powerpc/pseries: correctly track irq state in default idle

[ Upstream commit 92c94dfb69e350471473fd3075c74bc68150879e ]

prep_irq_for_idle() is intended to be called before entering
H_CEDE (and it is used by the pseries cpuidle driver). However the
default pseries idle routine does not call it, leading to mismanaged
lazy irq state when the cpuidle driver isn't in use. Manifestations of
this include:

* Dropped IPIs in the time immediately after a cpu comes
  online (before it has installed the cpuidle handler), making the
  online operation block indefinitely waiting for the new cpu to
  respond.

* Hitting this WARN_ON in arch_local_irq_restore():
/*
 * We should already be hard disabled here. We had bugs
 * where that wasn't the case so let's dbl check it and
 * warn if we are wrong. Only do that when IRQ tracing
 * is enabled as mfmsr() can be costly.
 */
if (WARN_ON_ONCE(mfmsr() & MSR_EE))
__hard_irq_disable();

Call prep_irq_for_idle() from pseries_lpar_idle() and honor its
result.

Fixes: 363edbe2614a ("powerpc: Default arch idle could cede processor on pseries")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s/exception: machine check use correct cfar for late handler

[ Upstream commit 0b66370c61fcf5fcc1d6901013e110284da6e2bb ]

Bare metal machine checks run an "early" handler in real mode before
running the main handler which reports the event.

The main handler runs exactly as a normal interrupt handler, after the
"windup" which sets registers back as they were at interrupt entry.
CFAR does not get restored by the windup code, so that will be wrong
when the handler is run.

Restore the CFAR to the saved value before running the late handler.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802105709.27696-8-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/si: fix ASIC tests

[ Upstream commit 77efe48a729588527afb4d5811b9e0acb29f5e51 ]

Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio_pci: Restore original state on release

[ Upstream commit 92c8026854c25093946e0d7fe536fd9eac440f06 ]

vfio_pci_enable() saves the device's initial configuration information
with the intent that it is restored in vfio_pci_disable().  However,
the commit referenced in Fixes: below replaced the call to
__pci_reset_function_locked(), which is not wrapped in a state save
and restore, with pci_try_reset_function(), which overwrites the
restored device state with the current state before applying it to the
device.  Reinstate use of __pci_reset_function_locked() to return to
the desired behavior.

Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
Signed-off-by: hexin <hexin15@baidu.com>
Signed-off-by: Liu Qi <liuqi16@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: tegra: Fix write barrier placement in pmx_writel

[ Upstream commit c2cf351eba2ff6002ce8eb178452219d2521e38e ]

pmx_writel uses writel which inserts write barrier before the
register write.

This patch has fix to replace writel with writel_relaxed followed
by a readback and memory barrier to ensure write operation is
completed for successful pinctrl change.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/mobility: use cond_resched when updating device tree

[ Upstream commit ccfb5bd71d3d1228090a8633800ae7cdf42a94ac ]

After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.

There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/futex: Fix warning: 'oldval' may be used uninitialized in this function

[ Upstream commit 38a0d0cdb46d3f91534e5b9839ec2d67be14c59d ]

We see warnings such as:
  kernel/futex.c: In function 'do_futex':
  kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
     return oldval == cmparg;
                   ^
  kernel/futex.c:1651:6: note: 'oldval' was declared here
    int oldval, ret;
        ^

This is because arch_futex_atomic_op_inuser() only sets *oval if ret
is 0 and GCC doesn't see that it will only use it when ret is 0.

Anyway, the non-zero ret path is an error path that won't suffer from
setting *oval, and as *oval is a local var in futex_atomic_op_inuser()
it will have no impact.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: reword change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86b72f0c134367b214910b27b9a6dd3321af93bb.1565774657.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/rtas: use device model APIs and serialization during LPM

[ Upstream commit a6717c01ddc259f6f73364779df058e2c67309f8 ]

The LPAR migration implementation and userspace-initiated cpu hotplug
can interleave their executions like so:

1. Set cpu 7 offline via sysfs.

2. Begin a partition migration, whose implementation requires the OS
   to ensure all present cpus are online; cpu 7 is onlined:

     rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up

   This sets cpu 7 online in all respects except for the cpu's
   corresponding struct device; dev->offline remains true.

3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is
   already online and returns success. The driver core (device_online)
   sets dev->offline = false.

4. The migration completes and restores cpu 7 to offline state:

     rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down

This leaves cpu7 in a state where the driver core considers the cpu
device online, but in all other respects it is offline and
unused. Attempts to online the cpu via sysfs appear to succeed but the
driver core actually does not pass the request to the lower-level
cpuhp support code. This makes the cpu unusable until the cpu device
is manually set offline and then online again via sysfs.

Instead of directly calling cpu_up/cpu_down, the migration code should
use the higher-level device core APIs to maintain consistent state and
serialize operations.

Fixes: 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-2-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sirf: Don't reference clk_init_data after registration

[ Upstream commit af55dadfbce35b4f4c6247244ce3e44b2e242b84 ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Guo Zeng <Guo.Zeng@csr.com>
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-6-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qoriq: Fix -Wunused-const-variable

[ Upstream commit a95fb581b144b5e73da382eaedb2e32027610597 ]

drivers/clk/clk-qoriq.c:138:38: warning: unused variable
'p5020_cmux_grp1' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp1

drivers/clk/clk-qoriq.c:146:38: warning: unused variable
'p5020_cmux_grp2' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp2

In the definition of the p5020 chip, the p2041 chip's info was used
instead.  The p5020 and p2041 chips have different info. This is most
likely a typo.

Link: https://github.com/ClangBuiltLinux/linux/issues/525
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lkml.kernel.org/r/20190627220642.78575-1-nhuck@google.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi_si: Only schedule continuously in the thread in maintenance mode

[ Upstream commit 340ff31ab00bca5c15915e70ad9ada3030c98cf8 ]

ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.

This was originally added so firmware updates through IPMI would
complete in a timely manner.  But we can't kill the scheduler
locks for that one use case.

Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: drm: radeon: Fix a possible null-pointer dereference in radeon_connector_set_property()

[ Upstream commit f3eb9b8f67bc28783eddc142ad805ebdc53d6339 ]

In radeon_connector_set_property(), there is an if statement on line 743
to check whether connector->encoder is NULL:
    if (connector->encoder)

When connector->encoder is NULL, it is used on line 755:
    if (connector->encoder->crtc)

Thus, a possible null-pointer dereference may occur.

To fix this bug, connector->encoder is checked before being used.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: Fix EEH during kexec

[ Upstream commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6 ]

During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.

Signed-off-by: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: ssd1307fb: Start page range at page_offset

[ Upstream commit dd9782834dd9dde3624ff1acea8859f3d3e792d4 ]

The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.

Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: Increase AUX transfer length limit

[ Upstream commit e0655feaec62d5139b6b13a7b1bbb1ab8f1c2d83 ]

According to the datasheet tc358767 can transfer up to 16 bytes via
its AUX channel, so the artificial limit of 8 appears to be too
low. However only up to 15-bytes seem to be actually supported and
trying to use 16-byte transfers results in transfers failing
sporadically (with bogus status in case of I2C transfers), so limit it
to 15.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-9-andrew.smirnov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.9.195

Btrfs: fix race setting up and completing qgroup rescan workers

[ Upstream commit 13fc1d271a2e3ab8a02071e711add01fab9271f6 ]

There is a race between setting up a qgroup rescan worker and completing
a qgroup rescan worker that can lead to callers of the qgroup rescan wait
ioctl to either not wait for the rescan worker to complete or to hang
forever due to missing wake ups. The following diagram shows a sequence
of steps that illustrates the race.

        CPU 1                                                         CPU 2                                  CPU 3

 btrfs_ioctl_quota_rescan()
  btrfs_qgroup_rescan()
   qgroup_rescan_init()
    mutex_lock(&fs_info->qgroup_rescan_lock)
    spin_lock(&fs_info->qgroup_lock)

    fs_info->qgroup_flags |=
      BTRFS_QGROUP_STATUS_FLAG_RESCAN

    init_completion(
      &fs_info->qgroup_rescan_completion)

    fs_info->qgroup_rescan_running = true

    mutex_unlock(&fs_info->qgroup_rescan_lock)
    spin_unlock(&fs_info->qgroup_lock)

    btrfs_init_work()
     --> starts the worker

                                                        btrfs_qgroup_rescan_worker()
                                                         mutex_lock(&fs_info->qgroup_rescan_lock)

                                                         fs_info->qgroup_flags &=
                                                           ~BTRFS_QGROUP_STATUS_FLAG_RESCAN

                                                         mutex_unlock(&fs_info->qgroup_rescan_lock)

                                                         starts transaction, updates qgroup status
                                                         item, etc

                                                                                                           btrfs_ioctl_quota_rescan()
                                                                                                            btrfs_qgroup_rescan()
                                                                                                             qgroup_rescan_init()
                                                                                                              mutex_lock(&fs_info->qgroup_rescan_lock)
                                                                                                              spin_lock(&fs_info->qgroup_lock)

                                                                                                              fs_info->qgroup_flags |=
                                                                                                                BTRFS_QGROUP_STATUS_FLAG_RESCAN

                                                                                                              init_completion(
                                                                                                                &fs_info->qgroup_rescan_completion)

                                                                                                              fs_info->qgroup_rescan_running = true

                                                                                                              mutex_unlock(&fs_info->qgroup_rescan_lock)
                                                                                                              spin_unlock(&fs_info->qgroup_lock)

                                                                                                              btrfs_init_work()
                                                                                                               --> starts another worker

                                                         mutex_lock(&fs_info->qgroup_rescan_lock)

                                                         fs_info->qgroup_rescan_running = false

                                                         mutex_unlock(&fs_info->qgroup_rescan_lock)

 complete_all(&fs_info->qgroup_rescan_completion)

Before the rescan worker started by the task at CPU 3 completes, if
another task calls btrfs_ioctl_quota_rescan(), it will get -EINPROGRESS
because the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN is set at
fs_info->qgroup_flags, which is expected and correct behaviour.

However if other task calls btrfs_ioctl_quota_rescan_wait() before the
rescan worker started by the task at CPU 3 completes, it will return
immediately without waiting for the new rescan worker to complete,
because fs_info->qgroup_rescan_running is set to false by CPU 2.

This race is making test case btrfs/171 (from fstests) to fail often:

  btrfs/171 9s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad)
#      --- tests/btrfs/171.out     2018-09-16 21:30:48.505104287 +0100
#      +++ /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad      2019-09-19 02:01:36.938486039 +0100
#      @@ -1,2 +1,3 @@
#       QA output created by 171
#      +ERROR: quota rescan failed: Operation now in progress
#       Silence is golden
#      ...
#      (Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/171.out /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad'  to see the entire diff)

That is because the test calls the btrfs-progs commands "qgroup quota
rescan -w", "qgroup assign" and "qgroup remove" in a sequence that makes
calls to the rescan start ioctl fail with -EINPROGRESS (note the "btrfs"
commands 'qgroup assign' and 'qgroup remove' often call the rescan start
ioctl after calling the qgroup assign ioctl,
btrfs_ioctl_qgroup_assign()), since previous waits didn't actually wait
for a rescan worker to complete.

Another problem the race can cause is missing wake ups for waiters,
since the call to complete_all() happens outside a critical section and
after clearing the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN. In the sequence
diagram above, if we have a waiter for the first rescan task (executed
by CPU 2), then fs_info->qgroup_rescan_completion.wait is not empty, and
if after the rescan worker clears BTRFS_QGROUP_STATUS_FLAG_RESCAN and
before it calls complete_all() against
fs_info->qgroup_rescan_completion, the task at CPU 3 calls
init_completion() against fs_info->qgroup_rescan_completion which
re-initilizes its wait queue to an empty queue, therefore causing the
rescan worker at CPU 2 to call complete_all() against an empty queue,
never waking up the task waiting for that rescan worker.

Fix this by clearing BTRFS_QGROUP_STATUS_FLAG_RESCAN and setting
fs_info->qgroup_rescan_running to false in the same critical section,
delimited by the mutex fs_info->qgroup_rescan_lock, as well as doing the
call to complete_all() in that same critical section. This gives the
protection needed to avoid rescan wait ioctl callers not waiting for a
running rescan worker and the lost wake ups problem, since setting that
rescan flag and boolean as well as initializing the wait queue is done
already in a critical section delimited by that mutex (at
qgroup_rescan_init()).

Fixes: 57254b6ebce4ce ("Btrfs: add ioctl to wait for qgroup rescan completion")
Fixes: d2c609b834d62f ("btrfs: properly track when rescan worker is running")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: qgroup: Drop quota_root and fs_info parameters from update_qgroup_status_item

[ Upstream commit 2e980acdd829742966c6a7e565ef3382c0717295 ]

They can be fetched from the transaction handle.

Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

CIFS: Fix oplock handling for SMB 2.1+ protocols

commit a016e2794fc3a245a91946038dd8f34d65e53cc3 upstream.

There may be situations when a server negotiates SMB 2.1
protocol version or higher but responds to a CREATE request
with an oplock rather than a lease.

Currently the client doesn't handle such a case correctly:
when another CREATE comes in the server sends an oplock
break to the initial CREATE and the client doesn't send
an ack back due to a wrong caching level being set (READ
instead of RWH). Missing an oplock break ack makes the
server wait until the break times out which dramatically
increases the latency of the second CREATE.

Fix this by properly detecting oplocks when using SMB 2.1
protocol version and higher.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: fix max ea value size

commit 63d37fb4ce5ae7bf1e58f906d1bf25f036fe79b2 upstream.

It should not be larger then the slab max buf size. If user
specifies a larger size, it passes this check and goes
straightly to SMB2_set_info_init performing an insecure memcpy.

Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: riic: Clear NACK in tend isr

commit a71e2ac1f32097fbb2beab098687a7a95c84543e upstream.

The NACKF flag should be cleared in INTRIICNAKI interrupt processing as
description in HW manual.

This issue shows up quickly when PREEMPT_RT is applied and a device is
probed that is not plugged in (like a touchscreen controller). The result
is endless interrupts that halt system boot.

Fixes: 310c18a41450 ("i2c: riic: add driver")
Cc: stable@vger.kernel.org
Reported-by: Chien Nguyen <chien.nguyen.eb@rvc.renesas.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwrng: core - don't wait on add_early_randomness()

commit 78887832e76541f77169a24ac238fccb51059b63 upstream.

add_early_randomness() is called by hwrng_register() when the
hardware is added. If this hardware and its module are present
at boot, and if there is no data available the boot hangs until
data are available and can't be interrupted.

For instance, in the case of virtio-rng, in some cases the host can be
not able to provide enough entropy for all the guests.

We can have two easy ways to reproduce the problem but they rely on
misconfiguration of the hypervisor or the egd daemon:

- if virtio-rng device is configured to connect to the egd daemon of the
host but when the virtio-rng driver asks for data the daemon is not
connected,

- if virtio-rng device is configured to connect to the egd daemon of the
host but the egd daemon doesn't provide data.

The guest kernel will hang at boot until the virtio-rng driver provides
enough data.

To avoid that, call rng_get_data() in non-blocking mode (wait=0)
from add_early_randomness().

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Fixes: d9e797261933 ("hwrng: add randomness to system from rng...")
Cc: <stable@vger.kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

quota: fix wrong condition in is_quota_modification()

commit 6565c182094f69e4ffdece337d395eb7ec760efc upstream.

Quoted from
commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize")

" At LSF we decided that if we truncate up from isize we shouldn't trim
  fallocated blocks that were fallocated with KEEP_SIZE and are past the
 new i_size.  This patch fixes ext4 to do this. "

And generic/092 of fstest have covered this case for long time, however
is_quota_modification() didn't adjust based on that rule, so that in
below condition, we will lose to quota block change:
- fallocate blocks beyond EOF
- remount
- truncate(file_path, file_size)

Fix it.

Link: https://lore.kernel.org/r/20190911093650.35329-1-yuchao0@huawei.com
Fixes: 3da40c7b0898 ("ext4: only call ext4_truncate when size <= isize")
CC: stable@vger.kernel.org
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix punch hole for inline_data file systems

commit c1e8220bd316d8ae8e524df39534b8a412a45d5e upstream.

If a program attempts to punch a hole on an inline data file, we need
to convert it to a normal file first.

This was detected using ext4/032 using the adv configuration.  Simple
reproducer:

mke2fs -Fq -t ext4 -O inline_data /dev/vdc
mount /vdc
echo "" > /vdc/testfile
xfs_io -c 'truncate 33554432' /vdc/testfile
xfs_io -c 'fpunch 0 1048576' /vdc/testfile
umount /vdc
e2fsck -fy /dev/vdc

Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix warning inside ext4_convert_unwritten_extents_endio

commit e3d550c2c4f2f3dba469bc3c4b83d9332b4e99e1 upstream.

Really enable warning when CONFIG_EXT4_DEBUG is set and fix missing
first argument.  This was introduced in commit ff95ec22cd7f ("ext4:
add warning to ext4_convert_unwritten_extents_endio") and splitting
extents inside endio would trigger it.

Fixes: ff95ec22cd7f ("ext4: add warning to ext4_convert_unwritten_extents_endio")
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

/dev/mem: Bail out upon SIGKILL.

commit 8619e5bdeee8b2c685d686281f2d2a6017c4bc15 upstream.

syzbot found that a thread can stall for minutes inside read_mem() or
write_mem() after that thread was killed by SIGKILL [1]. Reading from
iomem areas of /dev/mem can be slow, depending on the hardware.
While reading 2GB at one read() is legal, delaying termination of killed
thread for minutes is bad. Thus, allow reading/writing /dev/mem and
/dev/kmem to be preemptible and killable.

  [ 1335.912419][T20577] read_mem: sz=4096 count=2134565632
  [ 1335.943194][T20577] read_mem: sz=4096 count=2134561536
  [ 1335.978280][T20577] read_mem: sz=4096 count=2134557440
  [ 1336.011147][T20577] read_mem: sz=4096 count=2134553344
  [ 1336.041897][T20577] read_mem: sz=4096 count=2134549248

Theoretically, reading/writing /dev/mem and /dev/kmem can become
"interruptible". But this patch chose "killable". Future patch will make
them "interruptible" so that we can revert to "killable" if some program
regressed.

[1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/1566825205-10703-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: Purge frame registrations on iftype change

commit c1d3ad84eae35414b6b334790048406bd6301b12 upstream.

Currently frame registrations are not purged, even when changing the
interface type.  This can lead to potentially weird situations where
frames possibly not allowed on a given interface type remain registered
due to the type switching happening after registration.

The kernel currently relies on userspace apps to actually purge the
registrations themselves, this is not something that the kernel should
rely on.

Add a call to cfg80211_mlme_purge_registrations() to forcefully remove
any registrations left over prior to switching the iftype.

Cc: stable@vger.kernel.org
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Link: https://lore.kernel.org/r/20190828211110.15005-1-denkenz@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid6: Set R5_ReadError when there is read failure on parity disk

commit 143f6e733b73051cd22dcb80951c6c929da413ce upstream.

7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in
RAID6.") avoids rereading P when it can be computed from other members.
However, this misses the chance to re-write the right data to P. This
patch sets R5_ReadError if the re-read fails.

Also, when re-read is skipped, we also missed the chance to reset
rdev->read_errors to 0. It can fail the disk when there are many read
errors on P member disk (other disks don't have read error)

V2: upper layer read request don't read parity/Q data. So there is no
need to consider such situation.

This is Reported-by: kbuild test robot <lkp@intel.com>

Fixes: 7471fb77ce4d ("md/raid6: Fix anomily when recovering a single device in RAID6.")
Cc: <stable@vger.kernel.org> #4.4+
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Relinquish CPUs in btrfs_compare_trees

commit 6af112b11a4bc1b560f60a618ac9c1dcefe9836e upstream.

When doing any form of incremental send the parent and the child trees
need to be compared via btrfs_compare_trees. This  can result in long
loop chains without ever relinquishing the CPU. This causes softlockup
detector to trigger when comparing trees with a lot of items. Example
report:

watchdog: BUG: soft lockup - CPU#0 stuck for 24s! [snapperd:16153]
CPU: 0 PID: 16153 Comm: snapperd Not tainted 5.2.9-1-default #1 openSUSE Tumbleweed (unreleased)
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : __ll_sc_arch_atomic_sub_return+0x14/0x20
lr : btrfs_release_extent_buffer_pages+0xe0/0x1e8 [btrfs]
sp : ffff00001273b7e0
Call trace:
 __ll_sc_arch_atomic_sub_return+0x14/0x20
 release_extent_buffer+0xdc/0x120 [btrfs]
 free_extent_buffer.part.0+0xb0/0x118 [btrfs]
 free_extent_buffer+0x24/0x30 [btrfs]
 btrfs_release_path+0x4c/0xa0 [btrfs]
 btrfs_free_path.part.0+0x20/0x40 [btrfs]
 btrfs_free_path+0x24/0x30 [btrfs]
 get_inode_info+0xa8/0xf8 [btrfs]
 finish_inode_if_needed+0xe0/0x6d8 [btrfs]
 changed_cb+0x9c/0x410 [btrfs]
 btrfs_compare_trees+0x284/0x648 [btrfs]
 send_subvol+0x33c/0x520 [btrfs]
 btrfs_ioctl_send+0x8a0/0xaf0 [btrfs]
 btrfs_ioctl+0x199c/0x2288 [btrfs]
 do_vfs_ioctl+0x4b0/0x820
 ksys_ioctl+0x84/0xb8
 __arm64_sys_ioctl+0x28/0x38
 el0_svc_common.constprop.0+0x7c/0x188
 el0_svc_handler+0x34/0x90
 el0_svc+0x8/0xc

Fix this by adding a call to cond_resched at the beginning of the main
loop in btrfs_compare_trees.

Fixes: 7069830a9e38 ("Btrfs: add btrfs_compare_trees function")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix use-after-free when using the tree modification log

commit efad8a853ad2057f96664328a0d327a05ce39c76 upstream.

At ctree.c:get_old_root(), we are accessing a root's header owner field
after we have freed the respective extent buffer. This results in an
use-after-free that can lead to crashes, and when CONFIG_DEBUG_PAGEALLOC
is set, results in a stack trace like the following:

  [ 3876.799331] stack segment: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
  [ 3876.799363] CPU: 0 PID: 15436 Comm: pool Not tainted 5.3.0-rc3-btrfs-next-54 #1
  [ 3876.799385] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  [ 3876.799433] RIP: 0010:btrfs_search_old_slot+0x652/0xd80 [btrfs]
  (...)
  [ 3876.799502] RSP: 0018:ffff9f08c1a2f9f0 EFLAGS: 00010286
  [ 3876.799518] RAX: ffff8dd300000000 RBX: ffff8dd85a7a9348 RCX: 000000038da26000
  [ 3876.799538] RDX: 0000000000000000 RSI: ffffe522ce368980 RDI: 0000000000000246
  [ 3876.799559] RBP: dae1922adadad000 R08: 0000000008020000 R09: ffffe522c0000000
  [ 3876.799579] R10: ffff8dd57fd788c8 R11: 000000007511b030 R12: ffff8dd781ddc000
  [ 3876.799599] R13: ffff8dd9e6240578 R14: ffff8dd6896f7a88 R15: ffff8dd688cf90b8
  [ 3876.799620] FS:  00007f23ddd97700(0000) GS:ffff8dda20200000(0000) knlGS:0000000000000000
  [ 3876.799643] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 3876.799660] CR2: 00007f23d4024000 CR3: 0000000710bb0005 CR4: 00000000003606f0
  [ 3876.799682] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [ 3876.799703] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [ 3876.799723] Call Trace:
  [ 3876.799735]  ? do_raw_spin_unlock+0x49/0xc0
  [ 3876.799749]  ? _raw_spin_unlock+0x24/0x30
  [ 3876.799779]  resolve_indirect_refs+0x1eb/0xc80 [btrfs]
  [ 3876.799810]  find_parent_nodes+0x38d/0x1180 [btrfs]
  [ 3876.799841]  btrfs_check_shared+0x11a/0x1d0 [btrfs]
  [ 3876.799870]  ? extent_fiemap+0x598/0x6e0 [btrfs]
  [ 3876.799895]  extent_fiemap+0x598/0x6e0 [btrfs]
  [ 3876.799913]  do_vfs_ioctl+0x45a/0x700
  [ 3876.799926]  ksys_ioctl+0x70/0x80
  [ 3876.799938]  ? trace_hardirqs_off_thunk+0x1a/0x20
  [ 3876.799953]  __x64_sys_ioctl+0x16/0x20
  [ 3876.799965]  do_syscall_64+0x62/0x220
  [ 3876.799977]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [ 3876.799993] RIP: 0033:0x7f23e0013dd7
  (...)
  [ 3876.800056] RSP: 002b:00007f23ddd96ca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [ 3876.800078] RAX: ffffffffffffffda RBX: 00007f23d80210f8 RCX: 00007f23e0013dd7
  [ 3876.800099] RDX: 00007f23d80210f8 RSI: 00000000c020660b RDI: 0000000000000003
  [ 3876.800626] RBP: 000055fa2a2a2440 R08: 0000000000000000 R09: 00007f23ddd96d7c
  [ 3876.801143] R10: 00007f23d8022000 R11: 0000000000000246 R12: 00007f23ddd96d80
  [ 3876.801662] R13: 00007f23ddd96d78 R14: 00007f23d80210f0 R15: 00007f23ddd96d80
  (...)
  [ 3876.805107] ---[ end trace e53161e179ef04f9 ]---

Fix that by saving the root's header owner field into a local variable
before freeing the root's extent buffer, and then use that local variable
when needed.

Fixes: 30b0463a9394d9 ("Btrfs: fix accessing the root pointer in tree mod log functions")
CC: stable@vger.kernel.org # 3.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: filter of trusted xattr results in audit

commit 5c2e9f346b815841f9bed6029ebcb06415caf640 upstream.

When filtering xattr list for reading, presence of trusted xattr
results in a security audit log.  However, if there is other content
no errno will be set, and if there isn't, the errno will be -ENODATA
and not -EPERM as is usually associated with a lack of capability.
The check does not block the request to list the xattrs present.

Switch to ns_capable_noaudit to reflect a more appropriate check.

Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: linux-security-module@vger.kernel.org
Cc: kernel-team@android.com
Cc: stable@vger.kernel.org # v3.18+
Fixes: a082c6f680da ("ovl: filter trusted xattr for non-admin")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg, kmem: do not fail __GFP_NOFAIL charges

commit e55d9d9bfb69405bd7615c0f8d229d8fafb3e9b8 upstream.

Thomas has noticed the following NULL ptr dereference when using cgroup
v1 kmem limit:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
PGD 0
P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 16923 Comm: gtk-update-icon Not tainted 4.19.51 #42
Hardware name: Gigabyte Technology Co., Ltd. Z97X-Gaming G1/Z97X-Gaming G1, BIOS F9 07/31/2015
RIP: 0010:create_empty_buffers+0x24/0x100
Code: cd 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 d4 ba 01 00 00 00 55 53 48 89 fb e8 97 fe ff ff 48 89 c5 48 89 c2 eb 03 48 89 ca <48> 8b 4a 08 4c 09 22 48 85 c9 75 f1 48 89 6a 08 48 8b 43 18 48 8d
RSP: 0018:ffff927ac1b37bf8 EFLAGS: 00010286
RAX: 0000000000000000 RBX: fffff2d4429fd740 RCX: 0000000100097149
RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff9075a99fbe00
RBP: 0000000000000000 R08: fffff2d440949cc8 R09: 00000000000960c0
R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
R13: ffff907601f18360 R14: 0000000000002000 R15: 0000000000001000
FS:  00007fb55b288bc0(0000) GS:ffff90761f8c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000007aebc002 CR4: 00000000001606e0
Call Trace:
 create_page_buffers+0x4d/0x60
 __block_write_begin_int+0x8e/0x5a0
 ? ext4_inode_attach_jinode.part.82+0xb0/0xb0
 ? jbd2__journal_start+0xd7/0x1f0
 ext4_da_write_begin+0x112/0x3d0
 generic_perform_write+0xf1/0x1b0
 ? file_update_time+0x70/0x140
 __generic_file_write_iter+0x141/0x1a0
 ext4_file_write_iter+0xef/0x3b0
 __vfs_write+0x17e/0x1e0
 vfs_write+0xa5/0x1a0
 ksys_write+0x57/0xd0
 do_syscall_64+0x55/0x160
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Tetsuo then noticed that this is because the __memcg_kmem_charge_memcg
fails __GFP_NOFAIL charge when the kmem limit is reached.  This is a wrong
behavior because nofail allocations are not allowed to fail.  Normal
charge path simply forces the charge even if that means to cross the
limit.  Kmem accounting should be doing the same.

Link: http://lkml.kernel.org/r/20190906125608.32129-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Thomas Lindroth <thomas.lindroth@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: Defer init completion for a while after late_initcall

commit 55576cf1853798e86f620766e23b604c9224c19c upstream.

The kernel has no way of knowing when we have finished instantiating
drivers, between deferred probe and systems that build key drivers as
modules we might be doing this long after userspace has booted. This has
always been a bit of an issue with regulator_init_complete since it can
power off hardware that's not had it's driver loaded which can result in
user visible effects, the main case is powering off displays. Practically
speaking it's not been an issue in real systems since most systems that
use the regulator API are embedded and build in key drivers anyway but
with Arm laptops coming on the market it's becoming more of an issue so
let's do something about it.

In the absence of any better idea just defer the powering off for 30s
after late_initcall(), this is obviously a hack but it should mask the
issue for now and it's no more arbitrary than late_initcall() itself.
Ideally we'd have some heuristics to detect if we're on an affected
system and tune or skip the delay appropriately, and there may be some
need for a command line option to be added.

Link: https://lore.kernel.org/r/20190904124250.25844-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alarmtimer: Use EOPNOTSUPP instead of ENOTSUPP

commit f18ddc13af981ce3c7b7f26925f099e7c6929aba upstream.

ENOTSUPP is not supposed to be returned to userspace. This was found on an
OpenPower machine, where the RTC does not support set_alarm.

On that system, a clock_nanosleep(CLOCK_REALTIME_ALARM, ...) results in
"524 Unknown error 524"

Replace it with EOPNOTSUPP which results in the expected "95 Operation not
supported" error.

Fixes: 1c6b39ad3f01 (alarmtimers: Return -ENOTSUPP if no RTC device is present)
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190903171802.28314-1-cascardo@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: zynq: Use memcpy_toio instead of memcpy on smp bring-up

commit b7005d4ef4f3aa2dc24019ffba03a322557ac43d upstream.

This fixes a kernel panic on memcpy when
FORTIFY_SOURCE is enabled.

The initial smp implementation on commit aa7eb2bb4e4a
("arm: zynq: Add smp support")
used memcpy, which worked fine until commit ee333554fed5
("ARM: 8749/1: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE")
enabled overflow checks at runtime, producing a read
overflow panic.

The computed size of memcpy args are:
- p_size (dst): 4294967295 = (size_t) -1
- q_size (src): 1
- size (len): 8

Additionally, the memory is marked as __iomem, so one of
the memcpy_* functions should be used for read/write.

Fixes: aa7eb2bb4e4a ("arm: zynq: Add smp support")
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: Fix use of potentially uninitialized variable

commit 810f3b860850148788fc1ed8a6f5f807199fed65 upstream.

If ipc->ops.reply_msg_match is NULL, we may end up using uninitialized
mask value.

reported by smatch:
sound/soc/intel/common/sst-ipc.c:266 sst_ipc_reply_find_msg() error: uninitialized symbol 'mask'.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-3-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: NHLT: Fix debug print format

commit 855a06da37a773fd073d51023ac9d07988c87da8 upstream.

oem_table_id is 8 chars long, so we need to limit it, otherwise it
may print some unprintable characters into dmesg.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-7-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: sn9c20x: Add MSI MS-1039 laptop to flip_dmi_table

commit 7e0bb5828311f811309bed5749528ca04992af2f upstream.

Like a bunch of other MSI laptops the MS-1039 uses a 0c45:627b
SN9C201 + OV7660 webcam which is mounted upside down.

Add it to the sn9c20x flip_dmi_table to deal with this.

Cc: stable@vger.kernel.org
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Manually calculate reserved bits when loading PDPTRS

commit 16cfacc8085782dab8e365979356ce1ca87fd6cc upstream.

Manually generate the PDPTR reserved bit mask when explicitly loading
PDPTRs.  The reserved bits that are being tracked by the MMU reflect the
current paging mode, which is unlikely to be PAE paging in the vast
majority of flows that use load_pdptrs(), e.g. CR0 and CR4 emulation,
__set_sregs(), etc...  This can cause KVM to incorrectly signal a bad
PDPTR, or more likely, miss a reserved bit check and subsequently fail
a VM-Enter due to a bad VMCS.GUEST_PDPTR.

Add a one off helper to generate the reserved bits instead of sharing
code across the MMU's calculations and the PDPTR emulation.  The PDPTR
reserved bits are basically set in stone, and pushing a helper into
the MMU's calculation adds unnecessary complexity without improving
readability.

Oppurtunistically fix/update the comment for load_pdptrs().

Note, the buggy commit also introduced a deliberate functional change,
"Also remove bit 5-6 from rsvd_bits_mask per latest SDM.", which was
effectively (and correctly) reverted by commit cd9ae5fe47df ("KVM: x86:
Fix page-tables reserved bits").  A bit of SDM archaeology shows that
the SDM from late 2008 had a bug (likely a copy+paste error) where it
listed bits 6:5 as AVL and A for PDPTEs used for 4k entries but reserved
for 2mb entries.  I.e. the SDM contradicted itself, and bits 6:5 are and
always have been reserved.

Fixes: 20c466b56168d ("KVM: Use rsvd_bits_mask in load_pdptrs()")
Cc: stable@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Reported-by: Doug Reiland <doug.reiland@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: set ctxt->have_exception in x86_decode_insn()

commit c8848cee74ff05638e913582a476bde879c968ad upstream.

x86_emulate_instruction() takes into account ctxt->have_exception flag
during instruction decoding, but in practice this flag is never set in
x86_decode_insn().

Fixes: 6ea6e84309ca ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Jan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: always stop emulation on page fault

commit 8530a79c5a9f4e29e6ffb35ec1a79d81f4968ec8 upstream.

inject_emulated_exception() returns true if and only if nested page
fault happens. However, page fault can come from guest page tables
walk, either nested or not nested. In both cases we should stop an
attempt to read under RIP and give guest to step over its own page
fault handler.

This is also visible when an emulated instruction causes a #GP fault
and the VMware backdoor is enabled.  To handle the VMware backdoor,
KVM intercepts #GP faults; with only the next patch applied,
x86_emulate_instruction() injects a #GP but returns EMULATE_FAIL
instead of EMULATE_DONE.   EMULATE_FAIL causes handle_exception_nmi()
(or gp_interception() for SVM) to re-inject the original #GP because it
thinks emulation failed due to a non-VMware opcode.  This patch prevents
the issue as x86_emulate_instruction() will return EMULATE_DONE after
injecting the #GP.

Fixes: 6ea6e84309ca ("KVM: x86: inject exceptions produced by x86_decode_insn")
Cc: stable@vger.kernel.org
Cc: Denis Lunev <den@virtuozzo.com>
Cc: Roman Kagan <rkagan@virtuozzo.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Signed-off-by: Jan Dakinevich <jan.dakinevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Disable HP HSC-PCI Cards to prevent kernel crash

commit 5fa1659105fac63e0f3c199b476025c2e04111ce upstream.

The HP Dino PCI controller chip can be used in two variants: as on-board
controller (e.g. in B160L), or on an Add-On card ("Card-Mode") to bridge
PCI components to systems without a PCI bus, e.g. to a HSC/GSC bus.  One
such Add-On card is the HP HSC-PCI Card which has one or more DEC Tulip
PCI NIC chips connected to the on-card Dino PCI controller.

Dino in Card-Mode has a big disadvantage: All PCI memory accesses need
to go through the DINO_MEM_DATA register, so Linux drivers will not be
able to use the ioremap() function. Without ioremap() many drivers will
not work, one example is the tulip driver which then simply crashes the
kernel if it tries to access the ports on the HP HSC card.

This patch disables the HP HSC card if it finds one, and as such
fixes the kernel crash on a HP D350/2 machine.

Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Phil Scarr <phil.scarr@pm.me>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix missing unlock_page in fuse_writepage()

commit d5880c7a8620290a6c90ced7a0e8bd0ad9419601 upstream.

unlock_page() was missing in case of an already in-flight write against the
same page.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Fixes: ff17be086477 ("fuse: writepage: skip already in flight")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: Do not lose last line in kmsg buffer dump

[ Upstream commit b46eff55ad5bd98e746c0a7022fe7ee071de5fee ]

kmsg_dump_get_buffer() is supposed to select all the youngest log
messages which fit into the provided buffer.  It determines the correct
start index by using msg_print_text() with a NULL buffer to calculate
the size of each entry.  However, when performing the actual writes,
msg_print_text() only writes the entry to the buffer if the written len
is lesser than the size of the buffer.  So if the lengths of the
selected youngest log messages happen to precisely fill up the provided
buffer, the last log message is not included.

We don't want to modify msg_print_text() to fill up the buffer and start
returning a length which is equal to the size of the buffer, since
callers of its other users, such as kmsg_dump_get_line(), depend upon
the current behaviour.

Instead, fix kmsg_dump_get_buffer() to compensate for this.

For example, with the following two final prints:

[    6.427502] AAAAAAAAAAAAA
[    6.427769] BBBBBBBB12345

A dump of a 64-byte buffer filled by kmsg_dump_get_buffer(), before this
patch:

 00000000: 3c 30 3e 5b 20 20 20 20 36 2e 35 32 32 31 39 37  <0>[    6.522197
 00000010: 5d 20 41 41 41 41 41 41 41 41 41 41 41 41 41 0a  ] AAAAAAAAAAAAA.
 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

After this patch:

 00000000: 3c 30 3e 5b 20 20 20 20 36 2e 34 35 36 36 37 38  <0>[    6.456678
 00000010: 5d 20 42 42 42 42 42 42 42 42 31 32 33 34 35 0a  ] BBBBBBBB12345.
 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Link: http://lkml.kernel.org/r/20190711142937.4083-1-vincent.whitchurch@axis.com
Fixes: e2ae715d66bf4bec ("kmsg - kmsg_dump() use iterator to receive log buffer content")
To: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.5+
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: remove games with previous record flags

[ Upstream commit 5aa068ea4082b39eafc356c27c9ecd155b0895f6 ]

The record logging code looks at the previous record flags in various
ways, and they are all wrong.

You can't use the previous record flags to determine anything about the
next record, because they may simply not be related.  In particular, the
reason the previous record was a continuation record may well be exactly
_because_ the new record was printed by a different process, which is
why the previous record was flushed.

So all those games are simply wrong, and make the code hard to
understand (because the code fundamentally cdoes not make sense).

So remove it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Define variables as unsigned long to fix KASAN warning

commit f8659d68e2bee5b86a1beaf7be42d942e1fc81f4 upstream.

Define the working variables to be unsigned long to be compatible with
for_each_set_bit and change types as needed.

While we are at it remove unused variables from a couple of functions.

This was found because of the following KASAN warning:
 ==================================================================
   BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70
   Read of size 8 at addr ffff888362d778d0 by task kworker/u308:2/1889

   CPU: 21 PID: 1889 Comm: kworker/u308:2 Tainted: G W         5.3.0-rc2-mm1+ #2
   Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.02.04.0003.102320141138 10/23/2014
   Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
   Call Trace:
    dump_stack+0x9a/0xf0
    ? find_first_bit+0x19/0x70
    print_address_description+0x6c/0x332
    ? find_first_bit+0x19/0x70
    ? find_first_bit+0x19/0x70
    __kasan_report.cold.6+0x1a/0x3b
    ? find_first_bit+0x19/0x70
    kasan_report+0xe/0x12
    find_first_bit+0x19/0x70
    pma_get_opa_portstatus+0x5cc/0xa80 [hfi1]
    ? ret_from_fork+0x3a/0x50
    ? pma_get_opa_port_ectrs+0x200/0x200 [hfi1]
    ? stack_trace_consume_entry+0x80/0x80
    hfi1_process_mad+0x39b/0x26c0 [hfi1]
    ? __lock_acquire+0x65e/0x21b0
    ? clear_linkup_counters+0xb0/0xb0 [hfi1]
    ? check_chain_key+0x1d7/0x2e0
    ? lock_downgrade+0x3a0/0x3a0
    ? match_held_lock+0x2e/0x250
    ib_mad_recv_done+0x698/0x15e0 [ib_core]
    ? clear_linkup_counters+0xb0/0xb0 [hfi1]
    ? ib_mad_send_done+0xc80/0xc80 [ib_core]
    ? mark_held_locks+0x79/0xa0
    ? _raw_spin_unlock_irqrestore+0x44/0x60
    ? rvt_poll_cq+0x1e1/0x340 [rdmavt]
    __ib_process_cq+0x97/0x100 [ib_core]
    ib_cq_poll_work+0x31/0xb0 [ib_core]
    process_one_work+0x4ee/0xa00
    ? pwq_dec_nr_in_flight+0x110/0x110
    ? do_raw_spin_lock+0x113/0x1d0
    worker_thread+0x57/0x5a0
    ? process_one_work+0xa00/0xa00
    kthread+0x1bb/0x1e0
    ? kthread_create_on_node+0xc0/0xc0
    ret_from_fork+0x3a/0x50

   The buggy address belongs to the page:
   page:ffffea000d8b5dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
   flags: 0x17ffffc0000000()
   raw: 0017ffffc0000000 0000000000000000 ffffea000d8b5dc8 0000000000000000
   raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
   page dumped because: kasan: bad access detected

   addr ffff888362d778d0 is located in stack of task kworker/u308:2/1889 at offset 32 in frame:
    pma_get_opa_portstatus+0x0/0xa80 [hfi1]

   this frame has 1 object:
    [32, 36) 'vl_select_mask'

   Memory state around the buggy address:
    ffff888362d77780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    ffff888362d77800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
   >ffff888362d77880: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 00 00
                                                    ^
    ffff888362d77900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    ffff888362d77980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2

 ==================================================================

Cc: <stable@vger.kernel.org>
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20190911113053.126040.47327.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-tascam: check intermediate state of clock status and retry

commit e1a00b5b253a4f97216b9a33199a863987075162 upstream.

2 bytes in MSB of register for clock status is zero during intermediate
state after changing status of sampling clock in models of TASCAM FireWire
series. The duration of this state differs depending on cases. During the
state, it's better to retry reading the register for current status of
the clock.

In current implementation, the intermediate state is checked only when
getting current sampling transmission frequency, then retry reading.
This care is required for the other operations to read the register.

This commit moves the codes of check and retry into helper function
commonly used for operations to read the register.

Fixes: e453df44f0d6 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-tascam: handle error code when getting current source of clock

commit 2617120f4de6d0423384e0e86b14c78b9de84d5a upstream.

The return value of snd_tscm_stream_get_clock() is ignored. This commit
checks the value and handle error.

Fixes: e453df44f0d6 ("ALSA: firewire-tascam: add PCM functionality")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20190910135152.29800-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / devfreq: passive: fix compiler warning

[ Upstream commit 0465814831a926ce2f83e8f606d067d86745234e ]

The recent commit of
PM / devfreq: passive: Use non-devm notifiers
had incurred compiler warning, "unused variable 'dev'".

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: omap3isp: Set device on omap3isp subdevs

[ Upstream commit e9eb103f027725053a4b02f93d7f2858b56747ce ]

The omap3isp driver registered subdevs without the dev field being set. Do
that now.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: extent-tree: Make sure we only allocate extents from block groups with the same type

[ Upstream commit 2a28468e525f3924efed7f29f2bc5a2926e7e19a ]

[BUG]
With fuzzed image and MIXED_GROUPS super flag, we can hit the following
BUG_ON():

  kernel BUG at fs/btrfs/delayed-ref.c:491!
  invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
  CPU: 0 PID: 1849 Comm: sync Tainted: G           O      5.2.0-custom #27
  RIP: 0010:update_existing_head_ref.cold+0x44/0x46 [btrfs]
  Call Trace:
   add_delayed_ref_head+0x20c/0x2d0 [btrfs]
   btrfs_add_delayed_tree_ref+0x1fc/0x490 [btrfs]
   btrfs_free_tree_block+0x123/0x380 [btrfs]
   __btrfs_cow_block+0x435/0x500 [btrfs]
   btrfs_cow_block+0x110/0x240 [btrfs]
   btrfs_search_slot+0x230/0xa00 [btrfs]
   ? __lock_acquire+0x105e/0x1e20
   btrfs_insert_empty_items+0x67/0xc0 [btrfs]
   alloc_reserved_file_extent+0x9e/0x340 [btrfs]
   __btrfs_run_delayed_refs+0x78e/0x1240 [btrfs]
   ? kvm_clock_read+0x18/0x30
   ? __sched_clock_gtod_offset+0x21/0x50
   btrfs_run_delayed_refs.part.0+0x4e/0x180 [btrfs]
   btrfs_run_delayed_refs+0x23/0x30 [btrfs]
   btrfs_commit_transaction+0x53/0x9f0 [btrfs]
   btrfs_sync_fs+0x7c/0x1c0 [btrfs]
   ? __ia32_sys_fdatasync+0x20/0x20
   sync_fs_one_sb+0x23/0x30
   iterate_supers+0x95/0x100
   ksys_sync+0x62/0xb0
   __ia32_sys_sync+0xe/0x20
   do_syscall_64+0x65/0x240
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

[CAUSE]
This situation is caused by several factors:
- Fuzzed image
  The extent tree of this fs missed one backref for extent tree root.
  So we can allocated space from that slot.

- MIXED_BG feature
  Super block has MIXED_BG flag.

- No mixed block groups exists
  All block groups are just regular ones.

This makes data space_info->block_groups[] contains metadata block
groups.  And when we reserve space for data, we can use space in
metadata block group.

Then we hit the following file operations:

- fallocate
  We need to allocate data extents.
  find_free_extent() choose to use the metadata block to allocate space
  from, and choose the space of extent tree root, since its backref is
  missing.

  This generate one delayed ref head with is_data = 1.

- extent tree update
  We need to update extent tree at run_delayed_ref time.

  This generate one delayed ref head with is_data = 0, for the same
  bytenr of old extent tree root.

Then we trigger the BUG_ON().

[FIX]
The quick fix here is to check block_group->flags before using it.

The problem can only happen for MIXED_GROUPS fs. Regular filesystems
won't have space_info with DATA|METADATA flag, and no way to hit the
bug.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203255
Reported-by: Jungyeon Yoon <jungyeon.yoon@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/realtek - Blacklist PC beep for Lenovo ThinkCentre M73/93

[ Upstream commit 051c78af14fcd74a22b5af45548ad9d588247cc7 ]

Lenovo ThinkCentre M73 and M93 don't seem to have a proper beep
although the driver tries to probe and set up blindly.
Blacklist these machines for suppressing the beep creation.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204635
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ttusb-dec: Fix info-leak in ttusb_dec_send_command()

[ Upstream commit a10feaf8c464c3f9cfdd3a8a7ce17e1c0d498da1 ]

The function at issue does not always initialize each byte allocated
for 'b' and can therefore leak uninitialized memory to a USB device in
the call to usb_bulk_msg()

Use kzalloc() instead of kmalloc()

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+0522702e9d67142379f1@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/powerplay/smu7: enforce minimal VBITimeout (v2)

[ Upstream commit f659bb6dae58c113805f92822e4c16ddd3156b79 ]

This fixes screen corruption/flickering on 75 Hz displays.

v2: make print statement debug only (Alex)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102646
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Ahzo <Ahzo@tutanota.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

e1000e: add workaround for possible stalled packet

[ Upstream commit e5e9a2ecfe780975820e157b922edee715710b66 ]

This works around a possible stalled packet issue, which may occur due to
clock recovery from the PCH being too slow, when the LAN is transitioning
from K1 at 1G link speed.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libertas: Add missing sentinel at end of if_usb.c fw_table

[ Upstream commit 764f3f1ecffc434096e0a2b02f1a6cc964a89df6 ]

This sentinel tells the firmware loading process when to stop.

Reported-and-tested-by: syzbot+98156c174c5a2cad9f8f@syzkaller.appspotmail.com
Signed-off-by: Kevin Easton <kevin@guarana.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: sdhci: Fix incorrect switch to HS mode

[ Upstream commit c894e33ddc1910e14d6f2a2016f60ab613fd8b37 ]

When switching from any MMC speed mode that requires 1.8v
(HS200, HS400 and HS400ES) to High Speed (HS) mode, the system
ends up configured for SDR12 with a 50MHz clock which is an illegal
mode.

This happens because the SDHCI_CTRL_VDD_180 bit in the
SDHCI_HOST_CONTROL2 register is left set and when this bit is
set, the speed mode is controlled by the SDHCI_CTRL_UHS field
in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field
will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling()
because there is no UHS mode being set.

The fix is to change sdhci_set_uhs_signaling() to set the
SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for
any switch to HS mode.

This was found on a new eMMC controller that does strict checking
of the speed mode and the corresponding clock rate. It caused the
switch to HS400 mode to fail because part of the sequence to switch
to HS400 requires a switch from HS200 to HS before going to HS400.

Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dmaengine: Make the pcm->name equal to pcm->id if the name is not set

[ Upstream commit 2ec42f3147e1610716f184b02e65d7f493eed925 ]

Some tools use the snd_pcm_info_get_name() to try to identify PCMs or for
other purposes.

Currently it is left empty with the dmaengine-pcm, in this case copy the
pcm->id string as pcm->name.

For example IGT is using this to find the HDMI PCM for testing audio on it.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Arthur She <arthur.she@linaro.org>
Link: https://lore.kernel.org/r/20190906055524.7393-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding

[ Upstream commit 9e323d45ba94262620a073a3f9945ca927c07c71 ]

With 'extra run-time crypto self tests' enabled, the selftest
for s390-xts fails with

  alg: skcipher: xts-aes-s390 encryption unexpectedly succeeded on
  test vector "random: len=0 klen=64"; expected_error=-22,
  cfg="random: inplace use_digest nosimd src_divs=[2.61%@+4006,
  84.44%@+21, 1.55%@+13, 4.50%@+344, 4.26%@+21, 2.64%@+27]"

This special case with nbytes=0 is not handled correctly and this
fix now makes sure that -EINVAL is returned when there is en/decrypt
called with 0 bytes to en/decrypt.

Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kprobes: Prohibit probing on BUG() and WARN() address

[ Upstream commit e336b4027775cb458dc713745e526fa1a1996b2a ]

Since BUG() and WARN() may use a trap (e.g. UD2 on x86) to
get the address where the BUG() has occurred, kprobes can not
do single-step out-of-line that instruction. So prohibit
probing on such address.

Without this fix, if someone put a kprobe on WARN(), the
kernel will crash with invalid opcode error instead of
outputing warning message, because kernel can not find
correct bug address.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/156750890133.19112.3393666300746167111.stgit@devnote2
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: edma: Do not reset reserved paRAM slots

[ Upstream commit c5dbe60664b3660f5ac5854e21273ea2e7ff698f ]

Skip resetting paRAM slots marked as reserved as they might be used by
other cores.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190823125618.8133-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid1: fail run raid1 array when active disk less than one

[ Upstream commit 07f1a6850c5d5a65c917c3165692b5179ac4cb6b ]

When run test case:
  mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal
  mdadm -S /dev/md1
  mdadm -A /dev/md1 /dev/sd[b-c] --run --force

  mdadm --zero /dev/sda
  mdadm /dev/md1 -a /dev/sda

  echo offline > /sys/block/sdc/device/state
  echo offline > /sys/block/sdb/device/state
  sleep 5
  mdadm -S /dev/md1

  echo running > /sys/block/sdb/device/state
  echo running > /sys/block/sdc/device/state
  mdadm -A /dev/md1 /dev/sd[a-c] --run --force

mdadm run fail with kernel message as follow:
[  172.986064] md: kicking non-fresh sdb from array!
[  173.004210] md: kicking non-fresh sdc from array!
[  173.022383] md/raid1:md1: active with 0 out of 4 mirrors
[  173.022406] md1: failed to create bitmap (-5)

In fact, when active disk in raid1 array less than one, we
need to return fail in raid1_run().

Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (acpi_power_meter) Change log level for 'unsafe software power cap'

[ Upstream commit 6e4d91aa071810deac2cd052161aefb376ecf04e ]

At boot time, the acpi_power_meter driver logs the following error level
message: "Ignoring unsafe software power cap". Having read about it from
a few sources, it seems that the error message can be quite misleading.

While the message can imply that Linux is ignoring the fact that the
system is operating in potentially dangerous conditions, the truth is
the driver found an ACPI_PMC object that supports software power
capping. The driver simply decides not to use it, perhaps because it
doesn't support the object.

The best solution is probably changing the log level from error to warning.
All sources I have found, regarding the error, have downplayed its
significance. There is not much of a reason for it to be on error level,
while causing potential confusions or misinterpretations.

Signed-off-by: Wang Shenran <shenran268@gmail.com>
Link: https://lore.kernel.org/r/20190724080110.6952-1-shenran268@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / PCI: fix acpi_pci_irq_enable() memory leak

[ Upstream commit 29b49958cf73b439b17fa29e9a25210809a6c01c ]

In acpi_pci_irq_enable(), 'entry' is allocated by kzalloc() in
acpi_pci_irq_check_entry() (invoked from acpi_pci_irq_lookup()). However,
it is not deallocated if acpi_pci_irq_valid() returns false, leading to a
memory leak. To fix this issue, free 'entry' before returning 0.

Fixes: e237a5518425 ("x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: custom_method: fix memory leaks

[ Upstream commit 03d1571d9513369c17e6848476763ebbd10ec2cb ]

In cm_write(), 'buf' is allocated through kzalloc(). In the following
execution, if an error occurs, 'buf' is not deallocated, leading to memory
leaks. To fix this issue, free 'buf' before returning the error.

Fixes: 526b4af47f44 ("ACPI: Split out custom_method functionality into an own driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks

[ Upstream commit 5b0eeeaa37615df37a9a30929b73e9defe61ca84 ]

Commit aff138bf8e37 ("ARM: dts: exynos: Add TMU nodes regulator supply
for Peach boards") assigned LDO10 to Exynos Thermal Measurement Unit,
but it turned out that it supplies also some other critical parts and
board freezes/crashes when it is turned off.

The mentioned commit made Exynos TMU a consumer of that regulator and in
typical case Exynos TMU driver keeps it enabled from early boot. However
there are such configurations (example is multi_v7_defconfig), in which
some of the regulators are compiled as modules and are not available
from early boot. In such case it may happen that LDO10 is turned off by
regulator core, because it has no consumers yet (in this case consumer
drivers cannot get it, because the supply regulators for it are not yet
available). This in turn causes the board to crash. This patch restores
'always-on' property for the LDO10 regulator.

Fixes: aff138bf8e37 ("ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libtraceevent: Change users plugin directory

[ Upstream commit e97fd1383cd77c467d2aed7fa4e596789df83977 ]

To be compliant with XDG user directory layout, the user's plugin
directory is changed from ~/.traceevent/plugins to
~/.local/lib/traceevent/plugins/

Suggested-by: Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Patrick McLean <chutzpah@gentoo.org>
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/linux-trace-devel/20190313144206.41e75cf8@patrickm/
Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-4-tz.stoyanov@gmail.com
Link: http://lore.kernel.org/lkml/20190805204355.344622683@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/amd: Silence warnings under memory pressure

[ Upstream commit 3d708895325b78506e8daf00ef31549476e8586a ]

When running heavy memory pressure workloads, the system is throwing
endless warnings,

smartpqi 0000:23:00.0: AMD-Vi: IOMMU mapping error in map_sg (io-pages:
5 reason: -12)
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40
07/10/2019
swapper/10: page allocation failure: order:0, mode:0xa20(GFP_ATOMIC),
nodemask=(null),cpuset=/,mems_allowed=0,4
Call Trace:
 <IRQ>
 dump_stack+0x62/0x9a
 warn_alloc.cold.43+0x8a/0x148
 __alloc_pages_nodemask+0x1a5c/0x1bb0
 get_zeroed_page+0x16/0x20
 iommu_map_page+0x477/0x540
 map_sg+0x1ce/0x2f0
 scsi_dma_map+0xc6/0x160
 pqi_raid_submit_scsi_cmd_with_io_request+0x1c3/0x470 [smartpqi]
 do_IRQ+0x81/0x170
 common_interrupt+0xf/0xf
 </IRQ>

because the allocation could fail from iommu_map_page(), and the volume
of this call could be huge which may generate a lot of serial console
output and cosumes all CPUs.

Fix it by silencing the warning in this call site, and there is still a
dev_err() later to notify the failure.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: fix data units read and written counters in SMART log

[ Upstream commit 3bec2e3754becebd4c452999adb49bc62c575ea4 ]

In nvme spec 1.3 there is a definition for data write/read counters
from SMART log, (See section 5.14.1.2):
This value is reported in thousands (i.e., a value of 1
corresponds to 1000 units of 512 bytes read) and is rounded up.

However, in nvme target where value is reported with actual units,
but not thousands of units as the spec requires.

Signed-off-by: Tom Wu <tomwu@mellanox.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: kpti: ensure patched kernel text is fetched from PoU

[ Upstream commit f32c7a8e45105bd0af76872bf6eef0438ff12fb2 ]

While the MMUs is disabled, I-cache speculation can result in
instructions being fetched from the PoC. During boot we may patch
instructions (e.g. for alternatives and jump labels), and these may be
dirty at the PoU (and stale at the PoC).

Thus, while the MMU is disabled in the KPTI pagetable fixup code we may
load stale instructions into the I-cache, potentially leading to
subsequent crashes when executing regions of code which have been
modified at runtime.

Similarly to commit:

  8ec41987436d566f ("arm64: mm: ensure patched kernel text is fetched from PoU")

... we can invalidate the I-cache after enabling the MMU to prevent such
issues.

The KPTI pagetable fixup code itself should be clean to the PoC per the
boot protocol, so no maintenance is required for this code.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / CPPC: do not require the _PSD method

[ Upstream commit 4c4cdc4c63853fee48c02e25c8605fb65a6c9924 ]

According to the ACPI 6.3 specification, the _PSD method is optional
when using CPPC.  The underlying assumption is that each CPU can change
frequency independently from all other CPUs; _PSD is provided to tell
the OS that some processors can NOT do that.

However, the acpi_get_psd() function returns ENODEV if there is no _PSD
method present, or an ACPI error status if an error occurs when evaluating
_PSD, if present.  This makes _PSD mandatory when using CPPC, in violation
of the specification, and only on Linux.

This has forced some firmware writers to provide a dummy _PSD, even though
it is irrelevant, but only because Linux requires it; other OSPMs follow
the spec.  We really do not want to have OS specific ACPI tables, though.

So, correct acpi_get_psd() so that it does not return an error if there
is no _PSD method present, but does return a failure when the method can
not be executed properly.  This allows _PSD to be optional as it should
be.

Signed-off-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov9650: add a sanity check

[ Upstream commit 093347abc7a4e0490e3c962ecbde2dc272a8f708 ]

As pointed by cppcheck:

[drivers/media/i2c/ov9650.c:706]: (error) Shifting by a negative value is undefined behaviour
[drivers/media/i2c/ov9650.c:707]: (error) Shifting by a negative value is undefined behaviour
[drivers/media/i2c/ov9650.c:721]: (error) Shifting by a negative value is undefined behaviour

Prevent mangling with gains with invalid values.

As pointed by Sylvester, this should never happen in practice,
as min value of V4L2_CID_GAIN control is 16 (gain is always >= 16
and m is always >= 0), but it is too hard for a static analyzer
to get this, as the logic with validates control min/max is
elsewhere inside V4L2 core.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: saa7134: fix terminology around saa7134_i2c_eeprom_md7134_gate()

[ Upstream commit 9d802222a3405599d6e1984d9324cddf592ea1f4 ]

saa7134_i2c_eeprom_md7134_gate() function and the associated comment uses
an inverted i2c gate open / closed terminology.
Let's fix this.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix alignment checkpatch warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cpia2_usb: fix memory leaks

[ Upstream commit 1c770f0f52dca1a2323c594f01f5ec6f1dddc97f ]

In submit_urbs(), 'cam->sbuf[i].data' is allocated through kmalloc_array().
However, it is not deallocated if the following allocation for urbs fails.
To fix this issue, free 'cam->sbuf[i].data' if usb_alloc_urb() fails.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: saa7146: add cleanup in hexium_attach()

[ Upstream commit 42e64117d3b4a759013f77bbcf25ab6700e55de7 ]

If saa7146_register_device() fails, no cleanup is executed, leading to
memory/resource leaks. To fix this issue, perform necessary cleanup work
before returning the error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: exynos-bus: Correct clock enable sequence

[ Upstream commit 2c2b20e0da89c76759ee28c6824413ab2fa3bfc6 ]

Regulators should be enabled before clocks to avoid h/w hang. This
require change in exynos_bus_probe() to move exynos_bus_parse_of()
after exynos_bus_parent_parse_of() and change in error handling.
Similar change is needed in exynos_bus_exit() where clock should be
disabled before regulators.

Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / devfreq: passive: Use non-devm notifiers

[ Upstream commit 0ef7c7cce43f6ecc2b96d447e69b2900a9655f7c ]

The devfreq passive governor registers and unregisters devfreq
transition notifiers on DEVFREQ_GOV_START/GOV_STOP using devm wrappers.

If devfreq itself is registered with devm then a warning is triggered on
rmmod from devm_devfreq_unregister_notifier. Call stack looks like this:

devm_devfreq_unregister_notifier+0x30/0x40
devfreq_passive_event_handler+0x4c/0x88
devfreq_remove_device.part.8+0x6c/0x9c
devm_devfreq_dev_release+0x18/0x20
release_nodes+0x1b0/0x220
devres_release_all+0x78/0x84
device_release_driver_internal+0x100/0x1c0
driver_detach+0x4c/0x90
bus_remove_driver+0x7c/0xd0
driver_unregister+0x2c/0x58
platform_driver_unregister+0x10/0x18
imx_devfreq_platdrv_exit+0x14/0xd40 [imx_devfreq]

This happens because devres_release_all will first remove all the nodes
into a separate todo list so the nested devres_release from
devm_devfreq_unregister_notifier won't find anything.

Fix the warning by calling the non-devm APIS for frequency notification.
Using devm wrappers is not actually useful for a governor anyway: it
relies on the devfreq core to correctly match the GOV_START/GOV_STOP
notifications.

Fixes: 996133119f57 ("PM / devfreq: Add new passive governor")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb-core: fix a memory leak bug

[ Upstream commit fcd5ce4b3936242e6679875a4d3c3acfc8743e15 ]

In dvb_create_media_entity(), 'dvbdev->entity' is allocated through
kzalloc(). Then, 'dvbdev->pads' is allocated through kcalloc(). However, if
kcalloc() fails, the allocated 'dvbdev->entity' is not deallocated, leading
to a memory leak bug. To fix this issue, free 'dvbdev->entity' before
returning -ENOMEM.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hdpvr: add terminating 0 at end of string

[ Upstream commit 8b8900b729e4f31f12ac1127bde137c775c327e6 ]

dev->usbc_buf was passed as argument for %s, but it was not safeguarded
by a terminating 0.

This caused this syzbot issue:

https://syzkaller.appspot.com/bug?extid=79d18aac4bf1770dd050

Reported-and-tested-by: syzbot+79d18aac4bf1770dd050@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: radio/si470x: kill urb on error

[ Upstream commit 0d616f2a3fdbf1304db44d451d9f07008556923b ]

In the probe() function radio->int_in_urb was not killed if an
error occurred in the probe sequence. It was also missing in
the disconnect.

This caused this syzbot issue:

https://syzkaller.appspot.com/bug?extid=2d4fc2a0c45ad8da7e99

Reported-and-tested-by: syzbot+2d4fc2a0c45ad8da7e99@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx7d: cl-som-imx7: make ethernet work again

[ Upstream commit 9846a4524ac90b63496580b7ad50674b40d92a8f ]

Recent changes to the atheros at803x driver caused
ethernet to stop working on this board.
In particular commit 6d4cd041f0af
("net: phy: at803x: disable delay only for RGMII mode")
and commit cd28d1d6e52e
("net: phy: at803x: Disable phy delay for RGMII mode")
fix the AR8031 driver to configure the phy's (RX/TX)
delays as per the 'phy-mode' in the device tree.

This now prevents ethernet from working on this board.

It used to work before those commits, because the
AR8031 comes out of reset with RX delay enabled, and
the at803x driver didn't touch the delay configuration
at all when "rgmii" mode was selected, and because
arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup()
unconditionally enables TX delay.

Since above commits ar8031_phy_fixup() also has no
effect anymore, and the end-result is that all delays
are disabled in the phy, no ethernet.

Update the device tree to restore functionality.

Signed-off-by: André Draszik <git@andred.net>
CC: Ilya Ledvich <ilya@compulab.co.il>
CC: Igor Grinberg <grinberg@compulab.co.il>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Shawn Guo <shawnguo@kernel.org>
CC: Sascha Hauer <s.hauer@pengutronix.de>
CC: Pengutronix Kernel Team <kernel@pengutronix.de>
CC: Fabio Estevam <festevam@gmail.com>
CC: NXP Linux Team <linux-imx@nxp.com>
CC: devicetree@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lpc-enet: fix printk format strings

[ Upstream commit de6f97b2bace0e2eb6c3a86e124d1e652a587b56 ]

compile-testing this driver on other architectures showed
multiple warnings:

  drivers/net/ethernet/nxp/lpc_eth.c: In function 'lpc_eth_drv_probe':
  drivers/net/ethernet/nxp/lpc_eth.c:1337:19: warning: format '%d' expects argument of type 'int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]

  drivers/net/ethernet/nxp/lpc_eth.c:1342:19: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]

Use format strings that work on all architectures.

Link: https://lore.kernel.org/r/20190809144043.476786-10-arnd@arndb.de
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: omap3isp: Don't set streaming state on random subdevs

[ Upstream commit 7ef57be07ac146e70535747797ef4aee0f06e9f9 ]

The streaming state should be set to the first upstream sub-device only,
not everywhere, for a sub-device driver itself knows how to best control
the streaming state of its own upstream sub-devices.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: iop-adma: use correct printk format strings

[ Upstream commit 00c9755524fbaa28117be774d7c92fddb5ca02f3 ]

When compile-testing on other architectures, we get lots of warnings
about incorrect format strings, like:

   drivers/dma/iop-adma.c: In function 'iop_adma_alloc_slots':
   drivers/dma/iop-adma.c:307:6: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]

   drivers/dma/iop-adma.c: In function 'iop_adma_prep_dma_memcpy':
>> drivers/dma/iop-adma.c:518:40: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=]

Use %zu for printing size_t as required, and cast the dma_addr_t
arguments to 'u64' for printing with %llx. Ideally this should use
the %pad format string, but that requires an lvalue argument that
doesn't work here.

Link: https://lore.kernel.org/r/20190809163334.489360-3-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: gspca: zero usb_buf on error

[ Upstream commit 4843a543fad3bf8221cf14e5d5f32d15cee89e84 ]

If reg_r() fails, then gspca_dev->usb_buf was left uninitialized,
and some drivers used the contents of that buffer in logic.

This caused several syzbot errors:

https://syzkaller.appspot.com/bug?extid=397fd082ce5143e2f67d
https://syzkaller.appspot.com/bug?extid=1a35278dd0ebfb3a038a
https://syzkaller.appspot.com/bug?extid=06ddf1788cfd048c5e82

I analyzed the gspca drivers and zeroed the buffer where needed.

Reported-and-tested-by: syzbot+1a35278dd0ebfb3a038a@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+397fd082ce5143e2f67d@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+06ddf1788cfd048c5e82@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: cper: print AER info of PCIe fatal error

[ Upstream commit b194a77fcc4001dc40aecdd15d249648e8a436d1 ]

AER info of PCIe fatal error is not printed in the current driver.
Because APEI driver will panic directly for fatal error, and can't
run to the place of printing AER info.

An example log is as following:
{763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11
{763}[Hardware Error]: event severity: fatal
{763}[Hardware Error]:  Error 0, type: fatal
{763}[Hardware Error]:   section_type: PCIe error
{763}[Hardware Error]:   port_type: 0, PCIe end point
{763}[Hardware Error]:   version: 4.0
{763}[Hardware Error]:   command: 0x0000, status: 0x0010
{763}[Hardware Error]:   device_id: 0000:82:00.0
{763}[Hardware Error]:   slot: 0
{763}[Hardware Error]:   secondary_bus: 0x00
{763}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x10fb
{763}[Hardware Error]:   class_code: 000002
Kernel panic - not syncing: Fatal hardware error!

This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move
cper_print_aer() call out of interrupt context")'. To fix this issue,
this patch adds print of AER info in cper_print_pcie() for fatal error.

Here is the example log after this patch applied:
{24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10
{24}[Hardware Error]: event severity: fatal
{24}[Hardware Error]:  Error 0, type: fatal
{24}[Hardware Error]:   section_type: PCIe error
{24}[Hardware Error]:   port_type: 0, PCIe end point
{24}[Hardware Error]:   version: 4.0
{24}[Hardware Error]:   command: 0x0546, status: 0x4010
{24}[Hardware Error]:   device_id: 0000:01:00.0
{24}[Hardware Error]:   slot: 0
{24}[Hardware Error]:   secondary_bus: 0x00
{24}[Hardware Error]:   vendor_id: 0x15b3, device_id: 0x1019
{24}[Hardware Error]:   class_code: 000002
{24}[Hardware Error]:   aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000
{24}[Hardware Error]:   aer_uncor_severity: 0x00062010
{24}[Hardware Error]:   TLP Header: 000000c0 01010000 00000001 00000000
Kernel panic - not syncing: Fatal hardware error!

Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context")
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[ardb: put parens around terms of && operator]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: don't set In_sync if array is frozen

[ Upstream commit 062f5b2ae12a153644c765e7ba3b0f825427be1d ]

When a disk is added to array, the following path is called in mdadm.

Manage_subdevs -> sysfs_freeze_array
               -> Manage_add
               -> sysfs_set_str(&info, NULL, "sync_action","idle")

Then from kernel side, Manage_add invokes the path (add_new_disk ->
validate_super = super_1_validate) to set In_sync flag.

Since In_sync means "device is in_sync with rest of array", and the new
added disk need to resync thread to help the synchronization of data.
And md_reap_sync_thread would call spare_active to set In_sync for the
new added disk finally. So don't set In_sync if array is in frozen.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: don't call spare_active in md_reap_sync_thread if all member devices can't work

[ Upstream commit 0d8ed0e9bf9643f27f4816dca61081784dedb38d ]

When add one disk to array, the md_reap_sync_thread is responsible
to activate the spare and set In_sync flag for the new member in
spare_active().

But if raid1 has one member disk A, and disk B is added to the array.
Then we offline A before all the datas are synchronized from A to B,
obviously B doesn't have the latest data as A, but B is still marked
with In_sync flag.

So let's not call spare_active under the condition, otherwise B is
still showed with 'U' state which is not correct.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

EDAC/altera: Use the proper type for the IRQ status bits

[ Upstream commit 8faa1cf6ed82f33009f63986c3776cc48af1b7b2 ]

Smatch complains about the cast of a u32 pointer to unsigned long:

  drivers/edac/altera_edac.c:1878 altr_edac_a10_irq_handler()
  warn: passing casted pointer '&irq_status' to 'find_first_bit()'

This code wouldn't work on a 64 bit big endian system because it would
read past the end of &irq_status.

 [ bp: massage. ]

Fixes: 13ab8448d2c9 ("EDAC, altera: Add ECC Manager IRQ controller support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Cc: James Morse <james.morse@arm.com>
Cc: kernel-janitors@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20190624134717.GA1754@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

ia64:unwind: fix double free for mod->arch.init_unw_table

[ Upstream commit c5e5c48c16422521d363c33cfb0dcf58f88c119b ]

The function free_module in file kernel/module.c as follow:

void free_module(struct module *mod) {
......
module_arch_cleanup(mod);
......
module_arch_freeing_init(mod);
......
}

Both module_arch_cleanup and module_arch_freeing_init function
would free the mod->arch.init_unw_table, which cause double free.

Here, set mod->arch.init_unw_table = NULL after remove the unwind
table to avoid double free.

Signed-off-by: chenzefeng <chenzefeng2@huawei.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: Skip bSynchAddress endpoint check if it is invalid

[ Upstream commit 1b34121d9f26d272b0b2334209af6b6fc82d4bf1 ]

The Linux kernel assumes that get_endpoint(alts,0) and
get_endpoint(alts,1) are eachothers feedback endpoints.
To reassure that validity it will test bsynchaddress to comply with that
assumption. But if the bsyncaddress is 0 (invalid), it will flag that as
a wrong assumption and return an error.
Fix: Skip the test if bSynchAddress is 0.
Note: those with a valid bSynchAddress should have a code quirck added.

Signed-off-by: Ard van Breemen <ard@kwaak.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

base: soc: Export soc_device_register/unregister APIs

[ Upstream commit f7ccc7a397cf2ef64aebb2f726970b93203858d2 ]

Qcom Socinfo driver can be built as a module, so
export these two APIs.

Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: iguanair: add sanity checks

[ Upstream commit ab1cbdf159beba7395a13ab70bc71180929ca064 ]

The driver needs to check the endpoint types, too, as opposed
to the number of endpoints. This also requires moving the check earlier.

Reported-by: syzbot+01a77b82edaa374068e1@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: i2c: ak4xxx-adda: Fix a possible null pointer dereference in build_adc_controls()

[ Upstream commit 2127c01b7f63b06a21559f56a8c81a3c6535bd1a ]

In build_adc_controls(), there is an if statement on line 773 to check
whether ak->adc_info is NULL:
    if (! ak->adc_info ||
        ! ak->adc_info[mixer_ch].switch_name)

When ak->adc_info is NULL, it is used on line 792:
    knew.name = ak->adc_info[mixer_ch].selector_name;

Thus, a possible null-pointer dereference may occur.

To fix this bug, referring to lines 773 and 774, ak->adc_info
and ak->adc_info[mixer_ch].selector_name are checked before being used.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda - Show the fatal CORB/RIRB error more clearly

[ Upstream commit dd65f7e19c6961ba6a69f7c925021b7a270cb950 ]

The last fallback of CORB/RIRB communication error recovery is to turn
on the single command mode, and this last resort usually means that
something is really screwed up.  Instead of a normal dev_err(), show
the error more clearly with dev_WARN() with the caller stack trace.

Also, show the bus-reset fallback also as an error, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/apic: Soft disable APIC before initializing it

[ Upstream commit 2640da4cccf5cc613bf26f0998b9e340f4b5f69c ]

If the APIC was already enabled on entry of setup_local_APIC() then
disabling it soft via the SPIV register makes a lot of sense.

That masks all LVT entries and brings it into a well defined state.

Otherwise previously enabled LVTs which are not touched in the setup
function stay unmasked and might surprise the just booting kernel.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.068290579@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/reboot: Always use NMI fallback when shutdown via reboot vector IPI fails

[ Upstream commit 747d5a1bf293dcb33af755a6d285d41b8c1ea010 ]

A reboot request sends an IPI via the reboot vector and waits for all other
CPUs to stop. If one or more CPUs are in critical regions with interrupts
disabled then the IPI is not handled on those CPUs and the shutdown hangs
if native_stop_other_cpus() is called with the wait argument set.

Such a situation can happen when one CPU was stopped within a lock held
section and another CPU is trying to acquire that lock with interrupts
disabled. There are other scenarios which can cause such a lockup as well.

In theory the shutdown should be attempted by an NMI IPI after the timeout
period elapsed. Though the wait loop after sending the reboot vector IPI
prevents this. It checks the wait request argument and the timeout. If wait
is set, which is true for sys_reboot() then it won't fall through to the
NMI shutdown method after the timeout period has finished.

This was an oversight when the NMI shutdown mechanism was added to handle
the 'reboot IPI is not working' situation. The mechanism was added to deal
with stuck panic shutdowns, which do not have the wait request set, so the
'wait request' case was probably not considered.

Remove the wait check from the post reboot vector IPI wait loop and enforce
that the wait loop in the NMI fallback path is invoked even if NMI IPIs are
disabled or the registration of the NMI handler fails. That second wait
loop will then hang if not all CPUs shutdown and the wait argument is set.

[ tglx: Avoid the hard to parse line break in the NMI fallback path,
   add comments and massage the changelog ]

Fixes: 7d007d21e539 ("x86/reboot: Use NMI to assist in shutting down if IRQ fails")
Signed-off-by: Grzegorz Halat <ghalat@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Don Zickus <dzickus@redhat.com>
Link: https://lkml.kernel.org/r/20190628122813.15500-1-ghalat@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Fix CPU controller for !RT_GROUP_SCHED

[ Upstream commit a07db5c0865799ebed1f88be0df50c581fb65029 ]

On !CONFIG_RT_GROUP_SCHED configurations it is currently not possible to
move RT tasks between cgroups to which CPU controller has been attached;
but it is oddly possible to first move tasks around and then make them
RT (setschedule to FIFO/RR).

E.g.:

  # mkdir /sys/fs/cgroup/cpu,cpuacct/group1
  # chrt -fp 10 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  bash: echo: write error: Invalid argument
  # chrt -op 0 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  # chrt -fp 10 $$
  # cat /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  2345
  2598
  # chrt -p 2345
  pid 2345's current scheduling policy: SCHED_FIFO
  pid 2345's current scheduling priority: 10

Also, as Michal noted, it is currently not possible to enable CPU
controller on unified hierarchy with !CONFIG_RT_GROUP_SCHED (if there
are any kernel RT threads in root cgroup, they can't be migrated to the
newly created CPU controller's root in cgroup_update_dfl_csses()).

Existing code comes with a comment saying the "we don't support RT-tasks
being in separate groups". Such comment is however stale and belongs to
pre-RT_GROUP_SCHED times. Also, it doesn't make much sense for
!RT_GROUP_ SCHED configurations, since checks related to RT bandwidth
are not performed at all in these cases.

Make moving RT tasks between CPU controller groups viable by removing
special case check for RT (and DEADLINE) tasks.

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20190719063455.27328-1-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/fair: Fix imbalance due to CPU affinity

[ Upstream commit f6cad8df6b30a5d2bbbd2e698f74b4cafb9fb82b ]

The load_balance() has a dedicated mecanism to detect when an imbalance
is due to CPU affinity and must be handled at parent level. In this case,
the imbalance field of the parent's sched_group is set.

The description of sg_imbalanced() gives a typical example of two groups
of 4 CPUs each and 4 tasks each with a cpumask covering 1 CPU of the first
group and 3 CPUs of the second group. Something like:

{ 0 1 2 3 } { 4 5 6 7 }
        *     * * *

But the load_balance fails to fix this UC on my octo cores system
made of 2 clusters of quad cores.

Whereas the load_balance is able to detect that the imbalanced is due to
CPU affinity, it fails to fix it because the imbalance field is cleared
before letting parent level a chance to run. In fact, when the imbalance is
detected, the load_balance reruns without the CPU with pinned tasks. But
there is no other running tasks in the situation described above and
everything looks balanced this time so the imbalance field is immediately
cleared.

The imbalance field should not be cleared if there is no other task to move
when the imbalance is detected.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1561996022-28829-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: hdpvr: Add device num check and handling

[ Upstream commit d4a6a9537bc32811486282206ecfb7c53754b74d ]

Add hdpvr device num check and error handling

We need to increment the device count atomically before we checkout a
device to make sure that we do not reach the max count, otherwise we get
out-of-bounds errors as reported by syzbot.

Reported-and-tested-by: syzbot+aac8d0d7205f112045d2@syzkaller.appspotmail.com
Signed-off-by: Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>