Mike Isely [Thu, 3 Apr 2008 07:51:19 +0000 (04:51 -0300)]
V4L/DVB (7709): pvrusb2: New device attribute for encoder usage in digital mode
Some tuners seem to not work in digital mode unless the encoder is
healthy. Implement a device attribute to represent this flag and
modify the core state machines to enforce this requirement.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Sun, 30 Mar 2008 23:36:31 +0000 (20:36 -0300)]
V4L/DVB (7708): pvrusb2-dvb: Fix stuck thread on streaming abort
If the device fails to stream, the feed thread will block forever
waiting for buffers. But while in this state it was not looking for
an exit condition from the driver DVB interface. This caused the
thread to jam. Implement a new stop flag (which will be set
appropriately) to tell the thread to stop.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Fri, 28 Mar 2008 08:49:36 +0000 (05:49 -0300)]
V4L/DVB (7707): pvrusb2-dvb: add atsc/qam support for Hauppauge pvrusb2 model 750xx
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Fri, 28 Mar 2008 08:48:44 +0000 (05:48 -0300)]
V4L/DVB (7706): pvrusb2: create a separate pvr2_device_desc structure for 751xx models
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Fri, 28 Mar 2008 08:47:47 +0000 (05:47 -0300)]
V4L/DVB (7705): pvrusb2: Enable OnAir digital operation
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:43:45 +0000 (05:43 -0300)]
V4L/DVB (7704): pvrusb2: Fix slop involving use of struct which might not be defined
When the DVB interface is not compiled, the pvr2_dvb_props struct is
not available - so it really should be ifdef'ed out as well. This
didn't cause an error because in this context its usage was as an
opaque pointer. But it really shouldn't be present at all if DVB is
not enabled.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:42:10 +0000 (05:42 -0300)]
V4L/DVB (7703): pvrusb2: Fix minor problem involving ARRAY_SIZE confusion
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:41:19 +0000 (05:41 -0300)]
V4L/DVB (7702): pvrusb2: Rework USB streaming start/stop execution
The commands to start / stop USB streaming for an analog device are
fairly standard, owing to the fact that all supported devices
apparently started from the same common reference design. However
with digital mode, the commands seem to vary by vendor. This change
makes that variance more explicit. It also cleans up a related
problem for OnAir devices which prevented digital mode from working at
all.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:38:54 +0000 (05:38 -0300)]
V4L/DVB (7701): pvrusb2: Centralize handling of simple FX2 commands
Numerous places in the driver need to issue simple commands to the FX2
microcontroller (e.g. only 1 or 2 bytes, no reply needed). Previously
each place that did this, had to take lock, set up a central buffer,
and call the function to perform the handshake. This change puts
these steps into a single spot. This also has the effect of removing
the need to mess with the control lock from numerous places in the
code.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:36:25 +0000 (05:36 -0300)]
V4L/DVB (7700): pvrusb2: Make FX2 command codes unsigned constants
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:34:45 +0000 (05:34 -0300)]
V4L/DVB (7699): pvrusb2: Implement statistics for USB I/O performance / tracking
Implement a mechanism in the pvrusb2 driver for gathering statistics
on the stream buffering, including bytes transferred, buffers handled,
buffers in flight, etc. This is useful for debugging certain classes
of streaming issues and for determining if the buffer pool size is
generally correct for the driver.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:32:23 +0000 (05:32 -0300)]
V4L/DVB (7698): pvrusb2: Remove never-reached break statements (trivial)
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:31:40 +0000 (05:31 -0300)]
V4L/DVB (7697): pvrusb2: Fix misleading bit of debug output (trivial)
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:30:48 +0000 (05:30 -0300)]
V4L/DVB (7696): pvrusb2: state control tweak
Don't trigger a pathway state change if it's already been triggered
(eliminates some wasted processing and some debug output noise)
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Fri, 28 Mar 2008 08:28:20 +0000 (05:28 -0300)]
V4L/DVB (7695): pvrusb2: Make associativity of == and && explicit (cosmetic)
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Sun, 16 Mar 2008 05:12:12 +0000 (02:12 -0300)]
V4L/DVB (7694): pvrusb2: Fix compilation goof when CONFIG_VIDEO_PVRUSB2_DVB is off
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Sat, 9 Feb 2008 22:47:52 +0000 (19:47 -0300)]
V4L/DVB (7693): pvrusb2-dvb: Change usage of 0 --> NULL
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Sat, 9 Feb 2008 22:47:07 +0000 (19:47 -0300)]
V4L/DVB (7692): pvrusb2-dvb: Further clean up dvb init/tear-down
Move pvr2_dvb_adapter usage out of the pvrusb2 driver core - it's
really private to the pvrusb2-dvb module and nothing outside of the
dvb implementation should care about it. Creation / destruction of
the pvr2_dvb_adapter instance is now contained entirely within
pvrusb2-dvb.c.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Sat, 9 Feb 2008 19:29:52 +0000 (16:29 -0300)]
V4L/DVB (7691): pvrusb2-dvb: Don't initialize if device lacks a digital side
In the end we'd like the dvb interface to always be present - even for
analog devices (via the mpeg encoder). However right now pvrusb2-dvb
won't operate correctly if the hardware doesn't have a digital tuner,
so don't initialize the DVB interface unless we know we have a digital
tuner.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Sat, 9 Feb 2008 18:55:54 +0000 (15:55 -0300)]
V4L/DVB (7690): pvrusb2-dvb: Remove digital_up flag
Other pvrusb2-dvb changes have made the digital_up flag obsolete. So
kill it.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Sat, 9 Feb 2008 18:44:30 +0000 (15:44 -0300)]
V4L/DVB (7689): pvrusb2-dvb: Rework module tear-down
Rather than making an explicit call to tear down the pvrusb2-dvb
module, use the callback in the pvr2_channel structure. This has the
advantage that now tear-down only happens when it makes sense. The
previous implementation had scenarios where it was possible for the
tear-down call to happen without a prior initialization.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Wed, 6 Feb 2008 09:59:48 +0000 (06:59 -0300)]
V4L/DVB (7688): pvrusb2: Clean up dvb streaming start/stop
Eliminate the need for a separate pvr2_dvb_fh; since in the DVB
context there can only ever be a single instance then there is no need
for a separate instance to handle streaming state. This simplifies
the module. Also move streaming start/stop out of the feed thread and
into the driver's main context - which makes it possible for streaming
start up failures to be detected by the DVB core.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Wed, 6 Feb 2008 07:24:51 +0000 (04:24 -0300)]
V4L/DVB (7687): pvrusb2: Fix oops in pvrusb2-dvb
The pvrusb2-dvb feed thread cannot be allowed to exit by itself
without first waiting for kthread_should_stop() to return true.
Otherwise the driver will have a dangling task_struct context, which
will cause a very nasty kernel oops.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Mon, 4 Feb 2008 07:22:21 +0000 (04:22 -0300)]
V4L/DVB (7686): pvrusb2: Fix broken debug interface build
Fix pvrusb2 kbuild typo introduced when pvrusb2-dvb was added.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Mon, 4 Feb 2008 04:00:33 +0000 (01:00 -0300)]
V4L/DVB (7685): pvrusb2: Fix really bad typo if DVB config option description
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Mon, 4 Feb 2008 03:12:16 +0000 (00:12 -0300)]
V4L/DVB (7684): pvrusb2: Add VIDEO_PVRUSB2_DVB config variable
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Sun, 10 Feb 2008 08:33:37 +0000 (05:33 -0300)]
V4L/DVB (7683): pvrusb2-dvb: set to DTV mode before attaching frontend
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Mon, 4 Feb 2008 03:00:19 +0000 (00:00 -0300)]
V4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Mon, 4 Feb 2008 02:55:07 +0000 (23:55 -0300)]
V4L/DVB (7681): pvrusb2-dvb: start working on streaming / buffer handling code
start work on streaming / buffer handling code to feed the software demux
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Mon, 4 Feb 2008 02:48:09 +0000 (23:48 -0300)]
V4L/DVB (7680): pvrusb2-dvb: add pvr2_dvb_bus_ctrl to allow frontends to negotiate bus access
This function is just a skeleton for now -
a placeholder to remind us to fix it.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Mon, 4 Feb 2008 02:46:16 +0000 (23:46 -0300)]
V4L/DVB (7679): pvrusb2: add DVB API framework
Add basic framework for the DVB API. This is enough to control the
tuner & demod of the digital frontend, but the stream & buffer handling
is still missing.
Additional note from Mike Isely <isely@pobox.com> - also, since these
changes are still very experimental arrange for DVB changes to be
compiled in via new CONFIG_VIDEO_PVRUSB2_DVB option, for now.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Isely [Sun, 16 Mar 2008 04:13:17 +0000 (01:13 -0300)]
V4L/DVB (7678): pvrusb2: Fix stupid string typo that has been reproducing wildly
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dmitry Belimov [Wed, 23 Apr 2008 17:09:08 +0000 (14:09 -0300)]
V4L/DVB (7677): saa7134: Add/fix Beholder entries
Beholder TV/FM tuners:
Changes:
Add support Beholder Columbus PCMCIA card.
Add key map for remote control of Beholder Columbus PCMCIA card.
Fix gpiomask for all Beholder tuners.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dmitry Belimov [Wed, 23 Apr 2008 17:07:09 +0000 (14:07 -0300)]
V4L/DVB (7676): saa7134: fix: Properly handle busy states on i2c bus
There are two conditions, reported by saa7134 that indicates that the I2C bus
is busy: TO_SCL and TO_ARB.
On both states, it needs to wait for I2C release, before using the bus.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Dmitry Belimov [Wed, 23 Apr 2008 17:01:52 +0000 (14:01 -0300)]
V4L/DVB (7675): tea5767 autodetection is not working on some saa7134 boards
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Wed, 23 Apr 2008 01:52:01 +0000 (22:52 -0300)]
V4L/DVB (7674): tda10048: Adding an SNR table
Trying to improve the SNR reporting.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Tue, 22 Apr 2008 18:38:26 +0000 (15:38 -0300)]
V4L/DVB (7673): cx23885: Add support for the Hauppauge HVR1400
DVB-T mode is now supported using the DiBcom dib7000p demodulator
and the Xceive xc3028L silicon tuner. Analog mode is not supported.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Tue, 22 Apr 2008 18:37:01 +0000 (15:37 -0300)]
V4L/DVB (7672): dib7000p: Add output mode param to the attach struct
This allows future drivers to select the most appropriate output mode.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Reviewed-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Guennadi Liakhovetski [Tue, 22 Apr 2008 13:40:23 +0000 (10:40 -0300)]
V4L/DVB (7671): pxa-camera: fix DMA sg-list coalescing for more than 2 buffers
Currently the pxa-camera driver has a bug, visible when the user requests
more than 2 video buffers. When the third buffer is queued, it is not
appended to the DMA-descriptor list of the second buffer, but is again
appended to the first buffer. Fix it.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Guennadi Liakhovetski [Tue, 22 Apr 2008 13:37:49 +0000 (10:37 -0300)]
V4L/DVB (7670): pxa-camera: handle FIFO overruns
FIFO overruns are not seldom on PXA camera interface FIFOs. Handle them by
dropping the corrupted frame, waiting for the next start-of-frame, and
restarting capture.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mike Rapoport [Tue, 22 Apr 2008 13:36:32 +0000 (10:36 -0300)]
V4L/DVB (7669): pxa_camera: Add support for YUV modes
This patch adds support for YUV packed and planar capture for pxa_camera.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Guennadi Liakhovetski [Tue, 22 Apr 2008 13:33:39 +0000 (10:33 -0300)]
V4L/DVB (7668): soc-camera: Remove redundant return
This obviously redundant return has been in the driver from the very first
version. Remove it.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Douglas Schilling Landgraf [Thu, 10 Apr 2008 05:07:14 +0000 (02:07 -0300)]
V4L/DVB (7666): meye: Replace meye_do_ioctl to use video_ioctl2
Convert meye to use video_ioctl2
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Douglas Schilling Landgraf [Thu, 10 Apr 2008 04:18:56 +0000 (01:18 -0300)]
V4L/DVB (7665): videodev: Add default vidioc handler
Added default vidioc handler for other private ioctls
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Mon, 21 Apr 2008 01:34:57 +0000 (22:34 -0300)]
V4L/DVB (7663): budget: Support for Activy budget card with BSBE1 tuner
Add support for Activy budget card with BSBE1 tuner, subsystem id 0x1131:0x4f60.
Low band and DiSEqC support should work now (BSBE1 and BSRU6 tuner).
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Mon, 21 Apr 2008 01:13:37 +0000 (22:13 -0300)]
V4L/DVB (7662): stv0299: Fixed some typos
Fixed some typos.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Mon, 21 Apr 2008 00:57:34 +0000 (21:57 -0300)]
V4L/DVB (7661): stv0299: Add flag to turn off OP0 output
Add flag to turn off OP0 output.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Oliver Endriss [Sun, 20 Apr 2008 23:41:42 +0000 (20:41 -0300)]
V4L/DVB (7660): bsbe1: Use settings recommended by the manufacturer
Reworked the BSBE1 tuner support in bsbe1.h to follow
the ALPS-recommended parameters more closely.
Tested with BSBE1-based Activy cards and TT DVB-S rev 2.3.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrea Odetti [Sun, 20 Apr 2008 22:14:51 +0000 (19:14 -0300)]
V4L/DVB (7659): dvb-core: Implement DMX_SET_BUFFER_SIZE for dvr
Implementation of DMX_SET_BUFFER_SIZE for dvr.
Synchronization of the code of DMX_SET_BUFFER_SIZE for demux and dvr.
Signed-off-by: Andrea Odetti <mariofutire@gmail.com>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrea Odetti [Sun, 20 Apr 2008 21:37:45 +0000 (18:37 -0300)]
V4L/DVB (7658): dvb-core: Fix DMX_SET_BUFFER_SIZE in case the buffer shrinks
This patch fixes the bug in DMX_SET_BUFFER_SIZE for the demux.
Basically it resets read and write pointers to 0 in case they are
beyond the new size of the buffer.
Signed-off-by: Andrea Odetti <mariofutire@gmail.com>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hartmut Hackmann [Mon, 14 Apr 2008 01:41:19 +0000 (22:41 -0300)]
V4L/DVB (7656): tda826x: Calculate cut off fequency from symbol rate
This patch makes the tuner work with transonders providing higher
symbol rates.
It was contributed by Oliver Endriss.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hartmut Hackmann [Mon, 14 Apr 2008 00:09:11 +0000 (21:09 -0300)]
V4L/DVB (7655): tda10086 coding stlye fixes
This patch replaces the c++ style comments.
No functional changes
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Hartmut Hackmann [Thu, 10 Apr 2008 02:07:11 +0000 (23:07 -0300)]
V4L/DVB (7654): tda10086: make the xtal frequency a configuration option
Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency.
This reqires a different setup of the clock PLL.
This patch adds an enum to the tda10086_config struct and sets the proper
values for the boards.
This patch also fixes the DVB-S section of the MD7134_BRIDGE_2
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Devin Heitmueller [Mon, 21 Apr 2008 10:02:09 +0000 (07:02 -0300)]
V4L/DVB (7653): tuner-xc2028: drop the severity of version reporting
tuner-xc2028.c
- Drop the severity level of the xc3028 version reporting, since it's
only of interest to developers and user's don't need to have it show up
in their dmesg output every time they change the channel.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Devin Heitmueller [Mon, 21 Apr 2008 10:01:09 +0000 (07:01 -0300)]
V4L/DVB (7652): em28xx: Drop the severity level of the "urb resubmit failed"
em28xx-core.c
- Drop the severity level of the "urb resubmit failed" to debug, since it
occurs every time a stream disconnects, which fills the dmesg log
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Mon, 21 Apr 2008 09:58:48 +0000 (06:58 -0300)]
V4L/DVB (7651): tuner-xc2028: Several fixes to SCODE
This patch fixes several issues on SCODE:
1) The extracting tool weren't generating the proper tags for SCODE. This
has almost no effect, since those tags shouldn't be used;
2) DIBCOM52 were using a wrong IF. It should be 5200, instead of 5700;
3) seek_firmware were wanting an exact match for firmware type. This is
wrong. As result, no SCODE firmware were loaded;
4) A few files were including the wrong file for seeking demod firmwares;
5) XC3028_FE_DEFAULT can be used, if user doesn't want to load a firmware.
However, this weren't documentated. This feature require more testing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Andrew Morton [Fri, 18 Apr 2008 01:16:31 +0000 (22:16 -0300)]
V4L/DVB (7650): git-dvb: Kconfig fix
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 19 Apr 2008 04:36:06 +0000 (01:36 -0300)]
V4L/DVB (7648): cx23885: Load any module dependencies accordingly
For boards that require the avcore (cx25840) to be active, ensure
it gets loaded.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 19 Apr 2008 04:25:52 +0000 (01:25 -0300)]
V4L/DVB (7647): Add support for the Hauppauge HVR-1700 digital mode
This adds support for DVB-T mode only, analog is not supported.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 19 Apr 2008 04:18:47 +0000 (01:18 -0300)]
V4L/DVB (7646): cx25840: Ensure GPIO2 is correctly set for cx23885/7/8 based products
cx25840: Ensure GPIO2 is correctly set for cx23885/7/8 based products.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 19 Apr 2008 04:14:19 +0000 (01:14 -0300)]
V4L/DVB (7645): Add support for the Hauppauge HVR-1200
This adds support for DVB-T mode only, analog mode is not supported.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 19 Apr 2008 04:06:25 +0000 (01:06 -0300)]
V4L/DVB (7644): Adding support for the NXP TDA10048HN DVB OFDM demodulator
Adding support for the NXP TDA10048HN DVB OFDM demodulator
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 5 Apr 2008 19:45:57 +0000 (16:45 -0300)]
V4L/DVB (7642): cx88: enable radio GPIO correctly
cx88: enable radio GPIO correctly.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Kay Sievers [Fri, 18 Apr 2008 01:55:29 +0000 (22:55 -0300)]
V4L/DVB (7641): V4L: ov511 - use usb_interface as parent, not usb_device
The current code creates a bogus DEVPATH:
/devices/pci0000:00/0000:00:1d.0/usb1/1-2/video4linux/video0
while it should be:
/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/video4linux/video0
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sat, 19 Apr 2008 01:24:01 +0000 (22:24 -0300)]
V4L/DVB (7639): au8522: fix a small bug introduced by Checkpatch cleanup
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Sat, 19 Apr 2008 01:12:52 +0000 (22:12 -0300)]
V4L/DVB (7638): CodingStyle fixes for au8522 and au0828
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Fri, 18 Apr 2008 01:30:22 +0000 (22:30 -0300)]
V4L/DVB (7637): au0828: Typo
au0828: Typo
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Fri, 18 Apr 2008 00:47:11 +0000 (21:47 -0300)]
V4L/DVB (7636): au0828: Add HVR850 model number
au0828: Add HVR850 model number
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Fri, 18 Apr 2008 00:45:08 +0000 (21:45 -0300)]
V4L/DVB (7635): au8522: Cleanup
au8522: Cleanup
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Fri, 18 Apr 2008 00:41:28 +0000 (21:41 -0300)]
V4L/DVB (7634): au0828: Cleanup
au0828: Cleanup
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Thu, 10 Apr 2008 07:24:56 +0000 (04:24 -0300)]
V4L/DVB (7633): au8522: consolidate mse2snr_lookup functions
consolidate au8522_qam256_mse2snr_lookup, au8522_qam64_mse2snr_lookup and
au8522_vsb_mse2snr_lookup into a single function, au8522_mse2snr_lookup.
Pass the mse2snr table into au8522_mse2snr_lookup depending on the
modulation type.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Thu, 10 Apr 2008 05:01:48 +0000 (02:01 -0300)]
V4L/DVB (7632): au8522: Added SNR support and basic cleanup
au8522: Added SNR support and basic cleanup
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Sun, 6 Apr 2008 02:13:05 +0000 (23:13 -0300)]
V4L/DVB (7631): au8522: add function au8522_read_mse
add function au8522_read_mse, which will be used to compute snr
TO DO: mse2snr
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Sun, 6 Apr 2008 02:08:08 +0000 (23:08 -0300)]
V4L/DVB (7630): au8522: fix au8522_read_ucblocks for qam
ucblocks are reported in separate registers for vsb & qam
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Wed, 2 Apr 2008 21:59:48 +0000 (18:59 -0300)]
V4L/DVB (7629): au8522: replace __FUNCTION__ with __func__
replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Wed, 2 Apr 2008 21:59:48 +0000 (18:59 -0300)]
V4L/DVB (7628): au8522: codingstyle cleanups
Fixed some checkpatch.pl warnings
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Sat, 19 Apr 2008 00:42:30 +0000 (21:42 -0300)]
V4L/DVB (7627): au0828: replace __FUNCTION__ with __func__
replace __FUNCTION__ with __func__ and clean associated checkpatch.pl
warnings.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Michael Krufky [Wed, 2 Apr 2008 21:59:48 +0000 (18:59 -0300)]
V4L/DVB (7626): Kconfig: VIDEO_AU0828 should select DVB_AU8522 and DVB_TUNER_XC5000
VIDEO_AU0828 should select DVB_AU8522 and DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 19 Apr 2008 00:39:11 +0000 (21:39 -0300)]
V4L/DVB (7625): au0828: Cleanup
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Wed, 2 Apr 2008 04:10:40 +0000 (01:10 -0300)]
V4L/DVB (7624): Avoid an oops if the board is not fully defined
Avoid an oops if the board is not fully defined.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Tue, 1 Apr 2008 04:27:41 +0000 (01:27 -0300)]
V4L/DVB (7623): Scripts to maintain the CARDLIST file
Scripts to maintain the CARDLIST file.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 29 Mar 2008 22:53:07 +0000 (19:53 -0300)]
V4L/DVB (7622): HVR950Q Hauppauge eeprom support
HVR950Q Hauppauge eeprom support.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 19 Apr 2008 00:34:00 +0000 (21:34 -0300)]
V4L/DVB (7621): Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USB
Including support for the AU0828 USB Bridge.
Including support for the AU8522 ATSC/QAM Demodulator.
Including support for the AU8522 ATSC/QAM Demodulator.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Steven Toth [Sat, 29 Mar 2008 21:15:33 +0000 (18:15 -0300)]
V4L/DVB (7620): Adding support for a new i2c bridge type
Adding support for a new i2c bridge type
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 21:37:25 +0000 (18:37 -0300)]
V4L/DVB (7619): em28xx: adds proper demod IF for HVR-900
Thanks to Aidan Thornton <makosoft@googlemail.com> for helping
to test this firmware
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 21:34:31 +0000 (18:34 -0300)]
V4L/DVB (7618): em28xx: make some symbols static
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:49:59 +0000 (21:49 -0300)]
V4L/DVB (7617): Removes a manual mode setup
The setup is already done at open().
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:49:20 +0000 (21:49 -0300)]
V4L/DVB (7616): em28xx-dvb: Properly selects digital mode at the right place
The driver should be switched to digital mode, when trying to access the
frontend or when streaming.
This patch provides the correct code to support this feature.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:48:00 +0000 (21:48 -0300)]
V4L/DVB (7615): em28xx: Provide the proper support for switching between analog/digital
Before this patch, HVR900/HVR950 were incorreclty going back to analog. The
result is that only digital were working.
This patch provides the proper setup for analog/digital and tuner callback.
It also properly resets analog into a sane state at open().
Thanks to Steven Toth <stoth@linuxtv.org> and Michael Krufky <mkrufky@linuxtv.org>
for helping to set the proper parameters to GPO/GPIO em2883 ports.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:46:14 +0000 (21:46 -0300)]
V4L/DVB (7614): em28xx-core: fix some debug printk's that wrongly received KERN_INFO
Those printk's were adding more info to a line that were already being
printed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:44:58 +0000 (21:44 -0300)]
V4L/DVB (7613): em28xx: rename registers
Now, all registers will follow the same convension:
EM28XX_R<reg_number>_<reg_name>
This allows to associate a register with its value, and also with a canonical
name. Also, registers that are specific to a given chip were renamed accordingly,
as EM2800_foo (for 2800 only registers) or EM2880_foo (for registers that started
to appear on em2880).
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:43:38 +0000 (21:43 -0300)]
V4L/DVB (7612): em28xx-cards: use register names for GPIO/GPO
Before this patch, registers 0x04 and 0x08 were referenced by its value. This is
bad, since makes harder for someone to understand what this is doing.
This patch renames those two registers into an appropriate name.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:42:58 +0000 (21:42 -0300)]
V4L/DVB (7611): em28xx: Move registers to a separate file
em28xx.h contains lots of different stuff inside. The better is to break it on
some files.
This patch removes the register names, moving them to a separate file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:42:14 +0000 (21:42 -0300)]
V4L/DVB (7610): em28xx: Select reg wait time based on chip ID
This is more conservative than just removing the msleep() from
em28xx_write_regs_req(), since some old hardware may still need it.
So, it will remove the sleep time only for those chips where this
removal were tested.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Devin Heitmueller [Fri, 18 Apr 2008 00:41:23 +0000 (21:41 -0300)]
V4L/DVB (7609): em28xx-core: speed-up firmware load
em28xx-core.c:
- Remove sleep in i2c message routine which slows down i2c by a factor
10x. Load time for BASE firmware went from 13s to .973s
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Devin Heitmueller [Fri, 18 Apr 2008 00:41:16 +0000 (21:41 -0300)]
V4L/DVB (7608): em28xx-dvb: Some cleanups and fixes
em28xx-dvb.c:
- Remove unneeded xc3028_ctrl structure. The driver automatically preserves
the previous value
tuner-xc2028.c:
- Make the return type for xc2028_get_reg signed, since all of the callers
are looking for "< 0" to detect errors.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Douglas Schilling Landgraf [Fri, 18 Apr 2008 00:41:10 +0000 (21:41 -0300)]
V4L/DVB (7607): CodingStyle fixes
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:41:00 +0000 (21:41 -0300)]
V4L/DVB (7606): em28xx-dvb: Program GPO as well
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:40:53 +0000 (21:40 -0300)]
V4L/DVB (7605): tuner-xc3028: Avoids too much firmware reloads
xc3028_sleep function is being used with a different meaning. This
should be called only before doing S1/S3 sleep.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Mauro Carvalho Chehab [Fri, 18 Apr 2008 00:40:45 +0000 (21:40 -0300)]
V4L/DVB (7604): em28xx-dvb: Fix analog mode
The analog entries are wrong. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / log