Brian King [Fri, 18 Aug 2017 21:17:32 +0000 (16:17 -0500)]
scsi: ipr: Set no_report_opcodes for RAID arrays
Since ipr RAID arrays do not support the MAINTENANCE_IN /
MI_REPORT_SUPPORTED_OPERATION_CODES, set no_report_opcodes to prevent it
from being sent.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Varun Prakash [Wed, 16 Aug 2017 14:10:32 +0000 (19:40 +0530)]
scsi: cxgb4i: call neigh_event_send() to update MAC address
If nud_state is not valid then call neigh_event_send() to update MAC
address.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Christoph Hellwig [Sun, 13 Aug 2017 17:44:22 +0000 (19:44 +0200)]
Revert "scsi: default to scsi-mq"
Defaulting to scsi-mq in 4.13-rc has shown various regressions
on setups that we didn't previously consider. Fixes for them are
in progress, but too invasive to make it in this cycle. So for
now revert the commit that defaults to blk-mq for SCSI. For 4.14
we'll plan to try again with these fixes.
This reverts commit
5c279bd9e40624f4ab6e688671026d6005b066fa.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Wed, 9 Aug 2017 03:00:22 +0000 (12:00 +0900)]
scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()
Releasing a zone write lock only when the write commnand that acquired
the lock completes can cause deadlocks due to potential command
reordering if the lock owning request is requeued and not executed. This
problem exists only with the scsi-mq path as, unlike the legacy path,
requests are moved out of the dispatch queue before being prepared and
so before locking a zone for a write command.
Since sd_uninit_cmnd() is now always called when a request is requeued,
call sd_zbc_write_unlock_zone() from that function for write requests
that acquired a zone lock instead of from sd_done(). Acquisition of a zone
lock by a write command is indicated using the new command
flag SCMD_ZONE_WRITE_LOCK.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Raghava Aditya Renukunta [Fri, 4 Aug 2017 10:51:41 +0000 (03:51 -0700)]
scsi: aacraid: Fix out of bounds in aac_get_name_resp
We terminate the aac_get_name_resp on a byte that is outside the bounds
of the structure. Extend the return response by one byte to remove the
out of bounds reference.
Fixes:
b836439faf04 ("aacraid: 4KB sector support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Varun Prakash [Mon, 31 Jul 2017 16:32:55 +0000 (22:02 +0530)]
scsi: csiostor: fail probe if fw does not support FCoE
Fail probe if FCoE capability is not enabled in the firmware.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
weiping zhang [Mon, 7 Aug 2017 17:26:57 +0000 (01:26 +0800)]
scsi: megaraid_sas: fix error handle in megasas_probe_one
megasas_mgmt_info.max_index has increased by 1 before megasas_io_attach,
if megasas_io_attach return error, then goto fail_io_attach,
megasas_mgmt_info.instance has a wrong index here. So first reduce
max_index and then set that instance to NULL.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Brian King [Tue, 1 Aug 2017 18:45:36 +0000 (13:45 -0500)]
scsi: ses: Fix wrong page error
If a SES device returns an error on a requested diagnostic page, we are
currently printing an error indicating the wrong page was received. Fix
this up to simply return a failure and only check the returned page when
the diagnostic page buffer was populated by the device.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Brian King [Tue, 1 Aug 2017 15:21:30 +0000 (10:21 -0500)]
scsi: ipr: Fix scsi-mq lockdep issue
Fixes the following lockdep warning that can occur when scsi-mq is
enabled with ipr due to ipr calling scsi_unblock_requests from irq
context. The fix is to move the call to scsi_unblock_requests to ipr's
existing workqueue.
stack backtrace:
CPU: 28 PID: 0 Comm: swapper/28 Not tainted
4.13.0-rc2-gcc6x-gf74c89b #1
Call Trace:
[
c000001fffe97550] [
c000000000b50818] dump_stack+0xe8/0x160 (unreliable)
[
c000001fffe97590] [
c0000000001586d0] print_usage_bug+0x2d0/0x390
[
c000001fffe97640] [
c000000000158f34] mark_lock+0x7a4/0x8e0
[
c000001fffe976f0] [
c00000000015a000] __lock_acquire+0x6a0/0x1a70
[
c000001fffe97860] [
c00000000015befc] lock_acquire+0xec/0x2e0
[
c000001fffe97930] [
c000000000b71514] _raw_spin_lock+0x44/0x70
[
c000001fffe97960] [
c0000000005b60f4] blk_mq_sched_dispatch_requests+0xa4/0x2a0
[
c000001fffe979c0] [
c0000000005acac0] __blk_mq_run_hw_queue+0x100/0x2c0
[
c000001fffe97a00] [
c0000000005ad478] __blk_mq_delay_run_hw_queue+0x118/0x130
[
c000001fffe97a40] [
c0000000005ad61c] blk_mq_start_hw_queues+0x6c/0xa0
[
c000001fffe97a80] [
c000000000797aac] scsi_kick_queue+0x2c/0x60
[
c000001fffe97aa0] [
c000000000797cf0] scsi_run_queue+0x210/0x360
[
c000001fffe97b10] [
c00000000079b888] scsi_run_host_queues+0x48/0x80
[
c000001fffe97b40] [
c0000000007b6090] ipr_ioa_bringdown_done+0x70/0x1e0
[
c000001fffe97bc0] [
c0000000007bc860] ipr_reset_ioa_job+0x80/0xf0
[
c000001fffe97bf0] [
c0000000007b4d50] ipr_reset_timer_done+0xd0/0x100
[
c000001fffe97c30] [
c0000000001937bc] call_timer_fn+0xdc/0x4b0
[
c000001fffe97cf0] [
c000000000193d08] expire_timers+0x178/0x330
[
c000001fffe97d60] [
c0000000001940c8] run_timer_softirq+0xb8/0x120
[
c000001fffe97de0] [
c000000000b726a8] __do_softirq+0x168/0x6d8
[
c000001fffe97ef0] [
c0000000000df2c8] irq_exit+0x108/0x150
[
c000001fffe97f10] [
c000000000017bf4] __do_irq+0x2a4/0x4a0
[
c000001fffe97f90] [
c00000000002da50] call_do_irq+0x14/0x24
[
c0000007fad93aa0] [
c000000000017e8c] do_IRQ+0x9c/0x140
[
c0000007fad93af0] [
c000000000008b98] hardware_interrupt_common+0x138/0x140
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bodo Stroesser [Tue, 1 Aug 2017 12:42:54 +0000 (14:42 +0200)]
scsi: st: fix blk_get_queue usage
If blk_queue_get() in st_probe fails, disk->queue must not be set to
SDp->request_queue, as that would result in put_disk() dropping a not
taken reference.
Thus, disk->queue should be set only after a successful blk_queue_get().
Fixes:
2b5bebccd282 ("st: Take additional queue ref in st_probe")
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Acked-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Michael Hernandez [Mon, 31 Jul 2017 21:45:10 +0000 (14:45 -0700)]
scsi: qla2xxx: Fix system crash while triggering FW dump
This patch fixes system hang/crash while firmware dump is attempted with
Block MQ enabled in qla2xxx driver. Fix is to remove check in fw dump
template entries for existing request and response queues so that full
buffer size is calculated during template size calculation.
Following stack trace is seen during firmware dump capture process
[ 694.390588] qla2xxx [0000:81:00.0]-5003:11: ISP System Error - mbx1=4b1fh mbx2=10h mbx3=2ah mbx7=0h.
[ 694.402336] BUG: unable to handle kernel paging request at
ffffc90008c7b000
[ 694.402372] IP: memcpy_erms+0x6/0x10
[ 694.402386] PGD
105f01a067
[ 694.402386] PUD
85f89c067
[ 694.402398] PMD
10490cb067
[ 694.402409] PTE 0
[ 694.402421]
[ 694.402437] Oops: 0002 [#1] PREEMPT SMP
[ 694.402452] Modules linked in: netconsole configfs qla2xxx scsi_transport_fc
nvme_fc nvme_fabrics bnep bluetooth rfkill xt_tcpudp unix_diag xt_multiport
ip6table_filter ip6_tables iptable_filter ip_tables x_tables af_packet
iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ipmi_ssif sb_edac edac_core
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass igb
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel iTCO_wdt
aes_x86_64 crypto_simd ptp iTCO_vendor_support glue_helper cryptd lpc_ich joydev
i2c_i801 pcspkr ioatdma mei_me pps_core tpm_tis mei mfd_core acpi_power_meter
tpm_tis_core ipmi_si ipmi_devintf tpm ipmi_msghandler shpchp wmi dca button
acpi_pad btrfs xor uas usb_storage hid_generic usbhid raid6_pq crc32c_intel ast
i2c_algo_bit drm_kms_helper syscopyarea sysfillrect
[ 694.402692] sysimgblt fb_sys_fops xhci_pci ttm ehci_pci sr_mod xhci_hcd
cdrom ehci_hcd drm usbcore sg
[ 694.402730] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-1-default+ #19
[ 694.402753] Hardware name: Supermicro X10DRi/X10DRi, BIOS 1.1a 10/16/2015
[ 694.402776] task:
ffffffff81c0e4c0 task.stack:
ffffffff81c00000
[ 694.402798] RIP: 0010:memcpy_erms+0x6/0x10
[ 694.402813] RSP: 0018:
ffff88085fc03cd0 EFLAGS:
00210006
[ 694.402832] RAX:
ffffc90008c7ae0c RBX:
0000000000000004 RCX:
000000000001fe0c
[ 694.402856] RDX:
0000000000020000 RSI:
ffff8810332c01f4 RDI:
ffffc90008c7b000
[ 694.402879] RBP:
ffff88085fc03d18 R08:
0000000000020000 R09:
0000000000279e0a
[ 694.402903] R10:
0000000000000000 R11:
f000000000000000 R12:
ffff88085fc03d80
[ 694.402927] R13:
ffffc90008a01000 R14:
ffffc90008a056d4 R15:
ffff881052ef17e0
[ 694.402951] FS:
0000000000000000(0000) GS:
ffff88085fc00000(0000) knlGS:
0000000000000000
[ 694.402977] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 694.403012] CR2:
ffffc90008c7b000 CR3:
0000000001c09000 CR4:
00000000001406f0
[ 694.403036] Call Trace:
[ 694.403047] <IRQ>
[ 694.403072] ? qla27xx_fwdt_entry_t263+0x18e/0x380 [qla2xxx]
[ 694.403099] qla27xx_walk_template+0x9d/0x1a0 [qla2xxx]
[ 694.403124] qla27xx_fwdump+0x1f3/0x272 [qla2xxx]
[ 694.403149] qla2x00_async_event+0xb08/0x1a50 [qla2xxx]
[ 694.403169] ? enqueue_task_fair+0xa2/0x9d0
Signed-off-by: Mike Hernandez <michael.hernandez@cavium.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Johannes Thumshirn [Thu, 27 Jul 2017 07:11:26 +0000 (09:11 +0200)]
scsi: sg: only check for dxfer_len greater than 256M
Don't make any assumptions on the sg_io_hdr_t::dxfer_direction or the
sg_io_hdr_t::dxferp in order to determine if it is a valid request. The
only way we can check for bad requests is by checking if the length
exceeds 256M.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes:
28676d869bbb (scsi: sg: check for valid direction before starting the
request)
Reported-by: Jason L Tibbitts III <tibbs@math.uh.edu>
Tested-by: Jason L Tibbitts III <tibbs@math.uh.edu>
Suggested-by: Doug Gilbert <dgilbert@interlog.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Tue, 25 Jul 2017 19:49:55 +0000 (22:49 +0300)]
scsi: aacraid: reading out of bounds
"qd.id" comes directly from the copy_from_user() on the line before so
we should verify that it's within bounds.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thomas Bogendoerfer [Tue, 25 Jul 2017 09:19:21 +0000 (11:19 +0200)]
scsi: qedf: Limit number of CQs
FCOE offloading failed with:
[qed_sp_fcoe_func_start:150(sp-0-3b:00.02)]Cannot satisfy CQ amount. CQs
requested 8, CQs available 6. Aborting function start
[qed_fcoe_start:821()]Failed to start fcoe
[__qedf_probe:3041]:6: Cannot start FCoE function.
The reason is a newly introduced check in the qed main part. This change
also provides the information about how many CQs are available, so we
simply limit the number of requested CQs..
Fixes:
3c5da9427802 ("qed: Share additional information with qedf")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thomas Gleixner [Mon, 24 Jul 2017 10:53:00 +0000 (12:53 +0200)]
scsi: bnx2i: Simplify cpu hotplug code
The CPU hotplug related code of this driver can be simplified by:
1) Consolidating the callbacks into a single state. The CPU thread can be
torn down on the CPU which goes offline. There is no point in delaying
that to the CPU dead state
2) Let the core code invoke the online/offline callbacks and remove the
extra for_each_online_cpu() loops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thomas Gleixner [Mon, 24 Jul 2017 10:52:59 +0000 (12:52 +0200)]
scsi: bnx2fc: Simplify CPU hotplug code
The CPU hotplug related code of this driver can be simplified by:
1) Consolidating the callbacks into a single state. The CPU thread can be
torn down on the CPU which goes offline. There is no point in delaying
that to the CPU dead state
2) Let the core code invoke the online/offline callbacks and remove the
extra for_each_online_cpu() loops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thomas Gleixner [Mon, 24 Jul 2017 10:52:58 +0000 (12:52 +0200)]
scsi: bnx2i: Prevent recursive cpuhotplug locking
The BNX2I module init/exit code installs/removes the hotplug callbacks with
the cpu hotplug lock held. This worked with the old CPU locking
implementation which allowed recursive locking, but with the new percpu
rwsem based mechanism this is not longer allowed.
Use the _cpuslocked() variants to fix this.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thomas Gleixner [Mon, 24 Jul 2017 10:52:57 +0000 (12:52 +0200)]
scsi: bnx2fc: Prevent recursive cpuhotplug locking
The BNX2FC module init/exit code installs/removes the hotplug callbacks with
the cpu hotplug lock held. This worked with the old CPU locking
implementation which allowed recursive locking, but with the new percpu
rwsem based mechanism this is not longer allowed.
Use the _cpuslocked() variants to fix this.
Reported-by: kernel test robot <fengguang.wu@intel.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thomas Gleixner [Mon, 24 Jul 2017 10:52:56 +0000 (12:52 +0200)]
scsi: bnx2fc: Plug CPU hotplug race
bnx2fc_process_new_cqes() has protection against CPU hotplug, which relies
on the per cpu thread pointer. This protection is racy because it happens
only partially with the per cpu fp_work_lock held.
If the CPU is unplugged after the lock is dropped, the wakeup code can
dereference a NULL pointer or access freed and potentially reused memory.
Restructure the code so the thread check and wakeup happens with the
fp_work_lock held.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Wed, 12 Jul 2017 07:31:21 +0000 (10:31 +0300)]
scsi: qedi: Fix return code in qedi_ep_connect()
We shouldn't be writing over the "ret" variable. It means we return
ERR_PTR(0) which is NULL and it results in a NULL dereference in the
caller.
Fixes:
ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Fri, 21 Jul 2017 20:53:46 +0000 (22:53 +0200)]
scsi: lpfc: fix linking against modular NVMe support
When LPFC is built-in but NVMe is a loadable module, we fail to link the
kernel:
drivers/scsi/built-in.o: In function `lpfc_nvme_create_localport':
(.text+0x156a82): undefined reference to `nvme_fc_register_localport'
drivers/scsi/built-in.o: In function `lpfc_nvme_destroy_localport':
(.text+0x156eaa): undefined reference to `nvme_fc_unregister_remoteport'
We can avoid this either by forcing lpfc to be a module, or by disabling
NVMe support in this case. This implements the former.
Fixes:
7d7080335f8d ("scsi: lpfc: Finalize Kconfig options for nvme")
Cc: stable@vger.kernel.org
Link: https://patchwork.kernel.org/patch/9636569/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Mon, 24 Jul 2017 10:09:36 +0000 (12:09 +0200)]
scsi: scsi_transport_fc: return -EBUSY for deleted vport
When trying to delete a vport via 'vport_delete' sysfs attribute we
should be checking if the port is already in state VPORT_DELETING; if so
there's no need to do anything.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Varun Prakash [Sun, 23 Jul 2017 14:31:32 +0000 (20:01 +0530)]
scsi: libcxgbi: add check for valid cxgbi_task_data
In error case it is possible that ->cleanup_task() gets called without
calling ->alloc_pdu() in this case cxgbi_task_data is not valid, so add
a check for for valid cxgbi_task_data in cxgbi_cleanup_task().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jakub Kicinski [Wed, 19 Jul 2017 01:58:34 +0000 (18:58 -0700)]
scsi: aic7xxx: fix firmware build with O=path
Building firmware with O=path was apparently broken in aic7 for ever.
Message of the previous commit to the Makefile (from 2008) mentions this
unfortunate state of affairs already. Fix this, mostly to make
randconfig builds more reliable.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shu Wang [Fri, 21 Jul 2017 10:54:09 +0000 (18:54 +0800)]
scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion
Found this issue by kmemleak, a few kb mem was leaked in
megasas_alloc_cmdlist_fusion when kzalloc failed for one
megasas_cmd_fusion allocation.
unreferenced object 0xffff88045dbd2000 (size 8192):
comm "systemd-udevd", pid 323, jiffies
4294671759 (age 49.008s)
backtrace:
[<
ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0
[<
ffffffff812186a8>] __kmalloc+0xe8/0x220
[<
ffffffffc0060594>] megasas_alloc_cmdlist_fusion+0x34/0xe0 [megaraid_sas]
(gdb) list *megasas_alloc_cmdlist_fusion+0x34
0xd5c4 is in megasas_alloc_cmdlist_fusion
(drivers/scsi/megaraid/megaraid_sas_fusion.c:443).
[<
ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas]
[<
ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas]
[<
ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas]
[<
ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas]
[<
ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas]
[<
ffffffff813d2ca5>] local_pci_probe+0x45/0xa0
[<
ffffffff813d4222>] pci_device_probe+0x192/0x1b0
[<
ffffffff814e3658>] driver_probe_device+0x2a8/0x460
[<
ffffffff814e38ed>] __driver_attach+0xdd/0xe0
[<
ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0
[<
ffffffff814e2dde>] driver_attach+0x1e/0x20
[<
ffffffff814e2775>] bus_add_driver+0x45/0x270
[<
ffffffff814e4400>] driver_register+0x60/0xe0
unreferenced object 0xffff880454ce3600 (size 192):
backtrace:
[<
ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0
[<
ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0
[<
ffffffffc00605d7>] megasas_alloc_cmdlist_fusion+0x77/0xe0 [megaraid_sas]
(gdb) list *megasas_alloc_cmdlist_fusion+0x77
0xd607 is in megasas_alloc_cmdlist_fusion
(drivers/scsi/megaraid/megaraid_sas_fusion.c:450).
[<
ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas]
[<
ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas]
[<
ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas]
[<
ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas]
[<
ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas]
[<
ffffffff813d2ca5>] local_pci_probe+0x45/0xa0
[<
ffffffff813d4222>] pci_device_probe+0x192/0x1b0
[<
ffffffff814e3658>] driver_probe_device+0x2a8/0x460
[<
ffffffff814e38ed>] __driver_attach+0xdd/0xe0
[<
ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0
[<
ffffffff814e2dde>] driver_attach+0x1e/0x20
[<
ffffffff814e2775>] bus_add_driver+0x45/0x270
[<
ffffffff814e4400>] driver_register+0x60/0xe0
Signed-off-by: Shu Wang <shuwang@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nilesh Javali [Wed, 19 Jul 2017 09:07:55 +0000 (02:07 -0700)]
scsi: qedi: Add ISCSI_BOOT_SYSFS to Kconfig
qedi uses iscsi_boot_sysfs to export the targets used for boot to
sysfs. Select the config option to make sure the module is built.
This addresses the compile time issue,
drivers/scsi/qedi/qedi_main.o: In function `qedi_remove':
qedi_main.c:(.text+0x3bbd): undefined reference to `iscsi_boot_destroy_kset'
drivers/scsi/qedi/qedi_main.o: In function `__qedi_probe.constprop.0':
qedi_main.c:(.text+0x577a): undefined reference to `iscsi_boot_create_target'
qedi_main.c:(.text+0x5807): undefined reference to `iscsi_boot_create_target'
qedi_main.c:(.text+0x587f): undefined reference to `iscsi_boot_create_initiator'
qedi_main.c:(.text+0x58f3): undefined reference to `iscsi_boot_create_ethernet'
qedi_main.c:(.text+0x5927): undefined reference to `iscsi_boot_destroy_kset'
qedi_main.c:(.text+0x5d7b): undefined reference to `iscsi_boot_create_host_kset'
[mkp: fixed whitespace]
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Fixes:
c57ec8fb7c02 ("scsi: qedi: Add support for Boot from SAN over iSCSI offload")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Johannes Thumshirn [Mon, 17 Jul 2017 13:11:42 +0000 (15:11 +0200)]
scsi: sg: fix static checker warning in sg_is_valid_dxfer
dxfer_len is an unsigned int and we always assign a value > 0 to it, so
it doesn't make any sense to check if it is < 0. We can't really check
dxferp as well as we have both NULL and not NULL cases in the possible
call paths.
So just return true for SG_DXFER_FROM_DEV transfer in
sg_is_valid_dxfer().
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Yadan Fan [Fri, 23 Jun 2017 09:40:06 +0000 (17:40 +0800)]
scsi: smartpqi: limit transfer length to 1MB
The smartpqi firmware will bypass the cache for any request larger than
1MB, so we should cap the request size to avoid any performance
degradation in kernels later than v4.3
This degradation is caused from
d2be537c3ba3568acd79cd178327b842e60d035e,
which changed max_sectors_kb to 1280k, but the hardware is able to
work fine with it, so the true fix should be from smartpqi driver.
Signed-off-by: Yadan Fan <ydfan@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Yadan Fan [Fri, 23 Jun 2017 09:40:05 +0000 (17:40 +0800)]
scsi: hpsa: limit transfer length to 1MB
The hpsa firmware will bypass the cache for any request larger than 1MB,
so we should cap the request size to avoid any performance degradation
in kernels later than v4.3
This degradation is caused from
d2be537c3ba3568acd79cd178327b842e60d035e,
which changed max_sectors_kb to 1280k, but the hardware is able to work
fine with it, so the true fix should be from hpsa driver.
Signed-off-by: Yadan Fan <ydfan@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Wed, 12 Jul 2017 07:30:22 +0000 (10:30 +0300)]
scsi: libfc: pass an error pointer to fc_disc_error()
This patch is basically to silence a static checker warning.
drivers/scsi/libfc/fc_disc.c:326 fc_disc_error()
warn: passing a valid pointer to 'PTR_ERR'
It doesn't affect runtime because it treats -ENOMEM and a valid pointer
the same. But the documentation says we should be passing an error
pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Tue, 11 Jul 2017 12:11:44 +0000 (13:11 +0100)]
scsi: hisi_sas: make several const arrays static
Don't populate various tables on the stack but make them static const.
Makes the object code smaller by over 280 bytes:
Before:
text data bss dec hex filename
39887 5080 64 45031 afe7 hisi_sas_v2_hw.o
After:
text data bss dec hex filename
39318 5368 64 44750 aece hisi_sas_v2_hw.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Mon, 10 Jul 2017 08:47:40 +0000 (11:47 +0300)]
scsi: qla2xxx: Off by one in qlt_ctio_to_cmd()
There are "req->num_outstanding_cmds" elements in the
req->outstanding_cmds[] array so the > here should be >=.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Johannes Thumshirn [Fri, 7 Jul 2017 08:56:38 +0000 (10:56 +0200)]
scsi: sg: fix SG_DXFER_FROM_DEV transfers
SG_DXFER_FROM_DEV transfers do not necessarily have a dxferp as we set
it to NULL for the old sg_io read/write interface, but must have a
length bigger than 0. This fixes a regression introduced by commit
28676d869bbb ("scsi: sg: check for valid direction before starting the
request")
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes:
28676d869bbb ("scsi: sg: check for valid direction before starting the request")
Reported-by: Chris Clayton <chris2553@googlemail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Paolo Bonzini [Wed, 5 Jul 2017 08:30:56 +0000 (10:30 +0200)]
scsi: virtio_scsi: always read VPD pages for multiqueue too
Multi-queue virtio-scsi uses a different scsi_host_template struct. Add
the .device_alloc field there, too.
Fixes:
25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0
Cc: stable@vger.kernel.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Mon, 3 Jul 2017 19:21:39 +0000 (20:21 +0100)]
scsi: qedf: fix spelling mistake: "offlading" -> "offloading"
Trivial fix to spelling mistake in QEDF_INFO message and remove
duplicated "since" (thanks to Tyrel Datwyler for spotting the latter
issue).
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Mon, 3 Jul 2017 10:24:02 +0000 (11:24 +0100)]
scsi: qedi: fix another spelling mistake: "alloction" -> "allocation"
Trivial fix to spelling mistake in QEDF_ERR message. I should have also
included this in a previous fix, but I only just spotted this one.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Mon, 3 Jul 2017 10:17:27 +0000 (11:17 +0100)]
scsi: isci: fix typo in function names
There are a couple of typos in function names and spelling of request
where the letters u and e are swapped:
scu_ssp_reqeust_construct_task_context
scu_sata_reqeust_construct_task_context
Fix the spelling of request.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Fri, 30 Jun 2017 08:01:06 +0000 (11:01 +0300)]
scsi: cxlflash: return -EFAULT if copy_from_user() fails
The copy_from/to_user() functions return the number of bytes remaining
to be copied but we had intended to return -EFAULT here.
Fixes:
bc88ac47d5cb ("scsi: cxlflash: Support AFU debug")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nilesh Javali [Tue, 27 Jun 2017 09:26:56 +0000 (02:26 -0700)]
scsi: qedi: Add support for Boot from SAN over iSCSI offload
This patch adds support for Boot from SAN over iSCSI offload. The iSCSI
boot information in the NVRAM is populated under
/sys/firmware/iscsi_bootX/ using qed NVM-image reading API and further
exported to open-iscsi to perform iSCSI login enabling boot over offload
iSCSI interface in a Boot from SAN environment.
Signed-off-by: Arun Easi <arun.easi@cavium.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@cavium.com>
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com>
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds [Tue, 11 Jul 2017 22:36:52 +0000 (15:36 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"This is a followup for block changes, that didn't make the initial
pull request. It's a bit of a mixed bag, this contains:
- A followup pull request from Sagi for NVMe. Outside of fixups for
NVMe, it also includes a series for ensuring that we properly
quiesce hardware queues when browsing live tags.
- Set of integrity fixes from Dmitry (mostly), fixing various issues
for folks using DIF/DIX.
- Fix for a bug introduced in cciss, with the req init changes. From
Christoph.
- Fix for a bug in BFQ, from Paolo.
- Two followup fixes for lightnvm/pblk from Javier.
- Depth fix from Ming for blk-mq-sched.
- Also from Ming, performance fix for mtip32xx that was introduced
with the dynamic initialization of commands"
* 'for-linus' of git://git.kernel.dk/linux-block: (44 commits)
block: call bio_uninit in bio_endio
nvmet: avoid unneeded assignment of submit_bio return value
nvme-pci: add module parameter for io queue depth
nvme-pci: compile warnings in nvme_alloc_host_mem()
nvmet_fc: Accept variable pad lengths on Create Association LS
nvme_fc/nvmet_fc: revise Create Association descriptor length
lightnvm: pblk: remove unnecessary checks
lightnvm: pblk: control I/O flow also on tear down
cciss: initialize struct scsi_req
null_blk: fix error flow for shared tags during module_init
block: Fix __blkdev_issue_zeroout loop
nvme-rdma: unconditionally recycle the request mr
nvme: split nvme_uninit_ctrl into stop and uninit
virtio_blk: quiesce/unquiesce live IO when entering PM states
mtip32xx: quiesce request queues to make sure no submissions are inflight
nbd: quiesce request queues to make sure no submissions are inflight
nvme: kick requeue list when requeueing a request instead of when starting the queues
nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues
nvme-loop: quiesce/unquiesce admin_q instead of start/stop its hw queues
nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues
...
Linus Torvalds [Tue, 11 Jul 2017 21:04:48 +0000 (14:04 -0700)]
Merge tag 'smb3-security-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes and sane default from Steve French:
"Upgrade default dialect to more secure SMB3 from older cifs dialect"
* tag 'smb3-security-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Clean up unused variables in smb2pdu.c
[SMB3] Improve security, move default dialect to SMB3 from old CIFS
[SMB3] Remove ifdef since SMB3 (and later) now STRONGLY preferred
CIFS: Reconnect expired SMB sessions
CIFS: Display SMB2 error codes in the hex format
cifs: Use smb 2 - 3 and cifsacl mount options setacl function
cifs: prototype declaration and definition to set acl for smb 2 - 3 and cifsacl mount options
Linus Torvalds [Tue, 11 Jul 2017 19:12:28 +0000 (12:12 -0700)]
Merge tag 'ceph-for-4.13-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The main item here is support for v12.y.z ("Luminous") clusters:
RESEND_ON_SPLIT, RADOS_BACKOFF, OSDMAP_PG_UPMAP and CRUSH_CHOOSE_ARGS
feature bits, and various other changes in the RADOS client protocol.
On top of that we have a new fsc mount option to allow supplying
fscache uniquifier (similar to NFS) and the usual pile of filesystem
fixes from Zheng"
* tag 'ceph-for-4.13-rc1' of git://github.com/ceph/ceph-client: (44 commits)
libceph: advertise support for NEW_OSDOP_ENCODING and SERVER_LUMINOUS
libceph: osd_state is 32 bits wide in luminous
crush: remove an obsolete comment
crush: crush_init_workspace starts with struct crush_work
libceph, crush: per-pool crush_choose_arg_map for crush_do_rule()
crush: implement weight and id overrides for straw2
libceph: apply_upmap()
libceph: compute actual pgid in ceph_pg_to_up_acting_osds()
libceph: pg_upmap[_items] infrastructure
libceph: ceph_decode_skip_* helpers
libceph: kill __{insert,lookup,remove}_pg_mapping()
libceph: introduce and switch to decode_pg_mapping()
libceph: don't pass pgid by value
libceph: respect RADOS_BACKOFF backoffs
libceph: make DEFINE_RB_* helpers more general
libceph: avoid unnecessary pi lookups in calc_target()
libceph: use target pi for calc_target() calculations
libceph: always populate t->target_{oid,oloc} in calc_target()
libceph: make sure need_resend targets reflect latest map
libceph: delete from need_resend_linger before check_linger_pool_dne()
...
Linus Torvalds [Tue, 11 Jul 2017 16:59:37 +0000 (09:59 -0700)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Renesas RZ/A WDT Watchdog driver
- STM32 Independent WatchDoG (IWDG) support
- UniPhier watchdog support
- Add F71868 support
- Add support for NCT6793D and NCT6795D
- dw_wdt: add reset lines support
- core: add option to avoid early handling of watchdog
- core: introduce watchdog_worker_should_ping helper
- Cleanups and improvements for sama5d4, intel-mid_wdt, s3c2410_wdt,
orion_wdt, gpio_wdt, it87_wdt, meson_wdt, davinci_wdt, bcm47xx_wdt,
zx2967_wdt, cadence_wdt
* git://www.linux-watchdog.org/linux-watchdog: (32 commits)
watchdog: introduce watchdog_worker_should_ping helper
watchdog: uniphier: add UniPhier watchdog driver
dt-bindings: watchdog: add description for UniPhier WDT controller
watchdog: cadence_wdt: make of_device_ids const.
watchdog: zx2967: constify zx2967_wdt_ops.
watchdog: bcm47xx_wdt: constify bcm47xx_wdt_hard_ops and bcm47xx_wdt_soft_ops
watchdog: davinci: Add missing clk_disable_unprepare().
watchdog: davinci: Handle return value of clk_prepare_enable
watchdog: meson: Handle return value of clk_prepare_enable
watchdog: it87: Add support for various Super-IO chips
watchdog: it87: Use infrastructure to stop watchdog on reboot
watchdog: it87: Drop support for resetting watchdog though CIR and Game port
watchdog: it87: Convert to use watchdog core infrastructure
watchdog: it87: Drop FSF mailing address
watchdog: dw_wdt: get reset lines from dt
watchdog: bindings: dw_wdt: add reset lines
watchdog: w83627hf: Add support for NCT6793D and NCT6795D
watchdog: core: add option to avoid early handling of watchdog
watchdog: f71808e_wdt: Add F71868 support
watchdog: Add STM32 IWDG driver
...
Linus Torvalds [Tue, 11 Jul 2017 16:55:47 +0000 (09:55 -0700)]
Merge tag 'chrome-platform-for-linus-4.13' of git://git./linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung:
"Changes in this pull request are around catching up cros_ec with the
internal chromeos-kernel versions of cros_ec, cros_ec_lpc, and
cros_ec_lightbar.
Also, switching maintainership from olof to bleung"
* tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
platform/chrome : Add myself as Maintainer
platform/chrome: cros_ec_lightbar - hide unused PM functions
cros_ec: Don't signal wake event for non-wake host events
cros_ec: Fix deadlock when EC is not responsive at probe
cros_ec: Don't return error when checking command version
platform/chrome: cros_ec_lightbar - Avoid I2C xfer to EC during suspend
platform/chrome: cros_ec_lightbar - Add userspace lightbar control bit to EC
platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence
platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs
platform/chrome: cros_ec_lpc: Add MKBP events support over ACPI
platform/chrome: cros_ec_lpc: Add power management ops
platform/chrome: cros_ec_lpc: Add support for GOOG004 ACPI device
platform/chrome: cros_ec_lpc: Add support for mec1322 EC
platform/chrome: cros_ec_lpc: Add R/W helpers to LPC protocol variants
mfd: cros_ec: Add support for dumping panic information
cros_ec_debugfs: Pass proper struct sizes to cros_ec_cmd_xfer()
mfd: cros_ec: add debugfs, console log file
mfd: cros_ec: Add EC console read structures definitions
mfd: cros_ec: Add helper for event notifier.
Linus Torvalds [Tue, 11 Jul 2017 16:52:56 +0000 (09:52 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu
Pull x86nommu update from Greg Ungerer:
"Only a single change, to remove old Kconfig options from defconfigs"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: defconfig: Cleanup from old Kconfig options
Linus Torvalds [Mon, 10 Jul 2017 23:58:42 +0000 (16:58 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
- most of the rest of MM
- KASAN updates
- lib/ updates
- checkpatch updates
- some binfmt_elf changes
- various misc bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (115 commits)
kernel/exit.c: avoid undefined behaviour when calling wait4()
kernel/signal.c: avoid undefined behaviour in kill_something_info
binfmt_elf: safely increment argv pointers
s390: reduce ELF_ET_DYN_BASE
powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
arm: move ELF_ET_DYN_BASE to 4MB
binfmt_elf: use ELF_ET_DYN_BASE only for PIE
fs, epoll: short circuit fetching events if thread has been killed
checkpatch: improve multi-line alignment test
checkpatch: improve macro reuse test
checkpatch: change format of --color argument to --color[=WHEN]
checkpatch: silence perl 5.26.0 unescaped left brace warnings
checkpatch: improve tests for multiple line function definitions
checkpatch: remove false warning for commit reference
checkpatch: fix stepping through statements with $stat and ctx_statement_block
checkpatch: [HLP]LIST_HEAD is also declaration
checkpatch: warn when a MAINTAINERS entry isn't [A-Z]:\t
checkpatch: improve the unnecessary OOM message test
lib/bsearch.c: micro-optimize pivot position calculation
...
zhongjiang [Mon, 10 Jul 2017 22:53:01 +0000 (15:53 -0700)]
kernel/exit.c: avoid undefined behaviour when calling wait4()
wait4(-
2147483648, 0x20, 0, 0xdd0000) triggers:
UBSAN: Undefined behaviour in kernel/exit.c:1651:9
The related calltrace is as follows:
negation of -
2147483648 cannot be represented in type 'int':
CPU: 9 PID: 16482 Comm: zj Tainted: G B ---- ------- 3.10.0-327.53.58.71.x86_64+ #66
Hardware name: Huawei Technologies Co., Ltd. Tecal RH2285 /BC11BTSA , BIOS CTSAV036 04/27/2011
Call Trace:
dump_stack+0x19/0x1b
ubsan_epilogue+0xd/0x50
__ubsan_handle_negate_overflow+0x109/0x14e
SyS_wait4+0x1cb/0x1e0
system_call_fastpath+0x16/0x1b
Exclude the overflow to avoid the UBSAN warning.
Link: http://lkml.kernel.org/r/1497264618-20212-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhongjiang <zhongjiang@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zhongjiang [Mon, 10 Jul 2017 22:52:57 +0000 (15:52 -0700)]
kernel/signal.c: avoid undefined behaviour in kill_something_info
When running kill(
72057458746458112, 0) in userspace I hit the following
issue.
UBSAN: Undefined behaviour in kernel/signal.c:1462:11
negation of -
2147483648 cannot be represented in type 'int':
CPU: 226 PID: 9849 Comm: test Tainted: G B ---- ------- 3.10.0-327.53.58.70.x86_64_ubsan+ #116
Hardware name: Huawei Technologies Co., Ltd. RH8100 V3/BC61PBIA, BIOS BLHSV028 11/11/2014
Call Trace:
dump_stack+0x19/0x1b
ubsan_epilogue+0xd/0x50
__ubsan_handle_negate_overflow+0x109/0x14e
SYSC_kill+0x43e/0x4d0
SyS_kill+0xe/0x10
system_call_fastpath+0x16/0x1b
Add code to avoid the UBSAN detection.
[akpm@linux-foundation.org: tweak comment]
Link: http://lkml.kernel.org/r/1496670008-59084-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhongjiang <zhongjiang@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:54 +0000 (15:52 -0700)]
binfmt_elf: safely increment argv pointers
When building the argv/envp pointers, the envp is needlessly
pre-incremented instead of just continuing after the argv pointers are
finished. In some (likely impossible) race where the strings could be
changed from userspace between copy_strings() and here, it might be
possible to confuse the envp position. Instead, just use sp like
everything else.
Link: http://lkml.kernel.org/r/20170622173838.GA43308@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:51 +0000 (15:52 -0700)]
s390: reduce ELF_ET_DYN_BASE
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
address space for 32-bit pointers. On 32-bit use 4MB, which is the
traditional x86 minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided). For s390 the
position could be 0x10000, but that is needlessly close to the NULL
address.
Link: http://lkml.kernel.org/r/1498154792-49952-5-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:47 +0000 (15:52 -0700)]
powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
address space for 32-bit pointers. On 32-bit use 4MB, which is the
traditional x86 minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided).
Link: http://lkml.kernel.org/r/1498154792-49952-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:44 +0000 (15:52 -0700)]
arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.
For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit
address space for 32-bit pointers. On 32-bit use 4MB, to match ARM.
This could be 0x8000, the standard ET_EXEC load address, but that is
needlessly close to the NULL address, and anyone running arm compat PIE
will have an MMU, so the tight mapping is not needed.
Link: http://lkml.kernel.org/r/1498251600-132458-4-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:40 +0000 (15:52 -0700)]
arm: move ELF_ET_DYN_BASE to 4MB
Now that explicitly executed loaders are loaded in the mmap region, we
have more freedom to decide where we position PIE binaries in the
address space to avoid possible collisions with mmap or stack regions.
4MB is chosen here mainly to have parity with x86, where this is the
traditional minimum load location, likely to avoid historically
requiring a 4MB page table entry when only a portion of the first 4MB
would be used (since the NULL address is avoided).
For ARM the position could be 0x8000, the standard ET_EXEC load address,
but that is needlessly close to the NULL address, and anyone running PIE
on 32-bit ARM will have an MMU, so the tight mapping is not needed.
Link: http://lkml.kernel.org/r/1498154792-49952-2-git-send-email-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Mon, 10 Jul 2017 22:52:37 +0000 (15:52 -0700)]
binfmt_elf: use ELF_ET_DYN_BASE only for PIE
The ELF_ET_DYN_BASE position was originally intended to keep loaders
away from ET_EXEC binaries. (For example, running "/lib/ld-linux.so.2
/bin/cat" might cause the subsequent load of /bin/cat into where the
loader had been loaded.)
With the advent of PIE (ET_DYN binaries with an INTERP Program Header),
ELF_ET_DYN_BASE continued to be used since the kernel was only looking
at ET_DYN. However, since ELF_ET_DYN_BASE is traditionally set at the
top 1/3rd of the TASK_SIZE, a substantial portion of the address space
is unused.
For 32-bit tasks when RLIMIT_STACK is set to RLIM_INFINITY, programs are
loaded above the mmap region. This means they can be made to collide
(CVE-2017-
1000370) or nearly collide (CVE-2017-
1000371) with
pathological stack regions.
Lowering ELF_ET_DYN_BASE solves both by moving programs below the mmap
region in all cases, and will now additionally avoid programs falling
back to the mmap region by enforcing MAP_FIXED for program loads (i.e.
if it would have collided with the stack, now it will fail to load
instead of falling back to the mmap region).
To allow for a lower ELF_ET_DYN_BASE, loaders (ET_DYN without INTERP)
are loaded into the mmap region, leaving space available for either an
ET_EXEC binary with a fixed location or PIE being loaded into mmap by
the loader. Only PIE programs are loaded offset from ELF_ET_DYN_BASE,
which means architectures can now safely lower their values without risk
of loaders colliding with their subsequently loaded programs.
For 64-bit, ELF_ET_DYN_BASE is best set to 4GB to allow runtimes to use
the entire 32-bit address space for 32-bit pointers.
Thanks to PaX Team, Daniel Micay, and Rik van Riel for inspiration and
suggestions on how to implement this solution.
Fixes:
d1fd836dcf00 ("mm: split ET_DYN ASLR from mmap ASLR")
Link: http://lkml.kernel.org/r/20170621173201.GA114489@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pratyush Anand <panand@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Mon, 10 Jul 2017 22:52:33 +0000 (15:52 -0700)]
fs, epoll: short circuit fetching events if thread has been killed
We've encountered zombies that are waiting for a thread to exit that are
looping in ep_poll() almost endlessly although there is a pending
SIGKILL as a result of a group exit.
This happens because we always find ep_events_available() and fetch more
events and never are able to check for signal_pending() that would break
from the loop and return -EINTR.
Special case fatal signals and break immediately to guarantee that we
loop to fetch more events and delay making a timely exit.
It would also be possible to simply move the check for signal_pending()
higher than checking for ep_events_available(), but there have been no
reports of delayed signal handling other than SIGKILL preventing zombies
from exiting that would be fixed by this.
It fixes an issue for us where we have witnessed zombies sticking around
for at least O(minutes), but considering the code has been like this
forever and nobody else has complained that I have found, I would simply
queue it up for 4.12.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705031722350.76784@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 10 Jul 2017 22:52:30 +0000 (15:52 -0700)]
checkpatch: improve multi-line alignment test
The current test fails to warn about improper alignment with code like
foo->bar = func(arg1,
arg2);
because foo->bar is not a single identifier.
Convert the $Ident to $Lval which allows for multiple dereferences.
Link: http://lkml.kernel.org/r/01c35b9b6a12a415e57746d45d589bfaad39952a.1498841563.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 10 Jul 2017 22:52:27 +0000 (15:52 -0700)]
checkpatch: improve macro reuse test
checkpatch reports a false positive when using token pasting argument
multiple times in a macro.
Fix it.
Miscellanea:
o Make the $tmp variable name used in the macro argument tests
a bit more descriptive
Link: http://lkml.kernel.org/r/cf434ae7602838388c7cb49d42bca93ab88527e7.1498483044.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
John Brooks [Mon, 10 Jul 2017 22:52:24 +0000 (15:52 -0700)]
checkpatch: change format of --color argument to --color[=WHEN]
The boolean --color argument did not offer the ability to force
colourized output even if stdout is not a terminal. Change the format
of the argument to the familiar --color[=WHEN] construct as seen in
common Linux utilities such as git, ls and dmesg, which allows the user
to specify whether to colourize output "always", "never", or "auto" when
the output is a terminal. The default is "auto".
The old command-line uses of --color and --no-color are unchanged.
Link: http://lkml.kernel.org/r/efe43bdbad400f39ba691ae663044462493b0773.1496799721.git.joe@perches.com
Signed-off-by: John Brooks <john@fastquake.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cyril Bur [Mon, 10 Jul 2017 22:52:21 +0000 (15:52 -0700)]
checkpatch: silence perl 5.26.0 unescaped left brace warnings
As of perl 5, version 26, subversion 0 (v5.26.0) some new warnings have
occurred when running checkpatch.
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){
<-- HERE \s*/ at scripts/checkpatch.pl line 3544.
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in m/^(.\s*){
<-- HERE \s*/ at scripts/checkpatch.pl line 3885.
Unescaped left brace in regex is deprecated here (and will be fatal in
Perl 5.30), passed through in regex; marked by <-- HERE in
m/^(\+.*(?:do|\))){ <-- HERE / at scripts/checkpatch.pl line 4374.
It seems perfectly reasonable to do as the warning suggests and simply
escape the left brace in these three locations.
Link: http://lkml.kernel.org/r/20170607060135.17384-1-cyrilbur@gmail.com
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Acked-by: Joe Perches <joe@perches.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 10 Jul 2017 22:52:19 +0000 (15:52 -0700)]
checkpatch: improve tests for multiple line function definitions
Add a block that identifies multiple line function definitions.
Save the function name into $context_function to improve the embedded
function name test.
Look for misplaced open brace on the function definition.
Emit an OPEN_BRACE error when the function definition is similar to
void foo(int arg1,
int arg2) {
Miscellanea:
o Remove the $realfile test in function declaration w/o named arguments test
o Comment the function declaration w/o named arguments test
Link: http://lkml.kernel.org/r/de620ed6ebab75fdfa323741ada2134a0f545892.1496835238.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heinrich Schuchardt [Mon, 10 Jul 2017 22:52:16 +0000 (15:52 -0700)]
checkpatch: remove false warning for commit reference
Checkpatch warns of an incorrect commit reference style for any
hexadecimal number of 12 digits and more.
Numbers of 12 digits are not necessarily commit ids.
For an example provoking the problem see
https://patchwork.kernel.org/patch/
9170897/
Checkpatch should only warn if the number refers to an existing commit.
Link: http://lkml.kernel.org/r/20170607184008.5869-1-xypron.glpk@gmx.de
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 10 Jul 2017 22:52:13 +0000 (15:52 -0700)]
checkpatch: fix stepping through statements with $stat and ctx_statement_block
Fix the off-by-one in the suppression of lines in a statement block.
This means that for multiple line statements like
foo(bar,
baz,
qux);
$stat has been inspected first correctly for the entire statement,
and subsequently incorrectly just for
qux);
This fix will help make tracking appropriate indentation a little easier.
Link: http://lkml.kernel.org/r/71b25979c90412133c717084036c9851cd2b7bcb.1496862585.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steffen Maier [Mon, 10 Jul 2017 22:52:10 +0000 (15:52 -0700)]
checkpatch: [HLP]LIST_HEAD is also declaration
Fixes the following false warning among others for LLIST_HEAD and
PLIST_HEAD:
WARNING: Missing a blank line after declarations
#71: FILE: drivers/s390/scsi/zfcp_fsf.c:422:
+ struct hlist_node *tmp;
+ HLIST_HEAD(remove_queue);
Link: http://lkml.kernel.org/r/20170614133512.89425-1-maier@linux.vnet.ibm.com
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 10 Jul 2017 22:52:07 +0000 (15:52 -0700)]
checkpatch: warn when a MAINTAINERS entry isn't [A-Z]:\t
For consistency, MAINTAINERS entries should be an upper case letter,
then a colon, then a tab, then the value.
Warn when an entry doesn't have this form. --fix it too.
Link: http://lkml.kernel.org/r/9aaaf03ec10adf3888b5e98dd2176b7fe9b5fad8.1496343345.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Mon, 10 Jul 2017 22:52:04 +0000 (15:52 -0700)]
checkpatch: improve the unnecessary OOM message test
Use the context around a patch to avoid missing some candidates.
Link: http://lkml.kernel.org/r/865e874fbae5decc331a849bd8d71c325db6bc80.1496343345.git.joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sergey Senozhatsky [Mon, 10 Jul 2017 22:52:01 +0000 (15:52 -0700)]
lib/bsearch.c: micro-optimize pivot position calculation
There is a slightly faster way (in terms of the number of instructions
being used) to calculate the position of a middle element, preserving
integer overflow safeness.
./scripts/bloat-o-meter lib/bsearch.o.old lib/bsearch.o.new
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-24 (-24)
function old new delta
bsearch 122 98 -24
TEST
INT array of size 100001, elements [0..100000]. gcc 7.1, Os, x86_64.
a) bsearch() of existing key "100001 - 2":
BASE
====
$ perf stat ./a.out
Performance counter stats for './a.out':
619.445196 task-clock:u (msec) # 0.999 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
133 page-faults:u # 0.215 K/sec
1,949,517,279 cycles:u # 3.147 GHz (83.06%)
181,017,938 stalled-cycles-frontend:u # 9.29% frontend cycles idle (83.05%)
82,959,265 stalled-cycles-backend:u # 4.26% backend cycles idle (67.02%)
4,355,706,383 instructions:u # 2.23 insn per cycle
# 0.04 stalled cycles per insn (83.54%)
1,051,539,242 branches:u # 1697.550 M/sec (83.54%)
15,263,381 branch-misses:u # 1.45% of all branches (83.43%)
0.
620082548 seconds time elapsed
PATCHED
=======
$ perf stat ./a.out
Performance counter stats for './a.out':
475.097316 task-clock:u (msec) # 0.999 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
135 page-faults:u # 0.284 K/sec
1,487,467,717 cycles:u # 3.131 GHz (82.95%)
186,537,162 stalled-cycles-frontend:u # 12.54% frontend cycles idle (82.93%)
28,797,869 stalled-cycles-backend:u # 1.94% backend cycles idle (67.10%)
3,807,564,203 instructions:u # 2.56 insn per cycle
# 0.05 stalled cycles per insn (83.57%)
1,049,344,291 branches:u # 2208.693 M/sec (83.60%)
5,485 branch-misses:u # 0.00% of all branches (83.58%)
0.
475760235 seconds time elapsed
b) bsearch() of un-existing key "100001 + 2":
BASE
====
$ perf stat ./a.out
Performance counter stats for './a.out':
499.244480 task-clock:u (msec) # 0.999 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
132 page-faults:u # 0.264 K/sec
1,571,194,855 cycles:u # 3.147 GHz (83.18%)
13,450,980 stalled-cycles-frontend:u # 0.86% frontend cycles idle (83.18%)
21,256,072 stalled-cycles-backend:u # 1.35% backend cycles idle (66.78%)
4,171,197,909 instructions:u # 2.65 insn per cycle
# 0.01 stalled cycles per insn (83.68%)
1,009,175,281 branches:u # 2021.405 M/sec (83.79%)
3,122 branch-misses:u # 0.00% of all branches (83.37%)
0.
499871144 seconds time elapsed
PATCHED
=======
$ perf stat ./a.out
Performance counter stats for './a.out':
399.023499 task-clock:u (msec) # 0.998 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
134 page-faults:u # 0.336 K/sec
1,245,793,991 cycles:u # 3.122 GHz (83.39%)
11,529,273 stalled-cycles-frontend:u # 0.93% frontend cycles idle (83.46%)
12,116,311 stalled-cycles-backend:u # 0.97% backend cycles idle (66.92%)
3,679,710,005 instructions:u # 2.95 insn per cycle
# 0.00 stalled cycles per insn (83.47%)
1,009,792,625 branches:u # 2530.660 M/sec (83.46%)
2,590 branch-misses:u # 0.00% of all branches (83.12%)
0.
399733539 seconds time elapsed
Link: http://lkml.kernel.org/r/20170607150457.5905-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Meyer [Mon, 10 Jul 2017 22:51:58 +0000 (15:51 -0700)]
lib/extable.c: use bsearch() library function in search_extable()
[thomas@m3y3r.de: v3: fix arch specific implementations]
Link: http://lkml.kernel.org/r/1497890858.12931.7.camel@m3y3r.de
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Mon, 10 Jul 2017 22:51:55 +0000 (15:51 -0700)]
lib/rhashtable.c: use kvzalloc() in bucket_table_alloc() when possible
bucket_table_alloc() can be currently called with GFP_KERNEL or
GFP_ATOMIC. For the former we basically have an open coded kvzalloc()
while the later only uses kzalloc(). Let's simplify the code a bit by
the dropping the open coded path and replace it with kvzalloc().
Link: http://lkml.kernel.org/r/20170531155145.17111-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Mon, 10 Jul 2017 22:51:52 +0000 (15:51 -0700)]
lib/interval_tree_test.c: allow full tree search
... such that a user can specify visiting all the nodes in the tree
(intersects with the world). This is a nice opposite from the very
basic default query which is a single point.
Link: http://lkml.kernel.org/r/20170518174936.20265-5-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Mon, 10 Jul 2017 22:51:49 +0000 (15:51 -0700)]
lib/interval_tree_test.c: allow users to limit scope of endpoint
Add a 'max_endpoint' parameter such that users may easily limit the size
of the intervals that are randomly generated.
Link: http://lkml.kernel.org/r/20170518174936.20265-4-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Mon, 10 Jul 2017 22:51:46 +0000 (15:51 -0700)]
lib/interval_tree_test.c: make test options module parameters
Allows for more flexible debugging.
Link: http://lkml.kernel.org/r/20170518174936.20265-3-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Mon, 10 Jul 2017 22:51:43 +0000 (15:51 -0700)]
lib/interval_tree_test.c: allow the module to be compiled-in
Patch series "lib/interval_tree_test: some debugging improvements".
Here are some patches that update the interval_tree_test module allowing
users to pass finer grained options to run the actual test.
This patch (of 4):
It is a tristate after all, and also serves well for quick debugging.
Link: http://lkml.kernel.org/r/20170518174936.20265-2-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Mon, 10 Jul 2017 22:51:41 +0000 (15:51 -0700)]
lib/kstrtox.c: use "unsigned int" more
gcc does generates stupid code sign extending data back and forth. Help
by using "unsigned int".
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-61 (-61)
function old new delta
_parse_integer 128 123 -5
It _still_ does generate useless MOVSX but I don't know how to delete it:
0000000000000070 <_parse_integer>:
...
a0: 89 c2 mov edx,eax
a2: 83 e8 30 sub eax,0x30
a5: 83 f8 09 cmp eax,0x9
a8: 76 11 jbe bb <_parse_integer+0x4b>
aa: 83 ca 20 or edx,0x20
ad: 0f be c2 ===> movsx eax,dl <===
useless
b0: 8d 50 9f lea edx,[rax-0x61]
b3: 83 fa 05 cmp edx,0x5
Patch also helps on embedded archs which generally only like "int". On
arm "and 0xff" is generated which is waste because all values used in
comparisons are positive.
Link: http://lkml.kernel.org/r/20170514194720.GB32563@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Mon, 10 Jul 2017 22:51:38 +0000 (15:51 -0700)]
lib/kstrtox.c: delete end-of-string test
Standard "while (*s)" test is unnecessary because NUL won't pass
valid-digit test anyway. Save one branch per parsed character.
Link: http://lkml.kernel.org/r/20170514193756.GA32563@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Mon, 10 Jul 2017 22:51:35 +0000 (15:51 -0700)]
bitmap: use memcmp optimisation in more situations
Commit
7dd968163f7c ("bitmap: bitmap_equal memcmp optimization") was
rather more restrictive than necessary; we can use memcmp() to implement
bitmap_equal() as long as the number of bits can be proved to be a
multiple of 8. And architectures other than s390 may be able to make
good use of this optimisation.
[arnd@arndb.de: fix build: add a memcmp() declaration]
Link: http://lkml.kernel.org/r/20170630153908.3439707-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20170628153221.11322-5-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Mon, 10 Jul 2017 22:51:32 +0000 (15:51 -0700)]
include/linux/bitmap.h: turn bitmap_set and bitmap_clear into memset when possible
Several callers have constant 'start' and an 'nbits' that is a multiple
of 8, so we can turn them into calls to memset. We don't need the
entirety of 'start' and 'nbits' to be constant, we just need to know
whether they're divisible by 8.
Link: http://lkml.kernel.org/r/20170628153221.11322-4-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Mon, 10 Jul 2017 22:51:29 +0000 (15:51 -0700)]
bitmap: optimise bitmap_set and bitmap_clear of a single bit
We have eight users calling bitmap_clear for a single bit and seventeen
calling bitmap_set for a single bit. Rather than fix all of them to
call __clear_bit or __set_bit, turn bitmap_clear and bitmap_set into
inline functions and make this special case efficient.
Link: http://lkml.kernel.org/r/20170628153221.11322-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Mon, 10 Jul 2017 22:51:26 +0000 (15:51 -0700)]
lib/test_bitmap.c: add optimisation tests
Patch series "Bitmap optimisations", v2.
These three bitmap patches use more efficient specialisations when the
compiler can figure out that it's safe to do so. Thanks to Rasmus's
eagle eyes, a nasty bug in v1 was avoided, and I've added a test case
which would have caught it.
This patch (of 4):
This version of the test is actually a no-op; the next patch will enable
it.
Link: http://lkml.kernel.org/r/20170628153221.11322-2-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Luis R. Rodriguez [Mon, 10 Jul 2017 22:51:23 +0000 (15:51 -0700)]
MAINTAINERS: give proc sysctl some maintainer love
We poke at proc sysctl enough that really we should declare it
maintained. We'll just be Cc'd and sending updates / ACK'ing changes
through akpm's tree.
Link: http://lkml.kernel.org/r/20170524231305.8649-1-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Mon, 10 Jul 2017 22:51:20 +0000 (15:51 -0700)]
kernel/kallsyms.c: replace all_var with IS_ENABLED(CONFIG_KALLSYMS_ALL)
'all_var' looks like a variable, but is actually a macro. Use
IS_ENABLED(CONFIG_KALLSYMS_ALL) for clarification.
Link: http://lkml.kernel.org/r/1497577591-3434-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rasmus Villemoes [Mon, 10 Jul 2017 22:51:17 +0000 (15:51 -0700)]
kernel/groups.c: use sort library function
setgroups is not exactly a hot path, so we might as well use the library
function instead of open-coding the sorting. Saves ~150 bytes.
Link: http://lkml.kernel.org/r/1497301378-22739-1-git-send-email-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arvind Yadav [Mon, 10 Jul 2017 22:51:14 +0000 (15:51 -0700)]
kernel/ksysfs.c: constify attribute_group structures.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with
const attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
1120 544 16 1680 690 kernel/ksysfs.o
File size After adding 'const':
text data bss dec hex filename
1160 480 16 1656 678 kernel/ksysfs.o
Link: http://lkml.kernel.org/r/aa224b3cc923fdbb3edd0c41b2c639c85408c9e8.1498737347.git.arvind.yadav.cs@gmail.com
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Dave Young <dyoung@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bart Van Assche [Mon, 10 Jul 2017 22:51:10 +0000 (15:51 -0700)]
ARM: fix rd_size declaration
The global variable 'rd_size' is declared as 'int' in source file
arch/arm/kernel/atags_parse.c and as 'unsigned long' in
drivers/block/brd.c. Fix this inconsistency.
Additionally, remove the declarations of rd_image_start, rd_prompt and
rd_doload from parse_tag_ramdisk() since these duplicate existing
declarations in <linux/initrd.h>.
Link: http://lkml.kernel.org/r/20170627065024.12347-1-bart.vanassche@wdc.com
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Zhaohongjiang <zhaohongjiang@huawei.com>
Cc: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Abbott [Mon, 10 Jul 2017 22:51:07 +0000 (15:51 -0700)]
bug: split BUILD_BUG stuff out into <linux/build_bug.h>
Including <linux/bug.h> pulls in a lot of bloat from <asm/bug.h> and
<asm-generic/bug.h> that is not needed to call the BUILD_BUG() family of
macros. Split them out into their own header, <linux/build_bug.h>.
Also correct some checkpatch.pl errors for the BUILD_BUG_ON_ZERO() and
BUILD_BUG_ON_NULL() macros by adding parentheses around the bitfield
widths that begin with a minus sign.
Link: http://lkml.kernel.org/r/20170525120316.24473-6-abbotti@mev.co.uk
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Abbott [Mon, 10 Jul 2017 22:51:04 +0000 (15:51 -0700)]
linux/bug.h: correct "space required before that '-'"
Correct these checkpatch.pl errors:
|ERROR: space required before that '-' (ctx:OxO)
|#37: FILE: include/linux/bug.h:37:
|+#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
|ERROR: space required before that '-' (ctx:OxO)
|#38: FILE: include/linux/bug.h:38:
|+#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); }))
I decided to wrap the bitfield expressions that begin with minus signs
in parentheses rather than insert spaces before the minus signs.
Link: http://lkml.kernel.org/r/20170525120316.24473-5-abbotti@mev.co.uk
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Abbott [Mon, 10 Jul 2017 22:51:01 +0000 (15:51 -0700)]
linux/bug.h: correct "(foo*)" should be "(foo *)"
Correct this checkpatch.pl error:
|ERROR: "(foo*)" should be "(foo *)"
|#19: FILE: include/linux/bug.h:19:
|+#define BUILD_BUG_ON_NULL(e) ((void*)0)
Link: http://lkml.kernel.org/r/20170525120316.24473-4-abbotti@mev.co.uk
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Abbott [Mon, 10 Jul 2017 22:50:58 +0000 (15:50 -0700)]
linux/bug.h: correct formatting of block comment
Correct these checkpatch.pl warnings:
|WARNING: Block comments use * on subsequent lines
|#34: FILE: include/linux/bug.h:34:
|+/* Force a compilation error if condition is true, but also produce a
|+ result (of value 0 and type size_t), so the expression can be used
|WARNING: Block comments use a trailing */ on a separate line
|#36: FILE: include/linux/bug.h:36:
|+ aren't permitted). */
Link: http://lkml.kernel.org/r/20170525120316.24473-3-abbotti@mev.co.uk
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Abbott [Mon, 10 Jul 2017 22:50:55 +0000 (15:50 -0700)]
asm-generic/bug.h: declare struct pt_regs; before function prototype
This series of patches splits BUILD_BUG related macros out of
"include/linux/bug.h" into new file "include/linux/build_bug.h" (patch
5), and changes the pointer type checking in the `container_of()` macro
to deal with pointers of array type better (patch 6). Patches 1 to 4
are prerequisites.
Patches 2, 3, 4, and 5 have been inserted since the previous version of
this patch series. Patch 6 here corresponds to v3 and v4's patch 2.
Patch 1 was a prerequisite in v3 of this series to avoid a lot of
warnings when <linux/bug.h> was included by <linux/kernel.h>. That is
no longer relevant for v5 of the series, but I left it in because it was
acked by a Arnd Bergmann and Michal Nazarewicz.
Patches 2, 3, and 4 are some checkpatch clean-ups on
"include/linux/bug.h" before splitting out the BUILD_BUG stuff in patch
5.
Patch 5 splits the BUILD_BUG related macros out of "include/linux/bug.h"
into new file "include/linux/build_bug.h" because including
<linux/bug.h> in "include/linux/kernel.h" would result in build failures
due to circular dependencies.
Patch 6 changes the pointer type checking by `container_of()` to avoid
some incompatible pointer warnings when the dereferenced pointer has
array type.
1) asm-generic/bug.h: declare struct pt_regs; before function prototype
2) linux/bug.h: correct formatting of block comment
3) linux/bug.h: correct "(foo*)" should be "(foo *)"
4) linux/bug.h: correct "space required before that '-'"
5) bug: split BUILD_BUG stuff out into <linux/build_bug.h>
6) kernel.h: handle pointers to arrays better in container_of()
This patch (of 6):
The declaration of `__warn()` has `struct pt_regs *regs` as one of its
parameters. This can result in compiler warnings if `struct regs` is not
already declared. Add an empty declaration of `struct pt_regs` to avoid
the warnings.
Link: http://lkml.kernel.org/r/20170525120316.24473-2-abbotti@mev.co.uk
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiner Kallweit [Mon, 10 Jul 2017 22:50:52 +0000 (15:50 -0700)]
fs/proc/generic.c: switch to ida_simple_get/remove
The code can be much simplified by switching to ida_simple_get/remove.
Link: http://lkml.kernel.org/r/8d1cc9f7-5115-c9dc-028e-c0770b6bfe1f@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Deacon [Mon, 10 Jul 2017 22:50:49 +0000 (15:50 -0700)]
frv: cmpxchg: implement cmpxchg64()
FRV supports 64-bit cmpxchg, which is provided by the arch code as
__cmpxchg_64 and subsequently used to implement atomic64_cmpxchg.
This patch hooks up the generic cmpxchg64 API using the same function,
which also provides default definitions of the relaxed, acquire and
release variants. This fixes the build when COMPILE_TEST=y and
IOMMU_IO_PGTABLE_LPAE=y.
Link: http://lkml.kernel.org/r/1499084670-6996-1-git-send-email-will.deacon@arm.com
Signed-off-by: Will Deacon <will.deacon@arm.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tobias Klauser [Mon, 10 Jul 2017 22:50:46 +0000 (15:50 -0700)]
frv: use generic fb.h
The arch uses a verbatim copy of the asm-generic version and does not
add any own implementations to the header, so use asm-generic/fb.h
instead of duplicating code.
Link: http://lkml.kernel.org/r/20170517083307.1697-1-tklauser@distanz.ch
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tobias Klauser [Mon, 10 Jul 2017 22:50:43 +0000 (15:50 -0700)]
frv: remove wrapper header for asm/device.h
frv's asm/device.h is merely including asm-generic/device.h. Thus, the
arch specific header can be omitted and the generic header can be used
directly.
Link: http://lkml.kernel.org/r/20170517124915.26904-1-tklauser@distanz.ch
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Mon, 10 Jul 2017 22:50:40 +0000 (15:50 -0700)]
kasan: make get_wild_bug_type() static
The helper function get_wild_bug_type() does not need to be in global
scope, so make it static.
Cleans up sparse warning:
"symbol 'get_wild_bug_type' was not declared. Should it be static?"
Link: http://lkml.kernel.org/r/20170622090049.10658-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Mon, 10 Jul 2017 22:50:37 +0000 (15:50 -0700)]
mm/kasan/kasan.c: rename XXX_is_zero to XXX_is_nonzero
They return positive value, that is, true, if non-zero value is found.
Rename them to reduce confusion.
Link: http://lkml.kernel.org/r/20170516012350.GA16015@js1304-desktop
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Mon, 10 Jul 2017 22:50:34 +0000 (15:50 -0700)]
mm/kasan: add support for memory hotplug
KASAN doesn't happen work with memory hotplug because hotplugged memory
doesn't have any shadow memory. So any access to hotplugged memory
would cause a crash on shadow check.
Use memory hotplug notifier to allocate and map shadow memory when the
hotplugged memory is going online and free shadow after the memory
offlined.
Link: http://lkml.kernel.org/r/20170601162338.23540-4-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Mon, 10 Jul 2017 22:50:31 +0000 (15:50 -0700)]
arm64/kasan: don't allocate extra shadow memory
We used to read several bytes of the shadow memory in advance.
Therefore additional shadow memory mapped to prevent crash if
speculative load would happen near the end of the mapped shadow memory.
Now we don't have such speculative loads, so we no longer need to map
additional shadow memory.
Link: http://lkml.kernel.org/r/20170601162338.23540-3-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Mon, 10 Jul 2017 22:50:27 +0000 (15:50 -0700)]
x86/kasan: don't allocate extra shadow memory
We used to read several bytes of the shadow memory in advance.
Therefore additional shadow memory mapped to prevent crash if
speculative load would happen near the end of the mapped shadow memory.
Now we don't have such speculative loads, so we no longer need to map
additional shadow memory.
Link: http://lkml.kernel.org/r/20170601162338.23540-2-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Mon, 10 Jul 2017 22:50:24 +0000 (15:50 -0700)]
mm/kasan: get rid of speculative shadow checks
For some unaligned memory accesses we have to check additional byte of
the shadow memory. Currently we load that byte speculatively to have
only single load + branch on the optimistic fast path.
However, this approach has some downsides:
- It's unaligned access, so this prevents porting KASAN on
architectures which doesn't support unaligned accesses.
- We have to map additional shadow page to prevent crash if speculative
load happens near the end of the mapped memory. This would
significantly complicate upcoming memory hotplug support.
I wasn't able to notice any performance degradation with this patch. So
these speculative loads is just a pain with no gain, let's remove them.
Link: http://lkml.kernel.org/r/20170601162338.23540-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Mon, 10 Jul 2017 22:50:21 +0000 (15:50 -0700)]
mm/kasan/kasan_init.c: use kasan_zero_pud for p4d table
There is missing optimization in zero_p4d_populate() that can save some
memory when mapping zero shadow. Implement it like as others.
Link: http://lkml.kernel.org/r/1494829255-23946-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jerome Marchand [Mon, 10 Jul 2017 22:50:18 +0000 (15:50 -0700)]
mm/zsmalloc: simplify zs_max_alloc_size handling
Commit
40f9fb8cffc6 ("mm/zsmalloc: support allocating obj with size of
ZS_MAX_ALLOC_SIZE") fixes a size calculation error that prevented
zsmalloc to allocate an object of the maximal size (ZS_MAX_ALLOC_SIZE).
I think however the fix is unneededly complicated.
This patch replaces the dynamic calculation of zs_size_classes at init
time by a compile time calculation that uses the DIV_ROUND_UP() macro
already used in get_size_class_index().
[akpm@linux-foundation.org: use min_t]
Link: http://lkml.kernel.org/r/20170630114859.1979-1-jmarchan@redhat.com
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Mahendran Ganesh <opensource.ganesh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log