[media] gspca_cpia1: Don't allow the framerate divisor to go above 2

Having a framerate divisor of 3 is not really necesarry and leads to
various troubles (frames going missing, compression issues) when allowed.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca: Add new vicam subdriver

This is a complete rewrite of the old v4l1 vicam subdriver, featuring
multiple resolutions, gain + exposure control and still has less code.

Oh and it is a v4l2 driver rather then v4l1 ofcourse :)

Many thanks to Devin Heitmueller <dheitmueller@kernellabs.com> for
donating his 3com homeconnect to me, which made this rewrite possible.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_sn9c20x: Add another MSI laptop to the sn9c20x upside down list

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_sn9c20x: Make buffers slightly larger for JPEG frames

In good lighting conditions (lots of details visible) the current buffers
are sometimes too small.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_sn9c20x: Add LED_REVERSE flag for 0c45:62bb

This fixes the led not working on this camera

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_sn9c20x: Add hflip and vflip controls for the ov7660 sensor

Tested with a camera with usb-id: 0c45:62bb

Also enable dmi based flopped laptop detection for the 0c45:627b ov7660 model.
Some of the MSI laptops with upside down camera have this one instead of the
0c45:624f.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca_sn9c20x: Fix colored borders with ov7660 sensor

Tested with a camera with usb-id: 0c45:62bb

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: relabeling any registers

relabeling any registers

Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - ov519: Add the 800x600 resolution for sensors ov2610/2610ae

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - ov519: Add the sensor ov2610ae

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: The pin S_PWR_DN is inverted for sensor mi0360

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - ov534: Add saturation control for ov767x

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - ov534: Add the webcam 06f8:3002 and sensor ov767x

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - ov534: Use the new control mechanism

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj, zc3xx: Let some bandwidth for audio when USB 1.1

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Set both pins for infrared of mt9v111 webcams

This avoids to define the webcam model.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Same init for all bridges but the sn9c102p

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Simplify GPIO setting when audio present

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Adjust autogain for sensor mt9v111

The gain/expo adjustment was too long.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Fix start sequence of sensor mt9v111

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Update the JPEG quality for best image transfer

During image capture, the filling rate of the isoc packets is computed.
It is then used by a work queue to update the current JPEG quality.

Tested-by: Franck Bourdonnec <fbourdonnec@chez.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Have the same JPEG quality for encoding and decoding

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Better scanning of isochronous packets

A marker 'ff ff 00 c4 c4 96' indicates an end of frame.
It is 62 bytes long and may be splitted on 2 packets.
It contains a flag 'USB full' which indicates that the frame is truncated.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - sonixj: Move the avg lum computation to a separate function

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Remove compatibility layer from multi-planar API documentation

This feature will probably be moved to libv4l2.

Signed-off-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-ctrls: Fix control enumeration for multiple subdevs with ctrl

v4l2-ctl and qv4l2 enumerate controls using V4L2_CTRL_FLAG_NEXT_CTRL,
falling back to the old method if the flag isn't supported.

The v4l2_subdev_queryctrl function will currently handle that flag, but
for the controls of the subdev only. This isn't right, it should refuse
this flag, otherwise v4l2-ctl will only see the controls of the first
subdev.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: properly handle subdev controls

Subdev controls return codes are evil, as they return -EINVAL to mean
both unsupported and invalid arguments. Due to that, we need to use a
trick to identify what controls are supported by a subdev.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: Fix return value for s_ctrl

On some cases, driver returns 1. This should be OK, but qv4l2 is too
strict about return values.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tvp5150: device detection should be done only once

Having the device detection happening at reset is bad, as every time,
it will produce a message like:
tvp5150 2-005c: tvp5150am1 detected.

This only polutes the log and for an accidental kernel hacker, it looks
like a real problem. So, move those printk's to happen during device
probe.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner: Remove remaining usages of T_DIGITAL_TV

A few places used T_DIGITAL_TV internally. Remove the usage of this
obsolete mode mask.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: Don't touch at standby during tuner_lookup

It makes no sense that tuner_lookup would touch at the standby
state. Remove it.

Thanks-to: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: Rearrange some functions to better document

Group a few functions together and add/fix comments for each
block of the driver.

This is just a cleanup patch meant to improve driver readability.
No functional changes in this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: Improve function documentation

This driver is complex, and used by everyone. Better to have it
properly documented.

No functional changes are done in this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: remove usage of DIGITAL_TV

tuner-core has no business to do with digital TV. So, don't use
T_DIGITAL_TV on it, as it has no code to distinguish between
them, and nobody fills T_DIGITAL_TV right.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Remove the remaining usages for T_STANDBY

tda9887 used to use the T_STANDBY type internally, while tea5761
used it to put the device to sleep. Fix the code for it to work
properly with the tuner core changes and remove this flag from
tuner.h.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: Fix a few comments on it

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: dead code removal

Remove the now obsolete set_freq. Also merge set_addr and set_type_addr.

In the past, it used to have two different setup calls, one to set just
the tuner type to any tuner found, and another to set the type only if
the address matches. Those two internal calls were grouped together,
but the functions weren't merged, making the code uglier.

No functional changes are done in this patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: Don't use a static var for xc5000_cfg

A static var is evil, especially if a device has two boards with
xc5000. Instead, just like the other drivers, use stack to store
its config during setup.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: CodingStyle cleanups

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: do the right thing for suspend/resume

Power down tuners at suspend. At resume, if the tuner is in standby,
calls set_mode, that will turn it on and set the latest frequencies.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: Better implement standby mode

In the past, T_STANDBY were used on devices with a separate radio tuner to
mark a tuner that were disabled. With the time, it got newer meanings.

Also, due to a bug at the logic, the driver might incorrectly return
T_STANDBY to userspace.

So, instead of keeping the abuse, just use a boolean for storing
such information.

We can't remove T_STANDBY yet, as this is used on two other drivers. A
latter patch will address its usage outside tuner-core.

Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: Some cleanups at check_mode/set_mode

Properly document those functions and do some cleanups around that.
There's just one behavior change on this patchset: it will now restore
TV frequency when changing from radio to TV mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: Reorganize the functions internally

This is a big patch with no functional changes. It just
rearranges everything inside the driver, and prepares to
break TV and Radio into two separate fops groups.

Currently, it has an heuristics logic to determine if the
call came from radio or video. However, the caller driver
knows for sure, so tuner-core shouldn't try to guess it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: move some messages to the proper place

Move the frequency set debug printk's to the code that actually
are changing it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: remove the legacy is_stereo() call

Nobody is using this legacy call. Just remove it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-core: Remove V4L1/V4L2 API switch

V4L1 was removed. So, the code there is just dead code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx88: Don't allow opening a device while it is not ready

After registering the cdev, it would be possible do have an open on it.
In a matter of fact, some versions of udev do this. So, move registration
to the end and protect it with a mutex.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx88: use unlocked_ioctl for cx88-video.

cx88-video has locks. don't use the locked ioctl version, as
it is not needed.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Add support for PV Xcapture USB

Adds support for Pixelviex Xcapture USB grabber device.
This device has one composite and one s-video entry
only, plus a button.

For now, the button is not supported.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Allow some boards to not use I2C port 3

Some devices don't need to use it. So allow to just disable this logic.
Having it enabled on some devices cause power management to complain,
generating error -71.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Use parameters to describe some board variants

Instead of per-model tests all over the code, use some parameters
at the board entries to describe the model variants for:
- devices with 417 MPEG encoder;
- devices that use external AV;
- devices where vbi VANC endpoint doesn't work;
- devices with xc5000 that require different IF
  initialization (and probably will cover also
  xc3028).
- devices with xceive tuner that require a reset
  during init.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Use a generic check for TUNER_XC5000

The check for xc5000 assumes that the tuner will always
be using the same bus and will have the same address.
As those are configurable via dev->board, it should use,
instead, the values defined there.

Also, a similar type of test will be needed by other
tuners (for example, for TUNER_XC2028)

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx231xx: Simplify interface checking logic at probe

Just a cleanup patch. Removes one indent level by moving
the return -ENODEV to happen before the device register
logic, if the interface is not the audio/video (int 1).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-xc2028: More firmware loading retries

My Hauppauge WinTV HVR-1400 needs sometimes more then only one retry to load the firmware successfully.

Signed-off-by: Alina Friedrichsen <x-alina@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] double mutex lock in drivers/media/radio/si470x/radio-si470x-

KERNEL_VERSION: 2.6.37
common.c in function ssize_t si470x_fops_read.

1. First mutex_lock on &radio->lock in line 441
2. Second in line 462

I think that mutex in line 462 is not needed.

 433static ssize_t si470x_fops_read(struct file *file, char __user *buf,
 434                size_t count, loff_t *ppos)
 435{
....
 441        mutex_lock(&radio->lock);
 442        if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0)
 443                si470x_rds_on(radio);
 444
 445        /* block if no new data available */
 446        while (radio->wr_index == radio->rd_index) {
 447                if (file->f_flags & O_NONBLOCK) {
 448                        retval = -EWOULDBLOCK;
 449                        goto done;
 450                }
 451                if (wait_event_interruptible(radio->read_queue,
 452                        radio->wr_index != radio->rd_index) < 0) {
 453                        retval = -EINTR;
 454                        goto done;
 455                }
 456        }
 457
 458        /* calculate block count from byte count */
 459        count /= 3;
 460
 461        /* copy RDS block out of internal buffer and to user buffer */
 462        mutex_lock(&radio->lock);

Found by Linux Device Drivers Verification Project

Remove second mutex.

Signed-off-by: Alexander Strakh <strakh@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: add/rework reg.defines

Rework registers defines. Add TM6000 specific registers defines.
Add marks and comments for TM6010 specific registers.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cpia2: convert to video_ioctl2

Unable to test this due to lack of hardware.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pwc: convert to video_ioctl2

Tested with a Logitech QuickCam Pro 4000.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pwc: convert to core-assisted locking

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: fix compiler warning

drivers/media/video/vivi.c:1059: warning: this decimal constant is unsigned only in ISO C90

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: convert to the control framework and add test controls

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tvp7002: use control framework

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vpx3220: use control framework

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tvp5150: use the control framework

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tvp514x: use the control framework

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tlv320aic23b: use control framework

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7110: use control framework

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] bt819: use control framework

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] adv7343: use control framework

Also fixed a memory leak in the probe function if an error occurred.
The gain control range was also fixed (a proper range from -64 to 64).

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx18: Use the control framework

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cs5345: use the control framework

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] technisat-usb2: CodingStyle cleanups

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] add support for Encore FM3

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7134: Properly report when a board doesn't have eeprom

When a device is not detected, the driver prints a warning message.
That's ok, except for the fact that, even on newer devices that have
eeprom but aren't yet supported, it prints a message saying that the
device doesn't have eeprom.

Fix it by having a separate message for devices with eeprom, but not
yet known by the driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tuner-simple: add support for Tena TNF5337 MFD

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DocBook/v4l: fix validation errors

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: vivi: port to videobuf2

Make vivi use videobuf2 in place of videobuf.

Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Fix compilation when cxd2099 is not enabled

drivers/media/dvb/ngene/ngene-i2c.o: In function `cxd2099_attach':
ngene-i2c.c:(.text+0x195): multiple definition of `cxd2099_attach'
drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here
drivers/media/dvb/ngene/ngene-cards.o: In function `cxd2099_attach':
ngene-cards.c:(.text+0x116): multiple definition of `cxd2099_attach'
drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here
drivers/media/dvb/ngene/ngene-dvb.o: In function `cxd2099_attach':
ngene-dvb.c:(.text+0x7ad): multiple definition of `cxd2099_attach'
drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] Move CI cxd2099 driver to staging

This driver is abusing the kernel<=>userspace API, due to the lack of a
proper solution for it. A discussion were done at:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg22196.html
But there's not a solution for it yet. So, move the driver to staging, while
we don't have a final solution.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stv090x: 22kHz workaround must also be performed for the 2nd frontend

22kHz workaround must also be performed for the 2nd frontend.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Improved channel initialisation and release

Refactored code for channel initialisation and release:
- Do not create device nodes which are not required.
- Better error handling.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stv090x: Fix losing lock in dual DVB-S2 mode

Do not clear registers ACLC/BCLC in DVB-S2 mode for Cut <= 20.
Otherwise, the demod could lose the lock periodically.
Verified with cineS2 and Duoflex.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stv090x: Fixed typos in register macros

Fixed typos in register macros.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Fix copy-paste error

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] get_dvb_firmware: ngene_18.fw added

Add download link for ngene firmware rev 18.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Enable CI for Mystique SaTiX-S2 Dual (v2)

Enable CI for Mystique SaTiX-S2 Dual (v2).

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Add net device

Add dvb net device.
Note that the physical address must be setup manually.

Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Shutdown workaround

Implement shutdown workaround for some chipsets.

Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: CXD2099AR Common Interface driver

Driver for the Common Interface Controller CXD2099AR.
Supports the CI of the cineS2 DVB-S2.

For now, data is passed through '/dev/dvb/adapterX/sec0':
- Encrypted data must be written to 'sec0'.
- Decrypted data can be read from 'sec0'.
- Setup the CAM using device 'ca0'.

Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Clean-up driver initialisation (part 1)

If tuner initialisation failed, the frontend node was not removed.
When the frontend was opened, a kernel oops occurred...

This is the first step to improve error handling during initialisation.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Support up to 4 tuners

Support up to 4 tuners for cineS2 v5, duoflex & mystique v2.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Fixes for TS input over I2S

Fix TS input over I2S.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ngene: Firmware 18 support

Small modifications for firmware 18.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stv090x: Optional external lock routine

Card driver may supply its own lock routine now.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stv090x: make sleep/wakeup specific to the demod path

The STV0900 features two demodulator paths in one chip. Thus it is not
possible to use the generic power off function of the chip when sending
one of them to standby. The other path will stop working in that case.

The sleep function now switches off functionality specific to the demod
path. The global stuff is only switched off, when both paths are in
sleep mode. The wakeup function always turns on the global functionality
and then works specific to the path.

Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib8000: Fix some wrong alignments

Something went wrong with the alignments for the if clause at line 2113.
Instead of using one tab for alignments, it used 3 tabs, plus one space
character.

WARNING: suspect code indent for conditional statements (8, 33)
+ if ((state->fe[0]->dtv_property_cache.delivery_system != SYS_ISDBT) ||
[...]
+  int i = 80000;

WARNING: suspect code indent for conditional statements (33, 41)
+  for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
+  dib8000_set_bandwidth(state->fe[index_frontend], fe->dtv_property_cache.bandwidth_hz / 1000);

WARNING: suspect code indent for conditional statements (33, 41)
+  do {
+  msleep(20);

WARNING: suspect code indent for conditional statements (41, 49)
+  for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
+  if (((tune_failed >> index_frontend) & 0x1) == 0) {

WARNING: suspect code indent for conditional statements (49, 57)
+  if (((tune_failed >> index_frontend) & 0x1) == 0) {
+  found = dib8000_autosearch_irq(state->fe[index_frontend]);

WARNING: suspect code indent for conditional statements (41, 49)
+  if ((nbr_pending == 0) && (exit_condition == 0))
+  exit_condition = 1;

Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib7000p: Fix 4-byte wrong alignments for some case statements

ERROR: switch and case should be at the same indent
  switch (ch->u.ofdm.transmission_mode) {
[...]
+    case TRANSMISSION_MODE_4K:

WARNING: please, no spaces at the start of a line
+    case TRANSMISSION_MODE_4K:$

ERROR: switch and case should be at the same indent
  switch (ch->u.ofdm.transmission_mode) {
[...]
+    case TRANSMISSION_MODE_4K:

WARNING: please, no spaces at the start of a line
+    case TRANSMISSION_MODE_4K:$

ERROR: switch and case should be at the same indent
  switch (ch->u.ofdm.transmission_mode) {
[...]
+    case TRANSMISSION_MODE_4K:

WARNING: please, no spaces at the start of a line
+    case TRANSMISSION_MODE_4K:$

Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DiBxxxx: Codingstype updates

This patchs fix several conding-style violations.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DiB0700: add support for several board-layouts

This patchs adds support for DiBcom's NIM8096MD, NIM9090M, NIM9090MD,
NIM7090, TFE7090PVR (no diversity) reference designs.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] DiB7090: add support for the dib7090 based

This patch adds support for the SoC DiB7090 DVB-T demodulator and its
melt-in UHF/VHF RF tuner.

Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>