crypto: rsa-pkcs1pad - use constant time memory comparison for MACs

commit fec17cb2231733174e039ad9054fa16bb358e2ec upstream.

Otherwise, we enable all sorts of forgeries via timing attack.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Stephan Müller <smueller@chronox.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: caam - fix gfp allocation flags (part I)

commit 42cfcafb91dabb0f9d9e08396c39824535948c67 upstream.

Changes in the SW cts (ciphertext stealing) code in
commit 0605c41cc53ca ("crypto: cts - Convert to skcipher")
revealed a problem in the CAAM driver:
when cts(cbc(aes)) is executed and cts runs in SW,
cbc(aes) is offloaded in CAAM; cts encrypts the last block
in atomic context and CAAM incorrectly decides to use GFP_KERNEL
for memory allocation.

Fix this by allowing GFP_KERNEL (sleeping) only when MAY_SLEEP flag is
set, i.e. remove MAY_BACKLOG flag.

We split the fix in two parts - first is sent to -stable, while the
second is not (since there is no known failure case).

Link: http://lkml.kernel.org/g/20170602122446.2427-1-david@sigma-star.at
Reported-by: David Gstir <david@sigma-star.at>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: fix clean-up of comedi_class in comedi_init()

commit a9332e9ad09c2644c99058fcf6ae2f355e93ce74 upstream.

There is a clean-up bug in the core comedi module initialization
functions, `comedi_init()`.  If the `comedi_num_legacy_minors` module
parameter is non-zero (and valid), it creates that many "legacy" devices
and registers them in SysFS.  A failure causes the function to clean up
and return an error.  Unfortunately, it fails to destroy the "comedi"
class that was created earlier.  Fix it by adding a call to
`class_destroy(comedi_class)` at the appropriate place in the clean-up
sequence.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6556: vnt_start Fix missing call to vnt_key_init_table.

commit dc32190f2cd41c7dba25363ea7d618d4f5172b4e upstream.

The key table is not intialized correctly without this call.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/rwsem-spinlock: Fix EINTR branch in __down_write_common()

commit a0c4acd2c220376b4e9690e75782d0c0afdaab9f upstream.

If a writer could been woken up, the above branch

if (sem->count == 0)
break;

would have moved us to taking the sem. So, it's
not the time to wake a writer now, and only readers
are allowed now. Thus, 0 must be passed to __rwsem_do_wake().

Next, __rwsem_do_wake() wakes readers unconditionally.
But we mustn't do that if the sem is owned by writer
in the moment. Otherwise, writer and reader own the sem
the same time, which leads to memory corruption in
callers.

rwsem-xadd.c does not need that, as:

  1) the similar check is made lockless there,
  2) in __rwsem_mark_wake::try_reader_grant we test,

that sem is not owned by writer.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Niklas Cassel <niklas.cassel@axis.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 17fcbd590d0c "locking/rwsem: Fix down_write_killable() for CONFIG_RWSEM_GENERIC_SPINLOCK=y"
Link: http://lkml.kernel.org/r/149762063282.19811.9129615532201147826.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix super_offset endianness in super_1_rdev_size_change

commit 3fb632e40d7667d8bedfabc28850ac06d5493f54 upstream.

The sb->super_offset should be big-endian, but the rdev->sb_start is in
host byte order, so fix this by adding cpu_to_le64.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: fix incorrect use of lexx_to_cpu in does_sb_need_changing

commit 1345921393ba23b60d3fcf15933e699232ad25ae upstream.

The sb->layout is of type __le32, so we shoud use le32_to_cpu.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Add error checks to offline probe post-processing

commit 3e96dac7c956089d3f23aca98c4dfca57b6aaf8a upstream.

Add error check codes on post processing and improve it for offline
probe events as:

 - post processing fails if no matched symbol found in map(-ENOENT)
   or strdup() failed(-ENOMEM).

 - Even if the symbol name is the same, it updates symbol address
   and offset.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf probe: Fix to probe on gcc generated symbols for offline kernel

commit 8a937a25a7e3c19d5fb3f9d92f605cf5fda219d8 upstream.

Fix perf-probe to show probe definition on gcc generated symbols for
offline kernel (including cross-arch kernel image).

gcc sometimes optimizes functions and generate new symbols with suffixes
such as ".constprop.N" or ".isra.N" etc. Since those symbol names are
not recorded in DWARF, we have to find correct generated symbols from
offline ELF binary to probe on it (kallsyms doesn't correct it).  For
online kernel or uprobes we don't need it because those are rebased on
_text, or a section relative address.

E.g. Without this:

  $ perf probe -k build-arm/vmlinux -F __slab_alloc*
  __slab_alloc.constprop.9
  $ perf probe -k build-arm/vmlinux -D __slab_alloc
  p:probe/__slab_alloc __slab_alloc+0

If you put above definition on target machine, it should fail
because there is no __slab_alloc in kallsyms.

With this fix, perf probe shows correct probe definition on
__slab_alloc.constprop.9:

  $ perf probe -k build-arm/vmlinux -D __slab_alloc
  p:probe/__slab_alloc __slab_alloc.constprop.9+0

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148350060434.19001.11864836288580083501.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf scripting perl: Fix compile error with some perl5 versions

commit d7dd112ea5cacf91ae72c0714c3b911eb6016fea upstream.

Fix below compile error:

  CC       util/scripting-engines/trace-event-perl.o
  In file included from /usr/lib/perl5/5.22.2/i686-linux/CORE/perl.h:5673:0,
                   from util/scripting-engines/trace-event-perl.c:31:
  /usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h: In function 'S__is_utf8_char_slow':
  /usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h:270:5: error: nested extern declaration of 'Perl___notused' [-Werror=nested-externs]
          dTHX;   /* The function called below requires thread context */
     ^
  cc1: all warnings being treated as errors

After digging perl5 repository, I find out that we will meet this
compile error with perl from v5.21.1 to v5.25.4

Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170212024655.GA15997@udknight
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf header: Fix handling of PERF_EVENT_UPDATE__SCALE

commit 8434a2ec13d5c8cb25716950bfbf7c9d7b64628a upstream.

In commit daeecbc0c431 ("perf tools: Add event_update event scale type"), the
handling of PERF_EVENT_UPDATE__SCALE cast struct event_update_event->data to a
pointer to event_update_event_scale, uses some field from this casted struct
and then ends up falling through to the handling of another event type,
PERF_EVENT_UPDATE__CPUS were it casts that ev->data to yet another type, oops,
fix it by inserting the missing break.

Noticed when building perf using gcc 7 on Fedora Rawhide:

  util/header.c: In function 'perf_event__process_event_update':
  util/header.c:3207:16: error: this statement may fall through [-Werror=implicit-fallthrough=]
     evsel->scale = ev_scale->scale;
     ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
  util/header.c:3208:2: note: here
    case PERF_EVENT_UPDATE__CPUS:
    ^~~~

This wasn't noticed because probably PERF_EVENT_UPDATE__CPUS comes after
PERF_EVENT_UPDATE__SCALE, so we would just create a bogus evsel->own_cpus when
processing a PERF_EVENT_UPDATE__SCALE to then leak it and create a new cpu map
with the correct data.

Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: daeecbc0c431 ("perf tools: Add event_update event scale type")
Link: http://lkml.kernel.org/n/tip-lukcf9hdj092ax2914ss95at@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf bench numa: Avoid possible truncation when using snprintf()

commit 3aff8ba0a4c9c9191bb788171a1c54778e1246a2 upstream.

Addressing this warning from gcc 7:

    CC       /tmp/build/perf/bench/numa.o
  bench/numa.c: In function '__bench_numa':
  bench/numa.c:1582:42: error: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 8 and 17 [-Werror=format-truncation=]
       snprintf(tname, 32, "process%d:thread%d", p, t);
                                            ^~
  bench/numa.c:1582:25: note: directive argument in the range [0, 2147483647]
       snprintf(tname, 32, "process%d:thread%d", p, t);
                           ^~~~~~~~~~~~~~~~~~~~
  In file included from /usr/include/stdio.h:939:0,
                   from bench/../util/util.h:47,
                   from bench/../builtin.h:4,
                   from bench/numa.c:11:
  /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 17 and 35 bytes into a destination of size 32
     return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          __bos (__s), __fmt, __va_arg_pack ());
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-twa37vsfqcie5gwpqwnjuuz9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tests: Avoid possible truncation with dirent->d_name + snprintf

commit 2e2bbc039fad9eabad6c4c1a473c8b2554cdd2d4 upstream.

Addressing a few cases spotted by a new warning in gcc 7:

  tests/parse-events.c: In function 'test_pmu_events':
  tests/parse-events.c:1790:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 90 [-Werror=format-truncation=]
     snprintf(name, MAX_NAME, "cpu/event=%s/u", ent->d_name);
                                       ^~
  In file included from /usr/include/stdio.h:939:0,
                   from /git/linux/tools/perf/util/map.h:9,
                   from /git/linux/tools/perf/util/symbol.h:7,
                   from /git/linux/tools/perf/util/evsel.h:10,
                   from tests/parse-events.c:3:
  /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 13 and 268 bytes into a destination of size 100
     return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          __bos (__s), __fmt, __va_arg_pack ());
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  tests/parse-events.c:1798:29: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 100 [-Werror=format-truncation=]
     snprintf(name, MAX_NAME, "%s:u,cpu/event=%s/u", ent->d_name, ent->d_name);

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 945aea220bb8 ("perf tests: Move test objects into 'tests' directory")
Link: http://lkml.kernel.org/n/tip-ty4q2p8zp1dp3mskvubxskm5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Use __fallthrough

commit 7ea6856d6f5629d742edc23b8b76e6263371ef45 upstream.

To address new warnings emmited by gcc 7, e.g.::

    CC       /tmp/build/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.o
    CC       /tmp/build/perf/tests/parse-events.o
  util/intel-pt-decoder/intel-pt-pkt-decoder.c: In function 'intel_pt_pkt_desc':
  util/intel-pt-decoder/intel-pt-pkt-decoder.c:499:6: error: this statement may fall through [-Werror=implicit-fallthrough=]
     if (!(packet->count))
        ^
  util/intel-pt-decoder/intel-pt-pkt-decoder.c:501:2: note: here
    case INTEL_PT_CYC:
    ^~~~
    CC       /tmp/build/perf/util/intel-pt-decoder/intel-pt-decoder.o
  cc1: all warnings being treated as errors

Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mf0hw789pu9x855us5l32c83@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf thread_map: Correctly size buffer used with dirent->dt_name

commit bdf23a9a190d7ecea092fd5c4aabb7d4bd0a9980 upstream.

The size of dirent->dt_name is NAME_MAX + 1, but the size for the 'path'
buffer is hard coded at 256, which may truncate it because we also
prepend "/proc/", so that all that into account and thank gcc 7 for this
warning:

  /git/linux/tools/perf/util/thread_map.c: In function 'thread_map__new_by_uid':
  /git/linux/tools/perf/util/thread_map.c:119:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 250 [-Werror=format-truncation=]
     snprintf(path, sizeof(path), "/proc/%s", dirent->d_name);
                                         ^~
  In file included from /usr/include/stdio.h:939:0,
                   from /git/linux/tools/perf/util/thread_map.c:5:
  /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 7 and 262 bytes into a destination of size 256
     return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          __bos (__s), __fmt, __va_arg_pack ());
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-csy0r8zrvz5efccgd4k12c82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf top: Use __fallthrough

commit 7b0214b702ad8e124e039a317beeebb3f020d125 upstream.

The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:

    CC       /tmp/build/perf/builtin-top.o
  builtin-top.c: In function 'display_thread':
  builtin-top.c:644:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
      if (errno == EINTR)
         ^
  builtin-top.c:647:3: note: here
     default:
   ^~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lmcfnnyx9ic0m6j0aud98p4e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools strfilter: Use __fallthrough

commit d64b721d27aef3fbeb16ecda9dd22ee34818ff70 upstream.

The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:

  util/strfilter.c: In function 'strfilter_node__sprint':
  util/strfilter.c:270:6: error: this statement may fall through [-Werror=implicit-fallthrough=]
     if (len < 0)
        ^
  util/strfilter.c:272:2: note: here
    case '!':
    ^~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-z2dpywg7u8fim000hjfbpyfm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools string: Use __fallthrough in perf_atoll()

commit 94bdd5edb34e472980d1e18b4600d6fb92bd6b0a upstream.

The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:

    CC       /tmp/build/perf/util/string.o
  util/string.c: In function 'perf_atoll':
  util/string.c:22:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
      if (*p)
         ^
  util/string.c:24:3: note: here
     case '\0':
     ^~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0ophb30v9apkk6o95el0rqlq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools include: Add a __fallthrough statement

commit b5bf1733d6a391c4e90ea8f8468d83023be74a2a upstream.

For cases where implicit fall through case labels are intended,
to let us inform that to gcc >= 7:

    CC       /tmp/build/perf/util/string.o
  util/string.c: In function 'perf_atoll':
  util/string.c:22:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
      if (*p)
         ^
  util/string.c:24:3: note: here
     case '\0':
     ^~~~

So we introduce:

  #define __fallthrough __attribute__ ((fallthrough))

And use it in such cases.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/n/tip-qnpig0xfop4hwv6k4mv1wts5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: Issue a TPM2_Shutdown for TPM2 devices.

commit d1bd4a792d3961a04e6154118816b00167aad91a upstream.

If a TPM2 loses power without a TPM2_Shutdown command being issued (a
"disorderly reboot"), it may lose some state that has yet to be
persisted to NVRam, and will increment the DA counter. After the DA
counter gets sufficiently large, the TPM will lock the user out.

NOTE: This only changes behavior on TPM2 devices. Since TPM1 uses sysfs,
and sysfs relies on implicit locking on chip->ops, it is not safe to
allow this code to run in TPM1, or to add sysfs support to TPM2, until
that locking is made explicit.

Signed-off-by: Josh Zimmerman <joshz@google.com>
Fixes: 74d6b3ceaa17 ("tpm: fix suspend/resume paths for TPM 2.0")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add "shutdown" to "struct class".

commit f77af15165847406b15d8f70c382c4cb15846b2a upstream.

The TPM class has some common shutdown code that must be executed for
all drivers. This adds some needed functionality for that.

Signed-off-by: Josh Zimmerman <joshz@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 74d6b3ceaa17 ("tpm: fix suspend/resume paths for TPM 2.0")
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mqueue: fix a use-after-free in sys_mq_notify()

commit f991af3daabaecff34684fd51fac80319d1baad1 upstream.

The retry logic for netlink_attachskb() inside sys_mq_notify()
is nasty and vulnerable:

1) The sock refcnt is already released when retry is needed
2) The fd is controllable by user-space because we already
   release the file refcnt

so we when retry but the fd has been just closed by user-space
during this small window, we end up calling netlink_detachskb()
on the error path which releases the sock again, later when
the user-space closes this socket a use-after-free could be
triggered.

Setting 'sock' to NULL here should be sufficient to fix it.

Reported-by: GeneBlue <geneblue.mail@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.37

rt286: add Thinkpad Helix 2 to force_combo_jack_table

commit fe0dfd6358a17c79bd7d6996af7512ba452a7059 upstream.

Thinkpad Helix 2 is a tablet PC, the audio is powered by Core M
broadwell-audio and rt286 codec. For all versions of Linux kernel,
the stereo output doesn't work properly when earphones are plugged
in, the sound was coming out from both channels even if the audio
contains only the left or right channel. Furthermore, if a music
recorded in stereo is played, the two channels cancle out each other
out, as a result, no voice but only distorted background music can be
heard, like a sound card with builtin a Karaoke sount effect.

Apparently this tablet uses a combo jack with polarity incorrectly
set by rt286 driver. This patch adds DMI information of Thinkpad Helix 2
to force_combo_jack_table[] and the issue is resolved. The microphone
input doesn't work regardless to the presence of this patch and still
needs help from other developers to investigate.

This is my first patch to LKML directly, sorry for CC-ing too many
people here.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=93841
Signed-off-by: Yifeng Li <tomli@tomli.me>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/uverbs: Check port number supplied by user verbs cmds

commit 5ecce4c9b17bed4dc9cb58bfb10447307569b77b upstream.

The ib_uverbs_create_ah() ind ib_uverbs_modify_qp() calls receive
the port number from user input as part of its attributes and assumes
it is valid. Down on the stack, that parameter is used to access kernel
data structures.  If the value is invalid, the kernel accesses memory
it should not.  To prevent this, verify the port number before using it.

BUG: KASAN: use-after-free in ib_uverbs_create_ah+0x6d5/0x7b0
Read of size 4 at addr ffff880018d67ab8 by task syz-executor/313

BUG: KASAN: slab-out-of-bounds in modify_qp.isra.4+0x19d0/0x1ef0
Read of size 4 at addr ffff88006c40ec58 by task syz-executor/819

Fixes: 67cdb40ca444 ("[IB] uverbs: Implement more commands")
Cc: Yevgeny Kliteynik <kliteyn@mellanox.com>
Cc: Tziporet Koren <tziporet@mellanox.com>
Cc: Alex Polak <alexpo@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: drbg - Fixes panic in wait_for_completion call

commit b61929c654f2e725644935737c4c1ea9c741e2f8 upstream.

Initialise ctr_completion variable before use.

Cc: <stable@vger.kernel.org>
Signed-off-by: Harsh Jain <harshjain.prof@gmail.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: Fix an error code in request_master_key()

commit 57cb17e764ba0aaa169d07796acce54ccfbc6cae upstream.

This function has two callers and neither are able to handle a NULL
return.  Really, -EINVAL is the correct thing return here anyway.  This
fixes some static checker warnings like:

security/keys/encrypted-keys/encrypted.c:709 encrypted_key_decrypt()
error: uninitialized symbol 'master_key'.

Fixes: 7e70cb497850 ("keys: add new key-type encrypted")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: override CE5 config for QCA9377

commit b08b5b53a1ed2bd7a883f8fd29232c8f03604671 upstream.

Similarly to QCA6174, QCA9377 requires the CE5 configuration to be
available for other feature. Use the ath10k_pci_override_ce_config()
for it as well.

This is required for TF2.0 firmware. Previous FW revisions were
working fine without this patch.

Fixes: a70587b3389a ("ath10k: configure copy engine 5 for HTT messages")
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/uaccess: Optimize copy_user_enhanced_fast_string() for short strings

commit 236222d39347e0e486010f10c1493e83dbbdfba8 upstream.

According to the Intel datasheet, the REP MOVSB instruction
exposes a pretty heavy setup cost (50 ticks), which hurts
short string copy operations.

This change tries to avoid this cost by calling the explicit
loop available in the unrolled code for strings shorter
than 64 bytes.

The 64 bytes cutoff value is arbitrary from the code logic
point of view - it has been selected based on measurements,
as the largest value that still ensures a measurable gain.

Micro benchmarks of the __copy_from_user() function with
lengths in the [0-63] range show this performance gain
(shorter the string, larger the gain):

 - in the [55%-4%] range on Intel Xeon(R) CPU E5-2690 v4
 - in the [72%-9%] range on Intel Core i7-4810MQ

Other tested CPUs - namely Intel Atom S1260 and AMD Opteron
8216 - show no difference, because they do not expose the
ERMS feature bit.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/4533a1d101fd460f80e21329a34928fad521c1d4.1498744345.git.pabeni@redhat.com
[ Clarified the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>

x86/tools: Fix gcc-7 warning in relocs.c

commit 7ebb916782949621ff6819acf373a06902df7679 upstream.

gcc-7 warns:

In file included from arch/x86/tools/relocs_64.c:17:0:
arch/x86/tools/relocs.c: In function ‘process_64’:
arch/x86/tools/relocs.c:953:2: warning: argument 1 null where non-null expected [-Wnonnull]
  qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/tools/relocs.h:6:0,
                 from arch/x86/tools/relocs_64.c:1:
/usr/include/stdlib.h:741:13: note: in a call to function ‘qsort’ declared here
 extern void qsort

This happens because relocs16 is not used for ELF_BITS == 64,
so there is no point in trying to sort it.

Make the sort_relocs(&relocs16) call 32bit only.

Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: http://lkml.kernel.org/r/20161215124513.GA289@x4
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: fix a kernel memory leak in tpm-sysfs.c

commit 13b47cfcfc60495cde216eef4c01040d76174cbe upstream.

While cleaning up sysfs callback that prints EK we discovered a kernel
memory leak. This commit fixes the issue by zeroing the buffer used for
TPM command/response.

The leak happen when we use either tpm_vtpm_proxy, tpm_ibmvtpm or
xen-tpmfront.

Fixes: 0883743825e3 ("TPM: sysfs functions consolidation")
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Fix glock rhashtable rcu bug

commit 961ae1d83d055a4b9ebbfb4cc8ca62ec1a7a3b74 upstream.

Before commit 88ffbf3e03 "GFS2: Use resizable hash table for glocks",
glocks were freed via call_rcu to allow reading the glock hashtable
locklessly using rcu.  This was then changed to free glocks immediately,
which made reading the glock hashtable unsafe.  Bring back the original
code for freeing glocks via call_rcu.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Limit USB2 port wake support for AMD Promontory hosts

commit dec08194ffeccfa1cf085906b53d301930eae18f upstream.

For AMD Promontory xHCI host, although you can disable USB 2.0 ports in
BIOS settings, those ports will be enabled anyway after you remove a
device on that port and re-plug it in again. It's a known limitation of
the chip. As a workaround we can clear the PORT_WAKE_BITS.

This will disable wake on connect, disconnect and overcurrent on
AMD Promontory USB2 ports

[checkpatch cleanup and commit message reword -Mathias]
Cc: Tsai Nicholas <nicholas.tsai@amd.com>
Signed-off-by: Jiahau Chang <Lars_Chang@asmedia.com.tw>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: qcserial: new Sierra Wireless EM7305 device ID

commit 996fab55d864ed604158f71724ff52db1c2454a3 upstream.

A new Sierra Wireless EM7305 device ID used in a Toshiba laptop.

Reported-by: Petr Kloc <petr_kloc@yahoo.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add two Longcheer device ids

commit 8fb060da715ad10fe956d7c0077b2fb0c12bb9d7 upstream.

Add two Longcheer device-id entries which specifically enables a
Telewell TW-3G HSPA+ branded modem (0x9801).

Reported-by: Teemu Likonen <tlikonen@iki.fi>
Reported-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Lars Melin <larsm17@gmail.com>
Tested-by: Teemu Likonen <tlikonen@iki.fi>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sh-pfc: Update info pointer after SoC-specific init

commit 3091ae775fae17084013021d01513bc1ad274e6a upstream.

Update the sh_pfc_soc_info pointer after calling the SoC-specific
initialization function, as it may have been updated to e.g. handle
different SoC revisions.  This makes sure the correct subdriver name is
printed later.

Fixes: 0c151062f32c9db8 ("sh-pfc: Add support for SoC-specific initialization")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sh-pfc: r8a7791: Add missing HSCIF1 pinmux data

commit da7a692fbbab07f4e9798b5b52798f6e3256dd8f upstream.

The R8A7791 PFC driver  was apparently based on the preliminary revisions
of  the  user's manual, which  omitted the HSCIF1 group E signals in  the
IPSR4 register description. This would cause HSCIF1's probe  to fail with
the messages like below:

sh-pfc e6060000.pfc: cannot locate data/mark enum_id for mark 1989
sh-sci e62c8000.serial: Error applying setting, reverse things back
sh-sci: probe of e62c8000.serial failed with error -22

Add the neceassary PINMUX_IPSR_MSEL() invocations for the HSCK1_E,
HCTS1#_E, and HRTS1#_E signals...

Fixes: 508845196238 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: mxs: atomically switch mux and drive strength config

commit da6c2addf66d7ff7d0b090d6267d4292f951e4e6 upstream.

To set the mux mode of a pin two bits must be set. Up to now this is
implemented using the following idiom:

writel(mask, reg + CLR);
writel(value, reg + SET);

. This however results in the mux mode being 0 between the two writes.

On my machine there is an IC's reset pin connected to LCD_D20. The
bootloader configures this pin as GPIO output-high (i.e. not holding the
IC in reset). When Linux reconfigures the pin to GPIO the short time
LCD_D20 is muxed as LCD_D20 instead of GPIO_1_20 is enough to confuse
the connected IC.

The same problem is present for the pin's drive strength setting which is
reset to low drive strength before using the right value.

So instead of relying on the hardware to modify the register setting
using two writes implement the bit toggling using read-modify-write.

Fixes: 17723111e64f ("pinctrl: add pinctrl-mxs support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: cherryview: Add terminate entry for dmi_system_id tables

commit a9de080bbcd5c4e213a3d7bbb1e314d60980e943 upstream.

Make sure dmi_system_id tables are NULL terminated.

Fixes: 703650278372 ("pinctrl: cherryview: Add a quirk to make Acer
Chromebook keyboard work again")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sunxi: Fix SPDIF function name for A83T

commit 7903d4f5e1dec53963cba9b1bc472a76a3532e07 upstream.

We use well known standard names for functions that have name, such as
I2C, SPI, SPDIF, etc..

Fix the function name of SPDIF, which was named OWA (One Wire Audio)
based on Allwinner datasheets.

Fixes: 4730f33f0d82 ("pinctrl: sunxi: add allwinner A83T PIO controller
      support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: stm32: Fix bad function call

commit b7c747d4627462f25b3daabf49c18895a6722faa upstream.

In stm32_pconf_parse_conf function, stm32_pmx_gpio_set_direction is
called with wrong parameter value. Indeed, using NULL value for range
will raise an oops.

Fixes: aceb16dc2da5 ("pinctrl: Add STM32 MCUs support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: meson: meson8b: fix the NAND DQS pins

commit 97ba26b8a9343008504d4e3a87d212bc07b05212 upstream.

The nand_groups table uses different names for the NAND DQS pins than
the GROUP() definition in meson8b_cbus_groups (nand_dqs_0 vs nand_dqs0).
This prevents using the NAND DQS pins in the devicetree.

Fix this by ensuring that the GROUP() definition and the
meson8b_cbus_groups use the same name for these pins.

Fixes: 0fefcb6876d0 ("pinctrl: Add support for Meson8b")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sh-pfc: r8a7795: Fix hscif2_clk_b and hscif4_ctrl

commit 4324b6084f45b9faebda8d6563d8625d22b4b5df upstream.

Fix typos in hscif2_clk_b_mux[] and hscif4_ctrl_mux[].

Fixes: a56069c46c102710 ("pinctrl: sh-pfc: r8a7795: Add HSCIF pins, groups, and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sh-pfc: r8a7791: Add missing DVC_MUTE signal

commit 3908632fb829d73317c64c3d04f584b49f62e4ae upstream.

The R8A7791 PFC driver  was apparently based on the preliminary revisions
of  the user's  manual, which  omitted the DVC_MUTE signal  altogether in
the PFC section. The modern manual has the signal described,  so just add
the necassary data to the driver...

Fixes: 508845196238 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sh-pfc: r8a7791: Fix SCIF2 pinmux data

commit 58439280f84e6b39fd7d61f25ab30489c1aaf0a9 upstream.

PINMUX_IPSR_MSEL() macro invocation for the TX2 signal has apparently wrong
1st argument -- most probably a result of cut&paste programming...

Fixes: 508845196238 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sh-pfc: r8a7794: Swap ATA signals

commit 5f4c8cafe1148f8a91287072815df8f0b66f0e5c upstream.

All R8A7794 manuals I have here (0.50 and 1.10) agree that the PFC driver
has ATAG0# and ATAWR0# signals in IPSR12 swapped -- fix this.

Fixes: 43c4436e2f18 ("pinctrl: sh-pfc: add R8A7794 PFC support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again

commit 7036502783729c2aaf7a3c24c89087c58721430f upstream.

After commit 47c950d10202 ("pinctrl: cherryview: Do not add all
southwest and north GPIOs to IRQ domain") the driver does not add all
GPIOs to the irqdomain. The reason for that is that those GPIOs cannot
generate IRQs at all, only GPEs (General Purpose Events). This causes
Linux virtual IRQ numbering to change.

However, it seems some CYAN Chromebooks, including Acer Chromebook
hardcodes these Linux IRQ numbers in the ACPI tables of the machine.
Since the numbering is different now, the IRQ meant for keyboard does
not match the Linux virtual IRQ number anymore making the keyboard
non-functional.

Work this around by adding special quirk just for these machines where
we add back all GPIOs to the irqdomain. Rest of the Cherryview/Braswell
based machines will not be affected by the change.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945
Fixes: 47c950d10202 ("pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain")
Reported-by: Adam S Levy <theadamlevy@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: qcom: ipq4019: add missing pingroups for pins > 70

commit d7402de48efae57bbb0072e53d3800c30de57ea5 upstream.

This patch adds the missing PINGROUP for GPIO70-99.
This fixes a crash that happens in pinctrl-msm, if any
of the GPIO70-99 are accessed.

Fixes: 5303f7827fcd41d ("pinctrl: qcom: ipq4019: set ngpios to correct value")
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec

commit 425fffd886bae3d127a08fa6a17f2e31e24ed7ff upstream.

Currently, inputting the following command will succeed but actually the
value will be truncated:

  # echo 0x12ffffffff > /proc/sys/net/ipv4/tcp_notsent_lowat

This is not friendly to the user, so instead, we should report error
when the value is larger than UINT_MAX.

Fixes: e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysctl: don't print negative flag for proc_douintvec

commit 5380e5644afbba9e3d229c36771134976f05c91e upstream.

I saw some very confusing sysctl output on my system:
  # cat /proc/sys/net/core/xfrm_aevent_rseqth
  -2
  # cat /proc/sys/net/core/xfrm_aevent_etime
  -10
  # cat /proc/sys/net/ipv4/tcp_notsent_lowat
  -4294967295

Because we forget to set the *negp flag in proc_douintvec, so it will
become a garbage value.

Since the value related to proc_douintvec is always an unsigned integer,
so we can set *negp to false explictily to fix this issue.

Fixes: e7d316a02f68 ("sysctl: handle error writing UINT_MAX to u32 fields")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211_hwsim: Replace bogus hrtimer clockid

commit 8fbcfeb8a9cc803464d6c166e7991913711c612c upstream.

mac80211_hwsim initializes a hrtimer with clockid
CLOCK_MONOTONIC_RAW. That's not supported.

Use CLOCK_MONOTONIC instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: fix device node leak

commit e271b2c909a22a2c13b2d5f77f2ce0091b74540c upstream.

Make sure to release any OF device-node reference taken when creating
the USB device.

Note that we currently do not hold a reference to the root hub
device-tree node (i.e. the parent controller node).

Fixes: 69bec7259853 ("USB: core: let USB device know device node")
Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: Fix typo in the definition of Endpoint[out]Request

commit 7cf916bd639bd26db7214f2205bccdb4b9306256 upstream.

The current definition is wrong. This breaks my upcoming
Aspeed virtual hub driver.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: usbip: set buffer pointers to NULL after free

commit b3b51417d0af63fb9a06662dc292200aed9ea53f upstream.

The usbip stack dynamically allocates the transfer_buffer and
setup_packet of each urb that got generated by the tcp to usb stub code.
As these pointers are always used only once we will set them to NULL
after use. This is done likewise to the free_urb code in vudc_dev.c.
This patch fixes double kfree situations where the usbip remote side
added the URB_FREE_BUFFER.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add USB quirk for HVR-950q to avoid intermittent device resets

commit 6836796de4019944f4ba4c99a360e8250fd2e735 upstream.

The USB core and sysfs will attempt to enumerate certain parameters
which are unsupported by the au0828 - causing inconsistent behavior
and sometimes causing the chip to reset.  Avoid making these calls.

This problem manifested as intermittent cases where the au8522 would
be reset on analog video startup, in particular when starting up ALSA
audio streaming in parallel - the sysfs entries created by
snd-usb-audio on streaming startup would result in unsupported control
messages being sent during tuning which would put the chip into an
unknown state.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick

commit fd90f73a9925f248d696bde1cfc836d9fda5570d upstream.

Added the USB serial device ID for the CEL ZigBee EM3588
radio stick.

Signed-off-by: Jeremie Rapin <rapinj@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: replace %p with %pK

commit 04fb365c453e14ff9e8a28f1c46050d920a27a4a upstream.

%p will leak kernel pointers, so let's not expose the information on
dmesg and instead use %pK. %pK will only show the actual addresses if
explicitly enabled under /proc/sys/kernel/kptr_restrict.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/virtio: don't leak bo on drm_gem_object_init failure

commit 385aee965b4e4c36551c362a334378d2985b722a upstream.

Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406155941.458-1-kraxel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: entity: Fix stream count check

commit 41387a59c8fd55975c6a26cc12fc5c9ca61fcc0f upstream.

There's a sanity check for the stream count remaining positive or zero on
error path, but instead of performing the check on the traversed entity it
is performed on the entity where traversal ends. Fix this.

Fixes: commit 3801bc7d1b8d ("[media] media: Media Controller fix to not let stream_count go negative")

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/kprobes: Allow to create probe with a module name starting with a digit

commit 9e52b32567126fe146f198971364f68d3bc5233f upstream.

Always try to parse an address, since kstrtoul() will safely fail when
given a symbol as input. If that fails (which will be the case for a
symbol), try to parse a symbol instead.

This allows creating a probe such as:

    p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0

Which is necessary for this command to work:

    perf probe -m 8021q -a vlan_gro_receive

Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net
Fixes: 413d37d1e ("tracing: Add kprobe-based event tracer")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: choose readdir frag based on previous readdir reply

commit b50c2de51e611da90cf3cf04c058f7e9bbe79e93 upstream.

The dirfragtree is lazily updated, it's not always accurate. Infinite
loops happens in following circumstance.

- client send request to read frag A
- frag A has been fragmented into frag B and C. So mds fills the reply
  with contents of frag B
- client wants to read next frag C. ceph_choose_frag(frag value of C)
  return frag A.

The fix is using previous readdir reply to calculate next readdir frag
when possible.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: platform: fix race condition with driver_override

commit 6265539776a0810b7ce6398c27866ddb9c6bd154 upstream.

The driver_override implementation is susceptible to race condition when
different threads are reading vs storing a different driver override.
Add locking to avoid race condition.

Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Salido <salidoa@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: completely ignore unknown open flags

commit 629e014bb8349fcf7c1e4df19a842652ece1c945 upstream.

Currently we just stash anything we got into file->f_flags, and the
report it in fcntl(F_GETFD).  This patch just clears out all unknown
flags so that we don't pass them to the fs or report them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: add a VALID_OPEN_FLAGS

commit 80f18379a7c350c011d30332658aa15fe49a8fa5 upstream.

Add a central define for all valid open flags, and use it in the uniqueness
check.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.36

KVM: nVMX: Fix exception injection

commit d4912215d1031e4fb3d1038d2e1857218dba0d0a upstream.

 WARNING: CPU: 3 PID: 2840 at arch/x86/kvm/vmx.c:10966 nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel]
 CPU: 3 PID: 2840 Comm: qemu-system-x86 Tainted: G           OE   4.12.0-rc3+ #23
 RIP: 0010:nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel]
 Call Trace:
  ? kvm_check_async_pf_completion+0xef/0x120 [kvm]
  ? rcu_read_lock_sched_held+0x79/0x80
  vmx_queue_exception+0x104/0x160 [kvm_intel]
  ? vmx_queue_exception+0x104/0x160 [kvm_intel]
  kvm_arch_vcpu_ioctl_run+0x1171/0x1ce0 [kvm]
  ? kvm_arch_vcpu_load+0x47/0x240 [kvm]
  ? kvm_arch_vcpu_load+0x62/0x240 [kvm]
  kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
  ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm]
  ? __fget+0xf3/0x210
  do_vfs_ioctl+0xa4/0x700
  ? __fget+0x114/0x210
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x81/0x220
  entry_SYSCALL64_slow_path+0x25/0x25

This is triggered occasionally by running both win7 and win2016 in L2, in
addition, EPT is disabled on both L1 and L2. It can't be reproduced easily.

Commit 0b6ac343fc (KVM: nVMX: Correct handling of exception injection) mentioned
that "KVM wants to inject page-faults which it got to the guest. This function
assumes it is called with the exit reason in vmcs02 being a #PF exception".
Commit e011c663 (KVM: nVMX: Check all exceptions for intercept during delivery to
L2) allows to check all exceptions for intercept during delivery to L2. However,
there is no guarantee the exit reason is exception currently, when there is an
external interrupt occurred on host, maybe a time interrupt for host which should
not be injected to guest, and somewhere queues an exception, then the function
nested_vmx_check_exception() will be called and the vmexit emulation codes will
try to emulate the "Acknowledge interrupt on exit" behavior, the warning is
triggered.

Reusing the exit reason from the L2->L0 vmexit is wrong in this case,
the reason must always be EXCEPTION_NMI when injecting an exception into
L1 as a nested vmexit.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Fixes: e011c663b9c7 ("KVM: nVMX: Check all exceptions for intercept during delivery to L2")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: zero base3 of unusable segments

commit f0367ee1d64d27fa08be2407df5c125442e885e3 upstream.

Static checker noticed that base3 could be used uninitialized if the
segment was not present (useable).  Random stack values probably would
not pass VMCS entry checks.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 1aa366163b8b ("KVM: x86 emulator: consolidate segment accessors")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/vPMU: fix undefined shift in intel_pmu_refresh()

commit 34b0dadbdf698f9b277a31b2747b625b9a75ea1f upstream.

Static analysis noticed that pmu->nr_arch_gp_counters can be 32
(INTEL_PMC_MAX_GENERIC) and therefore cannot be used to shift 'int'.

I didn't add BUILD_BUG_ON for it as we have a better checker.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 25462f7f5295 ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: fix emulation of RSM and IRET instructions

commit 6ed071f051e12cf7baa1b69d3becb8f232fdfb7b upstream.

On AMD, the effect of set_nmi_mask called by emulate_iret_real and em_rsm
on hflags is reverted later on in x86_emulate_instruction where hflags are
overwritten with ctxt->emul_flags (the kvm_set_hflags call). This manifests
as a hang when rebooting Windows VMs with QEMU, OVMF, and >1 vcpu.

Instead of trying to merge ctxt->emul_flags into vcpu->arch.hflags after
an instruction is emulated, this commit deletes emul_flags altogether and
makes the emulator access vcpu->arch.hflags using two new accessors. This
way all changes, on the emulator side as well as in functions called from
the emulator and accessing vcpu state with emul_to_vcpu, are preserved.

More details on the bug and its manifestation with Windows and OVMF:

  It's a KVM bug in the interaction between SMI/SMM and NMI, specific to AMD.
  I believe that the SMM part explains why we started seeing this only with
  OVMF.

  KVM masks and unmasks NMI when entering and leaving SMM. When KVM emulates
  the RSM instruction in em_rsm, the set_nmi_mask call doesn't stick because
  later on in x86_emulate_instruction we overwrite arch.hflags with
  ctxt->emul_flags, effectively reverting the effect of the set_nmi_mask call.
  The AMD-specific hflag of interest here is HF_NMI_MASK.

  When rebooting the system, Windows sends an NMI IPI to all but the current
  cpu to shut them down. Only after all of them are parked in HLT will the
  initiating cpu finish the restart. If NMI is masked, other cpus never get
  the memo and the initiating cpu spins forever, waiting for
  hal!HalpInterruptProcessorsStarted to drop. That's the symptom we observe.

Fixes: a584539b24b8 ("KVM: x86: pass the whole hflags field to emulator and back")
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: fix NULL dereference in have_cpu_die()

commit 335d2c2d192266358c5dfa64953a4c162f46e464 upstream.

Commit 5c492c3f5255 ("arm64: smp: Add function to determine if cpus are
stuck in the kernel") added a helper function to determine if die() is
supported in cpu_ops. This function assumes a cpu will have a valid
cpu_ops entry, but that may not be the case for cpu0 is spin-table or
parking protocol is used to boot secondary cpus. In that case, there
is a NULL dereference if have_cpu_die() is called by cpu0. So add a
check for a valid cpu_ops before dereferencing it.

Fixes: 5c492c3f5255 ("arm64: smp: Add function to determine if cpus are stuck in the kernel")
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program

commit 9d2ee0a60b8bd9bef2a0082c533736d6a7b39873 upstream.

On brcmnand controller v6.x and v7.x, the #WP pin is controlled through
the NAND_WP bit in CS_SELECT register.

The driver currently assumes that toggling the #WP pin is
instantaneously enabling/disabling write-protection, but it actually
takes some time to propagate the new state to the internal NAND chip
logic. This behavior is sometime causing data corruptions when an
erase/program operation is executed before write-protection has really
been disabled.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: brcmstb: Fix START and STOP conditions

commit 2de3ec4f1d4ba6ee380478055104eb918bd50cce upstream.

The BSC data buffers to send and receive data are each of size 32 bytes
or 8 bytes 'xfersz' depending on SoC. The problem observed for all the
combined message transfer was if length of data transfer was a multiple
of 'xfersz' a repeated START was being transmitted by BSC driver. Fixed
this by appropriately setting START/STOP conditions for such transfers.

Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: avoid writing channel out of allocated array

commit 77c0d0cd10e793989d1e8b835a9a09694182cb39 upstream.

Our code was assigning number of channels to the index variable by
default. If firmware reported channel we didn't predict this would
result in using that initial index value and writing out of array. This
never happened so far (we got a complete list of supported channels) but
it means possible memory corruption so we should handle it anyway.

This patch simply detects unexpected channel and ignores it.

As we don't try to create new entry now, it's also safe to drop hw_value
and center_freq assignment. For known channels we have these set anyway.

I decided to fix this issue by assigning NULL or a target channel to the
channel variable. This was one of possible ways, I prefefred this one as
it also avoids using channel[index] over and over.

Fixes: 58de92d2f95e ("brcmfmac: use static superset of channels for wiphy bands")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

infiniband: hns: avoid gcc-7.0.1 warning for uninitialized data

commit 5b0ff9a00755d4d9c209033a77f1ed8f3186fe5c upstream.

hns_roce_v1_cq_set_ci() calls roce_set_bit() on an uninitialized field,
which will then change only a few of its bits, causing a warning with
the latest gcc:

infiniband/hw/hns/hns_roce_hw_v1.c: In function 'hns_roce_v1_cq_set_ci':
infiniband/hw/hns/hns_roce_hw_v1.c:1854:23: error: 'doorbell[1]' is used uninitialized in this function [-Werror=uninitialized]
  roce_set_bit(doorbell[1], ROCEE_DB_OTHERS_H_ROCEE_DB_OTH_HW_SYNS_S, 1);

The code is actually correct since we always set all bits of the
port_vlan field, but gcc correctly points out that the first
access does contain uninitialized data.

This initializes the field to zero first before setting the
individual bits.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Fix another GCC jump table detection issue

commit 5c51f4ae84df0f9df33ac08aa5be50061a8b4242 upstream.

Arnd Bergmann reported a (false positive) objtool warning:

  drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0xfe: sibling call from callable instruction with changed frame pointer

The issue is in find_switch_table().  It tries to find a switch
statement's jump table by walking backwards from an indirect jump
instruction, looking for a relocation to the .rodata section.  In this
case it stopped walking prematurely: the first .rodata relocation it
encountered was for a variable (resp_state_name) instead of a jump
table, so it just assumed there wasn't a jump table.

The fix is to ignore any .rodata relocation which refers to an ELF
object symbol.  This works because the jump tables are anonymous and
have no symbols associated with them.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection")
Link: http://lkml.kernel.org/r/20170302225723.3ndbsnl4hkqbne7a@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: scpi: don't add cpufreq device if the scpi dvfs node is disabled

commit 67bcc2c5f1da8c5bb58e72354274ea5c59a3950a upstream.

Currently we add the virtual cpufreq device unconditionally even when
the SCPI DVFS clock provider node is disabled. This will cause cpufreq
driver to throw errors when it gets initailised on boot/modprobe and
also when the CPUs are hot-plugged back in.

This patch fixes the issue by adding the virtual cpufreq device only if
the SCPI DVFS clock provider is available and registered.

Fixes: 9490f01e2471 ("clk: scpi: add support for cpufreq virtual device")
Reported-by: Michał Zegan <webczat_200@poczta.onet.pl>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Michał Zegan <webczat_200@poczta.onet.pl>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: s3c2416: double free on driver init error path

commit a69261e4470d680185a15f748d9cdafb37c57a33 upstream.

The "goto err_armclk;" error path already does a clk_put(s3c_freq->hclk);
so this is a double free.

Fixes: 34ee55075265 ([CPUFREQ] Add S3C2416/S3C2450 cpufreq driver)
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Fix interrupt remapping when disable guest_mode

commit 84a21dbdef0b96d773599c33c2afbb002198d303 upstream.

Pass-through devices to VM guest can get updated IRQ affinity
information via irq_set_affinity() when not running in guest mode.
Currently, AMD IOMMU driver in GA mode ignores the updated information
if the pass-through device is setup to use vAPIC regardless of guest_mode.
This could cause invalid interrupt remapping.

Also, the guest_mode bit should be set and cleared only when
SVM updates posted-interrupt interrupt remapping information.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Fixes: d98de49a53e48 ('iommu/amd: Enable vAPIC interrupt remapping mode by default')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid()

commit 73dbd4a4230216b6a5540a362edceae0c9b4876b upstream.

In function amd_iommu_bind_pasid(), the control flow jumps
to label out_free when pasid_state->mm and mm is NULL. And
mmput(mm) is called.  In function mmput(mm), mm is
referenced without validation. This will result in a NULL
dereference bug. This patch fixes the bug.

Signed-off-by: Pan Bian <bianpan2016@163.com>
Fixes: f0aac63b873b ('iommu/amd: Don't hold a reference to mm_struct')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/dma: Don't reserve PCI I/O windows

commit 938f1bbe35e3a7cb07e1fa7c512e2ef8bb866bdf upstream.

Even if a host controller's CPU-side MMIO windows into PCI I/O space do
happen to leak into PCI memory space such that it might treat them as
peer addresses, trying to reserve the corresponding I/O space addresses
doesn't do anything to help solve that problem. Stop doing a silly thing.

Fixes: fade1ec055dc ("iommu/dma: Avoid PCI host bridge windows")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu: Handle default domain attach failure

commit 797a8b4d768c58caac58ee3e8cb36a164d1b7751 upstream.

We wouldn't normally expect ops->attach_dev() to fail, but on IOMMUs
with limited hardware resources, or generally misconfigured systems,
it is certainly possible. We report failure correctly from the external
iommu_attach_device() interface, but do not do so in iommu_group_add()
when attaching to the default domain. The result of failure there is
that the device, group and domain all get left in a broken,
part-configured state which leads to weird errors and misbehaviour down
the line when IOMMU API calls sort-of-but-don't-quite work.

Check the return value of __iommu_attach_device() on the default domain,
and refactor the error handling paths to cope with its failure and clean
up correctly in such cases.

Fixes: e39cb8a3aa98 ("iommu: Make sure a device is always attached to a domain")
Reported-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/vt-d: Don't over-free page table directories

commit f7116e115acdd74bc75a4daf6492b11d43505125 upstream.

dma_pte_free_level() recurses down the IOMMU page tables and frees
directory pages that are entirely contained in the given PFN range.
Unfortunately, it incorrectly calculates the starting address covered
by the PTE under consideration, which can lead to it clearing an entry
that is still in use.

This occurs if we have a scatterlist with an entry that has a length
greater than 1026 MB and is aligned to 2 MB for both the IOMMU and
physical addresses. For example, if __domain_mapping() is asked to map a
two-entry scatterlist with 2 MB and 1028 MB segments to PFN 0xffff80000,
it will ask if dma_pte_free_pagetable() is asked to PFNs from
0xffff80200 to 0xffffc05ff, it will also incorrectly clear the PFNs from
0xffff80000 to 0xffff801ff because of this issue. The current code will
set level_pfn to 0xffff80200, and 0xffff80200-0xffffc01ff fits inside
the range being cleared. Properly setting the level_pfn for the current
level under consideration catches that this PTE is outside of the range
being cleared.

This patch also changes the value passed into dma_pte_free_level() when
it recurses. This only affects the first PTE of the range being cleared,
and is handled by the existing code that ensures we start our cursor no
lower than start_pfn.

This was found when using dma_map_sg() to map large chunks of contiguous
memory, which immediatedly led to faults on the first access of the
erroneously-deleted mappings.

Fixes: 3269ee0bd668 ("intel-iommu: Fix leaks in pagetable freeing")
Reviewed-by: Benjamin Serebrin <serebrin@google.com>
Signed-off-by: David Dillow <dillow@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: o2hb: revert hb threshold to keep compatible

commit 33496c3c3d7b88dcbe5e55aa01288b05646c6aca upstream.

Configfs is the interface for ocfs2-tools to set configure to kernel and
$configfs_dir/cluster/$clustername/heartbeat/dead_threshold is the one
used to configure heartbeat dead threshold.  Kernel has a default value
of it but user can set O2CB_HEARTBEAT_THRESHOLD in /etc/sysconfig/o2cb
to override it.

Commit 45b997737a80 ("ocfs2/cluster: use per-attribute show and store
methods") changed heartbeat dead threshold name while ocfs2-tools did
not, so ocfs2-tools won't set this configurable and the default value is
always used.  So revert it.

Fixes: 45b997737a80 ("ocfs2/cluster: use per-attribute show and store methods")
Link: http://lkml.kernel.org/r/1490665245-15374-1-git-send-email-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Fix flush_tlb_page() on Xen

commit dbd68d8e84c606673ebbcf15862f8c155fa92326 upstream.

flush_tlb_page() passes a bogus range to flush_tlb_others() and
expects the latter to fix it up.  native_flush_tlb_others() has the
fixup but Xen's version doesn't.  Move the fixup to
flush_tlb_others().

AFAICS the only real effect is that, without this fix, Xen would
flush everything instead of just the one page on remote vCPUs in
when flush_tlb_page() was called.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: e7b52ffd45a6 ("x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range")
Link: http://lkml.kernel.org/r/10ed0e4dfea64daef10b87fb85df1746999b4dba.1492844372.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space

commit 5ed386ec09a5d75bcf073967e55e895c2607a5c3 upstream.

When this function fails it just sends a SIGSEGV signal to
user-space using force_sig(). This signal is missing
essential information about the cause, e.g. the trap_nr or
an error code.

Fix this by propagating the error to the only caller of
mpx_handle_bd_fault(), do_bounds(), which sends the correct
SIGSEGV signal to the process.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: fe3d197f84319 ('x86, mpx: On-demand kernel allocation of bounds tables')
Link: http://lkml.kernel.org/r/1491488362-27198-1-git-send-email-joro@8bytes.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot/KASLR: Fix kexec crash due to 'virt_addr' calculation bug

commit 8eabf42ae5237e6b699aeac687b5b629e3537c8d upstream.

Kernel text KASLR is separated into physical address and virtual
address randomization. And for virtual address randomization, we
only randomiza to get an offset between 16M and KERNEL_IMAGE_SIZE.
So the initial value of 'virt_addr' should be LOAD_PHYSICAL_ADDR,
but not the original kernel loading address 'output'.

The bug will cause kernel boot failure if kernel is loaded at a different
position than the address, 16M, which is decided at compiled time.
Kexec/kdump is such practical case.

To fix it, just assign LOAD_PHYSICAL_ADDR to virt_addr as initial
value.

Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 8391c73 ("x86/KASLR: Randomize virtual address separately")
Link: http://lkml.kernel.org/r/1498567146-11990-3-git-send-email-bhe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools arch: Sync arch/x86/lib/memcpy_64.S with the kernel

commit e883d09c9eb2ffddfd057c17e6a0cef446ec8c9b upstream.

Just a minor fix done in:

  Fixes: 26a37ab319a2 ("x86/mce: Fix copy/paste error in exception table entries")

Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/n/tip-ni9jzdd5yxlail6pq8cuexw2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8685/1: ensure memblock-limit is pmd-aligned

commit 9e25ebfe56ece7541cd10a20d715cbdd148a2e06 upstream.

The pmd containing memblock_limit is cleared by prepare_page_table()
which creates the opportunity for early_alloc() to allocate unmapped
memory if memblock_limit is not pmd aligned causing a boot-time hang.

Commit 965278dcb8ab ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM")
attempted to resolve this problem, but there is a path through the
adjust_lowmem_bounds() routine where if all memory regions start and
end on pmd-aligned addresses the memblock_limit will be set to
arm_lowmem_limit.

Since arm_lowmem_limit can be affected by the vmalloc early parameter,
the value of arm_lowmem_limit may not be pmd-aligned. This commit
corrects this oversight such that memblock_limit is always rounded
down to pmd-alignment.

Fixes: 965278dcb8ab ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM64/ACPI: Fix BAD_MADT_GICC_ENTRY() macro implementation

commit cb7cf772d83d2d4e6995c5bb9e0fb59aea8f7080 upstream.

The BAD_MADT_GICC_ENTRY() macro checks if a GICC MADT entry passes
muster from an ACPI specification standpoint. Current macro detects the
MADT GICC entry length through ACPI firmware version (it changed from 76
to 80 bytes in the transition from ACPI 5.1 to ACPI 6.0 specification)
but always uses (erroneously) the ACPICA (latest) struct (ie struct
acpi_madt_generic_interrupt - that is 80-bytes long) length to check if
the current GICC entry memory record exceeds the MADT table end in
memory as defined by the MADT table header itself, which may result in
false negatives depending on the ACPI firmware version and how the MADT
entries are laid out in memory (ie on ACPI 5.1 firmware MADT GICC
entries are 76 bytes long, so by adding 80 to a GICC entry start address
in memory the resulting address may well be past the actual MADT end,
triggering a false negative).

Fix the BAD_MADT_GICC_ENTRY() macro by reshuffling the condition checks
and update them to always use the firmware version specific MADT GICC
entry length in order to carry out boundary checks.

Fixes: b6cfb277378e ("ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro")
Reported-by: Julien Grall <julien.grall@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Al Stone <ahs3@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: OMAP3: Fix MFG ID EEPROM

commit 06e1a5cc570703796ff1bd3a712e8e3b15c6bb0d upstream.

The manufacturing information is stored in the EEPROM.  This chip
is an AT24C64 not not (nor has it ever been) 24C02.  This patch will
correctly address the EEPROM to read the entire contents and not just
256 bytes (of 0xff).

Fixes: 5e3447a29a38 ("ARM: dts: LogicPD Torpedo: Add AT24 EEPROM Support")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer

commit 04abaf07f6d5cdf22b7a478a86e706dfeeeef960 upstream.

Starting from commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM
states at probe error and driver unbind") pm_runtime core now changes
device runtime_status back to after RPM_SUSPENDED after a probe defer.
Certain OMAP devices make use of "ti,no-idle-on-init" flag which causes
omap_device_enable to be called during the BUS_NOTIFY_ADD_DEVICE event
during probe, along with pm_runtime_set_active.

This call to pm_runtime_set_active typically will prevent a call to
pm_runtime_get in a driver probe function from re-enabling the
omap_device. However, in the case of a probe defer that happens before
the driver probe function is able to run, such as a missing pinctrl
states defer, pm_runtime_reinit will set the device as RPM_SUSPENDED and
then once driver probe is actually able to run, pm_runtime_get will see
the device as suspended and call through to the omap_device layer,
attempting to enable the already enabled omap_device and causing errors
like this:

omap-gpmc 50000000.gpmc: omap_device: omap_device_enable() called from
invalid state 1
omap-gpmc 50000000.gpmc: use pm_runtime_put_sync_suspend() in driver?

We can avoid this error by making sure the pm_runtime status of a device
matches the omap_device state before a probe attempt. By extending the
omap_device bus notifier to act on the BUS_NOTIFY_BIND_DRIVER event we
can check if a device is enabled in omap_device but with a pm_runtime
status of RPM_SUSPENDED and once again mark the device as RPM_ACTIVE to
avoid a second incorrect call to omap_device_enable.

Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe
error and driver unbind")
Tested-by: Franklin S Cooper Jr. <fcooper@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: tps65086: Fix DT node referencing in of_parse_cb

commit 6308f1787fb85bc98b7241a08a9f7f33b47f8b61 upstream.

When we check for additional DT properties in the current node we
use the device_node passed in with the configuration data, this
will not point to the correct DT node, use the one passed in
for this purpose.

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: tps65086: Fix expected switch DT node names

commit 1c47f7c316de38c30b481e1886cc6352c9efdcc1 upstream.

The three load switches are called SWA1, SWB1, and SWB2. The
node names describing properties for these are expected to be
the same, but due to a typo they are not. Fix this here.

Fixes: d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Reported-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Steven Kipisz <s-kipisz2@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: fix device-node leaks

commit 8324147f38019865b29d03baf28412d2ec0bd828 upstream.

Make sure to release the device-node reference taken in
of_register_spi_device() on errors and when deregistering the device.

Fixes: 284b01897340 ("spi: Add OF binding support for SPI busses")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: When no dma_chan map buffers with spi_master's parent

commit 88b0aa544af58ce3be125a1845a227264ec9ab89 upstream.

Back before commit 1dccb598df54 ("arm64: simplify dma_get_ops"), for
arm64, devices for which dma_ops were not explicitly set were automatically
configured to use swiotlb_dma_ops, since this was hard-coded as the
global "dma_ops" in arm64_dma_init().

Now that global "dma_ops" has been removed, all devices much have their
dma_ops explicitly set by a call to arch_setup_dma_ops(), otherwise the
device is assigned dummy_dma_ops, and thus calls to map_sg for such a
device will fail (return 0).

Mediatek SPI uses DMA but does not use a dma channel.  Support for this
was added by commit c37f45b5f1cd ("spi: support spi without dma channel
to use can_dma()"), which uses the master_spi dev to DMA map buffers.

The master_spi device is not a platform device, rather it is created
in spi_alloc_device(), and therefore its dma_ops are never set.

Therefore, when the mediatek SPI driver when it does DMA (for large SPI
transactions > 32 bytes), SPI will use spi_map_buf()->dma_map_sg() to
map the buffer for use in DMA.  But dma_map_sg()->dma_map_sg_attrs() returns
0, because ops->map_sg is dummy_dma_ops->__dummy_map_sg, and hence
spi_map_buf() returns -ENOMEM (-12).

Fix this by using the real spi_master's parent device which should be a
real physical device with DMA properties.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Fixes: c37f45b5f1cd ("spi: support spi without dma channel to use can_dma()")
Cc: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/loadavg: Avoid loadavg spikes caused by delayed NO_HZ accounting

commit 6e5f32f7a43f45ee55c401c0b9585eb01f9629a8 upstream.

If we crossed a sample window while in NO_HZ we will add LOAD_FREQ to
the pending sample window time on exit, setting the next update not
one window into the future, but two.

This situation on exiting NO_HZ is described by:

  this_rq->calc_load_update < jiffies < calc_load_update

In this scenario, what we should be doing is:

  this_rq->calc_load_update = calc_load_update      [ next window ]

But what we actually do is:

  this_rq->calc_load_update = calc_load_update + LOAD_FREQ   [ next+1 window ]

This has the effect of delaying load average updates for potentially
up to ~9seconds.

This can result in huge spikes in the load average values due to
per-cpu uninterruptible task counts being out of sync when accumulated
across all CPUs.

It's safe to update the per-cpu active count if we wake between sample
windows because any load that we left in 'calc_load_idle' will have
been zero'd when the idle load was folded in calc_global_load().

This issue is easy to reproduce before,

  commit 9d89c257dfb9 ("sched/fair: Rewrite runnable load and utilization average tracking")

just by forking short-lived process pipelines built from ps(1) and
grep(1) in a loop. I'm unable to reproduce the spikes after that
commit, but the bug still seems to be present from code review.

Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: commit 5167e8d ("sched/nohz: Rewrite and fix load-avg computation -- again")
Link: http://lkml.kernel.org/r/20170217120731.11868-2-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: bcm281xx: Fix use of uninitialized spinlock.

commit fedf266f9955d9a019643cde199a2fd9a0259f6f upstream.

The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so
initialize it earlier.  Fixes a warning at boot with lock debugging
enabled.

Fixes: 6adb730dc208 ("watchdog: bcm281xx: Watchdog Driver")
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: use skb_to_full_sk in ip_route_me_harder

commit 29e09229d9f26129a39462fae0ddabc4d9533989 upstream.

inet_sk(skb->sk) is illegal in case skb is attached to request socket.

Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Reported by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: Oops on error in pfkey_msg2xfrm_state()

commit 1e3d0c2c70cd3edb5deed186c5f5c75f2b84a633 upstream.

There are some missing error codes here so we accidentally return NULL
instead of an error pointer.  It results in a NULL pointer dereference.

Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: NULL dereference on allocation failure

commit e747f64336fc15e1c823344942923195b800aa1e upstream.

The default error code in pfkey_msg2xfrm_state() is -ENOBUFS.  We
added a new call to security_xfrm_state_alloc() which sets "err" to zero
so there several places where we can return ERR_PTR(0) if kmalloc()
fails.  The caller is expecting error pointers so it leads to a NULL
dereference.

Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>