GitHub/exynos8895/android_kernel_samsung_universal8895.git
12 years agoASoC: Convert ak4535 to devm_kzalloc()
Axel Lin [Tue, 20 Dec 2011 06:38:09 +0000 (14:38 +0800)]
ASoC: Convert ak4535 to devm_kzalloc()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Convert ak4104 to devm_kzalloc()
Axel Lin [Tue, 20 Dec 2011 06:37:12 +0000 (14:37 +0800)]
ASoC: Convert ak4104 to devm_kzalloc()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Tegra+WM8903 machine: Add device tree binding
Stephen Warren [Mon, 12 Dec 2011 22:55:36 +0000 (15:55 -0700)]
ASoC: Tegra+WM8903 machine: Add device tree binding

This driver is parameterized in two ways:

a) Platform data, which supplies the set of GPIOs used by the driver.
   These GPIOs can now be parsed out of device tree.

b) Machine-specific DAPM route arrays embedded into the ASoC machine
   driver itself. Historically, the driver picks the appropriate array
   to use using machine_is_*(). The driver now requires this array to
   be parsed from device tree when instantiated through device tree,
   using the core ASoC support for this parsing.

Based on work by John Bonesio, but significantly reworked since then.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Add utility to parse DAPM routes from device tree
Stephen Warren [Mon, 12 Dec 2011 22:55:35 +0000 (15:55 -0700)]
ASoC: Add utility to parse DAPM routes from device tree

Implement snd_soc_of_parse_audio_routing(), a utility function that can
parses a simple DAPM route table from device tree.The machine driver
specifies the DT property to use, since this is binding-specific.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Add utility to set a card's name from device tree
Stephen Warren [Mon, 12 Dec 2011 22:55:34 +0000 (15:55 -0700)]
ASoC: Add utility to set a card's name from device tree

Implement snd_soc_of_parse_card_name(), a utility function that sets a
card's name from device tree. The machine driver specifies the DT
property to use, since this is binding-specific.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Rename rt562[1|2]_vol_snd_controls to alc562[1|2]_vol_snd_controls
Axel Lin [Thu, 15 Dec 2011 03:57:57 +0000 (11:57 +0800)]
ASoC: Rename rt562[1|2]_vol_snd_controls to alc562[1|2]_vol_snd_controls

The module desciption says this is ASoC alc5621/2/3 driver.
Make the naming consistent with the reset of the code.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoMerge branch 'for-3.2' into for-3.3
Mark Brown [Tue, 20 Dec 2011 00:53:23 +0000 (00:53 +0000)]
Merge branch 'for-3.2' into for-3.3

12 years agoASoC: Use dai_fmt in snappercl15 machine driver
Axel Lin [Sat, 17 Dec 2011 07:41:11 +0000 (15:41 +0800)]
ASoC: Use dai_fmt in snappercl15 machine driver

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Use dai_fmt in edb93xx machine driver
Axel Lin [Sat, 17 Dec 2011 07:36:52 +0000 (15:36 +0800)]
ASoC: Use dai_fmt in edb93xx machine driver

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Alexander Sverdlin <subaparts@yandex.ru>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: mxs: correct 'direction' of device_prep_dma_cyclic
Shawn Guo [Wed, 14 Dec 2011 07:47:46 +0000 (15:47 +0800)]
ASoC: mxs: correct 'direction' of device_prep_dma_cyclic

The commit 49920bc (dmaengine: add new enum dma_transfer_direction)
changes the type of parameter 'direction' of device_prep_dma_cyclic
from dma_data_direction to dma_transfer_direction.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Remove export of s3c_pcm_dai
Axel Lin [Wed, 14 Dec 2011 11:13:26 +0000 (19:13 +0800)]
ASoC: Remove export of s3c_pcm_dai

We don't need to export s3c_pcm_dai after multi-component patch.
Thus remove export of s3c_pcm_dai and make it static.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Tegra machine ASoC driver for boards using ALC5332 codec
Leon Romanovsky [Mon, 19 Dec 2011 19:51:52 +0000 (21:51 +0200)]
ASoC: Tegra machine ASoC driver for boards using ALC5332 codec

At this stage only Toshiba AC100/Dynabook supported.

Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Andrey Danin <danindrey@mail.ru>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Convert uda1380 to table based DAPM and control init
Axel Lin [Mon, 19 Dec 2011 05:54:38 +0000 (13:54 +0800)]
ASoC: Convert uda1380 to table based DAPM and control init

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Convert max9850 to table based DAPM and control init
Axel Lin [Mon, 19 Dec 2011 05:13:31 +0000 (13:13 +0800)]
ASoC: Convert max9850 to table based DAPM and control init

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Use standard cache sync code in wm8961
Mark Brown [Fri, 16 Dec 2011 06:57:11 +0000 (07:57 +0100)]
ASoC: Use standard cache sync code in wm8961

We write the reset register with the default value so it should not be
mistakenly written.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Convert wm8961 to devm_kzalloc()
Mark Brown [Fri, 16 Dec 2011 06:56:02 +0000 (07:56 +0100)]
ASoC: Convert wm8961 to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Remove I2C ifdefs from wm8961 driver
Mark Brown [Fri, 16 Dec 2011 06:55:02 +0000 (07:55 +0100)]
ASoC: Remove I2C ifdefs from wm8961 driver

The driver only supports I2C so no need to conditionalise its use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: Convert WM8960 to devm_kzalloc()
Mark Brown [Fri, 16 Dec 2011 06:42:58 +0000 (07:42 +0100)]
ASoC: Convert WM8960 to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: pxa: Convert e800_wm9712 to use snd_soc_register_card()
Axel Lin [Thu, 15 Dec 2011 02:54:25 +0000 (10:54 +0800)]
ASoC: pxa: Convert e800_wm9712 to use snd_soc_register_card()

Use snd_soc_register_card() instead of creating a "soc-audio" platform device.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: pxa: Convert tosa to use snd_soc_register_card()
Axel Lin [Thu, 15 Dec 2011 02:57:22 +0000 (10:57 +0800)]
ASoC: pxa: Convert tosa to use snd_soc_register_card()

Use snd_soc_register_card() instead of creating a "soc-audio" platform device.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: pxa: Convert imote2 to use snd_soc_register_card()
Axel Lin [Thu, 15 Dec 2011 02:55:24 +0000 (10:55 +0800)]
ASoC: pxa: Convert imote2 to use snd_soc_register_card()

Use snd_soc_register_card() instead of creating a "soc-audio" platform device.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: pxa: Convert e750_wm9705 to use snd_soc_register_card()
Axel Lin [Thu, 15 Dec 2011 02:53:29 +0000 (10:53 +0800)]
ASoC: pxa: Convert e750_wm9705 to use snd_soc_register_card()

Use snd_soc_register_card() instead of creating a "soc-audio" platform device.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: pxa: Convert e740_wm9705 to use snd_soc_register_card()
Axel Lin [Thu, 15 Dec 2011 02:52:42 +0000 (10:52 +0800)]
ASoC: pxa: Convert e740_wm9705 to use snd_soc_register_card()

Use snd_soc_register_card() instead of creating a "soc-audio" platform device.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoASoC: omap-mcbsp: Enable FIFO usage on OMAP4
Peter Ujfalusi [Thu, 15 Dec 2011 09:32:27 +0000 (11:32 +0200)]
ASoC: omap-mcbsp: Enable FIFO usage on OMAP4

Allow McBSP FIFO configuration from ASoC dai driver
on OMAP4 platform.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoOMAP4: mcbsp: Enable FIFO usage
Peter Ujfalusi [Thu, 15 Dec 2011 09:32:26 +0000 (11:32 +0200)]
OMAP4: mcbsp: Enable FIFO usage

All McBSP instances on OMAP4 has 128 word long FIFO

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 years agoMerge branch 'topic/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Mark Brown [Sat, 17 Dec 2011 09:05:46 +0000 (10:05 +0100)]
Merge branch 'topic/asoc' of git://git./linux/kernel/git/tiwai/sound into for-3.3

12 years agoASoC: Fix compile error in sound/soc/mid-x86/sst_platform.c
Joerg Roedel [Thu, 15 Dec 2011 17:24:54 +0000 (18:24 +0100)]
ASoC: Fix compile error in sound/soc/mid-x86/sst_platform.c

The variable ret_val is used but not declared. This causes
the following compile error:

sound/soc/mid-x86/sst_platform.c: In function ‘sst_platform_open’:
sound/soc/mid-x86/sst_platform.c:274:2: error: ‘ret_val’ undeclared (first use in this function)
sound/soc/mid-x86/sst_platform.c:274:2: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [sound/soc/mid-x86/sst_platform.o] Error 1

Fix this.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
13 years agoASoC: Staticise mfld_msic_dailink
Axel Lin [Wed, 14 Dec 2011 11:23:01 +0000 (19:23 +0800)]
ASoC: Staticise mfld_msic_dailink

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Fix partial cherry pick in wm8993
Mark Brown [Thu, 15 Dec 2011 03:54:00 +0000 (11:54 +0800)]
ASoC: Fix partial cherry pick in wm8993

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Use core pm_runtime callbacks for fsi
Mark Brown [Sat, 3 Dec 2011 20:22:18 +0000 (20:22 +0000)]
ASoC: Use core pm_runtime callbacks for fsi

Now that the core holds a pm_runtime reference to the device while the
link is active there is no need for the driver to do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Use core pm_runtime callbacks for siu_dai
Mark Brown [Sat, 3 Dec 2011 20:21:32 +0000 (20:21 +0000)]
ASoC: Use core pm_runtime callbacks for siu_dai

Now that the core holds a pm_runtime reference to the device while the
link is active there is no need for the driver to do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Tune the accessory detection rates for WM8996
Mark Brown [Wed, 14 Dec 2011 11:23:37 +0000 (19:23 +0800)]
ASoC: Tune the accessory detection rates for WM8996

Use longer intervals when the microphone is not inserted to increase
robustness against leisurely insertion.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agomfd: Test for jack detection when deciding if wm8994 should suspend
Mark Brown [Thu, 1 Dec 2011 17:19:44 +0000 (17:19 +0000)]
mfd: Test for jack detection when deciding if wm8994 should suspend

The jack detection on WM1811 is often required during system suspend, add
it as another check when deciding if we should suspend.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agoASoC: Use standard register cache sync in wm8993
Mark Brown [Wed, 14 Dec 2011 03:40:59 +0000 (11:40 +0800)]
ASoC: Use standard register cache sync in wm8993

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Convert wm8993 to devm_kzalloc()
Mark Brown [Wed, 14 Dec 2011 03:11:52 +0000 (11:11 +0800)]
ASoC: Convert wm8993 to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Use standard snd_soc_cache_sync() for WM9090
Mark Brown [Tue, 13 Dec 2011 13:04:26 +0000 (21:04 +0800)]
ASoC: Use standard snd_soc_cache_sync() for WM9090

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Remove cache default for volatile wm9081 reset register
Mark Brown [Tue, 13 Dec 2011 10:30:03 +0000 (18:30 +0800)]
ASoC: Remove cache default  for volatile wm9081 reset register

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Staticise sst_pcm_new and sst_soc_platform_drv
Axel Lin [Tue, 13 Dec 2011 09:13:45 +0000 (17:13 +0800)]
ASoC: Staticise sst_pcm_new and sst_soc_platform_drv

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by Vinod Koul <vinod.koul@linux.intel.com>
Acked-by: Lu Guanqun <guanqun.lu@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Remove unused extern declarations for sh4_hac_dai and sh7760_soc_platform
Axel Lin [Tue, 13 Dec 2011 12:23:50 +0000 (20:23 +0800)]
ASoC: Remove unused extern declarations for sh4_hac_dai and sh7760_soc_platform

Both sh4_hac_dai and sh7760_soc_platform are changed to static
by multi-component patch and they are not used in sh7760-ac97.c now.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Complete initialisation before registering Samsung PCM DAI
Mark Brown [Mon, 12 Dec 2011 11:05:58 +0000 (19:05 +0800)]
ASoC: Complete initialisation before registering Samsung PCM DAI

Otherwise there's a race where the DAI might get used without everything
having been set up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
13 years agoASoC: Staticise asoc_idma_platform
Mark Brown [Mon, 12 Dec 2011 14:47:25 +0000 (22:47 +0800)]
ASoC: Staticise asoc_idma_platform

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Sangbeom Kim <sbkim73@samsung.com>
13 years agoASoC: Fix wm8995 regmap usage
Mark Brown [Wed, 14 Dec 2011 03:20:42 +0000 (11:20 +0800)]
ASoC: Fix wm8995 regmap usage

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Rename ALC5632 MICBIAS to common name convention.
Leon Romanovsky [Mon, 12 Dec 2011 19:43:45 +0000 (21:43 +0200)]
ASoC: Rename ALC5632 MICBIAS to common name convention.

Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoMerge branch 'topic/cache' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Mark Brown [Tue, 13 Dec 2011 05:26:25 +0000 (13:26 +0800)]
Merge branch 'topic/cache' of git://git./linux/kernel/git/broonie/regmap into for-3.3

13 years agoregmap: Move initialization of regcache related fields to regcache_init
Lars-Peter Clausen [Wed, 16 Nov 2011 15:28:16 +0000 (16:28 +0100)]
regmap: Move initialization of regcache related fields to regcache_init

Move the initialization regcache related fields of the regmap struct to
regcache_init. This allows us to keep regmap and regcache code better
separated.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Staticise alchemy_pcm_soc_platform
Axel Lin [Tue, 13 Dec 2011 02:15:40 +0000 (10:15 +0800)]
ASoC: Staticise alchemy_pcm_soc_platform

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Staticise au1xpsc_soc_platform
Axel Lin [Tue, 13 Dec 2011 02:14:30 +0000 (10:14 +0800)]
ASoC: Staticise au1xpsc_soc_platform

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Staticise rx51_aux_dev
Axel Lin [Tue, 13 Dec 2011 02:13:13 +0000 (10:13 +0800)]
ASoC: Staticise rx51_aux_dev

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Remove rbtree register cache
Mark Brown [Thu, 10 Nov 2011 17:39:40 +0000 (17:39 +0000)]
ASoC: Remove rbtree register cache

All users now use regmap directly so delete the ASoC version of the code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Remove WM8994 register cache
Mark Brown [Tue, 25 Oct 2011 14:13:12 +0000 (16:13 +0200)]
ASoC: Remove WM8994 register cache

Now that the mfd is using the register map cache there's no need for the
CODEC driver to do any register cache management or any funny dances to
interact with the other drivers using the device so just remove the cache
initialisation and volatility information.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Remove ASoC-specific WM8994 I/O code
Mark Brown [Sun, 24 Jul 2011 11:49:52 +0000 (12:49 +0100)]
ASoC: Remove ASoC-specific WM8994 I/O code

Just go directly to the regmap API, saving code and making integration
that bit more direct.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoMerge branch 'mfd/wm8994' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Mark Brown [Mon, 12 Dec 2011 16:19:20 +0000 (00:19 +0800)]
Merge branch 'mfd/wm8994' of git://git./linux/kernel/git/broonie/misc into for-3.3

13 years agomfd: Convert wm8994 to use generic regmap irq_chip
Mark Brown [Tue, 25 Oct 2011 08:19:04 +0000 (10:19 +0200)]
mfd: Convert wm8994 to use generic regmap irq_chip

Factor out the irq_chip implementation, substantially reducing the code
size for the driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agoMerge branch 'topic/irq' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Mark Brown [Mon, 12 Dec 2011 16:12:48 +0000 (00:12 +0800)]
Merge branch 'topic/irq' of git://git./linux/kernel/git/broonie/regmap into wm8994-mfd

13 years agomfd: Mark WM1811 GPIO6 register volatile for later revisions
Mark Brown [Thu, 1 Dec 2011 13:55:49 +0000 (13:55 +0000)]
mfd: Mark WM1811 GPIO6 register volatile for later revisions

For later chip revisions the WM1811 GPIO6 register is always volatile so
store the device revision when initialising the driver and then check at
runtime if we're running on a newer device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Add missing mutex.h inclusion to WM8994 core.h
Mark Brown [Thu, 1 Dec 2011 13:53:18 +0000 (13:53 +0000)]
mfd: Add missing mutex.h inclusion to WM8994 core.h

struct wm8994 includes a mutex so we need to include mutex.h before we
declare it. All current users rely on this being done implicitly.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Add WM1811A device ID to wm8994 driver
Mark Brown [Wed, 30 Nov 2011 20:16:42 +0000 (20:16 +0000)]
mfd: Add WM1811A device ID to wm8994 driver

The WM1811A is a variant of the WM1811 with pin configuration changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Correct revision display for WM1811 revision D
Mark Brown [Wed, 30 Nov 2011 16:51:04 +0000 (16:51 +0000)]
mfd: Correct revision display for WM1811 revision D

As WM1811 revision C was transparent to software the revision IDs for
subsequent revisions are one less than they would normally be. Correct
for this in log messages.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Constify WM8994 regulator_init_data
Mark Brown [Mon, 28 Nov 2011 18:48:14 +0000 (18:48 +0000)]
mfd: Constify WM8994 regulator_init_data

The driver has no need to modify the regulator_init_data so declare it
const to allow machine code to do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Initialise WM8994 register cache after reading chip ID registers
Mark Brown [Sat, 3 Dec 2011 17:10:32 +0000 (17:10 +0000)]
mfd: Initialise WM8994 register cache after reading chip ID registers

The different devices handled by the WM8994 can be distinguished using
their ID registers so we don't need to rely on the user having registered
the device correctly. Instead do the initial regmap setup with a minimal
configuration only supporting physical I/O and then configure the cache
once we have identified the device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Enable register cache for wm8994 devices
Mark Brown [Tue, 25 Oct 2011 12:23:53 +0000 (14:23 +0200)]
mfd: Enable register cache for wm8994 devices

As part of this we provide information about the registers that exist in
the device to the regmap core, drop the small amount of cache that the
core had been using and let regmap do the sync.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agoMerge branch 'topic/cache' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Mark Brown [Mon, 12 Dec 2011 16:10:45 +0000 (00:10 +0800)]
Merge branch 'topic/cache' of git://git./linux/kernel/git/broonie/regmap into HEAD

13 years agomfd: Add wm8994 register access and default information
Mark Brown [Fri, 19 Aug 2011 09:37:58 +0000 (18:37 +0900)]
mfd: Add wm8994 register access and default information

Describe the register map to the regmap core so that we can use its
diagnostic features and cache support.  This is split out from the patch
using it due to the size so that the actual code change is a bit clearer.

As the various devices are supersets of each other the access maps are
built up by layering the functions on top of each other, though the
interface for specifying the register defaults isn't currently amenable
to this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Define some additional wm8994 registers
Mark Brown [Tue, 25 Oct 2011 13:44:12 +0000 (15:44 +0200)]
mfd: Define some additional wm8994 registers

Add a bunch of definitions for wm8994 registers that are not currently
used by software.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Don't hard code the reset value for WM8994 devices
Mark Brown [Tue, 25 Oct 2011 11:25:43 +0000 (13:25 +0200)]
mfd: Don't hard code the reset value for WM8994 devices

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Disable more pulls on WM8994
Mark Brown [Thu, 3 Nov 2011 13:20:38 +0000 (13:20 +0000)]
mfd: Disable more pulls on WM8994

Disable more pulls by default on WM8994 for a small current saving. Since
some designs do leave SPKMODE floating provide platform data to allow that
to be left enabled.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Convert wm8994 to devm_kzalloc()
Mark Brown [Tue, 25 Oct 2011 11:45:40 +0000 (13:45 +0200)]
mfd: Convert wm8994 to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Add basic device tree binding for wm8994
Mark Brown [Tue, 22 Nov 2011 18:22:29 +0000 (18:22 +0000)]
mfd: Add basic device tree binding for wm8994

Add a placeholder device tree binding for the wm8994 driver. At present
the binding is essentially null as none of the platform data is supported,
and at least some of that will depend on the pending regulator bindings.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
13 years agomfd: Remove some unused functions in wm8894-irq
Mark Brown [Mon, 24 Oct 2011 13:05:19 +0000 (15:05 +0200)]
mfd: Remove some unused functions in wm8894-irq

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Oritz <sameo@linux.intel.com>
13 years agoASoC: Add missed MODULE_LICENSE("GPL") for imx-pcm-fiq
Axel Lin [Mon, 12 Dec 2011 08:01:15 +0000 (16:01 +0800)]
ASoC: Add missed MODULE_LICENSE("GPL") for imx-pcm-fiq

This driver can be built as module and the file header indicates that
the driver is published under the GPL.
Thus add MODULE_LICENSE("GPL") for it.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Raise Speyside audio system clock rate to 512fs
Mark Brown [Sun, 11 Dec 2011 03:31:22 +0000 (11:31 +0800)]
ASoC: Raise Speyside audio system clock rate to 512fs

To support advanced system functionality for additional components; the
actively used clocks will remain the same for current components. Also
factor the rate out to a single #define while we're at it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoMerge branch 'for-3.2' into for-3.3
Mark Brown [Mon, 12 Dec 2011 04:59:06 +0000 (12:59 +0800)]
Merge branch 'for-3.2' into for-3.3

13 years agoASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card fails
Axel Lin [Mon, 12 Dec 2011 03:26:00 +0000 (11:26 +0800)]
ASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card fails

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: WM8958: correctly show firmware magic on mismatch
Jonathan Neuschäfer [Sun, 11 Dec 2011 18:15:49 +0000 (19:15 +0100)]
ASoC: WM8958: correctly show firmware magic on mismatch

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoMerge branch 'for-3.2' into for-3.3
Mark Brown [Sun, 11 Dec 2011 03:24:44 +0000 (11:24 +0800)]
Merge branch 'for-3.2' into for-3.3

Conflicts:
sound/soc/mxs/mxs-pcm.c

13 years agoASoC: Fix an obvious copy paste error in an error message
Lothar Waßmann [Fri, 9 Dec 2011 13:16:29 +0000 (14:16 +0100)]
ASoC: Fix an obvious copy paste error in an error message

The message was obviously copied from soc_init_codec_debugfs()

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: mxs: Add appropriate MODULE_ALIAS()
Lothar Waßmann [Fri, 9 Dec 2011 13:38:12 +0000 (14:38 +0100)]
ASoC: mxs: Add appropriate MODULE_ALIAS()

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: mxs: Add missing MODULE_LICENSE("GPL")
Lothar Waßmann [Fri, 9 Dec 2011 13:38:11 +0000 (14:38 +0100)]
ASoC: mxs: Add missing MODULE_LICENSE("GPL")

The sound driver refuses to load as module, because of the missing
MODULE_LICENSE("GPL").
The file header indicates that the driver is indeed published under
the GPL.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoMerge branch 'for-3.2' into for-3.3
Mark Brown [Sat, 10 Dec 2011 19:01:33 +0000 (03:01 +0800)]
Merge branch 'for-3.2' into for-3.3

13 years agoASoC: Fix WM8996 24.576MHz clock operation
Mark Brown [Sat, 10 Dec 2011 12:38:32 +0000 (20:38 +0800)]
ASoC: Fix WM8996 24.576MHz clock operation

Record the clock after the divider as that is what all SYSCLK users see.
Without this the other clock configuration in the device comes out at
half rate.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org
13 years agoASoC: Convert wm8770 to devm_kzalloc()
Mark Brown [Thu, 8 Dec 2011 08:24:16 +0000 (16:24 +0800)]
ASoC: Convert wm8770 to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Fix comments for disabling amplifier and PGA
Axel Lin [Fri, 9 Dec 2011 10:43:20 +0000 (18:43 +0800)]
ASoC: Fix comments for disabling amplifier and PGA

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Convert WM8900 to table based DAPM and control init
Mark Brown [Thu, 8 Dec 2011 08:53:47 +0000 (16:53 +0800)]
ASoC: Convert WM8900 to table based DAPM and control init

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Convert WM8804 to table based control init
Mark Brown [Thu, 8 Dec 2011 08:52:19 +0000 (16:52 +0800)]
ASoC: Convert WM8804 to table based control init

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Make WM8770 SPI usage unconditional
Mark Brown [Thu, 8 Dec 2011 08:46:59 +0000 (16:46 +0800)]
ASoC: Make WM8770 SPI usage unconditional

The device only supports SPI.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Convert WM8776 to devm_kzalloc()
Mark Brown [Thu, 8 Dec 2011 08:45:22 +0000 (16:45 +0800)]
ASoC: Convert WM8776 to devm_kzalloc()

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Refactor some conditions and loop in soc_bind_dai_link()
Stephen Warren [Wed, 7 Dec 2011 20:58:27 +0000 (13:58 -0700)]
ASoC: Refactor some conditions and loop in soc_bind_dai_link()

Transform some loops from:

for_each(x) {
    if (f(x)) {
        work_on(x);
    }
}

to new structure:

for_each(x) {
    if (!f(x))
        continue;

    work_on(x);
}

This will allow future modification of f(x) with less impact to the code.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Tegra: Move DAS configuration into DAS driver
Stephen Warren [Wed, 7 Dec 2011 20:58:29 +0000 (13:58 -0700)]
ASoC: Tegra: Move DAS configuration into DAS driver

Move DAS routing setup into the DAS driver itself. This removes the need
to duplicate this in each machine driver, of which we'll soon have three.

An added advantage is that the machine drivers no longer call the Tegra20-
specific DAS functions by name, so the machine driver no longer needs to
be split up into Tegra20 and Tegra30 versions.

If individual machine drivers need a different routing setup to this
default, they can still call the DAS functions to set that up.

Long-term, DAS will be a codec driver, and user-space will be able to
control its routing, possibly within constraints that the machine driver
sets up. Configuring the DAS routing from the DAS driver is a very slight
move in that direction.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: wm8960: Use snd_soc_update_bits for read-modify-write
Axel Lin [Thu, 8 Dec 2011 03:09:15 +0000 (11:09 +0800)]
ASoC: wm8960: Use snd_soc_update_bits for read-modify-write

Use snd_soc_update_bits for read-modify-write register access instead of
open-coding it using snd_soc_read and snd_soc_write

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Rely on core enabling the wm8994 with runtime PM
Mark Brown [Mon, 5 Dec 2011 15:17:36 +0000 (15:17 +0000)]
ASoC: Rely on core enabling the wm8994 with runtime PM

No need to do this in the driver now.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Take a pm_runtime reference on DAPM devices that are enabled
Mark Brown [Mon, 5 Dec 2011 15:17:06 +0000 (15:17 +0000)]
ASoC: Take a pm_runtime reference on DAPM devices that are enabled

As for PCMs take a runtime power management reference to devices that are
in a non-off bias, avoiding the need to do this in individual drivers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Use core pm_runtime callbacks for omap-mcpdm
Mark Brown [Sat, 3 Dec 2011 20:20:47 +0000 (20:20 +0000)]
ASoC: Use core pm_runtime callbacks for omap-mcpdm

Now that the core holds a pm_runtime reference to the device while the
link is active there is no need for the driver to do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
13 years agoASoC: Use core pm_runtime callbacks for omap-dmic
Mark Brown [Sat, 3 Dec 2011 20:20:02 +0000 (20:20 +0000)]
ASoC: Use core pm_runtime callbacks for omap-dmic

Now that the core holds a pm_runtime reference to the device while the
link is active there is no need for the driver to do so.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
13 years agoASoC: Hold runtime PM references to components of active DAIs
Mark Brown [Sat, 3 Dec 2011 20:14:31 +0000 (20:14 +0000)]
ASoC: Hold runtime PM references to components of active DAIs

Every device that implements runtime power management for DAIs is doing
it in pretty much the same way: in the startup callback they take a
runtime PM reference and then in the shutdown callback they release that
reference, keeping the device active while the DAI is active. Given the
frequency with which this is done and the obviousness of the need to keep
the device active in this period factor the code out into the core, taking
references on the device for each CPU DAI, CODEC DAI and DMA device in the
core.

As runtime PM is reference counted this shouldn't interfere with any
other reference holding by the drivers, and since (in common with the
existing implementations) we don't check for errors on enabling it
shouldn't matter if the device actually has runtime PM enabled or not.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
13 years agoMerge branch 'for-3.2' into for-3.3
Mark Brown [Wed, 7 Dec 2011 16:15:39 +0000 (00:15 +0800)]
Merge branch 'for-3.2' into for-3.3

13 years agoASoC: Convert e800_wm9712 to use gpio_request_one()
Axel Lin [Wed, 7 Dec 2011 02:03:12 +0000 (10:03 +0800)]
ASoC: Convert e800_wm9712 to use gpio_request_one()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Fix error handling in e800_init to free gpios
Axel Lin [Wed, 7 Dec 2011 02:01:30 +0000 (10:01 +0800)]
ASoC: Fix error handling in e800_init to free gpios

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Convert e750_wm9705 to use gpio_request_one()
Axel Lin [Wed, 7 Dec 2011 02:04:07 +0000 (10:04 +0800)]
ASoC: Convert e750_wm9705 to use gpio_request_one()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Fix a typo in s3c24xx_simtec_tlv320aic23 driver
Axel Lin [Wed, 7 Dec 2011 10:04:10 +0000 (18:04 +0800)]
ASoC: Fix a typo in s3c24xx_simtec_tlv320aic23 driver

Fix a typo introduced by commit e00c3f55
"ASoC: Convert Samsung directory to module_platform_driver".

This fixes the build error:
  CC      sound/soc/samsung/s3c24xx_simtec_tlv320aic23.o
sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c: In function 'simtec_audio_tlv320aic32_driver_init':
sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c:105: error: 'simtec_audio_tlv320aic32_driver' undeclared (first use in this function)
sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c:105: error: (Each undeclared identifier is reported only once
sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c:105: error: for each function it appears in.)
sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c: In function 'simtec_audio_tlv320aic32_driver_exit':
sound/soc/samsung/s3c24xx_simtec_tlv320aic23.c:105: error: 'simtec_audio_tlv320aic32_driver' undeclared (first use in this function)
make[3]: *** [sound/soc/samsung/s3c24xx_simtec_tlv320aic23.o] Error 1
make[2]: *** [sound/soc/samsung] Error 2
make[1]: *** [sound/soc] Error 2
make: *** [sound] Error 2

I think we had better naming it with *driver, thus I change
it to simtec_audio_tlv320aic23_driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
13 years agoASoC: Include linux/module.h for smdk2443_wm9710
Axel Lin [Wed, 7 Dec 2011 09:52:19 +0000 (17:52 +0800)]
ASoC: Include linux/module.h for smdk2443_wm9710

Include linux/module.h to fix below build error:
  CC      sound/soc/samsung/smdk2443_wm9710.o
sound/soc/samsung/smdk2443_wm9710.c:64: error: expected declaration specifiers or '...' before string constant
sound/soc/samsung/smdk2443_wm9710.c:64: warning: data definition has no type or storage class
sound/soc/samsung/smdk2443_wm9710.c:64: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR'
sound/soc/samsung/smdk2443_wm9710.c:64: warning: function declaration isn't a prototype
sound/soc/samsung/smdk2443_wm9710.c:65: error: expected declaration specifiers or '...' before string constant
sound/soc/samsung/smdk2443_wm9710.c:65: warning: data definition has no type or storage class
sound/soc/samsung/smdk2443_wm9710.c:65: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION'
sound/soc/samsung/smdk2443_wm9710.c:65: warning: function declaration isn't a prototype
sound/soc/samsung/smdk2443_wm9710.c:66: error: expected declaration specifiers or '...' before string constant
sound/soc/samsung/smdk2443_wm9710.c:66: warning: data definition has no type or storage class
sound/soc/samsung/smdk2443_wm9710.c:66: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE'
sound/soc/samsung/smdk2443_wm9710.c:66: warning: function declaration isn't a prototype
make[3]: *** [sound/soc/samsung/smdk2443_wm9710.o] Error 1
make[2]: *** [sound/soc/samsung] Error 2
make[1]: *** [sound/soc] Error 2
make: *** [sound] Error 2

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>