Linus Torvalds [Wed, 13 Dec 2006 02:51:51 +0000 (18:51 -0800)]
Merge git://git./linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
Fix inotify maintainers entry
Fix typo in new debug options.
Jon needs a new shift key.
fs: Convert kmalloc() + memset() to kzalloc() in fs/.
configfs.h: Remove dead macro definitions.
kconfig: Standardize "depends" -> "depends on" in Kconfig files
e100: replace kmalloc with kcalloc
um: replace kmalloc+memset with kzalloc
fix typo in net/ipv4/ip_fragment.c
include/linux/compiler.h: reject gcc 3 < gcc 3.2
Kconfig: fix spelling error in config KALLSYMS help text
Remove duplicate "have to" in comment
Fix small typo in drivers/serial/icom.c
Use consistent casing in help message
EXT{2,3,4}_FS: remove outdated part of the help text
Linus Torvalds [Wed, 13 Dec 2006 02:51:36 +0000 (18:51 -0800)]
Merge /linux/kernel/git/wim/linux-2.6-watchdog
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
[WATCHDOG] pcwd_usb.c generic HID include file
[WATCHDOG] watchdog miscdevice patch
[WATCHDOG] rm9k_wdt: fix interrupt handler arguments
[WATCHDOG] rm9k_wdt: fix compilation
Wim Van Sebroeck [Tue, 12 Dec 2006 22:48:41 +0000 (23:48 +0100)]
Merge branch 'master' of /linux/kernel/git/wim/linux-2.6-watchdog
Wim Van Sebroeck [Tue, 12 Dec 2006 22:46:47 +0000 (23:46 +0100)]
[WATCHDOG] pcwd_usb.c generic HID include file
Now that the generic HID layer created include/linux/hid.h
we can use the HID_REQ_SET_REPORT and HID_DT_REPORT defines
directly from that include file.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Dave Jones [Tue, 12 Dec 2006 22:41:41 +0000 (17:41 -0500)]
Merge ../linus
Conflicts:
drivers/cpufreq/cpufreq.c
Rafa³ Bilski [Thu, 30 Nov 2006 02:47:41 +0000 (03:47 +0100)]
[CPUFREQ] Longhaul - Add support for CN400
Support for CN400 northbridge when ACPI C3 isn't available.
Tested on Epia SP13000. Thanks to Robert for testing it.
Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>
Rafa³ Bilski [Thu, 30 Nov 2006 02:36:44 +0000 (03:36 +0100)]
[CPUFREQ] Longhaul - fix 200MHz FSB
On board of Epia SP13000 is 10x133Mhz VIA Nehemiah. It is reported
as 10x200MHz. This patch is fixing this issue.
Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>
Dominik Brodowski [Tue, 5 Dec 2006 01:39:16 +0000 (20:39 -0500)]
[CPUFREQ] p4-clockmod: fix support for Core
Support for Core CPUs was broken in two ways in speedstep-lib: for x86_64,
we missed a MSR definition; for both x86_64 and i386, the FSB calculation
was wrong by four (it's a quad-pumped bus). Also increase the accuracy
of the calculation.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
Dave Jones [Tue, 12 Dec 2006 22:26:35 +0000 (17:26 -0500)]
[CPUFREQ] Fix git URL.
Signed-off-by: Dave Jones <davej@redhat.com>
Venkatesh Pallipadi [Tue, 14 Nov 2006 01:47:44 +0000 (17:47 -0800)]
[CPUFREQ] Fix the bug in duplicate freq elimination code in acpi-cpufreq
Fix the bug in duplicate states elimination in acpi-cpufreq.
Bug: Due to duplicate state elimiation in the loop earlier, the number
of valid_states can be less than perf->state_count, in which case
freq_table was ending up with some garbage/uninitialized entries
in the table.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
From: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Gary Hade [Fri, 10 Nov 2006 19:20:47 +0000 (11:20 -0800)]
[CPUFREQ] speedstep-centrino should ignore upper performance control bits
On some systems there could be bits set in the upper half of
the control value provided by the _PSS object. These bits are
only relevant for cpufreq drivers that use IO ports which are not
currently supported by the speedstep-centrino driver. The current
MSR oriented code assumes that upper bits are not set and thus
fails to work correctly when they are. e.g. the control and status
value equality check failed on the IBM x3650 even though the ACPI
spec allows inequality.
Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Jean Delvare [Thu, 9 Nov 2006 17:29:35 +0000 (18:29 +0100)]
[CPUFREQ] Optimize gx-suspmod revision ID fetching
We don't need a temporary variable to get the PCI revision ID.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Jones <davej@redhat.com>
Cal Peake [Tue, 12 Dec 2006 19:18:16 +0000 (20:18 +0100)]
Fix inotify maintainers entry
Update the inotify entry in MAINTAINERS to be consistent with the rest of
the file.
Signed-off-by: Cal Peake <cp@absolutedigital.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Dave Jones [Tue, 12 Dec 2006 19:16:36 +0000 (20:16 +0100)]
Fix typo in new debug options.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Dave Jones [Tue, 12 Dec 2006 19:15:40 +0000 (20:15 +0100)]
Jon needs a new shift key.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Robert P. J. Day [Tue, 12 Dec 2006 19:07:35 +0000 (20:07 +0100)]
fs: Convert kmalloc() + memset() to kzalloc() in fs/.
Convert the single available instance of kmalloc() + memset() to
kzalloc() in the fs/ directory.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Robert P. J. Day [Tue, 12 Dec 2006 19:05:50 +0000 (20:05 +0100)]
configfs.h: Remove dead macro definitions.
Delete the __ATTR-related macro definitions since these are now
defined in include/linux/sysfs.h.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Robert P. J. Day [Tue, 12 Dec 2006 19:04:19 +0000 (20:04 +0100)]
kconfig: Standardize "depends" -> "depends on" in Kconfig files
Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Yan Burman [Tue, 12 Dec 2006 19:03:10 +0000 (20:03 +0100)]
e100: replace kmalloc with kcalloc
Replace kmalloc+memset with kcalloc
Signed-off-by: Yan Burman <burman.yan@gmail.com>
Acked-By: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Yan Burman [Tue, 12 Dec 2006 18:54:52 +0000 (19:54 +0100)]
um: replace kmalloc+memset with kzalloc
Replace kmalloc+memset with kzalloc
Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Peter Zijlstra [Tue, 12 Dec 2006 18:48:59 +0000 (19:48 +0100)]
fix typo in net/ipv4/ip_fragment.c
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Nicolas Pitre [Tue, 12 Dec 2006 18:32:29 +0000 (13:32 -0500)]
[PATCH] remove config ordering/dependency between ucb1400-ts and sound subsystem
Commit
2d4ba4a3b9aef95d328d74a17ae84f8d658059e2 introduced a dependency
that was never meant to exist when the ac97_bus.c module was created.
Move ac97_bus.c up the directory hierarchy to make sure it is built when
selected even if sound is configured out so things work as originally
intended.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alistair John Strachan [Tue, 12 Dec 2006 18:28:50 +0000 (19:28 +0100)]
include/linux/compiler.h: reject gcc 3 < gcc 3.2
The kernel doesn't compile with GCC <3.2, do not allow it to succeed if GCC
3.0.x or 3.1.x are used.
Signed-off-by: Alistair John Strachan <s0348365@sms.ed.ac.uk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Jesper Juhl [Tue, 12 Dec 2006 18:25:11 +0000 (19:25 +0100)]
Kconfig: fix spelling error in config KALLSYMS help text
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-By: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Rolf Eike Beer [Tue, 12 Dec 2006 18:23:02 +0000 (19:23 +0100)]
Remove duplicate "have to" in comment
Introduced in commit
7cc13edc139108bb527b692f0548dce6bc648572.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Linus Torvalds [Tue, 12 Dec 2006 18:21:01 +0000 (10:21 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
[patch 3/3] OCFS2 Configurable timeouts - Protocol changes
[patch 2/3] OCFS2 Configurable timeouts
[patch 1/3] OCFS2 - Expose struct o2nm_cluster
ocfs2: Synchronize feature incompat flags in ocfs2_fs.h
ocfs2: update mount option documentation
ocfs2: local mounts
Thomas Hisch [Tue, 12 Dec 2006 18:20:35 +0000 (19:20 +0100)]
Fix small typo in drivers/serial/icom.c
Signed-off-by: Thomas Hisch <t.hisch@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Samuel Tardieu [Tue, 12 Dec 2006 18:09:40 +0000 (19:09 +0100)]
Use consistent casing in help message
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Jan Engelhardt [Tue, 12 Dec 2006 18:07:45 +0000 (19:07 +0100)]
EXT{2,3,4}_FS: remove outdated part of the help text
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Linus Torvalds [Tue, 12 Dec 2006 17:57:55 +0000 (09:57 -0800)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c: Fix OMAP clock prescaler to match the comment
i2c: Refactor a kfree in i2c-dev
i2c: Fix return value check in i2c-dev
i2c: Enable PEC on more i2c-i801 devices
i2c: Discard the i2c algo del_bus wrappers
i2c: New ARM Versatile/Realview bus driver
i2c: fix broken ds1337 initialization
i2c: i2c-i801 documentation update
i2c: Use the __ATTR macro where possible
i2c: Whitespace cleanups
i2c: Use put_user instead of copy_to_user where possible
i2c: New Atmel AT91 bus driver
i2c: Add support for nested i2c bus locking
i2c: Cleanups to the i2c-nforce2 bus driver
i2c: Add request/release_mem_region to i2c-ibm_iic bus driver
i2c: New Philips PNX bus driver
i2c: Delete the broken i2c-ite bus driver
i2c: Update the list of driver IDs
i2c: Fix documentation typos
Ingo Molnar [Tue, 12 Dec 2006 16:20:42 +0000 (17:20 +0100)]
[PATCH] netpoll: fix netpoll lockup
current -git doesnt boot on my laptop due to netpoll not unlocking the
tx lock in the else branch.
booted this up on my laptop with lockdep enabled and there are no
locking complaints and it works fine.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Tue, 12 Dec 2006 16:14:46 +0000 (08:14 -0800)]
Merge /pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (29 commits)
sh: Fixup SH-2 BUG() trap handling.
sh: Use early_param() for earlyprintk parsing.
sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096.
sh: Fixup .data.page_aligned.
sh: Hook up SH7722 scif ipr interrupts.
sh: Fixup sh_bios() trap handling.
sh: SH-MobileR SH7722 CPU support.
sh: Fixup dma_cache_sync() callers.
sh: Convert remaining remap_area_pages() users to ioremap_page_range().
sh: Fixup kernel_execve() for syscall cleanups.
sh: Fix get_wchan().
sh: BUG() handling through trapa vector.
rtc: rtc-sh: alarm support.
rtc: rtc-sh: fix rtc for out-by-one for the month.
sh: Kill off unused SE7619 I/O ops.
serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings.
sh: Split out atomic ops logically.
sh: Fix Solution Engine 7619 build.
sh: Trivial build fixes for SH-2 support.
sh: IPR IRQ updates for SH7619/SH7206.
...
Ingo Molnar [Tue, 12 Dec 2006 12:49:35 +0000 (13:49 +0100)]
[PATCH] net, 8139too.c: fix netpoll deadlock
fix deadlock in the 8139too driver: poll handlers should never forcibly
enable local interrupts, because they might be used by netpoll/printk
from IRQ context.
=================================
[ INFO: inconsistent lock state ]
2.6.19 #11
---------------------------------
inconsistent {softirq-on-W} -> {in-softirq-W} usage.
swapper/1 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&npinfo->poll_lock){-+..}, at: [<
c0350a41>] net_rx_action+0x64/0x1de
{softirq-on-W} state was registered at:
[<
c0134c86>] mark_lock+0x5b/0x39c
[<
c0135012>] mark_held_locks+0x4b/0x68
[<
c01351e9>] trace_hardirqs_on+0x115/0x139
[<
c02879e6>] rtl8139_poll+0x3d7/0x3f4
[<
c035c85d>] netpoll_poll+0x82/0x32f
[<
c035c775>] netpoll_send_skb+0xc9/0x12f
[<
c035cdcc>] netpoll_send_udp+0x253/0x25b
[<
c0288463>] write_msg+0x40/0x65
[<
c011cead>] __call_console_drivers+0x45/0x51
[<
c011cf16>] _call_console_drivers+0x5d/0x61
[<
c011d4fb>] release_console_sem+0x11f/0x1d8
[<
c011d7d7>] register_console+0x1ac/0x1b3
[<
c02883f8>] init_netconsole+0x55/0x67
[<
c010040c>] init+0x9a/0x24e
[<
c01049cf>] kernel_thread_helper+0x7/0x10
[<
ffffffff>] 0xffffffff
irq event stamp: 819992
hardirqs last enabled at (819992): [<
c0350a16>] net_rx_action+0x39/0x1de
hardirqs last disabled at (819991): [<
c0350b1e>] net_rx_action+0x141/0x1de
softirqs last enabled at (817552): [<
c01214e4>] __do_softirq+0xa3/0xa8
softirqs last disabled at (819987): [<
c0106051>] do_softirq+0x5b/0xc9
other info that might help us debug this:
no locks held by swapper/1.
stack backtrace:
[<
c0104d88>] dump_trace+0x63/0x1e8
[<
c0104f26>] show_trace_log_lvl+0x19/0x2e
[<
c010532d>] show_trace+0x12/0x14
[<
c0105343>] dump_stack+0x14/0x16
[<
c0134980>] print_usage_bug+0x23c/0x246
[<
c0134d33>] mark_lock+0x108/0x39c
[<
c01356a7>] __lock_acquire+0x361/0x9ed
[<
c0136018>] lock_acquire+0x56/0x72
[<
c03aff1f>] _spin_lock+0x35/0x42
[<
c0350a41>] net_rx_action+0x64/0x1de
[<
c0121493>] __do_softirq+0x52/0xa8
[<
c0106051>] do_softirq+0x5b/0xc9
[<
c0121338>] irq_exit+0x3c/0x48
[<
c0106163>] do_IRQ+0xa4/0xbd
[<
c01047c6>] common_interrupt+0x2e/0x34
[<
c011db92>] vprintk+0x2c0/0x309
[<
c011dbf6>] printk+0x1b/0x1d
[<
c01003f2>] init+0x80/0x24e
[<
c01049cf>] kernel_thread_helper+0x7/0x10
=======================
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar [Tue, 12 Dec 2006 11:10:28 +0000 (12:10 +0100)]
[PATCH] lockdep: fix seqlock_init()
seqlock_init() needs to use spin_lock_init() for dynamic locks, so that
lockdep is notified about the presence of a new lock.
(this is a fallout of the recent networking merge, which started using
the so-far unused seqlock_init() API.)
This fix solves the following lockdep-internal warning on current -git:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
__lock_acquire+0x10c/0x9f9
lock_acquire+0x56/0x72
_spin_lock+0x35/0x42
neigh_destroy+0x9d/0x12e
neigh_periodic_timer+0x10a/0x15c
run_timer_softirq+0x126/0x18e
__do_softirq+0x6b/0xe6
do_softirq+0x64/0xd2
ksoftirqd+0x82/0x138
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Tue, 12 Dec 2006 16:01:50 +0000 (08:01 -0800)]
Merge branch 'master' of /linux/kernel/git/mchehab/v4l-dvb
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
V4L/DVB (4954): Fix: On ia64, i2c adap->inb/adap->outb are wrongly evaluated
Linus Torvalds [Tue, 12 Dec 2006 15:45:48 +0000 (07:45 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/shaggy/jfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
JFS: Fix conflicting superblock flags
Mauro Carvalho Chehab [Mon, 11 Dec 2006 08:37:14 +0000 (05:37 -0300)]
V4L/DVB (4954): Fix: On ia64, i2c adap->inb/adap->outb are wrongly evaluated
i2c defines two callbacks (inb/outb). On ia64, since it defines also two macros
with those names, it causes the following errors:
drivers/media/video/usbvision/usbvision-i2c.c:64:39: macro "outb" passed 4 arguments, but takes just 2
drivers/media/video/usbvision/usbvision-i2c.c: In function `try_write_address':
drivers/media/video/usbvision/usbvision-i2c.c:64: warning: assignment makes integer from pointer without a cast
drivers/media/video/usbvision/usbvision-i2c.c:89:38: macro "inb" passed 4 arguments, but takes just 1
drivers/media/video/usbvision/usbvision-i2c.c: In function `try_read_address':
drivers/media/video/usbvision/usbvision-i2c.c:89: warning: assignment makes integer from pointer without a cast
drivers/media/video/usbvision/usbvision-i2c.c:85: warning: unused variable `buf'
drivers/media/video/usbvision/usbvision-i2c.c:173:53: macro "inb" passed 4 arguments, but takes just 1
drivers/media/video/usbvision/usbvision-i2c.c: In function `usb_xfer':
drivers/media/video/usbvision/usbvision-i2c.c:173: warning: assignment makes integer from pointer without a cast
drivers/media/video/usbvision/usbvision-i2c.c:179:54: macro "outb" passed 4 arguments, but takes just 2
drivers/media/video/usbvision/usbvision-i2c.c:179: warning: assignment makes integer from pointer without a cast
thanks to Andrew Morton for pointing this.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
FUJITA Tomonori [Tue, 12 Dec 2006 09:26:55 +0000 (10:26 +0100)]
[PATCH] remove unnecessary blk_queue_bounce in SG_IO
When I converted the original patch, I left unnecessary blk_queue_bounce in
SG_IO.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
FUJITA Tomonori [Mon, 11 Dec 2006 09:01:34 +0000 (10:01 +0100)]
[PATCH] fix SG_IO bio leak
This patch fixes bio leaks in SG_IO. rq->bio can be changed after io
completion, so we need to reset rq->bio before calling blk_rq_unmap_user()
http://marc.theaimsgroup.com/?l=linux-kernel&m=
116570666807983&w=2
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Boaz Harrosh [Tue, 5 Dec 2006 09:19:14 +0000 (10:19 +0100)]
[PATCH] remove blk_queue_activity_fn
While working on bidi support at struct request level
I have found that blk_queue_activity_fn is actually never used.
The only user is in ide-probe.c with this code:
/* enable led activity for disk drives only */
if (drive->media == ide_disk && hwif->led_act)
blk_queue_activity_fn(q, hwif->led_act, drive);
And led_act is never initialized anywhere.
(Looking back at older kernels it was used in the PPC arch, but was removed around 2.6.18)
Unless it is all for future use off course.
(this patch is against linux-2.6-block.git as off 2006/12/4)
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Linus Torvalds [Tue, 12 Dec 2006 02:35:17 +0000 (18:35 -0800)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
[NETPOLL]: Fix local_bh_enable() warning.
[IPVS]: Make ip_vs_sync.c <= 80col wide.
[IPVS]: Use msleep_interruptable() instead of ssleep() aka msleep()
[HAMRADIO]: Fix baycom_epp.c compile failure.
[DCCP]: Whitespace cleanups
[DCCP] ccid3: Fixup some type conversions related to rtts
[DCCP] ccid3: BUG-FIX - conversion errors
[DCCP] ccid3: Reorder packet history source file
[DCCP] ccid3: Reorder packet history header file
[DCCP] ccid3: Make debug output consistent
[DCCP] ccid3: Perform history operations only after packet has been sent
[DCCP] ccid3: TX history - remove unused field
[DCCP] ccid3: Shift window counter computation
[DCCP] ccid3: Sanity-check RTT samples
[DCCP] ccid3: Initialise RTT values
[DCCP] ccid: Deprecate ccid_hc_tx_insert_options
[DCCP]: Warn when discarding packet due to internal errors
[DCCP]: Only deliver to the CCID rx side in charge
[DCCP]: Simplify TFRC calculation
[DCCP]: Debug timeval operations
...
Linus Torvalds [Tue, 12 Dec 2006 02:28:59 +0000 (18:28 -0800)]
Merge branch 'for-linus' of git://atmel.no/~hskinnemoen/linux/kernel/avr32
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
[AVR32] Add missing #include <linux/param.h> to delay.c
[AVR32] Pass dev parameter to dma_cache_sync()
[AVR32] Implement intc_get_pending()
[AVR32] Don't include <asm/delay.h>
[AVR32] Put the chip in "stop" mode when halting the system
[AVR32] Set flow handler for external interrupts
[AVR32] Remove unused file
[AVR32] Remove mii_phy_addr and eth_addr from eth_platform_data
[AVR32] Move ethernet tag parsing to board-specific code
[AVR32] Add macb1 platform_device
[AVR32] Portmux API update
Linus Torvalds [Tue, 12 Dec 2006 02:24:58 +0000 (18:24 -0800)]
Merge git://git./linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (36 commits)
[POWERPC] Generic BUG for powerpc
[PPC] Fix compile failure do to introduction of PHY_POLL
[POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set
[POWERPC] Remove old dcr.S
[POWERPC] Fix SPU coredump code for max_fdset removal
[POWERPC] Fix irq routing on some 32-bit PowerMacs
[POWERPC] ps3: Add vuart support
[POWERPC] Support ibm,dynamic-reconfiguration-memory nodes
[POWERPC] dont allow pSeries_probe to succeed without initialising MMU
[POWERPC] micro optimise pSeries_probe
[POWERPC] Add SPURR SPR to sysfs
[POWERPC] Add DSCR SPR to sysfs
[POWERPC] Fix 440SPe CPU table entry
[POWERPC] Add support for FP emulation for the e300c2 core
[POWERPC] of_device_register: propagate device_create_file return code
[POWERPC] Fix mmap of PCI resource with hack for X
[POWERPC] iSeries: head_64.o needs to depend on lparmap.s
[POWERPC] cbe_thermal: Fix initialization of sysfs attribute_group
[POWERPC] Remove QE header files from lite5200.c
[POWERPC] of_platform_make_bus_id(): make `magic' int
...
Franck Bui-Huu [Wed, 6 Dec 2006 15:48:28 +0000 (16:48 +0100)]
[MIPS] paging_init(): use highend_pfn/highstart_pfn
This patch makes paging_init() use highend_pfn/highstart_pfn globals.
It removes the need of 'high' local which was needed only by HIGHMEM config.
More important perhaps, it fixes a bug when HIGHMEM is set but there's
actually no physical highmem (highend_pfn = 0)
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 11 Dec 2006 15:33:30 +0000 (15:33 +0000)]
[MIPS] Malta: Resurrect MTD support for onboard flash.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 11 Dec 2006 11:54:52 +0000 (11:54 +0000)]
[MIPS] Discard .exit.text and .exit.data at runtime.
While the recent cset
86384d544157db23879064cde36061cdcafc6794 did improve
things it didn't resolve all the problems. So bite the bullet and discard
.exit.text and .exit.data at runtime. Which of course sucks because it
bloats binaries with code that will never ever be used but it's the only
thing that will work reliable as demonstrated by the function sd_major() in
drivers/scsi/sd.c.
Gcc may compile sd_major() using a jump table which it will put into
.rodata. If it also inlines sd_major's function body into exit_sd() which
gcc > 3.4.x does. If CONFIG_BLK_DEV_SD has been set to y we would like ld
to discard exit_sd's code at link time. However sd_major happens to
contain a switch statement which gcc will compile using a jump table in
.rodata on the architectures I checked. So, when ld later discards
.exit.text only the jump table in .rodata with its stale references to
the discard .exit.text will be left which any no antique ld will honor
with a link error.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 11 Dec 2006 04:17:30 +0000 (04:17 +0000)]
[MIPS] IP27: Don't drag <asm/sn/arch.h> into topology.h.
Another way that old SGI types were getting dragged into generic code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 11 Dec 2006 04:07:40 +0000 (04:07 +0000)]
[MIPS] IP27: Move definition of nic_t to its sole user.
This also fixes the duplicate definition of nic_t in the s2io driver.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 11 Dec 2006 04:00:37 +0000 (04:00 +0000)]
[MIPS] IP27: Don't include <asm/sn/arch.h>.
Nothing <asm/sn/arch.h> defines is used.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Mon, 11 Dec 2006 00:43:58 +0000 (00:43 +0000)]
[MIPS] compat.h uses struct pt_regs so needs to include ptrace.h.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Andrew Morton [Tue, 12 Dec 2006 01:24:46 +0000 (17:24 -0800)]
[NETPOLL]: Fix local_bh_enable() warning.
During boot we get:
netconsole: device eth0 not up yet, forcing it
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
WARNING (!__warned) at kernel/softirq.c:137 local_bh_enable()
Call Trace:
[<
ffffffff80235baf>] local_bh_enable+0x41/0xa3
[<
ffffffff8045ab8e>] netpoll_send_skb+0x116/0x144
[<
ffffffff8045b1ee>] netpoll_send_udp+0x263/0x271
[<
ffffffff803d41ec>] write_msg+0x42/0x5e
[<
ffffffff80230c9b>] __call_console_drivers+0x5f/0x70
[<
ffffffff80230d19>] _call_console_drivers+0x6d/0x71
[<
ffffffff802313f0>] release_console_sem+0x148/0x1ec
[<
ffffffff802316ce>] register_console+0x1b1/0x1ba
[<
ffffffff803d4178>] init_netconsole+0x54/0x68
[<
ffffffff802071ae>] init+0x152/0x308
[<
ffffffff804dac8b>] _spin_unlock_irq+0x14/0x30
[<
ffffffff8022c15e>] schedule_tail+0x43/0x9f
[<
ffffffff8020a758>] child_rip+0xa/0x12
Herbert sayeth:
Normally networking isn't invoked with interrupts turned off, but I
suppose we don't have a choice here. This is unique being a place where you
can get called with BH on, off, or IRQs off.
Given that this is only used for printk, the easiest solution is probably
just to disable local IRQs instead of BH.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yoshinori Sato [Tue, 12 Dec 2006 00:11:45 +0000 (09:11 +0900)]
sh: Fixup SH-2 BUG() trap handling.
This adds in support for the BUG() trap on SH-2.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Tue, 12 Dec 2006 00:00:47 +0000 (09:00 +0900)]
sh: Use early_param() for earlyprintk parsing.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Mon, 11 Dec 2006 23:53:29 +0000 (08:53 +0900)]
sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Mon, 11 Dec 2006 23:50:36 +0000 (08:50 +0900)]
sh: Fixup .data.page_aligned.
This had a bogus .data.idt reference, fix it up..
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Mon, 11 Dec 2006 23:49:06 +0000 (08:49 +0900)]
sh: Hook up SH7722 scif ipr interrupts.
Add the SCIF IRQs to the IPR table for SH7722.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Mon, 11 Dec 2006 11:29:28 +0000 (20:29 +0900)]
sh: Fixup sh_bios() trap handling.
This was inadvertently broken when the entry.S code split up,
restore the missing branch and get subsequent traps working
under debug again. This manifested itself as a lockup when
attempting to reload the VBR base.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Mon, 11 Dec 2006 11:28:03 +0000 (20:28 +0900)]
sh: SH-MobileR SH7722 CPU support.
This adds CPU support for the SH7722.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Sat, 9 Dec 2006 00:17:01 +0000 (09:17 +0900)]
sh: Fixup dma_cache_sync() callers.
This now takes a struct device, update all of the callers.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Sat, 9 Dec 2006 00:16:12 +0000 (09:16 +0900)]
sh: Convert remaining remap_area_pages() users to ioremap_page_range().
A couple of these were missed.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Sat, 9 Dec 2006 00:14:35 +0000 (09:14 +0900)]
sh: Fixup kernel_execve() for syscall cleanups.
SH-2 and SH-2A need to use a different syscall base for the trapa
vector than the other parts, so fixup the logic in the kernel_execve()
case.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Fri, 8 Dec 2006 08:46:29 +0000 (17:46 +0900)]
sh: Fix get_wchan().
Some time ago the schedule frame size changed and we failed to reflect
this in get_wchan() at the time. This first popped up as a problem on
SH7751R where schedule_frame ended up being unaligned and generating
an unaligned trap. This fixes it up again..
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Fri, 8 Dec 2006 08:41:43 +0000 (17:41 +0900)]
sh: BUG() handling through trapa vector.
Previously we haven't been doing anything with verbose BUG() reporting,
and we've been relying on the oops path for handling BUG()'s, which is
rather sub-optimal.
This switches BUG handling to use a fixed trapa vector (#0x3e) where we
construct a small bug frame post trapa instruction to get the context
right. This also makes it trivial to wire up a DIE_BUG for the atomic
die chain, which we couldn't really do before.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Jamie Lenehan [Fri, 8 Dec 2006 06:26:15 +0000 (15:26 +0900)]
rtc: rtc-sh: alarm support.
This adds alarm support for the RTC_ALM_SET, RTC_ALM_READ,
RTC_WKALM_SET and RTC_WKALM_RD operations to rtc-sh.
The only unusual part is the handling of the alarm interrupt. If you
clear the alarm flag (AF) while the time in the RTC still matches the
time in the alarm registers than AF is immediately re-set, and if the
alarm interrupt (AIE) is still enabled then it re-triggers. I was
originally getting around 20k+ interrupts generated during the second
when the RTC and alarm registers matches.
The solution I've used is to clear AIE when the alarm goes off and
then use the carry interrupt to re-enabled it. The carry interrupt
will check AF and re-enabled AIE if it's clear. If AF is not clear
it'll clear it and then the check will be repeated next carry
interrupt. This a bit in rtc structure that indicates that it's
waiting to have AIE re-enabled so it doesn't turn it on when it
wasn't enabled anyway.
Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Jamie Lenehan [Fri, 8 Dec 2006 05:49:30 +0000 (14:49 +0900)]
rtc: rtc-sh: fix rtc for out-by-one for the month.
The RMONCNT register, which holds the month in the RTC, takes a value
between 1 and 12 while the tm_mon field in the time structures takes
a value between 0 and 11. This wasn't being taken into account in
rtc-sh resulting in the month being out by one.
eg, on my board during boot the RTC is set to:
RTC is set to Thu Jul 01 09:00:00 1999
but "hwclock -r" immediately after logging in was showing:
Sun Aug 1 09:01:43 1999 0.000000 seconds
Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Yoshinori Sato [Fri, 8 Dec 2006 05:47:02 +0000 (14:47 +0900)]
sh: Kill off unused SE7619 I/O ops.
This can use the generic routines, so kill off the board-specific ones.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Fri, 8 Dec 2006 05:26:19 +0000 (14:26 +0900)]
serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Thu, 7 Dec 2006 11:33:38 +0000 (20:33 +0900)]
sh: Split out atomic ops logically.
We have a few different ways to do the atomic operations, so split
them out in to different headers rather than bloating atomic.h.
Kernelspace gUSA will take this up to a third implementation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Yoshinori Sato [Thu, 7 Dec 2006 10:59:35 +0000 (19:59 +0900)]
sh: Fix Solution Engine 7619 build.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Yoshinori Sato [Thu, 7 Dec 2006 09:07:27 +0000 (18:07 +0900)]
sh: Trivial build fixes for SH-2 support.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Yoshinori Sato [Thu, 7 Dec 2006 09:01:23 +0000 (18:01 +0900)]
sh: IPR IRQ updates for SH7619/SH7206.
This updates the SH7619 and SH7206 code for the IPR IRQ changes.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Stuart Menefy [Thu, 7 Dec 2006 08:48:52 +0000 (17:48 +0900)]
sh: gcc4 symbol export fixups.
gcc 4 for sh changes the names of some compiler intrinsic functions
and adds some additional ones. This patch adds the new ones, and
fixes up various module symbol resolution issues.
Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Thu, 7 Dec 2006 08:27:18 +0000 (17:27 +0900)]
sh: landisk board build fixes.
Get the landisk board building again..
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Jamie Lenehan [Thu, 7 Dec 2006 08:23:50 +0000 (17:23 +0900)]
rtc: rtc-sh: fix for period rtc interrupts.
When testing the per second interrupt support (RTC_UIE_ON/RTC_UIE_OFF)
of the new RTC system it would die in sh_rtc_interrupt due to a null
ptr dereference. The following gets it working correctly.
Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Jamie Lenehan [Thu, 7 Dec 2006 08:23:07 +0000 (17:23 +0900)]
sh: register rtc resources for sh775x.
Register the RTC resources for the sh775x subtype so that the new
generic RTC support in drivers/rtc/rtc-sh.c will work.
Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Yoshinori Sato [Thu, 7 Dec 2006 08:09:46 +0000 (17:09 +0900)]
sh: SH-2 defconfig updates.
This adds a new defconfig for SE7619 and updates SE7206.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Thu, 7 Dec 2006 08:00:32 +0000 (17:00 +0900)]
sh: Add uImage and S-rec generation support.
Add a couple of new targets, both for uImage and S-rec generation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Thu, 7 Dec 2006 04:20:58 +0000 (13:20 +0900)]
sh: push-switch fixups for work_struct API damage.
INIT_WORK() dropped the data arg, so now we have to stash an extra
pointer and backpedal instead.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Thu, 7 Dec 2006 03:43:52 +0000 (12:43 +0900)]
sh: Shut up csum_ipv6_magic() warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Paul Mundt [Thu, 7 Dec 2006 03:43:06 +0000 (12:43 +0900)]
sh: Reworked swap cache entry encoding for SH-X2 MMU.
In the 64-bit PTE case there's no point in restricting the encoding
to the low bits of the PTE, we can instead bump all of this up to
the high 32 bits and extend PTE_FILE_MAX_BITS to 32, adopting the
same convention used by x86 PAE.
There's a minor discrepency between the number of bits used for the
swap type encoding between 32 and 64-bit PTEs, but this is unlikely
to cause any problem given the extended offset.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Simon Horman [Mon, 11 Dec 2006 06:36:18 +0000 (22:36 -0800)]
[IPVS]: Make ip_vs_sync.c <= 80col wide.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Mon, 11 Dec 2006 06:35:24 +0000 (22:35 -0800)]
[IPVS]: Use msleep_interruptable() instead of ssleep() aka msleep()
Dean Manners notices that when an IPVS synchonisation daemons are
started the system load slowly climbs up to 1. This seems to be related
to the call to ssleep(1) (aka msleep(1000) in the main loop. Replacing
this with a call to msleep_interruptable() seems to make the problem go
away. Though I'm not sure that it is correct.
This is the second edition of this patch, which replaces ssleep()
in the main loop for both the master and backup threads, as well
as some thread synchronisation code. The latter is just for thorougness
as it shouldn't be causing any problems.
Signed-Off-By: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralf Baechle [Sun, 10 Dec 2006 21:46:45 +0000 (13:46 -0800)]
[HAMRADIO]: Fix baycom_epp.c compile failure.
Fix foobar in
15b1c0e822f578306332d4f4c449250db5c5dceb and
e8cc49bb0fdb9e18a99e6780073d1400ba2b0d1f patch series.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnaldo Carvalho de Melo [Sun, 10 Dec 2006 18:01:18 +0000 (16:01 -0200)]
[DCCP]: Whitespace cleanups
That accumulated over the last months hackaton, shame on me for not
using git-apply whitespace helping hand, will do that from now on.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Arnaldo Carvalho de Melo [Sun, 10 Dec 2006 17:39:29 +0000 (15:39 -0200)]
[DCCP] ccid3: Fixup some type conversions related to rtts
Spotted by David Miller when compiling on sparc64, I reproduced it here on
parisc64, that are the only platforms to define __kernel_suseconds_t as an
'int', all the others, x86_64 and x86 included typedef it as a 'long', but from
the definition of suseconds_t it should just be an 'int' on platforms where it
is >= 32bits, it would not require all the castings from suseconds_t to (int)
when printking variables of this type, that are not needed on parisc64 and
sparc64.
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:24:57 +0000 (00:24 -0200)]
[DCCP] ccid3: BUG-FIX - conversion errors
This fixes conversion errors which arose by not properly type-casting
from u32 to __u64. Fixed by explicitly casting each type which is not
__u64, or by performing operation after assignment.
The patch further adds missing debug information to track the current
value of X_recv.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:24:33 +0000 (00:24 -0200)]
[DCCP] ccid3: Reorder packet history source file
No code change at all.
This reorders the source file to follow the same order as the corresponding
header file.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:24:11 +0000 (00:24 -0200)]
[DCCP] ccid3: Reorder packet history header file
No code change at all.
To make the header file easier to read, the following ordering is established
among the declarations:
* hist_new
* hist_delete
* hist_entry_new
* hist_head
* hist_find_entry
* hist_add_entry
* hist_entry_delete
* hist_purge
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:14:12 +0000 (00:14 -0200)]
[DCCP] ccid3: Make debug output consistent
This patch does not alter any algorithm, just the debug message format:
* s#%s, sk=%p#%s(%p)#g
* when a statename is present, it now uses %s(%p, state=%s)
* when only function entry is debugged, it adds an `- entry'
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:09:21 +0000 (00:09 -0200)]
[DCCP] ccid3: Perform history operations only after packet has been sent
This migrates all packet history operations into the routine
ccid3_hc_tx_packet_sent, thereby removing synchronization problems
that occur when, as before, the operations are spread over multiple
routines.
The following minor simplifications are also applied:
* several simplifications now follow from this change - several tests
are now no longer required
* removal of one unnecessary variable (dp)
Justification:
Currently packet history operations span two different routines,
one of which is likely to pass through several iterations of sleeping
and awakening.
The first routine, ccid3_hc_tx_send_packet, allocates an entry and
sets a few fields. The remaining fields are filled in when the second
routine (which is not within a sleeping context), ccid3_hc_tx_packet_sent,
is called. This has several strong drawbacks:
* it is not necessary to split history operations - all fields can be
filled in by the second routine
* the first routine is called multiple times, until a packet can be sent,
and sleeps meanwhile - this causes a lot of difficulties with regard to
keeping the list consistent
* since both routines do not have a producer-consumer like synchronization,
it is very difficult to maintain data across calls to these routines
* the fact that the routines are called in different contexts (sleeping, not
sleeping) adds further problems
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:08:09 +0000 (00:08 -0200)]
[DCCP] ccid3: TX history - remove unused field
This removes the `dccphtx_ccval' field since it is nowhere used in the code and
in fact not necessary for the accounting.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:07:37 +0000 (00:07 -0200)]
[DCCP] ccid3: Shift window counter computation
This puts the window counter computation [RFC 4342, 8.1] into a separate
function which is called whenever a new packet is ready for immediate
transmission in ccid3_hc_tx_send_packet.
Justification:
The window counter update was previously computed after the packet was sent. This has
two drawbacks, both fixed by this patch:
1) re-compute another timestamp almost directly after the packet was sent (expensive),
2) the CCVal for the window counter is needed at the instant the packet is sent.
Further details:
The initialisation of the window counter is left in the state NO_SENT, as before.
The algorithm will do nothing if either RTT is initialised to 0 (which is ok) or if
the RTT value remains below 4 microseconds (which is almost pathological).
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:06:32 +0000 (00:06 -0200)]
[DCCP] ccid3: Sanity-check RTT samples
CCID3 performance depends much on the accuracy of RTT samples. If RTT
samples grow too large, performance can be catastrophically poor.
To limit the amount of possible damage in such cases, the patch
* introduces an upper limit which identifies a maximum `sane' RTT value;
* uses a macro to enforce this upper limit.
Using a macro was given preference, since it is necessary to identify the
calling function in the warning message. Since exceeding this threshold
identifies a critical condition, DCCP_CRIT is used and not DCCP_WARN.
Many thanks to Ian McDonald for collaboration on this issue.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:06:01 +0000 (00:06 -0200)]
[DCCP] ccid3: Initialise RTT values
In both the sender and the receiver it is possible that the stored
RTT value is accessed before an actual RTT estimate has been computed.
This patch
* initialises the sender RTT to 0
- the sender always accesses the RTT in ccid3_hc_tx_packet_sent
- the RTT is further needed for the window counter algorithm
* replaces the receiver initialisation of 5msec with 0
- which has the same effect and removes an `XXX'
- the RTT value is needed in ccid3_hc_rx_packet_recv as rtt_prev
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:05:38 +0000 (00:05 -0200)]
[DCCP] ccid: Deprecate ccid_hc_tx_insert_options
The function ccid3_hc_tx_insert_options only does a redundant no-op,
as the operation
DCCP_SKB_CB(skb)->dccpd_ccval = hctx->ccid3hctx_last_win_count;
is already performed _unconditionally_ in ccid3_hc_tx_send_packet.
Since there is further no current need for this function, it is removed
entirely. Since furthermore, there is actually no present need for the
entire interface function ccid_hc_tx_insert_options, it was decided to
remove it also, to clean up the interface.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:05:12 +0000 (00:05 -0200)]
[DCCP]: Warn when discarding packet due to internal errors
This adds a (debug) warning message which is triggered whenever a packet is
discarded due to send failure.
It also adds a conditional, so that an interruption during dccp_wait_for_ccid
is not treated as a `BUG': the rationale is that interruptions are external,
whereas bug warnings are concerned with the internals.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:04:43 +0000 (00:04 -0200)]
[DCCP]: Only deliver to the CCID rx side in charge
This is an optimisation to reduce CPU load. The received feedback is now
only directed to the active CCID component, without requiring processing
also by the inactive one.
As a consequence, a similar test in ccid3.c is now redundant and is
also removed.
Justification:
Currently DCCP works as a unidirectional service, i.e. a listening server
is not at the same time a connecting client.
As far as I can see, several modifications are necessary until that
becomes possible.
At the present time, received feedback is both fed to the rx/tx CCID
modules. In unidirectional service, only one of these is active at any
one time.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:04:16 +0000 (00:04 -0200)]
[DCCP]: Simplify TFRC calculation
In migrating towards using the newer functions scaled_div/scaled_div32
for TFRC computations mapped from floating-point onto integer arithmetic,
this completes the last stage of modifications.
In particular, the overflow case for computing X_calc is circumvented by
* breaking the computation into two stages
* the first stage, res = (s*1E6)/R, cannot overflow due to use of u64
* in the second stage, res = (res*1E6)/f, overflow on u32 is avoided due
to (i) returning UINT_MAX in this case (which is logically appropriate)
and (ii) issuing a warning message into the system log (since very likely
there is a problem somewhere else with the parameters)
Lastly, all such scaling operations are now exported into tfrc.h, since
actually this form of scaled computation is specific to TFRC and not to CCID3.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:03:51 +0000 (00:03 -0200)]
[DCCP]: Debug timeval operations
Problem:
Most target types in the CCID3 code are u32, so subtle conversion errors
can occur if signed time calculations yield negative results: the original
values are lost in the conversion to unsigned, calculation errors go undetected.
This patch therefore
* sets all critical time types from unsigned to suseconds_t
* avoids comparison between signed/unsigned via type-casting
* provides ample warning messages in case time calculations are negative
These warning messages can be removed at a later stage when the code
has undergone more testing.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Gerrit Renker [Sun, 10 Dec 2006 02:03:30 +0000 (00:03 -0200)]
[DCCP] ccid3: Simplify calculation for reverse lookup of p
This simplifies the calculation of a value p for a given fval when the
first loss interval is computed (RFC 3448, 6.3.1). It makes use of the
two new functions scaled_div/scaled_div32 to provide overflow protection.
Additionally, protection against divide-by-zero is extended - in this
case the function will return the maximally possible value of p=100%.
Background:
The maximum fval, f(100%), is approximately 244, i.e. the scaled value of fval
should never exceed 244E6, which fits easily into u32. The problem is the scaling
by 10^6, since additionally R(TT) is in microseconds.
This is resolved by breaking the division into two stages: the first stage
computes fval=(s*10^6)/R, stores that into u64; the second stage computes
fval = (fval*10^6)/X_recv and complains if overflow is reached for u32.
This case is safe since the TFRC reverse-lookup routine then returns p=100%.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / log