V4L/DVB (8260): sms1xxx: build fixes

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8259): sms1xxx: pass adapter_nr into dvb_register_adapter

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8258): add support for SMS1010 and SMS1150 based digital television devices

initial driver drop, provided by Siano Mobile Silicon, Inc.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8257): uvcvideo: Fix possible AB-BA deadlock with videodev_lock and open_mutex

The uvcvideo driver's uvc_v4l2_open() method is called from videodev's
video_open() function, which means it is called with the videodev_lock
mutex held.  uvc_v4l2_open() then takes uvc_driver.open_mutex to check
dev->state and avoid racing against a device disconnect, which means
that open_mutex must nest inside videodev_lock.

However uvc_disconnect() takes the open_mutex around setting
dev->state and also around putting its device reference.  However, if
uvc_disconnect() ends up dropping the last reference, it will call
uvc_delete(), which calls into the videodev code to unregister its
device, and this will end up taking videodev_lock.  This opens a
(unlikely in practice) window for an AB-BA deadlock and also causes a
lockdep warning because of the lock misordering.

Fortunately there is no apparent reason to hold open_mutex when doing
kref_put() in uvc_disconnect(): if uvc_v4l2_open() runs before the
state is set to UVC_DEV_DISCONNECTED, then it will take another
reference to the device and kref_put() won't call uvc_delete; if
uvc_v4l2_open() runs after the state is set, it will run before
uvc_delete(), see the state, and return immediately -- uvc_delete()
does uvc_unregister_video() (and hence video_unregister_device(),
which is synchronized with videodev_lock) as its first thing, so there
is no risk of use-after-free in uvc_v4l2_open().

Bug diagnosed based on a lockdep warning reported by Romano Giannetti
<romano@dea.icai.upcomillas.es>.

Signed-off-by: Roland Dreier <roland@digitalvampire.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8256): uvc/uvc_v4l2.c: suppress uninitialized var warning

drivers/media/video/uvc/uvc_v4l2.c: In function `uvc_v4l2_mmap':
drivers/media/video/uvc/uvc_v4l2.c:1035: warning: 'buffer' might be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8254): uvcvideo : Add support for Asus F9GS integrated webcam

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8253): gspca: fix warnings on x86_64

/home/v4l/master/v4l/gspca.c: In function 'gspca_frame_add':
/home/v4l/master/v4l/gspca.c:222: warning: format '%d' expects type 'int', but argument 2 has type 'long int'
/home/v4l/master/v4l/gspca.c: In function 'dev_read':
/home/v4l/master/v4l/gspca.c:1568: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
/home/v4l/master/v4l/gspca.c:1618: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'

Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8252): buf-dma-sg.c: avoid clearing memory twice

1) Remove a useless initialisation of 'i'

2) Avoid clearing the memory allocated twice (once in 'kcalloc', once
   in 'sg_init_table')

3) Remove a test that can never trigger.  The function returns NULL in
   such a case, so we know that at this point 'pages[0]' != NULL

Signed-off-by: Christophe Jaillet <jaillet.christophe@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8251): ttusb: use simple_read_from_buffer()()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8249): Fix pointer cast warnings in the ivtv framebuffer driver

Fix casts of pointers to integers of different sizes in the ivtv framebuffer
driver.

These were introduced in patch 38eb6ba5b8487d15b020fe391d324edd2b659b03.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8246): tvaudio: Stop I2C driver ID abuse

The tvaudio driver is using "official" I2C device IDs for internal
purpose. There must be some historical reason behind this but anyway,
it shouldn't do that. As the stored values are never used, the easiest
way to fix the problem is simply to remove them altogether.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8245): ovcamchip: Delete stray I2C bus ID

I2C_HW_SMBUS_OVFX2 is referenced in ovcamchip_core.c, but no bus uses
this driver ID, so we can remove the reference. As far as I can see,
the Cypress FX2 webcam is handled by a different driver (dvb-usb).

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8244): saa7134: add support for AVerMedia M103

The following patch updates saa7134 driver to add support for AVerMedia
M103 MiniPCI DVB-T Hybrid card.

Signed-off-by: Massimo Piccioni <alsa@piccio.org>
[mchehab@infradead.org: fixed merge conflicts and a small codingstyle]
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8236): cx23885: add support for new revision of FusionHDTV7 Dual Express

The new revision of this board uses the same pci subsystem id as the first
revision, but uses a S5H1411 demodulator instead of the S5H1409.

In the case of the FusionHDTV7 Dual Express,
if s5h1409_attach fails, try s5h1411_attach.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8235): uvcvideo : Add support for Medion Akoya Mini E1210 integrated webcam

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8234): uvcvideo: Make input device support optional

UVC devices can report button events. The uvcvideo driver depends on
CONFIG_INPUT to report events to the input layer. This patch removes the hard
dependency by introducing a new CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV option.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8232): gspca: Change the USERPTR mechanism.

main:     Change the packet copy mechanism for userptr.
          Cannot do reqbufs ioctl when already done and count != 0.
          Accept count < frame size in read().

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8231): gspca: Do not declare the webcams declared by other drivers.

etoms:    Do not declare the webcams declared by the driver et61x251.
sonixb, sonixj:
          Do not declare the webcams declared by the driver sn9c102.
zc3xx:    Do not declare the webcams declared by the driver zc0301.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

v4l-dvb: remove legacy checks to allow support for kernels < 2.6.10

Also remove some blank lines that were used to split compat code at -devel
tree.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8209): uvcvideo: Don't free URB buffers on suspend.

All submitted URBs must be killed at suspend time, but URB buffers don't have
to be freed. Avoiding a free on suspend/reallocate on resume lowers the presure
on system memory.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8208): uvcvideo: Use GFP_NOIO when allocating memory during resume

The swap device might still be asleep, so memory allocated in the resume
handler must use GFP_NOIO. Thanks to Oliver Neukum for catching and reporting
this bug.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8207): uvcvideo: Fix a buffer overflow in format descriptor parsing

Thanks to Oliver Neukum for catching and reporting this bug.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8205): gspca: Size of frame header adjusted according to sn9c10x in sonixb.

Signed-off-by: Andoni Zubimendi <andoni.zubimendi@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8204): gspca: Cleanup code.

spca508:  Cleanup code.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8202): gspca: PAC207 frames may be not compressed.

pac207:   Set the sizeimage to the max value for 352x288.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8201): gspca: v4l2_pix_format in each subdriver.

main:     Parameter comp_fac removed.
main, pac207:
          get_buff_size op removed.
(all)     v4l2_pix_format in each subdriver.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8199): gspca: Compile warnings about NULL ptr.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8198): gspca: Frame decoding errors when PAC207 in full daylight.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8197): gspca: pac207 frames no more decoded in the subdriver.

videodev2: New pixfmt
pac207:   Remove the specific decoding.
main:     get_buff_size operation added for the subdriver.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8196): gspca: Correct sizeimage in vidioc_s/try/g_fmt_cap

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8195): gspca: Input buffer overwritten in spca561 + cleanup code.

spca561:  Input buffer may be changed on reg write.
(all sd): Cleanup code, 'const' added.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8194): gspca: Fix the format of the low resolution mode of spca561.

The low (half) res modes of the spca561 are not spca561 compressed, but are
raw bayer, this patches fixes this and adds a PIX_FMT define for the GBRG
bayer format used by the spca561 in low res mode.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8193): gspca: Input buffer may be changed on reg write.

Done for conex, etoms, pac7311, sonixj, t613 and tv8532.
Code cleanup for some other subdrivers.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8192): Try to fix a reg_w() bug

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8191): gspca: Make CONFIG_VIDEO_ADV_DEBUG actually work.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8189): cx18: Use correct GPIO pin for resetting Xceive 3028 tuner on Yuan MPC718

Change the Yuan MPC718 cards entry to use the correct GPIO pin for resetting
the Xceive 3028 tuner.  Thanks to Brian Hope <brian@hopefamily.info> for
taking the time and figuring out which pin to use.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8188): cx18: Add missing reset recovery delay in cx18-i2c.c

cx18: Add a missing reset recovery delay in cx18-i2c.c after
the final deassert.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8186): dib0700: add support for Hauppauge Nova-TD Stick 52009

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8184): spca508: Add Clone Digital Webcam 11043

Added ID vendor/product for Clone Digital Webcam 11043.
Thanks to Ivan Brasil Fuzzer <ivan@fuzzer.com.br> for testing and data collection.

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8183): cxusb: select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE

After adding support for AVerTVHD Volar, DVB_USB_CXUSB must
select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8181): gspca: read() did not work (loop in kernel, timeout...)

main:     Remove some vidioc_xx traces.
main:     read() did not work (user irq instead of mmap irq).
main:     Lack of v4l1 compat.
main:     Process loop inside kernel when no frame arriving.
main:     Double qbuf in read() when too many buffered frames.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8180): Source cleanup - compile error with VIDEO_ADV_DEBUG.

main, etoms, mars, pac207, pac7311, sonixb, sonixj, spca500, spca505:
 Cleanup source.
sunplus: Compilation error when VIDEO_ADV_DEBUG set.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8176): pvrusb2: Update video_gop_size

When switching video standard, ensure that video GOP size remains
appropriately configured.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8175): pvrusb2: Fix misleading source code comment

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8173): saa711x.c: remove obsolete file.

saa711x.c is no longer used. Remove.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8171): ivtv: put back full device name, people relied on it in udev rules.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8169): cx18: enable TS support

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8168): cx18: Upgrade to newer firmware & update cx18 documentation.

Conexant graciously gave us permission to redistribute the
firmware. Update the documentation where the firmware can be
downloaded.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8168a): cx18: Update cx18 documentation.

Update the documentation, providing an updated list of supported boards.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8167): cx18: set correct audio inputs for tuner and line-in 2.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8165): cx18: fix v4l-cx23418-dig.fw firmware load.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8164): cx18/ivtv: choose a better initial TV standard for cards without eeprom.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8162): cx18: fix PAL/SECAM support

Reverted the 'Fix unintended auto configurations in cx18-av-core' patch,
instead disable the auto config completely.

Fix a bug in cx18_av_vbi_setup() where the standard tests were done
in the wrong order.

Tested with NTSC-M, PAL-BG, PAL-I, PAL-DK, PAL-M, PAL-Nc, SECAM-DK,
SECAM-L and SECAM-BG. The last one does not work at the moment due to
a tda9887.c bug.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8161): gspca: Fix compilation

Some callbacks were renamed. Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8158): gspca: minor changes

main: V4L2_PIX_FMT_SPCA501 is compressed (thanks to Hans de Goede)
main: return 0 when no change on vidioc_s_fmt_cap (thanks to Hans de Goede)
pac207: cleanup

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8157): gspca: all subdrivers

- remaning subdrivers added
- remove the decoding helper and some specific frame decodings

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8156): Many bug fixes, zc3xx added.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8154): Fix protection problems in the main driver.

- Protect format change when streaming active.
- Protect USB exchanges on close.
- Set a timeout in frame wait.
- Have only one capture file and free the resources when closing this file.
- Simplify the URB buffer.
- Don't reset the control values at open time in pac207.
- Fix compilation warnings of stk014.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8153): Subdriver pac207 added and minor changes.

pac207 added.
Check status on mutex lock.
Call back on frame dequeue.
Free the resources on last close only.
Avoid URB and ISOC errors on close.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8152): Initial release of gspca with only one driver.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8151): saa7134-empress: fix MPEG control support

The MPEG controls could not be enumerated and so could not be read or set
through the v4l2-ctl utility or shown in control panels.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8149): Avermedia E506 composite

Composite was originally mis-labelled as name_comp1,
so it should be simply redone as name_comp,
with its now corrected attributes.

Signed-off-by: Tim Farrington <timf@iinet.net.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8147): cxusb: add initial support for AVerTVHD Volar

Add initial support for this device. The AGC and tracking filter
settings for the mxl5003 are known to be wrong, but it generally works.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8146): lgdt330x: add additional FEC control configuration option

Allow the following configuration, by passing clock_polarity_flip = 2:

Enable FEC automatic reset. Disable spectrum inversion.
Enable viterbi resynchronization. Set polarity indicator high.
Enable error flag insertion.

Thanks to Daniel Gimpelevich, for discovering that this configuration
is used on the AVerMedia AVerTVHD Volar.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
CC: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8143): Fix compilation for mt9v022

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8142): ttpci: tda827x.h is at drivers/media/common

As reported by Stephen Rothwell <sfr@canb.auug.org.au>:

drivers/media/dvb/ttpci/budget-ci.c:50:21: error: tda827x.h: No such file or directory

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8136): xc2028 unaligned access fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8135): WRITE_RPS1() converts to le32 itself

... but two ancient drivers had not noticed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8134): zoran annotations and fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8133): cx23885 endianness fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8132): bt8xx endianness annotations and fixes

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8131): dmx_write: memcpy from user-supplied pointer

... copy to kernel memory first

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8130): split dvb_ringbuffer dual-use functions

split the suckers into kernel-memory and user-memory versions,
annotate both properly.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8129): pluto_set_dma_addr() fix

bogus cpu_to_le32() when passing dma address to hardware
via writel() - writel() converts itself.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8128): saa7146: ->cpu_addr and friends are little-endian

Annotations + stop saa7146_i2c from playing fast and loose with
reuse of ->cpu_addr for host-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8126): net endianness fix

According to RFC 4326 (4.1) D-bit is MSB in net-endian 16bit.
dvb_net.c did
/* Set D-bit for CRC32 verification,
 * if it was set originally. */
ulen |= 0x0080;
which works of little-endian (htons(1<<15) is 0x0080 there), but breaks
on big-endian.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.

It was primarily developed by Dean Anderson with only a little bit of
guidance and cleanup by Greg.

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[mchehab@infradead.org: fixed renamed callbacks]
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8124): Add LifeVideo To-Go Cardbus PCI ID

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8123): Add support for em2860 based PointNix Intra-Oral Camera

em28xx-cards.c
em28xx-input.c
em28xx-video.c
em28xx.h
 - Add support for the PointNix Intra-Oral Camera, which required addition of
   a construct for reading the "snapshot" button (provided on the em2860 and
   em2880 chips, but this is the first case where I have seen it actually used
   in a product). The button is wired to pin 56 on the em2880.

   http://www.pointnix.com/ENG/dental/product_02.asp

   Thanks to Roberto Mantovani <rmantovani@libero.it> for testing the changes

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8120): cx23885-417: Replace cx23885_do_ioctl to use video_ioctl2

Convert cx23885-417 to use video_ioctl2

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8117): saa7134: Avermedia A16D composite input

Signed-off-by: Star Trac by Unisen, Inc. Dan Taylor <dtaylor@startrac.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8116): videodev: allow PRIVATE_BASE controls when called through VIDIOC_G/S_CTRL.

V4L2_CID_PRIVATE_BASE controls are not allowed when called from
VIDIOC_S/G_EXT_CTRL as extended controls use a better mechanism
for private controls. But still allow it when called from the
VIDIOC_G/S_CTRL to extended control conversion in video_ioctl2()
for backwards compatibility.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8114): cx18: Improve Raptor card audio input routing defintions

cx18: Improved Raptor card audio input routing defintions, so that muxer values
matched cx18_gpio() values for tuner, line in 1, and radio and added LED
indication of selected audio input.  Audio line in 2 doesn't work as it uses
the not yet supported 2nd I2S port.  Tuner/FM Radio AF is mono until SIF
support is fixed.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8113): ivtv/cx18: remove s/g_ctrl, now all controls are handled through s/g_ext_ctrl

videodev converts old-style controls to an extended control so the ivtv and
cx18 drivers no longer have to handle both.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8112): videodev: improve extended control support in video_ioctl2()

- add sanity checks for the extended controls argument.
- if the driver only supports extended controls, then convert
  old-style controls to an extended control callback.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8111): ivtv/cx18: fix compile error when CONFIG_VIDEO_ADV_DEBUG is not defined.

Thanks to Randy Dunlap for reporting this.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8110): bttv: allow debug ioctl's

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8107): cx18: improve support for the Raptor board.

- add radio definition
- reset the audio firmware (required for this board, harmless for the
others)

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8106): ivtv/cx18: improve tuner std check in card definitions.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8105): cx2341x: add TS capability

The cx18 can support transport streams with newer firmwares. Add a TS
capability to the generic cx2341x module.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8104): cx18/ivtv: ioctl debugging improvements

Completely rely on the video_ioctl2 debugging facilities rather than
doing it ourselves.

Fill in some missing fields in ivtv with VIDIOC_G_FBUF.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8103): videodev: fix/improve ioctl debugging

Various ioctl debugging fixes and improvements:

- use %x rather than %d for control IDs and bitmask fields
- make two arrays const
- show the whole control array for the ext_ctrl ioctls
- print pix_fmt for V4L2_BUF_TYPE_VIDEO_OUTPUT
- show full type name rather than an integer
- fix CROPCAP debugging
- fix G/S_TUNER debugging
- show error code in case of an error
- other small cleanups

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8098): xc5000: add module option to load firmware during driver attach

The xc5000 firmware download process can be slow on certain devices.

Add a module option, "init_fw" to perform the firmware download during
xc5000_attach(), which would get the firmware download over with well
before any tune request is made.

When this option is enabled, it will reduce the time it takes to get a
signal lock during the first tune after driver load, but will add a few
seconds to the driver initialization.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8095): zoran_driver.c: Removed duplicated include

Removed duplicated include file <asm/byteorder.h> in
drivers/media/video/zoran_driver.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8093): cx18: fix prefix typo

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8091): cx18: show GPIO pins when VIDIOC_LOG_STATUS is called.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8090): ivtv: yuv decoder lock fix (2)

The IVTV_IOC_DMA_FRAME ioctl fails to correctly 'start' the decoder. Although
yuv output will be correct, some functions which should be disabled while the
decoder is in use remain enabled. This can result in hardware registers being
corrupted, causing problems with the mpeg decoder. This patch ensures the
decoder 'start' sequence is called, disabling these functions until the
device is closed.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8089): cx18: add support for Conexant Raptor PAL/SECAM card

Patch provided courtesy of Conexant http://www.conexant.com.

Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8088): ivtv: yuv decoder lock fix

write() operations to the yuv device may not always 'start' the decoder.
Although yuv output will be correct, some functions which should be disabled
while the decoder is in use remain enabled. This can result in hardware
registers being corrupted, causing problems with the mpeg decoder. This patch
simply moves the existing decoder 'start' sequence to earlier in the write()
handler.

Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

V4L/DVB (8087): cx18: make sure all v4l2_format fields are filled in

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>