
clearing the existing stored value and then watching the value to become
non-zero.

APs allow setting client power to values from -127..127, but this radio
is not capable of setting values less then 0 and so will report txpower
as 0dbm for both negative and 0 client power values.

When the radio has txpower set to 0dbm txpower (equivalent to 1mw) the
ath6kl_cfg80211_get_txpower() function will remain in the
wait_event_interruptible_timeout() loop waiting for the value to be
non-zero, and will eventually timeout. This results in a 5 second delay in
response. However, the correct value of zero is eventually returned.

The 6004 defaults to 63dbm which is then limited by regulatory and
hardware limits with max of 18dbm (6003 max is 16dbm), therefore we can
use values larger then these to be able to determine when the value has
been updated.

To correct the issue, set the value to a nonsensical value (255) and wait
for it to change to the valid value.

Tested on both 6003 and 6004 based radios.  Return value of zero is
correctly returned in an expected amount of time (similar to when
returning non-zero values) when AP client power is set to both 0 and
negative values.

Signed-off-by: Eric Bentley <eric.bentley@lairdtech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath6kl: enable firmware crash dumps on the AR6004
Dan Kephart [Wed, 3 Aug 2016 20:43:43 +0000 (16:43 -0400)]
ath6kl: enable firmware crash dumps on the AR6004

The firmware crash dumps on the 6004 are the same as the 6003. Remove the
statement guarding it from dumping on the 6004.  Renamed the
REG_DUMP_COUNT_AR6003 to reflect support on both chips.

Signed-off-by: Dan Kephart <dan.kephart@lairdtech.com>
Reviewed-by: Steve deRosier <steve.derosier@lairdtech.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath9k: remove repetitions of mask array size
Bob Copeland [Sat, 16 Apr 2016 14:54:37 +0000 (10:54 -0400)]
ath9k: remove repetitions of mask array size

The constant "123", which is the number of elements in
mask_m / mask_p, is repeated several times in this function.

Replace memsets with array initialization, and replace a loop
conditional with ARRAY_SIZE() so that we don't repeat ourselves.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: fix reporting channel survey data
Ashok Raj Nagarajan [Fri, 2 Sep 2016 05:29:53 +0000 (10:59 +0530)]
ath10k: fix reporting channel survey data

When user requests for survey dump data, driver is providing wrong survey
information. This information we sent is the survey data that we have
collected during previous user request.

This issue occurs because we request survey dump for wrong channel. With
this change, we correctly display the correct and current survey
information to userspace.

Fixes: fa7937e3d5c2 ("ath10k: update bss channel survey information")
Signed-off-by: Ashok Raj Nagarajan <arnagara@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: remove unnecessary error code assignment
Mohammed Shafi Shajakhan [Thu, 1 Sep 2016 16:13:36 +0000 (21:43 +0530)]
ath10k: remove unnecessary error code assignment

The error assigned does not seems to be used anywhere,
fixes nothing just a small cleanup

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath9k: improve powersave filter handling
Felix Fietkau [Fri, 2 Sep 2016 16:46:13 +0000 (19:46 +0300)]
ath9k: improve powersave filter handling

For non-aggregated frames, ath9k was leaving handling of powersave
filtered packets to mac80211. This can be too slow if the intermediate
queue is already filled with packets and mac80211 does not immediately
send a new packet via drv_tx().

Improve response time with filtered frames by triggering clearing the
powersave filter internally.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath9k: use ieee80211_tx_status_noskb where possible
Felix Fietkau [Fri, 2 Sep 2016 16:46:12 +0000 (19:46 +0300)]
ath9k: use ieee80211_tx_status_noskb where possible

It removes the need for undoing the padding changes to skb->data and it
improves performance by eliminating one tx status lookup per MPDU in the
status path. It is also useful for preparing a follow-up fix to better
handle powersave filtering.

A side effect is that these counters, available via debugfs, become now invalid:

* dot11TransmittedFragmentCount
* dot11FrameDuplicateCount,
* dot11ReceivedFragmentCount
* dot11MulticastReceivedFrameCount

Signed-off-by: Felix Fietkau <nbd@nbd.name>
[kvalo@qca.qualcomm.com: add a note about counters, thanks to Zefir Kurtisi]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: fix throughput regression in multi client mode
Rajkumar Manoharan [Fri, 2 Sep 2016 16:46:10 +0000 (19:46 +0300)]
ath10k: fix throughput regression in multi client mode

commit 7a0adc83f34d ("ath10k: improve tx scheduling") is causing
severe throughput drop in multi client mode. This issue is originally
reported in veriwave setup with 50 clients with TCP downlink traffic.
While increasing number of clients, the average throughput drops
gradually. With 50 clients, the combined peak throughput is decreased
to 98 Mbps whereas reverting given commit restored it to 550 Mbps.

Processing txqs for every tx completion is causing overhead. Ideally for
management frame tx completion, pending txqs processing can be avoided.
The change partly reverts the commit "ath10k: improve tx scheduling".
Processing pending txqs after all skbs tx completion will yeild enough
room to burst tx frames.

Fixes: 7a0adc83f34d ("ath10k: improve tx scheduling")
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: implement NAPI support
Rajkumar Manoharan [Fri, 2 Sep 2016 16:46:09 +0000 (19:46 +0300)]
ath10k: implement NAPI support

Add NAPI support for rx and tx completion. NAPI poll is scheduled
from interrupt handler. The design is as below

 - on interrupt
     - schedule napi and mask interrupts
 - on poll
   - process all pipes (no actual Tx/Rx)
   - process Rx within budget
   - if quota exceeds budget reschedule napi poll by returning budget
   - process Tx completions and update budget if necessary
   - process Tx fetch indications (pull-push)
   - push any other pending Tx (if possible)
   - before resched or napi completion replenish htt rx ring buffer
   - if work done < budget, complete napi poll and unmask interrupts

This change also get rid of two tasklets (intr_tq and txrx_compl_task).

Measured peak throughput with NAPI on IPQ4019 platform in controlled
environment. No noticeable reduction in throughput is seen and also
observed improvements in CPU usage. Approx. 15% CPU usage got reduced
in UDP uplink case.

DL: AP DUT Tx
UL: AP DUT Rx

IPQ4019 (avg. cpu usage %)

========
                TOT              +NAPI
              ===========      =============
TCP DL       644 Mbps (42%)    645 Mbps (36%)
TCP UL       673 Mbps (30%)    675 Mbps (26%)
UDP DL       682 Mbps (49%)    680 Mbps (49%)
UDP UL       720 Mbps (28%)    717 Mbps (11%)

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agomwifiex: PCIe8997 chip specific handling
Amitkumar Karwar [Fri, 29 Jul 2016 10:38:51 +0000 (16:08 +0530)]
mwifiex: PCIe8997 chip specific handling

The patch corrects the revision id register and uses it along with
magic value and chip version registers to download appropriate firmware
image.

PCIe8997 Z chipset variant code has been removed, as it won't be used in
production.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: scan: Simplify code
Christophe Jaillet [Wed, 31 Aug 2016 11:50:59 +0000 (13:50 +0200)]
mwifiex: scan: Simplify code

This patch:
   - improves code layout
   - removes a useless memset(0) for some memory allocated with kzalloc
   - removes a useless if. We know that 'if (chan_band_tlv)' will succeed
     because it has been tested a few lines above

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: add PCIe function level reset support
Amitkumar Karwar [Tue, 26 Jul 2016 14:01:44 +0000 (19:31 +0530)]
mwifiex: add PCIe function level reset support

This patch implements pre and post FLR handlers to support PCIe FLR
functionality. Software cleanup is performed in pre-FLR whereas
firmware is downloaded and software is re-initialised in
post-FLR handler.

Following command triggers FLR.
echo "1" > /sys/bus/pci/devices/$NUMBER/reset

This feature can be used as a recovery mechanism when firmware gets
hang.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agobrcmfmac: sdio: shorten retry loop in brcmf_sdio_kso_control()
Arend Van Spriel [Mon, 5 Sep 2016 10:42:13 +0000 (11:42 +0100)]
brcmfmac: sdio: shorten retry loop in brcmf_sdio_kso_control()

In brcmf_sdio_kso_control() there is a retry loop as hardware may take
time to settle. However, when the call to brcmf_sdiod_regrb() returns
an error it is due to SDIO access failure and it makes no sense to wait
for hardware to settle. This patch aborts the loop after a number of
subsequent access errors.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agobrcmfmac: add support for bcm4339 chip with modalias sdio:c00v02D0d4339
Arend Van Spriel [Mon, 5 Sep 2016 10:42:12 +0000 (11:42 +0100)]
brcmfmac: add support for bcm4339 chip with modalias sdio:c00v02D0d4339

The driver already supports the bcm4339 chipset but only for the variant
that shares the same modalias as the bcm4335, ie. sdio:c00v02D0d4335.
It turns out that there are also bcm4339 devices out there that have a
more distiguishable modalias sdio:c00v02D0d4339.

Reported-by: Steve deRosier <derosier@gmail.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomt7601u: use linux/bitfield.h
Jakub Kicinski [Wed, 31 Aug 2016 11:46:47 +0000 (12:46 +0100)]
mt7601u: use linux/bitfield.h

Use the newly added linux/bitfield.h.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomt7601u: remove unnecessary include
Jakub Kicinski [Wed, 31 Aug 2016 11:46:46 +0000 (12:46 +0100)]
mt7601u: remove unnecessary include

There is no need to include linux/version.h in a in-tree
driver.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomt7601u: remove redefinition of GENMASK
Jakub Kicinski [Wed, 31 Aug 2016 11:46:45 +0000 (12:46 +0100)]
mt7601u: remove redefinition of GENMASK

Remove redefinition of GENMASK which should not be there
in the upstream version of the code.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agoadd basic register-field manipulation macros
Jakub Kicinski [Wed, 31 Aug 2016 11:46:44 +0000 (12:46 +0100)]
add basic register-field manipulation macros

Common approach to accessing register fields is to define
structures or sets of macros containing mask and shift pair.
Operations on the register are then performed as follows:

 field = (reg >> shift) & mask;

 reg &= ~(mask << shift);
 reg |= (field & mask) << shift;

Defining shift and mask separately is tedious.  Ivo van Doorn
came up with an idea of computing them at compilation time
based on a single shifted mask (later refined by Felix) which
can be used like this:

 #define REG_FIELD 0x000ff000

 field = FIELD_GET(REG_FIELD, reg);

 reg &= ~REG_FIELD;
 reg |= FIELD_PREP(REG_FIELD, field);

FIELD_{GET,PREP} macros take care of finding out what the
appropriate shift is based on compilation time ffs operation.

GENMASK can be used to define registers (which is usually
less error-prone and easier to match with datasheets).

This approach is the most convenient I've seen so to limit code
multiplication let's move the macros to a global header file.
Attempts to use static inlines instead of macros failed due
to false positive triggering of BUILD_BUG_ON()s, especially with
GCC < 6.0.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: add cfg80211 testmode support
Xinming Hu [Fri, 2 Sep 2016 07:35:07 +0000 (13:05 +0530)]
mwifiex: add cfg80211 testmode support

This patch adds cfg80211 testmode support so that userspace tools can
download necessary commands to firmware during manufacturing mode tests.

Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: add manufacturing mode support
Xinming Hu [Fri, 2 Sep 2016 07:35:06 +0000 (13:05 +0530)]
mwifiex: add manufacturing mode support

By default normal mode is chosen when driver is loaded. This
patch adds a provision to choose manufacturing mode via module
parameters.

Below command loads driver in manufacturing mode
insmod mwifiex.ko mfg_mode=1.

Tested-by: chunfan chen <jeffc@marvell.com>
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agobcma: use of_dma_configure() to set initial dma mask
Arnd Bergmann [Thu, 17 Mar 2016 09:39:17 +0000 (10:39 +0100)]
bcma: use of_dma_configure() to set initial dma mask

While fixing another bug, I noticed that bcma manually sets up
a dma_mask pointer for its child devices. We have a generic
helper for that now, which should be able to cope better with
any variations that might be needed to deal with cache coherency,
unusual DMA address offsets, iommus, or limited DMA masks, none
of which are currently handled here.

This changes the core to use the of_dma_configure(), like
we do for platform devices that are probed directly from
DT.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agoath9k: bring back direction setting in ath9k_{start_stop}
Giedrius Statkevičius [Thu, 1 Sep 2016 17:47:02 +0000 (20:47 +0300)]
ath9k: bring back direction setting in ath9k_{start_stop}

A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup
led_pin initial") that broken the WLAN status led on my laptop with
AR9287 after suspending and resuming.

Steps to reproduce:
* Suspend (laptop)
* Resume (laptop)
* Observe that the WLAN led no longer turns ON/OFF depending on the
  status and is always red

Even though for my case it only needs to be set to OUT in ath9k_start
but for consistency bring back the IN direction setting as well.

Fixes: 79d4db1214a0 ("ath9k: cleanup led_pin initial")
Cc: Miaoqing Pan <miaoqing@codeaurora.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
[kvalo@qca.qualcomm.com: improve commit log]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agortlwifi/rtl8192de: Fix print format string
Oleg Drokin [Sat, 27 Aug 2016 03:12:23 +0000 (23:12 -0400)]
rtlwifi/rtl8192de: Fix print format string

%ul was likely meant as %lu to print an unsigned long,
not an unsigned with a letter l at the end.
But in fact the value printed is u32 anyway, so just drop
the l completely.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: do not print dot when downloading FW
Stanislaw Gruszka [Thu, 25 Aug 2016 15:05:18 +0000 (17:05 +0200)]
mwifiex: do not print dot when downloading FW

Printing about 3000 lines like this

[   20.691850] mwifiex_pcie 0000:02:00.0: .
[   20.693466] mwifiex_pcie 0000:02:00.0: .

is not useful. If FW downloading will be interrupted, we will get
proper error message about that.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: print status of FW ready event
Stanislaw Gruszka [Thu, 25 Aug 2016 15:05:17 +0000 (17:05 +0200)]
mwifiex: print status of FW ready event

For debugging purpose print content of reg->fw_status register and other
variables values when waiting for firmware ready event.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: make "PCI-E is not the winner" print more informative
Stanislaw Gruszka [Thu, 25 Aug 2016 15:05:16 +0000 (17:05 +0200)]
mwifiex: make "PCI-E is not the winner" print more informative

Printing ret and adapter->winner do not provide any useful information
as those are always 0 at point where the massage is printed. Print value
read from reg->fw_status register instead.

Stanislaw Gruszka <sgruszka@redhat.com>

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agowl18xx: add time sync configuration api
Guy Mishol [Wed, 24 Aug 2016 11:35:27 +0000 (14:35 +0300)]
wl18xx: add time sync configuration api

Add time sync configuration api.
The new api allows to configure the synchronization
mode (STA/AP/MESH) and (in case of Mesh mode) the
master address of each zone.

Signed-off-by: Guy Mishol <guym@ti.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agobrcmfmac: fix pmksa->bssid usage
Nicolas Iooss [Tue, 23 Aug 2016 09:37:17 +0000 (11:37 +0200)]
brcmfmac: fix pmksa->bssid usage

The struct cfg80211_pmksa defines its bssid field as:

    const u8 *bssid;

contrary to struct brcmf_pmksa, which uses:

    u8 bssid[ETH_ALEN];

Therefore in brcmf_cfg80211_del_pmksa(), &pmksa->bssid takes the address
of this field (of type u8**), not the one of its content (which would be
u8*).  Remove the & operator to make brcmf_dbg("%pM") and memcmp()
behave as expected.

This bug have been found using a custom static checker (which checks the
usage of %p... attributes at build time).  It has been introduced in
commit 6c404f34f2bd ("brcmfmac: Cleanup pmksa cache handling code"),
which replaced pmksa->bssid by &pmksa->bssid while refactoring the code,
without modifying struct cfg80211_pmksa definition.

Replace &pmk[i].bssid with pmk[i].bssid too to make the code clearer,
this change does not affect the semantic.

Fixes: 6c404f34f2bd ("brcmfmac: Cleanup pmksa cache handling code")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agobrcmfmac: Add USB ID for Cisco Linksys AE1200
Ismael Luceno [Mon, 22 Aug 2016 22:40:07 +0000 (19:40 -0300)]
brcmfmac: Add USB ID for Cisco Linksys AE1200

The AE1200 comes with different revisions of the BCM43235 chipset,
but all have the same USB ID. Only revision 3 can be supported.

Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortlwifi: Fix missing country code for Great Britain
Larry Finger [Mon, 22 Aug 2016 19:27:59 +0000 (14:27 -0500)]
rtlwifi: Fix missing country code for Great Britain

Some RTL8821AE devices sold in Great Britain have the country code of
0x25 encoded in their EEPROM. This value is not tested in the routine
that establishes the regulatory info for the chip. The fix is to set
this code to have the same capabilities as the EU countries. In addition,
the channels allowed for COUNTRY_CODE_ETSI were more properly suited
for China and Israel, not the EU. This problem has also been fixed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agozd1211rw: fix spelling mistake "firmeware" -> "firmware"
Colin Ian King [Mon, 22 Aug 2016 18:35:05 +0000 (19:35 +0100)]
zd1211rw: fix spelling mistake "firmeware" -> "firmware"

Trivial fix to spelling mistake in dev_err message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Make rtl8xxxu_ampdu_action less chatty
Hans de Goede [Fri, 19 Aug 2016 21:46:42 +0000 (17:46 -0400)]
rtl8xxxu: Make rtl8xxxu_ampdu_action less chatty

On my home network rtl8xxxu is spamming the log with
IEEE80211_AMPDU_RX_START / IEEE80211_AMPDU_RX_STOP every few seconds
turn these messages into debug messages.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
[kvalo@codeaurora.org: fix commit title]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: gen1: Fix non static symbol warning
Wei Yongjun [Fri, 19 Aug 2016 21:46:41 +0000 (17:46 -0400)]
rtl8xxxu: gen1: Fix non static symbol warning

Fixes the following sparse warning:

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:898:1: warning:
 symbol 'rtl8xxxu_gen1_h2c_cmd' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Split filling of TX descriptors into separate functions
Jes Sorensen [Fri, 19 Aug 2016 21:46:40 +0000 (17:46 -0400)]
rtl8xxxu: Split filling of TX descriptors into separate functions

Split the filling of TX descriptors into a generic portion used on all
devices, and format specific helper functions provided in the fops
structure.

This also cleaned up some mess, even if non harmful, in the handling
of txdesc40 descriptors, where the code randomly would switch between
the pointer to tx_desc and tx_desc40.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Determine need for shore preamble before updating TX descriptors
Jes Sorensen [Fri, 19 Aug 2016 21:46:39 +0000 (17:46 -0400)]
rtl8xxxu: Determine need for shore preamble before updating TX descriptors

Another patch to move this detection out of the code handling the TX
descriptor update.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Determine the need for SGI before handling specific TX desc formats
Jes Sorensen [Fri, 19 Aug 2016 21:46:38 +0000 (17:46 -0400)]
rtl8xxxu: Determine the need for SGI before handling specific TX desc formats

In order to be able to split out the TX descriptor handling code,
determine in advance the need to mark SGI.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Simplify calculating of hw value used for setting TX rate
Jes Sorensen [Fri, 19 Aug 2016 21:46:37 +0000 (17:46 -0400)]
rtl8xxxu: Simplify calculating of hw value used for setting TX rate

Calculating the value in one place rather than using one calculation
in one place and a different one for management frames in another
location makes little sense.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Introduce fops bitflag indicating type of thermal meter
Jes Sorensen [Fri, 19 Aug 2016 21:46:36 +0000 (17:46 -0400)]
rtl8xxxu: Introduce fops bitflag indicating type of thermal meter

Do not rely on TX descriptor size to determine the thermal meter
type.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Convert flags in rtl8xxxu_fileops to bitflags
Jes Sorensen [Fri, 19 Aug 2016 21:46:35 +0000 (17:46 -0400)]
rtl8xxxu: Convert flags in rtl8xxxu_fileops to bitflags

This leaves space for a few more flags within the same space.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Use flag to indicate whether device has TX report timer support
Jes Sorensen [Fri, 19 Aug 2016 21:46:34 +0000 (17:46 -0400)]
rtl8xxxu: Use flag to indicate whether device has TX report timer support

Use a fileops flag to indicate whether the device has TX report timer
support. This will make it easier to include future devices such as
8188eu to use the TX report timer.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Add interrupt bit definitions for gen2 parts
Jes Sorensen [Fri, 19 Aug 2016 21:46:33 +0000 (17:46 -0400)]
rtl8xxxu: Add interrupt bit definitions for gen2 parts

These are primarily needed for SDIO/PCI parts, but the vendor driver
still sets them for some USB devices.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Add bit definitions for REG_FPGA0_TX_INFO
Jes Sorensen [Fri, 19 Aug 2016 21:46:32 +0000 (17:46 -0400)]
rtl8xxxu: Add bit definitions for REG_FPGA0_TX_INFO

This adds TX antenna selection bit defines for OFDM mode.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Simplify code setting TX buffer boundary
Jes Sorensen [Fri, 19 Aug 2016 21:46:31 +0000 (17:46 -0400)]
rtl8xxxu: Simplify code setting TX buffer boundary

With all devices now offering fops->total_page_num, get rid of the
if mess for setting the TX buffer boundary.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Remove now obsolete rtl8xxxu_old_init_queue_reserved_page()
Jes Sorensen [Fri, 19 Aug 2016 21:46:30 +0000 (17:46 -0400)]
rtl8xxxu: Remove now obsolete rtl8xxxu_old_init_queue_reserved_page()

Switching over the old devices to use the new function allows us to
get rid of this legacy.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Switch 8192cu/8188cu devices to use rtl8xxxu_init_queue_reserved_page()
Jes Sorensen [Fri, 19 Aug 2016 21:46:29 +0000 (17:46 -0400)]
rtl8xxxu: Switch 8192cu/8188cu devices to use rtl8xxxu_init_queue_reserved_page()

This was the last user of the old
rtl8xxxu_old_init_queue_reserved_page() which can now be removed.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Switch 8723a to use new rtl8xxxu_init_queue_reserved_page() routine
Jes Sorensen [Fri, 19 Aug 2016 21:46:28 +0000 (17:46 -0400)]
rtl8xxxu: Switch 8723a to use new rtl8xxxu_init_queue_reserved_page() routine

This changes the pub-queue value written to REQ_RQPN, however the old
code used a hard coded minimum value assuming there would always be an
active lo-queue, even when no USB EP was found for it.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Add TX page defines for 8723b
Jes Sorensen [Fri, 19 Aug 2016 21:46:27 +0000 (17:46 -0400)]
rtl8xxxu: Add TX page defines for 8723b

This switches the 8723b driver to use the new
rtl8xxxu_init_queue_reserved_page() function.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Add TP-Link TL-WN823N v2 to list of supported devices
Jes Sorensen [Fri, 19 Aug 2016 21:46:26 +0000 (17:46 -0400)]
rtl8xxxu: Add TP-Link TL-WN823N v2 to list of supported devices

This is an rtl8192eu based dongle (the v1 is an rtl8192cu). Reported
and tested by Myckel Habets.

Reported-by: Myckel Habets <myckel@sdf.lonestar.org>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Fix error handling if rtl8xxxu_init_device() fails
Jes Sorensen [Fri, 19 Aug 2016 21:46:25 +0000 (17:46 -0400)]
rtl8xxxu: Fix error handling if rtl8xxxu_init_device() fails

For some reason we lost the code bailing if rtl8xxxu_init_device()
returned an error.

This catches the error and also cleans up the error handling.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Mark 0x2001:0x3308 as tested
Jes Sorensen [Fri, 19 Aug 2016 21:46:24 +0000 (17:46 -0400)]
rtl8xxxu: Mark 0x2001:0x3308 as tested

D-Link DWA-121 is reported as working.

Reported-by: Stefano Bravi <stefanobravi69@libero.it>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortl8xxxu: Mark 0x20f4:0x648b as tested
Jes Sorensen [Fri, 19 Aug 2016 21:46:23 +0000 (17:46 -0400)]
rtl8xxxu: Mark 0x20f4:0x648b as tested

Successfully tested by Jocelyn Mayer

Reported-by: J. Mayer <l_indien@magic.fr>
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agowlcore: Remove wl pointer from wl_sta structure
Maxim Altshul [Mon, 15 Aug 2016 08:23:38 +0000 (11:23 +0300)]
wlcore: Remove wl pointer from wl_sta structure

This field was added to wl_sta struct to get hw in situations
where it was not given to driver by mac80211. In our case,
get_expected_throughput op did not send hw to driver.

This patch reverts the change, as it is no longer needed due to commit
4fdbc67a25ce ("mac80211: call get_expected_throughput only after adding
station") as hw is now sent as a parameter.

Signed-off-by: Maxim Altshul <maxim.altshul@ti.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortlwifi: rtl8723ae: Fix leak in _rtl8723e_read_adapter_info()
Christian Engelmayer [Tue, 9 Aug 2016 19:54:12 +0000 (21:54 +0200)]
rtlwifi: rtl8723ae: Fix leak in _rtl8723e_read_adapter_info()

In case of (rtlhal->oem_id != RT_CID_DEFAULT), the function directly
returns and leaks the already allocated hwinfo memory. Go through the
correct exit path.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortlwifi: rtl8192de: Fix leak in _rtl92de_read_adapter_info()
Christian Engelmayer [Tue, 9 Aug 2016 19:19:57 +0000 (21:19 +0200)]
rtlwifi: rtl8192de: Fix leak in _rtl92de_read_adapter_info()

In case rtl_get_hwinfo() fails, the function directly returns and leaks the
already allocated hwinfo memory. Go through the correct exit path.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agobrcmfmac: add missing header dependencies
Baoyou Xie [Mon, 29 Aug 2016 12:39:35 +0000 (20:39 +0800)]
brcmfmac: add missing header dependencies

We get 1 warning when building kernel with W=1:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/tracepoint.c:23:6: warning: no previous prototype for '__brcmf_err' [-Wmissing-prototypes]

In fact, this function is declared in brcmfmac/debug.h, so this patch
adds missing header dependencies.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: fix missing break on IEEE80211_STYPE_ACTION case
Colin Ian King [Tue, 16 Aug 2016 12:10:13 +0000 (13:10 +0100)]
mwifiex: fix missing break on IEEE80211_STYPE_ACTION case

The IEEE80211_STYPE_ACTION case is missing a break in the switch
statement, causing it to fall through to the default case that
reports a debug message about an unknown frame subtype. Fix this
by adding in the missing break statement.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agort2x00usb: Fix error return code
Christophe Jaillet [Thu, 11 Aug 2016 14:38:54 +0000 (16:38 +0200)]
rt2x00usb: Fix error return code

We know that 'retval = 0' because it has been tested a few lines above.
So, if 'devm_kmalloc' fails, 0 will be returned instead of an error code.
Return -ENOMEM instead.

Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: add custom regulatory domain support
Amitkumar Karwar [Tue, 9 Aug 2016 14:50:46 +0000 (20:20 +0530)]
mwifiex: add custom regulatory domain support

This patch creates custom regulatory rules based on the information
received from firmware and enable them during wiphy registration.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: add CHAN_REGION_CFG command
Amitkumar Karwar [Tue, 9 Aug 2016 14:50:45 +0000 (20:20 +0530)]
mwifiex: add CHAN_REGION_CFG command

This patch adds command preparation and response handling for
CHAN_REGION_CFG command. These changes are prerequisites for adding
custom regulatory domain support.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: correct aid value during tdls setup
Xinming Hu [Tue, 9 Aug 2016 14:50:44 +0000 (20:20 +0530)]
mwifiex: correct aid value during tdls setup

AID gets updated during TDLS setup, but modified value isn't reflected
in "priv->assoc_rsp_buf". This causes TDLS setup failure. The problem is
fixed here.

Fixes: 4aff53ef18e4a4 ("mwifiex: parsing aid while receiving..")
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: simplify length computation for some memset
Christophe Jaillet [Mon, 8 Aug 2016 07:39:00 +0000 (09:39 +0200)]
mwifiex: simplify length computation for some memset

This patch should be a no-op. It just simplifies code by using the name of
a variable instead of its type when calling 'sizeof'.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: fix the length parameter of a memset
Christophe Jaillet [Mon, 8 Aug 2016 07:38:48 +0000 (09:38 +0200)]
mwifiex: fix the length parameter of a memset

In 'mwifiex_get_ver_ext', we have:
   struct mwifiex_ver_ext ver_ext;

   memset(&ver_ext, 0, sizeof(struct host_cmd_ds_version_ext));

This is likely that memset'ing sizeof(struct mwifiex_ver_ext) was expected.
Remove the ambiguity by using the variable name directly instead of its
type.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agortlwifi: remove superfluous condition
Heinrich Schuchardt [Tue, 2 Aug 2016 19:26:21 +0000 (21:26 +0200)]
rtlwifi: remove superfluous condition

If sta == NULL, the changed line will not be reached.
So no need to check that sta != NULL here.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agoath5k: fix EEPROM dumping via debugfs
Sergey Ryazanov [Tue, 2 Aug 2016 11:19:28 +0000 (14:19 +0300)]
ath5k: fix EEPROM dumping via debugfs

EEPROM size calculated in 16-bit words, so we should take into account
this fact during buffer allocation.

CC: Jiri Slaby <jirislaby@gmail.com>
CC: Nick Kossifidis <mickflemm@gmail.com>
CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agowl3501_cs: Add spinlock to wl3501_reset
Pavel Andrianov [Tue, 2 Aug 2016 09:41:53 +0000 (12:41 +0300)]
wl3501_cs: Add spinlock to wl3501_reset

Likely wl3501_reset should acquire spinlock as wl3501_{open, close}.
One of calls of wl3501_reset has been already protected.
The others were unprotected and might lead to a race condition.
The patch adds spinlock into the wl3501_reset and removes it from
wl3501_tx_timeout.

Found by Linux Driver Verification project (linuxtesting.org)

Signed-off-by: Pavel Andrianov <andrianov@ispras.ru>
Acked-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: key_material_v2 remove superfluous condition
Heinrich Schuchardt [Sun, 31 Jul 2016 12:11:21 +0000 (14:11 +0200)]
mwifiex: key_material_v2 remove superfluous condition

We are using mac as source address in a memcpy.
In the lines below we can assume mac is not NULL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: remove superfluous condition
Heinrich Schuchardt [Sun, 31 Jul 2016 10:39:15 +0000 (12:39 +0200)]
mwifiex: remove superfluous condition

for_each_property_of_node is only executed if the
property prop is not NULL.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agobcma: support BCM53573 series of wireless SoCs
Rafał Miłecki [Mon, 25 Jul 2016 18:33:56 +0000 (20:33 +0200)]
bcma: support BCM53573 series of wireless SoCs

BCM53573 seems to be the first series of Northstar family with wireless
on the chip. The base models are BCM53573-s (A0, A1) and there is also
BCM47189B0 which seems to be some small modification.

The only problem with these chipsets seems to be watchdog. It's totally
unavailable on 53573A0 / 53573A1 and preferable PMU watchdog is broken
on 53573B0 / 53573B1.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: fix radar detection issue
Ganapathi Bhat [Mon, 25 Jul 2016 15:51:11 +0000 (21:21 +0530)]
mwifiex: fix radar detection issue

It's been observed that firmware sends RADAR detected event without
specifying bss_num/bss_type. Also, the event body is empty.
Currently the event is being ignored by driver.

This patch checks on which interface 11H is active, accordingly fills
bss_num/bss_type and handles the event. Condition
"if (le32_to_cpu(rdr_event->passed))" which always fails is also removed.

Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: add HT aggregation support for adhoc mode
Xinming Hu [Mon, 25 Jul 2016 15:51:10 +0000 (21:21 +0530)]
mwifiex: add HT aggregation support for adhoc mode

This patch adds HT support for adhoc station. Firmware will upload
ibss sta connect event with beacon data, whenever new station joins
the adhoc network. Driver will check the HT IE and decide whether to
support HT aggreagation or not.

Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: remove misleading disconnect message
Amitkumar Karwar [Mon, 25 Jul 2016 15:51:09 +0000 (21:21 +0530)]
mwifiex: remove misleading disconnect message

Disconnect message in mwifiex_reset_connect_state() would displays
necessary information. We unnecessarily have exactly same message in
cfg80211_disconnect(). As priv->cfg_bssid is cleared at this point of
time, it prints incorrect(all zero) MAC.

This message is removed here.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: process rxba_sync event
Xinming Hu [Mon, 25 Jul 2016 15:51:08 +0000 (21:21 +0530)]
mwifiex: process rxba_sync event

Firmware may filter and drop packets under certain condition, for
example, ARP SA=DA packet. this event will be used to synchronize
the Rx Block Acknowledgment (BA) window bitmap and to fill any holes
in driver side.

Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: support random MAC address for scanning
Ganapathi Bhat [Mon, 25 Jul 2016 15:51:07 +0000 (21:21 +0530)]
mwifiex: support random MAC address for scanning

This patch advertises RANDOM_MAC_ADDR feature to cfg80211. It allow the
application to issue scan with a MAC address and mask. Random MACs are
generated and used in probe requests sent for scanning until it is changed
by the application or device is restarted.

Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: fix failed to reconnect after interface disabled/enabled
Amitkumar Karwar [Mon, 25 Jul 2016 15:51:06 +0000 (21:21 +0530)]
mwifiex: fix failed to reconnect after interface disabled/enabled

Recent patch "mwifiex: fix NULL pointer" skips extended scan event
handling when suspend is in progress. It created a problem for scan
after interface disabled/enabled case.

This patch solves the problem by checking netif_running() status.

Fixes:16d25da94f3d654 ("mwifiex: fix NULL pointer dereference during suspend")
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: add region code information in debugfs
Karthik D A [Mon, 25 Jul 2016 15:51:05 +0000 (21:21 +0530)]
mwifiex: add region code information in debugfs

region code is an EEPROM setting received from firmware. Let's display
this in debugfs along with other information.

Signed-off-by: Karthik D A <karthida@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agomwifiex: Fixed endianness problem for big endian platform
Karthik D A [Mon, 25 Jul 2016 15:51:04 +0000 (21:21 +0530)]
mwifiex: Fixed endianness problem for big endian platform

The driver sends and recives information to and from the firmware.
Correct endianness should be ensured as firmware follows little
endian format and host can be little/big endian.

Signed-off-by: Karthik D A <karthida@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agowlcore: spi: fix non static symbol warning
Wei Yongjun [Fri, 22 Jul 2016 14:08:08 +0000 (14:08 +0000)]
wlcore: spi: fix non static symbol warning

Fixes the following sparse warning:

drivers/net/wireless/ti/wlcore/spi.c:87:34: warning:
 symbol 'wilink_data' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agohostap: Use memdup_user() to reuse code
Rajan Vaja [Thu, 21 Jul 2016 08:14:44 +0000 (13:44 +0530)]
hostap: Use memdup_user() to reuse code

Fix coccicheck warning which recommends to
use memdup_user() instead of reimplementing its
code.

This patch fixes below coccicheck warnings:

drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3044:9-16: WARNING
opportunity for memdup_user
drivers/net/wireless/intersil/hostap/hostap_ioctl.c:3806:9-16: WARNING
opportunity for memdup_user

Signed-off-by: Rajan Vaja <rajan.vaja@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
8 years agoath9k: fix AR5416 access GPIO warning
Miaoqing Pan [Thu, 4 Aug 2016 07:48:34 +0000 (15:48 +0800)]
ath9k: fix AR5416 access GPIO warning

The warning was seen on AR5416 chip, which invoke ath9k_hw_gio_get()
before the GPIO initialized correctly.

    WARNING: CPU: 1 PID: 1159 at ~/drivers/net/wireless/ath/ath9k/hw.c:2776 ath9k_hw_gpio_get+0x148/0x1a0 [ath9k_hw]
    ...
    CPU: 1 PID: 1159 Comm: systemd-udevd Not tainted 4.7.0-rc7-aptosid-amd64 #1 aptosid 4.7~rc7-1~git92.slh.3
    Hardware name:                  /DH67CL, BIOS BLH6710H.86A.0160.2012.1204.1156 12/04/2012
      0000000000000286 00000000f912d633 ffffffff81290fd3 0000000000000000
      0000000000000000 ffffffff81063fd4 ffff88040c6dc018 0000000000000000
      0000000000000002 0000000000000000 0000000000000100 ffff88040c6dc018
    Call Trace:
      [<ffffffff81290fd3>] ? dump_stack+0x5c/0x79
      [<ffffffff81063fd4>] ? __warn+0xb4/0xd0
      [<ffffffffa0668fb8>] ? ath9k_hw_gpio_get+0x148/0x1a0 [ath9k_hw]

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath9k: mark ath_fill_led_pin() static
Baoyou Xie [Mon, 29 Aug 2016 12:21:13 +0000 (20:21 +0800)]
ath9k: mark ath_fill_led_pin() static

We get 1 warning about global functions without a declaration
in the ath9k gpio driver when building with W=1:
drivers/net/wireless/ath/ath9k/gpio.c:25:6: warning: no previous prototype for 'ath_fill_led_pin' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is declared
and don't need a declaration, but can be made static.
so this patch marks it 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
8 years agoath10k: fix spelling mistake "montior" -> "monitor"
Colin Ian King [Fri, 26 Aug 2016 18:08:52 +0000 (19:08 +0100)]
ath10k: fix spelling mistake "montior" -> "monitor"

Trivial fix to spelling mistake in ath10k_warn message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>