staging:wilc1000:wilc_sdio.c Aligns code match open parenthesis

Fixes checkpatch CHECK: Alignment should match open parenthesis

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:wilc_debugfs.c Removes multiple blank lines

Fixes checkpatch CHECK: Please don't use multiple blank lines

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:wilc_debugfs.c Aligns code to match open parenthesis

Fixes checkpatch CHECK: Alignment should match open parenthesis

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:linux_wlan.c Align code to match open parenthesis

Fixes checkpatch CHECK: Alignment should match open parenthesis

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wilc1000:host_interface.c Added braces {} on else statemement

Fixes checkpatch warning: braces {} should be used on all arms of
this statement

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:wlan-ng:cfg80211.c Aligned code with open parenthesis

Fixed Alignment should match open parenthesis checkpatch CHECK.

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl8192e: Remove NULL test before vfree

vfree frees the virtually continuous block of memory beginning at addr.
If addr is NULL, no operation is performed. So, NULL test is not needed
before vfree.

Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8188eu: include: wifi: Removed unnecessary defined macros

Removed macros not in use.

Signed-off-by: Kartikey Singh <dr.kartikeynrc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: staging: rtl8192e: style fix, octal file permissions

Changed file permissions to octal.
Found with checkpatch.

Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:mac.c Aligned to match open parenthesis

Fixes checkpatch warning: Alignment should match open parenthesis

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Fix sparse warnings about endianness

Fixed sparse warnings about endianness. E.g.:

warning: cast to restricted __le16

Signed-off-by: Eric Salem <ericsalem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl: fix possible NULL pointer dereference

gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with
a destination argument that an earlier function call may have set to NULL:

staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr':
staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull]
staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr':
staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull]

I'm fixing this by adding a NULL pointer check and returning failure
from the function, which is hopefully already handled properly.

This seems to date back to when the drivers were originally added,
so backporting the fix to stable seems appropriate. There are other
related realtek drivers in the kernel, but none of them contain a
function with a similar name or produce this warning.

Cc: stable@vger.kernel.org
Fixes: 1cc18a22b96b ("staging: r8188eu: Add files for new driver - part 5")
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Removed multiple white lines.

Remove one unnecessary white line.

Signed-off-by: Javier Rodriguez <jrodbar@yahoo.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Add character '*' in all lines of the block comments.

Correct code style error. Add a character in every line of the
comment block.

Signed-off-by: Javier Rodriguez <jrodbar@yahoo.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: media: davinci_vpfe: style fix, using octal file permissions

Change file permissions to octal style.
Found using checkpatch.

Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Fix brace style issue in ks_wlan_net.c

This change fixes a checkpatch error for "that open brace { should be
on the previous line" as well as a related spacing warning.

Signed-off-by: David Wittman <dwittman@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rts5208: fix endianness handling

'cb' and 'sgb' were assigned __le values but were not marked as such,
this fixes the following sparse warnings:

drivers/staging/rts5208/rtsx_transport.c:220:34: warning: incorrect type in assignment (different base types)
drivers/staging/rts5208/rtsx_transport.c:220:34:    expected unsigned int [unsigned] [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:220:34:    got restricted __le32 [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:319:44: warning: incorrect type in assignment (different base types)
drivers/staging/rts5208/rtsx_transport.c:319:44:    expected unsigned long long [unsigned] [long] [long long] [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:319:44:    got restricted __le64 [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:319:44: warning: incorrect type in assignment (different base types)
drivers/staging/rts5208/rtsx_transport.c:319:44:    expected unsigned long long [unsigned] [long] [long long] [usertype] <noident>
drivers/staging/rts5208/rtsx_transport.c:319:44:    got restricted __le64 [usertype] <noident>

Signed-off-by: Omri Arad <omriarad3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vme: vme_user.c: fix warning 'line over 80 characters'

Removed checkpatch.pl warning 'line over 80 characters' by inserting a
linebreak in the comment line 50.

Signed-off-by: Philip Thiemann <philip.thiemann@fau.de>
Signed-off-by: Fabian Arnold <fabian.arnold@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: Fix mismatch between types used in sizeof operator

Fixed mismatch between types used in sizeof operator.

Signed-off-by: Eric Salem <ericsalem@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: fix checkpatch unsigned warnings

Fix checkpatch warnings for parameter type unsigned in greybus.
Note that this patch does not fix all checkpatch warnings for the
affected files.

Signed-off-by: Christian Bewermeyer <christian.bewermeyer@fau.de>
Signed-off-by: Roman Sommer <roman.sommer@fau.de>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: fix checkpatch braces not necessary warning

Fix the following warnings:
braces {} are not necessary for any arm of this statement

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: loopback_test: fix checkpatch bad function definition error

Fix the following Errors:
Bad function definition - void abort() should probably be void abort(void)

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: greybus: style fix, permissions as octal

Changed permissions to be in octal style.
Found by checkpatch.

Signed-off-by: Derek Robson <robsonde@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: silence a shift wrapping warning

"svcpt->scp_hist_seq" is a u64 so static checkers complain that 1U
should be 1ULL.  I looked at REQS_SEQ_SHIFT() a little and it seems to
be capped by the number of CPUs online and the amount of memory, but I
think it could go above 32 possibly.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:main_usb.c Removed un-needed blank lines

Fixed the following checkpatch warnings by deleting blank lines
Blank lines aren't necessary before a close brace '}'
Blank lines aren't necessary after an open brace '{'
Please don't use multiple blank lines

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:main_usb.c Aligned code to match open parenthesis

Fixed Alignment should match open parenthesis from checkpatch

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:mac.c Aligned code to match open parenthesis

Fixed Alignment should match open parenthesis checkpatch CHECK

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:vt6656:key.c Aligned code with open parenthesis

Fixed Alignment should match open parenthesis checkpatch CHECK

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Fix space issues

This fixes the space coding styles issues complained by checkpatch.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Fix indentation

This should fix the indentation issues found by checkpatch.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Drop vchiq_2835.h

There is no need for a vchiq_2835.h with its 2 local defines.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Improve readability of kthread names

This patch tries to make the kernel thread names of vchiq a little
bit more self explaining and look closer to the existing ones:

slot handler: VCHIQ-%d -> vchiq-slot/%d
recycle thread: VCHIQr-%d -> vchiq-recy/%d
sync thread: VCHIQs-%d -> vhciq-sync/%d
keep-alive thread: VCHIQka-%d -> vchiq-keep/%d

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Use preferred kernel types

This patch fixes issues reported by checkpatch.pl about preferred
kernel types.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_core: make local spinlock static

The quota_spinlock is only local. So make it static.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_core: remove unused variable type

This variable is assigned a value, but never used. So remove it.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: make local functions static

The functions vchiq_dump_shared_state() and vchiq_is_connected() are only
used locally. So make them static.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vchiq_arm: remove vchiq_platform_check_resume

This function is never used, so we could remove it.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fixed 'braces are not necessary for single statement blocks'.

Fixed checkpatch.pl warnings in rtl8188eu module core folder files.

Signed-off-by: Yamanappagouda Patil <goudapatilk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:sm750fb:ddk750_chip.c removes un-necessary blank lines

Fixes checkpatch warning - Please don't use multiple blank lines

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:sm750fb:ddk750_chip.c Adds braces to last arm of statement

Fixes absence of braces on last arm of statement, identified by
checkpatch

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u:r819xU_cmdpkt.c Removes un-necessary blank lines

Fixes checkpatch.pl warning - Blank lines aren't necessary before a
close brace '}' & Please don't use multiple blank lines

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8192u:r819xU_cmdpkt.c Fix Alignment should match open parenthesis

Fixes Alignment should match open parenthesis in checkpatch

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: olpc_dcon: olpc_dcon_xo_1_5: Remove multiple blank lines.

This issue is caught by checkpatch.pl and is related to the following
warning:
- CHECK: Please don't use multiple blank lines

Signed-off-by: Emmanuil Chatzipetru <chatzi.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: olpc_dcon: olpc_dcon: Fix spaces between operator and variables.

This issue is caught by checkpatch.pl and is related to the following
warning:
- CHECK: spaces preferred around that '/' (ctx:VxV)

Signed-off-by: Emmanuil Chatzipetru <chatzi.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: olpc_dcon: olpc_dcon_xo_1_5: Remove redundant return statement.

dcon_was_irq(); should return a boolean value if PMIO_Rx50[6] is either
set or unset, which is evaluated in the first return statement. Therefore,
the following return statement is redundant and thus, removed.

Signed-off-by: Emmanuil Chatzipetru <chatzi.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: olpc_dcon: olpc_dcon: Fix open parenthesis alignment.

This issue is caught by checkpatch.pl and is related to the following
warning:
- CHECK: Alignment should match open parenthesis

Signed-off-by: Emmanuil Chatzipetru <chatzi.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix checkpatch 80 characters warning

Fix the following warnings:
line over 80 characters

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix checkpatch multiple blank lines check

Fix the following checks:
Please don't use multiple blank lines

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: comedi_fops: Remove unused stat.h header

Unused after commit 6e3029397698 ("staging: comedi: comedi_fops:
coding style fixes") - Fixed coding style in comedi_fops.c
Symbolic to octal permission.

Anyway it's included in module.h

Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: comedi_fops: Remove unused vmalloc.h header

Unused after commit d18431325be0 ("staging: comedi:
deprecate loading firmware with comedi_config").

Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: comedi_fops: Remove redundant init.h header

After commit 0fd972a7d91d ("module: relocate module_init
from init.h to module.h"), including module.h will do and
init.h is also thrown in.

Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: comedi_fops: Remove unused kmod.h header

Unused after commit f30f2c2d417b ("staging: comedi:
remove check for CONFIG_KMOD").

Anyway it's included in module.h

Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: use pci_id_table 'driver_data'

The driver's COMEDI "auto-attach" handler `db2k_auto_attach()` calls
`db2k_find_boardinfo()` to find an element of our board information
array `db2k_boardtypes[]` that matches the probed PCI device.  The
driver's PCI device table matches several boards in the DaqBoard/2000
series that match a single PCI vendor and device ID combination.
`db2k_find_boardinfo()` uses the probed PCI device's subvendor and
subdevice IDs to find the matching board information, returning `NULL`
for no match.

Change the driver's PCI device table `db2k_pci_table[]` to match
supported PCI vendor, device, subvendor and subdevice IDs, and set the
`.driver_data` member of each element to the index of the matching
element of `db2k_boardtypes[]`.  That index gets passed through to the
COMEDI auto-attach handler `db2k_auto_attach()`.  Use it to index
directly into `db2k_boardtypes[]` instead of calling
`db2k_find_boardinfo()` to find the match.
Use array index designators in the initializer of `db2k_boardtypes[]`.
Use enumerated constants defined by new type `enum db2k_boardids` to
name the board type indices.

The `id` member of `struct db2k_boardtype` is no longer used, so remove
it.  Also remove the subdevice ID macros `DB2K_SUBSYSTEM_IDS2` and
`DB2K_SUBSYSTEM_IDS4` as the subdevice IDs are now specified as numbers
in the PCI device table.  Remove `db2k_find_boardinfo()` as it is no
longer used.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: change COMEDI device names

The COMEDI device name strings are currently set to "ids2" for the
DaqBoard/2000, and to "ids4" for the DaqBoard/2001.  Change them to
"daqboard2000" and "daqboard2001" respectively.  (The COMEDI driver name
string is also "daqboard2000".)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: support 4 AO channels

The driver supports DaqBoard/2000 and DaqBoard/2001. DaqBoard/2000 has 2
AO channels, but DaqBoard/2001 has 4 AO channels.  The driver currently
only supports 2 AO channels, but supporting 4 channels is just a case of
setting the `n_chan` member of the COMEDI subdevice to 4 instead of 2.

Add a new boolean flag member `has_2_ao` to `struct db2k_boardtype` to
be set to `true` if the board only has 2 AO channels.  Set this to
`true` in the element of `db2k_boardtypes[]` that corresponds to the
DaqBoard/2000.  Use it in `db2k_auto_attach()` to initialize the number
of AO channels to 2 or 4, as appropriate.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: use designated initializers

Replace the undesignated initializers for each element of
`db2k_boardtypes[]` with an equivalent designated initializer for ease
of future maintenance.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: use shorter, consistent prefix

Use a consistent prefix of `db2k_` or `DB2K_` for identifiers.  The
existing prefixes `DAQBOARD2000_` and `daqboard2000_` are a bit on the
lengthy side.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: remove unused 'card' member

The `card` member of `struct daqboard2000_private` and the enumerated
constant `card_daqboard_2000` are not used.  Remove them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: check CPLD status before writing firmware data

According to an old GPL'ed driver at
<ftp://ftp.mccdaq.com/downloads/iotech_software/DaqBoard_1000_2000_Series/Linux_driver_kernelv2.4.x/>,
The CPLD status register can be checked to make sure that it is ready to
accept the next 16-bit word of FPGA firmware data, but that doesn't work
on older versions of the CPLD, where a simple delay should be used
between successive writes.  The current version of the Comedi driver
just uses a delay between successive writes.  Change it to check for the
newer CPLD in the `daqboard2000_load_firmware()`, and change the
firmware word writing function `daqboard2000_write_cpld()` to wait for
the status bit (`DB2K_CPLD_STATUS_TXREADY`, previously called
`DB2K_CPLD_TXDONE`) to be set for newer CPLD, or just delay for older CPLD.
Return an error if it times out waiting for the status bit.

The wait for the `DB2K_CPLD_STATUS_TXREADY` status bit to be set is
performed by new function `daqboard2000_wait_cpld_txready()`, which
returns 0 if the status bit is set within 100 microseconds, or
`-ETIMEDOUT` if not.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: check result of FPGA programming

According to an old, GPL'ed Linux driver at
<ftp://ftp.mccdaq.com/downloads/iotech_software/DaqBoard_1000_2000_Series/Linux_driver_kernelv2.4.x/>,
after programming the FPGA, the General Purpose Input (USERI) of the PLX
PCI-9080 should go high shortly after a valid FPGA bitstream has been
loaded.  Add a new function `daqboard2000_wait_fpga_programmed()` to
wait for that, performing up to 200 checks over a 20 ms period (this is
loosely based on `pollFPGADone()` in the above-mentioned old driver).
Return 0 if the FPGA appears to have loaded successfully, or
`-ETIMEDOUT` if it runs out of checks.  Call it from the firmware
loading callback `daqboard2000_load_firmware()` after writing the
firmware to the FPGA to check it is programmed successfully.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: change daqboard2000_write_cpld() return value

`daqboard2000_write_cpld()` currently returns 1 on success, or 0 on
failure.  Change it to return 0 on success, or `-EIO` on failure.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: replace daqboard2000_poll_cpld()

`daqboard2000_poll_cpld()` waits for a specified status bit in the CPLD
status register to be set, giving up after 50 tries over a period of
about 5 milliseconds.  It returns 1 if the status bit is set, otherwise
0.  It is only ever called to check the "INIT" status bit.  Replace it
with new function `daqboard2000_wait_cpld_init()`, which returns 0 if
the "INIT" status bit becomes set within 50 tries, or `-ETIMEDOUT` if
not set within 50 tries.  The firmware loading callback
`daqboard2000_load_firmware()` may return the error result from
`daqboard2000_wait_cpld_init()` if it has used up all its firmware
loading attempts and that was the last error.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: check firmware length

Firmware files for DAQBoard/2000 have a header, which is skipped,
followed by a sequence of FPGA configuration bytes to be programmed in
pairs.  The FPGA configuration bytes start with the sequence 0xff, 0x20.

Make the firmware loading callback function
`daqboard2000_load_firmware()` return an error `-EINVAL` if the FPGA
start sequence is not found, or the remaining length is not a multiple
of 2.

The firmware loading callback tries to program the FPGA up to 3 times
until it succeeds or it has tried too many times.  Currently, it
searches for the FPGA start sequence in the firmware data each time
through the retry loop.  Change it to adjust the start position and
length before entering the loop.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: use type 'u16' for CPLD data and status

The CPLD status and data registers used to load firmware are 16 bits
wide.  Use the type `u16` to represent data and status values instead of
`int`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: define macros for CPLD registers

The Daqboard/2000 uses a write-only data register and a read-only status
register in a pre-programmed CPLD device to program the main firmware on
the board.  Both registers are at offset 0x1000 from PCI BAR 2.  Define
macros for the register offsets.  Rename the existing macros for the
status register values for consistency.  (Two status bits are defined,
but the driver code only seems to use one of them.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: daqboard2000: use macros from "plx9080.h"

The Daqboard/2000 uses a PLX PCI-9080 chip to interface with the PCI
bus.  The "daqboard2000" driver uses the PCI-9080 "CNTRL" register to
perform various tasks, but defines its own macros for the register
values.  Use the macros from "plx9080.h" instead.  The various functions
that change the CNTRL register just wiggle individual bits up and down,
but they ignore the current register value - the old macros defined the
full value to be written to the register.  Change them to read and
modify the register value.

Also remove a read of the CNTRL register in `daqboard2000_auto_attach()`
where the value is just thrown away, as it seems to serve no purpose
there (such as flushing PCI writes).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: remove unnecessary blank lines

checkpatch.pl complained about two unnecessary blank lines after an
opening '{' in prism2mib.c. Those were removed in order to get rid
of those warnings.

There are more issues pointed out by checkpatch.pl. Those require
additional work to be done.

Signed-off-by: Markus Buettner <markus.buettner@fau.de>
Signed-off-by: Artur Wasinger <artur.wasinger@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: speakup: style fix, octal file permissions

Changed file permission to octal style,
Can't use __ATTR_RW() as the handler is in standard format.
Found using checkpatch

Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Connect to highest RSSI value for required SSID

Connect to the highest rssi with the required SSID in the shadow
table if the connection criteria is based only on the SSID.
For the first matching SSID, an index to the table is saved.
Later the index is updated if matching SSID has a higher
RSSI value than the last saved index.

However if decision is made based on BSSID, there is only one match
in the table and corresponding index is used.

changes in v2:
initialize sel_bssi_idx to UINT_MAX.
Combine two checks for identifying
sel_bssi_idx value for a SSID.

Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix checkpatch block comments warning

Fix the following warnings:
Block comments should align the * on each line

Signed-off-by: Abdul Rauf <abdulraufmujahid@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: unisys: visorbus: visorchipset.c: style fix

Changed file permissions to octal sytle.
Found using checkpatch.

Acked-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: unisys: visorbus: visorbus_main.c: fixed style

Changed file permissions to octal sytle.
Found using checkpatch.

Acked-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove redundant unlocks of visornic_devdata.priv_lock

These redundant unlocks of visornic_devdata.priv_lock would result in
the RHEL 7.2 guests hanging during service partition recovery testing.

__Testing__

* An scp of a large file was started from a remote host TO the RHEL 7.2
  Linux guest.

* During the scp transfer, s-Par service partition recovery was forced
  twice. After each occasion, I verified that the guest recovered
  completely (all s-Par guest devices), and that the file transfer
  resumed.

* Within the RHEL 7.2 guest environment, copied the large file to
  another location in the local filesystem.

* During the copy, s-Par service partition recovery was again forced
  twice. After each occasion, I verified that the guest recovered
  completely (all s-Par guest devices), and that the copy resumed.

* An scp of the new copy of the large file was started FROM the RHEL 7.2
  guest to a remote host.

* During the scp transfer, s-Par service partition recovery was forced
  twice. After each occasion, I verified that the guest recovered
  completely (all s-Par guest devices), and that the file transfer
  resumed.

* Used cmp to verify that the large file had successfully survived the
  round-trip without becoming corrupted.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: Remove errant -EIO returns

Remove errant -EIOs that prevent us from calling either
netif_start_queue() or napi_disable().

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visornic: Reorder logic in visornic_enable_with_timeout()

Moves the call to napi_enable() before the call to init_rcv_bufs(),
ensuring that messages are not put into the receive queue until the guest
is ready to receive interrupts.

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Remove duplicate invocation of init_rcv_bufs()

Removes the invocation to init_rcv_bufs() in visornic_resume() because that
function is already called in visornic_enable_with_timeout().

Signed-off-by: David Binder <david.binder@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Replace parser_param_start with parser_name_get

Replace the general CONTROLVM string parser setup which only handled the
name string with a specific name string retrieval function.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: relocate error-check from isr to registration

It just makes more sense to do the NULL-pointer check when the function is
called to enable interrupts, rather than on *every* interrupt.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: Remove unused enum members

Visorchipset used to parse CONTROLVM messages with a variety of string
information. All but the name string have been removed, but the code
to handle this information remained. This patch removes the other values
and handlers.

Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 4.10-rc3 into staging-next

We want the IIO and staging driver fixes in here as well to handle merge
issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.10-rc3

Merge tag 'usb-4.10-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
  artifact of the holiday break I think.

  Lots of gadget and the usual XHCI fixups for reported issues (one day
  that driver will calm down...) Also included are a bunch of usb-serial
  driver fixes, and for good measure, a number of much-reported MUSB
  driver issues have finally been resolved.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
  USB: fix problems with duplicate endpoint addresses
  usb: ohci-at91: use descriptor-based gpio APIs correctly
  usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
  usb: hub: Move hub_port_disable() to fix warning if PM is disabled
  usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
  usb: musb: fix compilation warning on unused function
  usb: musb: Fix trying to free already-free IRQ 4
  usb: musb: dsps: implement clear_ep_rxintr() callback
  usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
  USB: serial: ti_usb_3410_5052: fix NULL-deref at open
  USB: serial: spcp8x5: fix NULL-deref at open
  USB: serial: quatech2: fix sleep-while-atomic in close
  USB: serial: pl2303: fix NULL-deref at open
  USB: serial: oti6858: fix NULL-deref at open
  USB: serial: omninet: fix NULL-derefs at open and disconnect
  USB: serial: mos7840: fix misleading interrupt-URB comment
  USB: serial: mos7840: remove unused write URB
  USB: serial: mos7840: fix NULL-deref at open
  USB: serial: mos7720: remove obsolete port initialisation
  USB: serial: mos7720: fix parallel probe
  ...

Merge tag 'char-misc-4.10-rc3' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc fixes from Greg KH:
 "Here are a few small char/misc driver fixes for 4.10-rc3.

  Two MEI driver fixes, and three NVMEM patches for reported issues, and
  a new Hyper-V driver MAINTAINER update. Nothing major at all, all have
  been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  hyper-v: Add myself as additional MAINTAINER
  nvmem: fix nvmem_cell_read() return type doc
  nvmem: imx-ocotp: Fix wrong register size
  nvmem: qfprom: Allow single byte accesses for read/write
  mei: move write cb to completion on credentials failures
  mei: bus: fix mei_cldev_enable KDoc

Merge tag 'staging-4.10-rc3' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO fixes from Greg KH:
 "Here are some staging and IIO driver fixes for 4.10-rc3.

  Most of these are minor IIO fixes of reported issues, along with one
  network driver fix to resolve an issue. And a MAINTAINERS update with
  a new mailing list. All of these, except the MAINTAINERS file update,
  have been in linux-next with no reported issues (the MAINTAINERS patch
  happened on Friday...)"

* tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  MAINTAINERS: add greybus subsystem mailing list
  staging: octeon: Call SET_NETDEV_DEV()
  iio: accel: st_accel: fix LIS3LV02 reading and scaling
  iio: common: st_sensors: fix channel data parsing
  iio: max44000: correct value in illuminance_integration_time_available
  iio: adc: TI_AM335X_ADC should depend on HAS_DMA
  iio: bmi160: Fix time needed to sleep after command execution
  iio: 104-quad-8: Fix active level mismatch for the preset enable option
  iio: 104-quad-8: Fix off-by-one errors when addressing IOR
  iio: 104-quad-8: Fix index control configuration

mm: workingset: fix use-after-free in shadow node shrinker

Several people report seeing warnings about inconsistent radix tree
nodes followed by crashes in the workingset code, which all looked like
use-after-free access from the shadow node shrinker.

Dave Jones managed to reproduce the issue with a debug patch applied,
which confirmed that the radix tree shrinking indeed frees shadow nodes
while they are still linked to the shadow LRU:

  WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200
  CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3
  Call Trace:
     delete_node+0x1e4/0x200
     __radix_tree_delete_node+0xd/0x10
     shadow_lru_isolate+0xe6/0x220
     __list_lru_walk_one.isra.4+0x9b/0x190
     list_lru_walk_one+0x23/0x30
     scan_shadow_nodes+0x2e/0x40
     shrink_slab.part.44+0x23d/0x5d0
     shrink_node+0x22c/0x330
     kswapd+0x392/0x8f0

This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the
inlined radix_tree_shrink().

The problem is with 14b468791fa9 ("mm: workingset: move shadow entry
tracking to radix tree exceptional tracking"), which passes an update
callback into the radix tree to link and unlink shadow leaf nodes when
tree entries change, but forgot to pass the callback when reclaiming a
shadow node.

While the reclaimed shadow node itself is unlinked by the shrinker, its
deletion from the tree can cause the left-most leaf node in the tree to
be shrunk.  If that happens to be a shadow node as well, we don't unlink
it from the LRU as we should.

Consider this tree, where the s are shadow entries:

       root->rnode
            |
       [0       n]
        |       |
     [s    ] [sssss]

Now the shadow node shrinker reclaims the rightmost leaf node through
the shadow node LRU:

       root->rnode
            |
       [0        ]
        |
    [s     ]

Because the parent of the deleted node is the first level below the
root and has only one child in the left-most slot, the intermediate
level is shrunk and the node containing the single shadow is put in
its place:

       root->rnode
            |
       [s        ]

The shrinker again sees a single left-most slot in a first level node
and thus decides to store the shadow in root->rnode directly and free
the node - which is a leaf node on the shadow node LRU.

  root->rnode
       |
       s

Without the update callback, the freed node remains on the shadow LRU,
where it causes later shrinker runs to crash.

Pass the node updater callback into __radix_tree_delete_node() in case
the deletion causes the left-most branch in the tree to collapse too.

Also add warnings when linked nodes are freed right away, rather than
wait for the use-after-free when the list is scanned much later.

Fixes: 14b468791fa9 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking")
Reported-by: Dave Chinner <david@fromorbit.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-and-tested-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Leech <cleech@redhat.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: stop leaking PageTables

4.10-rc loadtest (even on x86, and even without THPCache) fails with
"fork: Cannot allocate memory" or some such; and /proc/meminfo shows
PageTables growing.

Commit 953c66c2b22a ("mm: THP page cache support for ppc64") that got
merged in rc1 removed the freeing of an unused preallocated pagetable
after do_fault_around() has called map_pages().

This is usually a good optimization, so that the followup doesn't have
to reallocate one; but it's not sufficient to shift the freeing into
alloc_set_pte(), since there are failure cases (most commonly
VM_FAULT_RETRY) which never reach finish_fault().

Check and free it at the outer level in do_fault(), then we don't need
to worry in alloc_set_pte(), and can restore that to how it was (I
cannot find any reason to pte_free() under lock as it was doing).

And fix a separate pagetable leak, or crash, introduced by the same
change, that could only show up on some ppc64: why does do_set_pmd()'s
failure case attempt to withdraw a pagetable when it never deposited
one, at the same time overwriting (so leaking) the vmf->prealloc_pte?
Residue of an earlier implementation, perhaps? Delete it.

Fixes: 953c66c2b22a ("mm: THP page cache support for ppc64")
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild

Pull kbuild fix from Michal Marek:
 "The asm-prototypes.h file added in the last merge window results in
  invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms
  segfaults.

  This pull request fixes the header, the genksyms fix is in my kbuild
  branch for 4.11"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  asm-prototypes: Clear any CPP defines before declaring the functions

MAINTAINERS: add greybus subsystem mailing list

The Greybus driver subsystem has a mailing list, so list it in the
MAINTAINERS file so that people know to send patches there as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm724x: cleanup long lines to conform to kernel coding style

Refactor code to remove multi-line derefs and code duplication

Signed-off-by: Emil Gedda <emil.gedda@emilgedda.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8188eu:rtw_ap.c remove unnecessary braces

Removed unnecessary braces

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: Align lines to match open parenthesis

fixing checkpatch.pl check: Alignment should match open parenthesis

Signed-off-by: Baruch Nissenbaum <baruch@ibn-labs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8188eu:core Fixes Alignment should match opening brace

Fixed style issue: Alignment should match open brace

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8712 Aligned code with open parenthesis

Aligned code with open parenthesis to fix a checkpatch warning

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8712: Removed unnecessary parentheses

Removed unnecessary parentheses identified by checkpatch

Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: remove timesync protocol support

While the timesync protocol was a great idea, it never ended up getting
implemented by any known hardware devices.  It's also a bit
"interesting" in how it ties into the platform controller.

So, just remove it for now.  It's not needed, no one uses it, and it's a
stumbling block in getting the greybus core code merged out of the
staging tree.  If anyone wants it in the future, reverting this patch is
a great place to start from.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'sound-4.10-rc3' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Nothing particular stands out, only a few small fixes for USB-audio,
  HD-audio and Firewire. The USB-audio fix is the respin of the previous
  race fix after a revert due to the regression"

* tag 'sound-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  Revert "ALSA: firewire-lib: change structure member with proper type"
  ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
  ALSA: usb-audio: Fix irq/process data synchronization
  ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL
  ALSA: hda - Fix up GPIO for ASUS ROG Ranger
  ALSA: firewire-lib: change structure member with proper type
  ALSA: firewire-tascam: Fix to handle error from initialization of stream data
  ALSA: fireworks: fix asymmetric API call at unit removal

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "One fix for a broken driver on Renesas RZ/A1 SoCs with bootloaders
  that don't turn all the clks on and another fix for stm32f4 SoCs where
  we have multiple drivers attaching to the same DT node"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method
  clk: renesas: mstp: Support 8-bit registers for r7s72100

Merge tag 'hwmon-for-linus-v4.10-rc3' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Fix temp1_max_alarm attribute in lm90 driver"

* tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (lm90) fix temp1_max_alarm attribute

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
 "MIPS:
   - fix host kernel crashes when receiving a signal with 64-bit
     userspace

   - flush instruction cache on all vcpus after generating entry code

     (both for stable)

  x86:
   - fix NULL dereference in MMU caused by SMM transitions (for stable)

   - correct guest instruction pointer after emulating some VMX errors

   - minor cleanup"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: remove duplicated declaration
  KVM: MIPS: Flush KVM entry code from icache globally
  KVM: MIPS: Don't clobber CP0_Status.UX
  KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS
  KVM: nVMX: fix instruction skipping during emulated vm-entry

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

 - re-introduce the arm64 get_current() optimisation

 - KERN_CONT fallout fix in show_pte()

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: restore get_current() optimisation
  arm64: mm: fix show_pte KERN_CONT fallout