ni52: clean up check586()

take iscp-based testing into helper, kill the loop, stop
wanking with reassignments of priv->iscp

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ni52: clean up initialization of priv

* initialize spinlock once
* check586() used to be done before we'd allocated ->priv; these days
  it's there from the very beginning, so we don't have to play with
  private copy.  Consequently, we don't need to mess with reinitializing
  ->base, etc. afterwards.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ni52: make ->base char __iomem *

... and store the virt address where we map the ->mem_addr, while we
are at it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ni52: kill the second argument of check586(), get rid of bogus pointer

Passing ISA bus address explicitly cast to char * only to cast it back to
unsigned long is dumb; so's passing it at all when it's always dev->mem_start...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ni52: unbreak scp_struct

unsigned short != u8, it's u16...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ni52 trivial iomem annotations

Driver is still broken, though; partially from Alan's checkpatch-induced
fun, partially from layers of ancient mess ;-)

By the end of the series... hell, might be even worth trying to stick
such card into old alpha or ppc with an ISA slot and see if it work -
would be for the first time ever in case of alpha and for the first
time since at least 2.5.3 in case of ppc...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ixgb: remove irq_sem

ixgb can remove irq_sem by auditing all the call sites to make sure
that each of them makes sure the adapter is in the correct state
before re-enabling interrupts.  after doing this to all of our other
drivers it is becoming easier.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

e1000: remove irq_sem

irq_sem was just a hack to prevent interrupts from being enabled
unexpectedly in deep call paths.  Simply finding those call paths and
fixing them by hand results in a driver that behaves as we expect and
doesn't need the atomic at all.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

e1000e: remove irq_sem

irq_sem can safely be removed by auditing all irq.*able sites to
make sure that interrupts don't get enabled unexpectedly when the
interface is down.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

e1000e: remove no longer used e1000e_read_nvm_spi

This function is no longer used now that 82573 uses the eerd
read method as well. Thanks to Adrian Bunk for pointing this out.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ixgb: move externs out of .c files

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ixgb: convert boolean_t to bool

> send me a patch for e1000 and for ixgb and I'll happily apply those :)

boolean_t to bool
TRUE to true
FALSE to false

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ixgb: add explicit state checking

In order to remove the irq_sem code we need to implement strict
adapter state checking to prevent accidental double up or downs
or resets. This code is largely copied from e1000/e1000e.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

e1000: Convert boolean_t to bool

On Thu, 2008-03-06 at 10:07 -0800, Kok, Auke wrote:
> send me a patch for e1000 and for ixgb and I'll happily apply those :)

boolean_t to bool
TRUE to true
FALSE to false
comment typo ahread to ahead

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6.26

rt2x00: Fix in_atomic() usage

rt73usb and rt2500usb used in_atomic to determine
if a configuration step should be rescheduled or not.
Since in_atomic() is not a valid method to determine
if sleeping is allowed we should fix the way this is handled
by adding a new flag to rt2x00.

In addition mark LED class support for the drivers broken
since that also uses the broken in_atomic() method but
so far no solution exists to have LED triggers work only
in scheduled context.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rt2x00: Fix rate detection for invalid signals

It has been observed on rt2500pci hardware that some
frames received with signal 0x0C do not have the OFDM
flag set.

Signals can have 2 meanings:
 1) The PLCP value
 2) The bitrate * 10

For rt2500pci (1) is for frames received with a OFDM rate,
and (2) is for frames received with a CCK rate.
But 0x0C is a invalid bitrate value but is a valid PLCP
value for 54Mbs (obvious OFDM rate).
This means that it is possible that the hardware does not
set the OFDM bit correctly under all circumstances.
This results in rt2x00 failing to detect the rate and
mac80211 triggering a WARN_ON() and dropping the frame.

To bypass this, print a warning when such a frame is received,
and reset the rate to the lowest supported rate for the current band.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

PS3: gelic: Add support for separate cipher selection

From version 2.20 of the PS3 system software, the hypervisor allows
the guest OSes to specify separate cipher for group and pairwise.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

b43: Don't compile N-PHY code when N-PHY is disabled

There's no need to compile the N-PHY support code, when the
N-PHY support is disabled in Kconfig.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: Completing the parameter packaging

This patch completes the changes regarding the packaging of user
parameters.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

ipw2200 annotations and fixes

a) a bunch of printks in error-handling assums that ->status is
big-endian.
b) bitfields trouble
c) missing annotations

NB: a bunch of structs is declared packed for no good reason, AFAICS.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rt2x00: Add dev_flags to rx descriptor

The rxdone_entry_desc structure contains 3 fields
which are always 1 or 0. We can safe 8 bytes by
replacing them with a single dev_flags fields which
contain the flags for those settings.

Additionally we can remove the OFDM flag since it
is no longer used since the introduction of the
SIGNAL_PLCP flag.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: configure default wmm params correctly

Default WMM params have to be set according to beacon/probe response
information prior to authentication (or IBSS start/join); beacon queue
is configured only in IBSS. This does not affect the use of 'real' WMM
params as reported by AP.

Signed-off-by: Vladimir Koutny <vlado@ksp.sk>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: prevent tuning during scanning

Postpone calling ieee80211_hw_config if hardware scanning is active.
This is similar to solution for software scanning where channel setting
is delayed until scan complete.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: tear down of block ack sessions

This patch adds a clean tear down for all block ack sessions if interface
goes down or if a deauthentication is done.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fixing debug prints for AddBA request

This patch also fixes the Rx timer's comments

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: fixing delba debug print

This patch fixes a wrong debug print when receiving delba

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: filter scan results on unusable channels

When you have an AP on channel 13, it will currently often enough
be listed in scan results even when the regulatory domain restricts
to channels 1-11. This is due to channel overlap. To avoid getting
very strange failures, don't show such APs in the scan results. The
failure mode will now go from "I can see the AP but not associate"
to "I can't see the AP although I know it's there" which is easier
to debug.

This problem was first really noticed by Jes Sorensen.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: use ieee80211_get_channel

Use the new ieee80211_get_channel() function instead of open-coding it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

wireless: add wiphy channel freq to channel struct lookup helper

Add ieee80211_get_channel() which gets you a channel struct for a
specific wiphy if that channel is present in that wiphy.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: move host command sending functions to core module

1. Host command sending functions moved from iwl4965-base.c to iwl-hcmd.c
in iwlcore module
2. enqueue_hcmd function currently stays in iwl4965-base.c. It is invoked
   through the new 'utils' field in priv's ops.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: rename iwl4965_get_channel_info to iwl_get_channel_info

iwl4965_get_channel_info was moved to iwlcore module
4965 needs to be stripped off

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: iwl3945 remove 4965 commands

This patch removes 4965 host commands from iwl-3945-commands.h

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi-2.6: enables RX TKIP decryption in HW

This patch enables RX TKIP decryption in HW.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi-2.6: enables HW TKIP encryption

This patch add support for TKIP encryption (TX) in HW.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: allows driver to request a Phase 1 RX key

This patch makes mac80211 able to send a phase1 key for TKIP
decryption.
This is needed for drivers that don't do the rekeying by themselves
(i.e. iwlwifi). Upon IV16 wrap around, the packet is decrypted in SW,
if decryption is ok, mac80211 calls to update_tkip_key  with a new
phase 1 RX key.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

mac80211: get a TKIP phase key from skb

This patch makes mac80211 able to compute a TKIP key from an skb.
The requested key can be a phase 1 or a phase 2 key.
This is useful for drivers who need to provide tkip key to their
HW to enable HW encryption.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi-2.6: RX status translation to old scheme

This patch adds translation for the RX status of an incoming packet.
The incoming status has to be translated to the old scheme in order to know
if the decryption has been done, MIC failure has occured, TTAK is valid etc...
This translation is mandatory for all RX packets when using 5300 and for
all HT packets using 4965.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi-2.6: Cleans up set_key flow

This patch cleans up the set_key flow. Rxon with hw encryption bit set is
not sent upon each call to set_key. Separation is made between global key
(WEP) and dynamic key (TKIP + CCMP and WEP in some cases).

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: Probe Flow - Extracting hw and priv init

1. Extracting hw and priv initialization from probe function.
2. Moving some initialization functions to core module.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: Probe Flow - Performing allocation in a separate function

Performing allocation in a separate function (previously handled in
'probe')

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: Packing all 4965 parameters

This patch defines a package struct for iwlwifi parameters, and uses a
single instance of this struct to group all iwl4965 module parameters
together.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: Re-ordering probe flow (4965)

This patch re-orders the iwl4965_pci_probe function.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: remove macros containing offsets from eeprom struct

A user needing to access these fields can use offsetof() for
access. The comments still contain the offset to assist with
debugging.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: store rssi as an u32

Don't store an (hardware base) u8 value in bss_descriptor, but just an
unsigned int (RSSI is really unsigned). Compilers generate more efficent
code for ints than for bytes.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: remove lots of unused stuff

This removes many unused function parameters as well as some not-implemented
functions, e.g. CMD_802_11_GET_STATS. The silly lbs_set_cmd_ctrl_node()
function is now also gone.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: misc power saving adjusts

* firmware for the CF card supports power saving
* the driver currenly only accept "iwconfig ethX power on|off", so
  I fixed what the range wext ioctl reports.
* initialize value/flags in lbs_get_power()
* get rid of unused parameter psmode in lbs_ps_confirm_sleep()
* some minor debug output tweaks

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: convert GET_LOG to a direct command

Now uses __lbs_cmd() to get the "log" (it's actually more a snapshot of
various counters, not a sequential log). Besides the "mechanical" convertion
the patch add the following logical changes:

* Removes the priv->logmsg variable, it was only used in one place anyway,
  also don't blindly get the counters when associating. Getting the
  counters then the user asks via WEXT for them is good enought.
* don't set wstats.discard.fragment with log.rxfrag, because the latter is
  a counter for successfully received packets, not for fragmented packets.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: fix scheduling while atomic bug in CMD_MAC_CONTROL

The old code incorrectly used lbs_cmd_with_response() and now uses
lbs_cmd_async().

While there I noticed that there is no real useful return values for
asynchronous command functions, so I made the function "void".

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: make a handy lbs_cmd_async() command

This uses a static lbs_cmd_async_callback function, which is a
noop. Just setting the callback argument to __lbs_cmd_async()
to NULL won't work, because then the cmdnode wouldn't be
released.

This also makes __lbs_cmd_async() a static method, which is
now only used by lbs_cmd() and lbs_cmd_async().

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: Add debugfs to iwl core

This patch adds debugfs support to iwl core
currently only iwl4965 is supported

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: Add TX/RX statistcs to driver

This patch supports collecting of TX and RX statistics in the driver.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: rename struct iwl4965_priv to struct iwl_priv

This patch renames iwl4965_priv to iwl_priv. iwl_priv  will
be shared by more hw.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: rename iwl-4965-debug.h back to iwl-debug.h

This patch removes iwl-4965-debug.h to iwl-debug.h
It will be used by more NICs

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iwlwifi: Bug fix, CCMP with HW encryption with AGG

This patch fixes a bug in security. Enables CCMP HW encryption with
aggregations.

Signed-off-by: Max Stepanov <max.stepanov@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: remove some unused commands

Neither CMD_802_11_PAIRWISE_TSC nor CMD_802_11_GROUP_TSC is used or
documented. It might have something to do with TKIP sequence counters,
but that's just an educated guess. Remove all occurences of them.

CMD_CODE_DNLD is also neither used nor documented.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: rename packetfilter to mac_control

The CMD_MAC_CONTROL can be used for other things than just filtering
packets, e.g. to enable and disable WMM. This uses the same term mac_control
for the define, the function and the shadow value in struct lbs_private.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

libertas: convert CMD_MAC_CONTROL to a direct command

convert CMD_MAC_CONTROL to a direct command

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

[IPV6]: Support Source Address Selection API (RFC5014).

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Use bitfields for hop_limit and mcast_hops.

Save some bits for future extensions.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Optimize hop-limit determination.

Last part of hop-limit determination is always:
    hoplimit = dst_metric(dst, RTAX_HOPLIMIT);
    if (hoplimit < 0)
        hoplimit = ipv6_get_hoplimit(dst->dev).

Let's consolidate it as ip6_dst_hoplimit(dst).

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6]: Convert cork.hop_limit and cork.tclass into u8 instead of int.

Values of those fields are always between 0 and 255 (inclusive),
so use u8 and save some memory on 32bit systems.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV4,IPV6]: Share cork.rt between IPv4 and IPv6.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[IPV6] ADDRCONF: Clean-up ipv6_dev_get_saddr().

old:
|    text    data     bss     dec     hex filename
|   28599    1416      96   30111    759f net/ipv6/addrconf.o

new:
|    text    data     bss     dec     hex filename
|   28007    1416      96   29519    734f net/ipv6/addrconf.o

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[XFRM] MIP6: Fix address keys for routing search.

Each MIPv6 XFRM state (DSTOPT/RH2) holds either destination or source
address to be mangled in the IPv6 header (that is "CoA").
On Inter-MN communication after both nodes binds each other,
they use route optimized traffic two MIPv6 states applied, and
both source and destination address in the IPv6 header
are replaced by the states respectively.
The packet format is correct, however, next-hop routing search
are not.
This patch fixes it by remembering address pairs for later states.

Based on patch from Masahide NAKAMURA <nakam@linux-ipv6.org>.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[XFRM] IPV6: Optimize __xfrm_tunnel_alloc_spi().

| % size old/net/ipv6/xfrm6_tunnel.o new/net/ipv6/xfrm6_tunnel.o
|    text    data     bss     dec     hex filename
|    1606      40    2080    3726     e8e old/net/ipv6/xfrm6_tunnel.o
|    1574      40    2080    3694     e6e new/net/ipv6/xfrm6_tunnel.o

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[XFRM] IPV6: Optimize xfrm6_input_addr().

| % size old/net/ipv6/xfrm6_input.o new/net/ipv6/xfrm6_input.o
|    text    data     bss     dec     hex filename
|    1026       0       0    1026     402 old/net/ipv6/xfrm6_input.o
|     947       0       0     947     3b3 new/net/ipv6/xfrm6_input.o

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[XFRM] IPV6: Use distribution counting sort for xfrm_state/xfrm_tmpl chain.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

[NETNS]: Enable TCP/UDP/ICMP inside namespace.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Allow to create sockets in non-initial namespace.

Allow to create sockets in the namespace if the protocol ok with this.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Drop packets in the non-initial namespace on the per/protocol basis.

IP layer now can handle multiple namespaces normally. So, process such
packets normally and drop them only if the transport layer is not
aware about namespaces.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Process netfilter hooks in initial namespace only.

There were no packets in the namespace other than initial
previously. This will be changed in the neareast future. Netfilters
are not namespace aware and should be processed in the initial
namespace only for now.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Process INET socket layer in the correct namespace.

Replace all the reast of the init_net with a proper net on the socket
layer.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Process IP layer in the context of the correct namespace.

Replace all the rest of the init_net with a proper net on the IP layer.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Add namespace parameter to ip_cmsg_send.

Pass the init_net there for now.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Add namespace parameter to ip_options_get(...).

Pass the init_net there for now.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Add namespace parameter to ip_options_compile.

ip_options_compile uses inet_addr_type which requires a namespace. The
packet argument is optional, so parameter is the only way to obtain
it. Pass the init_net there for now.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: /proc/net/arp namespacing.

Seqfile operation showing /proc/net/arp are already namespace
aware. All we need is to register this file for each namespace.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Process ARP in the context of the correct namespace.

Get namespace from a device and pass it to the routing engine. Enable
ARP packet processing and device notifiers after that.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS]: Minor information leak via /proc/net/ptype file.

This file displays the registered packet types, but some of them
(packet sockets creates such) can be bound to a net device and showing
them in a wrong namespace is not correct.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][UDP-Lite]: Register /proc/net/udplite(6) in a namespace.

UDP-Lite sockets are displayed in another files, rather than
UDP ones, so make the present in namespaces as well.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[UDP-Lite]: Clean up proc creation a bit.

Just introduce a helper to remove ifdefs from inside the
udplite4_register function. This will help to make the next patch
nicer.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][TCP]: Register /proc/net/tcp in a namespace.

After the commit f40c8174d3c21bf178283f3ef3aa8c7bf238fdec ([NETNS][IPV4]
tcp - make proc handle the network namespaces) it is now possible to make
this file present in newly created namespaces.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NETNS][UDP]: Register /proc/net/udp in a namespace.

After the commit a91275eff43a527e1a25d6d034cbcd19ee323e64 ([NETNS][IPV6]
udp - make proc handle the network namespace) it is now possible to make
this file present in newly created namespaces.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of ../net-2.6/

Conflicts:

net/ipv6/ndisc.c

[CASSINI]: Use shorter list_splice_init() macro for brevity.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: Remove redundant wrapper functions.

sctp_datamsg_free and sctp_datamsg_track are just aliases for
sctp_datamsg_put and sctp_chunk_hold, respectively.

Saves 32 Bytes on x86.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SCTP]: Replace char msg[] with static const char[].

133886    2004     220  136110   213ae sctp.new/sctp.o
134018    2004     220  136242   21432 sctp.old/sctp.o

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

fib_trie: print information on all routing tables

Make /proc/net/fib_trie and /proc/net/fib_triestat display
all routing tables, not just local and main.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[AF_PACKET]: Remove unused variable.

Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[TCP]: Shrink syncookie_secret by 8 byte.

the first u32 copied from syncookie_secret is overwritten by the
minute-counter four lines below.  After adjusting the destination
address, the size of syncookie_secret can be reduced accordingly.

AFAICS, the only other user of syncookie_secret[] is the ipv6
syncookie support.  Because ipv6 syncookies only grab 44 bytes from
syncookie_secret[], this shouldn't affect them in any way.

With fixes from Glenn Griffin.

Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Glenn Griffin <ggriffin.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: include/linux/udp.h - remove duplicate include

Remove duplicate #include <linux/types.h>
Combine #ifdef __KERNEL__ blocks

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: include/linux/igmp.h - remove duplicate include

Removed duplicate #include <linux/skbuff.h>
Combined #ifdef __KERNEL__ blocks

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: include/linux/atalk.h - remove duplicate include

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: include/net/route.h - remove duplicate include

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix "too many events" situation

HTB is event driven algorithm and part of its work is to apply
scheduled events at proper times. It tried to defend itself from
livelock by processing only limited number of events per dequeue.
Because of faster computers some users already hit this hardcoded
limit.

This patch limits processing up to 2 jiffies (why not 1 jiffie ?
because it might stop prematurely when only fraction of jiffie
remains).

Signed-off-by: Martin Devera <devik@cdi.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Remove unused code in ndisc_send_redirect().

This patches removes unused code in ndisc_send_redirect() method in
net/ipv6/ndisc.c.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

connector: convert to single-threaded workqueue

From: Evgeniy Polyakov <johnpol@2ka.mipt.ru>

We don't need one cqueue thread for each CPU.  cqueue is used for
receiving userspace datagrams, which are very rare and thus will
happily live with a single queue.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ATM]: When proc_create() fails, do some error handling work and return -ENOMEM.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[SUNGEM]: Fix NAPI assertion failure.

As reported by Johannes Berg:

I started getting this warning with recent kernels:

[  773.908927] ------------[ cut here ]------------
[  773.908954] Badness at net/core/dev.c:2204
 ...

If we loop more than once in gem_poll(), we'll
use more than the real budget in our gem_rx()
calls, thus eventually trigger the caller's
assertions in net_rx_action().

Subtract "work_done" from "budget" for the second
arg to gem_rx() to fix the bug.

Signed-off-by: David S. Miller <davem@davemloft.net>