staging: rtl8192e: Make RT_TRACE use consistent

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Make functions static

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Delete dead code

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove externs, redundant comments

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove USB related code

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: rtl8192e: Remove useless usermode callback

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: added locks in wl_mac80211.c

Increasing robustness of the code, although no problem has been reported
in the field. Several code paths were unshielded for multi thread access.
Several lock acquisitions have been added to wl_mac80211.c

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed locks around Mac80211 calls

A spinlock was acquired prior to calling the Mac80211 functions
ieee80211_wake_queues() and ieee80211_stop_queues() and Cfg80211 functions
wiphy_rfkill_set_hw_state() and wiphy_rfkill_start_polling().
This is not required and could even lead to instability. Therefore the locks
were removed.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: cosmetic changes

Code cleanup. Added lock related comments to wl_mac80211.c. Also removed a
redundant function definition.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove some bsscfg attribute that are redundant

In the struct wlc_bsscfg a couple of attribute were held under a
preprocessor definition, but these are not needed in the mac80211
driver context.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: allow changing channel by mac80211 when associated

When associated on 5G the driver receives a probe request for 2G with
a 2G rate specified. The driver asserts as the operating band is still
5G when the probe request packet is given. Root cause was that ioctl
function did fail upon setting the channel as requested by mac80211
when we are associated.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove the rest of broadcom specific byte swapping routines

- move ltoh16_buf/htol16_buf util/bcmsrom.c
- replace ltoh16_buf in brcmsmac/wlc_mac80211.c with several
  le16_to_cpu's

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace htod/dtoh broadcom defines

htod32 -> cpu_to_le32
htod16 -> cpu_to_le16
dtoh32 -> le32_to_cpu
dtoh16 -> le16_to_cpu

For brcmfmac/dhd_common.c just removed defines.

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unused broadcom byte swapping macroses

- BCMSWAP32
- bcmswap32
- BCMSWAP32BY16
- bcmswap32by16

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace broadcom specific unaligned byte swapping routines

htol16_ua_store -> put_unaligned_le16
htol32_ua_store -> put_unaligned_le32
hton16_ua_store -> put_unaligned_be16
hton32_ua_store -> put_unaligned_be32
ltoh16_ua -> get_unaligned_le16
ltoh32_ua -> get_unaligned_le32
ntoh16_ua -> get_unaligned_be16
ntoh32_ua -> get_unaligned_be32

removed unused:
- load32_ua
- load16_ua
- store32_ua
- store16_ua
- ltoh_ua
- ntoh_au

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace broadcom specific byte swapping routines

HTON16/hton16 -> cpu_to_be16 (htons for networking code)
HTON32/hton32 -> cpu_to_be32 (htonl for networking code)
NTOH16/ntoh32 -> be16_to_cpu (ntohs for networking code)
NTOH32/ntoh32 -> be32_to_cpu (ntohl for networking code)
LTOH16/ltoh16 -> le16_to_cpu
LTOH32/ltoh32 -> le32_to_cpu
HTOL16/htol16 -> cpu_to_le16
HTOL32/htol32 -> cpu_to_le32

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bugfix for crash on heavy transmit traffic

With heavy transmit traffic, once in a while (range 15mins-1hr)
a tx packet was added to a full transmit queue. Under certain
conditions an other packet in the queue gets bumped to make room
for the new packet. This is not considered an error condition, but
normal operation. Despite that, there was an ASSERT(0) that caused
the driver to oops. The ASSERT(0) has been removed. Driver was tested
afterwards.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: Allow sharing xvmalloc for zram and zcache

Both zram and zcache use xvmalloc allocator. If xvmalloc
is compiled separately for both of them, we will get linker
error if they are both selected as "built-in". We can also
get linker error regarding missing xvmalloc symbols if zram
is not built.

So, we now compile xvmalloc separately and export its symbols
which are then used by both of zram and zcache.

Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Eliminate cfg80211 warnings

Cancel the pending scan operation once the interface is going down to
avoid warnings from the cfg80211 module. Once the interface is down,
cfg80211 checks for any pending scan requests and dumps a warning if it
finds one. It expects the driver to abort any ongoing scan operation
once the driver detects that the interface is going down.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: buffer overflow in SEND_FRAME ioctl

We should check that optTxFrmCmd.optIEDataLen isn't too large before we
copy it into the data buffer.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vipin Mehta <vipin.mehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: cleanup in SEND_FRAME ioctl

The original code was written in a funny way where every statement was
part of else if blocks.  I broke them up into separate statements by
adding breaks on failure conditions.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Vipin Mehta <vipin.mehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: update TODO file / maintainers

This updates the TODO file to reflect new changes on development.

Cc: Joe Perches <joe@perches.com>
Cc: Naveen Singh <nsingh@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: gma500: fix up trailing whitespace errors

Lots of little ones all through the driver, mostly
all in a cut-and-paste header comment.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: gma500: remove psb_gfx.mod.c

The mod.c file should not be part of the repo.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: gma500: Intel GMA500 staging driver

This is an initial staging driver for the GMA500. It's been stripped out
of the PVR drivers and crunched together from various bits of code and
different kernels.

Currently it's unaccelerated but still pretty snappy even compositing with
the frame buffer X server.

Lots of work is needed to rework the ttm and bo interfaces from being
ripped out and then 2D acceleration wants putting back for framebuffer and
somehow eventually via DRM.

There is no support for the parts without open source userspace (video
accelerators, 3D) as per kernel policy.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

connector: Convert char *name to const char *name

Allow more const declarations.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Fix the WARN_ON condition in free_net_device()

In a previous commit, 7a09876d, ASSERT was changed to WARN_ON, but
the condition wasn't updated. This patch fixed this error.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Remove unnecessary ASSERTs in netvsc_initialize()

These fields have been assigned in netvsc_drv_init() before calling
netvsc_initialize(), so there is no need to check them.
The ASSERTs were already commented out, and this patch removes
them.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "select"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "memory"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "management"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "initiali[zs]e"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "implementation"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "function"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "failed"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "consistent"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "adjust"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "address"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging/trivial: fix typos concerning "access"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing disappearing of scan list due to jiffies wrap over

When jiffies wrap-over, all the BSS in the cache is removed. Wrap-over of
jiffies is not handled in the correct way. This cause the scan list to go
empty during this time for a small duration

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing accidental overwriting of probed ssid list in the hardware

Fixing the code to avoid overwriting of the first index in the probed ssid
list maintained by the hardware. This index is used to store broadcast SSID.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Adding state in driver to track the sme state

Adding state in driver to track the sme state. The connect/disconnect
events from the driver were messing up the state maintained within the
cfg80211 module.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing the cached copy of the BSS filter set by user

Fixing the cached copy of the BSS filter set by user.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing memory leak

The patch fixes a mismatch in the allocation and free of scatter HIF bus
requests in the suspend/resume path.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Add configuration for excessive TX retry threshold

Adding host side interface to configure the excessive TX retry threshold.
It is used by the target to determine disconnection triggers. Additionally,
some definitions have been added to header file wmi.h to bridge the gap
for the newly added command.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing a memory leak

Fix for a memory leak discovered during suspend/resume testing.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing a memory leak

Virtual Scatter Gather Lists not getting freed during the HTCStop(). The
patch adds some clean up code in the code path.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Adding support for txop bursting enable/disable

Adding compile time support for enabling/disabling txop bursting.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Consolidating hardware configuration

Move all the wmi configuration commands done after wmi_ready to a single
function.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing driver initialization for manufacturing mode

Fixing the driver initialization for manufacturing mode that involves
downloading a firmware binary meant for RF tests on the factory floor.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing target crash due to mismatch connect/disconnect

Firmware design requires a WMI_DISCONNECT_CMD for every WMI_CONNECT_CMD to
clear the firmware previous profile state. There is one case in linux host
driver where two WMI_CONNECT_CMD are given without a WMI_DISCONNECT_CMD.
This causes firmware state to mismatch causing an ASSERT. Use the driver
state variable arConnectPending to track whether a WMI_CONNECT_CMD is
issued to firmware.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Return correct scan complete status

Return correct scan complete status to the cfg80211 module based on
the value returned from the hardware.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing key settings for WPA/WPA2

A bug was observed during the reconnection phase in the WPA/WPA2-PSK scenario
where the EAPOL frames were going encrypted during an auto reconnection
attempt. The initial 4-way handshake would go fine but then the driver
was getting a command to set default keys sometime later. Setting of an
incorrect flag (TX_USAGE) in the hadrware was causing the EAPOL frames during
the subsequent 4-way handshake attempts to go encrypted causing the AP to
reject the station.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: ath6kl: Fixing a NULL pointer exception

The driver was dereferencing a NULL pointer because of the device instance
being registered via the set_wiphy_dev() function. The function
ar6000_avail_ev() was passing the argument as NULL instead of using the one
returned by the MMC stack through the probe callback.

Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: zram: initialize device on first read

Currently the device is initialized when first write is done to the
device. Any read attempt before the first write would fail, including
"hidden" read the user may not know about (as for example if he tries
to write a partial block).

This patch initializes the device on first request, whether read or
write.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: zcache: fix memory leak

obj is not freed if __get_free_page() failed.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro:adis16130 stub removal and cleanup

Get rid of unused stubs for trigger and buffer support.
Fix line length issues.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro:adis16080 unused stub removal and cleanup

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:gyro:adis16060 cleanup and dead code removal

Removed stubs related to buffering and triggering. Put them back
when they are actually needed.
Fixed line length issues.
Made a number of functions static as no longer in header.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:meter remove stubs from ade7854.

General cleanup and use of standard functions to simplfy some spi reads
as well.

Also added a device id table to the spi version.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:meter remove stubs from ade7759.

General cleanup and use of standard functions to simplfy some spi reads
as well.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:meter remove stubs from ade7754.

General cleanup and use of standard functions to simplfy some spi reads
as well.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:meter remove stubs from ade7753.

General cleanup and use of standard functions to simplfy some spi reads
as well.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: buffer example - add lots more runtime parameters

Add ability to control delay for event free buffers
Add ability to control length of buffer
Add ability to control how many read cycles occur

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio: update example to handle case with no ring events

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:lis3l02dq allow buffer implementation selection

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:kfifo buffer implementation

A very simple use of a kfifo as an alternative for the ring_sw

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging:iio:buffering move the copy to user on rip down into implementations

The current interface is not as adaptable as it should be. Moving
this complexity into the implementations makes it easier to add
new implementations.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: iio: ak8975: add platform data.

As some of the platform not support irq_to_gpio, we pass gpio port
by platform data.

Signed-off-by: Tony SIM <chinyeow.sim.xt@renesas.com>
Signed-off-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: msm: Use explicit GPLv2 licenses

Replace a BSD-style license in Code Aurora Forum authored files with
an explicit GPLv2.

Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Bcmchar: Fix some checkpatch errors

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Bcmchar: Fix style issues on bcm_char_read()

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Bcmchar: Fix style issues on bcm_char_release()

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: bcm: Bcmchar: Fix style issues on bcm_char_open()

Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Fixed FIXME comments by using list_for_each_entry

Fixed FIXME requests in channel_mgmt.c by using
list_for_each_entry.

Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: K.Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Remove dead code from rndis_filter.c

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: hv: Remove dead code from netvsc.c

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Cleanup vmalloc calls

The subject says it all. There is no need to
specify different page protection bits based
on the architecture.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Remove osd layer

The OSD layer was a wrapper around native interfaces
adding little value and was infact buggy -
refer to the osd_wait.patch for details.
This patch gets rid of the OSD abstraction.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Use native wait primitives

In preperation for getting rid of the osd layer; change
the code to use native wait interfaces. As part of this,
fixed the buggy implementation in the osd_wait_primitive
where the condition was cleared potentially after the
condition was signalled.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: hv: Use native page allocation/free functions

In preperation for getting rid of the osd.[ch] files;
change all page allocation/free functions to use native interfaces.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: improved checks on incompatible firmware

The return status of wl_ucode_init_buf() is now being used. Also a bug in
firmware validation, which could lead to incompatible firmware not being
rejected by the driver, has been fixed. Comment from Dan Carpenter on using
negative error values has been incorporated in this commit.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bugfix for stack dump on firmware load problems

If there is a problem with the firmware load (eg, firmware not present in
/lib/firmware/brcm), then the driver would dump its stack instead of bailing
out gracefully. Root cause was an uninitialized variable (wl->pub) being
dereferenced in the rfkill portion of a cleanup routine (wl_remove). Fix was
to move the rfkill calls into the correct spot in wl_remove().

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: bugfix for oops on firmware load problems

Upon firmware load failure, wl_release_fw() was called multiple
times. This caused the driver to oops. Solution was to remove redundant
wl_release_fw() calls.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: replace bcopy with memcpy

Use native linux memcpy instead of legacy bcopy

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: use %zu instead of %d for size_t

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed unused code because of mac rev cleanup

Code cleanup. Removed more defines, data structures and functions that were
unused because this driver supports mac core rev 22 and up. Got rid of redundant
brackets in wlc_bmac_txstatus() by moving locally defined variables above {}
scope.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removed obsolete comments

Code cleanup. Only mac core revisions 22 and higher are supported, therefore
comment related to older mac revisions was removed.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: removal of inactive d11 code

Code cleanup. Removed code that was never invoked because the mac core
revision supported is always higher than 22.

Signed-off-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove declaration of unused string array

The constant array declaration aci_names is not referenced
anywhere in the code so it has been removed.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove #ifdef BCMDBG from regular functions

Under error condition debug functions are being called which
only have implementation when BCMDBG is defined. This result
in #ifdef BCMDBG blocks in functions. This patch fixes this by
mapping the debug functions to empty macro when BCMDBG is not
defined. This makes the calling function easier to read.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove warning introduced by rfkill implementation

During rfkill implementation the content of wlc_radio_upd function
was removed for testing purposes only. This ended up in the patch
sent out. This commit restores the function content, which was the
only function calling static function wlc_radio_enable. This removes
the compilation warning observed.

Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: remove unnecessary cast in wlc_d11hdrs_mac80211

memset prototype specifies a void pointer as buffer. Conversion from
any pointer type to void pointer does not require an explicit cast.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: store BSSID in driver config information

When mac80211 informs about new BSSID this was configured toward
the hardware device, but the information is also needed inside
the driver itself. This  patch takes care of that.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: set beacon interval as provided by mac80211

Driver now follows beacon interval as set by mac80211 callback.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: store HT operation mode settings from mac80211

The HT operation mode is provided by mac80211 and they are now
stored in the driver.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: handle change in association state from mac80211

The driver has flags for association state which are now being set
according to notification from mac80211.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: cleanup mac80211 callback bss_info_changed

The implementation for bss_info_changed was not handling all
changes as provided by mac80211 module. These have been added
and will log message with changed parameters.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: enable driver counter functionality

The 802.11 core in the chipsets provides counters that are now
used to provide counter values to mac80211 through get_stats
callback. Counters related to ampdu and wmm (aka. wme) are not
yet incorporated.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: brcm80211: fix potential null pointer access handling ucode buffer

Allocation of buffer in function wl_ucode_init_buf can fail. This was
signalled by an error message, but code continued to access the null
pointer. This is now avoided by jumping to failure label.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Brett Rudley <brudley@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>