git.stricted.de - GitHub/exynos8895/android_kernel_samsung

keucr: migrate printk to dev_dbg/info/warn/err

as per suggestion of checkpatch.pl; this resolves warnings like "Prefer
netdev_info .. then dev_info .. to printk".
Changed signature of function usb_stor_print_cmd in init.c to enable
usage of dev_err

Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com>
Signed-off-by: Johannes Schilling <of82ecuq@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

keucr: use more specific max_t(int, ..

as advised by checkpatch, changed generic max(..) to max_t(int, ..

Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com>
Signed-off-by: Johannes Schilling <of82ecuq@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

keucr: remove some unneccesary typedefs

resolves checkpatch.pl warning "do not add new typedefs" and renames allcaps
structures.

Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com>
Signed-off-by: Johannes Schilling <of82ecuq@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: cleanup libcfs_kkuc_msg_put a bit

No need to cast count since it is already ssize_t. No need
to cast payload to const, but need __force instead to avoid
Sparse complaining.

Reported-and-Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdc: fix procfs fops

mdc_kuc_fops is missing open/release handlers. I fixed it before but
somehow forgot to amend to the patch sent out. Sorry...

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Revert "staging/lustre: drop CONFIG_BROKEN dependency""

This reverts commit 37d4093fd34775bbbf99bddb84a711bdb3ec6d5c.

I've verified that we now don't break build on X86_64 allmodconfig.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: cleanup linux-crypto

We don't need to implement crc32 and crc32pclmul on our own.
The crc32-pclmul support was merged into the 3.8 kernel in commit
78c37d1, no need to keep a local copy in Lustre anymore.
The crc32 implementation is identical to crypto-crc32. So drop
Lustre's private implementation and select kernel crypto in Kconfig.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: surround module_refcount with CONFIG_MODULE_UNLOAD

module_refcount() is not available when CONFIG_MODULE_UNLOAD is off.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/libcfs: restore LINVRNT

It was mistakenly removed by coan. Add it back and also with a new
Kconfig option to enable it.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove lu_context_keys_dump and lu_debugging_setup

There are no callers of them. Besides, lu_context_keys_dump breaks
build when CONFIG_MODULES is not set.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: call set_cpus_allowed_ptr instead of set_cpus_allowed

set_cpus_allowed is not available with CONFIG_CPUMASK_OFFSTACK on.
We should call set_cpus_allowed_ptr instead.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: replace macro rx_hal_is_cck_rate() in r8192U_core.c

This patch replaces macro rx_hal_is_cck_rate() with
the static inline function rx_hal_is_cck_rate().

This replacement was suggested by Dan Carpenter and
has the following benefits:
- improves code readability
- guarantees type safety
- improves code efficiency by enforcing the evaluation of
  the simple boolean expression (!pdrvinfo->RxHT) to be
  done before the evaluation of the more complex one
  (pdrvinfo->RxRate == DESC90_RATE1M ||
   pdrvinfo->RxRate == DESC90_RATE2M ||
   pdrvinfo->RxRate == DESC90_RATE5_5M ||
   pdrvinfo->RxRate == DESC90_RATE11M)

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove trailing whitespace in r8192U_core.c

This patch fixes the following checkpatch error:
ERROR: trailing whitespace

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove space before '++' in r8192U_core.c

This patch fixes the following checkpatch error:
ERROR: space prohibited before that '++'

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove space after reference '&' in r8192U_core.c

This patch fixes the following checkpatch error:
ERROR: space prohibited after that '&'

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: add spaces around ?:&&|| in r8192U_core.c

This patch fixes the following checkpatch errors:
ERROR: spaces required around that '?'
ERROR: spaces required around that ':'
ERROR: spaces required around that '&&'
ERROR: spaces required around that '||'

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix return statements in r8192U_core.c

This patch fixes the following checkpatch error:
ERROR: return is not a function, parentheses are not required

Also, fixes the spaces in return statements to
improve code readability.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix spaces in array indexing in r8192U_core.c

This patch fixes the following checkpatch error:
ERROR: space prohibited before open square bracket '['

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: remove duplicated include from octeon-hcd.c

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: tidy up multi-line comments

Tidy up the multi-line comments at the beginning of the file to
follow the CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: return 0 for successful attach

Return 0 instead of 1 to indicate a successful attach.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: remove 'IOSIZE' define

This define has a very generic name. Its only used in one place
so instead of renaming it just remove it and open code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: tidy up zero_chans()

Rename the function so it has namespace associated with the driver.

For aesthetic reasons, move the function closer to it's only caller.

Pass the comedi_subdevice pointer to the function so we can get the
number of channels to reset from it instead of using the 'CHANS'
define.

Remove the 'CHANS' define since it's a very generic name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: remove {LSB,MSB}_PORT macros

These macros rely on a local variable having a specific name.
Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: cleanup pcmda12_ao_insn_write()

Only the last value needs to be saved for readback.

Remove the LSB and MSB macros.

(*insn_write) functions should return an errno or the number of
samples actually read. Change the final return to insn->n to
make this clear.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: cleanup pcmda12_ao_insn_read()

Remove the boilerplate comment from the 'skel' driver.

To initiate the simultaneaous transfer, only one analog output
register needs to be read. Move the read out of the for() loop.

(*insn_read) functions should return an errno or the number of
samples actually read. Change the final return to insn->n to
make this clear.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: rename the analog output (*insn_{read, write}) functions

For aesthetic reasons. rename these functions so they have namespace
associated with the driver. Also remove the unnecessary '&' when setting
the callbacks.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: tidy up subdevice init

For aesthetic reasons. add some whitespace to the subdevice init
and reorder it a bit.

Remove the 's->private = NULL', it was kzalloc'ed by the core and
will already be NULL.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: tidy up comedi_lrange table

Tidy up the whitespace in the comedi_lrange table.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmda12: remove 'BITS' define

'BITS' is a pretty generic name for a define. It's only used in
the board attach to set the subdevice 'maxdata' so instead of
renaming the define just open code the value and remove the define.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: fix the last > 80 char line warning

Fix the last checkpatch.pl warning in this file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove the pcmuio_dio_insn_bits() debug noise

These dev_dbg() and printk() messages are just development noise.
Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: fix > 80 char line warnings

Cleanup some comments to fix the checkpatch.pl warnings about lines
over 80 characters.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove some boilerplate comments

These comments are boilerplate from the 'skel' driver. Just remove
them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: tidy up the boardinfo

Remove the boilerplate comment about the boardinfo struct.

For aesthetic reasons, move the boardinfo declaration near the
struct definition.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: tidy up driver #define's

Add some whitespace to the #defines to make them more readable.
Tidy up the comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove 'CALC_N_SUBDEVS' macro

This macro is only used once in the driver, just remove it.

This also fixes a > 80 char line checkpatch.pl warning.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: tidy up the multi-line comments

Tidy up the multi-line comments at the beginning of the file to
follow the CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: refactor interrupt_pcmuio()

Refactor this function into two new functions in order to reduce the indent
levels and clean up the ugly line breaks that, unsuccessfully, try to keep
the lines < 80 chars.

The first function handles the irq for a specific asic.

The second function handles the irq for a specific subdevice that is
associated with the asic.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: remove 'subpriv' macro

The 'subpriv' macro relies on a local variable having a specific name.
Replace the macro with a local variable where used.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: fix typos in Kconfig

Signed-off-by: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: WIMAX_GDM72XX should depend on either USB or MMC

The gdm72xx driver needs to have either the USB or SDIO implementation
enabled to provide useful functionalities, so the driver should depend
on either USB or MMC. This patch makes WIMAX_GDM72XX depend on either
USB or MMC.

Also, WIMAX_GDM72XX needs to be built as a module if its dependent
interface, either USB or MMC, is built as a module. This patch enforces
that in the WIMAX_GDM72XX_USB and WIMAX_GDM72XX_SDIO dependency.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ben Chan <benchan@chromium.org>
Cc: Sage Ahn <syahn@gctsemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/asus_oled fixed linebreak and printk issue

fixed a linebreak within an error message string coding style
issue reported by checkpatch.pl and dev_err format parameters

Signed-off-by: Matthias Schid <aircrach115@gmail.com>
Signed-off-by: Stefan Huber <steffhip@googlemail.com>
Signed-off-by: Simon Puels <simon.puels@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/asus_oled fixed alignment in defines

replaced spaces in incorrect alignment in defines with tabs

Signed-off-by: Matthias Schid <aircrach115@gmail.com>
Signed-off-by: Stefan Huber <steffhip@googlemail.com>
Signed-off-by: Simon Puels <simon.puels@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: call device_unregister when platform_device_register_simple fails

device_register is called before platform_device_register_simple gets called.
unregister and reset the octeon_usb_registered variable

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: check return value of platform_device_register_simple

the return value is a pointer having an error set. we have to check for
IS_ERR and return PTR_ERR when appropriate

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: fix more checkpatch errors/warns

place the opening brace right after the if, else, else if, switch
statements.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: more checkpatch fixes

place the opening brace right after the if,else, else if,switch
statements.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: fix checkpatch error

this places the opening braces just after the if, else, elseif, switch
statements

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-usb: place opening braces of structs, enums on top

this fixes coding style problem, placing of the braces just right after the
struct name, not below the struct name.

this reduces the errors reported by checkpatch script from

total: 1496 errors, 2133 warnings, 3344 lines checked

to

total: 1488 errors, 2132 warnings, 3336 lines checked

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "staging/lustre: drop CONFIG_BROKEN dependency"

This reverts commit 52f6317528c6877c8c5d4b2ab7a04430af99ed4a.

It's still broken, especially for a simple build on x86 with 'make
allmodconfig'

As no fixes seem forthcoming, just mark it broken.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lprocfs: interpret result of dt_statfs() correctly

I accidentally reversed the sense of the error check after the call to
dt_statfs() in lprocfs_dt_rd_{blksize,{files,kbytes}{free,avail}.
Unreverse the error checking.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3300
Lustre-change: http://review.whamcloud.com/6385
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Robert Read <robert.read@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_daq_700: fix some trailing whitespace errors

checkpatch.pl reports 2 errors about trailing whitespace in this file.
Fix them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Kconfig: COMEDI_S526 is a PC/104 board not a PCI board

The Sensoray Model 526 board is a PC/104 style board not a PCI board.
Move it into the correct group in the Kconfig and Makefile.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix identation in r8192U_core.c

This patch fixes identation and alignment in r8192U_core.c.
Also, removes spaces from idents when applicable.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove unnecessary line continuations in r8192U_core.c

This patch fixes the following checkpatch warning:
WARNING: Avoid unnecessary line continuations

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix function definitions' style in r8192U_core.c

This patch fixes the function definitions' style in order
to be uniform across the file and in compliance with the
linux kernel coding style.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: fix braces in r8192U_core.c

This patch fixes the position of braces and removes
redundant braces, following the kernel coding style
conventions.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove dead and commented-out code in r8192U_core.c

This cleanup patch removes commented-out code and
the functions rtl8192_dump_reg() and print_buffer()
which are not called anywhere in the driver.

Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Reviewed-by: Dan Carpenter<dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ozwpan: replace alloc_skb with dev_alloc_skb in ozpd.c"

This reverts commit 812eb995d4c0795ea1fb431146523cace2693f49.

I shouldn't have applied it, my fault...

Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ozwpan: replace alloc_skb with dev_alloc_skb in ozproto.c"

This reverts commit c3147965384f1a5ace685dc34e78f9bb201f357d.

I shouldn't have applied it, my fault.

Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ozwpan: replace kfree_skb with dev_kfree_skb in ozpd.c"

This reverts commit 91c6c4bdb241cd27082cfa130675a2cd52cda5a4.

It wasn't supposed to be applied, my fault.

Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ozwpan: replace kfree_skb with dev_kfree_skb in ozproto.c"

This reverts commit 5109c8a0c17cea53975ebf6dbc5403c431fd809d.

I shouldn't have applied this, my fault...

Cc: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: sync: fix up a sparse warning

Fix up a sparse warning about sync_dump that was reported.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Erik Gilling <konkers@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: MIPS: add Octeon USB HCD support

Add support for Octeon USB HCD. Tested on EdgeRouter Lite with USB
mass storage.

The driver has been extracted from GPL sources of EdgeRouter Lite firmware
(based on Linux 2.6.32.13). Some minor fixes and cleanups have been done
to make it work with 3.10-rc3.

$ uname -a
Linux (none) 3.10.0-rc3-edge-00005-g86cb5bc #41 SMP PREEMPT Sat Jun 1 20:41:46 EEST 2013 mips64 GNU/Linux
$ modprobe octeon-usb
[   37.971683] octeon_usb: module is from the staging directory, the quality is unknown, you have been warned.
[   37.983649] OcteonUSB: Detected 1 ports
[   37.999360] OcteonUSB OcteonUSB.0: Octeon Host Controller
[   38.004847] OcteonUSB OcteonUSB.0: new USB bus registered, assigned bus number 1
[   38.012332] OcteonUSB OcteonUSB.0: irq 122, io mem 0x00000000
[   38.019970] hub 1-0:1.0: USB hub found
[   38.023851] hub 1-0:1.0: 1 port detected
[   38.028101] OcteonUSB: Registered HCD for port 0 on irq 122
[   38.391443] usb 1-1: new high-speed USB device number 2 using OcteonUSB
[   38.586922] usb-storage 1-1:1.0: USB Mass Storage device detected
[   38.597375] scsi0 : usb-storage 1-1:1.0
[   39.604111] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
[   39.619113] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
[   39.630696] sd 0:0:0:0: [sda] Write Protect is off
[   39.635945] sd 0:0:0:0: [sda] No Caching mode page present
[   39.641464] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.651341] sd 0:0:0:0: [sda] No Caching mode page present
[   39.656917] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.664296]  sda: sda1 sda2
[   39.675574] sd 0:0:0:0: [sda] No Caching mode page present
[   39.681093] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   39.687223] sd 0:0:0:0: [sda] Attached SCSI removable disk

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: btmtk_usb: use GFP_KERNEL inplace of GFP_ATOMIC in _probe path

the _probe function doesn't run in interrupt context, so no need to use
the GFP_ATOMIC allocations, instead driver can request for GFP_KERNEL

Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: Check for unsuccessful allocation immediately

Check to see if allocation by kzalloc() or usb_alloc_urb() was unsuccessful
immediately after the allocation. Exit from the function can be right at that
point in case of allocation failure.
This avoids unnecessary use of usb_alloc_urb() & usb_free_urb() if kzalloc()
returns NULL.
Also, makes the code better structured & easier to understand.

Signed-off-by: Harsh Kumar <harsh1kumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dwc2: remove redundant D0 power state set

Pci_enable_device() will set device power state to D0,
so it's no need to do it again in dwc2_driver_probe().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: crystalhd: remove an unneeded NULL check

We already established earlier in the function that "temp" is
non-NULL. We also don't need to set to NULL because it's a stack
variable an we return immediately.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: Use correct USB transfer interval to fix syslog spamming

Using correct transfer interval as specified by the USB endpoint
when doing the interrupt transfer fixes the warning printed by
xhci USB core on every transfer that resulted in spamming
"xhci_queue_intr_tx: 74 callbacks suppressed" to syslog
every 5 seconds.

Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5139: Fix SD card detection on Samsung NP730U3E Ultrabook

The timeout detection implemented in this driver isn't very
robust. Although the USB interrupt transfer was successful,
the polling thread often reported timeouts because the 50ms
had expired before it got scheduled, and the SD card wasn't
detected. Increasing it to 100ms, as used in other places of
this driver, makes it work.

Signed-off-by: Marcus Overhagen <marcus.overhagen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: fix return value check in libcfs_sock_ioctl()

In case of error, the function sock_alloc_file() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: clean up and remove libcfs/linux/linux-mem.c

Those are simple wrappers for numa allocator. We don't need them.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove empty file libcfs/linux/linux-lock.c

It was emptied by coan. So drop it.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove libcfs/linux/linux-utils.c

It is not used any more.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove empty file libcfs/linux/linux-sync.c

It was emptied by coan. So we no longer need it.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: silence gcc build warning

got bellow build warning that is indeed a false alarm.

  CC [M]  drivers/staging/lustre/lustre/llite/llite_nfs.o
  drivers/staging/lustre/lustre/libcfs/nidstrings.c: In function ‘
  libcfs_str2net_internal’:
  drivers/staging/lustre/lustre/libcfs/nidstrings.c:432:17: warning: ‘nf’ may be
  used uninitialized in this function [-Wuninitializ
  ed]

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: clean up and remove libcfs/linux/linux-fs.c

filp_user_write() is open coded in libcfs_kkuc_msg_put(). All
other functions/macros have no user at all. So we can remove
the file.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: llite: add module alias

So that sys_mount can find and load lustre module automatically.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: silence lockdep warning in ll_md_blocking_ast

Got bellow lockdep warning during tests. It is false alarm though.

[ 1184.479097] =============================================
[ 1184.479187] [ INFO: possible recursive locking detected ]
[ 1184.479277] 3.10.0-rc3+ #13 Tainted: G         C
[ 1184.479355] ---------------------------------------------
[ 1184.479444] mkdir/2215 is trying to acquire lock:
[ 1184.479521]  (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc27c>] ll_md_blocking_ast+0x55c/0x655 [lustre]
[ 1184.479801]
but task is already holding lock:
[ 1184.479895]  (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre]
[ 1184.480101]
other info that might help us debug this:
[ 1184.480206]  Possible unsafe locking scenario:

[ 1184.480300]        CPU0
[ 1184.480340]        ----
[ 1184.480380]   lock(&(&dentry->d_lock)->rlock);
[ 1184.480458]   lock(&(&dentry->d_lock)->rlock);
[ 1184.480536]
*** DEADLOCK ***

[ 1184.480761]  May be due to missing lock nesting notation

[ 1184.480936] 4 locks held by mkdir/2215:
[ 1184.481037]  #0:  (sb_writers#11){.+.+.+}, at: [<ffffffff811531a9>] mnt_want_write+0x24/0x4b
[ 1184.481273]  #1:  (&type->i_mutex_dir_key#3/1){+.+.+.}, at: [<ffffffff81144fce>] kern_path_create+0x8c/0x144
[ 1184.481513]  #2:  (&sb->s_type->i_lock_key#19){+.+...}, at: [<ffffffffa06cc180>] ll_md_blocking_ast+0x460/0x655 [lustre]
[ 1184.481778]  #3:  (&(&dentry->d_lock)->rlock){+.+...}, at: [<ffffffffa06cc1b1>] ll_md_blocking_ast+0x491/0x655 [lustre]
[ 1184.482050]

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: remove empty file lustre/ptlrpc/nrs_orr.c

It is used by server only and we had it emptied with coan.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: check ostid if no OBD_CONNECT_FID

in lustre_set_wire_obdo, if "ocd->ocd_connect_flags" doesn't contain
OBD_CONNECT_FID, use "ost_id" to check the type of the object
instead of using ost_id.oi_fid only.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3360
Lustre-change: http://review.whamcloud.com/6426
Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/tests: check nr_local in ofd_preprw()

This patch checks the number of bulk I/O RPC pages with
PTLRPC_MAX_BRW_PAGES in ofd_preprw() to avoid
LASSERT(iobuf->dr_npages < iobuf->dr_max_pages) occurring
while larger I/O size is specified.

The patch also fixes echo_client_prep_commit() to reuse
the env context so as to avoid LASSERT(info->fti_exp == NULL)
occurring while the bulk I/O size is larger than
PTLRPC_MAX_BRW_SIZE.

The patch also improves obdfilter-survey to handle the
case while interoprating with old server.

[picked echo client part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2598
Lustre-change: http://review.whamcloud.com/6394
Signed-off-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: fixed a typo in osc_cache_truncate_start

Dump osc_extent waiting instead of ext in case error occurred.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3359
Lustre-change: http://review.whamcloud.com/6402
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: Always build 64bit ino internally

Always build 64bit ino internally except the client is mounted
with "32bitapi" option, so client will always use 64bit ino
internally. It will build 32bit ino, only if application requires
32 bit ino.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3318
Lustre-change: http://review.whamcloud.com/6371
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Ned Bass <bass6@llnl.gov>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/mdt: set ATTR_xTIME_SET to make atime update properly

To make atime update properly between 1.8 client and 2.x server,
this patch includes the following fixes:
- if MDS_ATTR_xTIME is set without MDS_ATTR_xTIME_SET and the client
  does not have OBD_CONNECT_FULL20, convert it to LA_xTIME in
  mdt_setattr_unpack().
- set both MDS_ATTR_xTIME | MDS_ATTR_xTIME_SET for timestamps in
  ll_prepare_close(). This allows us to fix the server-side timestamp
  setting in the future.
- remove attr_unpack() and convert the flags from MDS_ATTR_ to LA_*
  directly in mdt_attr_valid_xlate() instead.
- improve sanityn.sh test_23().

[picked llite part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3036
Lustre-change: http://review.whamcloud.com/6327
Signed-off-by: Liu Ying <emoly.liu@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/changelog: fix CL_LAYOUT comment, string

Fix the CL_LAYOUT comment, since it is possible that layout swap
could be used in cases where the file content is changed. I don't
think there are any real world use cases for this, but that depends
on what tools are being used on the filesystem.

Also change the "LAYOUT" string for this ChangeLog record type to
be "LYOUT" to match the convention of other strings to only be
5 characters long.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3279
Lustre-change: http://review.whamcloud.com/6338
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ost: Ensure dirty flushed on fiemap ioctl

Data corruption is possible if cp(coreutils) uses FIEMAP to obtain
data holes in shared file, since there could be dirty cache on
other clients which hasn't been flushed back.

To ensure all the dirty on remote clients being flushed back on
fiemap ioctl, we'd acquire ldlm lock on server side for fiemap,
unless the local client (which invoke fiemap) has cached lock.

[picked osc part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3219
Xyratex-bug-id: MRP-1001
Lustre-change: http://review.whamcloud.com/6127
Signed-off-by: Artem Blagodarenko <artem_blagodarenko@xyratex.com>
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/changelog: fix CL_LAYOUT, accept all types

In order to avoid compatibility issues with older ChangeLog consumers,
change the new CL_LAYOUT record to use the value previously assigned
to CL_IOCTL.  The CL_IOCTL type was never used anywhere, and it didn't
really make any sense as a ChangeLog record, since it could really
mean anything at all.

The changelog_show_cb() function is renamed to changelog_kkuc_cb(),
since it is really about consuming the ChangeLog and passing it up to
the kernel-user-coms interface.  At some point we should consider to
implement a DBUS-based ChangeLog interface as well.

The changelog_kkuc_cb() "sanity check" on cr_type was removed, since
there is no reason the client kernel needs to know every record type
that is being passed to userspace.  It is up to the client tool to
determine what records that it can process.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3279
Lustre-change: http://review.whamcloud.com/6308
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lprocfs: use stats counter index for *pos

In lprocfs_stats_seq_{start,next,show,stop}() encode the counter index
(rather than the counter address) into *pos. Doing so simplifies these
functions and fixes a bug in the case of per-CPU stats where no stats
would be displayed at all if no events had yet occurred on CPU 0.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2979
Lustre-change: http://review.whamcloud.com/6328
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ost: check pre 2.4 echo client in obdo validation

Because old echo client still uses o_id/o_seq for objid,
but new echo client will uses FID for the objid. Add
OBD_CONNECT_FID for 2.4 echo client, so 2.4 OST will
convert o_id/o_seq to FID if the request from old echo
client.

Add local flag OBD_FL_OSTID for o_flags to indicate
OST does not support FID yet, then echo client will
still send o_id/o_seq to OST.

cleanup ost_validate_obdo

[picked client part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3187
Lustre-change: http://review.whamcloud.com/6287
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llog: Do not use ostid swab for llogid

Since logid still use id/seq format in the request,
it will be swabbed by its own swab func, instead of
using ostid swab, which might see logid as FID incorrectly.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3302
Lustre-change: http://review.whamcloud.com/6305
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: use common way to store lastid

Local files last id are stored in root in files named seq-xxx-lastid
while lastid for OST objects is stored in O/seq/LAST_ID special
object with zero OID and handled by OSD.
Patch reworks local files lastid to be stored in O/seq/LAST_ID too
and using the same format.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2886
Lustre-change: http://review.whamcloud.com/6199
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Signed-off-by: James Nunez <james.a.nunez@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lov: only dump header in lsm_lmm_verify

If lsm_lmm_verify_*() find an error in the lov_mds_md header
structure, don't dump the full stripe information, since this
can be totally bogus (e.g. if stripe_count == -1 or similar).
Instead, just dump the header information for debugging.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3271
Lustre-change: http://review.whamcloud.com/6261
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: John Hammond <johnlockwoodhammond@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/obdclass: remove obsoleted md_local_file.c

This library is not used anymore and is replaced by
local_storage.c. Patch removed last remnants of it.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2886
Lustre-change: http://review.whamcloud.com/6107
Signed-off-by: Mikhail Pershin <mike.pershin@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/osc: some cleanup to reduce stack overflow chance

ptlrpcd_add_req() will wake_up other process, do not hold a spinlock
before calling ptlrpcd_queue_work()->ptlrpcd_add_req().

If current process is allocating memory, memory shrinker could get to
osc_lru_del(), don't call osc_lru_shrink() further since it could
lead a long calling chain.

Use static string OES_STRINGS in OSC_EXTENT_DUMP() to reduce stack
footprint.

Alloc crattr on heap for osc_build_rpc() to reduce stack footprint.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3281
Lustre-change: http://review.whamcloud.com/6270
Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/ldlm: suppress useless lock RPC for layout

In ldlm_lock_decref_internal() when l_lvb_data is freed to
reduce memory consumption, LDLM_FL_LVB_READY is not
cleared, so later when the lock is reused lvb is not
updated. But clearing LDLM_FL_LVB_READY forces layout refetch
at each file access, so the better is to remove the optimization.
The use case is after a restore in HSM.

Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3280
Lustre-change: http://review.whamcloud.com/6268
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Revert "LU-2139 osc: Track and limit "unstable" pages"

This seems to be causing multiple issues: LU-3274, LU-3277

[The original commit is folded in the large Lusre patch. So we don't
have an exact commit to revert for kernel client -- Peng Tao]
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/debug: quiet noisy console error messages

Quiet a number of overly noisy and unhelpful console error
messages. Improve the format of other nearby errors.

In the case of {lod,lov}_fix_desc_stripe_size(), this doesn't
even need a console message unless it is actually changing
some stripe size that is below the minimum. Typically it is
only zero and is being bumped up to the default value.

[picked lov part for upstream kernel submission]
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1095
Lustre-change: http://review.whamcloud.com/6264
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>