staging: comedi: keep the consistency

Changed "register 0x%x" to "register=0x%x" to keep the consistency
of this file.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: fix checkpatch error

Fixed an error found by checkpatch.pl.
ERROR: space required after that ',' (ctx:VxV)
./drivers/ni_mio_common.c:3764

Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_isadma.h: make self-reliant

The Comedi "comedi_isadma.h" header is included by the source for the
"comedi_isadma" helper module and other modules that use it.  It does
not compile cleanly when it is the first header file included.  It uses
the `dma_addr_t` type, so include <linux/types.h> to declare it.  (Also,
that indirectly takes care of the use of `NULL`.)  It uses `struct
comedi_device *` in various function prototypes, so add an incomplete
declaration of `struct comedi_device`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_8254.h: make self-reliant

The Comedi "comedi_8254.h" header file is included by various Comedi
drivers with timer/counters based on the 8254 chip.  The drivers do not
compile cleanly if this header file is included first.  It uses pointers
to the `struct comedi_device`, `struct comedi_subdevice`, and `struct
comedi_insn` structures in various function prototypes, so declare those
as incomplete types.  It use the `bool` type, so include
<linux/types.h>.  It also uses the `__iomem` tag, but that seems to be
taken care of indirectly by including <linux/types.h>.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_watchdog.h: don't include "../comedidev.h"

The Comedi "addi_watchdog.h" header doesn't use anything form
"comedidev.h" apart from `struct comedi_subdevice`, which it only uses
to construct a corresponding pointer type within the parameter list of a
function prototype.  Just declare the structure type incompletely and
don't bother including the header file.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_pci.c: reformat copyright comment

Reformat the copyright comment at the top of the file to use the
preferred block comment style.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common.c: fix up brace style

Use braces when the single statement following an `if` (or `else`)
spans more than one line (including any preceding comments).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common.c: reformat copyright comment

Reformat the copyright comment at the top of the file to use the
preferred block comment style.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.c: reformat copyright comment

Reformat the copyright comment at the top of the file to use the
preferred block comment style.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: make self-reliant

The Comedi "amplc_dio200.h" header file included by drivers for Amplicon
DIO200 series cards does not compile cleanly when it is the first header
included by the ".c" file.  It uses `struct comedi_device *` in the
parameter lists of some function prototypes, so just declare `struct
comedi_device` as an incomplete type.  It also uses `bool`, so include
<linux/types.h> to declare it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: reformat copyright comment

Reformat the copyright comment at the top of the file to use the
preferred block comment style.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_8255: new module split from 8255

The Comedi "8255" module is both a standalone Comedi device driver
module for simple devices with one or more 8255 "Programmable Peripheral
Interface" chips at known I/O base addresses (configured at run-time),
and a helper module to configure a 8255-based digital I/O subdevice for
other Comedi drivers.

Split the "8255 subdevice helper" functionality into a new module:
"comedi_8255", leaving the standalone 8255 Comedi driver in the "8255"
module.

The Comedi "detach" routine of the standalone "8255" driver needs to
retrieve the I/O base address passed to the "comedi_8255" module to set
up each subdevice in order to release the I/O port regions it requested
in its "attach" routine.  The "comedi_8255" module stores it in a
"subdevice private" data structure that is no longer known to the "8255"
module, so add a new, exported function `subdev_8255_regbase()` to
retrieve it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255: document callback parameters better

Several Comedi driver modules call `subdev_8255_init()` or
`subdev_8255_mm_init()` to set up a digital I/O subdevice based on the
"8255" chip.  One of the parameters to these functions is an optional
pointer to an I/O callback function to perform the actual register
accesses (an internal default callback function is used if NULL).

The kerneldoc for `subdev_8255_init()` and `subdev_8255_mm_init()`
describe the prototype of the optional I/O callback function
incorrectly (my fault), adding a non-existent parameter of type `struct
comedi_subdevice *`.  Fix the kerneldoc.  Also add parameter names to
the callback function pointer type wherever it occurs to make the usage
clearer.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255.h: don't include "../comedidev.h"

The Comedi "8255.h" header doesn't use anything from "comedidev.h" apart
from `struct comedi_device` and `struct comedi_subdevice`, which are
only used to construct corresponding pointer types within the parameter
lists of function prototypes.  Just declare those structure types
incompletely and don't bother including "comedidev.h".

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255: fix I/O region leak on failure

The Comedi "8255" driver does not clean up properly on failure.  It can
leave requested I/O port regions unreleased.  Specifically, the Comedi
"attach" handler (`dev_8255_attach()`) requests a specified I/O port
region before calling `subdev_8255_init()` to set up the subdevice.  If
that fails, the "attach" handler returns an error and the Comedi core
will call the "detach" handler (`dev_8255_detach()`) to clean up.  The
"detach" handler is responsible for releasing the I/O port regions
successfully requested by the "attach" handler.  Unfortunately, it is
unable to obtain the base address of the region if the call to
`subdev_8255_init()` failed.

Fix the I/O region leak by releasing the region in the "attach" handler
directly if the call to `subdev_8255_init()` fails.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: fix checkpatch warnings

clean up checkpatch.pl in prism2sta.c
 WARNING : line over 80 characters

Signed-off-by: chaehyun lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: check return value of kmalloc

check return value of kmalloc before accessing the memory pointer and
return -ENOMEM if allocation fails.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unused variable warning

A recent patch to simplify the lustre large memory allocation
causes new warnings as an unintended side-effect:

lustre/lov/lov_request.c: In function 'lov_finish_set':
lustre/lov/lov_request.c:78:7: warning: unused variable 'len' [-Wunused-variable]
   int len = set->set_oabufs * sizeof(*set->set_pga);
       ^
lustre/obdclass/acl.c: In function 'lustre_ext_acl_xattr_reduce_space':
lustre/obdclass/acl.c:123:6: warning: unused variable 'old_size' [-Wunused-variable]
  int old_size = CFS_ACL_XATTR_SIZE(old_count, ext_acl_xattr);
      ^

The reason is that the 'size' argument to OBD_FREE_LARGE()
is never needed, which was previously hidden by the extra
abstractions.

This avoids the warnings by adding a cast to void, to tell
the compiler that the argument is intentionally unused.
A better fix is probably to remove the entire set of allocation
macros and open-code the normal kernel interface calls.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 99d56ff7c1c ("staging/lustre: Always try kmalloc first for OBD_ALLOC_LARGE")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: remove LNET_MUTEX_LOCK macro

LNET_MUTEX_LOCK and LNET_MUTEX_UNLOCK are verbose wrappers to mutex_lock and
mutex_unlock.  Get rid of these.

Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: selftest: code cleanup - variable spacing, indentation

Unify spacing in variable declarations, and align indentation in headers.
General whitespace cleanups.

Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: socklnd: code cleanup - align spacing

Unify variable declarations to use a single space.  Also include several
miscellaneous whitespace cleanups, particularly in socklnd.h.

Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: o2iblnd: code cleanup - align whitespace

Unify variable declarations to use a single whitespace.  Also line up
declarations and comments in o2iblnd.h.

Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: lnet: Module is LNet, not Portals

Fix the module version to match upstream development.

Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: dead code - remove LNetSetAsync

LNetSetAsync() returns 0, and is never called.  Doesn't exist in the Intel
tree, either.  Remove it.

Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: dead code - remove lnet_fini_locks

lnet_fini_locks() does nothing.  Remove.

Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: lnet: code cleanups - variable declarations

Unify variable declarations to use a single space, and any other obvious
spacing flaws.

Signed-off-by: Mike Shuey <shuey@purdue.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Fixed typo

In the explanation of the function the name of the function was incorrect

Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Fix wrong identing in ll_setxattr_common

smatch has highlighted wrong indenting that results from
commit 7fc1f831d83f ("staging/lustre/llite: extended attribute cache")

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Fix potential NULL pointer dereference

In lov_unpackmd() there's this strange bit of code where we first try
to look inside of lmm striping pattern for it's type, and then
we check if the pattern is NULL which cannot be right.
Move the check under if (lmm) branch so that it's safe.

Found by Coverity version 6.6.1

Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-on: http://review.whamcloud.com/7827
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4049
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Signed-off: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ptlrpc: Fix wrong indenting in plain_authorize()

smatch highlighted a wrongly indented bit of code that almost
hides the extra assignment.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Only set INTERRUPTIBLE state before calling schedule

In __l_wait_event the condition could be a complicated function that does
allocations and other potentialy blocking activities, so it sohuld
not be called in a task state other than RUNNABLE

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: remove useless comment

"step 2" does mean much as there is no "step 1" stated anywhere...

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: remove useless return value

The loadparam() function cannot fail, it's called only once and its return
value is ignored there.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Greg Kroah-Hartman <gregkh@linux.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: fix sparse warning

change cast to __le16 to fix the following warning:
drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c:1488:20: warning: cast to restricted __le16

Signed-off-by: Juston Li <juston.h.li@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: remove redundant initialization

The variable pHalData is initialized twice in this same function with
same value.So removing one of them.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Use roundup_pow_of_two() in LNetEQAlloc()

Use roundup_pow_of_two() and drop the private cfs_power2_roundup()
implementation.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove duplicate helpers from libcfs.h

Remove bunch of duplicate helpers from libcfs.h that are guaranteed to
be present.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Remove __attribute__ definition from libcfs.h

Linux requires a GNU C compatible compiler so drop a pointless define.

Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: check kzalloc return value

check the return value of kzalloc before accessing the memory pointer

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Replace kzalloc and memcpy by kmemdup

This patch was generated by 'make coccicheck'

Signed-off-by: Balamanikandan Gunasundar <bgunasun@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lclient: lcommon_cl.c fixing coding style issues

This patch fixes the checkpatch.pl warning:

WARNING: else is not generally useful after a break or return
+                       return result;
+               } else {

Signed-off-by: Ankit Garg <kerneldvlper@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: kill unused helper

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: kill unused macro (LOOKUP_CONTINUE)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: off by one in wilc_wfi_cfg80211_mgmt_types

NL80211_IFTYPE_MAX represents the largest interface type number defined,
so declaring the array with that size will actually leave out the last
interface.

This causes invalid memory access whenever this array is used, which starts
happening at boot.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove __DRIVER_VERSION__ macro

The driver version is meaningless, and in particular does not
have to be passed from the Makefile. This removes the macros,
but leaves the behavior of printing the 10.2 version untouched
for the moment.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove thread wrapper

The wilc_thread code is a very thin wrapper around kthread,
so just remove it and use kthread directly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove platform version checks

For code that is integrated into mainline Linux, checks for
the OS platform make no sense, because we know that we
are on Linux.

This removes all checks and the associated dead code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove linux version checks

For code that is integrated into mainline Linux, checks for
the kernel version make no sense, because we know which version
we are compiling against.

This removes all checks and the associated dead code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/wilc1000: fix Kconfig dependencies

The newly added wilc1000 driver lacks several Kconfig dependencies,
resulting in a multitude of randconfig build errors, e.g.:

drivers/built-in.o: In function `WILC_WFI_mgmt_tx_cancel_wait':
binder.c:(.text+0x12bd28): undefined reference to `cfg80211_remain_on_channel_expired'
drivers/built-in.o: In function `WILC_WFI_CfgSetChannel':
binder.c:(.text+0x12c9d8): undefined reference to `ieee80211_frequency_to_channel'
drivers/built-in.o: In function `WILC_WFI_CfgAlloc':
binder.c:(.text+0x132530): undefined reference to `wiphy_new_nm'
drivers/built-in.o: In function `wilc_netdev_init':
binder.c:(.text+0x1356d0): undefined reference to `register_inetaddr_notifier'
drivers/built-in.o: In function `linux_spi_init':
binder.c:(.text+0x210a68): undefined reference to `spi_register_driver'

This change ensures that we always have at least one of SPI or MMC
enabled, and are only able to pick an interface that works. It also
adds all the missing dependencies for networking infrastructure
(cfg80211, wext, and ipv4).

In order to make it readable, I also took the liberty of re-indenting
the Kconfig file to the normal conventions.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Disable for S390

The wilc1000 driver uses definitions such as DEBUG_LEVEL, DEBUG,
and PRINT_INFO. This causes compile errors on S390 which has similar
definitions in its core code. Disable the driver for S390 instead
of giving the non-standard messaging code credit by trying to fix it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Include linux/gpio.h instead of asm/gpio.h

Fix:

drivers/staging/wilc1000/linux_wlan.c:18:22: fatal error:
asm/gpio.h: No such file or directory

Not every architecture has asm/gpio.h. Include linux/gpio.h instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: MAINTAINERS: add maintainer for wilc1000 device

Add myself as maintainer for atmel wilc1000

Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Chris Park <chris.park@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Add SDIO/SPI 802.11 driver

This driver is for the wilc1000 which is a single chip IEEE 802.11
b/g/n device.
The driver works together with cfg80211, which is the kernel side of
configuration management for wireless devices because the wilc1000
chipset is fullmac where the MLME is managed in hardware.

The driver worked from kernel version 2.6.38 and being now ported
to several others since then.
A TODO file is included as well in this commit.

Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Rachel Kim <rachel.kim@atmel.com>
Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Chris Park <chris.park@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: panel: fix stackdump

if we load the module, unload and then again try to load the module, we
will get a stackdump. In the module_exit function we are unregistering
the device and releasing the parport. So when we reach the detach
function parport is already null and the unregister_reboot_notifier()
is never called. When we again try to load the module it again tries
register_reboot_notifier() and gives us a stackdump as its earlier
registration is still not removed. It was caused by the
commit bb046fef9668 ('staging: panel: register reboot')
Fix this by moving all the unregistering and releasing in the detach
function, which should be the ideal case as the detach will be called if
we try to unregister the driver or if the parport is removed.

Fixes: bb046fef9668 ('staging: panel: register reboot')
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750: Fix lynxfb_ops_imageblit() if image->depth != 1

If image->depth != 1, lynxfb_ops_imageblit() should fallback to call
cfb_imageblit(), not return directly. Otherwise it can't display the
boot logo.

Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use arch_phys_wc_add() and ioremap_wc()

The same area used for ioremap() is used for the MTRR area.
Convert the driver from using the x86 specific MTRR code to
the architecture agnostic arch_phys_wc_add(). arch_phys_wc_add()
will avoid MTRR if write-combining is available, in order to
take advantage of that also ensure the ioremap'd area is requested
as write-combining.

There are a few motivations for this:

a) Take advantage of PAT when available

b) Help bury MTRR code away, MTRR is architecture specific and on
   x86 its replaced by PAT

c) Help with the goal of eventually using _PAGE_CACHE_UC over
   _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit
   de33c442e titled "x86 PAT: fix performance drop for glx,
   use UC minus for ioremap(), ioremap_nocache() and
   pci_mmap_page_range()")

The conversion done is expressed by the following Coccinelle
SmPL patch, it additionally required manual intervention to
address all the #ifdery and removal of redundant things which
arch_phys_wc_add() already addresses such as verbose message
about when MTRR fails and doing nothing when we didn't get
an MTRR.

@ mtrr_found @
expression index, base, size;
@@

-index = mtrr_add(base, size, MTRR_TYPE_WRCOMB, 1);
+index = arch_phys_wc_add(base, size);

@ mtrr_rm depends on mtrr_found @
expression mtrr_found.index, mtrr_found.base, mtrr_found.size;
@@

-mtrr_del(index, base, size);
+arch_phys_wc_del(index);

@ mtrr_rm_zero_arg depends on mtrr_found @
expression mtrr_found.index;
@@

-mtrr_del(index, 0, 0);
+arch_phys_wc_del(index);

@ mtrr_rm_fb_info depends on mtrr_found @
struct fb_info *info;
expression mtrr_found.index;
@@

-mtrr_del(index, info->fix.smem_start, info->fix.smem_len);
+arch_phys_wc_del(index);

@ ioremap_replace_nocache depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap_nocache(base, size);
+info->screen_base = ioremap_wc(base, size);

@ ioremap_replace_default depends on mtrr_found @
struct fb_info *info;
expression base, size;
@@

-info->screen_base = ioremap(base, size);
+info->screen_base = ioremap_wc(base, size);

Generated-by: Coccinelle SmPL
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: I2O cleanup

Remove the last reference on menuconfig I20 that has been removed by
commit 4a72a7af462d ("staging: remove i2o subsystem").

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: cleanup UNISYS_VISORUTIL

Commit 53490b545cb0 ("staging: unisys: move periodic_work.c into the
visorbus directory") removed the Kconfig option UNISYS_VISORUTIL, but
left one reference in a Kconfig select.  Remove this last reference.

Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Convert device functions to pass dev_info pointer around

Most device functions pass bus_no and dev_no around and then do a lookup
inside each function to find the dev_info struct.  Instead just pass the
pointer.

This prepares us for a later conversion to using visor device.

No real technical changes.  Just function header changes and little
cleanups as a result.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Convert bus functions to pass bus_info pointer around

Most bus functions pass bus_no around and then do a lookup inside each
function to find the bus_info struct.  Instead just pass the pointer.

This prepares us for a later conversion to using visor_device.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Convert the device attributes to visor_device

Convert the device attribute files to properly use visor_device.
This removes a whole bunch of checks and assumptions and simplifies
the code.  Everything is straightforward.

No testing down as I can't mimic channel info correctl.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove unused intr

The conversion to visor_device caused some compile issues.The main
problem was the new fields in 'struct visor_device' were not public.
Remove one that wasn't being used for now.

struct irq_info intr

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Add checks for creation

There was a bunch of channel creation checks before the
visorchannel_create function was called, moving some of those
checks inside.  This keeps the outside code cleaner and handles
the situation where a caller forgets to make these checks.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Add a function to set the clientpartition

This patch is an attempt to help hide the channel info behind
accessory functions.  I was trying to keep visorchannel as private
as possible.

The only function missing that seemed to be needed for now was
the ability to set the clientpartition.  So I expose that here.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Add visor device find routine

If we are going to remove the bus_info structs than we need a way
to find the devices when the *_create/destroy cmds are sent over
the vmchannel.

This function crudely impements what pci has.  It takes a bus_no
and dev_no and finds the matching 'struct visor_device'.

This function can/should be optimzed later once we get our heads
wrapped around its needs.  For now, I am using dev_no=0 to mean
the visorbus itself.

The function is limited to chipset.c only because it is only needed
to do the lookups upon receiving a vmchannel command.  Future patches
will make sure the resulting 'struct visor_device' is used every
where else.

Also allow visorbus_type to be more visible for use.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Prep for removing 'info' structs

The visorbus driver has three _info structs lying around
(device, bus, channel) that store subsets of info from the
bigger structs.

Having these structs around make resource handling very difficult
and more complicated than it needs to be.  Use the device
infrastructure and instead pass 'struct visor_device' all
over the place.

In order to do that 'struct visor_device' needs to get smarter.
This patch adds the pieces to prep for it.  The new elements
will be used in later patches.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Clean up device sysfs attributes

Properly hook into the struct device groups element.  This allows the
core infrastructure to manage the files instead of the bus layer.  And
makes the code easier to read.

I didn't clean up the _show functions just modified them a bit to handle
the different args for now and to prevent a build warning.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove dead kobj structs

Remove stale code.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Properly move version file into bus attr

Simplify things by moving the version file handling into the core.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Move the visorbus device underneath devices

Mimicing what other drivers do, this seems appropriate.  Yeah, it
is a bus, but it is a bus _device_.  This makes things work better
and smoother.  Now the sysfs looks like

[root@dhcp-17-174 visorbus]# ls -l /sys/bus/visorbus/devices/
total 0
lrwxrwxrwx. 1 root root 0 Apr 17 16:09 vbus1:dev2 ->
../../../devices/visorbus1/vbus1:dev2
lrwxrwxrwx. 1 root root 0 Apr 17 16:09 visorbus1 ->
../../../devices/visorbus1

Which looks correct.  All the attributes are still correct too, based on my
very minimal testing of 'ls -lR'. :-)

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Wire up proper device attr for bus

This patch moves the attributes to underneath the bus device correctly.
This will help remove a bunch of cruft from the code and let the kernel
infrastructure manage the sysfs files instead of the driver.

After the move remove all the leftover code.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Embed struct device for easier handling of attr

Handling the sysfs attributes become easier to deal with when you can just
run container_of(dev) to get devdata.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove temporarily added visorbus/ include in Makefile

Now that the header file movement is complete, remove the temporary ccflags
include

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove remaining utility headers

remove uisqueue.h, uisthread.h, and uisutils.h
replace HOSTADDRESS with u64
remove "uisutils.h" from header list in visorchipset.c

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: get rid of sparstop

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Get rid of references to common-spar

Makefiles still had common-spar listed in ccflags.

This gets rid of them.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Move files out of common-spar

Move last three files out of common-spar

iochannel.h --> include (will be used by visorhba and visornic)
version.h --> moved to include
controlvmcompletionstatus.h --> moved to visorbus, part of
controlvmchannel.h

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Move diagchannel to include

Diagchannel needs to go to standard include.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: vbuschannel belonsg to visorbus

Move vbuschannel.h into visorbus.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Move channel.h to include. Controvlm to visorbus

Channel.h is used by all channels, it needs to be in include.
Controlvm Channel is only used by visorbus, it needs to just be there.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Move controlframework into controlvmchannel.h

Controlframework was only needed by controlvmchannel, move the
structures into that header file.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: move hypervisor calls into visorbus

Move hypervisor calls into visorbus and move vbusdeviceinfo.h into
visorbus.
Drivers will call into that to update clientInfo field.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Temporarily add visorbus/ ccflags

To prep for the moving of include files, temporarily add the
visorbus/ as a ccflags -I.  Once the header files are all
transitioned, we can remove this.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Include missing headers

This preps for the possible build breakage in the next few
patches.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
[updated changelog to reflect new patch order; instead
of 'fixes' the patch 'prevents' - dcz]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove appos_subsystems.h

Get rid of common-spar/include/diagnostics/appos_subsystems.h.

No one is using it.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove unused livedump_info

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset_init(): Simplify initial checks

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove unused visorchipset_save_message()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorchipset_file_{init, cleanup}(): mark static

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:Android:ion - Fix for memory leak if ion device registration get failed.

Fix to avoid possible memory leak if the ion device registration
get failed.Free the allocated device creation memory before return
in case the ion device registration get failed.

Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Add more help description on Kconfig

This patch adds more help description on android Kconfig for
- lowmemory killer
- Timed gpio (same for timed output)

Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: fix style for multi-line comments in cb_pcidas64.c

This patch reformat multi-line comments which are not properly written
according to the kernel coding style in cb_pcidas64.c

Signed-off-by: Amaury Denoyelle <amaury.denoyelle@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: fix line longer than 80 chars in cb_pcidas64.c

This patch fixes coding style errors reported by checkpatch.pl for
cb_pcidas64.c, about too long source code lines.

Signed-off-by: Amaury Denoyelle <amaury.denoyelle@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: staging: comedi: comedi: Fixed comment spelling error

Fixed a spelling error in a comment.

Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-v4.2b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new driver, functionality and cleanups for IIO in the 4.2 cycle.

Core functionality
* i and q modifiers from quadrature channels.
* IIO_CHAN_INFO_OVERSAMPLING_RATIO added.
* High pass filter attributes added to mirror the existing low pass filter
  ones.

Core cleanups
* Make IIO tools building more cross compiler friendly.
* Substantial rework of the function __iio_update_buffers to greatly simplify
  a hideously evolved function.

New drivers and support
* ACPI0008 ambient light sensor driver. This one has been around a long time to
  will be good to finally get it into mainline.
* Berlin SOC ADC support.
* BMC150 magnetometer.  The accelerometer in the same package has been supported
  for quite some time, so good to have this half as well.
* m62332 DAC driver
* MEMSIC MMC35420 magnetometer.
* ROHM BH1710 and similar ambient light sensors.
* Sensortek STK3310 light sensor.
* Sensortek STK8312 accelerometer.
* Sensortek STK8BA50 accelerometer.
* ti-adc128s052 gains support form the adc122s021 2 channel ADC.

Driver cleanups and functionality.
* Allow various drivers to compile with !GPIOLIB if COMPILE_TEST enabled.
* bmc150 - decouple trigger from buffer to allow other triggers to be used.
* bmg160 - decouple trigger from buffer to allow other triggers to be used.
  Fix a trivial unused field.
* Constify a load of platform_device_id structures.
* inv_mpu6050 - device tree bindings.
* hid-sensors - fix a memory leak during probe if certain errors occur.
* ltr501 - illuminance channel derived (in an non obvious fashion) from the
  intensity channels.
* ltr501 - fix a boundary check on the proximity threshold.
* mlx90614 - drop a pointless return.
* mma8452 - Debugfs register access and fix a bug that had no effect (by
  coincidence)
* ti_am335x_adc - add device tree bindings for sample-delay, open-delay and
  averaging.  The ideal settings for these tend to be board design specific.

iio: accel: Add support for Sensortek STK8BA50

Minimal implementation of an IIO driver for the Sensortek
STK8BA50 3-axis accelerometer. Datasheet:
http://szgsensor.com/uploads/soft/141229/STK8BA50%D2%E5%BC%CE.pdf

Includes:
- ACPI support;
- read_raw for x,y,z axes;
- reading and setting the scale (range) parameter.
- power management

Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: __iio_update_buffers: Leave device in sane state on error

Currently when something goes wrong at some step when disabling the buffers
we immediately abort. This has the effect that the enable/disable calls are
no longer balanced. So make sure that even if one step in the disable
sequence fails the other steps are still executed.

The other issue is that when either enable or disable fails buffers that
were active at that time stay active while the device itself is disabled.
This leaves things in a inconsistent state and can cause unbalanced
enable/disable calls. Furthermore when enable fails we restore the old scan
mask, but still keeps things disabled.

Given that verification of the configuration was performed earlier and it
is valid at the point where we try to enable/disable the most likely reason
of failure is a communication failure with the device or maybe a
out-of-memory situation. There is not really a good recovery strategy in
such a case, so it makes sense to leave the device disabled, but we should
still leave it in a consistent state.

What the patch does if disable/enable fails is to deactivate all buffers
and make sure that the device will be in the same state as if all buffers
had been manually disabled.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: __iio_update_buffers: Split enable and disable path into helper functions

__iio_update_buffers is already a rather large function with many different
error paths and it is going to get even larger. This patch factors out the
device enable and device disable paths into separate helper functions.

The patch also re-implements iio_disable_all_buffers() using the new
iio_disable_buffers() function removing a fair bit of redundant code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: __iio_update_buffers: Verify configuration before starting to apply it

Currently __iio_update_buffers() verifies whether the new configuration
will work in the middle of the update sequence. This means if the new
configuration is invalid we need to rollback the changes already made. This
patch moves the validation of the new configuration at the beginning of
__iio_update_buffers() and will not start to make any changes if the new
configuration is invalid.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:adc128s052: add support for adc122s021

Signed-off-by: Urs Fässler <urs.fassler@bytesatwork.ch>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>